Bug#930622: xserver-xorg-video-intel: sddm doesn't start. (EE) Failed to open authorization file
Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20180925-2
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Fresh install with mkfs of the whole disk. After reboot sddm doesn't start.
/var/log/Xorg.0.log has this:
[ 386.006] (EE) Failed to open authorization file "/var/run/sddm/{ba05762d-7748-49d6-8c98-e004168b4901}": No such file or directory
But
ls -l /var/run/sddm
total 4
-rw------- 1 sddm sddm 51 Jun 16 12:47 {ba05762d-7748-49d6-8c98-e004168b4901}
* What exactly did you do (or not do) that was effective (or
ineffective)?
Switching between F7 (the X session that doesn't work) and F1 works, but
going back to F7 encounters the same non-working sddm. Moving the cursor
makes the blining screen stop blinking but then it remains white. Clicking
any mouse button anywhere has no effect.
* What outcome did you expect instead?
That sddm would start and the login screen would show. Incidentally,
Debian 8 used to work just fine on this computer.
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.19.0-5-686-pae (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #1 SMP Debian 4.19.37-3 (2019-05-15)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 18637 Jun 16 12:48 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 385.366] (--) Log file renamed from "/var/log/Xorg.pid-1388.log" to "/var/log/Xorg.0.log"
[ 385.367]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 385.368] Build Operating System: Linux 4.9.0-8-amd64 i686 Debian
[ 385.368] Current Operating System: Linux debian 4.19.0-5-686-pae #1 SMP Debian 4.19.37-3 (2019-05-15) i686
[ 385.368] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-686-pae root=UUID=2ad355d8-a502-4ac8-acc3-f6ff0e2b3ff5 ro quiet
[ 385.368] Build Date: 05 March 2019 08:11:12PM
[ 385.368] xorg-server 2:1.20.4-1 (https://www.debian.org/support)
[ 385.368] Current version of pixman: 0.36.0
[ 385.368] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 385.368] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 385.368] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 16 12:47:48 2019
[ 385.369] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 385.369] (==) No Layout section. Using the first Screen section.
[ 385.369] (==) No screen section available. Using defaults.
[ 385.370] (**) |-->Screen "Default Screen Section" (0)
[ 385.370] (**) | |-->Monitor "<default monitor>"
[ 385.370] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 385.370] (==) Automatically adding devices
[ 385.370] (==) Automatically enabling devices
[ 385.370] (==) Automatically adding GPU devices
[ 385.370] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 385.371] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 385.371] Entry deleted from font path.
[ 385.371] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 385.371] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 385.371] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 385.371] (II) Loader magic: 0x771740
[ 385.371] (II) Module ABI versions:
[ 385.371] X.Org ANSI C Emulation: 0.4
[ 385.371] X.Org Video Driver: 24.0
[ 385.371] X.Org XInput driver : 24.1
[ 385.371] X.Org Server Extension : 10.0
[ 385.375] (++) using VT number 7
[ 385.375] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 385.377] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 385.384] (--) PCI:*(0@0:2:0) 8086:2562:1028:0160 rev 1, Mem @ 0xe8000000/134217728, 0xfeb80000/524288, BIOS @ 0x????????/131072
[ 385.384] (II) LoadModule: "glx"
[ 385.384] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 385.388] (II) Module glx: vendor="X.Org Foundation"
[ 385.388] compiled for 1.20.4, module version = 1.0.0
[ 385.388] ABI class: X.Org Server Extension, version 10.0
[ 385.388] (==) Matched intel as autoconfigured driver 0
[ 385.389] (==) Matched modesetting as autoconfigured driver 1
[ 385.389] (==) Matched fbdev as autoconfigured driver 2
[ 385.389] (==) Matched vesa as autoconfigured driver 3
[ 385.389] (==) Assigned the driver to the xf86ConfigLayout
[ 385.389] (II) LoadModule: "intel"
[ 385.389] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 385.390] (II) Module intel: vendor="X.Org Foundation"
[ 385.390] compiled for 1.20.1, module version = 2.99.917
[ 385.390] Module class: X.Org Video Driver
[ 385.390] ABI class: X.Org Video Driver, version 24.0
[ 385.390] (II) LoadModule: "modesetting"
[ 385.391] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 385.391] (II) Module modesetting: vendor="X.Org Foundation"
[ 385.391] compiled for 1.20.4, module version = 1.20.4
[ 385.391] Module class: X.Org Video Driver
[ 385.391] ABI class: X.Org Video Driver, version 24.0
[ 385.391] (II) LoadModule: "fbdev"
[ 385.392] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 385.392] (II) Module fbdev: vendor="X.Org Foundation"
[ 385.392] compiled for 1.20.0, module version = 0.5.0
[ 385.392] Module class: X.Org Video Driver
[ 385.392] ABI class: X.Org Video Driver, version 24.0
[ 385.392] (II) LoadModule: "vesa"
[ 385.393] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 385.394] (II) Module vesa: vendor="X.Org Foundation"
[ 385.394] compiled for 1.20.1, module version = 2.4.0
[ 385.394] Module class: X.Org Video Driver
[ 385.394] ABI class: X.Org Video Driver, version 24.0
[ 385.394] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 385.396] (II) intel: Driver for Intel(R) HD Graphics
[ 385.396] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 385.396] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 385.396] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 385.396] (II) FBDEV: driver for framebuffer: fbdev
[ 385.396] (II) VESA: driver for VESA chipsets: vesa
[ 385.420] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719
[ 385.420] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20180925-2 (Andreas Boll <aboll@debian.org>)
[ 385.420] (II) intel(0): SNA compiled for use with valgrind
[ 385.420] (WW) Falling back to old probe method for modesetting
[ 385.420] (WW) Falling back to old probe method for fbdev
[ 385.420] (II) Loading sub module "fbdevhw"
[ 385.420] (II) LoadModule: "fbdevhw"
[ 385.421] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 385.421] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 385.421] compiled for 1.20.4, module version = 0.0.2
[ 385.421] ABI class: X.Org Video Driver, version 24.0
[ 385.423] (--) intel(0): Integrated Graphics Chipset: Intel(R) 845G
[ 385.423] (--) intel(0): CPU: x86, sse2; using a maximum of 1 threads
[ 385.424] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 385.424] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 385.424] (==) intel(0): RGB weight 888
[ 385.424] (==) intel(0): Default visual is TrueColor
[ 385.425] (II) intel(0): Output VGA1 has no monitor section
[ 385.432] (II) intel(0): Enabled output VGA1
[ 385.432] (--) intel(0): Using a maximum size of 64x64 for hardware cursors
[ 385.432] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 385.432] (II) intel(0): Enabled output VIRTUAL1
[ 385.432] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 0
[ 385.433] (==) intel(0): TearFree disabled
[ 385.433] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 385.433] (==) intel(0): DPI set to (96, 96)
[ 385.433] (II) Loading sub module "dri3"
[ 385.433] (II) LoadModule: "dri3"
[ 385.433] (II) Module "dri3" already built-in
[ 385.433] (II) Loading sub module "dri2"
[ 385.435] (II) LoadModule: "dri2"
[ 385.435] (II) Module "dri2" already built-in
[ 385.435] (II) Loading sub module "present"
[ 385.435] (II) LoadModule: "present"
[ 385.435] (II) Module "present" already built-in
[ 385.435] (II) UnloadModule: "modesetting"
[ 385.435] (II) Unloading modesetting
[ 385.435] (II) UnloadModule: "fbdev"
[ 385.435] (II) Unloading fbdev
[ 385.435] (II) UnloadSubModule: "fbdevhw"
[ 385.436] (II) Unloading fbdevhw
[ 385.436] (II) UnloadModule: "vesa"
[ 385.436] (II) Unloading vesa
[ 385.436] (II) intel(0): SNA initialized with Almador (gen2) backend
[ 385.436] (==) intel(0): Backing store enabled
[ 385.436] (==) intel(0): Silken mouse enabled
[ 385.436] (II) intel(0): HW Cursor enabled
[ 385.437] (==) intel(0): DPMS enabled
[ 385.452] (==) intel(0): Display hotplug detection enabled
[ 385.452] (II) intel(0): [DRI2] Setup complete
[ 385.452] (II) intel(0): [DRI2] DRI driver: i915
[ 385.452] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 385.452] (II) intel(0): direct rendering: DRI2 enabled
[ 385.452] (II) intel(0): hardware support for Present enabled
[ 385.452] (II) Initializing extension Generic Event Extension
[ 385.459] (II) Initializing extension SHAPE
[ 385.460] (II) Initializing extension MIT-SHM
[ 385.460] (II) Initializing extension XInputExtension
[ 385.461] (II) Initializing extension XTEST
[ 385.470] (II) Initializing extension BIG-REQUESTS
[ 385.470] (II) Initializing extension SYNC
[ 385.471] (II) Initializing extension XKEYBOARD
[ 385.471] (II) Initializing extension XC-MISC
[ 385.472] (II) Initializing extension SECURITY
[ 385.472] (II) Initializing extension XFIXES
[ 385.473] (II) Initializing extension RENDER
[ 385.480] (II) Initializing extension RANDR
[ 385.481] (II) Initializing extension COMPOSITE
[ 385.482] (II) Initializing extension DAMAGE
[ 385.482] (II) Initializing extension MIT-SCREEN-SAVER
[ 385.483] (II) Initializing extension DOUBLE-BUFFER
[ 385.483] (II) Initializing extension RECORD
[ 385.484] (II) Initializing extension DPMS
[ 385.484] (II) Initializing extension Present
[ 385.485] (II) Initializing extension DRI3
[ 385.485] (II) Initializing extension X-Resource
[ 385.485] (II) Initializing extension XVideo
[ 385.486] (II) Initializing extension XVideo-MotionCompensation
[ 385.486] (II) Initializing extension SELinux
[ 385.486] (II) SELinux: Disabled on system
[ 385.486] (II) Initializing extension GLX
[ 385.503] (II) AIGLX: Loaded and initialized i915
[ 385.503] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 385.503] (II) Initializing extension XFree86-VidModeExtension
[ 385.503] (II) Initializing extension XFree86-DGA
[ 385.504] (II) Initializing extension XFree86-DRI
[ 385.504] (II) Initializing extension DRI2
[ 385.530] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 385.545] (II) intel(0): Setting screen physical size to 338 x 270
[ 385.670] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 385.671] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 385.671] (II) LoadModule: "libinput"
[ 385.671] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 385.904] (II) Module libinput: vendor="X.Org Foundation"
[ 385.904] compiled for 1.20.4, module version = 0.28.2
[ 385.904] Module class: X.Org XInput Driver
[ 385.904] ABI class: X.Org XInput driver, version 24.1
[ 385.904] (II) Using input driver 'libinput' for 'Power Button'
[ 385.904] (**) Power Button: always reports core events
[ 385.904] (**) Option "Device" "/dev/input/event2"
[ 385.904] (**) Option "_source" "server/udev"
[ 385.911] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 385.911] (II) event2 - Power Button: device is a keyboard
[ 385.912] (II) event2 - Power Button: device removed
[ 385.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 385.913] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 385.913] (**) Option "xkb_model" "pc105"
[ 385.913] (**) Option "xkb_layout" "us"
[ 385.916] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 385.916] (II) event2 - Power Button: device is a keyboard
[ 385.919] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 385.919] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 385.919] (II) Using input driver 'libinput' for 'Power Button'
[ 385.919] (**) Power Button: always reports core events
[ 385.919] (**) Option "Device" "/dev/input/event1"
[ 385.919] (**) Option "_source" "server/udev"
[ 385.922] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 385.922] (II) event1 - Power Button: device is a keyboard
[ 385.922] (II) event1 - Power Button: device removed
[ 385.923] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 385.923] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 385.923] (**) Option "xkb_model" "pc105"
[ 385.923] (**) Option "xkb_layout" "us"
[ 385.926] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 385.926] (II) event1 - Power Button: device is a keyboard
[ 385.931] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[ 385.931] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 385.931] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 385.931] (**) Logitech USB Optical Mouse: always reports core events
[ 385.931] (**) Option "Device" "/dev/input/event3"
[ 385.931] (**) Option "_source" "server/udev"
[ 385.937] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 385.937] (II) event3 - Logitech USB Optical Mouse: device set to 1000 DPI
[ 385.937] (II) event3 - Logitech USB Optical Mouse: device is a pointer
[ 385.938] (II) event3 - Logitech USB Optical Mouse: device removed
[ 385.938] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input3/event3"
[ 385.938] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 385.938] (**) Option "AccelerationScheme" "none"
[ 385.938] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 385.938] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 385.938] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 385.944] (II) event3 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 385.944] (II) event3 - Logitech USB Optical Mouse: device set to 1000 DPI
[ 385.944] (II) event3 - Logitech USB Optical Mouse: device is a pointer
[ 385.947] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 385.947] (II) No input driver specified, ignoring this device.
[ 385.947] (II) This device may have been added with another device file.
[ 385.950] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 385.950] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 385.950] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 385.950] (**) AT Translated Set 2 keyboard: always reports core events
[ 385.950] (**) Option "Device" "/dev/input/event0"
[ 385.950] (**) Option "_source" "server/udev"
[ 385.955] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 385.955] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 385.956] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 385.956] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 385.956] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 385.957] (**) Option "xkb_model" "pc105"
[ 385.957] (**) Option "xkb_layout" "us"
[ 385.961] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 385.962] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 385.965] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 385.965] (II) No input driver specified, ignoring this device.
[ 385.965] (II) This device may have been added with another device file.
[ 386.006] (EE) Failed to open authorization file "/var/run/sddm/{ba05762d-7748-49d6-8c98-e004168b4901}": No such file or directory
[ 387.458] (II) intel(0): EDID vendor "ACR", prod id 25
[ 387.459] (II) intel(0): Using EDID range info for horizontal sync
[ 387.459] (II) intel(0): Using EDID range info for vertical refresh
[ 387.459] (II) intel(0): Printing DDC gathered Modelines:
[ 387.459] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 387.459] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 387.459] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 387.459] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 387.459] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 387.459] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 387.459] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 387.459] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 387.459] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 387.459] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 387.459] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 387.459] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 387.459] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 387.459] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 387.459] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 387.459] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 398.106] (II) event2 - Power Button: device removed
[ 398.107] (II) event1 - Power Button: device removed
[ 398.109] (II) event3 - Logitech USB Optical Mouse: device removed
[ 398.111] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 398.112] (II) AIGLX: Suspending AIGLX clients for VT switch
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PROP=0
E: EV=3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=4928022
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: MAJOR=13
E: MINOR=66
E: USEC_INITIALIZED=26838259
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PROP=0
E: EV=3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=4926662
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
N: input/event1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: MAJOR=13
E: MINOR=65
E: USEC_INITIALIZED=26841114
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input3
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input3
E: SUBSYSTEM=input
E: PRODUCT=3/46d/c05a/111
E: NAME="Logitech USB Optical Mouse"
E: PHYS="usb-0000:00:1d.1-2/input0"
E: UNIQ=""
E: PROP=0
E: EV=17
E: KEY=ff0000 0 0 0 0 0 0 0 0
E: REL=143
E: MSC=10
E: MODALIAS=input:b0003v046DpC05Ae0111-e0,1,2,4,k110,111,112,113,114,115,116,117,r0,1,6,8,am4,lsfw
E: USEC_INITIALIZED=5937355
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05a
E: ID_REVISION=5400
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.1-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_2_1_0
E: ID_FOR_SEAT=input-pci-0000_00_1d_1-usb-0_2_1_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input3/event3
N: input/event3
L: 0
S: input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse
S: input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: MAJOR=13
E: MINOR=67
E: USEC_INITIALIZED=26839976
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05a
E: ID_REVISION=5400
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.1-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_2_1_0
E: MOUSE_DPI=1000@125
E: LIBINPUT_DEVICE_GROUP=3/46d/c05a:usb-0000:00:1d.1-2
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
P: /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input3/mouse0
N: input/mouse0
L: 0
S: input/by-id/usb-Logitech_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0001/input/input3/mouse0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: MAJOR=13
E: MINOR=32
E: USEC_INITIALIZED=25175903
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05a
E: ID_REVISION=5400
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.1-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_2_1_0
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse
P: /devices/platform/i8042/serio0/input/input0
L: 0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: SUBSYSTEM=input
E: PRODUCT=11/1/1/ab41
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PROP=0
E: EV=120013
E: KEY=1100f 2902000 8380307c f910f001 feffffdf ffefffff ffffffff fffffffe
E: MSC=10
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw
E: USEC_INITIALIZED=4834630
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: TAGS=:seat:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
L: 0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: MAJOR=13
E: MINOR=64
E: USEC_INITIALIZED=26842271
E: KEYBOARD_KEY_81=playpause
E: KEYBOARD_KEY_82=stopcd
E: KEYBOARD_KEY_83=previoussong
E: KEYBOARD_KEY_84=nextsong
E: KEYBOARD_KEY_85=brightnessdown
E: KEYBOARD_KEY_86=brightnessup
E: KEYBOARD_KEY_87=battery
E: KEYBOARD_KEY_88=unknown
E: KEYBOARD_KEY_89=ejectclosecd
E: KEYBOARD_KEY_8a=suspend
E: KEYBOARD_KEY_8b=switchvideomode
E: KEYBOARD_KEY_8c=unknown
E: KEYBOARD_KEY_8f=switchvideomode
E: KEYBOARD_KEY_90=previoussong
E: KEYBOARD_KEY_91=prog1
E: KEYBOARD_KEY_92=media
E: KEYBOARD_KEY_93=unknown
E: KEYBOARD_KEY_95=camera
E: KEYBOARD_KEY_97=email
E: KEYBOARD_KEY_98=f21
E: KEYBOARD_KEY_99=nextsong
E: KEYBOARD_KEY_9a=setup
E: KEYBOARD_KEY_9b=switchvideomode
E: KEYBOARD_KEY_9e=f21
E: KEYBOARD_KEY_a2=playpause
E: KEYBOARD_KEY_a4=stopcd
E: KEYBOARD_KEY_d8=screenlock
E: KEYBOARD_KEY_d9=f21
E: KEYBOARD_KEY_ed=media
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: TAGS=:power-switch:
P: /devices/platform/pcspkr/input/input4
L: 0
E: DEVPATH=/devices/platform/pcspkr/input/input4
E: SUBSYSTEM=input
E: PRODUCT=10/1f/1/100
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PROP=0
E: EV=40001
E: SND=6
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: USEC_INITIALIZED=24326742
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_FOR_SEAT=input-platform-pcspkr
E: TAGS=:seat:
P: /devices/platform/pcspkr/input/input4/event4
N: input/event4
L: 0
S: input/by-path/platform-pcspkr-event-spkr
E: DEVPATH=/devices/platform/pcspkr/input/input4/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: MAJOR=13
E: MINOR=68
E: USEC_INITIALIZED=26843919
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 10.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 4.19.0-5-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.28-10
ii libdrm-intel1 2.4.97-1
ii libdrm2 2.4.97-1
ii libpciaccess0 0.14-1
ii libpixman-1-0 0.36.0-1
ii libudev1 241-5
ii libx11-6 2:1.6.7-1
ii libx11-xcb1 2:1.6.7-1
ii libxcb-dri2-0 1.13.1-2
ii libxcb-dri3-0 1.13.1-2
ii libxcb-sync1 1.13.1-2
ii libxcb-util0 0.3.8-3+b2
ii libxcb1 1.13.1-2
ii libxcursor1 1:1.1.15-2
ii libxdamage1 1:1.1.4-3+b3
ii libxext6 2:1.3.3-1+b2
ii libxfixes3 1:5.0.3-1
ii libxinerama1 2:1.1.4-2
ii libxrandr2 2:1.5.1-1
ii libxrender1 1:0.9.10-1
ii libxshmfence1 1.3-1
ii libxss1 1:1.2.3-1
ii libxtst6 2:1.2.3-1
ii libxv1 2:1.0.11-1
ii libxvmc1 2:1.0.10-1
ii xserver-xorg-core [xorg-video-abi-24] 2:1.20.4-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: