Bug#932773: xserver-xorg: "no signal" on monitor when computer goes in suspend mode in Buster
Package: xserver-xorg
Version: 1:7.7+19
Severity: important
Tags: a11y
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.19.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.37-5+deb10u1 (2019-07-19)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 jkanders jkanders 28076 Jul 22 18:46 /home/jkanders/.local/share/xorg/Xorg.0.log
Contents of most recent Xorg X server log file (/home/jkanders/.local/share/xorg/Xorg.0.log):
---------------------------------------------------------------------------------------------
[ 23.583] (--) Log file renamed from "/home/jkanders/.local/share/xorg/Xorg.pid-782.log" to "/home/jkanders/.local/share/xorg/Xorg.0.log"
[ 23.584]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 23.584] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[ 23.584] Current Operating System: Linux garage 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5+deb10u1 (2019-07-19) x86_64
[ 23.584] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=7cf2c7ad-83bf-4d6e-9306-26d7b0739241 ro quiet
[ 23.584] Build Date: 05 March 2019 08:11:12PM
[ 23.584] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[ 23.585] Current version of pixman: 0.36.0
[ 23.585] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.585] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.585] (==) Log file: "/home/jkanders/.local/share/xorg/Xorg.0.log", Time: Mon Jul 22 18:46:51 2019
[ 23.586] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.588] (==) No Layout section. Using the first Screen section.
[ 23.588] (==) No screen section available. Using defaults.
[ 23.588] (**) |-->Screen "Default Screen Section" (0)
[ 23.588] (**) | |-->Monitor "<default monitor>"
[ 23.590] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.590] (==) Automatically adding devices
[ 23.590] (==) Automatically enabling devices
[ 23.591] (==) Automatically adding GPU devices
[ 23.591] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 23.591] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.591] Entry deleted from font path.
[ 23.592] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 23.592] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.592] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.593] (II) Loader magic: 0x55d11e7e4e20
[ 23.593] (II) Module ABI versions:
[ 23.593] X.Org ANSI C Emulation: 0.4
[ 23.593] X.Org Video Driver: 24.0
[ 23.593] X.Org XInput driver : 24.1
[ 23.593] X.Org Server Extension : 10.0
[ 23.601] (++) using VT number 2
[ 23.608] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 23.613] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.615] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 23.621] (--) PCI:*(0@0:2:0) 8086:0f31:1019:a8dd rev 14, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8, BIOS @ 0x????????/131072
[ 23.622] (II) LoadModule: "glx"
[ 23.623] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.628] (II) Module glx: vendor="X.Org Foundation"
[ 23.628] compiled for 1.20.4, module version = 1.0.0
[ 23.628] ABI class: X.Org Server Extension, version 10.0
[ 23.628] (==) Matched modesetting as autoconfigured driver 0
[ 23.628] (==) Matched fbdev as autoconfigured driver 1
[ 23.628] (==) Matched vesa as autoconfigured driver 2
[ 23.628] (==) Assigned the driver to the xf86ConfigLayout
[ 23.628] (II) LoadModule: "modesetting"
[ 23.629] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23.632] (II) Module modesetting: vendor="X.Org Foundation"
[ 23.632] compiled for 1.20.4, module version = 1.20.4
[ 23.633] Module class: X.Org Video Driver
[ 23.633] ABI class: X.Org Video Driver, version 24.0
[ 23.633] (II) LoadModule: "fbdev"
[ 23.633] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.635] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.635] compiled for 1.20.0, module version = 0.5.0
[ 23.636] Module class: X.Org Video Driver
[ 23.636] ABI class: X.Org Video Driver, version 24.0
[ 23.636] (II) LoadModule: "vesa"
[ 23.636] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.637] (II) Module vesa: vendor="X.Org Foundation"
[ 23.637] compiled for 1.20.1, module version = 2.4.0
[ 23.638] Module class: X.Org Video Driver
[ 23.638] ABI class: X.Org Video Driver, version 24.0
[ 23.638] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 23.638] (II) FBDEV: driver for framebuffer: fbdev
[ 23.638] (II) VESA: driver for VESA chipsets: vesa
[ 23.639] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 23.639] (II) modeset(0): using drv /dev/dri/card0
[ 23.639] (WW) Falling back to old probe method for fbdev
[ 23.639] (II) Loading sub module "fbdevhw"
[ 23.639] (II) LoadModule: "fbdevhw"
[ 23.640] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.641] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.641] compiled for 1.20.4, module version = 0.0.2
[ 23.641] ABI class: X.Org Video Driver, version 24.0
[ 23.641] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 23.641] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.641] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 23.642] (==) modeset(0): RGB weight 888
[ 23.642] (==) modeset(0): Default visual is TrueColor
[ 23.642] (II) Loading sub module "glamoregl"
[ 23.642] (II) LoadModule: "glamoregl"
[ 23.642] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 23.658] (II) Module glamoregl: vendor="X.Org Foundation"
[ 23.658] compiled for 1.20.4, module version = 1.0.1
[ 23.658] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.704] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Bay Trail
[ 23.705] (II) modeset(0): glamor initialized
[ 23.732] (II) modeset(0): Output VGA-1 has no monitor section
[ 23.734] (II) modeset(0): Output DP-1 has no monitor section
[ 23.735] (II) modeset(0): Output HDMI-1 has no monitor section
[ 23.768] (II) modeset(0): EDID for output VGA-1
[ 23.768] (II) modeset(0): Manufacturer: HIQ Model: 5001 Serial#: 20051019
[ 23.768] (II) modeset(0): Year: 2005 Week: 42
[ 23.768] (II) modeset(0): EDID Version: 1.3
[ 23.768] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 23.768] (II) modeset(0): Sync: Separate
[ 23.768] (II) modeset(0): Max Image Size [cm]: horiz.: 33 vert.: 27
[ 23.768] (II) modeset(0): Gamma: 2.20
[ 23.768] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 23.768] (II) modeset(0): First detailed timing not preferred mode in violation of standard!
[ 23.768] (II) modeset(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 23.768] (II) modeset(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 23.768] (II) modeset(0): Supported established timings:
[ 23.768] (II) modeset(0): 720x400@70Hz
[ 23.768] (II) modeset(0): 640x480@60Hz
[ 23.769] (II) modeset(0): 640x480@75Hz
[ 23.769] (II) modeset(0): 800x600@60Hz
[ 23.769] (II) modeset(0): 800x600@75Hz
[ 23.769] (II) modeset(0): 1024x768@60Hz
[ 23.769] (II) modeset(0): 1024x768@70Hz
[ 23.769] (II) modeset(0): 1024x768@75Hz
[ 23.769] (II) modeset(0): 1280x1024@75Hz
[ 23.769] (II) modeset(0): Manufacturer's mask: 0
[ 23.769] (II) modeset(0): Supported standard timings:
[ 23.769] (II) modeset(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.769] (II) modeset(0): Supported detailed timing:
[ 23.769] (II) modeset(0): clock: 108.0 MHz Image Size: 337 x 270 mm
[ 23.769] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 23.769] (II) modeset(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 23.769] (II) modeset(0): Supported detailed timing:
[ 23.769] (II) modeset(0): clock: 28.3 MHz Image Size: 337 x 270 mm
[ 23.769] (II) modeset(0): h_active: 720 h_sync: 738 h_sync_end 846 h_blank_end 900 h_border: 0
[ 23.769] (II) modeset(0): v_active: 400 v_sync: 413 v_sync_end 415 v_blanking: 449 v_border: 0
[ 23.769] (II) modeset(0): Supported detailed timing:
[ 23.769] (II) modeset(0): clock: 25.2 MHz Image Size: 337 x 270 mm
[ 23.769] (II) modeset(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
[ 23.769] (II) modeset(0): v_active: 480 v_sync: 490 v_sync_end 492 v_blanking: 525 v_border: 0
[ 23.769] (II) modeset(0): Monitor name: L72S
[ 23.769] (II) modeset(0): EDID (in hex):
[ 23.769] (II) modeset(0): 00ffffffffffff00213101504bf43101
[ 23.769] (II) modeset(0): 2a0f010308211b78e8aea5a6544c9926
[ 23.769] (II) modeset(0): 145054a54f0081800101010101010101
[ 23.769] (II) modeset(0): 010101010101302a009851002a403070
[ 23.769] (II) modeset(0): 1300510e1100001e100bd0b420903110
[ 23.770] (II) modeset(0): 126cd200510e1100001cd50980a020e0
[ 23.770] (II) modeset(0): 2d101060a200510e11000018000000fc
[ 23.770] (II) modeset(0): 004c3732530a202020202020202000c1
[ 23.770] (II) modeset(0): Printing probed modes for output VGA-1
[ 23.770] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 23.770] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 23.770] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 23.770] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 23.770] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.770] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 23.770] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.770] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 23.770] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.770] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 413 415 449 -hsync +vsync (31.5 kHz e)
[ 23.770] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 23.771] (II) modeset(0): EDID for output DP-1
[ 23.772] (II) modeset(0): EDID for output HDMI-1
[ 23.772] (II) modeset(0): Output VGA-1 connected
[ 23.773] (II) modeset(0): Output DP-1 disconnected
[ 23.773] (II) modeset(0): Output HDMI-1 disconnected
[ 23.773] (II) modeset(0): Using exact sizes for initial modes
[ 23.773] (II) modeset(0): Output VGA-1 using initial mode 1280x1024 +0+0
[ 23.773] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.773] (==) modeset(0): DPI set to (96, 96)
[ 23.773] (II) Loading sub module "fb"
[ 23.773] (II) LoadModule: "fb"
[ 23.773] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.775] (II) Module fb: vendor="X.Org Foundation"
[ 23.775] compiled for 1.20.4, module version = 1.0.0
[ 23.775] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.775] (II) UnloadModule: "fbdev"
[ 23.775] (II) Unloading fbdev
[ 23.775] (II) UnloadSubModule: "fbdevhw"
[ 23.775] (II) Unloading fbdevhw
[ 23.775] (II) UnloadModule: "vesa"
[ 23.775] (II) Unloading vesa
[ 23.793] (==) modeset(0): Backing store enabled
[ 23.793] (==) modeset(0): Silken mouse enabled
[ 23.810] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 23.810] (==) modeset(0): DPMS enabled
[ 23.813] (II) modeset(0): [DRI2] Setup complete
[ 23.813] (II) modeset(0): [DRI2] DRI driver: i965
[ 23.813] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 23.813] (II) Initializing extension Generic Event Extension
[ 23.814] (II) Initializing extension SHAPE
[ 23.815] (II) Initializing extension MIT-SHM
[ 23.817] (II) Initializing extension XInputExtension
[ 23.819] (II) Initializing extension XTEST
[ 23.820] (II) Initializing extension BIG-REQUESTS
[ 23.820] (II) Initializing extension SYNC
[ 23.821] (II) Initializing extension XKEYBOARD
[ 23.821] (II) Initializing extension XC-MISC
[ 23.821] (II) Initializing extension SECURITY
[ 23.822] (II) Initializing extension XFIXES
[ 23.822] (II) Initializing extension RENDER
[ 23.823] (II) Initializing extension RANDR
[ 23.823] (II) Initializing extension COMPOSITE
[ 23.839] (II) Initializing extension DAMAGE
[ 23.840] (II) Initializing extension MIT-SCREEN-SAVER
[ 23.840] (II) Initializing extension DOUBLE-BUFFER
[ 23.841] (II) Initializing extension RECORD
[ 23.842] (II) Initializing extension DPMS
[ 23.842] (II) Initializing extension Present
[ 23.843] (II) Initializing extension DRI3
[ 23.844] (II) Initializing extension X-Resource
[ 23.844] (II) Initializing extension XVideo
[ 23.845] (II) Initializing extension XVideo-MotionCompensation
[ 23.845] (II) Initializing extension SELinux
[ 23.845] (II) SELinux: Disabled on system
[ 23.845] (II) Initializing extension GLX
[ 23.859] (II) AIGLX: Loaded and initialized i965
[ 23.859] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.859] (II) Initializing extension XFree86-VidModeExtension
[ 23.860] (II) Initializing extension XFree86-DGA
[ 23.861] (II) Initializing extension XFree86-DRI
[ 23.862] (II) Initializing extension DRI2
[ 23.867] (II) modeset(0): Damage tracking initialized
[ 23.867] (II) modeset(0): Setting screen physical size to 338 x 270
[ 24.030] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 24.031] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 24.031] (II) LoadModule: "libinput"
[ 24.032] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 24.052] (II) Module libinput: vendor="X.Org Foundation"
[ 24.052] compiled for 1.20.4, module version = 0.28.2
[ 24.052] Module class: X.Org XInput Driver
[ 24.052] ABI class: X.Org XInput driver, version 24.1
[ 24.052] (II) Using input driver 'libinput' for 'Power Button'
[ 24.056] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0
[ 24.056] (**) Power Button: always reports core events
[ 24.056] (**) Option "Device" "/dev/input/event2"
[ 24.056] (**) Option "_source" "server/udev"
[ 24.061] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 24.061] (II) event2 - Power Button: device is a keyboard
[ 24.062] (II) event2 - Power Button: device removed
[ 24.062] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 24.062] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.062] (**) Option "xkb_model" "pc105"
[ 24.062] (**) Option "xkb_layout" "us"
[ 24.064] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 24.064] (II) event2 - Power Button: device is a keyboard
[ 24.066] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 24.066] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 24.066] (II) Using input driver 'libinput' for 'Video Bus'
[ 24.070] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[ 24.070] (**) Video Bus: always reports core events
[ 24.070] (**) Option "Device" "/dev/input/event3"
[ 24.070] (**) Option "_source" "server/udev"
[ 24.073] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 24.073] (II) event3 - Video Bus: device is a keyboard
[ 24.073] (II) event3 - Video Bus: device removed
[ 24.073] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 24.073] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.073] (**) Option "xkb_model" "pc105"
[ 24.073] (**) Option "xkb_layout" "us"
[ 24.076] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 24.076] (II) event3 - Video Bus: device is a keyboard
[ 24.078] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.079] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 24.079] (II) Using input driver 'libinput' for 'Power Button'
[ 24.083] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
[ 24.083] (**) Power Button: always reports core events
[ 24.083] (**) Option "Device" "/dev/input/event0"
[ 24.083] (**) Option "_source" "server/udev"
[ 24.086] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 24.086] (II) event0 - Power Button: device is a keyboard
[ 24.086] (II) event0 - Power Button: device removed
[ 24.086] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 24.086] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 24.086] (**) Option "xkb_model" "pc105"
[ 24.086] (**) Option "xkb_layout" "us"
[ 24.089] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 24.089] (II) event0 - Power Button: device is a keyboard
[ 24.091] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 24.091] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 24.091] (II) Using input driver 'libinput' for 'Sleep Button'
[ 24.097] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 26 paused 0
[ 24.097] (**) Sleep Button: always reports core events
[ 24.097] (**) Option "Device" "/dev/input/event1"
[ 24.097] (**) Option "_source" "server/udev"
[ 24.101] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 24.101] (II) event1 - Sleep Button: device is a keyboard
[ 24.102] (II) event1 - Sleep Button: device removed
[ 24.102] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 24.102] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 24.102] (**) Option "xkb_model" "pc105"
[ 24.102] (**) Option "xkb_layout" "us"
[ 24.106] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 24.106] (II) event1 - Sleep Button: device is a keyboard
[ 24.111] (II) config/udev: Adding input device Barcode Reader (/dev/input/event4)
[ 24.111] (**) Barcode Reader : Applying InputClass "libinput keyboard catchall"
[ 24.111] (II) Using input driver 'libinput' for 'Barcode Reader '
[ 24.115] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[ 24.116] (**) Barcode Reader : always reports core events
[ 24.116] (**) Option "Device" "/dev/input/event4"
[ 24.116] (**) Option "_source" "server/udev"
[ 24.121] (II) event4 - Barcode Reader : is tagged by udev as: Keyboard
[ 24.121] (II) event4 - Barcode Reader : device is a keyboard
[ 24.121] (II) event4 - Barcode Reader : device removed
[ 24.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:13BA:0018.0001/input/input4/event4"
[ 24.122] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 10)
[ 24.122] (**) Option "xkb_model" "pc105"
[ 24.122] (**) Option "xkb_layout" "us"
[ 24.128] (II) event4 - Barcode Reader : is tagged by udev as: Keyboard
[ 24.128] (II) event4 - Barcode Reader : device is a keyboard
[ 24.131] (II) config/udev: Adding input device Barcode Reader Mouse (/dev/input/event5)
[ 24.131] (**) Barcode Reader Mouse: Applying InputClass "libinput pointer catchall"
[ 24.131] (II) Using input driver 'libinput' for 'Barcode Reader Mouse'
[ 24.136] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 28 paused 0
[ 24.136] (**) Barcode Reader Mouse: always reports core events
[ 24.136] (**) Option "Device" "/dev/input/event5"
[ 24.136] (**) Option "_source" "server/udev"
[ 24.140] (II) event5 - Barcode Reader Mouse: is tagged by udev as: Mouse
[ 24.141] (II) event5 - Barcode Reader Mouse: device is a pointer
[ 24.141] (II) event5 - Barcode Reader Mouse: device removed
[ 24.142] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input5/event5"
[ 24.142] (II) XINPUT: Adding extended input device "Barcode Reader Mouse" (type: MOUSE, id 11)
[ 24.143] (**) Option "AccelerationScheme" "none"
[ 24.143] (**) Barcode Reader Mouse: (accel) selected scheme none/0
[ 24.143] (**) Barcode Reader Mouse: (accel) acceleration factor: 2.000
[ 24.143] (**) Barcode Reader Mouse: (accel) acceleration threshold: 4
[ 24.149] (II) event5 - Barcode Reader Mouse: is tagged by udev as: Mouse
[ 24.149] (II) event5 - Barcode Reader Mouse: device is a pointer
[ 24.152] (II) config/udev: Adding input device Barcode Reader Mouse (/dev/input/mouse0)
[ 24.152] (II) No input driver specified, ignoring this device.
[ 24.152] (II) This device may have been added with another device file.
[ 24.155] (II) config/udev: Adding input device Barcode Reader System Control (/dev/input/event6)
[ 24.155] (**) Barcode Reader System Control: Applying InputClass "libinput keyboard catchall"
[ 24.156] (II) Using input driver 'libinput' for 'Barcode Reader System Control'
[ 24.159] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 29 paused 0
[ 24.160] (**) Barcode Reader System Control: always reports core events
[ 24.160] (**) Option "Device" "/dev/input/event6"
[ 24.160] (**) Option "_source" "server/udev"
[ 24.164] (II) event6 - Barcode Reader System Control: is tagged by udev as: Keyboard
[ 24.164] (II) event6 - Barcode Reader System Control: device is a keyboard
[ 24.165] (II) event6 - Barcode Reader System Control: device removed
[ 24.165] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input6/event6"
[ 24.165] (II) XINPUT: Adding extended input device "Barcode Reader System Control" (type: KEYBOARD, id 12)
[ 24.165] (**) Option "xkb_model" "pc105"
[ 24.165] (**) Option "xkb_layout" "us"
[ 24.170] (II) event6 - Barcode Reader System Control: is tagged by udev as: Keyboard
[ 24.170] (II) event6 - Barcode Reader System Control: device is a keyboard
[ 24.173] (II) config/udev: Adding input device Barcode Reader Consumer Control (/dev/input/event7)
[ 24.173] (**) Barcode Reader Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 24.173] (II) Using input driver 'libinput' for 'Barcode Reader Consumer Control'
[ 24.178] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[ 24.178] (**) Barcode Reader Consumer Control: always reports core events
[ 24.178] (**) Option "Device" "/dev/input/event7"
[ 24.178] (**) Option "_source" "server/udev"
[ 24.184] (II) event7 - Barcode Reader Consumer Control: is tagged by udev as: Keyboard
[ 24.184] (II) event7 - Barcode Reader Consumer Control: device is a keyboard
[ 24.185] (II) event7 - Barcode Reader Consumer Control: device removed
[ 24.185] (II) libinput: Barcode Reader Consumer Control: needs a virtual subdevice
[ 24.185] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input7/event7"
[ 24.185] (II) XINPUT: Adding extended input device "Barcode Reader Consumer Control" (type: MOUSE, id 13)
[ 24.185] (**) Option "AccelerationScheme" "none"
[ 24.185] (**) Barcode Reader Consumer Control: (accel) selected scheme none/0
[ 24.185] (**) Barcode Reader Consumer Control: (accel) acceleration factor: 2.000
[ 24.185] (**) Barcode Reader Consumer Control: (accel) acceleration threshold: 4
[ 24.190] (II) event7 - Barcode Reader Consumer Control: is tagged by udev as: Keyboard
[ 24.190] (II) event7 - Barcode Reader Consumer Control: device is a keyboard
[ 24.193] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 24.193] (II) No input driver specified, ignoring this device.
[ 24.193] (II) This device may have been added with another device file.
[ 24.194] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 24.194] (II) No input driver specified, ignoring this device.
[ 24.195] (II) This device may have been added with another device file.
[ 24.197] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[ 24.197] (II) No input driver specified, ignoring this device.
[ 24.197] (II) This device may have been added with another device file.
[ 24.198] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 24.198] (II) No input driver specified, ignoring this device.
[ 24.198] (II) This device may have been added with another device file.
[ 24.219] (**) Barcode Reader Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 24.220] (II) Using input driver 'libinput' for 'Barcode Reader Consumer Control'
[ 24.220] (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
[ 24.220] (**) Barcode Reader Consumer Control: always reports core events
[ 24.220] (**) Option "Device" "/dev/input/event7"
[ 24.220] (**) Option "_source" "_driver/libinput"
[ 24.220] (II) libinput: Barcode Reader Consumer Control: is a virtual subdevice
[ 24.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input7/event7"
[ 24.220] (II) XINPUT: Adding extended input device "Barcode Reader Consumer Control" (type: KEYBOARD, id 14)
[ 24.220] (**) Option "xkb_model" "pc105"
[ 24.220] (**) Option "xkb_layout" "us"
[ 25.304] (II) modeset(0): EDID vendor "HIQ", prod id 20481
[ 25.304] (II) modeset(0): Printing DDC gathered Modelines:
[ 25.304] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 25.305] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 413 415 449 -hsync +vsync (31.5 kHz e)
[ 25.305] (II) modeset(0): Modeline "640x480"x0.0 25.17 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 25.305] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 25.305] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 25.305] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 25.305] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 25.306] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 25.306] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 25.306] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 25.306] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 25.306] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PROP=0
E: EV=3
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=2821444
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: MAJOR=13
E: MINOR=66
E: USEC_INITIALIZED=6472301
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
E: SUBSYSTEM=input
E: PRODUCT=19/0/6/0
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PROP=0
E: EV=3
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: USEC_INITIALIZED=3121805
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3
N: input/event3
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: MAJOR=13
E: MINOR=67
E: USEC_INITIALIZED=6499508
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PROP=0
E: EV=3
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=2796435
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0
N: input/event0
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: MAJOR=13
E: MINOR=64
E: USEC_INITIALIZED=6495864
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
E: SUBSYSTEM=input
E: PRODUCT=19/0/3/0
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PROP=0
E: EV=3
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: USEC_INITIALIZED=2816560
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1
N: input/event1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: MAJOR=13
E: MINOR=65
E: USEC_INITIALIZED=6524913
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/3:PNP0C0E/button
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:13BA:0018.0001/input/input4
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:13BA:0018.0001/input/input4
E: SUBSYSTEM=input
E: PRODUCT=3/13ba/18/110
E: NAME="Barcode Reader "
E: PHYS="usb-0000:00:14.0-2/input0"
E: UNIQ=""
E: PROP=0
E: EV=120013
E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
E: MSC=10
E: LED=7
E: MODALIAS=input:b0003v13BAp0018e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: USEC_INITIALIZED=3621043
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_2_1_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:13BA:0018.0001/input/input4/event4
N: input/event4
L: 0
S: input/by-id/usb-13ba_Barcode_Reader-event-kbd
S: input/by-path/pci-0000:00:14.0-usb-0:2:1.0-event-kbd
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:13BA:0018.0001/input/input4/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: MAJOR=13
E: MINOR=68
E: USEC_INITIALIZED=6544673
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/13ba/18:usb-0000:00:14.0-2
E: DEVLINKS=/dev/input/by-id/usb-13ba_Barcode_Reader-event-kbd /dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.0-event-kbd
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input5
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input5
E: SUBSYSTEM=input
E: PRODUCT=3/13ba/18/110
E: NAME="Barcode Reader Mouse"
E: PHYS="usb-0000:00:14.0-2/input1"
E: UNIQ=""
E: PROP=0
E: EV=17
E: KEY=1f0000 0 0 0 0
E: REL=103
E: MSC=10
E: MODALIAS=input:b0003v13BAp0018e0110-e0,1,2,4,k110,111,112,113,114,r0,1,8,am4,lsfw
E: USEC_INITIALIZED=3614685
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_1
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_2_1_1
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input5/event5
N: input/event5
L: 0
S: input/by-id/usb-13ba_Barcode_Reader-if01-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:2:1.1-event-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input5/event5
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: MAJOR=13
E: MINOR=69
E: USEC_INITIALIZED=6524157
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_1
E: LIBINPUT_DEVICE_GROUP=3/13ba/18:usb-0000:00:14.0-2
E: DEVLINKS=/dev/input/by-id/usb-13ba_Barcode_Reader-if01-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.1-event-mouse
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input5/mouse0
N: input/mouse0
L: 0
S: input/by-path/pci-0000:00:14.0-usb-0:2:1.1-mouse
S: input/by-id/usb-13ba_Barcode_Reader-if01-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input5/mouse0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: MAJOR=13
E: MINOR=32
E: USEC_INITIALIZED=6036720
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_1
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.1-mouse /dev/input/by-id/usb-13ba_Barcode_Reader-if01-mouse
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input6
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input6
E: SUBSYSTEM=input
E: PRODUCT=3/13ba/18/110
E: NAME="Barcode Reader System Control"
E: PHYS="usb-0000:00:14.0-2/input1"
E: UNIQ=""
E: PROP=0
E: EV=13
E: KEY=c000 10000000000000 0
E: MSC=10
E: MODALIAS=input:b0003v13BAp0018e0110-e0,1,4,k74,8E,8F,ram4,lsfw
E: USEC_INITIALIZED=3614568
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_1
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_2_1_1
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input6/event6
N: input/event6
L: 0
S: input/by-id/usb-13ba_Barcode_Reader-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:2:1.1-event
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input6/event6
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: MAJOR=13
E: MINOR=70
E: USEC_INITIALIZED=6497139
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/13ba/18:usb-0000:00:14.0-2
E: DEVLINKS=/dev/input/by-id/usb-13ba_Barcode_Reader-event-if01 /dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.1-event
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input7
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input7
E: SUBSYSTEM=input
E: PRODUCT=3/13ba/18/110
E: NAME="Barcode Reader Consumer Control"
E: PHYS="usb-0000:00:14.0-2/input1"
E: UNIQ=""
E: PROP=0
E: EV=1f
E: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 1 130c130b17c000 267bfad9415fed 9e168000004400 10000002
E: REL=40
E: ABS=100000000
E: MSC=10
E: MODALIAS=input:b0003v13BAp0018e0110-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B1,B2,B5,CE,CF,D0,D1,D2,D4,D8,D9,DB,E0,E1,E4,EA,EB,F0,F1,F4,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,250,251,r6,a20,m4,lsfw
E: USEC_INITIALIZED=3618575
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_1
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_2_1_1
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input7/event7
N: input/event7
L: 0
S: input/by-id/usb-13ba_Barcode_Reader-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:2:1.1-event
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:13BA:0018.0002/input/input7/event7
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: MAJOR=13
E: MINOR=71
E: USEC_INITIALIZED=6624498
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=13ba
E: ID_VENDOR_ENC=13ba
E: ID_VENDOR_ID=13ba
E: ID_MODEL=Barcode_Reader
E: ID_MODEL_ENC=Barcode\x20Reader\x20
E: ID_MODEL_ID=0018
E: ID_REVISION=0001
E: ID_SERIAL=13ba_Barcode_Reader
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/13ba/18:usb-0000:00:14.0-2
E: DEVLINKS=/dev/input/by-id/usb-13ba_Barcode_Reader-event-if01 /dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.1-event
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: SUBSYSTEM=input
E: PRODUCT=0/0/0/0
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PROP=0
E: EV=21
E: SW=4
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: USEC_INITIALIZED=6762292
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
N: input/event10
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event10
E: MAJOR=13
E: MINOR=74
E: USEC_INITIALIZED=6841730
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: SUBSYSTEM=input
E: PRODUCT=0/0/0/0
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PROP=0
E: EV=21
E: SW=140
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: USEC_INITIALIZED=6768453
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event11
E: MAJOR=13
E: MINOR=75
E: USEC_INITIALIZED=6842584
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: SUBSYSTEM=input
E: PRODUCT=0/0/0/0
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PROP=0
E: EV=21
E: SW=10
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: USEC_INITIALIZED=6762478
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
N: input/event9
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event9
E: MAJOR=13
E: MINOR=73
E: USEC_INITIALIZED=6843003
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: TAGS=:power-switch:
P: /devices/platform/pcspkr/input/input8
L: 0
E: DEVPATH=/devices/platform/pcspkr/input/input8
E: SUBSYSTEM=input
E: PRODUCT=10/1f/1/100
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PROP=0
E: EV=40001
E: SND=6
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: USEC_INITIALIZED=6517419
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_FOR_SEAT=input-platform-pcspkr
E: TAGS=:seat:
P: /devices/platform/pcspkr/input/input8/event8
N: input/event8
L: 0
S: input/by-path/platform-pcspkr-event-spkr
E: DEVPATH=/devices/platform/pcspkr/input/input8/event8
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: MAJOR=13
E: MINOR=72
E: USEC_INITIALIZED=6597348
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 10.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.19.0-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8), LANGUAGE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages xserver-xorg depends on:
ii x11-xkb-utils 7.7+4
ii xkb-data 2.26-2
ii xserver-xorg-core 2:1.20.4-1
ii xserver-xorg-input-all 1:7.7+19
ii xserver-xorg-input-libinput [xorg-driver-input] 0.28.2-2
ii xserver-xorg-input-wacom [xorg-driver-input] 0.34.99.1-1
ii xserver-xorg-video-all 1:7.7+19
ii xserver-xorg-video-amdgpu [xorg-driver-video] 18.1.99+git20190207-1
ii xserver-xorg-video-ati [xorg-driver-video] 1:19.0.1-1
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.5.0-1
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.16-1
ii xserver-xorg-video-qxl [xorg-driver-video] 0.1.5-2+b1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:19.0.1-1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.4.0-1
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.3.0-2
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 18.3.6-2
ii xserver-xorg-legacy 2:1.20.4-1
xserver-xorg suggests no packages.
-- no debconf information
Reply to: