Bug#879624: xorg: After upgrade to buster: system doesnt start x-server anymore but stop reacting
Package: xserver-xorg
Followup-For: Bug #879624
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
I have an Acer Aspire One D270. Graphics driver was a problem from the
beginning but after sometime in 2013, the problems went away and the
laptop functioned smoothly. I use a stripped down version of the Debian
testing OS without any display-manager. I log into the console and use startx
to start an Xmonad session.
Everything was fine till linux kernel 4.13. Two weeks back, I upgraded
to linux kernel 4.14.0-3. I cannot make X work under the new kernel. It
works fine with the old kernel.
In the new kernel, I get till the console login screen. Everything
works fine in the console. However, as soon I run startx, the screen
goes black with the backlight at its brightest. Nothing comes on the
screen. Trying to switch to console useing Ctrl-Alt-Fn doesn't work for
any n=2,3,4,5,6. The only way is to reboot. I use Ctrl-Alt-F2 followed
by Ctrl-Alt-Delete.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I created an /etc/X11/xorg.conf using Xorg -configure. It crashed
but it created an xorg.conf.new nevertheless. I manually
set the driver to "modesetting".
* What was the outcome of this action?
It works sometimes after a lot of reboots. But not always. I cannot
figure out if there is some pattern as the number of times it works is
very few compared to the number of times it doesn't work.
*** End of the template - remove these template lines ***
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Apr 24 2017 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Jan 18 17:41 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller [8086:0be1] (rev 09)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 2017 Feb 4 13:37 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "modesetting"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.14.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-19)) #1 SMP Debian 4.14.13-1 (2018-01-14)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 13273 Feb 4 13:36 /var/log/Xorg.0.log
-rw-r--r-- 1 testing testing 48342 Feb 4 13:48 /home/testing/.local/share/xorg/Xorg.0.log
Contents of most recent Xorg X server log file (/home/testing/.local/share/xorg/Xorg.0.log):
--------------------------------------------------------------------------------------------
[ 76.534]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 76.538] X Protocol Version 11, Revision 0
[ 76.540] Build Operating System: Linux 4.9.0-5-amd64 x86_64 Debian
[ 76.541] Current Operating System: Linux torsor 4.14.0-3-amd64 #1 SMP Debian 4.14.13-1 (2018-01-14) x86_64
[ 76.542] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-3-amd64 root=UUID=e97cb5f9-d185-4c76-a204-8ec1579bdd16 ro
[ 76.545] Build Date: 26 January 2018 04:30:21PM
[ 76.547] xorg-server 2:1.19.6-1 (https://www.debian.org/support)
[ 76.549] Current version of pixman: 0.34.0
[ 76.553] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 76.553] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 76.561] (==) Log file: "/home/testing/.local/share/xorg/Xorg.0.log", Time: Sun Feb 4 13:41:30 2018
[ 76.602] (==) Using config file: "/etc/X11/xorg.conf"
[ 76.604] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 76.679] (==) ServerLayout "X.org Configured"
[ 76.679] (**) |-->Screen "Screen0" (0)
[ 76.679] (**) | |-->Monitor "Monitor0"
[ 76.680] (**) | |-->Device "Card0"
[ 76.680] (**) |-->Input Device "Mouse0"
[ 76.680] (**) |-->Input Device "Keyboard0"
[ 76.680] (==) Automatically adding devices
[ 76.680] (==) Automatically enabling devices
[ 76.680] (==) Automatically adding GPU devices
[ 76.680] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 76.758] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 76.758] Entry deleted from font path.
[ 76.897] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 76.897] Entry deleted from font path.
[ 76.897] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 76.897] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 76.897] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 76.897] (WW) Disabling Mouse0
[ 76.897] (WW) Disabling Keyboard0
[ 76.913] (II) Loader magic: 0x5601a1db7de0
[ 76.914] (II) Module ABI versions:
[ 76.914] X.Org ANSI C Emulation: 0.4
[ 76.914] X.Org Video Driver: 23.0
[ 76.914] X.Org XInput driver : 24.1
[ 76.914] X.Org Server Extension : 10.0
[ 76.917] (++) using VT number 1
[ 76.923] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 76.926] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 76.929] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 76.934] (--) PCI:*(0:0:2:0) 8086:0be1:1025:061f rev 9, Mem @ 0x46000000/1048576, I/O @ 0x000050d0/8, BIOS @ 0x????????/131072
[ 76.935] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 76.935] (II) LoadModule: "glx"
[ 77.016] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 77.111] (II) Module glx: vendor="X.Org Foundation"
[ 77.111] compiled for 1.19.6, module version = 1.0.0
[ 77.111] ABI class: X.Org Server Extension, version 10.0
[ 77.111] (II) LoadModule: "modesetting"
[ 77.157] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 77.179] (II) Module modesetting: vendor="X.Org Foundation"
[ 77.179] compiled for 1.19.6, module version = 1.19.6
[ 77.179] Module class: X.Org Video Driver
[ 77.179] ABI class: X.Org Video Driver, version 23.0
[ 77.179] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 77.180] (II) modeset(0): using drv /dev/dri/card0
[ 77.180] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 77.180] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 77.181] (==) modeset(0): RGB weight 888
[ 77.181] (==) modeset(0): Default visual is TrueColor
[ 77.181] (II) Loading sub module "glamoregl"
[ 77.181] (II) LoadModule: "glamoregl"
[ 77.181] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 77.295] (II) Module glamoregl: vendor="X.Org Foundation"
[ 77.295] compiled for 1.19.6, module version = 1.0.0
[ 77.295] ABI class: X.Org ANSI C Emulation, version 0.4
[ 77.295] (II) glamor: OpenGL accelerated X.org driver based.
[ 79.546] (II) glamor: EGL version 1.4 (DRI2):
[ 79.546] EGL_MESA_drm_image required.
[ 79.548] (EE) modeset(0): glamor initialization failed
[ 79.548] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[ 79.572] (II) modeset(0): Output VGA-1 using monitor section Monitor0
[ 79.636] (II) modeset(0): Output LVDS-1 has no monitor section
[ 79.640] (II) modeset(0): Output DVI-D-1 has no monitor section
[ 79.641] (II) modeset(0): Output DP-1 has no monitor section
[ 79.664] (II) modeset(0): EDID for output VGA-1
[ 79.728] (II) modeset(0): EDID for output LVDS-1
[ 79.728] (II) modeset(0): Manufacturer: AUO Model: 61d2 Serial#: 0
[ 79.728] (II) modeset(0): Year: 2009 Week: 0
[ 79.728] (II) modeset(0): EDID Version: 1.3
[ 79.728] (II) modeset(0): Digital Display Input
[ 79.728] (II) modeset(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 79.728] (II) modeset(0): Gamma: 2.20
[ 79.728] (II) modeset(0): No DPMS capabilities specified
[ 79.728] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 79.728] (II) modeset(0): First detailed timing is preferred mode
[ 79.728] (II) modeset(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540
[ 79.728] (II) modeset(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 79.728] (II) modeset(0): Manufacturer's mask: 0
[ 79.728] (II) modeset(0): Supported detailed timing:
[ 79.728] (II) modeset(0): clock: 49.8 MHz Image Size: 222 x 125 mm
[ 79.728] (II) modeset(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1338 h_border: 0
[ 79.728] (II) modeset(0): v_active: 600 v_sync: 602 v_sync_end 608 v_blanking: 620 v_border: 0
[ 79.728] (II) modeset(0): Unknown vendor-specific block f
[ 79.728] (II) modeset(0): AUO
[ 79.729] (II) modeset(0): B101AW06 V1
[ 79.729] (II) modeset(0): EDID (in hex):
[ 79.729] (II) modeset(0): 00ffffffffffff0006afd26100000000
[ 79.729] (II) modeset(0): 0013010380160d780a15859758538a26
[ 79.729] (II) modeset(0): 25505400000001010101010101010101
[ 79.729] (II) modeset(0): 0101010101017413003a415814203020
[ 79.729] (II) modeset(0): 2600de7d000000180000000f00000000
[ 79.729] (II) modeset(0): 00000000000000000020000000fe0041
[ 79.729] (II) modeset(0): 554f0a202020202020202020000000fe
[ 79.729] (II) modeset(0): 004231303141573036205631200a0029
[ 79.729] (II) modeset(0): Printing probed modes for output LVDS-1
[ 79.729] (II) modeset(0): Modeline "1024x600"x60.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP)
[ 79.729] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 79.729] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 79.730] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 79.730] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 79.730] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 79.730] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 79.730] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 79.730] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 79.730] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 79.730] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 79.730] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 79.730] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 79.730] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 79.735] (II) modeset(0): EDID for output DVI-D-1
[ 79.735] (II) modeset(0): EDID for output DP-1
[ 79.735] (II) modeset(0): Output VGA-1 disconnected
[ 79.735] (II) modeset(0): Output LVDS-1 connected
[ 79.736] (II) modeset(0): Output DVI-D-1 disconnected
[ 79.736] (II) modeset(0): Output DP-1 disconnected
[ 79.736] (II) modeset(0): Using exact sizes for initial modes
[ 79.736] (II) modeset(0): Output LVDS-1 using initial mode 1024x600 +0+0
[ 79.736] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 79.736] (==) modeset(0): DPI set to (96, 96)
[ 79.736] (II) Loading sub module "fb"
[ 79.736] (II) LoadModule: "fb"
[ 79.849] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 79.876] (II) Module fb: vendor="X.Org Foundation"
[ 79.876] compiled for 1.19.6, module version = 1.0.0
[ 79.876] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.876] (==) Depth 24 pixmap format is 32 bpp
[ 79.878] (==) modeset(0): Backing store enabled
[ 79.878] (==) modeset(0): Silken mouse enabled
[ 79.879] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 79.880] (==) modeset(0): DPMS enabled
[ 79.880] (--) RandR disabled
[ 79.896] (II) SELinux: Disabled on system
[ 79.898] (II) AIGLX: Screen 0 is not DRI2 capable
[ 79.898] (EE) AIGLX: reverting to software rendering
[ 79.907] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 79.910] (II) IGLX: Loaded and initialized swrast
[ 79.910] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 79.911] (II) modeset(0): Damage tracking initialized
[ 79.911] (II) modeset(0): Setting screen physical size to 270 x 158
[ 80.758] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 80.758] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.758] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 80.758] (II) LoadModule: "libinput"
[ 80.759] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 80.842] (II) Module libinput: vendor="X.Org Foundation"
[ 80.842] compiled for 1.19.3, module version = 0.26.0
[ 80.842] Module class: X.Org XInput Driver
[ 80.842] ABI class: X.Org XInput driver, version 24.1
[ 80.842] (II) Using input driver 'libinput' for 'Power Button'
[ 80.844] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 19 paused 0
[ 80.845] (**) Power Button: always reports core events
[ 80.845] (**) Option "Device" "/dev/input/event7"
[ 80.845] (**) Option "_source" "server/udev"
[ 80.847] (II) event7 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.848] (II) event7 - (II) Power Button: (II) device is a keyboard
[ 80.848] (II) event7 - (II) Power Button: (II) device removed
[ 80.848] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event7"
[ 80.848] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.848] (**) Option "xkb_model" "pc105"
[ 80.848] (**) Option "xkb_layout" "us"
[ 80.851] (II) event7 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.851] (II) event7 - (II) Power Button: (II) device is a keyboard
[ 80.853] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 80.853] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.853] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 80.853] (II) Using input driver 'libinput' for 'Video Bus'
[ 80.856] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 22 paused 0
[ 80.856] (**) Video Bus: always reports core events
[ 80.856] (**) Option "Device" "/dev/input/event10"
[ 80.856] (**) Option "_source" "server/udev"
[ 80.858] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 80.858] (II) event10 - (II) Video Bus: (II) device is a keyboard
[ 80.858] (II) event10 - (II) Video Bus: (II) device removed
[ 80.859] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event10"
[ 80.859] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.859] (**) Option "xkb_model" "pc105"
[ 80.859] (**) Option "xkb_layout" "us"
[ 80.861] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 80.861] (II) event10 - (II) Video Bus: (II) device is a keyboard
[ 80.863] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 80.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.863] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 80.863] (II) Using input driver 'libinput' for 'Power Button'
[ 80.866] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 23 paused 0
[ 80.866] (**) Power Button: always reports core events
[ 80.866] (**) Option "Device" "/dev/input/event4"
[ 80.866] (**) Option "_source" "server/udev"
[ 80.868] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.868] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 80.868] (II) event4 - (II) Power Button: (II) device removed
[ 80.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4"
[ 80.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 80.869] (**) Option "xkb_model" "pc105"
[ 80.869] (**) Option "xkb_layout" "us"
[ 80.871] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 80.871] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 80.873] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 80.873] (II) No input driver specified, ignoring this device.
[ 80.873] (II) This device may have been added with another device file.
[ 80.874] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 80.874] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.874] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 80.874] (II) Using input driver 'libinput' for 'Sleep Button'
[ 80.877] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 24 paused 0
[ 80.877] (**) Sleep Button: always reports core events
[ 80.877] (**) Option "Device" "/dev/input/event5"
[ 80.877] (**) Option "_source" "server/udev"
[ 80.879] (II) event5 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 80.880] (II) event5 - (II) Sleep Button: (II) device is a keyboard
[ 80.880] (II) event5 - (II) Sleep Button: (II) device removed
[ 80.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5"
[ 80.880] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 80.880] (**) Option "xkb_model" "pc105"
[ 80.880] (**) Option "xkb_layout" "us"
[ 80.882] (II) event5 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 80.882] (II) event5 - (II) Sleep Button: (II) device is a keyboard
[ 80.885] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event13)
[ 80.885] (II) No input driver specified, ignoring this device.
[ 80.885] (II) This device may have been added with another device file.
[ 80.886] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 80.886] (II) No input driver specified, ignoring this device.
[ 80.886] (II) This device may have been added with another device file.
[ 80.887] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event14)
[ 80.888] (II) No input driver specified, ignoring this device.
[ 80.888] (II) This device may have been added with another device file.
[ 80.889] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event15)
[ 80.889] (II) No input driver specified, ignoring this device.
[ 80.889] (II) This device may have been added with another device file.
[ 80.891] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 80.891] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 80.891] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 80.891] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 80.894] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[ 80.895] (**) Logitech USB Receiver: always reports core events
[ 80.895] (**) Option "Device" "/dev/input/event1"
[ 80.895] (**) Option "_source" "server/udev"
[ 80.897] (II) event1 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[ 80.897] (II) event1 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.898] (II) event1 - (II) Logitech USB Receiver: (II) device removed
[ 80.898] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:046D:C534.0001/input/input7/event1"
[ 80.898] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 80.898] (**) Option "xkb_model" "pc105"
[ 80.898] (**) Option "xkb_layout" "us"
[ 80.900] (II) event1 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[ 80.901] (II) event1 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.903] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 80.903] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 80.903] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 80.907] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 26 paused 0
[ 80.907] (**) Logitech USB Receiver: always reports core events
[ 80.907] (**) Option "Device" "/dev/input/event2"
[ 80.907] (**) Option "_source" "server/udev"
[ 80.909] (II) event2 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard Mouse
[ 80.910] (II) event2 - (II) Logitech USB Receiver: (II) device is a pointer
[ 80.910] (II) event2 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.910] (II) event2 - (II) Logitech USB Receiver: (II) device removed
[ 80.910] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[ 80.910] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:046D:C534.0002/input/input8/event2"
[ 80.910] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 80.911] (**) Option "AccelerationScheme" "none"
[ 80.912] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 80.912] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 80.912] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 80.914] (II) event2 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard Mouse
[ 80.914] (II) event2 - (II) Logitech USB Receiver: (II) device is a pointer
[ 80.914] (II) event2 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 80.916] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 80.916] (II) No input driver specified, ignoring this device.
[ 80.916] (II) This device may have been added with another device file.
[ 80.918] (II) config/udev: Adding input device 1.3M HD WebCam: 1.3M HD WebCam (/dev/input/event11)
[ 80.918] (**) 1.3M HD WebCam: 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 80.918] (**) 1.3M HD WebCam: 1.3M HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 80.918] (II) Using input driver 'libinput' for '1.3M HD WebCam: 1.3M HD WebCam'
[ 80.922] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 27 paused 0
[ 80.922] (**) 1.3M HD WebCam: 1.3M HD WebCam: always reports core events
[ 80.922] (**) Option "Device" "/dev/input/event11"
[ 80.922] (**) Option "_source" "server/udev"
[ 80.924] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) is tagged by udev as: Keyboard
[ 80.924] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device is a keyboard
[ 80.924] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device removed
[ 80.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-3/3-3:1.0/input/input19/event11"
[ 80.925] (II) XINPUT: Adding extended input device "1.3M HD WebCam: 1.3M HD WebCam" (type: KEYBOARD, id 12)
[ 80.925] (**) Option "xkb_model" "pc105"
[ 80.925] (**) Option "xkb_layout" "us"
[ 80.927] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) is tagged by udev as: Keyboard
[ 80.927] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device is a keyboard
[ 80.929] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.929] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.929] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 80.929] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 80.933] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[ 80.933] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.933] (**) Option "Device" "/dev/input/event0"
[ 80.933] (**) Option "_source" "server/udev"
[ 80.935] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 80.935] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 80.935] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 80.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 80.936] (**) Option "xkb_model" "pc105"
[ 80.936] (**) Option "xkb_layout" "us"
[ 80.938] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 80.938] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 80.940] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event3)
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 80.940] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 80.940] (II) LoadModule: "synaptics"
[ 80.941] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.962] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.962] compiled for 1.19.0, module version = 1.9.0
[ 80.962] Module class: X.Org XInput Driver
[ 80.962] ABI class: X.Org XInput driver, version 24.1
[ 80.962] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 80.965] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0
[ 80.965] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.965] (**) Option "Device" "/dev/input/event3"
[ 80.966] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2320 (res 31)
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 928 (res 31)
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 80.966] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 80.967] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.967] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 80.967] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/event3"
[ 80.967] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 80.967] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.967] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 80.967] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.080
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 80.968] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 80.969] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 80.970] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 80.970] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.971] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 80.971] (II) No input driver specified, ignoring this device.
[ 80.971] (II) This device may have been added with another device file.
[ 80.972] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[ 80.972] (II) No input driver specified, ignoring this device.
[ 80.972] (II) This device may have been added with another device file.
[ 80.973] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[ 80.973] (II) No input driver specified, ignoring this device.
[ 80.973] (II) This device may have been added with another device file.
[ 80.974] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[ 80.974] (II) No input driver specified, ignoring this device.
[ 80.974] (II) This device may have been added with another device file.
[ 80.975] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[ 80.975] (II) No input driver specified, ignoring this device.
[ 80.975] (II) This device may have been added with another device file.
[ 80.976] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event9)
[ 80.976] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 80.976] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 80.976] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[ 80.980] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 30 paused 0
[ 80.980] (**) Acer WMI hotkeys: always reports core events
[ 80.980] (**) Option "Device" "/dev/input/event9"
[ 80.980] (**) Option "_source" "server/udev"
[ 80.983] (II) event9 - (II) Acer WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 80.983] (II) event9 - (II) Acer WMI hotkeys: (II) device is a keyboard
[ 80.983] (II) event9 - (II) Acer WMI hotkeys: (II) device removed
[ 80.983] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event9"
[ 80.983] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[ 80.983] (**) Option "xkb_model" "pc105"
[ 80.983] (**) Option "xkb_layout" "us"
[ 80.985] (II) event9 - (II) Acer WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 80.986] (II) event9 - (II) Acer WMI hotkeys: (II) device is a keyboard
[ 80.986] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[ 80.986] (II) No input driver specified, ignoring this device.
[ 80.986] (II) This device may have been added with another device file.
[ 80.987] (II) config/udev: Adding input device (unnamed) (/dev/console)
[ 80.987] (II) No input driver specified, ignoring this device.
[ 80.987] (II) This device may have been added with another device file.
[ 80.987] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[ 80.988] (II) No input driver specified, ignoring this device.
[ 80.988] (II) This device may have been added with another device file.
[ 80.988] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[ 80.988] (II) No input driver specified, ignoring this device.
[ 80.989] (II) This device may have been added with another device file.
[ 80.989] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[ 80.989] (II) No input driver specified, ignoring this device.
[ 80.989] (II) This device may have been added with another device file.
[ 80.990] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[ 80.990] (II) No input driver specified, ignoring this device.
[ 80.990] (II) This device may have been added with another device file.
[ 80.990] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[ 80.990] (II) No input driver specified, ignoring this device.
[ 80.990] (II) This device may have been added with another device file.
[ 80.991] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[ 80.991] (II) No input driver specified, ignoring this device.
[ 80.991] (II) This device may have been added with another device file.
[ 80.992] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[ 80.992] (II) No input driver specified, ignoring this device.
[ 80.992] (II) This device may have been added with another device file.
[ 80.992] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[ 80.992] (II) No input driver specified, ignoring this device.
[ 80.993] (II) This device may have been added with another device file.
[ 80.993] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[ 80.993] (II) No input driver specified, ignoring this device.
[ 80.993] (II) This device may have been added with another device file.
[ 80.994] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[ 80.994] (II) No input driver specified, ignoring this device.
[ 80.994] (II) This device may have been added with another device file.
[ 80.994] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[ 80.994] (II) No input driver specified, ignoring this device.
[ 80.994] (II) This device may have been added with another device file.
[ 80.995] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[ 80.995] (II) No input driver specified, ignoring this device.
[ 80.995] (II) This device may have been added with another device file.
[ 80.996] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[ 80.996] (II) No input driver specified, ignoring this device.
[ 80.996] (II) This device may have been added with another device file.
[ 80.996] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[ 80.996] (II) No input driver specified, ignoring this device.
[ 80.996] (II) This device may have been added with another device file.
[ 80.997] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[ 80.997] (II) No input driver specified, ignoring this device.
[ 80.997] (II) This device may have been added with another device file.
[ 80.998] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[ 80.998] (II) No input driver specified, ignoring this device.
[ 80.998] (II) This device may have been added with another device file.
[ 80.998] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[ 80.998] (II) No input driver specified, ignoring this device.
[ 80.998] (II) This device may have been added with another device file.
[ 80.999] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[ 80.999] (II) No input driver specified, ignoring this device.
[ 80.999] (II) This device may have been added with another device file.
[ 80.999] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[ 80.999] (II) No input driver specified, ignoring this device.
[ 80.999] (II) This device may have been added with another device file.
[ 81.000] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[ 81.000] (II) No input driver specified, ignoring this device.
[ 81.000] (II) This device may have been added with another device file.
[ 81.001] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[ 81.001] (II) No input driver specified, ignoring this device.
[ 81.001] (II) This device may have been added with another device file.
[ 81.001] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[ 81.001] (II) No input driver specified, ignoring this device.
[ 81.001] (II) This device may have been added with another device file.
[ 81.002] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[ 81.002] (II) No input driver specified, ignoring this device.
[ 81.002] (II) This device may have been added with another device file.
[ 81.002] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[ 81.002] (II) No input driver specified, ignoring this device.
[ 81.002] (II) This device may have been added with another device file.
[ 81.003] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[ 81.003] (II) No input driver specified, ignoring this device.
[ 81.003] (II) This device may have been added with another device file.
[ 81.003] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[ 81.003] (II) No input driver specified, ignoring this device.
[ 81.003] (II) This device may have been added with another device file.
[ 81.004] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[ 81.004] (II) No input driver specified, ignoring this device.
[ 81.004] (II) This device may have been added with another device file.
[ 81.006] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[ 81.006] (II) No input driver specified, ignoring this device.
[ 81.006] (II) This device may have been added with another device file.
[ 81.007] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[ 81.007] (II) No input driver specified, ignoring this device.
[ 81.007] (II) This device may have been added with another device file.
[ 81.008] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[ 81.008] (II) No input driver specified, ignoring this device.
[ 81.009] (II) This device may have been added with another device file.
[ 81.009] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[ 81.009] (II) No input driver specified, ignoring this device.
[ 81.009] (II) This device may have been added with another device file.
[ 81.010] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[ 81.010] (II) No input driver specified, ignoring this device.
[ 81.010] (II) This device may have been added with another device file.
[ 81.010] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[ 81.010] (II) No input driver specified, ignoring this device.
[ 81.011] (II) This device may have been added with another device file.
[ 81.011] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[ 81.011] (II) No input driver specified, ignoring this device.
[ 81.011] (II) This device may have been added with another device file.
[ 81.012] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[ 81.012] (II) No input driver specified, ignoring this device.
[ 81.012] (II) This device may have been added with another device file.
[ 81.012] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[ 81.012] (II) No input driver specified, ignoring this device.
[ 81.012] (II) This device may have been added with another device file.
[ 81.013] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[ 81.013] (II) No input driver specified, ignoring this device.
[ 81.013] (II) This device may have been added with another device file.
[ 81.013] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[ 81.013] (II) No input driver specified, ignoring this device.
[ 81.013] (II) This device may have been added with another device file.
[ 81.014] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[ 81.014] (II) No input driver specified, ignoring this device.
[ 81.014] (II) This device may have been added with another device file.
[ 81.015] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[ 81.015] (II) No input driver specified, ignoring this device.
[ 81.015] (II) This device may have been added with another device file.
[ 81.015] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[ 81.015] (II) No input driver specified, ignoring this device.
[ 81.015] (II) This device may have been added with another device file.
[ 81.016] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[ 81.016] (II) No input driver specified, ignoring this device.
[ 81.016] (II) This device may have been added with another device file.
[ 81.016] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[ 81.016] (II) No input driver specified, ignoring this device.
[ 81.016] (II) This device may have been added with another device file.
[ 81.017] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[ 81.017] (II) No input driver specified, ignoring this device.
[ 81.017] (II) This device may have been added with another device file.
[ 81.017] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[ 81.017] (II) No input driver specified, ignoring this device.
[ 81.017] (II) This device may have been added with another device file.
[ 81.018] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[ 81.018] (II) No input driver specified, ignoring this device.
[ 81.018] (II) This device may have been added with another device file.
[ 81.018] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[ 81.019] (II) No input driver specified, ignoring this device.
[ 81.019] (II) This device may have been added with another device file.
[ 81.019] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[ 81.019] (II) No input driver specified, ignoring this device.
[ 81.019] (II) This device may have been added with another device file.
[ 81.020] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[ 81.020] (II) No input driver specified, ignoring this device.
[ 81.020] (II) This device may have been added with another device file.
[ 81.020] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[ 81.020] (II) No input driver specified, ignoring this device.
[ 81.020] (II) This device may have been added with another device file.
[ 81.021] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[ 81.021] (II) No input driver specified, ignoring this device.
[ 81.021] (II) This device may have been added with another device file.
[ 81.021] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[ 81.021] (II) No input driver specified, ignoring this device.
[ 81.022] (II) This device may have been added with another device file.
[ 81.022] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[ 81.022] (II) No input driver specified, ignoring this device.
[ 81.022] (II) This device may have been added with another device file.
[ 81.023] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[ 81.023] (II) No input driver specified, ignoring this device.
[ 81.023] (II) This device may have been added with another device file.
[ 81.023] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[ 81.023] (II) No input driver specified, ignoring this device.
[ 81.023] (II) This device may have been added with another device file.
[ 81.024] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[ 81.024] (II) No input driver specified, ignoring this device.
[ 81.024] (II) This device may have been added with another device file.
[ 81.024] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[ 81.025] (II) No input driver specified, ignoring this device.
[ 81.025] (II) This device may have been added with another device file.
[ 81.025] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[ 81.025] (II) No input driver specified, ignoring this device.
[ 81.025] (II) This device may have been added with another device file.
[ 81.026] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[ 81.026] (II) No input driver specified, ignoring this device.
[ 81.026] (II) This device may have been added with another device file.
[ 81.026] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[ 81.026] (II) No input driver specified, ignoring this device.
[ 81.026] (II) This device may have been added with another device file.
[ 81.027] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[ 81.027] (II) No input driver specified, ignoring this device.
[ 81.027] (II) This device may have been added with another device file.
[ 81.027] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[ 81.027] (II) No input driver specified, ignoring this device.
[ 81.027] (II) This device may have been added with another device file.
[ 81.028] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[ 81.028] (II) No input driver specified, ignoring this device.
[ 81.028] (II) This device may have been added with another device file.
[ 81.029] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[ 81.029] (II) No input driver specified, ignoring this device.
[ 81.029] (II) This device may have been added with another device file.
[ 81.029] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[ 81.029] (II) No input driver specified, ignoring this device.
[ 81.029] (II) This device may have been added with another device file.
[ 81.030] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[ 81.030] (II) No input driver specified, ignoring this device.
[ 81.030] (II) This device may have been added with another device file.
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 81.033] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 81.033] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 81.033] (II) systemd-logind: returning pre-existing fd for /dev/input/event2 13:66
[ 81.033] (**) Logitech USB Receiver: always reports core events
[ 81.033] (**) Option "Device" "/dev/input/event2"
[ 81.033] (**) Option "_source" "_driver/libinput"
[ 81.033] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[ 81.034] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:046D:C534.0002/input/input8/event2"
[ 81.034] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 16)
[ 81.034] (**) Option "xkb_model" "pc105"
[ 81.034] (**) Option "xkb_layout" "us"
[ 83.607] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 85.700] (II) modeset(0): EDID vendor "AUO", prod id 25042
[ 85.700] (II) modeset(0): Printing DDC gathered Modelines:
[ 85.700] (II) modeset(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP)
[ 85.804] (II) modeset(0): EDID vendor "AUO", prod id 25042
[ 85.804] (II) modeset(0): Printing DDC gathered Modelines:
[ 85.804] (II) modeset(0): Modeline "1024x600"x0.0 49.80 1024 1072 1104 1338 600 602 608 620 -hsync -vsync (37.2 kHz eP)
[ 468.523] (**) Option "fd" "19"
[ 468.523] (II) event7 - (II) Power Button: (II) device removed
[ 468.524] (**) Option "fd" "22"
[ 468.524] (II) event10 - (II) Video Bus: (II) device removed
[ 468.530] (**) Option "fd" "23"
[ 468.530] (II) event4 - (II) Power Button: (II) device removed
[ 468.530] (**) Option "fd" "24"
[ 468.531] (II) event5 - (II) Sleep Button: (II) device removed
[ 468.531] (**) Option "fd" "25"
[ 468.531] (II) event1 - (II) Logitech USB Receiver: (II) device removed
[ 468.532] (**) Option "fd" "26"
[ 468.532] (**) Option "fd" "27"
[ 468.532] (II) event11 - (II) 1.3M HD WebCam: 1.3M HD WebCam: (II) device removed
[ 468.533] (**) Option "fd" "28"
[ 468.533] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 468.534] (**) Option "fd" "30"
[ 468.534] (II) event9 - (II) Acer WMI hotkeys: (II) device removed
[ 468.535] (**) Option "fd" "26"
[ 468.535] (II) event2 - (II) Logitech USB Receiver: (II) device removed
[ 468.537] (II) UnloadModule: "libinput"
[ 468.537] (II) systemd-logind: not releasing fd for 13:66, still in use
[ 468.537] (II) UnloadModule: "libinput"
[ 468.537] (II) systemd-logind: releasing fd for 13:73
[ 468.556] (II) UnloadModule: "synaptics"
[ 468.556] (II) systemd-logind: releasing fd for 13:67
[ 468.616] (II) UnloadModule: "libinput"
[ 468.616] (II) systemd-logind: releasing fd for 13:64
[ 468.632] (II) UnloadModule: "libinput"
[ 468.632] (II) systemd-logind: releasing fd for 13:75
[ 468.664] (II) UnloadModule: "libinput"
[ 468.664] (II) systemd-logind: releasing fd for 13:66
[ 468.684] (II) UnloadModule: "libinput"
[ 468.684] (II) systemd-logind: releasing fd for 13:65
[ 468.700] (II) UnloadModule: "libinput"
[ 468.700] (II) systemd-logind: releasing fd for 13:69
[ 468.716] (II) UnloadModule: "libinput"
[ 468.716] (II) systemd-logind: releasing fd for 13:68
[ 468.732] (II) UnloadModule: "libinput"
[ 468.732] (II) systemd-logind: releasing fd for 13:74
[ 468.753] (II) UnloadModule: "libinput"
[ 468.753] (II) systemd-logind: releasing fd for 13:71
[ 469.755] (II) Server terminated successfully (0). Closing log file.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19352298
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22630288
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19486602
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22654383
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19330253
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22644158
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=19347516
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event6
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=reliable
E: LIBINPUT_DEVICE_GROUP=19/0/5:PNP0C0D/button
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22633560
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19339125
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3:PNP0C0E/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22639132
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=22292191
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input18/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input18/event12
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22659524
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0269e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#1/beep0"
E: PRODUCT=1/10ec/269/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=21978828
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=1/10ec/269:card0/codec#1/beep0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=22651790
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=22648269
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event13
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22714532
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=22649579
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event14
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0:ALSA
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22709125
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=1000000000007 ff800000000007ff febeffdfffefffff fffffffffffffffe
E: LED=1f
E: MODALIAS=input:b0003v046DpC534e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.0-1/input0"
E: PRODUCT=3/46d/c534/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6940581
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Receiver-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd /dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:046D:C534.0001/input/input7/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c534:usb-0000:00:1d.0-1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22634094
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c000 677bfad941dfed 9ed68000004400 10000002
E: MODALIAS=input:b0003v046DpC534e0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E7,E8,E9,EA,EB,F0,F1,F4,100,110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,250,251,r0,1,6,7,8,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.0-1/input1"
E: PRODUCT=3/46d/c534/111
E: PROP=0
E: REL=1c3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6943810
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/event2
N: input/event2
S: input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c534:usb-0000:00:1d.0-1
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22638002
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-if01-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-if01-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:046D:C534.0002/input/input8/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c534
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=2900
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=21111647
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=1.3M_HD_WebCam
E: ID_MODEL_ENC=1.3M\x20HD\x20WebCam
E: ID_MODEL_ID=d250
E: ID_PATH=pci-0000:00:1d.7-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_3_1_0
E: ID_REVISION=0102
E: ID_SERIAL=SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02
E: ID_SERIAL_SHORT=HF1316-A821-HN01-VA-R01.00.02
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SuYin
E: ID_VENDOR_ENC=SuYin
E: ID_VENDOR_ID=064e
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v064EpD250e0102-e0,1,kD4,ramlsfw
E: NAME="1.3M HD WebCam: 1.3M HD WebCam"
E: PHYS="usb-0000:00:1d.7-3/button"
E: PRODUCT=3/64e/d250/102
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=22982162
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22/event15
N: input/event15
S: input/by-id/usb-SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.7-usb-0:3:1.0-event /dev/input/by-id/usb-SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02-event-if00
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input22/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=1.3M_HD_WebCam
E: ID_MODEL_ENC=1.3M\x20HD\x20WebCam
E: ID_MODEL_ID=d250
E: ID_PATH=pci-0000:00:1d.7-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_3_1_0
E: ID_REVISION=0102
E: ID_SERIAL=SuYin_1.3M_HD_WebCam_HF1316-A821-HN01-VA-R01.00.02
E: ID_SERIAL_SHORT=HF1316-A821-HN01-VA-R01.00.02
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SuYin
E: ID_VENDOR_ENC=SuYin
E: ID_VENDOR_ID=064e
E: LIBINPUT_DEVICE_GROUP=3/64e/d250:usb-0000:00:1d.7-3/button
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=23049287
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=10000 c020000000000 0 0 700f02000003 3802078f870f401 febfffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8D,8E,8F,94,95,96,9B,9C,9D,9E,9F,A3,A4,A5,A6,AD,B7,B8,B9,C0,C1,D9,E0,E1,E2,E3,EC,ED,EE,1A9,1B2,1B3,1D0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=6039958
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_86=wlan
E: KEYBOARD_KEY_a5=help
E: KEYBOARD_KEY_a6=setup
E: KEYBOARD_KEY_a7=battery
E: KEYBOARD_KEY_a9=switchvideomode
E: KEYBOARD_KEY_b2=www
E: KEYBOARD_KEY_b3=euro
E: KEYBOARD_KEY_b4=dollar
E: KEYBOARD_KEY_ce=brightnessup
E: KEYBOARD_KEY_d4=bluetooth
E: KEYBOARD_KEY_d5=wlan
E: KEYBOARD_KEY_d6=wlan
E: KEYBOARD_KEY_d7=bluetooth
E: KEYBOARD_KEY_d8=bluetooth
E: KEYBOARD_KEY_d9=brightnessup
E: KEYBOARD_KEY_ee=brightnessup
E: KEYBOARD_KEY_ef=brightnessdown
E: KEYBOARD_KEY_f1=f22
E: KEYBOARD_KEY_f2=f23
E: KEYBOARD_KEY_f3=prog2
E: KEYBOARD_KEY_f4=prog1
E: KEYBOARD_KEY_f5=presentation
E: KEYBOARD_KEY_f6=power
E: KEYBOARD_KEY_f8=fn
E: KEYBOARD_KEY_f9=prog1
E: LIBINPUT_ATTR_KEYBOARD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22632448
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio2/input/input6
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio2/input/input6
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ee0000-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="ETPS/2 Elantech Touchpad"
E: PHYS="isa0060/serio2/input0"
E: PRODUCT=11/2/e/0
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=7074760
P: /devices/platform/i8042/serio2/input/input6/event3
N: input/event3
S: input/by-path/platform-i8042-serio-2-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/platform/i8042/serio2/input/input6/event3
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=29
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=74
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: LIBINPUT_ATTR_PRESSURE_RANGE=10:8
E: LIBINPUT_ATTR_RESOLUTION_HINT=31x31
E: LIBINPUT_DEVICE_GROUP=11/2/e:isa0060/serio2
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=22700147
P: /devices/platform/i8042/serio2/input/input6/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-2-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio2/input/input6/mouse1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=19242090
P: /devices/platform/pcspkr/input/input15
E: DEVPATH=/devices/platform/pcspkr/input/input15
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19465987
P: /devices/platform/pcspkr/input/input15/event8
N: input/event8
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/pcspkr/input/input15/event8
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=22646836
P: /devices/virtual/input/input17
E: DEVPATH=/devices/virtual/input/input17
E: EV=13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=1c0000 0 0 0 0 1600800000c00 300000 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k94,95,CA,CB,E3,ED,EE,F0,212,213,214,ram4,lsfw
E: MSC=10
E: NAME="Acer WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=20677096
P: /devices/virtual/input/input17/event10
N: input/event10
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/virtual/input/input17/event10
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: LIBINPUT_DEVICE_GROUP=19/0/0:wmi
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=22641723
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.14.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8), LANGUAGE=en_IN:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages xserver-xorg depends on:
ii x11-xkb-utils 7.7+3+b1
ii xkb-data 2.19-1.1
ii xserver-xorg-core 2:1.19.6-1
ii xserver-xorg-input-all 1:7.7+19
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.10.5-1
ii xserver-xorg-input-libinput [xorg-driver-input] 0.26.0-1
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.2-1+b1
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.9.0-1+b1
ii xserver-xorg-input-wacom [xorg-driver-input] 0.34.99.1-1
ii xserver-xorg-video-all 1:7.7+19
ii xserver-xorg-video-amdgpu [xorg-driver-video] 1.4.0-1
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.10.0-1
ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.3-1+b2
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b5
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.99.917+git20171229-1
ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.5-1+b2
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.5-1
ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.9-1+b2
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.15-2
ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.6.0-3
ii xserver-xorg-video-qxl [xorg-driver-video] 0.1.5-2
ii xserver-xorg-video-r128 [xorg-driver-video] 6.10.2-1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.10.0-1
ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.9-1
ii xserver-xorg-video-siliconmotion [xorg-driver-vid 1:1.7.9-2
ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.7-1
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.7-1
ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.8-1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.4-1+b2
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.2.1-1+b1
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 17.3.3-1
ii xserver-xorg-legacy 2:1.19.6-1
xserver-xorg suggests no packages.
-- no debconf information
Reply to: