-
8eb71d1e
by Derek Foreman
at 2018-04-09T18:13:40Z
configure.ac: Reopen master for regular development
-
61c4a730
by Derek Foreman
at 2018-04-09T21:13:09Z
configure.ac: Bump libweston version to match weston version
configure won't work if weston's version is higher than libweston's.
-
01f60211
by Pekka Paalanen
at 2018-04-10T11:31:05Z
libweston: introduce weston_head
In order to support clone modes, libweston needs the concept of a head
that is separate from weston_output. While weston_output manages buffers
and the repaint state machine, weston_head will represent a single
monitor. In the future it will be possible to have a single
weston_output drive one or more weston_heads for a clone mode that
shares the framebuffers between all cloned heads.
All the fields that are obviously properties of the monitor are moved
from weston_output into weston_head.
As moving the fields requires one to touch all the backends for all the
assingments, introduce setter functions for them while we are here. The
setters are identical to the old assignments, for now.
As a temporary measure, weston_output embeds a single head. Also the
ugly casts in weston_head_set_monitor_strings() will be removed by a
follow-up patch.
Libweston major version is bumped, because weston_output struct layout
is changed.
v7:
- Bump libweston major version.
v6:
- adapt to upstream changes in weston_output_set_transform()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
1b9bf598
by Pekka Paalanen
at 2018-04-10T11:33:59Z
libweston: move wl_output to weston_head
The wl_output protocol interface exposes things like monitor make,
model, sub-pixel layout and physical dimensions. Obviously wl_output is
meant to represent a monitor.
The abstraction of a monitor is weston_head. Therefore move the wl_output
global and the bound resources list into weston_head.
When clone mode gets implemented in the future, this means that monitors
driven by the same CRTC will still be represented as separate wl_output
globals. This allows to accurately represent the hardware.
Clone mode that used separate, not frame-locked, CRTCs to drive two
monitors as clones would necessarily also be exposed as separate
wl_output since they have different timings.
v6:
- adapt to upstream changes in weston_output_set_transform()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
0534762b
by Pekka Paalanen
at 2018-04-10T11:33:59Z
libweston: use head in wl_output global
As a wl_output represents weston_head, use a weston_head pointer as the
wl_output global's user data.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
055c1137
by Pekka Paalanen
at 2018-04-10T11:33:59Z
libweston: make wl_output point to weston_head
The user data of a wl_resource representing a wl_output protocol object
used to be a pointer to weston_output. Now that weston_output is being
split, wl_output more accurately refers to weston_head which is a single
monitor.
Change the wl_output user data to point to weston_head.
weston_output_from_resource() is replaced with
weston_head_from_resource().
This change is not strictly necessary, but architecturally it is the
right thing to do. In the future there might appear the need to refer to
a specific head of a cloned pair, for instance.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
6528c038
by Pekka Paalanen
at 2018-04-10T11:33:59Z
libweston: refactor weston_mode_switch_finish
Split out a new function. This is a pure refactoring, no change in
behaviour.
This helps a following patch that adds a loop over output->head_list.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
7cdbabee
by Pekka Paalanen
at 2018-04-12T11:13:06Z
libweston: introduce weston_output::head_list
The intention is that in the future backends will dynamically allocate
weston_heads based on the resources they have. The lifetime of a
weston_head will be independent of the lifetime of a weston_output it
may be attached to. Backends allocate objects derived from weston_head,
like they currently do for weston_output. Backend will choose when to
destroy a weston_head.
For clone mode, struct weston_output gains head_list member, which is
the list of attached heads that will all show the same framebuffer.
Since heads are growing out of weston_output, management functions are
added.
Detaching a head from an enabled output is allowed to accommodate
disappearing heads. Attaching a head to an enabled output is disallowed
because it may need hardware reconfiguration and testing, and so
requires a weston_output_enable() call.
As a temporary measure, we have one weston_head embedded in
weston_output, so that backends can be migrated individually to the new
allocation scheme.
v8:
- Do not send wp_presentation_feedback.sync_output events for multiple
wl_output globals in weston_presentation_feedback_present().
v6:
- adapt to upstream changes in weston_output_set_transform()
- use wl_list_for_each_safe in weston_output_release()
- removed weston_output_get_first_head() as it's not needed yet
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v7 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
d9dcc6dc
by Pekka Paalanen
at 2018-04-12T11:26:17Z
libweston: properly orphan wl_output resources
Remove the wl_resource in the head's resource list when we are
removing the wl_output global. We sent global removal events to clients,
the resources should become dummies until clients reap them. Reset user
data so that clients triying to use dummy objects don't hit e.g. a freed
head pointer.
This fixes a theoretical issue: if an enabled output is disabled and
then gets enabled again, mode changes and wl_surface.enter/leave would
still attempt to use the dummy objects. If a client destroyed a dummy
object, we don't have the destructor to remove it from the resource
list, and libweston would hit freed memory.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
06f99efc
by Pekka Paalanen
at 2018-04-12T11:26:17Z
libweston: strdup head make, model, serial_number
Duplicate these strings to decouple their lifetime from whatever the
backends used. This should prevent hard to catch use after frees and
such problems in the future.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v5 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
cf0a476b
by Pekka Paalanen
at 2018-04-12T11:26:17Z
cms-colord: find a good head
The 'head' member of 'struct weston_output' is going to go unused and
then disappear, so stop using it and find a head from the proper list.
However, this leaves a problem in cms-colord: if you have multiple
monitors driver with the same CRTC, what do you say to the color
management system? The monitors could be different, but all the color
LUTs etc. are in the CRTC and are shared, as is the framebuffer.
Do the simple hack here and just use whatever head happens to be the
first in the list.
The warning is printed in get_output_id(), because if heads are added or
removed while the output is enabled, the id could change.
v6:
- add weston_output_get_first_head(), at first use
- add warning message for nr. heads > 1
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
9b02e478
by Pekka Paalanen
at 2018-04-12T11:26:17Z
libweston: add name to weston_head
Heads need to be named, so they can be referenced in logs and
configuration sources.
When clone mode is implemented, output and head names may differ.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
7fe858be
by Pekka Paalanen
at 2018-04-12T11:26:17Z
libweston: add weston_head::connected
Heads may be disconnected or connected and the compositor needs to be
able to know the state to know which heads to take into use.
Currently a single head is automatically created with an output, and
outputs are only ever created as connected and destroyed on
disconnection, so it suffices to set connected to true. In the future,
backends are expected to create heads for both connected and
disconnected connectors, so that a connector can be forced on without it
being actually connected.
v6:
- split weston_head_is_enabled() to a new patch
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
8e552fd3
by Pekka Paalanen
at 2018-04-12T11:26:17Z
libweston: add weston_head_is_enabled()
Enabled is orthogonal from connected. A connected head could be
disabled, or a disconnected head could in the future be enabled.
Compositors quite likely want to check if a head is already enabled
before starting to take it into use.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
1adcbacd
by Pekka Paalanen
at 2018-04-12T11:26:17Z
libweston: add compositor list of heads
weston_compositor needs to maintain a list of all available heads, so
that a compositor can pick and choose which heads to take into or out of
use at arbitrary times. The heads may be on or off, and connected or
disconnected.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
37e6c9e5
by Pekka Paalanen
at 2018-04-12T12:12:39Z
libweston: add heads_changed_signal
Add a hook for compositors to get a callback when heads are added or
their connection status changes, to which compositors likely want to
react to by enabling or disabling outputs (API for that to be added
later).
As many head changes as possible should be coalesced into a single
heads_changed call. Therefore the callback is made from an idle task.
This anticipates a future atomic output configuration API, where the
global output configuration is tested and set atomically instead of one
by one.
weston_pending_output_coldplug() needs to manually execute the
heads_changed call so that initial outputs are created before any
plugins get their start-up idle tasks ran. This is especially important
for ivi-shell which does not support output hotplug, and for tests to
guarantee the expected outputs.
v8:
- Change the callback function pointer into a wl_signal. The API is
changed and renamed.
v6:
- fix a typo
- add comment in weston_pending_output_coldplug()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
992a8cb3
by Pekka Paalanen
at 2018-04-17T12:18:43Z
libweston: new head-based output management API
Introduce the API for users (compositors) to create an output from a
head, attach and detach heads, and destroy outputs created this way.
This also adds the backend-facing API to libweston.
In the new API design, a backend creates heads, and the compositor
chooses one or more heads (clone mode) to be driven by an output.
In the future backends will be converted to not create outputs directly
but only in the new create_output hook.
The user subscribes to a heads_changed hook and arranges heads into
outputs from there.
Adding the API this way will allow frontends (main.c) and backends to be
converted one by one. This adds compatiblity paths in
weston_compositor_create_output_with_head() and weston_output_destroy()
so that frontends can be converted first to call these, and then
backends can be converted one by one to the new design. Afterwards, the
compatibility paths will be removed along with weston_output::head.
Currently heads can be added to a disabled output only. This is less
than ideal for clone mode hotplug and should be improved on later.
v4: Remove the wl_output global on head detach if output is enabled.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
2e1bedb4
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: add weston_head destroy signal
Add support for subscribing to weston_head destruction.
The primary use case for heads being destroyed arbitrarily is the
DRM-backend with MST connectors, which may disappear on unplug. It is
not just the connector becoming disconnected, it is the connector
actually disappearing.
The compositor needs to know about disappearing heads so that it has a
chance to clean up "orphaned" outputs which do get disabled but still
need destroying at run time. Shutdown would destroy them as well.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
e19970fd
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: add weston_head_is_device_changed() API
Reacting to DRM hotplug events is racy. It is theoretically possible to
get hotplug events for a quick swap from one monitor to another and
process both only after the new monitor is connected. Hence it is
possible for display device information to change without going through
a disconnected state for the head.
To support such cases, add API to allow detecting it in the compositor.
v6:
- change str_null_neq() to str_null_eq()
- rename weston_head_condition_device_changed()
- move the condition from weston_head_set_device_changed() to the
callers
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
3717e639
by Pekka Paalanen
at 2018-04-17T12:19:57Z
weston: move weston_output_enable() into callers
Move the call out of wet_configure_windowed_output_from_config() and
into its callers.
This allows to migrate each frontend one by one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
cd8a1a81
by Pekka Paalanen
at 2018-04-17T12:19:57Z
weston: migrate headless to head-based output API
Migrate the headless frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
The simple_heads_changed() function is written to be able to cater for
all backends. The rest will be migrated individually.
The head destroy listeners are not exactly necessary, for headless
anyway, but this is an example excercising the API. Also
is_device_changed() check is mostly useful with DRM.
v8:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- fix comment on wet_head_tracker_create()
v3: Print "Detected a monitor change" only for enabled heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
30465bdc
by Pekka Paalanen
at 2018-04-17T12:19:57Z
weston: migrate x11 to head-based output API
Migrate the x11 frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
46e2f024
by Pekka Paalanen
at 2018-04-17T12:19:57Z
weston: migrate wayland to head-based output API
Migrate the Wayland frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
33961bd7
by Pekka Paalanen
at 2018-04-17T12:19:57Z
weston: migrate fbdev to head-based output API
Migrate the fbdev frontend to use the new head-based output
configuration API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_fbdev_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
63d58390
by Pekka Paalanen
at 2018-04-17T12:19:57Z
weston: migrate RDP to head-based output API
Migrate the RDP frontend to use the new head-based output configuration
API: listen for heads_changed, and process all heads.
v7:
- remove unnecessary 'goto out' in load_rdp_backend()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
1394ac30
by Pekka Paalanen
at 2018-04-17T12:19:57Z
weston: migrate DRM to head-based output API
Migrate the DRM frontend to use the simple head-based output
configurator, maintaining the exact same features and semantics as
before.
This is an intermediate step. It is unoptimal to create a weston_output
just to turn it off, but the libweston implementation and the DRM
backend require it for now. In the future, the DRM frontend will get its
own configurator that does not create useless weston_outputs and
supports clone mode by attaching multiple heads to the same
weston_output. Clone mode is not yet supported by libweston/DRM.
Until we remove the need to create a weston_output just to turn it
"off", that is, disable it, we will hit simple_head_enable() for heads
we have already disabled. As long as the DRM-backend conversion to the
head-based API is not complete, attempting to create an output for a
head again would lead to a crash. This problem does not exist right now,
but it will after the patch "compositor-drm: start migration to
head-based output API". Therefore, check if the head we are about to
process is already attached, and do nothing if so. DRM outputs set to
"off" are the only ones legitimately hitting this condition.
This is the last frontend migrated, wet_set_pending_output_handler() is
deleted as dead code.
v9:
- Add the workaround in simple_head_enable().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v6 Reviewed-by: Ian Ray <ian.ray@ge.com>
v7 Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
e868c3fc
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: change windowed_output_api output_create to create_head
Rename the function pointer to create_head() because that is what it
does on backends that are converted to the head-based API. Update the
documentation to match.
Surprisingly this is not an ABI break, as the function behaviour and
signature remain intact. Hence API_NAME is not bumped.
This is only an API break, and main.c is fixed accordingly.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
8a8dcac4
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: remove output_pending_signal
The signal has been replaced with the heads_changed hook and is no
longer useful.
weston_pending_output_coldplug() is renamed to
weston_compositor_flush_heads_changed() for two reasons: it better
describes what it does now, and it serves as an obvious flag that
libweston ABI has been broken.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
ddce54de
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: stop auto-adding the implicit head
All frontends have been converted to the new head-based output
management API, which means that
weston_compositor_create_output_with_head() is calling
weston_output_attach_head(). We will never hit the implicit attach
anymore.
Therefore we can now require that an output has at least one head when
calling weston_output_enable(). An output without heads is useless.
The auto-add code is removed as dead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
ec25b0a8
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: assert make/model in weston_output_enable()
Output make and model are not allowed to be NULL in the protocol, so
ensure they are not forgotten when enabling an output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
586e1ac7
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: assert current_mode in weston_output_enable()
The functions called here, particularly
weston_output_transform_scale_init(), rely on current mode being set.
The current mode must also be found in the mode list, though we don't
explicitly check it here.
current_mode not being set is a programmer error. It could be a backend
bug, but it could also be a libweston user bug not calling a set size
function.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
dcbcfc7f
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: cancel idle_repaint on output destroy
If the idle_repaint() callback has been scheduled when a weston_output
gets destroyed, the callback will hit use-after-free. I have encountered
this when migrating the wayland backend to the head-based API, using
--sprawl, and closing/disconnecting one of the parent compositor
outputs.
Store the idle_repaint callback source, and destroy it in
weston_output_release(), ensuring we don't get a stale call to
start_repaint_loop later.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
fd4c57cb
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-headless: migrate to head-based output API
Implement the head-based output API in this backend, and stop relying on
the implicit weston_output::head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
38864650
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-rdp: migrate to head-based output API
Follow the starndard patttern as the other backends, headless and x11 in
particular, to stop relying on the implicit weston_output::head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
55916d54
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-fbdev: make re-enable less drastic
Destroying the whole output in reenable would cause list walk
corruption: the loop over output_list in session_notify() is not using
wl_list_for_each_safe so output removal would break it.
Creating a new output is also problematic as it needs the compositor to
configure it, but that probably saved us from another list walk failure:
adding the new output to be list while walking the list, possibly
causing it to be destroyed and re-created ad infinitum.
Instead of a complete destroy/create cycle, just do our internal
disable/enable cycle. That will re-open the fbdev, re-read the
parameters, re-create hw_surface, and reinitialize the renderer output.
A problem with this is if fbdev_set_screen_info() fails. We do read the
new parameters, but we don't communicate them to libweston core or old
clients.
However, it is hard to care: to trigger this path, one needs to
VT-switch to another fbdev app which changes the fbdev parameters. That
is quite difficult as VT-switching has been broken for a good while for
fbdev-backend, at least with logind. Also fbdev_set_screen_info() would
have to fail before one should be able to tell something is wrong.
The real reason behind this patch, though, is the migration to the
head-based output API. Destroying and re-creating an output really does
not fit that design. Destroying and re-creating a head would be better,
but again not testable in the current state.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
23058122
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-fbdev: migrate to head-based output API
Implement the head-based output API in this backend, and stop relying on
the implicit weston_output::head.
The split between fbdev_head and fbdev_output is somewhat arbitrary.
There is no hotplug or unplug, and there is always 1:1 relationship.
Struct fbdev_screeninfo could have been split as well, but it would not
have made much difference.
I chose fbdev_output to carry the mmap details (buffer_length is now
duplicated here), and fbdev_head to carry the display parameters and
device node path. The device node identifies the head, similar to a
connector.
The backend init creates a head. The compositor uses it to create an
output. Libweston core attaches the head automatically after creating
the output. The attach hook is a suitable place to set up the video
modes on the output as they are dictated by the head, it would be too
late at enable() time.
v7:
- use name argument instead of hardcoded "fbdev" in
fbdev_output_create()
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
c900881e
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-x11: migrate to head-based output API
Follow the standard pattern set by the headless backend which also uses
the the window output API.
Stops relying on the implicit weston_output::head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
39069fa2
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-wayland: strict surface create/destroy
Add safeguards to make it painfully obvious if we ever get the pairing
of wayland_backend_create_output_surface() and
wayland_backend_destroy_output_surface() wrong. Helps catching bugs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
c80e9541
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-wayland: migrate to head-based output API
Follow the standard pattern used in the headless and x11 backend
migration, but also cater for the two other backend modes: --sprawl or
fullscreen-shell, and --fullscreen.
Stops relying on the implicit weston_output::head.
Unlike other backends, this uses the attach_head hook to do the
required head setup that is not possible to do without an output, but
must be done before weston_output_enable(). This also requires the
detach_head hook for the one case where the user attaches a --fullscreen
head and then detaches it without enabling the output.
It is a little awkward to fully initialize heads as late as attach, but
aside from the --sprawl/fullscreen-shell case, there is not really a way
to know the head properties without creating the parent wl_surface and
configuring it.
Heads/outputs created for parent outputs now have distinct names instead
of all being called "wlparent".
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
c112f00b
by Pekka Paalanen
at 2018-04-17T12:19:57Z
compositor-drm: start migration to head-based output API
Hook up the libweston facing head-based output API by introducing struct
drm_head, but leave it as a fake so that members can be migrated in
pieces in follow-up patches.
The DRM backend continues to create an output for each connected
connector only, and during output creation it also creates a drm_head
for it. This allows it to pretend it supports the head-based output API
as long as there is only one head per output ever attached.
create_output callback is fake, it will only look up the existing
drm_output by the head name.
Clones are not yet supported, hence max is defined to 1.
This unfortunately introduces some temporary code that will be revomed
later, but seems to be necessary to avoid a single big patch.
v6:
- add missing drm_head_destroy() call
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
42c0e148
by Pekka Paalanen
at 2018-04-17T12:19:57Z
libweston: remove weston_output::head
Remove the scaffolding that allowed backends to be converted one by one
to the head-based API. Nothing is using these members anymore.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
3e8f2018
by Pekka Paalanen
at 2018-04-17T12:57:41Z
libweston: print head names on output enable
This will be interesting to see when testing clone mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
1ae9d084
by Pekka Paalanen
at 2018-04-17T12:57:41Z
libweston: create/find output by name
To let users pick an arbitrary name for an output, to be used as e.g. a
configuration key, add API to create an output with a given name. For
the same configuration purpose, add a search function as well.
For the search function to be predictable, forbid creating multiple
outputs with the same name. Previously, creating multiple outputs with
the same name would have needed detatching to create outputs from the
same head, now that is forbidden.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
37b7c6eb
by Pekka Paalanen
at 2018-04-17T12:57:41Z
libweston: support user data on weston_output
Support attaching custom data to a weston_output by the traditional
destroy listener / wl_signal_get approach.
Needs a new destroy signal, because user data lifetime should be the
lifetime of the weston_output regradless of its enabled status. The old
destroy signal is for output consumers that only care about enabled
outputs in the system and gets emitted on disable, not on destroy.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
dcac351d
by Pekka Paalanen
at 2018-04-17T12:57:41Z
libweston: allow attaching heads to enabled outputs
Move the responsibility of ensuring the head will work in the enabled
output to the backends.
A compositor cannot enable an output without heads, and removing the
last head from an output automatically disables the output, so attaching
a new head to an enabled output is only possible for clone mode.
Backends headless, rdp, and x11 forbid clone mode by not having an
attach_head hook implemented; fbdev and wayland explicitly deny clone
mode. Only the DRM backend is affected by this change and even that not
yet because MAX_CLONED_CONNECTORS is 1 in the DRM backend.
Also ensure a global is created for the head when attached to an enabled
output, and log it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
a010699d
by Pekka Paalanen
at 2018-04-17T12:57:41Z
libweston: log head detach on enabled output
Helps debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
54cc47cf
by Pekka Paalanen
at 2018-04-17T12:57:41Z
compositor-drm: drm_output_find_by_connector from head_list
Switch drm_output_find_by_connector() to search for the output by
iterating the compositor's head_list. drm_head_find_by_connector() will
be useful later on its own.
As of "compositor-drm: start migration to head-based output API" the
head list is guaranteed to contain all created drm_outputs through the
automatically created drm_head.
This simplifies the code a little, introduces
drm_head_find_by_connector(), and works towards the eventual removal of
drm_output_find_by_connector().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
aeca2b5a
by Pekka Paalanen
at 2018-04-17T12:57:41Z
compositor-drm: use head_find_by_connector in update_unused_outputs
Making this function not depend on drm_head::output field through
drm_output_find_by_connector() will later allow to remove the
drm_head::output field before removing the unused_connectors array. This
helps keeping the commit more fine-grained.
drm_backend_update_unused_outputs() was only interested in enabled
outputs. The new code is 100% equivalent to the old code. The
difference is that weston_head::output is only set for attached heads. A
connector cannot be in use if it is not attached to an output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
a0a3746a
by Pekka Paalanen
at 2018-04-17T12:57:41Z
compositor-drm: find disconnects from head_list
Instead of iterating output_list and pending_output_list, iterate
head_list to find outputs whose connectors have been disconnected.
This helps a following patch to move connector fields from drm_output to
drm_head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
ce72424d
by Pekka Paalanen
at 2018-04-17T12:57:41Z
compositor-drm: move backlight into drm_head
Backlight is driven per connector, hence it belongs in struct drm_head.
weston_output::set_backlight() API is remains per output so far. There
is no UI to control backlights per head and adding one would be
difficult for an output that has multiple cloned heads.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
c1e89ba2
by Pekka Paalanen
at 2018-04-18T08:44:30Z
compositor-drm: move connector fields into drm_head
Move the connector related fields from drm_output to the drm_head. A
drm_head represents a connector for now.
The code in drm_head_create() to update connector data, monitor
information, etc. is moved into a new function. This will be useful when
DRM-backend starts creating heads for all connectors regardless of their
connection status and will need to update them on hotplug events.
While incurring the churn to move several fields into struct drm_head,
also refactor out drm_head_assign_connector_info(). This function is
needed later when drm_heads will exist regardless of connected status,
as every hotplug event will need to update the state of all connectors.
At that point we will also start handling connector changes that do not
go through an intermediate disconnected state. This refactoring is
trivial enough to be in this patch to reduce the total amount of changes
to be reviewed.
v6:
- adapt to the new places of updating unused_connectors
- free connector in create_output_for_connector() error path
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
663d5e9b
by Pekka Paalanen
at 2018-04-18T08:53:54Z
compositor-drm: allocate CRTC on enable()
A drm_output needs a CRTC only when it is in use. Allocating a CRTC on
creation of drm_output will reserve the CRTC regardless of whether the
output is actually used or not. This may cause creating other
drm_outputs to fail if there are not enough CRTCs.
Instead, allocate the CRTC on drm_output enable() time. A drm_output
will have a valid CRTC only while it is enabled.
This allows us to create drm_output objects arbitrarily and without a
head assignment, which is required by the head-based output API for the
backends. The assigned heads will be known only at enable() time.
Now drm_output_enable() has to call drmModeGetResources() to be able to
find a suitable CRTC. We might want to cache the resources somewhere,
but that is it topic for another patch.
v4: Force resetting unused CRTCs on fini.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
9790f875
by Pekka Paalanen
at 2018-04-18T08:53:54Z
compositor-drm: simplify drm_output_find_by_crtc()
As CRTC is allocated on output enable and deallocated on output disable,
there cannot be any matches in find-by-crtc from the
pending_output_list.
Remove the loop over pending_output_list as never finding anything by
definition.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
f8570465
by Pekka Paalanen
at 2018-04-18T08:53:54Z
compositor-drm: simplify drm_output_find_special_plane()
As these planes are allocated on output enable and freed on output
disable, there cannot be a match in the pending_output_list.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
13d233ed
by Pekka Paalanen
at 2018-04-18T08:53:54Z
compositor-drm: get current mode on head discovery
The inherited mode is the video mode on the connector when we have not
yet reconfigured the connector, if set.
Get the inherited mode the moment we create a drm_head, not when we
determine the mode for a drm_output. This way we are sure to read all
inherited modes before we reconfigure a single CRTC. Enabling one output
may grab the CRTC from another connector, overwriting whatever mode that
connector might have had.
The inherited mode is stored in drm_head, where we can keep it for the
lifetime of the head, rather than relying on re-loading it from the
kernel at set_mode() time.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
4be24855
by Pekka Paalanen
at 2018-04-18T08:53:54Z
compositor-drm: move mode list to set_mode()
Move the initialization of the drm_output mode list to
drm_output_set_mode() time.
Once we stop creating the drm_head with the drm_output, there will not
be a head to get the mode list from at drm_output creation time.
Furthermore, once DRM-backend starts supporting more than one head per
output, the combined mode list to be exposed to clients (and the
compositor?) must be constructed with all heads attached.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
d2e6242e
by Pekka Paalanen
at 2018-04-18T08:53:54Z
compositor-drm: create heads for all connectors
In previous patches, all the appropriate fields from drm_output have
been moved into drm_head, and resource allocation has been moved away
from drm_output creation. It is time to throw the switch: this patch
disconnects the drm_output and drm_head lifetimes.
Previously a drm_output was created for a connected connector and
destroyed on disconnection. A drm_head was tied to the drm_output
lifetime just to accommodate the head-based output configuration API
temporarily.
Now all connectors will get a head created regardless of their
connection status. Heads are created and destroyed as connectors appear
and disappear (MST), not when they get connected or disconnected. This
should allow the compositor to force-enable a disconnected connector.
An "empty" drm_output is created with weston_backend::create_output()
hook. This now follows the intent of the head-based output configuration
API.
On hotplug events, all connectors' information is updated regardless of
their connection status changes. It is theoretically possible for a
monitor to change without going through a disconnected state in between.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
eacec815
by Pekka Paalanen
at 2018-04-18T08:53:54Z
compositor-drm: remove unused_connectors array
Replace the unused_connectors array by iterating through the head list
instead. A head that is not enabled (attached to an enabled output) is
basically an unused connector.
All connectors regardless of their status have a drm_head. This has the
nice effect that drm_pending_state_apply_atomic() does not need to
re-query the connector properties every time, they can be simply looked
up in the drm_head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
02aeb5c6
by Pekka Paalanen
at 2018-04-18T08:59:06Z
compositor-drm: drm_output_apply_state_legacy heads
Fix this function to support more than one head per output.
v9:
- Change { connectors, 0 } to { NULL, 0 } in drmModeSetCrtc() args.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
2f661305
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: drm_output_apply_state_atomic heads
Fix this function to support more than one head per output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
ecc8cce4
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: drm_set_backlight heads
Fix this function to support more than one head per output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
456dc737
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: unify head status logging
Previously the log contained one line for EDID data and another line for
the head, and you just had to know they belong together. Make it more
obvious to read by putting both head and EDID info on the same line.
We no longer print EDID data every time it is parsed (on every hotplug
event), but only if it changes. I did take a shortcut here and use
weston_head::device_changed as the print condition which relies on the
compositor clearing it, but a failure to do so just means we print stuff
even if it didn't change.
Head info updates also print the head info and not just the EDID data.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
f005f25d
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: combine mode list from heads
A single list of modes needs to be combined from the mode lists in each
attached head. We could just concatenate the lists, but that might
introduce duplicates. Try to avoid duplicates instead by using partially
fuzzy matching.
When a duplicate is found, try to figure out which is more suitable to
use in place of both. If one has the preferred flag and the other
doesn't, take the preferred one. Otherwise use the one already in the
list.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
f8b850d4
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: backlight control for all heads
If an output has multiple (cloned) heads, it should be enough for any
head to support backlight control for DRM-backend to expose it.
Inspect all attached heads for backlight control and improve the
logging.
Pick the initial backlight level from whatever happens to be the "first"
head, because it's simple.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
c0eb2546
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: update video mode printing
Stop using a head for printing the mode list, because there could be
multiple heads. We already gather the mode list from all heads.
No need to print the connector id here, because it is logged with DRM
heads, and core prints the head names on output enable.
The "built-in" flag seemed dead, because it could only be printed if the
kernel provided no modes. If we want more detailed info on where modes
come from, we would need to inspect mode_info or add new flags to
drm_mode or weston_mode.
Add printing the pixel clock, because that is used by the video mode
duplicate removal code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
9c03a7c4
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: introduce drm_head_read_current_setup()
Rename connector_get_current_mode() because it will be useful for
storing not just the current mode on creating a head.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
6fae2be9
by Pekka Paalanen
at 2018-04-18T09:00:52Z
compositor-drm: no need to clear inherited_mode
The head was just zalloc()'d, there is no need to memset it to zero.
If a function fails, it is preferable it leaves the output arguments
untouched.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
-
bb659c8e
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: remove evdev_device::devnode
Struct 'evdev_device' has field 'devnode' which is initialized to NULL,
never assigned, and finally free()'d. Therefore it is useless.
Remove the dead field.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
dfc9d3b8
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: note if calibrating without an output
Print a note that calibration got skipped if the input device supports a
calibration matrix but there is no associated output to compute it from.
Helps with debugging touchscreen calibration issues.
The code is reorganized and commented a bit, but this does not change
the behaviour.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
ed51b624
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: deprecate WL_CALIBRATION
The udev property WL_CALIBRATION is an old way of giving Weston a
touchscreen calibration matrix. It is Weston-specific.
The recommended way of setting up a calibration is to use the udev
property LIBINPUT_CALIBRATION_MATRIX, which libinput will load
automatically and therefore applies to all libinput using display
servers and applications.
The syntax of WL_CALIBRATION and LIBINPUT_CALIBRATION_MATRIX is
different as well: WL_CALIBRATION uses pixels as the translation part
units, which makes the values depend on the output resolution.
LIBINPUT_CALIBRATION_MATRIX on the other hand uses normalized units.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
6632b6dc
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: log input device to output associations
Helps admins ensure the configuration is correct.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
018e6ade
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: make setting the same output a no-op
In the future evdev_device_set_output() will start getting called more
often, redundantly. Short-circuit the setting if the chosen output is
already set for an input device. This reduces churn in the logs.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
98d50cc3
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: allow evdev_device_set_output(dev, NULL)
Removing the output association from an evdev_device is more than just
setting the pointer to NULL, one also needs to remove the destroy
listener and flag the destroy listener as unused (notify == NULL).
evdev_device_set_output() can already remove associations, so let it
also handle an assignment to NULL output.
Fix notify_output_destroy() to handle removing an association correctly.
Previously, the listener was left "used", which would mean the next call
to evdev_device_set_output() would have wl_list_remove()'d, accessing
freed memory. This could be triggered by having a touchscreen with a
specified output association, and unplugging then re-plugging the
corresponding output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
fd02efbc
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: use head names for output matching
Associating input devices with weston_outputs by the output name fails
when one output has several heads. We need to match against head names
instead of output names to be able to find all names.
This fixes touchscreen output association in shared-CRTC clone mode when
outputs or input devices appear or disappear.
Even though notify_output_create() is called only when new outputs
appear, the implementation is prepared to also remove output
associations. This will be handy in the future when this function will
handle also head detaching from an output that remains enabled.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
8dc6db8c
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libweston: require connected heads for input devices
The use case driving this change is a clone mode setup, where the user
is hotplugging or unplugging a cloned touchscreen. Even if the output
and head are force-enabled, the touch device should still follow the
connector connection status. If there is no video signal for the
touchscreen (disconnected connector), then the touch input should be
ignored as well.
When the output is force-enabled, we need to trigger
output_heads_changed from connector status changes. If the head or
output are not force-enabled, the compositor will likely attach and
detach the head as appropriate. In clone mode, the attach or detach
needs to trigger output_heads_changed directly. In other cases, it may
be handled through the output getting enabled or disabled which are
different signals.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
1bbf58ff
by Pekka Paalanen
at 2018-04-20T12:27:54Z
libinput: do not switch output associations on disable
If an input device is associated to an output that then gets disabled,
there is no case where associating to a different output would be
correct.
The output association is used for absolute positioned input devices,
and an input device like a touchscreen cannot ever be automatically
valid for more than one possible output - the touchscreen display
device.
Therefore do not automatically reassing implicitly associated input
devices to another output. This removes some log spam on shutdown.
In fact, if there can be more than one output at any time, absolute
input devices must be explicitly configured to associate with the
correct output, or the results are essentially undefined in any case.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
d61da83c
by Pekka Paalanen
at 2018-04-20T12:27:54Z
man: document WESTON_LIBINPUT_LOG_PRIORITY env
Commit c81c4241d9c9fc5f60c08177dd8a33ae4e4ddca1 added this environment
variable. Document it.
It applies also to the fbdev-backend but that has no man page.
v2:
- Rewording by Peter Hutterer.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
f39249ad
by Pekka Paalanen
at 2018-04-20T12:27:54Z
tests: add test_seat_release() for symmetry
Add test_seat_release() as the counterpart of test_seat_init() instead
of open-coding it. This helps adding more code to test_seat_release()
later.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
925788fc
by Pekka Paalanen
at 2018-04-26T13:55:03Z
Update copyrights for Collabora and General Electric Company
Looking at the diff statistics of the changes authored by me and landed
since 4.0.0 release points out these files as having major changes.
Update the copyright holders accordingly, as both clone mode and
touchscreen calibration related patches are copyright both Collabora and
GE.
I have kept the redundant "Copyright ©" form only to keep things
consistent, even when either the word or the mark would be enough.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
1b043b16
by Pekka Paalanen
at 2018-04-30T12:11:43Z
libweston: unexport weston_{pointer,keyboard,touch}_{create,destroy}()
We have weston_seat_{init,release}_{pointer,keyboard,touch}() as the
backend-facing API. There is no need to expose the create/destroy
functions which have been for internal use only for quite a long time.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
-
8549e165
by Louis-Francis Ratté-Boulianne
at 2018-04-30T12:12:01Z
libweston: fix weston_touch_start_grab() arg name
compositor.c has 'touch', so use 'touch' here as well. It is not a
device to begin with.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
-
27cc4816
by Pekka Paalanen
at 2018-05-02T09:08:34Z
compositor-drm: rewrite crtc picking for clone mode
To support shared-CRTC clone mode, the chosen CRTC needs to support
driving all the attached connectors. Replace the old algorithm with a
new one that takes into account all associated connectors.
Ideally it should use possible_clones mask to check which encoders (and
therefore connectors) actually can be in a cloned set. However, the DRM
documentation says about possible_clones and possible_crtcs masks both:
"In reality almost every driver gets this wrong."
- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms.html#c.drm_encoder
Looking at a target device and its kernel where clone mode is desired,
possible_clones is indeed self-conflicting and would not allow cloning
at all. Therefore the implemented algorithm replaces the checking of
possible_clones with luck. It even goes out of its way to find any CRTC
for a configuration, even if not advertised by the kernel as not
supported.
Libweston would need infrastructure to allow trial-and-error CRTC
allocation: rather than picking one CRTC in advance and do or die, it
should try all available CRTCs one by one. Unfortunately that is not yet
possible, so this patch implements what it can. It is also the DRM
upstream opinion that trial-and-error with ATOMIC_TEST would be the way
to go.
Unlike the old algorithm, the new algorithm prefers routings that were
in place when Weston started instead of when enabling an output. When
you never temporarily disable an output, this makes no difference.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
db4c7d72
by Pekka Paalanen
at 2018-05-02T09:08:34Z
compositor-drm: preserve CRTC routing harder
If we are processing a connector that does not have an existing routing,
it is possible we pick a CRTC that was previously routed to a connector
we have not enabled yet. If that happens, the latter connector cannot
preserve its routing.
Check that no other connector we might enable later had this CRTC
before.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
7f853799
by Pekka Paalanen
at 2018-05-02T09:08:34Z
compositor-drm: head detach requires a modeset
When a head is detached from an enabled output, that output needs to go
through a modeset (drmModeSetCrtc() / ATOMIC_ALLOW_MODESET) so that the
connector is actually removed from the CRTC.
This has not yet been a problem, because an output could only have one
head at a time, and would be automatically disabled on detach. It would
be a problem with clone mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
d5f98d89
by Pekka Paalanen
at 2018-05-02T09:08:34Z
compositor-drm: head attach requires a modeset
For the attach on an enabled output to have an effect, we need to go
through drmModeSetCrtc or ATOMIC_ALLOW_MODESET.
v9:
- Add another XXX comment.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
dfc0683b
by Pekka Paalanen
at 2018-05-02T09:08:34Z
compositor-drm: allow shared-CRTC cloning
Allow cloning up to 4 connectors from the same CRTC. All the
implementation bits support more than one head per output already.
Four is just an arbitary number, small but unlikely to ever be the
limiting factor in cloning since hardware is usually very restricted.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
3ffc6876
by Pekka Paalanen
at 2018-05-02T09:08:34Z
weston: store weston_compositor in wet_compositor
This makes it easier to just pass wet_compositor around and take the
weston_compositor from it.
It feels weird to go from weston_compositor to wet_compositor all the
time in internal functions. It's necessary in callbacks that cannot
carry wet_compositor, but otherwise it is awkward.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
03dc95a1
by Pekka Paalanen
at 2018-05-02T09:08:34Z
weston: use wet.compositor consistently in main()
Rename user_data to wet, because it is called wet everywhere else.
Drop the local variable ec, because that is available as wet.compositor.
This models a little better that wet_compositor owns weston_compositor,
and not the other way around.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
e7a52fbb
by Semi Malinen
at 2018-05-18T10:50:21Z
libweston: add weston_view_set_output()
Instead of desktop shell assigning view outputs directly,
use a new method, weston_view_set_output(). The method can
set up an output destroy listener to make sure that views
do not have stale output pointers.
Without this patch it is possible to end up in a scenario
where, e.g. configure_static_view() accesses memory that
has already been freed. The scenario can be provoked by
repeatedly plugging and unplugging a display. The faulty
memory accesses are reported by valgrind.
Signed-off-by: Semi Malinen <semi.malinen@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
99f8c085
by Semi Malinen
at 2018-05-21T13:51:05Z
desktop-shell: detect stale shell surface outputs
When displays are hot (un)plugged, it may happen that
a shell surface is left with a stale pointer to an output
that has already been freed. Add an output destroy listener
to catch such situations and set the output pointer to NULL.
Signed-off-by: Semi Malinen <semi.malinen@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
99628000
by Pekka Paalanen
at 2018-05-22T09:48:35Z
desktop-shell: fix output destroy signal list corruption
This issue was introduced by "desktop-shell: detect stale shell surface
outputs" which forgot to remove the output destroy listener when
shell_surface is destroyed, leading to memory corruption.
This was fairly easy to trigger by opening and closing an application
window a few times.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
944fae88
by Pekka Paalanen
at 2018-05-22T10:15:58Z
libweston: fix output destroy signal list corruption
This issue was likely introduced by "libweston: add
weston_view_set_output()" which forgot to ensure the output destroy
listener is removed when weston_view is destroyed, leading to freed
memory being left into the list.
This was quite easy to trigger by opening and closing an application
window a few times, leading various memory corruption symptoms.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
acf50c3d
by Pekka Paalanen
at 2018-05-24T14:20:04Z
pixman,drm: do not composite previous damage
Pixman-renderer uses a single internal shadow buffer. It is enough to
composite the current damage into shadow, but the copy to hw buffer
needs to include the previous damage because of double-buffering in
DRM-backend.
This patch lets pixman-renderer do exactly that without compositing also
the previous damage on DRM-renderer.
Arguably weston_output should not have field previous_damage to begin
with, because it implies double-buffering, which e.g. EGL does not
guarantee. It would be better for each backend explicitly always provide
any extra damage that should be copied to hw.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
26ded94a
by Pekka Paalanen
at 2018-05-24T14:20:04Z
pixman: make shadow buffer optional
Add a flag to pixman-renderer for initializing the output with a shadow
framebuffer. All backends were getting the shadow implcitly, so all
backends are modified to ask for the shadow explicitly.
Using a shadow buffer is usually beneficial, because read-modify-write
cycles (blending) into a scanout-capable buffer may be very slow. The
scanout framebuffer may also have reduced color depth, making blending
and read-back produce inferior results.
In some use cases though the shadow buffer might be just an extra copy
hurting more than it helps. Whether it helps or hurts depends on the
platform and the workload. Therefore let the backends control whether
pixman-renderer uses a shadow buffer for an output or not.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
dee412d1
by Pekka Paalanen
at 2018-05-24T14:20:04Z
compositor-drm: expose global shadow flag for pixman
Allow global control of the pixman shadow buffers. The compositor can
choose whether all output use or do not use a shadow buffer with the
pixman renderer.
The option is added to the end of struct weston_drm_backend_config to
avoid bumping WESTON_DRM_BACKEND_CONFIG_VERSION.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
325ff4cb
by Pekka Paalanen
at 2018-05-24T14:20:04Z
main: add setting for DRM/pixman shadow framebuffer
Allows to control the Pixman-renderer shadow framebuffer usage from
weston.ini. It defaults to enabled, and whether it is a good idea to
disable or not depends on the platform and the workload.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
99372bab
by Pekka Paalanen
at 2018-05-24T14:20:04Z
desktop-shell: handle NULL output in get_output_work_area()
This is a tentative crash fix for a case where there are no
enabled weston_outputs at all.
Let get_output_work_area() return a zero area if the given output is
NULL. If there is no output, there is no area. Unfortunately we cannot
return "no position" but have to use 0,0 instead.
In send_configure_for_surface(), this causes a maximized surface to
receive width=0 and height=0 in the configure event, which means the
client is free to choose the size. There is no correct size to send for
maximizing for no output.
In constrain_position(), this has no effect. The interactive move of a
surface is restricted to not go below the panel, so even if a user
managed to move a surface without an output, it just prevents the
surface moving beyond y=0.
In weston_view_set_initial_position(), get_output_work_area() will not
be called with NULL output anyway.
In set_maximized_position(), this makes it behave as if the output was
at 0,0 which is the default position of the first output.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
30aa5975
by Pekka Paalanen
at 2018-05-24T14:20:04Z
desktop-shell: handle NULL output in center_on_output()
This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.
If no output is given, just put the surface at 0,0. At least it should
become mostly visible if an output is plugged in, if not centered.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
87860c20
by Pekka Paalanen
at 2018-05-24T14:20:04Z
desktop-shell: do not lower_fullscreen_layer(s, NULL)
In activate, do not call lower_fullscreen_layer() at all if the output
is NULL. It should not do anything in that case, per the existing
comment.
This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
c63acc4c
by Pekka Paalanen
at 2018-05-24T14:20:04Z
desktop-shell: survive NULL output in shell_configure_fullscreen()
Running 'weston-simple-egl -f -b' (fullscreen, unthrottled) caused a
crash in shell_ensure_fullscreen_black_view() due to
shsurf->fullscreen_output being NULL. Also shell_configure_fullscreen()
could crash on that condition.
Fix shell_configure_fullscreen() to bail out with minimal work if there
is no fullscreen_output.
It is unclear if anything will cause a reconfiguration when an output is
plugged in.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
b0a8317b
by Pekka Paalanen
at 2018-05-24T14:20:04Z
xwm: dump properties of type CARDINAL
Add code to dump CARDINAL arrays from properties. Useful for debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
e0e39b66
by Pekka Paalanen
at 2018-05-24T14:20:04Z
xwm: dump properties of type WINDOW
Very useful for TRANSIENT_FOR property debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
029583e5
by David Fort
at 2018-05-28T11:47:07Z
rdp-compositor: fix compilation against FreeRDP 2.0.0 rc2
The SURFACE_BITS_COMMAND struct has changed and some members have been moved in the
bmp field.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
324cdf29
by Guido Günther
at 2018-05-28T12:24:15Z
simple-dmabuf-drm: 0 is a valid fd (freedreno)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
f9f5953b
by Guido Günther
at 2018-05-28T12:24:15Z
simple-dmabuf-drm: simplify fd_map_bo
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
bff90630
by Guido Günther
at 2018-05-28T12:24:15Z
simple-dmabuf-drm: support etnaviv drm as well
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
f7d035b2
by Guido Günther
at 2018-05-28T12:54:53Z
simple-dmabuf-drm: drop superfluous declaration
variable is defined in simple-dmabuf-drm.h
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
577b3464
by Guido Günther
at 2018-05-28T12:54:53Z
simple-dmabuf-drm: don't exit from create_display
Only exit from main so control flow is in one place.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
74742e05
by Matt Hoosier
at 2018-05-28T13:38:05Z
log: improve handling of use-before-init
Rather than segfaulting by attempting to traverse an initially
null log handler pointer, explicitly print a message and abort.
Signed-off-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
[Pekka: coding style fix]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
da188835
by Guido Günther
at 2018-05-29T08:43:03Z
simple-dmabuf-drm: support DRM_FORMAT_LINEAR for NV12 as well
This makes --import-format=NV12 testable on e.g. intel
We only set nv12_format_found to true if we found that format and at
least one understood modifier. Store modifier verbatim instead of using
a boolean flag. Last advertised and supported modifier currently wins.
The NV12 DRM_FORMAT_LINEAR image should be green in the upper left
corner and white in the lower right.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
e0dc5d47
by Dima Ryazanov
at 2018-05-29T10:26:53Z
Fix a crash when unlocking or unconfining a pointer
In GNOME (but not in Weston), if a window loses focus, the client first receives
the focus event, then the unlock/unconfine event. This causes toytoolkit to
dereference a NULL window when unlocking or unconfining the pointer.
To repro:
- Run weston-confine
- Click the window
- Alt-Tab away from it
Result:
[1606837.869] wl_keyboard@19.modifiers(63944, 524352, 0, 0, 0)
[1606837.926] wl_keyboard@19.leave(63945, wl_surface@15)
[1606837.945] wl_pointer@18.leave(63946, wl_surface@15)
[1606837.956] wl_pointer@18.frame()
[1606837.961] zwp_confined_pointer_v1@26.unconfined()
Segmentation fault (core dumped)
To fix this, get the input from the window instead of the other way around.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
ccdc81d6
by Markus Ongyerth
at 2018-05-29T10:33:13Z
weston-info: Add support for tablet-unstable-v2
This now prints each tablet seat with at least one tablet/pad/tool
attached.
For each tablet seat, each tablet, pad and tool is printed with as much
detail about the device as the protocol provides.
Seat info is stored to be referenced, because the protocol requires to
request a tablet_seat for each wl_seat and it's not guaranteed that the
tablet_v2_manager is available when seats are advertised.
Signed-off-by: Markus Ongyerth <wl@ongy.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
995bf51b
by Markus Ongyerth
at 2018-05-29T10:34:46Z
weston-info: destroy wl_keyboard
Fixes a memory leak by calling wl_keyboard_destroy on any keyboard
that was used to listen for events.
Signed-off-by: Markus Ongyerth <wl@ongy.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
6ef59c98
by Louis-Francis Ratté-Boulianne
at 2018-05-30T11:42:13Z
input: introduce weston_touch_device
Introduce weston_touch_device for libweston core to track individual
touchscreen input devices. A weston_seat/weston_touch may be an
aggregation of several physical touchscreen input devices. Separating
the physical devices will be required for implementing touchscreen
calibration. One can only calibrate one device at a time, and we want to
make sure to handle the right one.
Both backends that support touch devices are updated to create
weston_touch_devices. Wayland-backend provides touch devices that cannot
be calibrated, because we have no access to raw touch coordinates from
the device - calibration is the responsibility of the parent display
server. Libinput backend provides touch devices that can be calibrated,
hence implementing the set and get calibration hooks.
Backends need to maintain an output pointer in any case, so we have a
get_output() hook instead of having to maintain an identical field in
weston_touch_device. The same justification applies to
get_calibration_head_name.
Also update the test plugin to manage weston_touch_device objects.
Co-developed by Louis-Francis and Pekka.
v2:
- Consistently use 'cal' instead of 'calb' or 'matrix'.
- change devpath into syspath
- update copyrights
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
09fbe14e
by Pekka Paalanen
at 2018-05-30T11:42:13Z
libinput: move calibration printing into do_set_calibration()
Move calibration printing here and call do_set_calibration() from
evdev_device_set_calibration() so that all matrix setting paths print
the same way.
Print the matrix values in a matrix style to help readability, and
mention the input device.
v2:
- use 'cal' instead of 'calb' as variable name
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
bcbce330
by Pekka Paalanen
at 2018-05-30T11:45:58Z
libweston: notify_touch API to use weston_touch_device
Relay touch input events into libweston core through the
weston_touch_device, so that the core can tell which individual physical
device they come from.
This is necessary for supporting touchscreen calibration, where one
needs to process a single physical device at a time instead of the
aggregate of all touch devices on the weston_seat.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
f406253d
by Pekka Paalanen
at 2018-05-30T11:46:05Z
libweston: introduce notify_touch_normalized() and doc
notify_touch_normalized() is an extended form of notify_touch(), adding
normalized touch coordinates which are necessary for calibrating a
touchscreen.
It would be possible to invert the transformation and convert from
global coordinates to normalized device coordinates in input.c without
adding this API, but this way it is more robust against code changes.
Recovering normalized device coordinates is necessary because libinput
calibration matrix must be given in normalized units, and it would be
difficult to compute otherwise. Libinput API does not offer normalized
coordinates directly either, but those can be fetched by pretending the
output resolution is 1x1.
Anticipating touch calibration mode, the old notify_touch() is renamed
into a private process_touch_normal(), and the new
notify_touch_normalized() delegates to it.
Co-developed by Louis-Francis and Pekka.
v2:
- introduce struct weston_point2d_device_normalized
- rename notify_touch_cal() to notify_touch_normalized()
- remove WESTON_INVALID_TOUCH_COORDINATE
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
813a06e4
by Louis-Francis Ratté-Boulianne
at 2018-05-30T11:46:05Z
input: move touchpoint counting up
The touchpoint counting is needed regardless of what we do with the
touch events, so move it out of process_touch_normal() into the caller
notify_touch_normalized().
This is pure refactoring.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
332a45e0
by Pekka Paalanen
at 2018-05-30T11:46:14Z
input: do not forward unmatched touch-ups
Commit a30e29af2e4d0ad6fc476ae7cc13c4cad5119217 introduced the code to
deal with a touchscreen with touches already down when Weston starts
using it. It fixed the touchpoint counting problem.
However, Weston still should not forward or process the unmatched
touch-ups either. Code inspection says it would confuse the
idle-inhibit counting, and it could probably confuse clients as well.
Hence, just drop unmatched touch-ups.
Enhance the warning message to allow identifying where the event came
from.
v2:
- use syspath instead of devpath
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
c4689ff1
by Louis-Francis Ratté-Boulianne
at 2018-05-30T11:46:14Z
input: introduce touch event mode for calibrator
In addition to the normal touch event processing mode, introduce a new
mode for calibrating a touchscreen input device.
In the calibration mode, normal touch event processing is skipped, and
the raw events are forwarded to the calibrator instead. The calibrator
is not yet implemented, so the calls will be added in a following patch.
To switch between modes, two functions are added, one for entering each
mode. The mode switch happens only when no touches are down on any touch
device, to avoid confusing touch grabs and clients. To realise this, the
state machine has four states: prepare and actual state for both normal
and calibrator modes.
At this point nothing will attempt to change the touch event mode.
The new calibrator mode is necessary, because when calibrating a
touchscreen, the touch events must be routed to the calibration client
directly. The touch coordinates are expected to be wrong, so they cannot
go through the normal focus surface picking. The calibrator code also
cannot use the normal touch grab interface, because it needs to be able
to distinguish between different physical touch input devices, even if
they are part of the same weston_seat. This requirement makes
calibration special enough to warrant the new mode, a sort of "super
grab".
Co-developed by Louis-Francis and Pekka.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
999876a8
by Pekka Paalanen
at 2018-05-30T11:46:24Z
protocol: add weston_touch_calibration
This is a Wayland protocol extension to allow the calibration of
touchscreens in Weston.
See: https://phabricator.freedesktop.org/T7868
v2:
- replace "server" with "compositor"
- rephrase error conditions to be simpler
- reword the matrix description in 'save' request
- rephrase when touch_device events are sent
- change device id to DEVPATH with "/sys" prefix
- qualify calibration units better
- replace wrong_touch event with a more generic invalid_touch
- fix error enum and add bad_coordinates
- convert while cancelled will not raise any errors
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
83630983
by Louis-Francis Ratté-Boulianne
at 2018-05-30T11:46:24Z
libweston: implement touch calibration protocol
This implements a new global interface weston_touch_calibration, which
allows one client at a time to perform touchscreen calibration. This
also implements the calibrator window management.
A client asks to calibrate a specific physical touch device (not a
wl_seat which may have several physical touch devices aggregated).
Libweston grabs all touch devices and prevents normal touch event
handling during the calibation sequence.
API is added to enable this new global interface, but it not yet called
by anything. Since the implementation allows clients to grab touch devices
arbitrarily, it is not enabled by default. The compositor should take
measures to prevent unexpected access to the interface.
A client may upload a new calibration to the compositor. There is a
vfunc to allow the compositor to reject/accept it and save it to
persistent storage. The persistent storage could be a udev rule
setting LIBINPUT_CALIBRATION_MATRIX, so that all display server would
load the new calibration automatically.
Co-developed by Louis-Francis and Pekka.
v2:
- use struct weston_point2d_device_normalized
- use syspath instead of devpath
- wrong_touch was renamed to invalid_touch
- rename weston_touch_calibrator::cancelled to calibration_cancelled
- send invalid_touch on out-of-bounds touch-down
- cancel touch sequence and send invalid_touch on motion going
out-of-bounds
- rename calcoord_from_double() to wire_uint_from_double()
- send bad_coordinates error in touch_calibrator_convert()
- conversion results in 0,0 if cancelled
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
5a1b0cf0
by Louis-Francis Ratté-Boulianne
at 2018-05-30T11:46:24Z
weston: add touchscreen_calibrator option
Add an option to enable the touchscreen calibrator interface. This is a
global on/off toggle, in lack of more fine-grained access restrictions.
As Weston should not hardcode system specifics, the actual permanent
saving of a new calibration is left for a user supplied script or a
program. Usually this script would write an appropriate udev rule to set
LIBINPUT_CALIBRATION_MATRIX for the touch device.
Co-developed by Louis-Francis and Pekka.
v2:
- use syspath instead of devpath
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
b79dead1
by Louis-Francis Ratté-Boulianne
at 2018-05-30T11:46:24Z
clients: add a new touchscreen calibrator
The new calibrator uses weston_touch_calibration protocol extension and
provides the following features:
- chooses the physical touch device to be calibrated by DEVPATH or by
the output/head name; device enumeration provided
- the compositor ensures the calibrator window is shown in the correct
position and size
- no matter how wrong the old calibration is, the touch events will
always arrive in the application
- the calibration is complete, not incremental; the received touch
events are guaranteed to be unmodified
- computes a libinput style calibration matrix directly, not the
WL_CALIBRATION format
- supports multiple touch devices: calibrate one device at a time, and
show user feedback on touching a wrong device instead of recording bad
data
- uses four touch point samples: three to compute the calibration, and
one to verify the calibration is roughly correct
- consistent exit codes
- upload the new calibration into the server after successful
and verified calibration
Due to using special touchscreen calibration protocol extension, this
application cannot be tested without touch input from the compositor.
Practically all of the above mentioned are unlike how the old
calibrator client worked.
Co-developed by Louis-Francis and Pekka.
v2:
- improve help() text
- rename wrong_touch_handler() to invalid_touch_handler()
- improve debug prints by adding sample number
- reorganize code into sample funcs vs. touch funcs
- add a state machine to properly process touch and related events
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
bfaaedc9
by Pekka Paalanen
at 2018-05-30T11:46:24Z
doc: add example calibration-helper script
This is not to be installed, except maybe as a doc. It is just an
example of what one might do. It also has not been tested, it's just
for giving an idea of what it should do.
It also contains untested speculation.
v2:
- use syspath instead of devpath
- add license blurb
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-
fa6069ad
by Daniel Stone
at 2018-06-07T07:55:39Z
Add .gitlab-ci.yml
Add a GitLab CI configuration which tests building, 'make check', and
'make distcheck' of the tree inside a Debian Stretch container. The
choice of distribution base was arbitrary and may easily be changed.
As the version of wayland-protocols available is not sufficiently new,
we clone and build our own local version first. libwayland is new
enough, however we could potentially reuse the artifacts generated by
the Wayland CI job.
When commits are pushed to upstream, the commits will run this CI
pipeline to run these tests, and capture the result as an artifact
bundle, including the compiled binaries and full test suite logs.
Results can be seen at:
https://gitlab.freedesktop.org/wayland/weston/pipelines/
Signed-off-by: Daniel Stone <daniels@collabora.com>
-
3a80ca06
by Daniel Stone
at 2018-06-07T07:55:39Z
simple-dmabuf-drm: Fallback DRM_FORMAT_MOD_LINEAR definition
Just in case we're running on something quite old.
Signed-off-by: Daniel Stone <daniels@collabora.com>
-
09bfcd6e
by Tomohito Esaki
at 2018-06-07T09:16:35Z
libweston: fix indentation
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
7f4d9ffe
by Tomohito Esaki
at 2018-06-07T09:16:35Z
libweston: Reset repaint schedule for all repainted outputs when repaint cancel
All outputs is canceled repaint when a output repaint is failed. At that
time, the output whose repaint is success is not scheduled because the
repaint status of that is still REPAINT_AWAITING_COMPLETION. Therefore,
we need to reset repaint schedule for all repainted outputs.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
bc04d703
by Yong Gan
at 2018-06-07T17:07:08Z
client: Fix segmentation fault in the case weston-nested
eglTerminate should be called before the display was disconnected.
Signed-off-by: Yong Gan <yong.gan@nxp.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
dcfb1958
by Daniel Stone
at 2018-06-11T09:07:57Z
doc: Update for GitLab migration
Update issue report and build instruction URLs for moving to GitLab, and
for everything having been HTTPS-only for quite some time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
84bc4035
by Peter Hutterer
at 2018-06-11T13:20:39Z
weston-launch: always run through all groups
If the user is in group 0, we'd exit the loop early with a failure. Make sure
we run through all groups.
https://gitlab.freedesktop.org/wayland/weston/issues/86
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
[Pekka: fix one whitespace]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
70e8a32f
by Peter Hutterer
at 2018-06-11T13:21:46Z
compositor: print usage to stdout on success (not stderr)
Triggered by weston --help, the usage() output should not look like an error.
Note that there is only one caller of usage() at the moment, but let's handle
this here based on the status in case we add other cases.
https://gitlab.freedesktop.org/wayland/weston/issues/112
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
a1fd4302
by Peter Hutterer
at 2018-06-12T07:33:46Z
compositor: print usage to stdout on success (not stderr) - this time really
Fix all the other printfs too.
https://gitlab.freedesktop.org/wayland/weston/issues/112
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
002f0c56
by Peter Hutterer
at 2018-06-13T09:16:45Z
man: fix prefixes for weston.ini(5)
Replace a few hardcoded paths with the substitutes
https://gitlab.freedesktop.org/wayland/weston/issues/105
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
e03c111e
by Daniel Stone
at 2018-06-20T11:36:52Z
tests: Don't rely on build directory layout
Rather than having a hardcoded dependency on the build-directory layout,
use an explicit module-map environment variable, which rewrites requests
for modules and helper/libexec binaries to specific paths.
Pekka: This will help with migration to Meson where setting up the paths
according to autotools would be painful and unnecessary.
Emre: This should also help setting up the test suite after a
cross-compile.
Pekka: A caveat here is that this patch makes it slightly easier to load
external backends by abusing the module map. External backends are
specifically not supported in libweston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Fixed ivi_layout-test-plugin.c:wet_module_init().
Do not change the lookup name of ivi-layout.ivi.
Improved documentation of weston_module_path_from_env() and made it cope
with map strings that a) do not end with a semicolon, and b) have
multiple consecutive semicolons.
Let WESTON_MODULE_MAP be printed into the test log so that it is easier
to run tests manually.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Suggested by Emil: Use a variable for strlen(name).
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
c5aaaa7b
by Pekka Paalanen
at 2018-06-20T13:01:03Z
shared: remove weston_config_get_libexec_dir()
Now that WESTON_MODULE_MAP supersedes WESTON_BUILD_DIR for libexec
binaries, we don't need to check in WESTON_BUILD_DIR anymore.
There was only one user of weston_config_get_libexec_dir(), so remove
the whole function. There is no reason to export it.
Due to libshared.la being pulled into libweston, this probably was
libweston ABI unintended. Regardless, libweston major has already been
bumped.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
f5c96467
by Pekka Paalanen
at 2018-06-20T13:10:12Z
tests: remove WESTON_BUILD_DIR from env
There are no users left.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
-
78a42116
by Daniel Stone
at 2018-06-20T13:10:12Z
tests: Reshuffle IVI layout tests
Rename the IVI tests to be more consistent with the others, and invert
the naming of plugin/client to make it slightly more clear what's going
to happen. Handle the renaming by using wet_get_binary_path to rewrite
the local binaries.
As a side-effect, weston.ini ivi-shell-user-interface no longer needs to
be given as an absolute path.
Signed-off-by: Daniel Stone <daniels@collabora.com>
v2:
Call ivi-layout.ivi as ivi-layout-test-client.ivi to keep the same name
in both the file and the lookup, so that the module map does not need to
change the name.
Update code comments to reflect the new names.
Rename ivi_layout-test-plugin.c to ivi-layout-test-plugin.c.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
6a699b1a
by Matheus Santana
at 2018-06-28T10:51:14Z
man: remove redundant word in weston.ini(5)
Signed-off-by: Matheus Santana <embs@cin.ufpe.br>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
944dd235
by Pekka Paalanen
at 2018-06-29T13:07:03Z
weston: support clone mode on DRM-frontend
Add a new output section key "same-as" for configuring clone mode. An
output marked "same-as" another output will be configured identically to
the other output.
The current implementation supports only CRTC sharing for clone mode.
Independent CRTC clone mode cannot be supported until output layout
logic is moved from libweston into the frontend and libweston's damage
tracking issues stemming from overlapping outputs are solved.
Quite a lot of infrastructure is needed to properly configure clone
mode. The implemented logic allows easy addition of independent CRTC
clone mode once libweston supports it. The idea is that wet_layoutput is
the item to be laid out and all weston_outputs a wet_layoutput
contains show exactly the same area of the desktop.
The configuration logic attempts to automatically fall back to creating
more weston_outputs when all heads do not work under the same
weston_output. For now, the fallback path ends with an error message.
Enabling a weston_output is bit complicated, because one needs to first
collect all relevant heads, try to attach them all to the weston_output,
and then back up head by head until enabling the weston_output succeeds.
A new weston_output is created for the left-over heads and the process
is repeated.
CRTC-sharing clone mode is the most efficient clone mode, offering
synchronized scanout timings, but it is not always supported by
hardware.
v10:
- rebased trivial conflicts in man page
- switch to gitlab issue URL
v9:
- replace weston_compositor_set_heads_changed_cb() with
weston_compositor_add_heads_changed_listener()
- remove workaround in simple_head_enable()
v6:
- Add man-page note about cms-colord.
- Don't create an output just to turn it off.
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/22
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
90718170
by Pekka Paalanen
at 2018-06-29T13:08:35Z
weston: add force-on option for DRM
Add a new boolean output section key "force-on". When set to true, the
output will be enabled regardless of connector status. This is the
opposite of the mode=off setting.
Forcing connectors on is useful in special circumstances: avoid output
configuration changes due to hotplug e.g. with KVM switches, or hardware
with unreliable connector status readout for example.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
efdebbc4
by Peter Hutterer
at 2018-07-02T11:52:33Z
configure.ac: bump libdrm requirement to 2.4.68
Had a stale libdrm sitting around which gave me errors, both fixed with the
.68 version.
libweston/pixel-formats.c:291:13: error: ‘DRM_FORMAT_NV24’ undeclared here
(not in a function); did you mean ‘DRM_FORMAT_NV21’?
.format = DRM_FORMAT_NV24,
^~~~~~~~~~~~~~~
DRM_FORMAT_NV21
libweston/pixel-formats.c:296:13: error: ‘DRM_FORMAT_NV42’ undeclared here
(not in a function); did you mean ‘DRM_FORMAT_NV12’?
.format = DRM_FORMAT_NV42,
^~~~~~~~~~~~~~~
DRM_FORMAT_NV12
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
b16c4ac5
by nerdopolis
at 2018-07-02T12:29:38Z
libweston: set the seat automatically based on the XDG_SEAT environment variable
This will allow the seat to be set by the environment as pam_systemd typically
sets the XDG_SEAT variable
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
d68109b9
by nerdopolis
at 2018-07-02T12:29:38Z
compositor-fbdev: support the --seat option, (and XDG_SEAT variable)
This allows the fbdev backend to run on, and use devices from the
specified seat, similar to the drm backend.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
68220dba
by nerdopolis
at 2018-07-02T12:29:38Z
launcher-logind: only get a VT on seat0, as only seat0 supports VTs
As only seat0 supports TTYs, this changes the logind launcher where
it detects a TTY, only if the seat is seat0. This has only been
tested for logind
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
92a06a96
by nerdopolis
at 2018-07-02T12:29:38Z
compositor-fbdev: set fb device info upon the first run.
This attempts to wake up secondary framebuffer devices
(/dev/fb1 and up) as usually these devices start powered off, and
the FBIOPUT_VSCREENINFO ioctl turns it on. This was tested on a
qemu system with the options:
-vga none -device VGA,id=video0 -device secondary-vga,id=video1 \
-device secondary-vga,id=video2
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
4381040d
by nerdopolis
at 2018-07-02T12:29:38Z
compositor-fbdev: detect the first fb device in the seat
This adds a function to detect the first framebuffer device in the
current seat. Instead of hardcoding /dev/fb0, detect the device
with udev, favoring the boot_vga device, and falling back to the
first framebuffer device in the seat if there is none. This is very
similar to what compositor-drm does to find display devices
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
35280448
by nerdopolis
at 2018-07-02T12:29:38Z
main: don't configure /dev/fb0 by default
The framebuffer backend now detects the framebuffer device
dynamically. Don't assume that the framebuffer device is /dev/fb0
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
-
92278e08
by Guido Günther
at 2018-07-03T09:01:57Z
compositor-drm: ignore case of {h,v}sync flags in modeline
Some modeline generators put out e.g. +HSync instead of +hsync. Accept
that too since it's not ambigous.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
82dd54d9
by Pekka Paalanen
at 2018-07-05T07:38:25Z
desktop-shell: fix output removal for background/panel
When the compositor has multiple outputs (not clones) and one of them is
removed, the ones remaining to the right will be moved to close the gap.
Because reflowing the remaining outputs happens before removing the
wl_output global, we get the new output x,y before the removal. This
causes us to consider the remaining output immediately to the right of
the removed output to be a clone of the removed output whose x,y don't
get updated. That will then hit the two assertions this patch removes.
The reason the assertions were not actually hit is because of a
compositor bug which moved the remaining outputs in the wrong direction.
The next patch will fix the reflow, so we need this patch first to avoid
the asserts.
Remove the assertions and hand over the background and panel if the
"clone" does not already have them. If the clone already has them, we
destroy the unnecessary background and panel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Marius Vlad <marius-cristian.vlad@nxp.com>
-
9711fd98
by Pekka Paalanen
at 2018-07-05T07:39:13Z
libweston: fix output reflow on removal
This is regression apparently introduced in
0de859ede4bad72b5d3b78e086632f02196d997f, which accidentally swapped the
sign of 'delta_width' in the original call site. If one removes an
output, the remaining outputs on the right are getting moved even
further to the right.
The outputs to the right should be moved to the left instead, to close
the gap left by the removed output.
Reported-by: Tomasz Olszak <olszak.tomasz@gmail.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
-
f82ff35e
by Ankit Nautiyal
at 2018-07-06T09:09:19Z
man: add description for specifying modes with aspect-ratio in weston.ini
This patch adds information about the new resolution-format that can
be specified by a user in weston.ini to select a CEA mode. CEA defines
timing of a video mode, which is considered as a standard for
HDMI certification and compliance testing. It defines each and every
parameter, of a video mode, like h/vactive,h/vfront h/vback etc.,
including aspect-ratio information. The drm layer, specifies the
aspect-ratio information in user-mode flag bits 19-22. For the non-CEA
modes a value of 0 is given in the aspect-ratio flag bits. Each
CEA-mode is identified by a unique, Video Identification Code (VIC).
For example, VIC=4 is 1280x720@60 aspect-ratio 16:9.
This mode will be different than a non-CEA mode 1280x720@60 0:0.
The new mode-format helps to differentiate between the CEA and
non-CEA modes, by letting user specify aspect-ratio along with other
paremeters: mode=widthxheight@rr ratio.
This helps when certification testing is done, in tests like 7-27,
the HDMI analyzer applies a particular CEA mode, and expects the
applied mode to be with exactly same timings, including the
aspect-ratio and VIC field.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
a21c3931
by Ankit Nautiyal
at 2018-07-06T09:09:39Z
compositor-drm: Add aspect-ratio parsing support
The flag bits 19-22 of the connector modes, provide the aspect-ratio
information. This information can be stored in flags bits of the
weston mode structure, so that it can used for setting a mode with a
particular aspect-ratio.
Currently, DRM layer supports aspect-ratio with atomic-modesetting by
default. For legacy modeset path, the user-space needs to set the
drm client cap for aspect-ratio, if it wants aspect-ratio information
in modes.
This patch:
- preserves aspect-ratio flags from kernel video modes and
accommodates it in wayland mode.
- uses aspect-ratio to pick the appropriate mode during modeset.
- changes the mode format in configuration file weston.ini to
accommodate aspect-ratio information as:
WIDTHxHEIGHT@REFRESH-RATE ASPECT-RATIO
The aspect-ratio can take the following values :
4:3, 16:9, 64:27, 256:135.
v2: As per recommendation from Pekka Paalanen, Quentin Glidic,
Daniel Stone, dropped the aspect-ratio info from wayland protocol,
thereby avoiding exposure of aspect-ratio to the client.
v3: As suggested by Pekka Paalanen, added aspect_ratio field to store
aspect-ratio information from the drm. Also added drm client
capability for aspect-ratio, as recommended by Daniel Vetter.
v4: Minor modifications and fixes as suggested by Pekka Paalanen.
v5: Rebased, fixed some styling issues, and added aspect-ratio
information while printing weston_modes.
v6: Moved the man pages changes to a different patch. Minor
reorganization of code as suggested by Pekka Paalanen.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
[Pekka: replace ARRAY_SIZE with ARRAY_LENGTH]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
85eebdf4
by Daniel Stone
at 2018-07-06T11:15:36Z
compositor-drm: Property accessor can be const
Since it doesn't write to the parameter, we can make it const.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
f9bd5468
by Daniel Stone
at 2018-07-06T11:15:39Z
compositor-drm: Remove unnecessary picked_scanout variable
e2e80136334f fixed the same issue as df573031d0ba in a different way.
The latter commit (applied earlier in the upstream tree) adds a variable
to assign_planes to keep track of when we successfully assign a view to
the scanout plane, and doesn't call prepare_scanout_view if we have.
The former commit adds this checking inside prepare_scanout_view: if the
pending output state already has a framebuffer assigned to the scanout
plane, we drop out of prepare_scanout_view early. The picked_scanout
variable inside assign_planes can thus be removed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
db10df18
by Daniel Stone
at 2018-07-06T11:15:36Z
compositor-drm: Make alpha-to-opaque handling common
Rather than a hardcoded ARGB8888 -> XRGB8888 translation inside a
GBM-specific helper, just determine whether or not the view is opaque,
and use the generic helpers to implement the format translation.
As a consequence of reordering the calls in
drm_output_prepare_overlay_view(), we move the GBM BO dereference into a
different failure path, before it gets captured by the plane state.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
d6e2a76a
by Daniel Stone
at 2018-07-06T12:45:53Z
compositor-drm: Extract buffer->plane co-ord translation
Pull this into a helper function, so we can use it everywhere.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
df2726a0
by Daniel Stone
at 2018-07-06T13:52:05Z
compositor-drm: Fully account for buffer transformation
In our new and improved helper to determine the src/dest values for a
buffer on a given plane, make sure we account for all buffer
transformations, including viewport clipping.
Rather than badly open-coding it ourselves, just use the helper which
does exactly this.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reported-by: Tiago Gomes <tiago.gomes@codethink.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
ce137472
by Daniel Stone
at 2018-07-06T13:52:05Z
compositor-drm: Only check final co-ordinates for overlay scaling
When considering a view for placement into an overlay plane, we
previously checked that the buffer's transform and scale were identical
to the output's, and that there were no transformations applied.
We now use a more consistent set of checks through
drm_plane_state_coords_for_view. This checks the complete transformation
chain, allowing only translation and scaling; at the end, we check if
the total buffer -> surface -> view -> output chain requires scaling or
rotation, and disallow it if so.
This allows scaling in the cases where the transformation chain cancels
itself out to produce a 1:1 buffer -> output pixel scale.
An erroneously disallowed case is where buffer -> view -> output
rotations cancel each other out; we prevent a view from being on an
overlay plane if rotation is involved at all. Fixing this would require
a complete analysis of the overall transformation matrix.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
7cdf231c
by Daniel Stone
at 2018-07-06T13:52:05Z
compositor-drm: Use plane_state_coords_for_view for scanout
Now that we have a helper to fill the plane state co-ordinates from a
view, use this for the scanout plane.
We now explicitly check that the view fills exactly the fullscreen area
and nothing else. We then use the new helper to fill out the plane state
values, and do further checks against the filled-in co-ordinates, i.e.
that we're not trying to show an offset into the buffer, or to scale the
image.
This now allows cases where the buffer -> surface -> view -> output
transform chain cancels each other out for scaling: previously, we would
never consider a buffer for scanout unless its scale matched the
output's. We now only look at the final result of the buffer -> output
transformation, to check that this does not result in translation or
scaling.
An audit of the error paths found some places where we would leave a
plane state hanging; this makes them all consistent.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
9b560384
by Daniel Stone
at 2018-07-06T13:56:16Z
compositor-drm: Use plane_state_coords_for_view for cursor
Use the new helper to populate the cursor state as well, with some
special-case handling to account for how we always upload a full-size
BO.
As this now fully takes care of buffer transformations, HiDPI client
cursors work, and we also clip the cursor plane completely to CRTC
bounds.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reported-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/118
-
f11ec02c
by Daniel Stone
at 2018-07-06T14:04:52Z
compositor-drm: Extract overlay FB import to helper
... in order to be able to use it from scanout as well.
In doing this, the check for format compatibility is moved from after
selecting a plane to before selecting a plane. If different planes have
disjoint format support, this ensures that we don't reject the view from
all overlay consideration, just because the first plane we found didn't
support its format.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
bdf3e7e3
by Daniel Stone
at 2018-07-06T14:04:52Z
compositor-drm: Use plane FB-import helper for scanout
Use the same codepath, which has the added advantage of being able to
import dmabufs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
8eece0c2
by Daniel Stone
at 2018-07-06T14:04:52Z
compositor-drm: Extract drm_fb_addfb into a helper
We currently do the same thing in two places, and will soon have a
third.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
65a4dbcc
by Daniel Stone
at 2018-07-06T14:04:52Z
compositor-drm: Support modifiers for drm_fb
Use the new drmModeAddFB2WithModifiers interface to import buffers with
modifiers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
79e95cb9
by Ankit Nautiyal
at 2018-07-09T12:14:47Z
man: Remove description of DRM specific mode-options from weston.ini.man
The weston.ini.man describes the mode-formats that a user can specify
for selecting a video mode. The DRM specific examples are already
provided in weston-drm.man, so this inofrmation is redundant and can
be removed.
This patch removes the DRM specific mode option details from the
description of mode configuration in weston.ini.man.
A pointer to weston-drm.man is given, which has complete information
about the mode-format options supported by DRM backend.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
7625577a
by Daniel Stone
at 2018-07-09T12:30:03Z
compositor-drm: Define DPMS property as an enum
The DPMS connector property is an enum property in KMS, which made our
property handling complain at startup as we weren't defining its enums.
Fix our definition so we parse the enum values.
The only user of the property is the legacy path, which can continue
using fixed values as those values are part of the KMS ABI. The atomic
path does not need any changes, since atomic uses routing and CRTC
active to determine the connector's power state, rather than a property.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/125
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
dc082cb0
by Daniel Stone
at 2018-07-09T14:20:11Z
compositor-drm: Avoid cast by using unsigned loop index
ARRAY_LENGTH returns a size_t; rather than casting its result to
int so we can compare to our signed index variable, just declare the
index as a compatible type in the first place.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
bdebc317
by Daniel Stone
at 2018-07-09T14:20:11Z
compositor-drm: Don't set fb->size for non-dumb buffers
When creating a drm_fb from client (wl_buffer/dmabuf), gbm_surface, or
client buffers, set fb->size to 0. The size member is only used for dumb
buffers, where we mmap the whole buffer, and need the size recorded to
later pass to munmap.
Determining the full size of multi-planar buffers is difficult, as
auxiliary planes are not guaranteed to have a (height*stride)
allocation, e.g. if they are subsampled or if they do not contain pixel
data at all but, e.g., compression information. Single-plane tiled
buffers also often pad the buffer allocation to a multiple of tile
height, making our existing calculation incorrect.
Though it does no harm to record incorrect information, it also does
no good as we never use it; remove it in order to avoid any confusion.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
11f91bbd
by Daniel Stone
at 2018-07-09T14:39:20Z
helpers: Move static_assert definition to shared
Collect the fallback definitions of static_assert() from desktop-shell
and the test shell, and move them to helpers.h. This allows code
throughout the tree to use static_assert() for build-time assertions,
where it is supported by the compiler.
As GCC goes out of its way to only add static_assert() when C11 has been
explicitly requested - which we don't do - make sure to use the more
widely available _Static_assert() if that is provided.
This will be used in future patches to ensure two array lengths don't go
out of sync.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
f522e226
by Daniel Stone
at 2018-07-09T14:39:32Z
compositor-drm: Add modifiers to GBM dmabuf import
Add support for the GBM_BO_IMPORT_FD_MODIFIER path, which allows us to
import multi-plane dmabufs, as well as format modifiers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/113
-
f4456221
by Sergi Granell
at 2018-07-09T14:39:32Z
compositor-drm: Support plane IN_FORMATS
The per-plane IN_FORMATS KMS property describes the format/modifier
combinations supported for display on this plane. Read and parse this
format, storing the data in each plane, so we can know which
combinations might work, and which combinations definitely will not
work.
Similarly to f11ec02cad40 ("compositor-drm: Extract overlay FB import to
helper"), we now use this when considering promoting a view to overlay
planes. If the framebuffer's modifier is definitely not supported by the
plane, we do not attempt to use that plane for that view.
This will also be used in a follow-patch, passing the list of modifiers
to GBM surface allocation to allow it to allocate more optimal buffers.
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
244244d1
by Daniel Stone
at 2018-07-09T14:39:32Z
compositor-drm: Use GBM modifier API
Now that we collect information about which modifiers are supported for
KMS display, and are able to create KMS framebuffers with modifiers,
begin using the modifier-aware GBM API.
Client buffers from dmabuf already store multi-plane and modifier
information into drm_fb. Extend this to drm_fb_get_from_bo(), used for
wl_buffer, cursor, and gbm_surface buffers. wl_buffer buffers should by
convention not require modifiers. Cursor buffers must not require
modifiers, as they should be linear. Prior to this patch, GBM buffers
must have been single-planar, and able to used without explicitly naming
modifiers.
Using gbm_surface_create_with_modifiers allows us to pass the list of
modifiers acceptable to KMS for scanout to GBM, so it can allocate
multi-planar buffers or those which are otherwise only addressible with
modifiers. On platforms supporting and preferring modifiers for scanout,
this means that the gbm_bos we get from our scanout surface need to use
the extended API to query multiple planes, offsets, modifiers, etc.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
ee1aea7c
by Daniel Stone
at 2018-07-10T10:12:27Z
compositor-drm: Split drm_assign_planes in two
Move drm_assign_planes into two functions: one which proposes a plane
configuration, and another which applies that state to the Weston
internal structures. This will be used to try multiple configurations
and see which is supported.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
231ae2f3
by Daniel Stone
at 2018-07-10T10:12:27Z
compositor-drm: Ignore views on other outputs
When we come to assign_planes, try very hard to ignore views which are
only visible on other outputs, rather than forcibly moving them to the
primary plane, which causes damage all round and unnecessary repaints.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
8108239c
by Daniel Stone
at 2018-07-10T10:12:27Z
compositor-drm: Ignore occluded views
When trying to assign planes, keep track of the areas which are
already occluded, and ignore views which are completely occluded. This
allows us to build a state using planes only, when there are occluded
views which cannot go into a plane behind views which can.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Emre Ucan <eucan@de.adit-jv.com>
-
ddaf95c5
by Tomohito Esaki
at 2018-07-10T12:40:52Z
libweston: Fix clear timing of output repainted flag
Since the repaint status of the flushed output may be reset if a output
repaint is failed, it is necessary to clear the repainted flag
immediately after output repaint flush/cancel.
Signed-off-by: Tomohito Esaki <etom@igel.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
a0f8276f
by Daniel Stone
at 2018-07-11T11:24:55Z
compositor-drm: Disallow overlapping overlay planes
The scanout plane strictly stacks under all overlay planes, and the
cursor plane above. However, the stacking of overlay planes with respect
to each other is undefined.
We can control the stacking order of overlay planes with the zpos
property, though this significantly complicates plane assignment. In the
meantime, simply disallow assigning a view to an overlay, when it
overlaps another view which is already on an overlay. This ensures
stacking order is irrelevant, since the planes never intersect each
other.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
44abfaaf
by Daniel Stone
at 2018-07-11T11:24:55Z
compositor-drm: Use sprites_are_broken for scanout plane
When the sprites_are_broken variable is set, do not attempt to promote
client surfaces to the scanout plane.
We are currently assuming that every client buffer will be compatible
with the scanout plane, but that is not the case, particularly with more
exotic tiled/compressed buffers. Once we promote the client buffer to
scanout, there is no going back: if the repaint fails, we do not mark
this as failed and go back to repaint through composition.
This permanently removes the ability for scanout bypass when using the
non-atomic path. Future patches lift the restriction when using atomic
modesetting, as we can actually test and ensure that the view is
compatible with scanout.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
f7a2f835
by Daniel Stone
at 2018-07-11T11:24:55Z
compositor-drm: Add modes to drm_output_propose_state
Add support for multiple modes to drm_output_propose_state. Currently we
intend to operate in three modes: planes-only (no renderer buffer,
client buffers in planes only), mixed-mode (promote client buffers to
planes where possible, falling back to the renderer where not), and
renderer-only (no plane usage at all).
We want to use the first (planes-only) mode where possible: it can avoid
us having to allocate buffers for the renderer, and it also gives us the
best chance of the optimal configuration, with no composition. In this
mode, we walk the scene looking at all views, trying to put them in
planes, and failing as soon as we find a view we cannot place in a
plane.
In the second mode, rather than failing, we assign those views which
cannot be on a plane to the renderer, and allow the renderer to
composite them.
In the third mode, planes are not usable, so everything but the cursor
goes to the renderer. We will use this when we cannot use the planes-only
mode (because some views cannot be placed in planes), but also cannot
use the 'mixed' mode because we have no renderer buffer yet. Since we
walk the scene graph from top to bottom, using atomic modesetting we
will determine if planes can be promoted in mixed mode by placing a
renderer buffer at the bottom of the scene, placing a cursor buffer if
applicable, then testing if we can add overlay planes to this mode.
Without a buffer from the renderer, we cannot do these tests, so we push
everything through the renderer and then switch to mixed mode on the
next repaint.
This patch implements the mixed and renderer-only modes (previously
differentiated only by the sprites_are_broken flag), with the
planes-only mode being left for a later patch.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
f829062e
by Daniel Stone
at 2018-07-11T11:45:07Z
compositor-drm: Return plane state from plane preparation
Return a pointer to the plane state, rather than returning its
underlying weston_plane. This eliminates any ambiguity between placing
client buffers on planes, and placing them through the renderer.
drm_output_propose_state is only concerned with preparing, testing, and
returning DRM state objects. Assigning views to weston_planes only
happens later, inside drm_assign_planes. This makes that split more
clear.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
bb6c19f7
by Daniel Stone
at 2018-07-11T11:49:53Z
compositor-drm: Add test-only mode to state application
The atomic API can allow us to test state before we apply it, to see if
it will be valid. Use this when we construct a plane configuration, to
see if it has a chance of ever working. If not, we can fail
assign_planes early.
This will be used in later patches to incrementally build state by
proposing and testing potential configurations one at a time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
ca6fbe3c
by Daniel Stone
at 2018-07-11T11:50:23Z
compositor-drm: Never lift solid surfaces to planes
This will never work, so don't even try to do it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
d12e5164
by Daniel Stone
at 2018-07-11T12:08:57Z
compositor-drm: Add planes-only mode to state proposal
Add a new mode, which attempts to construct a scene exclusively using
planes. This is a building block for incrementally testing and
constructing state: in the plane-only mode, we test the state exactly
once, when we have constructed a full set of planes and want to know if
it works or not.
When using the renderer, we need to incrementally test views one by one
to see if they will work on planes, falling back to the renderer if not.
This test is different, since the scanout plane will be occupied by the
renderer's buffer. Testing using the renderer or client buffers may have
completely different characteristics, so we need two passes: first,
constructing a state with only planes and testing if that succeeds,
falling back later to a mixed renderer/plane mode which tests
incrementally.
This implements the first mode, and preferentially attempts to use it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
a284d271
by Daniel Stone
at 2018-07-11T13:17:52Z
compositor-drm: Incrementally test plane states in mixed mode
In the plane-only mode, we try to place every view on a hardware plane,
and fail if we can't do this. This requires a full walk of the scene
graph to come up with a complete configuration in order to be able to
test.
In mixed mode, we know at least some visible views will fail to be
promoted to planes and must be composited via the renderer. In order to
still use some planes where possible, we use atomic modesetting's
test-only mode to incrementally test configurations.
We know that the renderer output will always be visible, and because it
is the renderer, that it will be occupying the scanout plane underneath
everything else. The actual renderer buffer doesn't materialise until
after assign_planes, because it cannot know what to render until then.
However, in order to test whether a configuration is valid, we need the
renderer buffer in the scanout plane. For testing, we fake this by
temporarily stealing the old buffer - if it seems sufficiently
compatible - and placing it in the state we construct. This is used to
test whether or not a renderer buffer will work with the addition of
overlay planes.
Doing this incremental testing will allow us to enable plane usage for
atomic by default, since we know ahead of time that our chosen plane
configuration will work.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
b41abf9c
by Daniel Stone
at 2018-07-11T13:17:52Z
compositor-drm: Allow scanout plane to be occluded by overlay
a0f8276fe814 ("compositor-drm: Disallow overlapping overlay planes") was
a little too pessimistic in rejecting occluded views. Whilst it
correctly prevented overlay planes from occluding each other, it also
prevented overlay planes from occluding the scanout plane.
This is undesirable: the primary/scanout plane is specified to stack
strictly below all overlay planes, so there is no need to reject a plane
from consideration for scanout due to being occluded by an overlay
plane.
Shift the check downwards so it only applies to overlay rather than
scanout planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
9fe4bf88
by Daniel Stone
at 2018-07-11T13:17:52Z
compositor-drm: Relax plane restrictions for atomic
Since we now incrementally test atomic state as we build it, we can
loosen restrictions on what we can do with planes, and let the kernel
tell us whether or not it's OK.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
678aabe8
by Daniel Stone
at 2018-07-11T13:17:52Z
compositor-drm: Enable planes for atomic
Now that we can sensibly test proposed plane configurations with atomic,
sprites are not broken.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
1166f8e9
by Emilio Pozuelo Monfort
at 2018-07-13T15:13:23Z
simple-dmabuf-drm: require zwp_linux_dmabuf_v1 v3
We effectively require it as we don't react to dmabuf_format,
only to dmabuf_modifiers, so there's a chance we may not get
the supported formats information at all.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
cce820dc
by Emilio Pozuelo Monfort
at 2018-07-13T15:13:32Z
simple-dmabuf-drm: fix build with --disable-egl
Just rely on getting the supported formats through the dmabuf
extension.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
280b7301
by Derek Foreman
at 2018-07-13T16:32:29Z
configure.ac: bump to version 4.0.91 for the alpha release
-
cf4113c6
by Emre Ucan
at 2018-07-22T10:06:38Z
ivi-shell: listen compositor wake_signal
If compositor wakes up from sleep state, we have
to trigger repaint for all outputs.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
67546bed
by Emre Ucan
at 2018-07-22T10:17:40Z
ivi-shell: use install paths in example config
The example weston.ini file uses source and build
directory paths. Therefore, it is only useful when
used on the same system that is used to build Weston.
We can use install paths instead of build/source paths
to fix this problem.
v2 changes:
- use $(westondatadir) instead of $(datadir)
Reported-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
3ea5437d
by Greg V
at 2018-07-22T10:37:58Z
xwayland/selection: do not remove NULL property_source
Happened mostly with neovim's xclip usage.
[daniels: Added more cases.]
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
8c9556c5
by Daniel Stone
at 2018-07-27T16:20:25Z
compositor-drm: Remove unnecessary libdrm defines
The backend begins with a series of #defines of libdrm tokens, in case
the libdrm we build against is too old.
Commit efdebbc4e82b ("configure.ac: bump libdrm requirement to 2.4.68")
did what it said on the box; since we now depend on a relatively modern
libdrm, we can get rid of most of our compatibility defines.
DRM_CAP_TIMESTAMP_MONOTONIC was added in libdrm 2.4.47 (f8f1f6e37ae2).
DRM_CLIENT_CAP_UNIVERSAL_PLANES was added in libdrm 2.4.55
(8fc62ca8ac01).
DRM_CAP_CURSOR_WIDTH and HEIGHT were added in libdrm 2.4.68
(cc9a53f076d4).
Remove these four fallback definitions.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Derek Foreman <derek.foreman.samsung@gmail.com>
-
11789225
by Daniel Stone
at 2018-07-27T16:20:47Z
compositor-drm: Don't test render-only atomic configuration
In the RENDERER_ONLY state proposal mode, we don't actually have a
viable configuration to test, because we won't get a renderer buffer
until after assign_planes - where we're called from - has completed.
This can result in us trying to test a configuration with the CRTC and
connectors active, but no planes active, which the kernel can
legitimately fail.
If we're working in renderer-only mode, just return the state we have
without trying to test it first, and let the kernel fill it in later.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Derek Foreman <derek.foreman.samsung@gmail.com>
-
48687982
by Daniel Stone
at 2018-07-27T16:21:10Z
compositor-drm: Remove addfb warning for user buffers
THe KMS AddFB call can fail for any reason at all: format/modifier not
suitable, stride not aligned, allocation not contiguous, etc. If this
happens with Weston's own buffers, the result is bad - no composition
output.
Failing AddFB from user-supplied buffers though, is not an error. The
user can't necessarily allocate suitable buffers, nor does it have to.
Don't spam the log with warnings when we fail on user buffers.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derek.foreman.samsung@gmail.com>
-
0335e447
by Derek Foreman
at 2018-07-27T16:45:59Z
configure.ac: bump to version 4.0.92 for the beta release
-
2e3915f1
by Pekka Paalanen
at 2018-08-06T10:55:40Z
Add CONTRIBUTING.md document
Taken from Pekka's wayland/wayland@630c25f4c160 and follow-ups, use
Wayland's CONTRIBUTING document as a basis for Weston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
3a6fa200
by Daniel Stone
at 2018-08-06T10:55:43Z
doc: Update CONTRIBUTING for Weston
Change some Wayland-specific references to instead refer to Weston.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
f987cb98
by Daniel Stone
at 2018-08-07T13:38:24Z
README: Move to Markdown, rewrite introduction
Move the README file to Markdown, and update it to attempt to explain
the current status and use of Weston.
The first sections are user-facing, so they can quickly understand what
Weston is, what it does, what it doesn't do, and how to go about using
it. The following sections on libweston and for distribution packagers
are left intact, but should probably be moved to separate documents.
This includes a screenshot of Weston running weston-terminal, Chrome and
simple-egl, which was taken by myself and subject to the same licensing
terms as the rest of the tree.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
8798fa7f
by Daniel Stone
at 2018-08-07T13:38:38Z
doc: Use GitLab MRs for patches, not the list
Though Wayland and the protocols still use mail-based patch review,
Weston can now move to GitLab MRs with review through that system.
Add some documentation on how to submit patches through GitLab,
specifically targeted at people who may be familiar with GitLab review,
but not familiar with our rebasing microcommit workflow.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
103dc42b
by Will Thompson
at 2018-08-07T14:19:01Z
doc: fix typos in CONTRIBUTING.md
* Cover letters are no more; presumably the changes since the previous
revision should be summarised in the MR
* Code should be indented with tabs, not implemented with tabs
Signed-off-by: Will Thompson <will@willthompson.co.uk>
-
b8b2c727
by Harsha M M
at 2018-08-08T09:22:24Z
libweston: Remove signals from the list during de-init
During de-init ensure removal of added signals from list. Otherwise
a dongling pointer is left behind which will affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
46cbd0a7
by Harsha M M
at 2018-08-10T10:23:14Z
ivi-shell: Remove the compositor destory listener from list during de-init
During de-init ensure removal of compositor destroy notification
from list. Otherwise a dongling pointer is left behind which will
affect other plugins.
Signed-off-by: Harsha M M <harsha.manjulamallikarjun@in.bosch.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
-
dc1418ae
by Derek Foreman
at 2018-08-10T18:03:57Z
configure.ac: bump to version 4.0.93 for the RC1 release
-
f8f7fd69
by Derek Foreman
at 2018-08-17T14:25:21Z
input: add weston_keyboard_send_keymap helper function
We've always had "send_keymap" internally, but some places failed to use
it. Since we also use this in the text backend, export it.
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
76829fc4
by Derek Foreman
at 2018-08-17T14:25:24Z
input: Send unique keymap file descriptors to clients
Client may map any file descriptor opened for writing with PROT_WRITE
themselves. On linux, even a read-only file descriptor to an unlinked
file can be re-opened with write permission through /proc/self/fd.
The only way to prevent this is to create a memfd which
is subsequently write-sealed. Unfortunately this prevents clients
from mapping with MAP_SHARED, which is already in widespread usage.
To isolate and protect the keymap, whilst allowing MAP_SHARED clients
to continue to work, use a unique file descriptor for each
wl_keyboard resource.
Reviewed-by: Daniel Stone <daniels@collabora.com>
-
45334510
by Derek Foreman
at 2018-08-17T16:20:27Z
configure.ac: bump to version 4.0.94 for the RC2 release
-
30e283de
by Stefan Agner
at 2018-08-20T15:11:38Z
compositor-drm: add DPI connector type
Linux v4.7 introduced a new connector type for display parallel
interface (DPI). Add DPI to the list of connectors in the DRM
backend of Weston as well. This avoid DPI connectors showing up
as UNNAMED.
Signed-off-by: Stefan Agner <stefan@agner.ch>
-
030e7d40
by Derek Foreman
at 2018-08-24T17:39:33Z
configure.ac: bump to version 5.0.0 for the official release
-
6abbb10a
by Emilio Pozuelo Monfort
at 2018-09-18T09:41:53Z
Merge branch 'upstream-unstable' into debian-unstable
-
171e8303
by Emilio Pozuelo Monfort
at 2018-09-18T09:41:55Z
New upstream release
-
b4e546a0
by Emilio Pozuelo Monfort
at 2018-09-18T09:46:25Z
Update build dependencies
-
56b14154
by Emilio Pozuelo Monfort
at 2018-09-18T09:50:26Z
Rename packages for soname bump
-
99fe7949
by Emilio Pozuelo Monfort
at 2018-09-18T10:00:56Z
Update symbols file
-
4a970a52
by Emilio Pozuelo Monfort
at 2018-09-18T10:16:56Z
Release to unstable