Bug#974155: xserver-xorg-video-nouveau: [G73M] VLC 3.x locking up driver and X
Package: xserver-xorg-video-nouveau
Version: 1:1.0.16-1
Severity: important
When I run VLC 3.x (2.x was not causing this bug, as far as I remember), my desktop and keyboard input hangs up, except
cursor moving and magic SysRq combinations. Here is corresponding dmesg error messages (got via SSH, it still works):
[ 2255.336051] nouveau 0000:01:00.0: vlc[3289]: failed to idle channel 4 [vlc[3289]]
[ 2270.336054] nouveau 0000:01:00.0: vlc[3289]: failed to idle channel 4 [vlc[3289]]
[ 2285.336056] nouveau 0000:01:00.0: vlc[3289]: failed to idle channel 4 [vlc[3289]]
[ 2300.336054] nouveau 0000:01:00.0: vlc[3289]: failed to idle channel 4 [vlc[3289]]
[ 2315.336057] nouveau 0000:01:00.0: vlc[3289]: failed to idle channel 4 [vlc[3289]]
Probably some services get hanging too, I cannot properly shut down or reboot the system.
The bug is really old, I've seen it back in 2018, when VLC 3 was just released.
Now tested on freshly installed Debian "Buster"
Computer: Toshiba Qosmio F30-141 laptop
Desktop environment: XFCE 4
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G73M [GeForce Go 7600] [10de:0398] (rev a1)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.19.0-12-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.152-1 (2020-10-18)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 25949 Nov 11 01:28 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 80.990]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 80.990] Build Operating System: Linux 4.19.0-10-amd64 x86_64 Debian
[ 80.990] Current Operating System: Linux debian 4.19.0-12-amd64 #1 SMP Debian 4.19.152-1 (2020-10-18) x86_64
[ 80.990] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-12-amd64 root=UUID=0301d50d-e93d-4285-b23f-55f46d020311 ro quiet
[ 80.990] Build Date: 27 August 2020 08:51:48AM
[ 80.990] xorg-server 2:1.20.4-1+deb10u1 (https://www.debian.org/support)
[ 80.990] Current version of pixman: 0.36.0
[ 80.990] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 80.990] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 80.990] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 11 01:28:20 2020
[ 81.045] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 81.142] (==) No Layout section. Using the first Screen section.
[ 81.142] (==) No screen section available. Using defaults.
[ 81.142] (**) |-->Screen "Default Screen Section" (0)
[ 81.142] (**) | |-->Monitor "<default monitor>"
[ 81.152] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 81.152] (==) Automatically adding devices
[ 81.152] (==) Automatically enabling devices
[ 81.152] (==) Automatically adding GPU devices
[ 81.152] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 81.244] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 81.244] Entry deleted from font path.
[ 81.302] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 81.302] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 81.302] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 81.302] (II) Loader magic: 0x561bc133be20
[ 81.302] (II) Module ABI versions:
[ 81.302] X.Org ANSI C Emulation: 0.4
[ 81.302] X.Org Video Driver: 24.0
[ 81.302] X.Org XInput driver : 24.1
[ 81.302] X.Org Server Extension : 10.0
[ 81.304] (++) using VT number 7
[ 81.304] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 81.305] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 81.310] (--) PCI:*(1@0:0:0) 10de:0398:1179:0002 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072
[ 81.310] (--) PCI: (6@0:9:0) 14f1:5b7a:1179:0030 rev 0, Mem @ 0xf4000000/67108864
[ 81.310] (II) LoadModule: "glx"
[ 81.354] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 81.618] (II) Module glx: vendor="X.Org Foundation"
[ 81.618] compiled for 1.20.4, module version = 1.0.0
[ 81.618] ABI class: X.Org Server Extension, version 10.0
[ 81.758] (==) Matched nouveau as autoconfigured driver 0
[ 81.758] (==) Matched nv as autoconfigured driver 1
[ 81.758] (==) Matched modesetting as autoconfigured driver 2
[ 81.758] (==) Matched fbdev as autoconfigured driver 3
[ 81.758] (==) Matched vesa as autoconfigured driver 4
[ 81.758] (==) Assigned the driver to the xf86ConfigLayout
[ 81.758] (II) LoadModule: "nouveau"
[ 81.773] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 81.827] (II) Module nouveau: vendor="X.Org Foundation"
[ 81.827] compiled for 1.20.3, module version = 1.0.16
[ 81.827] Module class: X.Org Video Driver
[ 81.827] ABI class: X.Org Video Driver, version 24.0
[ 81.827] (II) LoadModule: "nv"
[ 81.827] (WW) Warning, couldn't open module nv
[ 81.827] (EE) Failed to load module "nv" (module does not exist, 0)
[ 81.827] (II) LoadModule: "modesetting"
[ 81.828] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 81.846] (II) Module modesetting: vendor="X.Org Foundation"
[ 81.846] compiled for 1.20.4, module version = 1.20.4
[ 81.846] Module class: X.Org Video Driver
[ 81.846] ABI class: X.Org Video Driver, version 24.0
[ 81.846] (II) LoadModule: "fbdev"
[ 81.846] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 81.869] (II) Module fbdev: vendor="X.Org Foundation"
[ 81.869] compiled for 1.20.0, module version = 0.5.0
[ 81.869] Module class: X.Org Video Driver
[ 81.869] ABI class: X.Org Video Driver, version 24.0
[ 81.869] (II) LoadModule: "vesa"
[ 81.869] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 81.886] (II) Module vesa: vendor="X.Org Foundation"
[ 81.886] compiled for 1.20.1, module version = 2.4.0
[ 81.886] Module class: X.Org Video Driver
[ 81.886] ABI class: X.Org Video Driver, version 24.0
[ 81.886] (II) NOUVEAU driver Date: Mon Jan 28 23:25:58 2019 -0500
[ 81.886] (II) NOUVEAU driver for NVIDIA chipset families :
[ 81.886] RIVA TNT (NV04)
[ 81.886] RIVA TNT2 (NV05)
[ 81.886] GeForce 256 (NV10)
[ 81.887] GeForce 2 (NV11, NV15)
[ 81.887] GeForce 4MX (NV17, NV18)
[ 81.887] GeForce 3 (NV20)
[ 81.887] GeForce 4Ti (NV25, NV28)
[ 81.887] GeForce FX (NV3x)
[ 81.887] GeForce 6 (NV4x)
[ 81.887] GeForce 7 (G7x)
[ 81.887] GeForce 8 (G8x)
[ 81.887] GeForce 9 (G9x)
[ 81.887] GeForce GTX 2xx/3xx (GT2xx)
[ 81.887] GeForce GTX 4xx/5xx (GFxxx)
[ 81.887] GeForce GTX 6xx/7xx (GKxxx)
[ 81.887] GeForce GTX 9xx (GMxxx)
[ 81.887] GeForce GTX 10xx (GPxxx)
[ 81.887] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 81.887] (II) FBDEV: driver for framebuffer: fbdev
[ 81.887] (II) VESA: driver for VESA chipsets: vesa
[ 81.890] (II) [drm] nouveau interface version: 1.3.1
[ 81.890] (WW) Falling back to old probe method for modesetting
[ 81.890] (WW) Falling back to old probe method for fbdev
[ 81.891] (II) Loading sub module "fbdevhw"
[ 81.891] (II) LoadModule: "fbdevhw"
[ 81.891] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 81.926] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 81.926] compiled for 1.20.4, module version = 0.0.2
[ 81.926] ABI class: X.Org Video Driver, version 24.0
[ 81.926] (II) Loading sub module "dri2"
[ 81.926] (II) LoadModule: "dri2"
[ 81.926] (II) Module "dri2" already built-in
[ 81.926] (--) NOUVEAU(0): Chipset: "NVIDIA NV4B"
[ 81.926] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 81.926] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 81.926] (==) NOUVEAU(0): RGB weight 888
[ 81.926] (==) NOUVEAU(0): Default visual is TrueColor
[ 81.926] (==) NOUVEAU(0): Using HW cursor
[ 81.926] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 81.926] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 81.926] (==) NOUVEAU(0): Page flipping enabled
[ 81.926] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 81.926] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 81.926] (II) NOUVEAU(0): Initializing outputs ...
[ 81.951] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 81.990] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 81.991] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 82.030] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 82.030] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 82.030] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 82.030] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 82.030] (II) NOUVEAU(0): EDID for output LVDS-1
[ 82.030] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 82.030] (II) NOUVEAU(0): Modeline "1280x800"x60.0 68.90 1280 1302 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 82.030] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 82.030] (II) NOUVEAU(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 82.030] (II) NOUVEAU(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz)
[ 82.030] (II) NOUVEAU(0): Modeline "720x400"x60.0 22.41 720 744 808 896 400 403 413 417 -hsync +vsync (25.0 kHz)
[ 82.030] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 82.030] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.52 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 82.070] (II) NOUVEAU(0): EDID for output VGA-1
[ 82.071] (II) NOUVEAU(0): EDID for output HDMI-1
[ 82.110] (II) NOUVEAU(0): EDID for output TV-1
[ 82.110] (II) NOUVEAU(0): Output LVDS-1 connected
[ 82.110] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 82.110] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 82.110] (II) NOUVEAU(0): Output TV-1 disconnected
[ 82.110] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 82.110] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1280x800 +0+0
[ 82.110] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 82.110] (II) NOUVEAU(0): Virtual size is 1280x800 (pitch 0)
[ 82.110] (**) NOUVEAU(0): Driver mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
[ 82.110] (II) NOUVEAU(0): Modeline "1280x800"x60.0 68.90 1280 1302 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 82.110] (**) NOUVEAU(0): Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 82.110] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.53 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 82.110] (**) NOUVEAU(0): Mode "800x600": 38.3 MHz (scaled from 0.0 MHz), 37.4 kHz, 60.0 Hz
[ 82.110] (II) NOUVEAU(0): Modeline "800x600"x60.0 38.31 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 82.110] (**) NOUVEAU(0): Mode "640x480": 24.0 MHz (scaled from 0.0 MHz), 30.0 kHz, 59.9 Hz
[ 82.110] (II) NOUVEAU(0): Modeline "640x480"x59.9 23.98 640 664 720 800 480 483 487 500 -hsync +vsync (30.0 kHz)
[ 82.110] (**) NOUVEAU(0): Mode "720x400": 22.4 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 82.110] (II) NOUVEAU(0): Modeline "720x400"x60.0 22.41 720 744 808 896 400 403 413 417 -hsync +vsync (25.0 kHz)
[ 82.110] (**) NOUVEAU(0): Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 82.110] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 82.110] (**) NOUVEAU(0): Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 82.110] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.52 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 82.110] (==) NOUVEAU(0): DPI set to (96, 96)
[ 82.110] (II) Loading sub module "fb"
[ 82.110] (II) LoadModule: "fb"
[ 82.110] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 82.131] (II) Module fb: vendor="X.Org Foundation"
[ 82.131] compiled for 1.20.4, module version = 1.0.0
[ 82.131] ABI class: X.Org ANSI C Emulation, version 0.4
[ 82.131] (II) Loading sub module "shadowfb"
[ 82.131] (II) LoadModule: "shadowfb"
[ 82.131] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 82.145] (II) Module shadowfb: vendor="X.Org Foundation"
[ 82.145] compiled for 1.20.4, module version = 1.0.0
[ 82.145] ABI class: X.Org ANSI C Emulation, version 0.4
[ 82.145] (II) UnloadModule: "modesetting"
[ 82.145] (II) Unloading modesetting
[ 82.145] (II) UnloadModule: "fbdev"
[ 82.145] (II) Unloading fbdev
[ 82.145] (II) UnloadSubModule: "fbdevhw"
[ 82.145] (II) Unloading fbdevhw
[ 82.145] (II) UnloadModule: "vesa"
[ 82.145] (II) Unloading vesa
[ 82.147] (II) NOUVEAU(0): Channel setup complete.
[ 82.187] (II) NOUVEAU(0): Hardware support for Present enabled
[ 82.187] (II) NOUVEAU(0): [DRI2] Setup complete
[ 82.187] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 82.187] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 82.187] (II) Loading sub module "exa"
[ 82.187] (II) LoadModule: "exa"
[ 82.187] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 82.203] (II) Module exa: vendor="X.Org Foundation"
[ 82.203] compiled for 1.20.4, module version = 2.6.0
[ 82.203] ABI class: X.Org Video Driver, version 24.0
[ 82.204] (II) EXA(0): Driver allocated offscreen pixmaps
[ 82.204] (II) EXA(0): Driver registered support for the following operations:
[ 82.204] (II) Solid
[ 82.204] (II) Copy
[ 82.204] (II) Composite (RENDER acceleration)
[ 82.204] (II) UploadToScreen
[ 82.204] (II) DownloadFromScreen
[ 82.204] (==) NOUVEAU(0): Backing store enabled
[ 82.204] (==) NOUVEAU(0): Silken mouse enabled
[ 82.204] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 82.204] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 82.204] (==) NOUVEAU(0): DPMS enabled
[ 82.212] (II) Initializing extension Generic Event Extension
[ 82.213] (II) Initializing extension SHAPE
[ 82.213] (II) Initializing extension MIT-SHM
[ 82.213] (II) Initializing extension XInputExtension
[ 82.220] (II) Initializing extension XTEST
[ 82.220] (II) Initializing extension BIG-REQUESTS
[ 82.220] (II) Initializing extension SYNC
[ 82.220] (II) Initializing extension XKEYBOARD
[ 82.220] (II) Initializing extension XC-MISC
[ 82.221] (II) Initializing extension SECURITY
[ 82.221] (II) Initializing extension XFIXES
[ 82.221] (II) Initializing extension RENDER
[ 82.221] (II) Initializing extension RANDR
[ 82.222] (II) Initializing extension COMPOSITE
[ 82.222] (II) Initializing extension DAMAGE
[ 82.222] (II) Initializing extension MIT-SCREEN-SAVER
[ 82.222] (II) Initializing extension DOUBLE-BUFFER
[ 82.222] (II) Initializing extension RECORD
[ 82.223] (II) Initializing extension DPMS
[ 82.223] (II) Initializing extension Present
[ 82.223] (II) Initializing extension DRI3
[ 82.223] (II) Initializing extension X-Resource
[ 82.223] (II) Initializing extension XVideo
[ 82.223] (II) Initializing extension XVideo-MotionCompensation
[ 82.223] (II) Initializing extension SELinux
[ 82.223] (II) SELinux: Disabled on system
[ 82.223] (II) Initializing extension GLX
[ 88.642] (II) AIGLX: Loaded and initialized nouveau
[ 88.642] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 88.642] (II) Initializing extension XFree86-VidModeExtension
[ 88.642] (II) Initializing extension XFree86-DGA
[ 88.643] (II) Initializing extension XFree86-DRI
[ 88.643] (II) Initializing extension DRI2
[ 88.645] (II) NOUVEAU(0): NVEnterVT is called.
[ 88.645] (II) NOUVEAU(0): Setting screen physical size to 338 x 211
[ 88.646] resize called 1280 800
[ 89.321] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 89.321] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 89.321] (II) LoadModule: "libinput"
[ 89.321] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 89.423] (II) Module libinput: vendor="X.Org Foundation"
[ 89.424] compiled for 1.20.4, module version = 0.28.2
[ 89.424] Module class: X.Org XInput Driver
[ 89.424] ABI class: X.Org XInput driver, version 24.1
[ 89.424] (II) Using input driver 'libinput' for 'Power Button'
[ 89.424] (**) Power Button: always reports core events
[ 89.424] (**) Option "Device" "/dev/input/event3"
[ 89.442] (**) Option "_source" "server/udev"
[ 89.561] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 89.561] (II) event3 - Power Button: device is a keyboard
[ 89.561] (II) event3 - Power Button: device removed
[ 89.578] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 89.578] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 89.578] (**) Option "xkb_model" "pc105"
[ 89.578] (**) Option "xkb_layout" "us,ru"
[ 89.578] (**) Option "xkb_variant" ","
[ 89.578] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 89.677] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 89.677] (II) event3 - Power Button: device is a keyboard
[ 89.678] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 89.678] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 89.678] (II) Using input driver 'libinput' for 'Video Bus'
[ 89.678] (**) Video Bus: always reports core events
[ 89.678] (**) Option "Device" "/dev/input/event4"
[ 89.678] (**) Option "_source" "server/udev"
[ 89.679] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 89.679] (II) event4 - Video Bus: device is a keyboard
[ 89.679] (II) event4 - Video Bus: device removed
[ 89.714] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5/event4"
[ 89.714] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 89.714] (**) Option "xkb_model" "pc105"
[ 89.714] (**) Option "xkb_layout" "us,ru"
[ 89.714] (**) Option "xkb_variant" ","
[ 89.714] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 89.718] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 89.718] (II) event4 - Video Bus: device is a keyboard
[ 89.719] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 89.719] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 89.719] (II) Using input driver 'libinput' for 'Power Button'
[ 89.719] (**) Power Button: always reports core events
[ 89.719] (**) Option "Device" "/dev/input/event2"
[ 89.719] (**) Option "_source" "server/udev"
[ 89.721] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 89.721] (II) event2 - Power Button: device is a keyboard
[ 89.721] (II) event2 - Power Button: device removed
[ 89.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 89.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 89.730] (**) Option "xkb_model" "pc105"
[ 89.730] (**) Option "xkb_layout" "us,ru"
[ 89.730] (**) Option "xkb_variant" ","
[ 89.730] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 89.732] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 89.732] (II) event2 - Power Button: device is a keyboard
[ 89.733] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 89.733] (II) No input driver specified, ignoring this device.
[ 89.733] (II) This device may have been added with another device file.
[ 89.736] (II) config/udev: Adding input device Acer Crystal Eye webcam: Acer C (/dev/input/event8)
[ 89.736] (**) Acer Crystal Eye webcam: Acer C: Applying InputClass "libinput keyboard catchall"
[ 89.736] (II) Using input driver 'libinput' for 'Acer Crystal Eye webcam: Acer C'
[ 89.736] (**) Acer Crystal Eye webcam: Acer C: always reports core events
[ 89.736] (**) Option "Device" "/dev/input/event8"
[ 89.736] (**) Option "_source" "server/udev"
[ 89.739] (II) event8 - Acer Crystal Eye webcam: Acer C: is tagged by udev as: Keyboard
[ 89.739] (II) event8 - Acer Crystal Eye webcam: Acer C: device is a keyboard
[ 89.739] (II) event8 - Acer Crystal Eye webcam: Acer C: device removed
[ 89.774] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9/event8"
[ 89.774] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam: Acer C" (type: KEYBOARD, id 9)
[ 89.774] (**) Option "xkb_model" "pc105"
[ 89.774] (**) Option "xkb_layout" "us,ru"
[ 89.774] (**) Option "xkb_variant" ","
[ 89.774] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 89.778] (II) event8 - Acer Crystal Eye webcam: Acer C: is tagged by udev as: Keyboard
[ 89.778] (II) event8 - Acer Crystal Eye webcam: Acer C: device is a keyboard
[ 89.779] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 89.779] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 89.779] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 89.779] (**) AT Translated Set 2 keyboard: always reports core events
[ 89.779] (**) Option "Device" "/dev/input/event0"
[ 89.779] (**) Option "_source" "server/udev"
[ 89.782] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 89.782] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 89.783] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 89.802] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 89.802] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 89.802] (**) Option "xkb_model" "pc105"
[ 89.802] (**) Option "xkb_layout" "us,ru"
[ 89.802] (**) Option "xkb_variant" ","
[ 89.802] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 89.805] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 89.805] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 89.808] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 89.808] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 89.808] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 89.808] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 89.808] (II) LoadModule: "synaptics"
[ 89.808] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 89.833] (II) Module synaptics: vendor="X.Org Foundation"
[ 89.833] compiled for 1.20.1, module version = 1.9.1
[ 89.833] Module class: X.Org XInput Driver
[ 89.833] ABI class: X.Org XInput driver, version 24.1
[ 89.833] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 89.833] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 89.833] (**) Option "Device" "/dev/input/event5"
[ 89.862] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 0)
[ 89.862] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 0)
[ 89.862] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 89.862] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 89.862] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 89.862] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 89.862] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 89.862] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 89.902] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 89.902] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 89.902] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 89.902] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 89.902] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 89.902] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 89.902] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 89.902] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 89.902] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 89.903] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 89.904] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 89.904] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 89.905] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 89.905] (II) No input driver specified, ignoring this device.
[ 89.905] (II) This device may have been added with another device file.
[ 89.907] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7)
[ 89.907] (**) Toshiba input device: Applying InputClass "libinput keyboard catchall"
[ 89.907] (II) Using input driver 'libinput' for 'Toshiba input device'
[ 89.907] (**) Toshiba input device: always reports core events
[ 89.907] (**) Option "Device" "/dev/input/event7"
[ 89.907] (**) Option "_source" "server/udev"
[ 89.909] (II) event7 - Toshiba input device: is tagged by udev as: Keyboard
[ 89.909] (II) event7 - Toshiba input device: device is a keyboard
[ 89.909] (II) event7 - Toshiba input device: device removed
[ 89.930] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[ 89.930] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 12)
[ 89.930] (**) Option "xkb_model" "pc105"
[ 89.930] (**) Option "xkb_layout" "us,ru"
[ 89.930] (**) Option "xkb_variant" ","
[ 89.930] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 89.932] (II) event7 - Toshiba input device: is tagged by udev as: Keyboard
[ 89.932] (II) event7 - Toshiba input device: device is a keyboard
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PROP=0
E: EV=3
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=1832409
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
N: input/event3
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: MAJOR=13
E: MINOR=67
E: USEC_INITIALIZED=31974479
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us,ru
E: XKBVARIANT=,
E: XKBOPTIONS=grp:ctrl_shift_toggle,grp_led:scroll
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5
E: SUBSYSTEM=input
E: PRODUCT=19/0/6/0
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PROP=0
E: EV=3
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: USEC_INITIALIZED=1892996
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5/event4
N: input/event4
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input5/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: MAJOR=13
E: MINOR=68
E: USEC_INITIALIZED=31972304
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us,ru
E: XKBVARIANT=,
E: XKBOPTIONS=grp:ctrl_shift_toggle,grp_led:scroll
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PROP=0
E: EV=3
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=1812784
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2
N: input/event2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: MAJOR=13
E: MINOR=66
E: USEC_INITIALIZED=31972776
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us,ru
E: XKBVARIANT=,
E: XKBOPTIONS=grp:ctrl_shift_toggle,grp_led:scroll
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: SUBSYSTEM=input
E: PRODUCT=19/0/5/0
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PROP=0
E: EV=21
E: SW=1
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: USEC_INITIALIZED=1810665
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
N: input/event1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: MAJOR=13
E: MINOR=65
E: USEC_INITIALIZED=31974110
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5:PNP0C0D/button
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9
E: SUBSYSTEM=input
E: PRODUCT=3/5986/105/7
E: NAME="Acer Crystal Eye webcam: Acer C"
E: PHYS="usb-0000:00:1d.7-3/button"
E: PROP=0
E: EV=3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v5986p0105e0007-e0,1,kD4,ramlsfw
E: USEC_INITIALIZED=34197852
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=USB_Audio_Device
E: ID_VENDOR_ENC=USB\x20Audio\x20Device
E: ID_VENDOR_ID=5986
E: ID_MODEL=Acer_Crystal_Eye_webcam
E: ID_MODEL_ENC=Acer\x20Crystal\x20Eye\x20webcam
E: ID_MODEL_ID=0105
E: ID_REVISION=0007
E: ID_SERIAL=USB_Audio_Device_Acer_Crystal_Eye_webcam
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_3_1_0
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_3_1_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9/event8
N: input/event8
L: 0
S: input/by-id/usb-USB_Audio_Device_Acer_Crystal_Eye_webcam-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:3:1.0-event
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9/event8
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: MAJOR=13
E: MINOR=72
E: USEC_INITIALIZED=34241084
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=USB_Audio_Device
E: ID_VENDOR_ENC=USB\x20Audio\x20Device
E: ID_VENDOR_ID=5986
E: ID_MODEL=Acer_Crystal_Eye_webcam
E: ID_MODEL_ENC=Acer\x20Crystal\x20Eye\x20webcam
E: ID_MODEL_ID=0105
E: ID_REVISION=0007
E: ID_SERIAL=USB_Audio_Device_Acer_Crystal_Eye_webcam
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_3_1_0
E: XKBMODEL=pc105
E: XKBLAYOUT=us,ru
E: XKBVARIANT=,
E: XKBOPTIONS=grp:ctrl_shift_toggle,grp_led:scroll
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/5986/105:usb-0000:00:1d.7-3/button
E: DEVLINKS=/dev/input/by-id/usb-USB_Audio_Device_Acer_Crystal_Eye_webcam-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:3:1.0-event
E: TAGS=:power-switch:
P: /devices/platform/i8042/serio0/input/input0
L: 0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: SUBSYSTEM=input
E: PRODUCT=11/1/1/ab41
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PROP=0
E: EV=120013
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: MSC=10
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: USEC_INITIALIZED=1812046
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: TAGS=:seat:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
L: 0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: MAJOR=13
E: MINOR=64
E: USEC_INITIALIZED=31972986
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=us,ru
E: XKBVARIANT=,
E: XKBOPTIONS=grp:ctrl_shift_toggle,grp_led:scroll
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: TAGS=:power-switch:
P: /devices/platform/i8042/serio1/input/input6
L: 0
E: DEVPATH=/devices/platform/i8042/serio1/input/input6
E: SUBSYSTEM=input
E: PRODUCT=11/2/7/25b1
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PROP=1
E: EV=b
E: KEY=6420 30000 0 0 0 0
E: ABS=11000003
E: MODALIAS=input:b0011v0002p0007e25B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw
E: USEC_INITIALIZED=3112770
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: TAGS=:seat:
P: /devices/platform/i8042/serio1/input/input6/event5
N: input/event5
L: 0
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event5
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: MAJOR=13
E: MINOR=69
E: USEC_INITIALIZED=32438602
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=11/2/7:isa0060/serio1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input6/mouse0
N: input/mouse0
L: 0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: MAJOR=13
E: MINOR=32
E: USEC_INITIALIZED=27210714
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/pcspkr/input/input7
L: 0
E: DEVPATH=/devices/platform/pcspkr/input/input7
E: SUBSYSTEM=input
E: PRODUCT=10/1f/1/100
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PROP=0
E: EV=40001
E: SND=6
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: USEC_INITIALIZED=27411176
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_FOR_SEAT=input-platform-pcspkr
E: TAGS=:seat:
P: /devices/platform/pcspkr/input/input7/event6
N: input/event6
L: 0
S: input/by-path/platform-pcspkr-event-spkr
E: DEVPATH=/devices/platform/pcspkr/input/input7/event6
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: MAJOR=13
E: MINOR=70
E: USEC_INITIALIZED=31973601
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input8
L: 0
E: DEVPATH=/devices/virtual/input/input8
E: SUBSYSTEM=input
E: PRODUCT=19/0/0/0
E: NAME="Toshiba input device"
E: PHYS="toshiba_acpi/input0"
E: PROP=0
E: EV=13
E: KEY=40000 10000 1c00000000 0 0 81501f00002000 3809604001 2000000000000 8000
E: MSC=10
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k71,80,8E,95,96,98,9B,A3,A4,A5,CD,E0,E1,E2,E3,E4,EC,EE,F0,F7,1A2,1A3,1A4,1D0,212,ram4,lsfw
E: USEC_INITIALIZED=30104945
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: TAGS=:seat:
P: /devices/virtual/input/input8/event7
N: input/event7
L: 0
E: DEVPATH=/devices/virtual/input/input8/event7
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: MAJOR=13
E: MINOR=71
E: USEC_INITIALIZED=31973926
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us,ru
E: XKBVARIANT=,
E: XKBOPTIONS=grp:ctrl_shift_toggle,grp_led:scroll
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/0:toshiba_acpi
E: TAGS=:power-switch:
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 10.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-12-amd64 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.28-10
ii libdrm-nouveau2 2.4.97-1
ii libdrm2 2.4.97-1
ii libudev1 241-7~deb10u4
ii xserver-xorg-core [xorg-video-abi-24] 2:1.20.4-1+deb10u1
Versions of packages xserver-xorg-video-nouveau recommends:
ii libgl1-mesa-dri 18.3.6-2+deb10u1
Versions of packages xserver-xorg-video-nouveau suggests:
pn firmware-misc-nonfree <none>
-- no debconf information
Reply to: