[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#655322: apt: debdelta-upgrade not working in APT::Periodic



Package: apt
Version: 0.8.15.9
Severity: normal

Dear Maintainer,
I set up /etc/apt/apt.conf.d/02periodic with
APT::Periodic::Download-Upgradeable-Packages-Debdelta "1";
but only apt-get update would run and no packages were downloaded
(or debdelta-upgrade(d))

So I added
APT::Periodic::Download-Upgradeable-Packages "1";
in case it was a case of misleading documentation and that was needed
but then anacron simply ran 'apt-get -qq -y -d dist-upgrade'
and downloaded everything so the debdelta-upgrade option isn't working
in this version of apt (I didn't try the one in experimental).

BTW, just mentioning, I have the option
APT::Periodic::Aquire::http::Dl-Limit "650";
set too but it didn't work either (the packages were downloaded with
my full Internet speed of 1Mb/s - 125KB/s).
Since this option isn't among the examples in /etc/cron.daily/apt
I don't know if it should work or not.

Last, just mentioning that /etc/cron.daily/apt has a little typo
when it says that the default cache directory is /var/apt/cache
instead of /var/cache/apt (that's why it was annexed here, it was
the only change I made to it).


-- Package-specific info:

-- apt-config dump --

APT "";
APT::Architecture "i386";
APT::Build-Essential "";
APT::Build-Essential:: "build-essential";
APT::Install-Recommends "true";
APT::Install-Suggests "0";
APT::Authentication "";
APT::Authentication::TrustCDROM "true";
APT::NeverAutoRemove "";
APT::NeverAutoRemove:: "^firmware-linux.*";
APT::NeverAutoRemove:: "^linux-firmware$";
APT::NeverAutoRemove:: "^linux-image.*";
APT::NeverAutoRemove:: "^kfreebsd-image.*";
APT::NeverAutoRemove:: "^linux-restricted-modules.*";
APT::NeverAutoRemove:: "^linux-ubuntu-modules-.*";
APT::NeverAutoRemove:: "^gnumach$";
APT::NeverAutoRemove:: "^gnumach-image.*";
APT::Never-MarkAuto-Sections "";
APT::Never-MarkAuto-Sections:: "metapackages";
APT::Never-MarkAuto-Sections:: "restricted/metapackages";
APT::Never-MarkAuto-Sections:: "universe/metapackages";
APT::Never-MarkAuto-Sections:: "multiverse/metapackages";
APT::Never-MarkAuto-Sections:: "oldlibs";
APT::Never-MarkAuto-Sections:: "restricted/oldlibs";
APT::Never-MarkAuto-Sections:: "universe/oldlibs";
APT::Never-MarkAuto-Sections:: "multiverse/oldlibs";
APT::Periodic "";
APT::Periodic::Enable "1";
APT::Periodic::Update-Package-Lists "1";
APT::Periodic::Download-Upgradeable-Packages "1";
APT::Periodic::Download-Upgradeable-Packages-Debdelta "1";
APT::Periodic::AutocleanInterval "1";
APT::Periodic::Aquire "";
APT::Periodic::Aquire::http "";
APT::Periodic::Aquire::http::Dl-Limit "650";
APT::Architectures "";
APT::Architectures:: "i386";
Dir "/";
Dir::State "var/lib/apt/";
Dir::State::lists "lists/";
Dir::State::cdroms "cdroms.list";
Dir::State::mirrors "mirrors/";
Dir::State::extended_states "extended_states";
Dir::State::status "/var/lib/dpkg/status";
Dir::Cache "var/cache/apt/";
Dir::Cache::archives "archives/";
Dir::Cache::srcpkgcache "srcpkgcache.bin";
Dir::Cache::pkgcache "pkgcache.bin";
Dir::Etc "etc/apt/";
Dir::Etc::sourcelist "sources.list";
Dir::Etc::sourceparts "sources.list.d";
Dir::Etc::vendorlist "vendors.list";
Dir::Etc::vendorparts "vendors.list.d";
Dir::Etc::main "apt.conf";
Dir::Etc::netrc "auth.conf";
Dir::Etc::parts "apt.conf.d";
Dir::Etc::preferences "preferences";
Dir::Etc::preferencesparts "preferences.d";
Dir::Etc::trusted "trusted.gpg";
Dir::Etc::trustedparts "trusted.gpg.d";
Dir::Bin "";
Dir::Bin::methods "/usr/lib/apt/methods";
Dir::Bin::dpkg "/usr/bin/dpkg";
Dir::Media "";
Dir::Media::MountPath "/media/apt";
Dir::Log "var/log/apt";
Dir::Log::Terminal "term.log";
Dir::Log::History "history.log";
Dir::Ignore-Files-Silently APT::Periodic::Aquire::http::Dl-Limit "650";"";
Dir::Ignore-Files-Silently:: "~$";
Dir::Ignore-Files-Silently:: "\.disabled$";
Dir::Ignore-Files-Silently:: "\.bak$";
Dir::Ignore-Files-Silently:: "\.dpkg-[a-z]+$";
Dir::Ignore-Files-Silently:: "\.save$";
Dir::Ignore-Files-Silently:: "\.orig$";
Acquire "";
Acquire::cdrom "";
Acquire::cdrom::mount "/media/cdrom/";
Acquire::Languages "";
Acquire::Languages:: "en";
Acquire::Languages:: "none";
DPkg "";
DPkg::Pre-Install-Pkgs "";
DPkg::Pre-Install-Pkgs:: "/usr/bin/apt-listchanges --apt || test $? -ne 10";
DPkg::Pre-Install-Pkgs:: "/usr/sbin/dpkg-preconfigure --apt || true";
DPkg::Tools "";
DPkg::Tools::Options "";
DPkg::Tools::Options::/usr/bin/apt-listchanges "";
DPkg::Tools::Options::/usr/bin/apt-listchanges::Version "2";
CommandLine "";
CommandLine::AsString "apt-config dump";

-- (no /etc/apt/preferences present) --


-- (/etc/apt/sources.list present, but not submitted) --


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.1.0-1-486
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages apt depends on:
ii  debian-archive-keyring  2010.08.28
ii  gnupg                   1.4.11-3
ii  libc6                   2.13-24
ii  libgcc1                 1:4.6.2-11
ii  libstdc++6              4.6.2-11
ii  zlib1g                  1:1.2.3.4.dfsg-3

apt recommends no packages.

Versions of packages apt suggests:
ii  apt-doc         <none>
ii  aptitude        0.6.4-1.2
ii  bzip2           1.0.6-1
ii  dpkg-dev        1.16.1.2
ii  python-apt      0.8.3
ii  synaptic        0.75.4
ii  xz-lzma [lzma]  5.1.1alpha+20110809-3

-- Configuration Files:
/etc/cron.daily/apt changed:
check_stamp()
{
    stamp="$1"
    interval="$2"
    if [ $interval -eq 0 ]; then
	debug_echo "check_stamp: interval=0"
	# treat as no time has passed
        return 1
    fi
    if [ ! -f $stamp ]; then
	debug_echo "check_stamp: missing time stamp file: $stamp."
	# treat as enough time has passed
        return 0
    fi
    # compare midnight today to midnight the day the stamp was updated
    stamp_file="$stamp"
    stamp=$(date --date=$(date -r $stamp_file --iso-8601) +%s 2>/dev/null)
    if [ "$?" != "0" ]; then
        # Due to some timezones returning 'invalid date' for midnight on
        # certain dates (eg America/Sao_Paulo), if date returns with error
        # remove the stamp file and return 0. See coreutils bug:
        # http://lists.gnu.org/archive/html/bug-coreutils/2007-09/msg00176.html
        rm -f "$stamp_file"
        return 0
    fi
    now=$(date --date=$(date --iso-8601) +%s 2>/dev/null)
    if [ "$?" != "0" ]; then
        # As above, due to some timezones returning 'invalid date' for midnight
        # on certain dates (eg America/Sao_Paulo), if date returns with error
        # return 0.
        return 0
    fi
    delta=$(($now-$stamp))
    # intervall is in days, convert to sec.
    interval=$(($interval*60*60*24))
    debug_echo "check_stamp: interval=$interval, now=$now, stamp=$stamp, delta=$delta (sec)"
    # remove timestamps a day (or more) in the future and force re-check
    if [ $stamp -gt $(($now+86400)) ]; then
         echo "WARNING: file $stamp_file has a timestamp in the future: $stamp"
         rm -f "$stamp_file"
         return 0
    fi
    if [ $delta -ge $interval ]; then
        return 0
    fi
    return 1
}
update_stamp()
{
    stamp="$1"
    touch $stamp
}
check_size_constraints()
{
    MaxAge=0
    eval $(apt-config shell MaxAge APT::Archives::MaxAge)
    eval $(apt-config shell MaxAge APT::Periodic::MaxAge)
    MinAge=2
    eval $(apt-config shell MinAge APT::Archives::MinAge)
    eval $(apt-config shell MinAge APT::Periodic::MinAge)
    MaxSize=0
    eval $(apt-config shell MaxSize APT::Archives::MaxSize)
    eval $(apt-config shell MaxSize APT::Periodic::MaxSize)
    Cache="/var/cache/apt/archives/"
    eval $(apt-config shell Cache Dir::Cache::archives/d)
    # sanity check
    if [ -z "$Cache" ]; then
	echo "empty Dir::Cache::archives, exiting"
	exit
    fi
    # check age
    if [ ! $MaxAge -eq 0 ] && [ ! $MinAge -eq 0 ]; then
	debug_echo "aged: ctime <$MaxAge and mtime <$MaxAge and ctime>$MinAge and mtime>$MinAge"
	find $Cache -name "*.deb"  \( -mtime +$MaxAge -and -ctime +$MaxAge \) -and -not \( -mtime -$MinAge -or -ctime -$MinAge \) -print0 | xargs -r -0 rm -f
    elif [ ! $MaxAge -eq 0 ]; then
	debug_echo "aged: ctime <$MaxAge and mtime <$MaxAge only"
	find $Cache -name "*.deb"  -ctime +$MaxAge -and -mtime +$MaxAge -print0 | xargs -r -0 rm -f
    else
	debug_echo "skip aging since MaxAge is 0"
    fi
    # check size
    if [ ! $MaxSize -eq 0 ]; then
	# maxSize is in MB
	MaxSize=$(($MaxSize*1024))
	#get current time
	now=$(date --date=$(date --iso-8601) +%s)
	MinAge=$(($MinAge*24*60*60))
	# reverse-sort by mtime
	for file in $(ls -rt $Cache/*.deb 2>/dev/null); do
	    du=$(du -s $Cache)
	    size=${du%%/*}
	    # check if the cache is small enough
	    if [ $size -lt $MaxSize ]; then
		debug_echo "end remove by archive size:  size=$size < $MaxSize"
		break
	    fi
	    # check for MinAge of the file
	    if [ $MinAge -ne 0 ]; then
		# check both ctime and mtime
		mtime=$(stat -c %Y $file)
		ctime=$(stat -c %Z $file)
		if [ $mtime -gt $ctime ]; then
		    delta=$(($now-$mtime))
		else
		    delta=$(($now-$ctime))
		fi
		if [ $delta -le $MinAge ]; then
		    debug_echo "skip remove by archive size:  $file, delta=$delta < $MinAgeSec"
		    break
		else
		    # delete oldest file
		    debug_echo "remove by archive size: $file, delta=$delta >= $MinAgeSec (sec), size=$size >= $MaxSize"
		    rm -f $file
		fi
	    fi
	done
    fi
}
do_cache_backup()
{
    BackupArchiveInterval="$1"
    if [ $BackupArchiveInterval -eq 0 ]; then
	return
    fi
    # Set default values and normalize
    CacheDir="/var/cache/apt"
    eval $(apt-config shell CacheDir Dir::Cache/d)
    CacheDir=${CacheDir%/}
    if [ -z "$CacheDir" ]; then
	debug_echo "practically empty Dir::Cache, exiting"
	return 0
    fi
    Cache="${CacheDir}/archives/"
    eval $(apt-config shell Cache Dir::Cache::Archives/d)
    if [ -z "$Cache" ]; then
	debug_echo "practically empty Dir::Cache::archives, exiting"
	return 0
    fi
    BackupLevel=3
    eval $(apt-config shell BackupLevel APT::Periodic::BackupLevel)
    if [ $BackupLevel -le 1 ]; then
	BackupLevel=2 ;
    fi
    Back="${CacheDir}/backup/"
    eval $(apt-config shell Back Dir::Cache::Backup/d)
    if [ -z "$Back" ]; then
	echo "practically empty Dir::Cache::Backup, exiting" 1>&2
	return
    fi
    CacheArchive="$(basename "${Cache}")"
    test -n "${CacheArchive}" || CacheArchive="archives"
    BackX="${Back}${CacheArchive}/"
    for x in $(seq 0 1 $((${BackupLevel}-1))); do
	eval "Back${x}=${Back}${x}/"
    done
    # backup after n-days if archive contents changed.
    # (This uses hardlink to save disk space)
    BACKUP_ARCHIVE_STAMP=/var/lib/apt/periodic/backup-archive-stamp
    if check_stamp $BACKUP_ARCHIVE_STAMP $BackupArchiveInterval; then
	if [ $({(cd $Cache 2>/dev/null; find . -name "*.deb"); (cd $Back0 2>/dev/null;find . -name "*.deb") ;}| sort|uniq -u|wc -l) -ne 0 ]; then
	    mkdir -p $Back
	    rm -rf $Back$((${BackupLevel}-1))
	    for y in $(seq $((${BackupLevel}-1)) -1 1); do
		eval BackY=${Back}$y
		eval BackZ=${Back}$(($y-1))
		if [ -e $BackZ ]; then
		    mv -f $BackZ $BackY ;
		fi
	    done
	    cp -la $Cache $Back ; mv -f $BackX $Back0
	    update_stamp $BACKUP_ARCHIVE_STAMP
	    debug_echo "backup with hardlinks. (success)"
	else
	    debug_echo "skip backup since same content."
	fi
    else
	debug_echo "skip backup since too new."
    fi
}
random_sleep()
{
    RandomSleep=1800
    eval $(apt-config shell RandomSleep APT::Periodic::RandomSleep)
    if [ $RandomSleep -eq 0 ]; then
	return
    fi
    if [ -z "$RANDOM" ] ; then
        # A fix for shells that do not have this bash feature.
	RANDOM=$(dd if=/dev/urandom count=1 2> /dev/null | cksum | cut -c"1-5")
    fi
    TIME=$(($RANDOM % $RandomSleep))
    debug_echo "sleeping for $TIME seconds"
    sleep $TIME
}
debug_echo()
{
    # Display message if $VERBOSE >= 1
    if [ "$VERBOSE" -ge 1 ]; then
	echo $1 1>&2
    fi
}
check_power(){
    # laptop check, on_ac_power returns:
    #       0 (true)    System is on main power
    #       1 (false)   System is not on main power
    #       255 (false) Power status could not be determined
    # Desktop systems always return 255 it seems
    if which on_ac_power >/dev/null; then
        on_ac_power
        POWER=$?
        if [ $POWER -eq 1 ]; then
	    debug_echo "exit: system NOT on main power"
	    return 1
        elif [ $POWER -ne 0 ]; then
	    debug_echo "power status ($POWER) undetermined, continuing"
        fi
        debug_echo "system is on main power."
    fi
    return 0
}
if cd /var/backups ; then
    if ! cmp -s apt.extended_states.0 /var/lib/apt/extended_states; then
	cp -p /var/lib/apt/extended_states apt.extended_states
	savelog -c 7 apt.extended_states >/dev/null
    fi
fi
if ! which apt-config >/dev/null ; then
	exit 0
fi
AutoAptEnable=1  # default is yes
eval $(apt-config shell AutoAptEnable APT::Periodic::Enable)
if [ $AutoAptEnable -eq 0 ]; then
    exit 0
fi
VERBOSE=0
eval $(apt-config shell VERBOSE APT::Periodic::Verbose)
debug_echo "verbose level $VERBOSE"
if [ "$VERBOSE" -le 2 ]; then
    # quiet for 0,1,2
    XSTDOUT=">/dev/null"
    XSTDERR="2>/dev/null"
    XAPTOPT="-qq"
    XUUPOPT=""
else
    XSTDOUT=""
    XSTDERR=""
    XAPTOPT=""
    XUUPOPT="-d"
fi
if [ "$VERBOSE" -ge 3 ]; then
    # trace output
    set -x
fi
check_power || exit 0
if which apt-get >/dev/null && ! eval apt-get check -f $XAPTOPT $XSTDERR ; then
    debug_echo "error encountered in cron job with \"apt-get check\"."
    exit 0
fi
now=$(date +%s)
UpdateInterval=0
eval $(apt-config shell UpdateInterval APT::Periodic::Update-Package-Lists)
DownloadUpgradeableInterval=0
eval $(apt-config shell DownloadUpgradeableInterval APT::Periodic::Download-Upgradeable-Packages)
UnattendedUpgradeInterval=0
eval $(apt-config shell UnattendedUpgradeInterval APT::Periodic::Unattended-Upgrade)
AutocleanInterval=0
eval $(apt-config shell AutocleanInterval APT::Periodic::AutocleanInterval)
BackupArchiveInterval=0
eval $(apt-config shell BackupArchiveInterval APT::Periodic::BackupArchiveInterval)
Debdelta=1
eval $(apt-config shell Debdelta APT::Periodic::Download-Upgradeable-Packages-Debdelta)
if [ $UpdateInterval -eq 0 ] &&
   [ $DownloadUpgradeableInterval -eq 0 ] &&
   [ $UnattendedUpgradeInterval -eq 0 ] &&
   [ $BackupArchiveInterval -eq 0 ] &&
   [ $AutocleanInterval -eq 0 ]; then
    # check cache size
    check_size_constraints
    exit 0
fi
do_cache_backup $BackupArchiveInterval
random_sleep
check_power || exit 0
if [ -r /etc/default/locale ]; then
    . /etc/default/locale
    export LANG LANGUAGE LC_MESSAGES LC_ALL
fi
UPDATED=0
UPDATE_STAMP=/var/lib/apt/periodic/update-stamp
if check_stamp $UPDATE_STAMP $UpdateInterval; then
    if eval apt-get $XAPTOPT -y update $XSTDERR; then
	debug_echo "download updated metadata (success)."
	if which dbus-send >/dev/null && pidof dbus-daemon >/dev/null; then
	    if dbus-send --system / app.apt.dbus.updated boolean:true ; then
		debug_echo "send dbus signal (success)"
	    else
		debug_echo "send dbus signal (error)"
	    fi
	else
	    debug_echo "dbus signal not send (command not available)"
	fi
	update_stamp $UPDATE_STAMP
	UPDATED=1
    else
	debug_echo "download updated metadata (error)"
    fi
else
    debug_echo "download updated metadata (not run)."
fi
DOWNLOAD_UPGRADEABLE_STAMP=/var/lib/apt/periodic/download-upgradeable-stamp
if [ $UPDATED -eq 1 ] && check_stamp $DOWNLOAD_UPGRADEABLE_STAMP $DownloadUpgradeableInterval; then
    if [ $Debdelta -eq 1 ]; then
        debdelta-upgrade >/dev/null 2>&1 || true
    fi
    if  eval apt-get $XAPTOPT -y -d dist-upgrade $XSTDERR; then
	update_stamp $DOWNLOAD_UPGRADEABLE_STAMP
	debug_echo "download upgradable (success)"
    else
	debug_echo "download upgradable (error)"
    fi
else
    debug_echo "download upgradable (not run)"
fi
UPGRADE_STAMP=/var/lib/apt/periodic/upgrade-stamp
if which unattended-upgrade >/dev/null && check_stamp $UPGRADE_STAMP $UnattendedUpgradeInterval; then
    if unattended-upgrade $XUUPOPT; then
	update_stamp $UPGRADE_STAMP
	debug_echo "unattended-upgrade (success)"
    else
	debug_echo "unattended-upgrade (error)"
    fi
else
    debug_echo "unattended-upgrade (not run)"
fi
AUTOCLEAN_STAMP=/var/lib/apt/periodic/autoclean-stamp
if check_stamp $AUTOCLEAN_STAMP $AutocleanInterval; then
    if  eval apt-get $XAPTOPT -y autoclean $XSTDERR; then
	debug_echo "autoclean (success)."
	update_stamp $AUTOCLEAN_STAMP
    else
	debug_echo "autoclean (error)"
    fi
else
    debug_echo "autoclean (not run)"
fi
check_size_constraints


-- no debconf information



Reply to: