[Git][xorg-team/lib/libinput][debian-unstable] 93 commits: util-list.h: simplify code by removing an excess initialization

["Timo Aaltonen (@tjaalton)" <tjaalton@debian.org>]

Title: GitLab

Timo Aaltonen pushed to branch debian-unstable at X Strike Force / lib / libinput

Commits:

• 3f2c4834
  by Konstantin Kharlamov at 2021-03-02T09:07:42+03:00

  util-list.h: simplify code by removing an excess initialization
  
  The assignment of zero is done to work around false-positives of
  coverity about uninitialized variable usage. Getting rid of it inside
  the macro will allow in later commit to declare a variable inside
  `for-loop` rather than outside of it.
  
  Do it by declaring a new list_first_entry_by_type helper which accepts a
  type rather than a variable.
  
  Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
  

• 3d3d9b7f
  by Konstantin Kharlamov at 2021-03-02T09:10:35+03:00

  treewide: get rid of `tmp` argument in list_for_each_safe
  
  Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
  

• 5e69c5f9
  by Pedro Ribeiro at 2021-03-02T23:07:48+00:00

  Add Lenovo Legion 5 keyboard to 50-system-lenovo.quirks
  
  Signed-off-by: Pedro Ribeiro <pedrib@gmail.com>

• c00c5cb6
  by weizhixiang at 2021-03-08T20:59:20+00:00

  replace strncmp with strneq for safety-check
  
  Signed-off-by: weizhixiang <weizhixiang@uniontech.com>
  

• 40b83b11
  by Peter Hutterer at 2021-03-10T09:54:07+10:00

  completion: add missing libinput analyze subtools to the zsh completions
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• fe30bea3
  by Peter Hutterer at 2021-03-10T00:24:51+00:00

  tools/per-slot-delta: print the button state too while analyzing
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• f17ef2d5
  by Peter Hutterer at 2021-03-10T00:24:51+00:00

  tools/per-slot-delta: handle KeyboardInterrupts nicely
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• de706612
  by Peter Hutterer at 2021-03-10T03:48:21+00:00

  util: document our list interface
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• c71fa066
  by Peter Hutterer at 2021-03-11T10:40:00+10:00

  tools/debug-gui: start the unaccelerated motion deltas in the screen center
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• e99f5942
  by Peter Hutterer at 2021-03-11T10:40:00+10:00

  tools/debug-gui: move the pointer position into a struct point
  
  No functional change
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 1926a66f
  by Peter Hutterer at 2021-03-11T10:40:00+10:00

  tools/debug-gui: move the abs pointer position into a struct point
  
  No functional changes
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 39b64107
  by Peter Hutterer at 2021-03-11T10:40:00+10:00

  tools/debug-gui: draw a sprite for the unaccelerated pointer as well
  
  Add a second grey v-shaped (upside down triangle) pointer that moves around
  with the unaccelerated deltas. This makes it easier to visualize how the
  unaccelerated pointer moves around, the snake helps for some use-cases but not
  all of them.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 31d20acd
  by Peter Hutterer at 2021-03-11T16:32:59+10:00

  test: fix two inadvertent pointer jumps in a test
  
  Got papered over by bugs in the implementation and didn't trigger the jump
  detection or movement detection otherwise.
  
  Related to #578
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 832c346b
  by Peter Hutterer at 2021-03-11T16:32:59+10:00

  test: add a comment to the thumb speed test
  
  Incorrect comment, the purpose of this test was to ensure that an unused slot
  doesn't affect how other touches are treated, see commit 928bad9.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 42d6fed8
  by Peter Hutterer at 2021-03-11T16:33:00+10:00

  touchpad: always push a touch's current point to the motion history
  
  The way touchpads (generally) work is that they get the position of each
  finger on each scanout. The kernel filters touches that haven't moved to
  reduce bandwidth so any touch that is logically down that we don't see an
  update for is in the same position as during the last scanout.
  
  Previously, touches that didn't sent events were effectively ignored, causing
  our jump detection to fail:
  - time t0: touch moves to position x/y, motion history time is set to t0
  - time t1..t5: touch remains at position for several frames, no updates to the
    motion history
  - time t6: touch jumps to position x+a/y+b
    - tp_detect_jumps() sees the last update time is t0 which is too long ago
      and exits without detecting a jump
  
  This is fixed by pushing to the motion history any time we have *any* update -
  if the touchpad notices a state change on any touch update all touches with
  their current position, whether it changed or not.
  
  This obsoletes the `time` field in the tp_touch struct, most of this patch is
  passing down the current time to the few users of t->time.
  
  Fixes #578
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 3427b457
  by Peter Hutterer at 2021-03-15T16:15:57+10:00

  test: localize a few variables
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• cbff56e6
  by Peter Hutterer at 2021-03-15T16:17:19+10:00

  test: update a few tests for more modern helpers
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 1d0dbd24
  by Peter Hutterer at 2021-03-16T06:03:56+00:00

  filter: correct comments about the threshold's unit
  
  See d6e531349745ff38ae457169d5089ea61297accf for confirmation that the
  threshold is intended to be in mm/s, the comment here is simply a leftover from
  earlier times when the acceleration method was using device-units only.
  
  Fixes #585
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 2f8dab45
  by Peter Hutterer at 2021-03-16T21:29:56+00:00

  doc/user: explain why we are doing motion normalization
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 5129d178
  by Peter Hutterer at 2021-03-16T21:29:56+00:00

  test: fix debugging messages for gesture begin event
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• dee0e5e7
  by Peter Hutterer at 2021-03-16T21:29:56+00:00

  test: simplify the helper for moving three touches at the same time
  
  There's no test case where we need to do something immediately after the last
  event so we might as well do everything in the same loop.
  
  This also fixes a bug where the first movement would usually get swallowed.
  Test cases in general put the finger down at x/y, then move them to some other
  position. We'd expect the first event in a loop to happen at x+n/y+n, not at
  x/y again.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 1d9cdf76
  by Peter Hutterer at 2021-03-16T21:29:56+00:00

  test: push/pop event frames around three-touch movements
  
  Without this, each finger movement happens in a different evdev event frame.
  Since we average deltas for gestures, this messes with the expected data.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 60d5172e
  by Alexander Mikhaylenko at 2021-03-16T21:29:56+00:00

  gestures: Filter unaccelerated deltas for gestures
  
  Make sure the unaccelerated deltas are comparable to scroll deltas.
  
  edit by whot:
  The original intention of the unaccelerated motion data here was to provide
  both accelerated and unaccelerated motion for gestures so it was possible to
  have 1:1 mapping from gesture motion to screen activity.
  
  Normalizing to 1000dpi this way would've worked for mice but touchpad
  acceleration also includes the TP_MAGIC_SLOWDOWN (amongst other tricks) which
  slows down motion to around 27% *before* applying the acceleration function.
  On a 1000dpi touchpad (~40 units/mm) simply normalizing touchpad motion to
  1000dpi results in pointer motion that is way too fast, it's lacking that
  slowdown to 27% of original speed.
  
  This results in the accelerated and unaccelerated gesture data being in
  effectively two different coordinate systems with the caller having no ability
  to relate the two.
  
  Switching to the special constant acceleration applies that slowdown and
  matches the data to the part of the acceleration curve where no (additional)
  acceleration is applied.
  
  It makes the gesture unaccelerated data comparable to the accelerated data
  and to scroll data which uses the same process.
  
  Fixes #582
  
  Signed-off-by: Alexander Mikhaylenko <alexm@gnome.org>
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 83b3670c
  by Peter Hutterer at 2021-03-16T21:29:56+00:00

  tests: add a gesture test to ensure our unaccel deltas are in a sane range
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 5f00c32d
  by Greg V at 2021-03-17T02:34:30+00:00

  quirks: recognize SPI bus
  
  Apple MacBooks (Broadwell/Skylake/Kaby Lake and Apple Silicon)
  use SPI to communicate with the keyboard and trackpad.
  
  Signed-off-by: Greg V <greg@unrelenting.technology>
  

• d8b1a773
  by Greg V at 2021-03-17T02:34:30+00:00

  quirks: add quirks for Apple SPI input devices
  
  The Linux applespi driver currently uses the Synaptics vendor ID
  on the trackpad for some reason (even though, at least from bcm5974
  we only know that Broadcom is involved..) but my upcoming FreeBSD driver
  uses the Apple vendor ID everywhere, so add two quirks.
  
  Signed-off-by: Greg V <greg@unrelenting.technology>
  

• 6941f740
  by Greg V at 2021-03-17T02:34:30+00:00

  quirks: implement DMI support on FreeBSD
  
  FreeBSD does not use Linux modaliases, so we have to generate these strings.
  Unfortunately for us, the data in kenv has the chassis type pre-parsed into
  a nice string, so we have to match these strings back into numbers.
  Only relevant types are included to avoid bloating the code.
  
  Signed-off-by: Greg V <greg@unrelenting.technology>
  

• 06697b5e
  by Greg V at 2021-03-17T02:34:30+00:00

  quirks: add wildcard to HID-over-I2C names (for FreeBSD)
  
  The FreeBSD HID stack adds the device type to the evdev name,
  so we get e.g. "ACPI0C50:00 18D1:5028 TouchPad".
  
  (Maybe this shouldn't be matched by name at all though...)
  
  Signed-off-by: Greg V <greg@unrelenting.technology>
  

• 0f79fe66
  by JoseExposito at 2021-03-17T03:23:56+00:00

  fallback: replace fallback_dispatch->wheel with an anonymous struct
  
  The current fallback_dispatch wheel struct, a device_coords, doesn't allow to
  save extra information.
  The new anonymous struct will allow to add a is_inhibited field to disable mouse
  scroll while the middle button is pressed and, potentially, any required extra
  state in the future.
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• cd4f2f32
  by JoseExposito at 2021-03-17T03:23:56+00:00

  fallback: disable mouse scroll wheel while middle button is pressed
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• 2babdba1
  by JoseExposito at 2021-03-19T08:37:02+01:00

  tools/code-formatting: Add EditorConfig file
  
  EditorConfig helps maintain consistent coding styles for multiple developers
  working on the same project across various editors and IDEs:
  https://editorconfig.org/
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• 0828fdce
  by Peter Hutterer at 2021-03-26T10:12:40+10:00

  tools/record: factor out the output file collection
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 8b822a84
  by Peter Hutterer at 2021-03-26T10:12:40+10:00

  tools/record: de-duplicate an error message
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• e511f962
  by Peter Hutterer at 2021-03-26T10:12:40+10:00

  tools/record: localize a variable
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 4da9349a
  by Peter Hutterer at 2021-03-26T10:12:40+10:00

  tools/record: free the namelist when we're done
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 7f4df04d
  by Peter Hutterer at 2021-03-30T08:26:30+10:00

  tools/record: deduplicate the device opening logic
  
  With a new helper function strv_from_argv we can re-use the device opening
  loop for all the use-cases we have.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 9011f918
  by Peter Hutterer at 2021-03-30T08:33:49+10:00

  tools/record: switch the output file from an fd to a FILE*
  
  This is prep work to be more consistent with the use of tempfile later for
  individual devices.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 632eedad
  by Peter Hutterer at 2021-03-30T08:33:49+10:00

  tools/record: mark the iprintf function as printf
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 0cdf4596
  by Peter Hutterer at 2021-03-30T09:02:31+10:00

  tools/record: get rid of indent push/pop, replace with fixed indents
  
  Our file format is static enough that we don't need to use push/pop, we know
  exactly which line is going where. So let's replace it with a static
  indent instead.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 0b23cb1b
  by Peter Hutterer at 2021-03-30T09:02:31+10:00

  tools/record: append the devices in-order
  
  Using list_insert() here means the last device specified on the commandline is
  the one that ends up in the file first - not very obvious...
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 7957f198
  by Peter Hutterer at 2021-03-30T09:02:31+10:00

  tools/record: remember the first device in the context
  
  No functional changes since we can get this easily from the list itself, but
  in the future the first device will be used more extensively.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• bacf4e5a
  by Peter Hutterer at 2021-03-30T09:02:31+10:00

  tools/record: rename the output file handling
  
  Less confusing than having output_file, out_file, and outfile.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 33b30d46
  by Peter Hutterer at 2021-03-30T09:02:31+10:00

  tools/record: rework the event printing
  
  For historical (but not very good) reasons, libinput record printed events
  from the first device to the output file (or stdout) and buffered everything
  else. On ctrl+c, the other devices' descriptions and the buffered events were
  appended to the output file.
  
  This makes the printing code rather complex. Simplify it by giving each device
  a separate FILE* - the first device points to the real output file, the others
  to a tempfile. On Ctrl+C we just append those tempfiles to the real output
  file one-by-one and done.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 943e258c
  by Peter Hutterer at 2021-03-30T09:02:31+10:00

  tools/record: line up the "neutral state" message
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 74f6821d
  by Ben Weston at 2021-04-03T23:24:33+01:00

  quirk: fix sensitivity for Dell Latitude 7490 pointing-stick
  
  Signed-off-by: Ben Weston <b.weston60@gmail.com>
  

• c71a1f43
  by JoseExposito at 2021-04-06T05:10:32+00:00

  touchpad/clickfinger: limit middle click to 3 fingers
  
  Don't middle click on clickpads with click method clickfinger when more than
  3 fingers are used.
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• f723b282
  by Jonas Ådahl at 2021-04-06T16:33:42+02:00

  tablet-pad-leds: Open led file with O_NONBLOCK | O_CLOEXEC
  
  We don't want the file to be left open after any fork/exec, and we don't
  want the read to be blocking; so open it as such.
  
  Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
  

• 95a72990
  by Peter Hutterer at 2021-04-07T12:38:25+10:00

  evdev: don't check the event time if it's higher than the dispatch time
  
  The dispatch time is taken during libinput_dispatch(), i.e. at the beginning
  of an event sequence. We always read all events off the device, so where
  events come in while we're inside the main dispatch loop, our event time may
  be later than the saved dispatch_time. This causes an uint underflow and our
  tdelta > 10 will be true for that case.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 04dc67e0
  by Peter Hutterer at 2021-04-09T10:14:47+10:00

  evdev: don't truncate event time to 32 bits
  
  This causes a bunch of "your system is too slow" messages in e.g. the various
  gesture tests.
  
  Fixes 95a72990
  Fixes #601
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 9ce8d561
  by Chris Dickson at 2021-04-09T11:17:24-05:00

  quirks: mark the 0x252 razer keyboard as internal
  
  Signed-off-by: Chris Dickson <hobochili@pm.me>
  

• b64a60a6
  by JoseExposito at 2021-04-13T14:00:57+10:00

  libinput: change gesture notify cancel parameter from int to bool
  
  Change the "cancel" parameter in the existing notify methods (swipe, pinch and
  gesture_notify) from int to bool. It is used as boolean, the fact that it's an
  int is just a historical quirkyness.
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• 82da7517
  by JoseExposito at 2021-04-13T14:01:11+10:00

  gestures: rename int filter_motion to bool ignore_motion
  
  Use a bool instead of an int and also rename the variable to avoid ambiguity
  with tp_filter_motion().
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• 020f13e1
  by JoseExposito at 2021-04-13T14:01:11+10:00

  gestures: move the code to get raw pointer motion to its own function
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• 73ef2d70
  by JoseExposito at 2021-04-13T14:01:11+10:00

  gestures: move up some functions to use them later
  
  Move tp_gesture_same_directions, tp_gesture_mm_moved and tp_gesture_init_pinch
  to be able to use them in future commits.
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• 3565dafd
  by JoseExposito at 2021-04-13T14:01:11+10:00

  gestures: move the logic to detect gestures to its own function
  
  Move the code in used to detect motion based gestures (scroll, swipe and pinch)
  to tp_gesture_detect_motion_gestures.
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• 10124797
  by Peter Hutterer at 2021-04-14T15:04:39+10:00

  quirks: add palm size quirk for the Gigabyte Aero 15
  
  Fixes #599
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 144f5ed9
  by Udo Rader at 2021-04-20T02:15:03+00:00

  quirks: add quirk for Lenovo Yoga Slim 9 Touchpad
  
  This touchpad is a pressure pad and needs the pressure
  handling disabled.
  
  Fixes #604
  
  Signed-off-by: Udo Rader <udo.rader@bestsolution.at>
  

• f92a388c
  by Peter Hutterer at 2021-04-21T00:15:42+00:00

  touchpad: factor out clickpad assignment to a helper
  
  No functional changes
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 16d5d78a
  by Peter Hutterer at 2021-04-21T00:15:42+00:00

  touchpad: use some helper variables to make the code easier to read
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 467266bb
  by Peter Hutterer at 2021-04-21T00:15:42+00:00

  touchpad: a touchpad with only one button is a clickpad
  
  There is only one touchpad with a physical left button but no right button and
  that is the old Apple touchpad, discontinued in 2008. Not a huge number of
  those left, I assume.
  
  So let's change our assumptions because these days the vast majority of
  touchpads are clickpads - any touchpad that only has a left button is treated
  as clickpad, even where the kernel doesn't set the INPUT_PROP_BUTTONPAD.
  
  We do need to check for BTN_LEFT as well though, because Wacom touchpads (i.e.
  the touch part of non-integrated Wacom tablets) don't have a left button
  either.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• a37d6dcc
  by Peter Hutterer at 2021-04-21T00:15:42+00:00

  touchpad: if we have a right button, let's assume it's not a clickpad
  
  This assumption dates back roughly a decade when INPUT_PROP_BUTTONPAD was
  introduced into the kernel. To my knowledge, devices right now erroneously
  advertise INPUT_PROP_BUTTONPAD when they are not a clickpad (but then they
  have BTN_RIGHT) or they lack INPUT_PROP_BUTTONPAD (and only have BTN_LEFT).
  
  So let's change our assumption here - if a clickpad has a right button log the
  kernel bug and continue with the assumption the device is a touchpad with
  physical buttons.
  
  To disable that warning, fix the kernel or add an AttrInputPropDisable quirk
  for the device.
  
  Fixes #595
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 72f747f2
  by Peter Hutterer at 2021-04-23T01:41:12+00:00

  gitlab CI: switch to Ubuntu 21.04
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 65c27713
  by Peter Hutterer at 2021-04-29T10:30:49+10:00

  doc/user: fix a link to the system hwdb file
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 354df8bc
  by Peter Hutterer at 2021-04-29T01:31:03+00:00

  Change various references to the master branch to main
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 57811e40
  by Peter Hutterer at 2021-04-30T14:54:35+10:00

  tools/record: fix a strlen assumption
  
  We want to be able to print single-character strings.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 7da7cd21
  by Peter Hutterer at 2021-04-30T14:54:35+10:00

  tools/record: print the HID report descriptor as hex
  
  YAML does support hex as long as it's 0x-prefixed. The comment here (probably)
  dates from an in-development version of libinput-record that used JSON.
  Anyway, let's print the HID report descriptor as hex because that's the common
  format for it.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• b38c6ca6
  by Peter Hutterer at 2021-04-30T14:54:35+10:00

  tools/record: linebreak the hid report descriptor every 16 bytes
  
  New output:
  
   hid: [
      0x05, 0x0d, 0x09, 0x04, 0xa1, 0x01, 0x85, 0x01, 0x09, 0x22, 0xa1, 0x02, 0x09, 0x42, 0x15, 0x00,
      0x25, 0x01, 0x75, 0x01, 0x95, 0x01, 0x81, 0x02, 0x75, 0x01, 0x81, 0x03, 0x75, 0x06, 0x09, 0x51,
      0x25, 0x3f, 0x81, 0x02, 0x26, 0xff, 0x00, 0x75, 0x08, 0x09, 0x48, 0x81, 0x02, 0x09, 0x49, 0x81,
      ...
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• b1f958a1
  by Hans Gaiser at 2021-05-04T00:55:04+00:00

  Add quirk for Lenovo Legion 5 Pro.
  
  Signed-off-by: Hans Gaiser <hansg91@gmail.com>
  

• 20b2123f
  by Nicolas Fella at 2021-05-04T21:16:55+02:00

  doc/user: Add instructions for using with CMake
  
  CMake provides a nice way to use libinput, let the world now.
  
  Signed-off-by: Nicolas Fella <nicolas.fella@gmx.de>
  

• f1b16c18
  by Peter Hutterer at 2021-05-05T12:46:33+10:00

  meson.build: bump to 1.17.900
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• cf1abf08
  by Peter Hutterer at 2021-05-05T03:59:34+00:00

  tools/record: add support for hidraw recording
  
  New commandline switch --with-hidraw. This will open all hidraw devices
  associated with this device and add any reports to the output in the
  form:
  
    events:
      - hid:
          time: [0, 0]
          hidraw1: [0x01, 0x02, 0x03, 0x05, 0x06]
  	hidraw2: [0x07, 0x08, 0x09, 0x0a, 0x0b]
      - evdev:
        ...
  
  i.e. there's a nesting of `hid` with a list of reports, each with the hidraw
  node as dictionary entry.
  
  Because hidraw events do not have timestamps and always occur before the evdev
  events, they are in a separate frame (as shown above). We could try to figure
  out how to match them with the upcoming evdev frame but it's not worth it for
  now.
  
  The timestamp itself is a special key in the hidraw with the timestamp from
  clock_gettime.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 5a6f141b
  by Peter Hutterer at 2021-05-12T10:23:33+10:00

  gitlab CI: bump from Fedora 32 to 34
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• b1c9667a
  by Peter Hutterer at 2021-05-12T11:50:11+10:00

  editorconfig: add settings for python files
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 5dc00032
  by Peter Hutterer at 2021-05-12T13:31:42+10:00

  gitlab CI: add a JUnit XML report for scan-build
  
  Use a scan-build wrapper to generate plist files, then parse those into a
  JUnit xml format. This makes the errors appear on the main MR page as opposed
  to being hidden in the artifacts somewhere.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 4c82cbd4
  by Peter Hutterer at 2021-05-18T23:14:44+00:00

  tools/replay: do not replay key repeat events
  
  The kernel emulates key events on its own anyway, replaying key events with
  libinput replay as well just duplicates the events. Turning kernel
  repeat off is not an option, it  makes the device look different (EV_REP
  changes). So let's just not replay those events.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• e72b30f4
  by Peter Hutterer at 2021-05-18T23:14:44+00:00

  tools/record: narrow down the obfuscation range
  
  Let a few obvious modifiers through, including the F-key range. Especially
  left control is useful to know if it's down.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 3dcfae3f
  by dan g at 2021-05-19T12:59:18+10:00

  quirks: add palm rejection support for all Razer Blade models
  
  Generated with a script to scrape the openrazer project for Razer Blade
  internal keyboard VIDs, see `razer_quirk_util.py` [1]
  
  This allows us to potentially bulk-add all Razer Blade models to benefit from
  palm rejection, rather than processing individual requests and merges.
  
  [1] https://gist.github.com/danryu/ee0c24ac50af40321550462bbf9ab594
  
  Signed-off-by: dan g <dan.garton@gmail.com>
  

• 939a022c
  by novenary at 2021-05-19T05:12:58+00:00

  Improve disambiguation between two-finger pinch and scroll
  
  A pinch is defined as two fingers moving in different directions, and a
  scroll as two fingers moving in the same direction.
  
  Often enough when the user is trying to pinch, we may initially see both
  fingers moving in the same direction and decide that they want to
  scroll.
  
  Add a grace period during which we may transition to a pinch in those
  situations.
  
  Test fix: touchpad_trackpoint_buttons_2fg_scroll emits movements that
  change the distance between fingers, which triggers this new transition
  and makes the test fail; correct this.
  
  Signed-off-by: novenary <streetwalkermc@gmail.com>
  

• ca3df8a0
  by novenary at 2021-05-19T05:12:58+00:00

  Allow reviving a thumb that moves sufficiently
  
  When pinching, the thumb tends to move slower than the finger, so we may
  suppress it too early.
  
  Add a grace period during which it may be revived.
  
  Signed-off-by: novenary <streetwalkermc@gmail.com>
  

• c4ea48ed
  by novenary at 2021-05-19T05:12:58+00:00

  Increase pinch grace period to 300ms
  
  Windows allows "about a third of a second" to trigger a two-finger
  pinch.
  
  https://gitlab.freedesktop.org/libinput/libinput/-/issues/550#implementation-in-other-systems
  
  Signed-off-by: novenary <streetwalkermc@gmail.com>
  

• 0cb570ad
  by satrmb at 2021-05-19T12:24:59+02:00

  evdev: restart debouncing timers after every event
  
  Signed-off-by: satrmb <10471-satrmb@users.noreply.gitlab.freedesktop.org>
  

• cce59210
  by weizhixiang at 2021-05-24T04:11:32+00:00

  use ARRAY_FOR_EACH when traverse array
  
  Signed-off-by: weizhixiang <weizhixiang@uniontech.com>
  

• 1339dbaf
  by weizhixiang at 2021-05-24T04:42:49+00:00

  use more safety list_for_each_safe when remove element in traversing list
  
  Signed-off-by: weizhixiang <weizhixiang@uniontech.com>
  

• 624041c0
  by José Expósito at 2021-05-24T05:35:27+00:00

  test: cleanup: remove fallthrough followed by break
  
  Remove fallthrough comments followed by a break statement.
  No functional changes.
  
  Signed-off-by: José Expósito <jose.exposito89@gmail.com>
  

• d09cc9db
  by Peter Hutterer at 2021-05-25T20:19:36+10:00

  doc/user: #wayland is now on oftc
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 873a8839
  by Peter Hutterer at 2021-05-25T11:17:45+00:00

  gitlab CI: use FDO_CI_CONCURRENT in our meson build script
  
  Always prefix the ninja args with the FDO_CI_CONCURRENT values (i.e. how many
  jobs the runner tells us).
  
  Note that this variable is currently not passed through to the qemu jobs, so
  inside the VM we'll still use the ninja default values.
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 0432fe59
  by Peter Hutterer at 2021-05-26T13:17:59+10:00

  libinput 1.17.901
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• a8d450d7
  by Neev Parikh at 2021-06-01T11:04:44-04:00

  Update 50-system-asus.quirks to include Asus G15 Zephyrus quirk.
  
  Signed-off-by: Neev Parikh <neev.v.parikh@gmail.com>
  

• 2599b0d8
  by Peter Hutterer at 2021-06-02T13:06:37+10:00

  libinput 1.18.0
  
  Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
  

• 79aa29a1
  by Timo Aaltonen at 2021-06-10T11:46:45+03:00

  Merge tag '1.17.2' into d-u
  
  1.17.2
  

• 7ab02f70
  by Timo Aaltonen at 2021-06-10T11:47:02+03:00

  Merge branch 'debian-unstable' into d-u
  

• eae05eea
  by Timo Aaltonen at 2021-06-10T11:48:09+03:00

  bump the version
  

• 1080ab30
  by Timo Aaltonen at 2021-06-10T12:12:25+03:00

  release to experimental
  

12 changed files:

• + .editorconfig
• .gitlab-ci.yml
• .gitlab-ci/ci.template
• .gitlab-ci/config.yml
• .gitlab-ci/meson-build.sh
• .gitlab-ci/meson-junit-report.py
• + .gitlab-ci/scanbuild-plist-to-junit.py
• + .gitlab-ci/scanbuild-wrapper.sh
• COPYING
• README.md
• completion/zsh/_libinput
• debian/changelog

The diff was not included because it is too large.

—
View it on GitLab.
You're receiving this email because of your account on salsa.debian.org. If you'd like to receive fewer emails, you can adjust your notification settings.