Bug#949980: libgl1-mesa-dri: SIGSEGV in rockchip_dri.so when running Gnome/GTK
Package: libgl1-mesa-dri
Followup-For: Bug #949980
This bug is still present with the libgl1-mesa-dri in unstable
(currently 19.3.3-1), but upgrading the following set of packages
to the version in experimental (currently 20.0.0-1) fixes it for me:
libegl-mesa0
libgbm1
libgl1-mesa-dri
libglapi-mesa
libglx-mesa0
mesa-va-drivers
mesa-vdpau-drivers
mesa-vulkan-drivers
-- Package-specific info:
glxinfo:
--------
glxinfo is not available (missing mesa-utils package).
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
The lspci command was not found; not including PCI data.
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 0
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 5.5.0-1-pinebookpro-arm64 (abuild@obs-arm-9) (gcc version 9.2.1 20200224 (Debian 9.2.1-30)) #1 SMP PREEMPT Sun Mar 1 05:19:55 UTC 2020
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 36000 Mar 4 15:44 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 12.158]
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[ 12.158] Build Operating System: Linux 4.19.0-6-arm64 aarch64 Debian
[ 12.158] Current Operating System: Linux torrey 5.5.0-1-pinebookpro-arm64 #1 SMP PREEMPT Sun Mar 1 05:19:55 UTC 2020 aarch64
[ 12.158] Kernel command line: root=PARTLABEL=mmcblk0-RootFS console=ttyS2,1500000n8 console=tty0 ro quiet splash plymouth.ignore-serial-consoles maxcpus=4 coherent_pool=1M earlycon=uart8250,mmio32,0xff1a0000 mem_sleep_default=s2idle
[ 12.158] Build Date: 05 February 2020 04:27:36PM
[ 12.158] xorg-server 2:1.20.7-3 (https://www.debian.org/support)
[ 12.158] Current version of pixman: 0.36.0
[ 12.158] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.158] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.159] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 4 14:02:25 2020
[ 12.171] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.174] (==) No Layout section. Using the first Screen section.
[ 12.175] (==) No screen section available. Using defaults.
[ 12.175] (**) |-->Screen "Default Screen Section" (0)
[ 12.175] (**) | |-->Monitor "<default monitor>"
[ 12.176] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.176] (==) Automatically adding devices
[ 12.177] (==) Automatically enabling devices
[ 12.177] (==) Automatically adding GPU devices
[ 12.177] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 12.182] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 12.183] Entry deleted from font path.
[ 12.189] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 12.189] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.189] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.189] (II) Loader magic: 0xaaaabb81ce10
[ 12.189] (II) Module ABI versions:
[ 12.189] X.Org ANSI C Emulation: 0.4
[ 12.189] X.Org Video Driver: 24.1
[ 12.189] X.Org XInput driver : 24.1
[ 12.189] X.Org Server Extension : 10.0
[ 12.194] (++) using VT number 7
[ 12.194] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 12.199] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.207] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 12.207] (II) no primary bus or device found
[ 12.207] falling back to /sys/devices/platform/display-subsystem/drm/card0
[ 12.207] (II) LoadModule: "glx"
[ 12.211] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.257] (II) Module glx: vendor="X.Org Foundation"
[ 12.257] compiled for 1.20.7, module version = 1.0.0
[ 12.257] ABI class: X.Org Server Extension, version 10.0
[ 12.258] (==) Matched modesetting as autoconfigured driver 0
[ 12.258] (==) Matched fbdev as autoconfigured driver 1
[ 12.258] (==) Assigned the driver to the xf86ConfigLayout
[ 12.258] (II) LoadModule: "modesetting"
[ 12.259] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 12.264] (II) Module modesetting: vendor="X.Org Foundation"
[ 12.264] compiled for 1.20.7, module version = 1.20.7
[ 12.264] Module class: X.Org Video Driver
[ 12.264] ABI class: X.Org Video Driver, version 24.1
[ 12.264] (II) LoadModule: "fbdev"
[ 12.265] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 12.267] (II) Module fbdev: vendor="X.Org Foundation"
[ 12.267] compiled for 1.20.0, module version = 0.5.0
[ 12.267] Module class: X.Org Video Driver
[ 12.267] ABI class: X.Org Video Driver, version 24.0
[ 12.267] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12.267] (II) FBDEV: driver for framebuffer: fbdev
[ 12.323] (II) modeset(0): using drv /dev/dri/card0
[ 12.323] (WW) Falling back to old probe method for fbdev
[ 12.323] (II) Loading sub module "fbdevhw"
[ 12.323] (II) LoadModule: "fbdevhw"
[ 12.324] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 12.327] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12.327] compiled for 1.20.7, module version = 0.0.2
[ 12.327] ABI class: X.Org Video Driver, version 24.1
[ 12.328] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.328] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 12.328] (==) modeset(0): RGB weight 888
[ 12.328] (==) modeset(0): Default visual is TrueColor
[ 12.328] (II) Loading sub module "glamoregl"
[ 12.328] (II) LoadModule: "glamoregl"
[ 12.329] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 12.372] (II) Module glamoregl: vendor="X.Org Foundation"
[ 12.372] compiled for 1.20.7, module version = 1.0.1
[ 12.372] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.108] (II) modeset(0): glamor X acceleration enabled on Mali T860 (Panfrost)
[ 14.108] (II) modeset(0): glamor initialized
[ 14.109] (II) modeset(0): Output eDP-1 has no monitor section
[ 14.109] (II) modeset(0): Output DP-1 has no monitor section
[ 14.109] (II) modeset(0): EDID for output eDP-1
[ 14.110] (II) modeset(0): Printing probed modes for output eDP-1
[ 14.110] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 1968 2000 2200 1080 1083 1088 1125 (67.5 kHz eP)
[ 14.110] (II) modeset(0): EDID for output DP-1
[ 14.110] (II) modeset(0): Output eDP-1 connected
[ 14.110] (II) modeset(0): Output DP-1 disconnected
[ 14.110] (II) modeset(0): Using exact sizes for initial modes
[ 14.110] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 14.110] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.110] (==) modeset(0): DPI set to (96, 96)
[ 14.110] (II) Loading sub module "fb"
[ 14.110] (II) LoadModule: "fb"
[ 14.111] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.130] (II) Module fb: vendor="X.Org Foundation"
[ 14.130] compiled for 1.20.7, module version = 1.0.0
[ 14.130] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.130] (II) UnloadModule: "fbdev"
[ 14.130] (II) Unloading fbdev
[ 14.130] (II) UnloadSubModule: "fbdevhw"
[ 14.130] (II) Unloading fbdevhw
[ 14.383] (==) modeset(0): Backing store enabled
[ 14.383] (==) modeset(0): Silken mouse enabled
[ 14.390] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 14.391] (==) modeset(0): DPMS enabled
[ 14.392] (II) modeset(0): [DRI2] Setup complete
[ 14.392] (II) modeset(0): [DRI2] DRI driver: rockchip
[ 14.392] (II) modeset(0): [DRI2] VDPAU driver: rockchip
[ 14.392] (II) Initializing extension Generic Event Extension
[ 14.392] (II) Initializing extension SHAPE
[ 14.393] (II) Initializing extension MIT-SHM
[ 14.393] (II) Initializing extension XInputExtension
[ 14.395] (II) Initializing extension XTEST
[ 14.395] (II) Initializing extension BIG-REQUESTS
[ 14.395] (II) Initializing extension SYNC
[ 14.396] (II) Initializing extension XKEYBOARD
[ 14.396] (II) Initializing extension XC-MISC
[ 14.396] (II) Initializing extension SECURITY
[ 14.397] (II) Initializing extension XFIXES
[ 14.397] (II) Initializing extension RENDER
[ 14.397] (II) Initializing extension RANDR
[ 14.398] (II) Initializing extension COMPOSITE
[ 14.398] (II) Initializing extension DAMAGE
[ 14.398] (II) Initializing extension MIT-SCREEN-SAVER
[ 14.399] (II) Initializing extension DOUBLE-BUFFER
[ 14.399] (II) Initializing extension RECORD
[ 14.399] (II) Initializing extension DPMS
[ 14.399] (II) Initializing extension Present
[ 14.400] (II) Initializing extension DRI3
[ 14.400] (II) Initializing extension X-Resource
[ 14.400] (II) Initializing extension XVideo
[ 14.401] (II) Initializing extension XVideo-MotionCompensation
[ 14.401] (II) Initializing extension SELinux
[ 14.401] (II) SELinux: Disabled on system
[ 14.401] (II) Initializing extension GLX
[ 14.644] (II) AIGLX: Loaded and initialized rockchip
[ 14.644] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.644] (II) Initializing extension XFree86-VidModeExtension
[ 14.645] (II) Initializing extension XFree86-DGA
[ 14.646] (II) Initializing extension XFree86-DRI
[ 14.648] (II) Initializing extension DRI2
[ 14.658] (II) modeset(0): Damage tracking initialized
[ 14.658] (II) modeset(0): Setting screen physical size to 508 x 285
[ 14.929] (II) config/udev: Adding input device rockchip,es8316-codec Headphones (/dev/input/event12)
[ 14.929] (II) No input driver specified, ignoring this device.
[ 14.929] (II) This device may have been added with another device file.
[ 14.931] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD (/dev/input/event1)
[ 14.931] (**) HAILUCK CO.,LTD USB KEYBOARD: Applying InputClass "libinput keyboard catchall"
[ 14.931] (II) LoadModule: "libinput"
[ 14.932] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 14.950] (II) Module libinput: vendor="X.Org Foundation"
[ 14.950] compiled for 1.20.4, module version = 0.29.0
[ 14.950] Module class: X.Org XInput Driver
[ 14.951] ABI class: X.Org XInput driver, version 24.1
[ 14.951] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD'
[ 14.951] (**) HAILUCK CO.,LTD USB KEYBOARD: always reports core events
[ 14.951] (**) Option "Device" "/dev/input/event1"
[ 14.953] (**) Option "_source" "server/udev"
[ 14.981] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: is tagged by udev as: Keyboard
[ 14.982] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device is a keyboard
[ 14.983] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device removed
[ 15.020] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1/event1"
[ 15.020] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD" (type: KEYBOARD, id 6)
[ 15.021] (**) Option "xkb_model" "pc104"
[ 15.021] (**) Option "xkb_layout" "us"
[ 15.021] (**) Option "xkb_options" "lv3:ralt_switch"
[ 15.078] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: is tagged by udev as: Keyboard
[ 15.078] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device is a keyboard
[ 15.079] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Mouse (/dev/input/event7)
[ 15.079] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: Applying InputClass "libinput pointer catchall"
[ 15.079] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Mouse'
[ 15.079] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: always reports core events
[ 15.079] (**) Option "Device" "/dev/input/event7"
[ 15.080] (**) Option "_source" "server/udev"
[ 15.082] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: is tagged by udev as: Mouse
[ 15.082] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device is a pointer
[ 15.083] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device removed
[ 15.221] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/event7"
[ 15.221] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Mouse" (type: MOUSE, id 7)
[ 15.223] (**) Option "AccelerationScheme" "none"
[ 15.223] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: (accel) selected scheme none/0
[ 15.223] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: (accel) acceleration factor: 2.000
[ 15.223] (**) HAILUCK CO.,LTD USB KEYBOARD Mouse: (accel) acceleration threshold: 4
[ 15.234] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: is tagged by udev as: Mouse
[ 15.235] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device is a pointer
[ 15.239] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Mouse (/dev/input/mouse1)
[ 15.240] (II) No input driver specified, ignoring this device.
[ 15.240] (II) This device may have been added with another device file.
[ 15.243] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Touchpad (/dev/input/event8)
[ 15.244] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: Applying InputClass "libinput touchpad catchall"
[ 15.244] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Touchpad'
[ 15.244] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: always reports core events
[ 15.244] (**) Option "Device" "/dev/input/event8"
[ 15.244] (**) Option "_source" "server/udev"
[ 15.251] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: is tagged by udev as: Touchpad
[ 15.254] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device is a touchpad
[ 15.254] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device removed
[ 15.342] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/event8"
[ 15.342] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Touchpad" (type: TOUCHPAD, id 8)
[ 15.353] (**) Option "AccelerationScheme" "none"
[ 15.353] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: (accel) selected scheme none/0
[ 15.353] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: (accel) acceleration factor: 2.000
[ 15.354] (**) HAILUCK CO.,LTD USB KEYBOARD Touchpad: (accel) acceleration threshold: 4
[ 15.363] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: is tagged by udev as: Touchpad
[ 15.366] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device is a touchpad
[ 15.369] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Touchpad (/dev/input/mouse2)
[ 15.369] (II) No input driver specified, ignoring this device.
[ 15.369] (II) This device may have been added with another device file.
[ 15.371] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD System Control (/dev/input/event9)
[ 15.371] (**) HAILUCK CO.,LTD USB KEYBOARD System Control: Applying InputClass "libinput keyboard catchall"
[ 15.371] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD System Control'
[ 15.371] (**) HAILUCK CO.,LTD USB KEYBOARD System Control: always reports core events
[ 15.371] (**) Option "Device" "/dev/input/event9"
[ 15.371] (**) Option "_source" "server/udev"
[ 15.376] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: is tagged by udev as: Keyboard
[ 15.376] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device is a keyboard
[ 15.377] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device removed
[ 15.411] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16/event9"
[ 15.411] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD System Control" (type: KEYBOARD, id 9)
[ 15.411] (**) Option "xkb_model" "pc104"
[ 15.411] (**) Option "xkb_layout" "us"
[ 15.412] (**) Option "xkb_options" "lv3:ralt_switch"
[ 15.428] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: is tagged by udev as: Keyboard
[ 15.429] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device is a keyboard
[ 15.433] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Consumer Control (/dev/input/event10)
[ 15.433] (**) HAILUCK CO.,LTD USB KEYBOARD Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 15.433] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Consumer Control'
[ 15.434] (**) HAILUCK CO.,LTD USB KEYBOARD Consumer Control: always reports core events
[ 15.434] (**) Option "Device" "/dev/input/event10"
[ 15.434] (**) Option "_source" "server/udev"
[ 15.438] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: is tagged by udev as: Keyboard
[ 15.438] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device is a keyboard
[ 15.439] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device removed
[ 15.520] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17/event10"
[ 15.520] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Consumer Control" (type: KEYBOARD, id 10)
[ 15.520] (**) Option "xkb_model" "pc104"
[ 15.520] (**) Option "xkb_layout" "us"
[ 15.521] (**) Option "xkb_options" "lv3:ralt_switch"
[ 15.537] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: is tagged by udev as: Keyboard
[ 15.538] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device is a keyboard
[ 15.543] (II) config/udev: Adding input device HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control (/dev/input/event13)
[ 15.543] (**) HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 15.543] (II) Using input driver 'libinput' for 'HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control'
[ 15.543] (**) HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: always reports core events
[ 15.543] (**) Option "Device" "/dev/input/event13"
[ 15.543] (**) Option "_source" "server/udev"
[ 15.548] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: is tagged by udev as: Keyboard
[ 15.548] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device is a keyboard
[ 15.549] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device removed
[ 15.640] (**) Option "config_info" "udev:/sys/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18/event13"
[ 15.640] (II) XINPUT: Adding extended input device "HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control" (type: KEYBOARD, id 11)
[ 15.640] (**) Option "xkb_model" "pc104"
[ 15.640] (**) Option "xkb_layout" "us"
[ 15.640] (**) Option "xkb_options" "lv3:ralt_switch"
[ 15.649] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: is tagged by udev as: Keyboard
[ 15.649] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device is a keyboard
[ 15.653] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 (/dev/input/event0)
[ 15.654] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: Applying InputClass "libinput keyboard catchall"
[ 15.654] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0'
[ 15.654] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: always reports core events
[ 15.654] (**) Option "Device" "/dev/input/event0"
[ 15.654] (**) Option "_source" "server/udev"
[ 15.660] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: is tagged by udev as: Keyboard
[ 15.661] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device is a keyboard
[ 15.662] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device removed
[ 15.720] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0/event0"
[ 15.720] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0" (type: KEYBOARD, id 12)
[ 15.720] (**) Option "xkb_model" "pc104"
[ 15.720] (**) Option "xkb_layout" "us"
[ 15.720] (**) Option "xkb_options" "lv3:ralt_switch"
[ 15.731] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: is tagged by udev as: Keyboard
[ 15.731] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device is a keyboard
[ 15.737] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse (/dev/input/event2)
[ 15.737] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: Applying InputClass "libinput pointer catchall"
[ 15.737] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse'
[ 15.737] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: always reports core events
[ 15.737] (**) Option "Device" "/dev/input/event2"
[ 15.737] (**) Option "_source" "server/udev"
[ 15.814] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: is tagged by udev as: Mouse
[ 15.816] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device is a pointer
[ 15.817] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device removed
[ 15.950] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/event2"
[ 15.950] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse" (type: MOUSE, id 13)
[ 15.951] (**) Option "AccelerationScheme" "none"
[ 15.952] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: (accel) selected scheme none/0
[ 15.952] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: (accel) acceleration factor: 2.000
[ 15.952] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: (accel) acceleration threshold: 4
[ 16.034] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: is tagged by udev as: Mouse
[ 16.036] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device is a pointer
[ 16.042] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse (/dev/input/mouse0)
[ 16.042] (II) No input driver specified, ignoring this device.
[ 16.042] (II) This device may have been added with another device file.
[ 16.044] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control (/dev/input/event3)
[ 16.045] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 16.045] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control'
[ 16.045] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events
[ 16.045] (**) Option "Device" "/dev/input/event3"
[ 16.045] (**) Option "_source" "server/udev"
[ 16.050] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard
[ 16.050] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard
[ 16.051] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed
[ 16.160] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: needs a virtual subdevice
[ 16.160] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3"
[ 16.160] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: MOUSE, id 14)
[ 16.161] (**) Option "AccelerationScheme" "none"
[ 16.161] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) selected scheme none/0
[ 16.162] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration factor: 2.000
[ 16.162] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration threshold: 4
[ 16.174] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard
[ 16.174] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard
[ 16.179] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control (/dev/input/event4)
[ 16.179] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 16.179] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control'
[ 16.179] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events
[ 16.179] (**) Option "Device" "/dev/input/event4"
[ 16.179] (**) Option "_source" "server/udev"
[ 16.186] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard
[ 16.186] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard
[ 16.187] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed
[ 16.220] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: needs a virtual subdevice
[ 16.221] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4"
[ 16.221] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: MOUSE, id 15)
[ 16.222] (**) Option "AccelerationScheme" "none"
[ 16.222] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) selected scheme none/0
[ 16.222] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration factor: 2.000
[ 16.222] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: (accel) acceleration threshold: 4
[ 16.239] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard
[ 16.240] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard
[ 16.244] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control (/dev/input/event6)
[ 16.244] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: Applying InputClass "libinput keyboard catchall"
[ 16.244] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control'
[ 16.244] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: always reports core events
[ 16.244] (**) Option "Device" "/dev/input/event6"
[ 16.244] (**) Option "_source" "server/udev"
[ 16.250] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: is tagged by udev as: Keyboard
[ 16.251] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device is a keyboard
[ 16.251] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device removed
[ 16.320] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5/event6"
[ 16.320] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control" (type: KEYBOARD, id 16)
[ 16.320] (**) Option "xkb_model" "pc104"
[ 16.320] (**) Option "xkb_layout" "us"
[ 16.320] (**) Option "xkb_options" "lv3:ralt_switch"
[ 16.331] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: is tagged by udev as: Keyboard
[ 16.332] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device is a keyboard
[ 16.336] (II) config/udev: Adding input device USB Camera: USB Camera (/dev/input/event11)
[ 16.336] (**) USB Camera: USB Camera: Applying InputClass "libinput keyboard catchall"
[ 16.336] (II) Using input driver 'libinput' for 'USB Camera: USB Camera'
[ 16.336] (**) USB Camera: USB Camera: always reports core events
[ 16.336] (**) Option "Device" "/dev/input/event11"
[ 16.336] (**) Option "_source" "server/udev"
[ 16.350] (II) event11 - USB Camera: USB Camera: is tagged by udev as: Keyboard
[ 16.350] (II) event11 - USB Camera: USB Camera: device is a keyboard
[ 16.350] (II) event11 - USB Camera: USB Camera: device removed
[ 16.480] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event11"
[ 16.480] (II) XINPUT: Adding extended input device "USB Camera: USB Camera" (type: KEYBOARD, id 17)
[ 16.480] (**) Option "xkb_model" "pc104"
[ 16.481] (**) Option "xkb_layout" "us"
[ 16.481] (**) Option "xkb_options" "lv3:ralt_switch"
[ 16.496] (II) event11 - USB Camera: USB Camera: is tagged by udev as: Keyboard
[ 16.496] (II) event11 - USB Camera: USB Camera: device is a keyboard
[ 16.502] (II) config/udev: Adding input device gpio-keys (/dev/input/event5)
[ 16.502] (**) gpio-keys: Applying InputClass "libinput keyboard catchall"
[ 16.502] (II) Using input driver 'libinput' for 'gpio-keys'
[ 16.502] (**) gpio-keys: always reports core events
[ 16.502] (**) Option "Device" "/dev/input/event5"
[ 16.502] (**) Option "_source" "server/udev"
[ 16.504] (II) event5 - gpio-keys: is tagged by udev as: Keyboard Switch
[ 16.504] (II) event5 - gpio-keys: device is a keyboard
[ 16.504] (II) event5 - gpio-keys: device is a switch device
[ 16.505] (II) event5 - gpio-keys: device removed
[ 16.550] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys/input/input13/event5"
[ 16.550] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 18)
[ 16.550] (**) Option "xkb_model" "pc104"
[ 16.550] (**) Option "xkb_layout" "us"
[ 16.551] (**) Option "xkb_options" "lv3:ralt_switch"
[ 16.559] (II) event5 - gpio-keys: is tagged by udev as: Keyboard Switch
[ 16.560] (II) event5 - gpio-keys: device is a keyboard
[ 16.560] (II) event5 - gpio-keys: device is a switch device
[ 16.591] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 16.591] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control'
[ 16.591] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events
[ 16.591] (**) Option "Device" "/dev/input/event3"
[ 16.591] (**) Option "_source" "_driver/libinput"
[ 16.591] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is a virtual subdevice
[ 16.592] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3"
[ 16.592] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: KEYBOARD, id 19)
[ 16.592] (**) Option "xkb_model" "pc104"
[ 16.592] (**) Option "xkb_layout" "us"
[ 16.592] (**) Option "xkb_options" "lv3:ralt_switch"
[ 16.593] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 16.593] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control'
[ 16.593] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: always reports core events
[ 16.593] (**) Option "Device" "/dev/input/event4"
[ 16.593] (**) Option "_source" "_driver/libinput"
[ 16.593] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is a virtual subdevice
[ 16.593] (**) Option "config_info" "udev:/sys/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4"
[ 16.593] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control" (type: KEYBOARD, id 20)
[ 16.593] (**) Option "xkb_model" "pc104"
[ 16.593] (**) Option "xkb_layout" "us"
[ 16.594] (**) Option "xkb_options" "lv3:ralt_switch"
[ 22.367] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device removed
[ 22.400] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device removed
[ 22.490] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device removed
[ 22.570] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device removed
[ 22.610] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device removed
[ 22.700] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device removed
[ 22.780] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device removed
[ 22.820] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device removed
[ 22.910] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device removed
[ 22.950] (II) event11 - USB Camera: USB Camera: device removed
[ 23.050] (II) event5 - gpio-keys: device removed
[ 23.090] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed
[ 23.170] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device removed
[ 23.230] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 441.734] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 441.801] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: is tagged by udev as: Keyboard
[ 441.801] (II) event1 - HAILUCK CO.,LTD USB KEYBOARD: device is a keyboard
[ 441.810] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: is tagged by udev as: Mouse
[ 441.811] (II) event7 - HAILUCK CO.,LTD USB KEYBOARD Mouse: device is a pointer
[ 441.820] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: is tagged by udev as: Touchpad
[ 441.823] (II) event8 - HAILUCK CO.,LTD USB KEYBOARD Touchpad: device is a touchpad
[ 441.828] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: is tagged by udev as: Keyboard
[ 441.829] (II) event9 - HAILUCK CO.,LTD USB KEYBOARD System Control: device is a keyboard
[ 441.834] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: is tagged by udev as: Keyboard
[ 441.834] (II) event10 - HAILUCK CO.,LTD USB KEYBOARD Consumer Control: device is a keyboard
[ 441.839] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: is tagged by udev as: Keyboard
[ 441.840] (II) event13 - HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control: device is a keyboard
[ 441.846] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: is tagged by udev as: Keyboard
[ 441.846] (II) event0 - Microsoft Microsoft® 2.4GHz Transceiver v9.0: device is a keyboard
[ 441.925] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: is tagged by udev as: Mouse
[ 441.927] (II) event2 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse: device is a pointer
[ 441.938] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard
[ 441.939] (II) event3 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard
[ 441.944] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: is tagged by udev as: Keyboard
[ 441.945] (II) event4 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control: device is a keyboard
[ 441.950] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: is tagged by udev as: Keyboard
[ 441.951] (II) event6 - Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control: device is a keyboard
[ 441.955] (II) event11 - USB Camera: USB Camera: is tagged by udev as: Keyboard
[ 441.956] (II) event11 - USB Camera: USB Camera: device is a keyboard
[ 441.958] (II) event5 - gpio-keys: is tagged by udev as: Keyboard Switch
[ 441.958] (II) event5 - gpio-keys: device is a keyboard
[ 441.958] (II) event5 - gpio-keys: device is a switch device
[ 6111.052] (EE) client bug: timer event2 debounce short: scheduled expiry is in the past (-4ms), your system is too slow
udev information:
-----------------
P: /devices/platform/es8316-sound/sound/card0/input11
L: 0
E: DEVPATH=/devices/platform/es8316-sound/sound/card0/input11
E: SUBSYSTEM=input
E: PRODUCT=0/0/0/0
E: NAME="rockchip,es8316-codec Headphones"
E: PHYS="ALSA"
E: PROP=0
E: EV=21
E: SW=4
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: USEC_INITIALIZED=4545274
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=platform-es8316-sound
E: ID_PATH_TAG=platform-es8316-sound
E: ID_FOR_SEAT=input-platform-es8316-sound
E: TAGS=:seat:
P: /devices/platform/es8316-sound/sound/card0/input11/event12
N: input/event12
L: 0
S: input/by-path/platform-es8316-sound-event
E: DEVPATH=/devices/platform/es8316-sound/sound/card0/input11/event12
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event12
E: MAJOR=13
E: MINOR=76
E: USEC_INITIALIZED=8872415
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=platform-es8316-sound
E: ID_PATH_TAG=platform-es8316-sound
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: DEVLINKS=/dev/input/by-path/platform-es8316-sound-event
E: TAGS=:power-switch:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1
L: 0
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1
E: SUBSYSTEM=input
E: PRODUCT=3/258a/1e/110
E: NAME="HAILUCK CO.,LTD USB KEYBOARD"
E: PHYS="usb-fe3a0000.usb-1/input0"
E: UNIQ=""
E: PROP=0
E: EV=120013
E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
E: MSC=10
E: LED=7
E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: USEC_INITIALIZED=4257926
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.0
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_0
E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_0
E: TAGS=:seat:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1/event1
N: input/event1
L: 0
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-kbd
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.0-event-kbd
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0002/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: MAJOR=13
E: MINOR=65
E: USEC_INITIALIZED=9125269
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.0
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-kbd /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.0-event-kbd
E: TAGS=:power-switch:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14
L: 0
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14
E: SUBSYSTEM=input
E: PRODUCT=3/258a/1e/110
E: NAME="HAILUCK CO.,LTD USB KEYBOARD Mouse"
E: PHYS="usb-fe3a0000.usb-1/input1"
E: UNIQ=""
E: PROP=0
E: EV=17
E: KEY=70000 0 0 0 0
E: REL=3
E: MSC=10
E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,2,4,k110,111,112,r0,1,am4,lsfw
E: USEC_INITIALIZED=10228015
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1
E: TAGS=:seat:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/event7
N: input/event7
L: 0
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/event7
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: MAJOR=13
E: MINOR=71
E: USEC_INITIALIZED=10418334
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/mouse1
N: input/mouse1
L: 0
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input14/mouse1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse1
E: MAJOR=13
E: MINOR=33
E: USEC_INITIALIZED=10235226
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15
L: 0
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15
E: SUBSYSTEM=input
E: PRODUCT=3/258a/1e/110
E: NAME="HAILUCK CO.,LTD USB KEYBOARD Touchpad"
E: PHYS="usb-fe3a0000.usb-1/input1"
E: UNIQ=""
E: PROP=5
E: EV=1b
E: KEY=e420 10000 0 0 0 0
E: ABS=2e0800000000003
E: MSC=20
E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,3,4,k110,145,14A,14D,14E,14F,ra0,1,2F,35,36,37,39,m5,lsfw
E: USEC_INITIALIZED=10226933
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1
E: TAGS=:seat:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/event8
N: input/event8
L: 0
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/event8
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: MAJOR=13
E: MINOR=72
E: USEC_INITIALIZED=10563275
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_WIDTH_MM=48
E: ID_INPUT_HEIGHT_MM=31
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-event-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event-mouse
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/mouse2
N: input/mouse2
L: 0
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input15/mouse2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse2
E: MAJOR=13
E: MINOR=34
E: USEC_INITIALIZED=10239041
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: DEVLINKS=/dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-if01-mouse /dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-mouse
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16
L: 0
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16
E: SUBSYSTEM=input
E: PRODUCT=3/258a/1e/110
E: NAME="HAILUCK CO.,LTD USB KEYBOARD System Control"
E: PHYS="usb-fe3a0000.usb-1/input1"
E: UNIQ=""
E: PROP=0
E: EV=13
E: KEY=c000 10000000000000 0
E: MSC=10
E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,k74,8E,8F,ram4,lsfw
E: USEC_INITIALIZED=10234981
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1
E: TAGS=:seat:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16/event9
N: input/event9
L: 0
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input16/event9
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event9
E: MAJOR=13
E: MINOR=73
E: USEC_INITIALIZED=10399946
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1
E: DEVLINKS=/dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event /dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01
E: TAGS=:power-switch:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17
L: 0
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17
E: SUBSYSTEM=input
E: PRODUCT=3/258a/1e/110
E: NAME="HAILUCK CO.,LTD USB KEYBOARD Consumer Control"
E: PHYS="usb-fe3a0000.usb-1/input1"
E: UNIQ=""
E: PROP=0
E: EV=13
E: KEY=28000000000 0 0 1000302000000 3878d8011001 e000000000000 0
E: MSC=10
E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,k71,72,73,80,8C,90,9B,9C,9E,9F,A3,A4,A5,A6,AB,AC,AD,D9,E0,E1,F0,1A7,1A9,ram4,lsfw
E: USEC_INITIALIZED=10234047
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1
E: TAGS=:seat:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17/event10
N: input/event10
L: 0
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input17/event10
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event10
E: MAJOR=13
E: MINOR=74
E: USEC_INITIALIZED=10419663
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1
E: DEVLINKS=/dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event /dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01
E: TAGS=:power-switch:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18
L: 0
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18
E: SUBSYSTEM=input
E: PRODUCT=3/258a/1e/110
E: NAME="HAILUCK CO.,LTD USB KEYBOARD Wireless Radio Control"
E: PHYS="usb-fe3a0000.usb-1/input1"
E: UNIQ=""
E: PROP=0
E: EV=13
E: KEY=80000000000000 0 0 0
E: MSC=10
E: MODALIAS=input:b0003v258Ap001Ee0110-e0,1,4,kF7,ram4,lsfw
E: USEC_INITIALIZED=10225640
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: ID_FOR_SEAT=input-platform-fe3a0000_usb-usb-0_1_1_1
E: TAGS=:seat:
P: /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18/event13
N: input/event13
L: 0
S: input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event
S: input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01
E: DEVPATH=/devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0005/input/input18/event13
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event13
E: MAJOR=13
E: MINOR=77
E: USEC_INITIALIZED=10419600
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=HAILUCK_CO._LTD
E: ID_VENDOR_ENC=HAILUCK\x20CO.\x2cLTD
E: ID_VENDOR_ID=258a
E: ID_MODEL=USB_KEYBOARD
E: ID_MODEL_ENC=USB\x20KEYBOARD
E: ID_MODEL_ID=001e
E: ID_REVISION=0100
E: ID_SERIAL=HAILUCK_CO._LTD_USB_KEYBOARD
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3a0000.usb-usb-0:1:1.1
E: ID_PATH_TAG=platform-fe3a0000_usb-usb-0_1_1_1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/258a/1e:usb-fe3a0000.usb-1
E: DEVLINKS=/dev/input/by-path/platform-fe3a0000.usb-usb-0:1:1.1-event /dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-if01
E: TAGS=:power-switch:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0
L: 0
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0
E: SUBSYSTEM=input
E: PRODUCT=3/45e/7a5/111
E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0"
E: PHYS="usb-fe3c0000.usb-1.1/input0"
E: UNIQ=""
E: PROP=0
E: EV=120013
E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
E: MSC=10
E: LED=7
E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: USEC_INITIALIZED=4276450
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.0
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_0
E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_0
E: TAGS=:seat:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0/event0
N: input/event0
L: 0
S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.0-event-kbd
S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-kbd
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07A5.0001/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: MAJOR=13
E: MINOR=64
E: USEC_INITIALIZED=9123505
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.0
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1
E: DEVLINKS=/dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.0-event-kbd /dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-kbd
E: TAGS=:power-switch:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2
L: 0
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2
E: SUBSYSTEM=input
E: PRODUCT=3/45e/7a5/111
E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 Mouse"
E: PHYS="usb-fe3c0000.usb-1.1/input1"
E: UNIQ=""
E: PROP=0
E: EV=17
E: KEY=1f0000 0 0 0 0
E: REL=1943
E: MSC=10
E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,2,4,k110,111,112,113,114,r0,1,6,8,B,C,am4,lsfw
E: USEC_INITIALIZED=4267926
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1
E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_1
E: TAGS=:seat:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/event2
N: input/event2
L: 0
S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-event-mouse
S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event-mouse
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: MAJOR=13
E: MINOR=66
E: USEC_INITIALIZED=9181032
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1
E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-event-mouse /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event-mouse
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/mouse0
N: input/mouse0
L: 0
S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-mouse
S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-mouse
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input2/mouse0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: MAJOR=13
E: MINOR=32
E: USEC_INITIALIZED=8867755
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1
E: DEVLINKS=/dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-mouse /dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if01-mouse
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3
L: 0
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3
E: SUBSYSTEM=input
E: PRODUCT=3/45e/7a5/111
E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control"
E: PHYS="usb-fe3c0000.usb-1.1/input1"
E: UNIQ=""
E: PROP=0
E: EV=5
E: REL=1040
E: MODALIAS=input:b0003v045Ep07A5e0111-e0,2,kr6,C,amlsfw
E: USEC_INITIALIZED=3947543
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1
E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_1
E: TAGS=:seat:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3
N: input/event3
L: 0
S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if01
S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07A5.0003/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: MAJOR=13
E: MINOR=67
E: USEC_INITIALIZED=9501867
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.1
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if01 /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.1-event
E: TAGS=:power-switch:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4
L: 0
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4
E: SUBSYSTEM=input
E: PRODUCT=3/45e/7a5/111
E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 Consumer Control"
E: PHYS="usb-fe3c0000.usb-1.1/input2"
E: UNIQ=""
E: PROP=0
E: EV=10001f
E: KEY=3f000301ff 0 0 483ffff17aff32d bfd4444600000000 1 130ff38b17c007 ffff7bfad9415fff ffbeffdfffefffff fffffffffffffffe
E: REL=1040
E: ABS=100000000
E: MSC=10
E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,2,3,4,14,k71,72,73,74,75,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E5,E6,E7,E8,E9,EA,EB,F0,F1,F4,100,161,162,166,16A,16E,172,174,176,177,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,247,248,250,251,260,261,262,263,264,265,r6,C,a20,m4,lsfw
E: USEC_INITIALIZED=3956320
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2
E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_2
E: TAGS=:seat:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4
N: input/event4
L: 0
S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if02-event-kbd
S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event-kbd
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input4/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: MAJOR=13
E: MINOR=68
E: USEC_INITIALIZED=9122014
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if02-event-kbd /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event-kbd
E: TAGS=:power-switch:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5
L: 0
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5
E: SUBSYSTEM=input
E: PRODUCT=3/45e/7a5/111
E: NAME="Microsoft Microsoft® 2.4GHz Transceiver v9.0 System Control"
E: PHYS="usb-fe3c0000.usb-1.1/input2"
E: UNIQ=""
E: PROP=0
E: EV=1b
E: KEY=40000001000000 1200000000 0 800000000 40000010cc00 10168000000000 0
E: ABS=10000000000
E: MSC=10
E: MODALIAS=input:b0003v045Ep07A5e0111-e0,1,3,4,k74,8A,8B,8E,8F,94,AE,E3,161,164,198,1B6,ra28,m4,lsfw
E: USEC_INITIALIZED=4038188
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2
E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_1_1_2
E: TAGS=:seat:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5/event6
N: input/event6
L: 0
S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if02
S: input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07A5.0004/input/input5/event6
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: MAJOR=13
E: MINOR=70
E: USEC_INITIALIZED=9116480
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_REVISION=0797
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_USB_DRIVER=usbhid
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.1:1.2
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_1_1_2
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/45e/7a5:usb-fe3c0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-event-if02 /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.1:1.2-event
E: TAGS=:power-switch:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
L: 0
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
E: SUBSYSTEM=input
E: PRODUCT=3/c45/6321/0
E: NAME="USB Camera: USB Camera"
E: PHYS="usb-fe3c0000.usb-1.2/button"
E: PROP=0
E: EV=3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v0C45p6321e0000-e0,1,kD4,ramlsfw
E: USEC_INITIALIZED=4516933
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Sonix_Technology_Co.__Ltd.
E: ID_VENDOR_ENC=Sonix\x20Technology\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=0c45
E: ID_MODEL=USB_Camera
E: ID_MODEL_ENC=USB\x20Camera
E: ID_MODEL_ID=6321
E: ID_REVISION=0000
E: ID_SERIAL=Sonix_Technology_Co.__Ltd._USB_Camera
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.2:1.0
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_2_1_0
E: ID_FOR_SEAT=input-platform-fe3c0000_usb-usb-0_1_2_1_0
E: TAGS=:seat:
P: /devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event11
N: input/event11
L: 0
S: input/by-id/usb-Sonix_Technology_Co.__Ltd._USB_Camera-event-if00
S: input/by-path/platform-fe3c0000.usb-usb-0:1.2:1.0-event
E: DEVPATH=/devices/platform/fe3c0000.usb/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event11
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event11
E: MAJOR=13
E: MINOR=75
E: USEC_INITIALIZED=9197059
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Sonix_Technology_Co.__Ltd.
E: ID_VENDOR_ENC=Sonix\x20Technology\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=0c45
E: ID_MODEL=USB_Camera
E: ID_MODEL_ENC=USB\x20Camera
E: ID_MODEL_ID=6321
E: ID_REVISION=0000
E: ID_SERIAL=Sonix_Technology_Co.__Ltd._USB_Camera
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=platform-fe3c0000.usb-usb-0:1.2:1.0
E: ID_PATH_TAG=platform-fe3c0000_usb-usb-0_1_2_1_0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/c45/6321:usb-fe3c0000.usb-1
E: DEVLINKS=/dev/input/by-id/usb-Sonix_Technology_Co.__Ltd._USB_Camera-event-if00 /dev/input/by-path/platform-fe3c0000.usb-usb-0:1.2:1.0-event
E: TAGS=:power-switch:
P: /devices/platform/gpio-keys/input/input13
L: 0
E: DEVPATH=/devices/platform/gpio-keys/input/input13
E: SUBSYSTEM=input
E: PRODUCT=19/1/1/100
E: NAME="gpio-keys"
E: PHYS="gpio-keys/input0"
E: PROP=0
E: EV=23
E: KEY=10000000000000 0
E: SW=1
E: MODALIAS=input:b0019v0001p0001e0100-e0,1,5,k74,ramlsfw0,
E: USEC_INITIALIZED=9626232
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=platform-gpio-keys
E: ID_PATH_TAG=platform-gpio-keys
E: ID_FOR_SEAT=input-platform-gpio-keys
E: TAGS=:seat:
P: /devices/platform/gpio-keys/input/input13/event5
N: input/event5
L: 0
S: input/by-path/platform-gpio-keys-event
E: DEVPATH=/devices/platform/gpio-keys/input/input13/event5
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: MAJOR=13
E: MINOR=69
E: USEC_INITIALIZED=10389183
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=platform-gpio-keys
E: ID_PATH_TAG=platform-gpio-keys
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=lv3:ralt_switch
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/1/1:gpio-keys
E: DEVLINKS=/dev/input/by-path/platform-gpio-keys-event
E: TAGS=:power-switch:
DRM Information from dmesg:
---------------------------
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 4.284117] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[ 4.285907] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[ 4.287151] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_dp_component_ops [rockchipdrm])
[ 4.287612] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[ 4.287701] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm])
[ 4.287709] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.287712] [drm] No driver support for vblank timestamp query.
[ 4.745484] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
[ 4.781295] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 9.207084] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 1
[ 6045.141622] WARNING: CPU: 0 PID: 697 at drivers/gpu/drm/panfrost/panfrost_mmu.c:458 panfrost_mmu_map_fault_addr+0x368/0x440 [panfrost]
[ 6045.141626] Modules linked in: bnep panfrost gpio_keys hci_uart btqca btbcm btintel btsdio bluetooth hid_multitouch dw_wdt rockchip_rga joydev videobuf2_dma_sg cw2015_battery ecdh_generic brcmfmac ecc snd_soc_hdmi_codec dm_crypt gpu_sched nf_defrag_ipv6 pwm_fan cfg80211 rfkill brcmutil nvme nvme_core snd_soc_rockchip_i2s uvcvideo snd_soc_rockchip_pcm snd_soc_simple_amplifier rockchip_thermal snd_soc_es8316 rockchip_saradc rockchipdrm analogix_dp dw_hdmi cec dw_mipi_dsi drm_kms_helper syscopyarea panel_simple sysfillrect sysimgblt fb_sys_fops snd_soc_simple_card snd_soc_simple_card_utils pwm_bl drm drm_panel_orientation_quirks
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: arm64 (aarch64)
Kernel: Linux 5.5.0-1-pinebookpro-arm64 (SMP w/6 CPU cores; PREEMPT)
Kernel taint flags: TAINT_WARN
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages libgl1-mesa-dri depends on:
ii libc6 2.29-10
ii libdrm-amdgpu1 2.4.100-4
ii libdrm-nouveau2 2.4.100-4
ii libdrm-radeon1 2.4.100-4
ii libdrm2 2.4.100-4
ii libelf1 0.176-1.1
ii libexpat1 2.2.9-1
ii libgcc-s1 10-20200222-1
ii libglapi-mesa 20.0.0-1
ii libllvm9 1:9.0.1-8
ii libsensors5 1:3.6.0-2
ii libstdc++6 10-20200222-1
ii libzstd1 1.4.4+dfsg-3
ii zlib1g 1:1.2.11.dfsg-1.2
libgl1-mesa-dri recommends no packages.
libgl1-mesa-dri suggests no packages.
Versions of packages xserver-xorg depends on:
ii x11-xkb-utils 7.7+4
ii xkb-data 2.26-2
ii xserver-xorg-core 2:1.20.7-3
ii xserver-xorg-input-all 1:7.7+20
ii xserver-xorg-input-libinput [xorg-driver-input] 0.29.0-1
ii xserver-xorg-input-wacom [xorg-driver-input] 0.34.99.1-1
ii xserver-xorg-video-all 1:7.7+20
ii xserver-xorg-video-amdgpu [xorg-driver-video] 19.1.0-1
ii xserver-xorg-video-ati [xorg-driver-video] 1:19.1.0-1
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.5.0-1
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.16-1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:19.1.0-1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.4.0-2
Versions of packages xserver-xorg recommends:
ii xserver-xorg-legacy 2:1.20.7-3
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.194
ii libaudit1 1:2.8.5-2+b1
ii libbsd0 0.10.0-1
ii libc6 2.29-10
ii libdbus-1-3 1.12.16-2
ii libdrm2 2.4.100-4
ii libegl1 1.3.1-1
ii libepoxy0 1.5.4-1
ii libgbm1 20.0.0-1
ii libgcrypt20 1.8.5-5
ii libgl1 1.3.1-1
ii libpciaccess0 0.14-1
ii libpixman-1-0 0.36.0-1
ii libselinux1 3.0-1+b1
ii libsystemd0 244.3-1
ii libudev1 244.3-1
ii libunwind8 1.2.1-9
ii libxau6 1:1.0.8-1+b2
ii libxdmcp6 1:1.1.2-3
ii libxfont2 1:2.0.3-1
ii libxshmfence1 1.3-1
ii udev 244.3-1
ii xserver-common 2:1.20.7-3
Versions of packages xserver-xorg-core recommends:
ii libpam-systemd 244.3-1
Versions of packages xserver-xorg-core suggests:
ii xfonts-100dpi 1:1.0.4+nmu1
ii xfonts-75dpi 1:1.0.4+nmu1
ii xfonts-scalable 1:1.0.3-1.1
-- no debconf information
Reply to: