--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-video-nouveau: Using the open source nouveaux driver is causing sytem to lockup hard
- From: Mar Mel <marmel6942@yahoo.com>
- Date: Sat, 22 Dec 2012 13:25:20 -0500
- Message-id: <20121222182520.8925.19781.reportbug@humonculux>
Package: xserver-xorg-video-nouveau
Version: 1:1.0.1-4
Severity: serious
Justification: 5
Dear Maintainer,
* What led up to the situation?
I performed a clean installation of Wheezy Beta 4.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I attempted to use software under gnome-shell
* What was the outcome of this action?
The system froze and locked up completely requiring REISUB as I could not
access a virtual terminal.
* What outcome did you expect instead?
The system to remain stable.
This is what I see in the syslog when the freezes occur:
Dec 10 20:10:00 humonculux kernel: [ 587.260611] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x0020026788 Put 0x002002cfb8 IbGet 0x000009b7
IbPut 0x000009b8 State 0x80004844 (err: INVALID_CMD) Push 0x00502031
Dec 10 20:10:00 humonculux kernel: [ 587.277649] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002002cff4 Put 0x002002cfb8 IbGet 0x000009b7
IbPut 0x000009b8 State 0x80004861 (err: INVALID_CMD) Push 0x00400040
Dec 10 20:10:00 humonculux kernel: [ 587.278367] [drm] nouveau 0000:01:00.0:
PGRAPH_TRAP_TPDMA_2D - TP 1 - Unknown fault at address 00208f6700
Dec 10 20:10:00 humonculux kernel: [ 587.278368] [drm] nouveau 0000:01:00.0:
PGRAPH_TRAP_TPDMA_2D - TP 1 - e0c: 00000000, e18: 00000000, e1c: 001c0000, e20:
00000037, e24: 0c030000
Dec 10 20:10:00 humonculux kernel: [ 587.278377] [drm] nouveau 0000:01:00.0:
PGRAPH - TRAP
Dec 10 20:10:00 humonculux kernel: [ 587.278378] [drm] nouveau 0000:01:00.0:
PGRAPH - ch 2 (0x0001256000) subc 2 class 0x502d mthd 0x0860 data 0x00fefefe
Dec 10 20:10:00 humonculux kernel: [ 587.278387] [drm] nouveau 0000:01:00.0:
VM: trapped write at 0x00208f6700 on ch 2 [0x00001256] PGRAPH/PROP/DST2D
reason: PAGE_NOT_PRESENT
Dec 10 20:13:21 humonculux kernel: [ 788.349804] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002002d3c4 Put 0x0020031590 IbGet 0x000006d0
IbPut 0x000006d1 State 0x80004200 (err: INVALID_CMD) Push 0x00702031
Dec 10 20:13:21 humonculux kernel: [ 788.362058] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x0020031590 Put 0x0020031590 IbGet 0x000006d0
IbPut 0x000006d1 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
Dec 10 20:15:37 humonculux kernel: [ 924.315497] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x0020028430 Put 0x0020029918 IbGet 0x00000b51
IbPut 0x00000b52 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
Dec 10 20:15:39 humonculux kernel: [ 926.250959] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002003ad7c Put 0x002003c844 IbGet 0x0000001d
IbPut 0x0000001e State 0x80000090 (err: INVALID_CMD) Push 0x00400040
Dec 10 20:20:42 humonculux kernel: [ 1229.430850] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002001d430 Put 0x002002075c IbGet 0x00000cdf
IbPut 0x00000ce0 State 0x80000054 (err: INVALID_CMD) Push 0x00400040
Dec 10 20:22:31 humonculux kernel: [ 1338.904516] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002001f7fc Put 0x0020023048 IbGet 0x00000f78
IbPut 0x00000f79 State 0x80004200 (err: INVALID_CMD) Push 0x00502031
Dec 10 20:22:31 humonculux kernel: [ 1338.916828] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x0020023048 Put 0x0020023048 IbGet 0x00000f78
IbPut 0x00000f79 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
Dec 10 20:24:06 humonculux kernel: [ 1433.720916] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002002d39c Put 0x002003177c IbGet 0x00000e83
IbPut 0x00000e84 State 0x80004200 (err: INVALID_CMD) Push 0x00500031
Dec 10 20:24:06 humonculux kernel: [ 1433.733575] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002003177c Put 0x002003177c IbGet 0x00000e83
IbPut 0x00000e84 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
Dec 10 20:24:13 humonculux kernel: [ 1440.414855] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x0020025308 Put 0x002002800c IbGet 0x00000474
IbPut 0x00000475 State 0x80004210 (err: INVALID_CMD) Push 0x00700031
Dec 10 20:24:13 humonculux kernel: [ 1440.427504] [drm] nouveau 0000:01:00.0:
PFIFO_DMA_PUSHER - Ch 2 Get 0x002002800c Put 0x002002800c IbGet 0x00000474
IbPut 0x00000475 State 0x80000000 (err: INVALID_CMD) Push 0x00400040
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 4 19:41 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2044664 Nov 29 14:34 /usr/bin/Xorg
Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT200 [GeForce GTX 260] [10de:05e2] (rev a1)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 141 Dec 10 21:25 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Video Card"
Driver "nvidia"
EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 25082 Dec 22 12:49 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 5.257]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 5.257] X Protocol Version 11, Revision 0
[ 5.257] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[ 5.257] Current Operating System: Linux humonculux 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64
[ 5.257] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=0744631c-1147-457b-896f-38b1b46127b9 ro quiet
[ 5.257] Build Date: 29 November 2012 07:18:16PM
[ 5.257] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 5.257] Current version of pixman: 0.26.0
[ 5.257] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.257] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.257] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 22 00:13:06 2012
[ 5.261] (==) Using config file: "/etc/X11/xorg.conf"
[ 5.261] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.263] (==) No Layout section. Using the first Screen section.
[ 5.263] (==) No screen section available. Using defaults.
[ 5.263] (**) |-->Screen "Default Screen Section" (0)
[ 5.263] (**) | |-->Monitor "<default monitor>"
[ 5.264] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 5.264] (**) | |-->Device "Video Card"
[ 5.264] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.264] (==) Automatically adding devices
[ 5.264] (==) Automatically enabling devices
[ 5.266] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5.266] Entry deleted from font path.
[ 5.268] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 5.268] Entry deleted from font path.
[ 5.268] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 5.268] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.268] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.268] (II) Loader magic: 0x7f0674455ae0
[ 5.268] (II) Module ABI versions:
[ 5.268] X.Org ANSI C Emulation: 0.4
[ 5.268] X.Org Video Driver: 12.1
[ 5.268] X.Org XInput driver : 16.0
[ 5.268] X.Org Server Extension : 6.0
[ 5.269] (--) PCI:*(0:1:0:0) 10de:05e2:10de:0585 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 5.269] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5.269] (II) "extmod" will be loaded by default.
[ 5.269] (II) "dbe" will be loaded by default.
[ 5.269] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 5.269] (II) "record" will be loaded by default.
[ 5.269] (II) "dri" will be loaded by default.
[ 5.269] (II) "dri2" will be loaded by default.
[ 5.269] (II) LoadModule: "glx"
[ 5.270] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 5.340] (II) Module glx: vendor="NVIDIA Corporation"
[ 5.340] compiled for 4.0.2, module version = 1.0.0
[ 5.340] Module class: X.Org Server Extension
[ 5.340] (II) NVIDIA GLX Module 304.48 Sun Sep 9 20:42:38 PDT 2012
[ 5.340] (II) Loading extension GLX
[ 5.340] (II) LoadModule: "extmod"
[ 5.346] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 5.348] (II) Module extmod: vendor="X.Org Foundation"
[ 5.348] compiled for 1.12.4, module version = 1.0.0
[ 5.348] Module class: X.Org Server Extension
[ 5.348] ABI class: X.Org Server Extension, version 6.0
[ 5.348] (II) Loading extension SELinux
[ 5.348] (II) Loading extension MIT-SCREEN-SAVER
[ 5.348] (II) Loading extension XFree86-VidModeExtension
[ 5.348] (II) Loading extension XFree86-DGA
[ 5.348] (II) Loading extension DPMS
[ 5.348] (II) Loading extension XVideo
[ 5.348] (II) Loading extension XVideo-MotionCompensation
[ 5.348] (II) Loading extension X-Resource
[ 5.348] (II) LoadModule: "dbe"
[ 5.348] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 5.350] (II) Module dbe: vendor="X.Org Foundation"
[ 5.350] compiled for 1.12.4, module version = 1.0.0
[ 5.350] Module class: X.Org Server Extension
[ 5.350] ABI class: X.Org Server Extension, version 6.0
[ 5.350] (II) Loading extension DOUBLE-BUFFER
[ 5.350] (II) LoadModule: "record"
[ 5.350] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 5.350] (II) Module record: vendor="X.Org Foundation"
[ 5.350] compiled for 1.12.4, module version = 1.13.0
[ 5.350] Module class: X.Org Server Extension
[ 5.350] ABI class: X.Org Server Extension, version 6.0
[ 5.350] (II) Loading extension RECORD
[ 5.350] (II) LoadModule: "dri"
[ 5.350] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5.352] (II) Module dri: vendor="X.Org Foundation"
[ 5.352] compiled for 1.12.4, module version = 1.0.0
[ 5.352] ABI class: X.Org Server Extension, version 6.0
[ 5.352] (II) Loading extension XFree86-DRI
[ 5.352] (II) LoadModule: "dri2"
[ 5.352] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5.352] (II) Module dri2: vendor="X.Org Foundation"
[ 5.352] compiled for 1.12.4, module version = 1.2.0
[ 5.352] ABI class: X.Org Server Extension, version 6.0
[ 5.352] (II) Loading extension DRI2
[ 5.352] (II) LoadModule: "nvidia"
[ 5.352] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.358] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.358] compiled for 4.0.2, module version = 1.0.0
[ 5.358] Module class: X.Org Video Driver
[ 5.360] (II) NVIDIA dlloader X Driver 304.48 Sun Sep 9 20:24:04 PDT 2012
[ 5.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.361] (++) using VT number 7
[ 5.419] (II) Loading sub module "fb"
[ 5.419] (II) LoadModule: "fb"
[ 5.419] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.420] (II) Module fb: vendor="X.Org Foundation"
[ 5.420] compiled for 1.12.4, module version = 1.0.0
[ 5.420] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.420] (II) Loading sub module "wfb"
[ 5.420] (II) LoadModule: "wfb"
[ 5.420] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.421] (II) Module wfb: vendor="X.Org Foundation"
[ 5.421] compiled for 1.12.4, module version = 1.0.0
[ 5.421] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.421] (II) Loading sub module "ramdac"
[ 5.421] (II) LoadModule: "ramdac"
[ 5.421] (II) Module "ramdac" already built-in
[ 5.423] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.423] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 5.423] (==) NVIDIA(0): RGB weight 888
[ 5.423] (==) NVIDIA(0): Default visual is TrueColor
[ 5.423] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.423] (**) NVIDIA(0): Enabling 2D acceleration
[ 6.700] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 6.700] (II) NVIDIA(GPU-0): stereo.
[ 6.701] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
[ 6.701] (--) NVIDIA(0): Memory: 917504 kBytes
[ 6.701] (--) NVIDIA(0): VideoBIOS: 62.00.0e.00.03
[ 6.702] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6.702] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 6.703] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 260 at PCI:1:0:0
[ 6.703] (--) NVIDIA(0): CRT-0
[ 6.703] (--) NVIDIA(0): CRT-1
[ 6.703] (--) NVIDIA(0): TV-0
[ 6.703] (--) NVIDIA(0): DFP-0
[ 6.703] (--) NVIDIA(0): DELL U2711 (DFP-1) (connected)
[ 6.703] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 6.703] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 6.703] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 6.703] (--) NVIDIA(0): TV encoder: (null)
[ 6.703] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 6.703] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 6.703] (--) NVIDIA(0): DELL U2711 (DFP-1): 330.0 MHz maximum pixel clock
[ 6.703] (--) NVIDIA(0): DELL U2711 (DFP-1): Internal Dual Link TMDS
[ 6.703] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.703] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 6.703] (**) NVIDIA(0): enabled on all display devices.)
[ 6.704] (==) NVIDIA(0):
[ 6.704] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 6.704] (==) NVIDIA(0): will be used as the requested mode.
[ 6.704] (==) NVIDIA(0):
[ 6.704] (II) NVIDIA(0): Validated MetaModes:
[ 6.704] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 6.704] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 6.726] (--) NVIDIA(0): DPI set to (108, 107); computed from "UseEdidDpi" X config
[ 6.726] (--) NVIDIA(0): option
[ 6.726] (--) Depth 24 pixmap format is 32 bpp
[ 6.726] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 6.729] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 6.756] (II) Loading extension NV-GLX
[ 6.772] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6.772] (==) NVIDIA(0): Backing store disabled
[ 6.772] (==) NVIDIA(0): Silken mouse enabled
[ 6.772] (==) NVIDIA(0): DPMS enabled
[ 6.772] (II) Loading extension NV-CONTROL
[ 6.772] (II) Loading extension XINERAMA
[ 6.772] (II) Loading sub module "dri2"
[ 6.772] (II) LoadModule: "dri2"
[ 6.774] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6.774] (II) Module dri2: vendor="X.Org Foundation"
[ 6.774] compiled for 1.12.4, module version = 1.2.0
[ 6.774] ABI class: X.Org Server Extension, version 6.0
[ 6.774] (II) NVIDIA(0): [DRI2] Setup complete
[ 6.774] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 6.774] (--) RandR disabled
[ 6.774] (II) Initializing built-in extension Generic Event Extension
[ 6.774] (II) Initializing built-in extension SHAPE
[ 6.774] (II) Initializing built-in extension MIT-SHM
[ 6.774] (II) Initializing built-in extension XInputExtension
[ 6.774] (II) Initializing built-in extension XTEST
[ 6.774] (II) Initializing built-in extension BIG-REQUESTS
[ 6.774] (II) Initializing built-in extension SYNC
[ 6.774] (II) Initializing built-in extension XKEYBOARD
[ 6.774] (II) Initializing built-in extension XC-MISC
[ 6.774] (II) Initializing built-in extension SECURITY
[ 6.774] (II) Initializing built-in extension XINERAMA
[ 6.774] (II) Initializing built-in extension XFIXES
[ 6.774] (II) Initializing built-in extension RENDER
[ 6.774] (II) Initializing built-in extension RANDR
[ 6.774] (II) Initializing built-in extension COMPOSITE
[ 6.774] (II) Initializing built-in extension DAMAGE
[ 6.774] (II) Initializing extension GLX
[ 6.774] (II) SELinux: Disabled on system
[ 6.823] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 6.823] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.823] (II) LoadModule: "evdev"
[ 6.823] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.823] (II) Module evdev: vendor="X.Org Foundation"
[ 6.823] compiled for 1.12.1, module version = 2.7.0
[ 6.823] Module class: X.Org XInput Driver
[ 6.823] ABI class: X.Org XInput driver, version 16.0
[ 6.823] (II) Using input driver 'evdev' for 'Power Button'
[ 6.823] (**) Power Button: always reports core events
[ 6.823] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 6.823] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.823] (--) evdev: Power Button: Found keys
[ 6.823] (II) evdev: Power Button: Configuring as keyboard
[ 6.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 6.823] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6.823] (**) Option "xkb_rules" "evdev"
[ 6.823] (**) Option "xkb_model" "pc105"
[ 6.823] (**) Option "xkb_layout" "us"
[ 6.824] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 6.824] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6.824] (II) Using input driver 'evdev' for 'Power Button'
[ 6.824] (**) Power Button: always reports core events
[ 6.824] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 6.824] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 6.824] (--) evdev: Power Button: Found keys
[ 6.824] (II) evdev: Power Button: Configuring as keyboard
[ 6.824] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 6.824] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 6.824] (**) Option "xkb_rules" "evdev"
[ 6.824] (**) Option "xkb_model" "pc105"
[ 6.824] (**) Option "xkb_layout" "us"
[ 6.824] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 6.824] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 6.824] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 6.824] (**) Logitech USB Receiver: always reports core events
[ 6.824] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 6.824] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 6.824] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 6.824] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 6.824] (--) evdev: Logitech USB Receiver: Found relative axes
[ 6.824] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 6.824] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 6.824] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 6.824] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 6.824] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input0/event0"
[ 6.824] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[ 6.824] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 6.824] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 6.824] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 6.824] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 6.824] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 6.824] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 6.824] (II) No input driver specified, ignoring this device.
[ 6.824] (II) This device may have been added with another device file.
[ 6.824] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 6.824] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 6.824] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 6.824] (**) Logitech USB Receiver: always reports core events
[ 6.824] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 6.824] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc531
[ 6.824] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 6.824] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 6.824] (--) evdev: Logitech USB Receiver: Found relative axes
[ 6.824] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 6.824] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 6.824] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 6.824] (--) evdev: Logitech USB Receiver: Found keys
[ 6.824] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 6.824] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 6.824] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 6.824] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 6.824] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input1/event1"
[ 6.824] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 6.824] (**) Option "xkb_rules" "evdev"
[ 6.824] (**) Option "xkb_model" "pc105"
[ 6.824] (**) Option "xkb_layout" "us"
[ 6.824] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 6.824] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 6.825] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 6.825] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 6.825] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 6.825] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 6.825] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event2)
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[ 6.825] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 6.825] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event2"
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[ 6.825] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[ 6.825] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input2/event2"
[ 6.825] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 10)
[ 6.825] (**) Option "xkb_rules" "evdev"
[ 6.825] (**) Option "xkb_model" "pc105"
[ 6.825] (**) Option "xkb_layout" "us"
[ 6.825] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event3)
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[ 6.825] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 6.825] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event3"
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found 1 mouse buttons
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found scroll wheel(s)
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found relative axes
[ 6.825] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing relative x/y axes to exist.
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found absolute axes
[ 6.825] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing absolute x/y axes to exist.
[ 6.825] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[ 6.825] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as mouse
[ 6.825] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[ 6.825] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Adding scrollwheel support
[ 6.825] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: YAxisMapping: buttons 4 and 5
[ 6.825] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6.825] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input3/event3"
[ 6.825] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 11)
[ 6.825] (**) Option "xkb_rules" "evdev"
[ 6.825] (**) Option "xkb_model" "pc105"
[ 6.825] (**) Option "xkb_layout" "us"
[ 6.825] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: initialized for relative axes.
[ 6.825] (WW) evdev: Microsoft Natural® Ergonomic Keyboard 4000: ignoring absolute axes.
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) keeping acceleration scheme 1
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration profile 0
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[ 6.825] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[ 6.825] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 6.825] (II) No input driver specified, ignoring this device.
[ 6.825] (II) This device may have been added with another device file.
[ 6.825] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 6.825] (II) No input driver specified, ignoring this device.
[ 6.825] (II) This device may have been added with another device file.
[ 6.910] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 6.910] (II) NVIDIA(GPU-0): stereo.
[ 6.910] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 6.910] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 6.910] (**) NVIDIA(0): enabled on all display devices.)
[ 7.313] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 7.313] (II) NVIDIA(GPU-0): stereo.
[ 7.313] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 7.313] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 7.313] (**) NVIDIA(0): enabled on all display devices.)
[ 17.002] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 17.002] (II) NVIDIA(GPU-0): stereo.
[ 17.002] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.002] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 17.002] (**) NVIDIA(0): enabled on all display devices.)
[ 17.304] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 17.304] (II) NVIDIA(GPU-0): stereo.
[ 17.304] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.304] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 17.304] (**) NVIDIA(0): enabled on all display devices.)
[ 17.578] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 17.578] (II) NVIDIA(GPU-0): stereo.
[ 17.578] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17.578] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 17.578] (**) NVIDIA(0): enabled on all display devices.)
[ 887.106] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 887.106] (II) NVIDIA(GPU-0): stereo.
[ 887.106] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 887.106] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 887.106] (**) NVIDIA(0): enabled on all display devices.)
[ 899.483] (II) Open ACPI successful (/var/run/acpid.socket)
[ 899.527] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 4700.563] (II) NVIDIA(GPU-0): Display (DELL U2711 (DFP-1)) does not support NVIDIA 3D Vision
[ 4700.563] (II) NVIDIA(GPU-0): stereo.
[ 4700.563] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4700.563] (**) NVIDIA(0): device DELL U2711 (DFP-1) (Using EDID frequencies has been
[ 4700.563] (**) NVIDIA(0): enabled on all display devices.)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3364573
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3384474
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3364563
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3368154
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input0
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input0
E: EV=17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c531
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_1_1_0
E: ID_REVISION=2100
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046DpC531e0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1a.0-1.1/input0"
E: PRODUCT=3/46d/c531/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=3478766
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input0/event0
N: input/event0
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-event-mouse
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input0/event0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c531
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_1_1_0
E: ID_REVISION=2100
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3480499
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input0/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input0/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c531
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_1_1_0
E: ID_REVISION=2100
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3480472
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input1
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input1
E: EV=10001f
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c531
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1:1.1
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_1_1_1
E: ID_REVISION=2100
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=4837fff072ff32d bf54444600000000 1 30f908b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
E: MODALIAS=input:b0003v046DpC531e0111-e0,1,2,3,4,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E4,E7,E8,E9,EA,EB,F0,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1a.0-1.1/input1"
E: PRODUCT=3/46d/c531/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=3477880
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input1/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Receiver-event-kbd
S: input/by-id/usb-Logitech_USB_Receiver-if01-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.1-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd /dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-kbd /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.1-event-kbd
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c531
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1:1.1
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_1_1_1
E: ID_REVISION=2100
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3479540
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input2
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input2
E: EV=120013
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Natural®_Ergonomic_Keyboard_4000
E: ID_MODEL_ENC=Natural®\x20Ergonomic\x20Keyboard\x204000
E: ID_MODEL_ID=00db
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0173
E: ID_SERIAL=Microsoft_Natural®_Ergonomic_Keyboard_4000
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
E: LED=107
E: MODALIAS=input:b0003v045Ep00DBe0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,8,sfw
E: MSC=10
E: NAME="Microsoft Natural® Ergonomic Keyboard 4000"
E: PHYS="usb-0000:00:1a.0-1.2/input0"
E: PRODUCT=3/45e/db/111
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=3476998
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input2/event2
N: input/event2
S: input/by-id/usb-Microsoft_Natural®_Ergonomic_Keyboard_4000-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Natural®_Ergonomic_Keyboard_4000-event-kbd /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.0-event-kbd
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.0/input/input2/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Natural®_Ergonomic_Keyboard_4000
E: ID_MODEL_ENC=Natural®\x20Ergonomic\x20Keyboard\x204000
E: ID_MODEL_ID=00db
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0173
E: ID_SERIAL=Microsoft_Natural®_Ergonomic_Keyboard_4000
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3479552
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input3
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input3
E: EV=10001f
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Natural®_Ergonomic_Keyboard_4000
E: ID_MODEL_ENC=Natural®\x20Ergonomic\x20Keyboard\x204000
E: ID_MODEL_ID=00db
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_1
E: ID_REVISION=0173
E: ID_SERIAL=Microsoft_Natural®_Ergonomic_Keyboard_4000
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: KEY=4837fff072ff32d bf54444600000000 1 30f908b17c007 ff7f7bfad9415fff febeffdfffefffff fffffffffffffffe
E: MODALIAS=input:b0003v045Ep00DBe0111-e0,1,2,3,4,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B3,B4,B5,B6,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E4,E7,E8,E9,EA,EB,F0,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Microsoft Natural® Ergonomic Keyboard 4000"
E: PHYS="usb-0000:00:1a.0-1.2/input1"
E: PRODUCT=3/45e/db/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=3477085
P: /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input3/event3
N: input/event3
S: input/by-id/usb-Microsoft_Natural®_Ergonomic_Keyboard_4000-event-kbd
S: input/by-id/usb-Microsoft_Natural®_Ergonomic_Keyboard_4000-if01-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.1-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Natural®_Ergonomic_Keyboard_4000-event-kbd /dev/input/by-id/usb-Microsoft_Natural®_Ergonomic_Keyboard_4000-if01-event-kbd /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.1-event-kbd
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1.2/5-1.2:1.1/input/input3/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Natural®_Ergonomic_Keyboard_4000
E: ID_MODEL_ENC=Natural®\x20Ergonomic\x20Keyboard\x204000
E: ID_MODEL_ID=00db
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_1
E: ID_REVISION=0173
E: ID_SERIAL=Microsoft_Natural®_Ergonomic_Keyboard_4000
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3479045
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: UDEV_LOG=3
E: USEC_INITIALIZED=3410799
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3412166
P: /devices/platform/pcspkr/input/input6
E: DEVPATH=/devices/platform/pcspkr/input/input6
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3365120
P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3367284
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 1.235768] Linux agpgart interface v0.103
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.13-37
ii libdrm2 2.4.33-3
ii libudev0 175-7
ii xserver-xorg-core [xorg-video-abi-12] 2:1.12.4-4
Versions of packages xserver-xorg-video-nouveau recommends:
ii libgl1-mesa-dri 8.0.5-3
xserver-xorg-video-nouveau suggests no packages.
-- no debconf information
--- End Message ---