--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-video-openchrome: Permanent fix for HP 2133 PCIe WLAN not working
- From: hp_mini2133_user <casla04@hotmail.com>
- Date: Sat, 27 May 2017 06:32:46 -0300
- Message-id: <149587756636.1193.15649335561858440523.reportbug@vonbergen-zm-backup>
Package: xserver-xorg-video-openchrome
Version: 1:0.5.0-3
Severity: important
Tags: upstream
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
After installing the graphics driver and the network drivers, I was unable to access a wifi network.
* What exactly did you do (or not do) that was effective (or
ineffective)?
I install packages xserver-xorg-video-openchrome, firmware-linux-nonfree and firmware-b43-installer.
* What was the outcome of this action?
I couldn't access a wlan network.
* What outcome did you expect instead?
I expect to connect to a wifi netowork. I'm using an hp mini 2133 with a broadcom 4312 lp phy card. I think that my issue is related with the bug: https://anonscm.debian.org/git/pkg-xorg/driver/xserver-xorg-video-openchrome.git/commit/?id=1f7898969a38f3e350871168338deb1dfbb1cc18.
*** End of the template - remove these template lines ***
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] [1106:3371] (rev 01)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.9.0-3-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170415 (Debian 6.3.0-14) ) #1 SMP Debian 4.9.25-1 (2017-05-02)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 41630 May 27 06:23 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 25.557]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 25.557] X Protocol Version 11, Revision 0
[ 25.557] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 25.558] Current Operating System: Linux vonbergen-zm-backup 4.9.0-3-686-pae #1 SMP Debian 4.9.25-1 (2017-05-02) i686
[ 25.558] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-686-pae root=/dev/mapper/vonbergen--zm--backup--vg-root ro quiet
[ 25.558] Build Date: 03 March 2017 03:15:35PM
[ 25.558] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 25.558] Current version of pixman: 0.34.0
[ 25.558] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.558] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.559] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 27 06:00:28 2017
[ 25.891] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.969] (==) No Layout section. Using the first Screen section.
[ 25.969] (==) No screen section available. Using defaults.
[ 25.969] (**) |-->Screen "Default Screen Section" (0)
[ 25.969] (**) | |-->Monitor "<default monitor>"
[ 25.998] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.998] (==) Automatically adding devices
[ 25.998] (==) Automatically enabling devices
[ 25.998] (==) Automatically adding GPU devices
[ 25.998] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 26.168] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 26.168] Entry deleted from font path.
[ 26.227] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 26.228] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.228] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.228] (II) Loader magic: 0x802db720
[ 26.228] (II) Module ABI versions:
[ 26.228] X.Org ANSI C Emulation: 0.4
[ 26.228] X.Org Video Driver: 23.0
[ 26.228] X.Org XInput driver : 24.1
[ 26.228] X.Org Server Extension : 10.0
[ 26.233] (++) using VT number 7
[ 26.234] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 26.240] (--) PCI:*(0:1:0:0) 1106:3371:103c:3030 rev 1, Mem @ 0xd0000000/134217728, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 26.260] (II) LoadModule: "glx"
[ 26.280] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.427] (II) Module glx: vendor="X.Org Foundation"
[ 26.427] compiled for 1.19.2, module version = 1.0.0
[ 26.428] ABI class: X.Org Server Extension, version 10.0
[ 26.428] (==) Matched openchrome as autoconfigured driver 0
[ 26.428] (==) Matched modesetting as autoconfigured driver 1
[ 26.428] (==) Matched fbdev as autoconfigured driver 2
[ 26.428] (==) Matched vesa as autoconfigured driver 3
[ 26.428] (==) Assigned the driver to the xf86ConfigLayout
[ 26.428] (II) LoadModule: "openchrome"
[ 26.457] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[ 26.480] (II) Module openchrome: vendor="http://www.freedesktop.org/wiki/Openchrome/";
[ 26.480] compiled for 1.19.1, module version = 0.5.0
[ 26.480] Module class: X.Org Video Driver
[ 26.480] ABI class: X.Org Video Driver, version 23.0
[ 26.480] (II) LoadModule: "modesetting"
[ 26.481] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 26.483] (II) Module modesetting: vendor="X.Org Foundation"
[ 26.483] compiled for 1.19.2, module version = 1.19.2
[ 26.483] Module class: X.Org Video Driver
[ 26.484] ABI class: X.Org Video Driver, version 23.0
[ 26.484] (II) LoadModule: "fbdev"
[ 26.484] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.507] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.508] compiled for 1.19.0, module version = 0.4.4
[ 26.508] Module class: X.Org Video Driver
[ 26.508] ABI class: X.Org Video Driver, version 23.0
[ 26.508] (II) LoadModule: "vesa"
[ 26.508] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.510] (II) Module vesa: vendor="X.Org Foundation"
[ 26.510] compiled for 1.19.0, module version = 2.3.4
[ 26.510] Module class: X.Org Video Driver
[ 26.510] ABI class: X.Org Video Driver, version 23.0
[ 26.510] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
[ 26.511] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 26.511] (II) FBDEV: driver for framebuffer: fbdev
[ 26.511] (II) VESA: driver for VESA chipsets: vesa
[ 26.519] (!!) VIA Technologies does not support this driver in any way.
[ 26.519] (!!) For support, please refer to http://www.freedesktop.org/wiki/Openchrome/.
[ 26.519] (!!) (openchrome 0.5.0 release)
[ 26.519] (WW) Falling back to old probe method for modesetting
[ 26.519] (EE) open /dev/dri/card0: No such file or directory
[ 26.519] (WW) Falling back to old probe method for fbdev
[ 26.519] (II) Loading sub module "fbdevhw"
[ 26.519] (II) LoadModule: "fbdevhw"
[ 26.527] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 26.531] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 26.531] compiled for 1.19.2, module version = 0.0.2
[ 26.532] ABI class: X.Org Video Driver, version 23.0
[ 26.532] (EE) open /dev/fb0: No such file or directory
[ 26.532] (WW) Falling back to old probe method for vesa
[ 26.532] (II) CHROME(0): viaPreInit
[ 26.532] (II) CHROME(0): VIAGetRec
[ 26.532] (--) CHROME(0): Chipset: P4M900 / VN896 / CN896
[ 26.533] (--) CHROME(0): Chipset revision: 0
[ 26.709] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[ 26.709] (II) Loading sub module "vgahw"
[ 26.709] (II) LoadModule: "vgahw"
[ 26.710] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 26.711] (II) Module vgahw: vendor="X.Org Foundation"
[ 26.711] compiled for 1.19.2, module version = 0.1.0
[ 26.711] ABI class: X.Org Video Driver, version 23.0
[ 26.711] (--) CHROME(0): Probed amount of VideoRAM = 131072 kB
[ 26.712] (II) CHROME(0): Entered viaMapMMIO.
[ 26.712] (--) CHROME(0): Mapping MMIO at address 0xFC000000 with size 52 KB.
[ 26.712] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xFC200000 with size 2048 KB.
[ 26.712] (--) CHROME(0): Mapping the frame buffer at address 0xD0000000 with size 131072 KB.
[ 26.714] (--) CHROME(0): Frame buffer start address: 0xaea05000, free start: 0x0 end: 0x8000000
[ 26.714] (II) CHROME(0): Entered viaMMIOEnable.
[ 26.714] (II) CHROME(0): Exiting viaMMIOEnable.
[ 26.714] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 26.715] (II) CHROME(0): Exiting viaMapMMIO.
[ 26.715] (II) CHROME(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.715] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[ 26.715] (==) CHROME(0): RGB weight 888
[ 26.715] (==) CHROME(0): Default visual is TrueColor
[ 26.715] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[ 26.715] (==) CHROME(0): Shadow framebuffer is disabled.
[ 26.715] (==) CHROME(0): Hardware acceleration is enabled.
[ 26.715] (==) CHROME(0): Using EXA acceleration architecture.
[ 26.715] (==) CHROME(0): EXA composite acceleration enabled.
[ 26.715] (==) CHROME(0): EXA scratch area size is 4096 kB.
[ 26.715] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[ 26.715] (==) CHROME(0): GPU virtual command queue will be enabled.
[ 26.715] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 26.715] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled.
[ 26.715] (==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
[ 26.715] (==) CHROME(0): Xv Bandwidth check is enabled.
[ 26.715] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[ 26.715] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[ 26.715] (==) CHROME(0): TV dotCrawl is disabled.
[ 26.715] (==) CHROME(0): TV deflicker is set to 0.
[ 26.715] (==) CHROME(0): No default TV type is set.
[ 26.716] (==) CHROME(0): No default TV output signal type is set.
[ 26.716] (==) CHROME(0): No default TV output port is set.
[ 26.716] (==) CHROME(0): Will not print VGA registers.
[ 26.716] (==) CHROME(0): Will not scan I2C buses.
[ 26.716] (II) CHROME(0): Detected MemClk 8
[ 26.716] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 8
[ 26.716] (II) CHROME(0): Detected TV standard: PAL.
[ 26.716] (II) Loading sub module "ramdac"
[ 26.716] (II) LoadModule: "ramdac"
[ 26.716] (II) Module "ramdac" already built-in
[ 26.716] (II) Loading sub module "i2c"
[ 26.716] (II) LoadModule: "i2c"
[ 26.716] (II) Module "i2c" already built-in
[ 26.716] (II) CHROME(0): Entered ViaI2CInit.
[ 26.716] (II) CHROME(0): Entered ViaI2CBus1Init.
[ 26.716] (II) CHROME(0): I2C bus "I2C Bus 1" initialized.
[ 26.716] (II) CHROME(0): Exiting ViaI2CBus1Init.
[ 26.716] (II) CHROME(0): Entered ViaI2CBus2Init.
[ 26.717] (II) CHROME(0): I2C bus "I2C Bus 2" initialized.
[ 26.717] (II) CHROME(0): Exiting ViaI2CBus2Init.
[ 26.717] (II) CHROME(0): Entered ViaI2CBus3Init.
[ 26.717] (II) CHROME(0): I2C bus "I2C Bus 3" initialized.
[ 26.717] (II) CHROME(0): Exiting ViaI2CBus3Init.
[ 26.717] (II) CHROME(0): Exiting ViaI2CInit.
[ 26.717] (II) Loading sub module "ddc"
[ 26.717] (II) LoadModule: "ddc"
[ 26.717] (II) Module "ddc" already built-in
[ 26.717] (II) CHROME(0): Entered viaOutputDetect.
[ 26.717] (II) CHROME(0): Entered viaProbePinStrapping.
[ 26.717] (II) CHROME(0): Probing VIA Technologies IGP pin strapping . . .
[ 26.717] (II) CHROME(0): SR12: 0x20
[ 26.717] (II) CHROME(0): SR13: 0x00
[ 26.717] (II) CHROME(0): Exiting viaProbePinStrapping.
[ 26.717] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[ 26.718] (II) CHROME(0): Output LVDS-1 has no monitor section
[ 26.718] (II) CHROME(0): Entered via_analog_init.
[ 26.718] (II) CHROME(0): Output VGA-1 has no monitor section
[ 26.718] (II) CHROME(0): Exiting via_analog_init.
[ 26.718] (II) CHROME(0): Entered via_tv_init.
[ 26.719] (--) CHROME(0): Did not detect a TV encoder.
[ 26.719] (II) CHROME(0): Exiting via_tv_init.
[ 26.719] (II) CHROME(0): Entered via_dvi_init.
[ 26.720] (--) CHROME(0): Did not find a possible external TMDS transmitter on I2C Bus 2 or I2C Bus 3.
[ 26.720] (II) CHROME(0): Exiting via_dvi_init.
[ 26.720] (II) CHROME(0): Exiting viaOutputDetect.
[ 26.720] (II) CHROME(0): Entered via_lvds_detect.
[ 26.720] (II) CHROME(0): Entered VIAGetPanelSizeFromDDCv1.
[ 26.721] (--) CHROME(0): Probing for a flat panel on I2C Bus 2.
[ 26.721] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at address 0xA0.
[ 26.777] (II) CHROME(0): EDID for output LVDS-1
[ 26.777] (II) CHROME(0): Manufacturer: BOE Model: 6a4 Serial#: 0
[ 26.777] (II) CHROME(0): Year: 2008 Week: 0
[ 26.777] (II) CHROME(0): EDID Version: 1.3
[ 26.777] (II) CHROME(0): Digital Display Input
[ 26.777] (II) CHROME(0): Max Image Size [cm]: horiz.: 19 vert.: 11
[ 26.777] (II) CHROME(0): Gamma: 2.20
[ 26.777] (II) CHROME(0): No DPMS capabilities specified
[ 26.777] (II) CHROME(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.777] (II) CHROME(0): First detailed timing is preferred mode
[ 26.777] (II) CHROME(0): redX: 0.589 redY: 0.331 greenX: 0.303 greenY: 0.540
[ 26.777] (II) CHROME(0): blueX: 0.147 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 26.777] (II) CHROME(0): Manufacturer's mask: 0
[ 26.777] (II) CHROME(0): Supported detailed timing:
[ 26.777] (II) CHROME(0): clock: 68.2 MHz Image Size: 193 x 116 mm
[ 26.777] (II) CHROME(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 26.777] (II) CHROME(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 26.777] (II) CHROME(0):
[ 26.777] (II) CHROME(0): BOE HYDIS
[ 26.777] (II) CHROME(0): HT089WX1
[ 26.777] (II) CHROME(0): EDID (in hex):
[ 26.777] (II) CHROME(0): 00ffffffffffff0009e5a40600000000
[ 26.777] (II) CHROME(0): 0012010380130b780af9c596544d8a25
[ 26.777] (II) CHROME(0): 25505400000001010101010101010101
[ 26.777] (II) CHROME(0): 010101010101a91a00a0500016303020
[ 26.777] (II) CHROME(0): 3600c17400000019000000fe000a2020
[ 26.777] (II) CHROME(0): 20202020202020202020000000fe0042
[ 26.777] (II) CHROME(0): 4f452048594449530a202020000000fe
[ 26.778] (II) CHROME(0): 004854303839575831202020200a00e2
[ 26.778] (--) CHROME(0): Detected a flat panel on I2C Bus 2.
[ 26.778] (II) CHROME(0): VIAGetPanelSizeFromEDID
[ 26.778] (II) CHROME(0): VIAGetPanelSizeFromDDCv1: (1280 X 768)
[ 26.778] (II) CHROME(0): Exiting VIAGetPanelSizeFromDDCv1.
[ 26.778] (--) CHROME(0): ViaPanelLookUpModeIndex: Width 1280, Height 768, NativeModeIndex3
[ 26.778] (--) CHROME(0): Detected Flat Panel Screen Resolution: 1280x768
[ 26.778] (II) CHROME(0): Exiting via_lvds_detect.
[ 26.778] (II) CHROME(0): Entered via_lvds_get_modes.
[ 26.778] (II) CHROME(0): EDID vendor "BOE", prod id 1700
[ 26.778] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 26.778] (II) CHROME(0): Printing probed modes for output LVDS-1
[ 26.778] (II) CHROME(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 777 790 -hsync -vsync (47.4 kHz eP)
[ 26.778] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 26.778] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at address 0xA0.
[ 26.785] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 26.785] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 26.840] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 26.840] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 26.840] (II) CHROME(0): EDID for output VGA-1
[ 26.840] (II) CHROME(0): Output LVDS-1 connected
[ 26.840] (II) CHROME(0): Output VGA-1 disconnected
[ 26.840] (II) CHROME(0): Using exact sizes for initial modes
[ 26.840] (II) CHROME(0): Output LVDS-1 using initial mode 1280x768 +0+0
[ 26.840] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
[ 26.841] (==) CHROME(0): DPI set to (96, 96)
[ 26.841] (II) Loading sub module "fb"
[ 26.841] (II) LoadModule: "fb"
[ 26.841] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.843] (II) Module fb: vendor="X.Org Foundation"
[ 26.843] compiled for 1.19.2, module version = 1.0.0
[ 26.843] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.843] (II) Loading sub module "exa"
[ 26.843] (II) LoadModule: "exa"
[ 26.844] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.859] (II) Module exa: vendor="X.Org Foundation"
[ 26.859] compiled for 1.19.2, module version = 2.6.0
[ 26.859] ABI class: X.Org Video Driver, version 23.0
[ 26.859] (II) UnloadModule: "modesetting"
[ 26.859] (II) Unloading modesetting
[ 26.859] (II) UnloadModule: "fbdev"
[ 26.859] (II) Unloading fbdev
[ 26.859] (II) UnloadSubModule: "fbdevhw"
[ 26.859] (II) Unloading fbdevhw
[ 26.859] (II) UnloadModule: "vesa"
[ 26.859] (II) Unloading vesa
[ 26.859] (--) Depth 24 pixmap format is 32 bpp
[ 26.860] (II) CHROME(0): VIAScreenInit
[ 26.860] (II) CHROME(0): Frame Buffer From (0,0) To (1280,26214)
[ 26.860] (II) CHROME(0): Using 25446 lines for offscreen memory.
[ 26.860] 3932160 bytes of Linear memory allocated at 3c0000, handle 2173570000
[ 26.860] (II) CHROME(0): Entered umsAccelInit.
[ 26.860] 262144 bytes of Linear memory allocated at 780000, handle 2173569000
[ 26.860] (II) CHROME(0): Initializing the 2D engine.
[ 26.860] (II) CHROME(0): Initializing the 3D engine.
[ 26.860] 32 bytes of Linear memory allocated at 7c1000, handle 2173569128
[ 26.860] 32 bytes of Linear memory allocated at 7c1080, handle 2173565560
[ 26.860] (II) CHROME(0): Exiting umsAccelInit.
[ 26.860] (II) CHROME(0): - Visuals set up
[ 26.861] (II) CHROME(0): - B & W
[ 26.863] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[ 26.863] (II) EXA(0): Offscreen pixmap area of 130285568 bytes
[ 26.863] (II) EXA(0): Driver registered support for the following operations:
[ 26.864] (II) Solid
[ 26.864] (II) Copy
[ 26.864] (II) Composite (RENDER acceleration)
[ 26.864] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[ 26.864] (==) CHROME(0): Backing store enabled
[ 26.864] (II) CHROME(0): - Backing store set up
[ 26.865] (II) CHROME(0): - SW cursor set up
[ 26.865] (II) CHROME(0): HWCursor ARGB enabled
[ 26.865] 16384 bytes of Linear memory allocated at 7c2400, handle 2173565072
[ 26.865] 16384 bytes of Linear memory allocated at 7c7400, handle 2173565648
[ 26.865] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.866] (II) CHROME(0): - Def Color map set up
[ 26.867] (II) CHROME(0): - Palette loaded
[ 26.867] (II) CHROME(0): - Color maps etc. set up
[ 26.867] (==) CHROME(0): DPMS enabled
[ 26.867] (II) CHROME(0): - DPMS set up
[ 26.867] (II) CHROME(0): VIAEnterVT
[ 26.867] (II) CHROME(0): Entered iga1_crtc_save.
[ 26.977] (II) CHROME(0): Entered viaIGA1Save.
[ 26.977] (II) CHROME(0): Saving sequencer registers.
[ 26.978] (II) CHROME(0): Finished saving sequencer registers.
[ 26.978] (II) CHROME(0): Saving IGA1 registers.
[ 26.978] (II) CHROME(0): Finished saving IGA1 registers.
[ 26.978] (II) CHROME(0): Exiting viaIGA1Save.
[ 26.978] (II) CHROME(0): Exiting iga1_crtc_save.
[ 26.978] (II) CHROME(0): Entered iga2_crtc_save.
[ 26.978] (II) CHROME(0): Entered viaIGA2Save.
[ 26.978] (II) CHROME(0): Saving IGA2 registers.
[ 26.978] (II) CHROME(0): Finished saving IGA2 registers.
[ 26.978] (II) CHROME(0): Exiting viaIGA2Save.
[ 26.978] (II) CHROME(0): Exiting iga2_crtc_save.
[ 26.978] (II) CHROME(0): Entered ViaLVDSPower.
[ 26.978] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 26.978] (II) CHROME(0): Exiting ViaLVDSPower.
[ 26.978] (II) CHROME(0): Entered ViaLCDPower.
[ 26.979] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 26.979] (II) CHROME(0): Exiting ViaLCDPower.
[ 26.979] (II) CHROME(0): Entered via_analog_dpms.
[ 26.979] (II) CHROME(0): Entered viaAnalogOutput.
[ 26.979] (II) CHROME(0): Analog VGA Output: Off
[ 26.979] (II) CHROME(0): Exiting viaAnalogOutput.
[ 26.979] (II) CHROME(0): Exiting via_analog_dpms.
[ 26.979] (II) CHROME(0): Entered iga1_crtc_dpms.
[ 26.979] (II) CHROME(0): Entered viaIGA1DPMSControl.
[ 26.979] (II) CHROME(0): Exiting viaIGA1DPMSControl.
[ 26.979] (II) CHROME(0): Exiting iga1_crtc_dpms.
[ 26.979] (II) CHROME(0): Entered iga2_crtc_dpms.
[ 26.979] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 26.979] (II) CHROME(0): IGA2 Display Output: Off
[ 26.979] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 26.979] (II) CHROME(0): Exiting iga2_crtc_dpms.
[ 26.979] (II) CHROME(0): Entered viaIGA2ModeValid.
[ 26.979] (II) CHROME(0): Exiting viaIGA2ModeValid.
[ 26.979] (II) CHROME(0): Entered ViaLVDSPower.
[ 26.979] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 26.979] (II) CHROME(0): Exiting ViaLVDSPower.
[ 26.979] (II) CHROME(0): Entered ViaLCDPower.
[ 26.980] (II) CHROME(0): Integrated LVDS Flat Panel Power: Off
[ 26.980] (II) CHROME(0): Exiting ViaLCDPower.
[ 26.980] (II) CHROME(0): Entered iga2_crtc_mode_set.
[ 26.980] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 26.980] (II) CHROME(0): IGA2 Display Output: Off
[ 26.980] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 26.980] (II) CHROME(0): Entered viaIGAInitCommon.
[ 26.980] (II) CHROME(0): SR15: 0x00
[ 26.980] (II) CHROME(0): SR19: 0x5F
[ 26.980] (II) CHROME(0): SR1A: 0x08
[ 26.980] (II) CHROME(0): SR1B: 0xF0
[ 26.980] (II) CHROME(0): SR1E: 0x01
[ 26.980] (II) CHROME(0): SR2A: 0x03
[ 26.980] (II) CHROME(0): SR2D: 0xFF
[ 26.980] (II) CHROME(0): SR2E: 0xFB
[ 26.980] (II) CHROME(0): SR3F: 0xFF
[ 26.980] (II) CHROME(0): SR65: 0x00
[ 26.980] (II) CHROME(0): CR36: 0x31
[ 26.980] (II) CHROME(0): CR47: 0x07
[ 26.981] (II) CHROME(0): CR6B: 0x0E
[ 26.981] (II) CHROME(0): Exiting viaIGAInitCommon.
[ 26.981] (II) CHROME(0): Entered viaIGA2Init.
[ 26.981] (II) CHROME(0): SR1B: 0xF2
[ 26.981] (II) CHROME(0): SR2D: 0x3F
[ 26.981] (II) CHROME(0): CR6A: 0x40
[ 26.981] (II) CHROME(0): CR6B: 0x06
[ 26.981] (II) CHROME(0): CR6C: 0x00
[ 26.981] (II) CHROME(0): CR79: 0xAB
[ 26.981] (II) CHROME(0): Exiting viaIGA2Init.
[ 26.981] (II) CHROME(0): Entered viaIGA2SetDisplayRegister.
[ 26.981] (II) CHROME(0): Requested Screen Mode: 1280x768
[ 26.981] (II) CHROME(0): IGA2 CrtcHTotal: 1440
[ 26.981] (II) CHROME(0): IGA2 CrtcHDisplay: 1280
[ 26.981] (II) CHROME(0): IGA2 CrtcHBlankStart: 1280
[ 26.981] (II) CHROME(0): IGA2 CrtcHBlankEnd: 1440
[ 26.981] (II) CHROME(0): IGA2 CrtcHSyncStart: 1328
[ 26.981] (II) CHROME(0): IGA2 CrtcHSyncEnd: 1360
[ 26.981] (II) CHROME(0): IGA2 CrtcVTotal: 790
[ 26.981] (II) CHROME(0): IGA2 CrtcVDisplay: 768
[ 26.981] (II) CHROME(0): IGA2 CrtcVBlankStart: 768
[ 26.981] (II) CHROME(0): IGA2 CrtcVBlankEnd: 790
[ 26.981] (II) CHROME(0): IGA2 CrtcVSyncStart: 771
[ 26.981] (II) CHROME(0): IGA2 CrtcVSyncEnd: 777
[ 26.981] (II) CHROME(0): Exiting viaIGA2SetDisplayRegister.
[ 26.981] (II) CHROME(0): ViaSetSecondaryFIFO
[ 26.981] (II) CHROME(0): ViaSetDotclock to 0x0bf0ad
[ 26.981] (II) CHROME(0): ViaSetUseExternalClock
[ 26.981] (II) CHROME(0): Entered viaIGA2DisplayChannel.
[ 26.981] (II) CHROME(0): IGA2 Display Channel: On
[ 26.981] (II) CHROME(0): Exiting viaIGA2DisplayChannel.
[ 26.981] (II) CHROME(0): Entered viaIGA2SetFBStartingAddress.
[ 26.981] (II) CHROME(0): Base Address: 0x0
[ 26.981] (II) CHROME(0): DRI Base Address: 0x78000
[ 26.981] (II) CHROME(0): CR62: 0x00
[ 26.982] (II) CHROME(0): CR63: 0x00
[ 26.982] (II) CHROME(0): CR64: 0x0F
[ 26.982] (II) CHROME(0): CRA3: 0x00
[ 26.982] (II) CHROME(0): Exiting viaIGA2SetFBStartingAddress.
[ 26.982] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 26.982] (II) CHROME(0): IGA2 Display Output: On
[ 26.982] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 26.982] (II) CHROME(0): Exiting iga2_crtc_mode_set.
[ 26.982] (II) CHROME(0): VIALoadRgbLut
[ 26.982] (II) CHROME(0): Entered ViaLVDSPower.
[ 26.982] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 26.982] (II) CHROME(0): Exiting ViaLVDSPower.
[ 26.982] (II) CHROME(0): Entered ViaLCDPower.
[ 26.983] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 26.983] (II) CHROME(0): Exiting ViaLCDPower.
[ 26.983] (II) CHROME(0): Entered via_analog_dpms.
[ 26.983] (II) CHROME(0): Entered viaAnalogOutput.
[ 26.983] (II) CHROME(0): Analog VGA Output: Off
[ 26.983] (II) CHROME(0): Exiting viaAnalogOutput.
[ 26.983] (II) CHROME(0): Exiting via_analog_dpms.
[ 26.983] (II) CHROME(0): Entered iga1_crtc_dpms.
[ 26.983] (II) CHROME(0): Entered viaIGA1DPMSControl.
[ 26.983] (II) CHROME(0): Exiting viaIGA1DPMSControl.
[ 26.983] (II) CHROME(0): Exiting iga1_crtc_dpms.
[ 26.983] DRM memory allocation failed -6
[ 26.983] 635904 bytes of Linear memory allocated at 7cc400, handle 2173651208
[ 26.984] (II) CHROME(0): Benchmarking video copy. Less time is better.
[ 26.989] (--) CHROME(0): Timed libc YUV420 copy... 1793303. Throughput: 529.3 MiB/s.
[ 26.992] (--) CHROME(0): Timed kernel YUV420 copy... 1771971. Throughput: 535.7 MiB/s.
[ 26.995] (--) CHROME(0): Timed SSE YUV420 copy... 998549. Throughput: 950.6 MiB/s.
[ 26.998] (--) CHROME(0): Timed MMX YUV420 copy... 1732521. Throughput: 547.9 MiB/s.
[ 26.999] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[ 27.001] (--) CHROME(0): Timed MMX2 YUV420 copy... 1084182. Throughput: 875.5 MiB/s.
[ 27.001] Freed 8176640 (pool 4)
[ 27.002] (--) CHROME(0): Using SSE YUV42X copy for video.
[ 27.008] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
[ 27.009] (II) CHROME(0): - Done
[ 27.009] (--) RandR disabled
[ 27.038] (II) SELinux: Disabled on system
[ 27.041] (II) AIGLX: Screen 0 is not DRI2 capable
[ 27.041] (EE) AIGLX: reverting to software rendering
[ 28.537] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.542] (II) IGLX: Loaded and initialized swrast
[ 28.543] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 28.545] (II) CHROME(0): Setting screen physical size to 338 x 203
[ 28.545] (II) CHROME(0): Entered via_xf86crtc_resize.
[ 28.545] (II) CHROME(0): Now attempting to resize the screen . . .
[ 28.545] (II) CHROME(0): It was determined that there is no need to resize the screen.
[ 28.545] (II) CHROME(0): Exiting via_xf86crtc_resize.
[ 29.136] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 29.136] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 29.136] (II) LoadModule: "libinput"
[ 29.137] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 29.207] (II) Module libinput: vendor="X.Org Foundation"
[ 29.207] compiled for 1.19.0, module version = 0.23.0
[ 29.207] Module class: X.Org XInput Driver
[ 29.207] ABI class: X.Org XInput driver, version 24.1
[ 29.207] (II) Using input driver 'libinput' for 'Power Button'
[ 29.207] (**) Power Button: always reports core events
[ 29.207] (**) Option "Device" "/dev/input/event5"
[ 29.230] (**) Option "_source" "server/udev"
[ 29.232] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 29.233] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 29.233] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5"
[ 29.234] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.234] (**) Option "xkb_model" "pc105"
[ 29.234] (**) Option "xkb_layout" "latam"
[ 29.417] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 29.417] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 29.419] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 29.419] (II) No input driver specified, ignoring this device.
[ 29.419] (II) This device may have been added with another device file.
[ 29.421] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 29.421] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 29.421] (II) Using input driver 'libinput' for 'Video Bus'
[ 29.421] (**) Video Bus: always reports core events
[ 29.421] (**) Option "Device" "/dev/input/event6"
[ 29.421] (**) Option "_source" "server/udev"
[ 29.422] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 29.423] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 29.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input13/event6"
[ 29.423] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 29.423] (**) Option "xkb_model" "pc105"
[ 29.423] (**) Option "xkb_layout" "latam"
[ 29.425] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 29.425] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 29.427] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 29.427] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 29.427] (II) Using input driver 'libinput' for 'Power Button'
[ 29.427] (**) Power Button: always reports core events
[ 29.427] (**) Option "Device" "/dev/input/event4"
[ 29.427] (**) Option "_source" "server/udev"
[ 29.428] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 29.428] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 29.429] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4"
[ 29.429] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 29.429] (**) Option "xkb_model" "pc105"
[ 29.429] (**) Option "xkb_layout" "latam"
[ 29.431] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 29.431] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 29.432] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 29.432] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 29.433] (II) Using input driver 'libinput' for 'Sleep Button'
[ 29.433] (**) Sleep Button: always reports core events
[ 29.433] (**) Option "Device" "/dev/input/event3"
[ 29.433] (**) Option "_source" "server/udev"
[ 29.434] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 29.434] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 29.434] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3"
[ 29.434] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 29.434] (**) Option "xkb_model" "pc105"
[ 29.434] (**) Option "xkb_layout" "latam"
[ 29.436] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 29.436] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 29.438] (II) config/udev: Adding input device CNF7070 (/dev/input/event12)
[ 29.439] (**) CNF7070: Applying InputClass "libinput keyboard catchall"
[ 29.439] (II) Using input driver 'libinput' for 'CNF7070'
[ 29.439] (**) CNF7070: always reports core events
[ 29.439] (**) Option "Device" "/dev/input/event12"
[ 29.439] (**) Option "_source" "server/udev"
[ 29.441] (II) input device 'CNF7070', /dev/input/event12 is tagged by udev as: Keyboard
[ 29.441] (II) input device 'CNF7070', /dev/input/event12 is a keyboard
[ 29.441] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.4/usb2/2-8/2-8:1.0/input/input20/event12"
[ 29.441] (II) XINPUT: Adding extended input device "CNF7070" (type: KEYBOARD, id 10)
[ 29.441] (**) Option "xkb_model" "pc105"
[ 29.441] (**) Option "xkb_layout" "latam"
[ 29.443] (II) input device 'CNF7070', /dev/input/event12 is tagged by udev as: Keyboard
[ 29.443] (II) input device 'CNF7070', /dev/input/event12 is a keyboard
[ 29.445] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 29.445] (II) No input driver specified, ignoring this device.
[ 29.445] (II) This device may have been added with another device file.
[ 29.446] (II) config/udev: Adding input device HDA VIA VT82xx Mic (/dev/input/event10)
[ 29.446] (II) No input driver specified, ignoring this device.
[ 29.446] (II) This device may have been added with another device file.
[ 29.447] (II) config/udev: Adding input device HDA VIA VT82xx Front Headphone (/dev/input/event11)
[ 29.447] (II) No input driver specified, ignoring this device.
[ 29.447] (II) This device may have been added with another device file.
[ 29.449] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 29.449] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 29.449] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 29.449] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.449] (**) Option "Device" "/dev/input/event0"
[ 29.449] (**) Option "_source" "server/udev"
[ 29.451] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 29.451] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 29.451] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 29.451] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 29.451] (**) Option "xkb_model" "pc105"
[ 29.451] (**) Option "xkb_layout" "latam"
[ 29.453] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 29.454] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 29.455] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 29.455] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 29.455] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 29.455] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.455] (**) Option "Device" "/dev/input/event1"
[ 29.455] (**) Option "_source" "server/udev"
[ 29.457] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[ 29.457] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[ 29.458] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event1"
[ 29.458] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 29.458] (**) Option "AccelerationScheme" "none"
[ 29.458] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 29.459] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 29.459] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 29.460] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[ 29.460] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[ 29.461] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 29.462] (II) No input driver specified, ignoring this device.
[ 29.462] (II) This device may have been added with another device file.
[ 29.463] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 29.463] (II) No input driver specified, ignoring this device.
[ 29.463] (II) This device may have been added with another device file.
[ 29.464] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 29.464] (II) No input driver specified, ignoring this device.
[ 29.464] (II) This device may have been added with another device file.
[ 29.465] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 29.465] (II) No input driver specified, ignoring this device.
[ 29.465] (II) This device may have been added with another device file.
[ 29.467] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event13)
[ 29.467] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 29.467] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 29.467] (**) HP WMI hotkeys: always reports core events
[ 29.467] (**) Option "Device" "/dev/input/event13"
[ 29.467] (**) Option "_source" "server/udev"
[ 29.469] (II) input device 'HP WMI hotkeys', /dev/input/event13 is tagged by udev as: Keyboard
[ 29.469] (II) input device 'HP WMI hotkeys', /dev/input/event13 is a keyboard
[ 29.469] (**) Option "config_info" "udev:/sys/devices/virtual/input/input19/event13"
[ 29.469] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[ 29.469] (**) Option "xkb_model" "pc105"
[ 29.469] (**) Option "xkb_layout" "latam"
[ 29.471] (II) input device 'HP WMI hotkeys', /dev/input/event13 is tagged by udev as: Keyboard
[ 29.471] (II) input device 'HP WMI hotkeys', /dev/input/event13 is a keyboard
[ 29.484] (II) CHROME(0): Entered iga2_crtc_dpms.
[ 29.484] (II) CHROME(0): Entered viaIGA2DisplayOutput.
[ 29.484] (II) CHROME(0): IGA2 Display Output: On
[ 29.484] (II) CHROME(0): Exiting viaIGA2DisplayOutput.
[ 29.484] (II) CHROME(0): Exiting iga2_crtc_dpms.
[ 29.484] (II) CHROME(0): Entered ViaLVDSPower.
[ 29.484] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 29.484] (II) CHROME(0): Exiting ViaLVDSPower.
[ 29.484] (II) CHROME(0): Entered ViaLCDPower.
[ 29.485] (II) CHROME(0): Integrated LVDS Flat Panel Power: On
[ 29.485] (II) CHROME(0): Exiting ViaLCDPower.
[ 57.096] (II) CHROME(0): Entered via_lvds_detect.
[ 57.096] (II) CHROME(0): Exiting via_lvds_detect.
[ 57.096] (II) CHROME(0): Entered via_lvds_get_modes.
[ 57.096] (II) CHROME(0): EDID vendor "BOE", prod id 1700
[ 57.096] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 57.096] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 57.104] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 57.104] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 57.163] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 57.165] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 57.168] (II) CHROME(0): Entered via_lvds_detect.
[ 57.168] (II) CHROME(0): Exiting via_lvds_detect.
[ 57.168] (II) CHROME(0): Entered via_lvds_get_modes.
[ 57.168] (II) CHROME(0): EDID vendor "BOE", prod id 1700
[ 57.168] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 57.169] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 57.176] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 57.176] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 57.253] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 57.260] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 57.262] (II) CHROME(0): Entered via_lvds_detect.
[ 57.262] (II) CHROME(0): Exiting via_lvds_detect.
[ 57.262] (II) CHROME(0): Entered via_lvds_get_modes.
[ 57.262] (II) CHROME(0): EDID vendor "BOE", prod id 1700
[ 57.262] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 57.263] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 57.274] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 57.274] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 57.369] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 57.370] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 57.371] (II) CHROME(0): Entered via_lvds_detect.
[ 57.372] (II) CHROME(0): Exiting via_lvds_detect.
[ 57.372] (II) CHROME(0): Entered via_lvds_get_modes.
[ 57.372] (II) CHROME(0): EDID vendor "BOE", prod id 1700
[ 57.372] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 57.372] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 57.379] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 57.379] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 57.433] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 57.433] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 63.440] (II) CHROME(0): Entered via_lvds_detect.
[ 63.441] (II) CHROME(0): Exiting via_lvds_detect.
[ 63.441] (II) CHROME(0): Entered via_lvds_get_modes.
[ 63.441] (II) CHROME(0): EDID vendor "BOE", prod id 1700
[ 63.441] (II) CHROME(0): Exiting via_lvds_get_modes.
[ 63.441] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1.
[ 63.485] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1.
[ 63.485] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2.
[ 63.866] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2.
[ 63.876] (--) CHROME(0): Now perform manual detection of a VGA monitor.
[ 94.802] (II) Axis 0x1 value 305 is outside expected range [1255, 4600]
See https://wayland.freedesktop.org/libinput/doc/1.6.3//absolute_coordinate_ranges.html for details
[ 99.605] (II) CHROME(0): VIALoadRgbLut
[ 164.071] (II) CHROME(0): VIALoadRgbLut
[ 201.862] (II) CHROME(0): VIALoadRgbLut
[ 359.844] (II) CHROME(0): VIALoadRgbLut
[ 376.977] (II) CHROME(0): VIALoadRgbLut
[ 527.596] (II) CHROME(0): VIALoadRgbLut
[ 608.597] (II) CHROME(0): VIALoadRgbLut
[ 627.916] (II) CHROME(0): VIALoadRgbLut
[ 650.775] (II) CHROME(0): VIALoadRgbLut
[ 744.928] (II) CHROME(0): VIALoadRgbLut
[ 808.255] (II) CHROME(0): VIALoadRgbLut
[ 1145.700] (II) CHROME(0): VIALoadRgbLut
[ 1152.551] (EE) kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.6.3/touchpad_jumping_cursor.html for details
[ 1208.986] (II) CHROME(0): VIALoadRgbLut
[ 1388.304] (II) CHROME(0): VIALoadRgbLut
[ 1399.431] (II) CHROME(0): VIALoadRgbLut
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12202755
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14593842
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0D:00/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0D:00/input/input9
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=12190936
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0D:00/input/input9/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0D:00/input/input9/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14611692
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input13
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input13
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b 0 0 0 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12223413
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input13/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/LNXVIDEO:00/input/input13/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14600272
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12204896
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:PNP0C0C/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14579227
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12196826
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14607557
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:10.4/usb2/2-8/2-8:1.0/input/input20
E: DEVPATH=/devices/pci0000:00/0000:00:10.4/usb2/2-8/2-8:1.0/input/input20
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_10_4-usb-0_8_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=CNF7070
E: ID_MODEL_ENC=CNF7070
E: ID_MODEL_ID=b107
E: ID_PATH=pci-0000:00:10.4-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_10_4-usb-0_8_1_0
E: ID_REVISION=0855
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._CNF7070_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0 0 0 0
E: MODALIAS=input:b0003v04F2pB107e0855-e0,1,kD4,ramlsfw
E: NAME="CNF7070"
E: PHYS="usb-0000:00:10.4-8/button"
E: PRODUCT=3/4f2/b107/855
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14791244
P: /devices/pci0000:00/0000:00:10.4/usb2/2-8/2-8:1.0/input/input20/event12
N: input/event12
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7070_SN0001-event-if00
S: input/by-path/pci-0000:00:10.4-usb-0:8:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:10.4-usb-0:8:1.0-event /dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7070_SN0001-event-if00
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:10.4/usb2/2-8/2-8:1.0/input/input20/event12
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=CNF7070
E: ID_MODEL_ENC=CNF7070
E: ID_MODEL_ID=b107
E: ID_PATH=pci-0000:00:10.4-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_10_4-usb-0_8_1_0
E: ID_REVISION=0855
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._CNF7070_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: LIBINPUT_DEVICE_GROUP=3/4f2/b107/855:usb-0000:00:10.4-8/button
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14920858
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/pci0000:80/0000:80:01.0/sound/card0/input16
E: DEVPATH=/devices/pci0000:80/0000:80:01.0/sound/card0/input16
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_80_01_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:80:01.0
E: ID_PATH_TAG=pci-0000_80_01_0
E: MODALIAS=input:b0001v11D4p194Ae0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/11d4/194a/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14698600
P: /devices/pci0000:80/0000:80:01.0/sound/card0/input16/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:80/0000:80:01.0/sound/card0/input16/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:80:01.0
E: ID_PATH_TAG=pci-0000_80_01_0
E: LIBINPUT_DEVICE_GROUP=1/11d4/194a/1:card0/codec#0/beep0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14857116
P: /devices/pci0000:80/0000:80:01.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:80/0000:80:01.0/sound/card0/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_80_01_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:80:01.0
E: ID_PATH_TAG=pci-0000_80_01_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA VIA VT82xx Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=14748758
P: /devices/pci0000:80/0000:80:01.0/sound/card0/input17/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:80/0000:80:01.0/sound/card0/input17/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:80:01.0
E: ID_PATH_TAG=pci-0000_80_01_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14873377
P: /devices/pci0000:80/0000:80:01.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:80/0000:80:01.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_80_01_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:80:01.0
E: ID_PATH_TAG=pci-0000_80_01_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA VIA VT82xx Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=14768390
P: /devices/pci0000:80/0000:80:01.0/sound/card0/input18/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:80/0000:80:01.0/sound/card0/input18/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:80:01.0
E: ID_PATH_TAG=pci-0000_80_01_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14895343
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=20000 0 20 0 0 0 0 1500f 2100000 3803078 f900d401 feffffdf ffefffff ffffffff fffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D4,D9,E0,E1,E2,E3,EC,EE,F0,185,1D1,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2238395
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: KEYBOARD_KEY_81=fn_esc
E: KEYBOARD_KEY_89=battery
E: KEYBOARD_KEY_8a=screenlock
E: KEYBOARD_KEY_8b=camera
E: KEYBOARD_KEY_8c=media
E: KEYBOARD_KEY_8e=dvd
E: KEYBOARD_KEY_92=brightnessdown
E: KEYBOARD_KEY_97=brightnessup
E: KEYBOARD_KEY_b1=help
E: KEYBOARD_KEY_b3=unknown
E: KEYBOARD_KEY_d7=wlan
E: KEYBOARD_KEY_ee=switchvideomode
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab41:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14584420
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio4/input/input8
E: ABS=11000003
E: DEVPATH=/devices/platform/i8042/serio4/input/input8
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-4
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: KEY=420 0 30000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,ra0,1,18,1C,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio4/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=1
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2988552
P: /devices/platform/i8042/serio4/input/input8/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/i8042/serio4/input/input8/event1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=14
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=41
E: LIBINPUT_DEVICE_GROUP=11/2/7/1b1:isa0060/serio4
E: LIBINPUT_MODEL_SYNAPTICS_SERIAL_TOUCHPAD=1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14677408
P: /devices/platform/i8042/serio4/input/input8/mouse0
N: input/mouse0
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio4/input/input8/mouse0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2990463
P: /devices/platform/lis3lv02d/input/input14
E: ABS=7
E: DEVPATH=/devices/platform/lis3lv02d/input/input14
E: EV=9
E: ID_FOR_SEAT=input-platform-lis3lv02d
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MODALIAS=input:b0019v0000p0000e0000-e0,3,kra0,1,2,mlsfw
E: NAME="ST LIS3LV02DL Accelerometer"
E: PHYS="lis3lv02d/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12318112
P: /devices/platform/lis3lv02d/input/input14/event7
N: input/event7
S: input/by-path/platform-lis3lv02d-event
E: DEVLINKS=/dev/input/by-path/platform-lis3lv02d-event
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/lis3lv02d/input/input14/event7
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: LIBINPUT_DEVICE_GROUP=19/0/0/0:lis3lv02d
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14621233
P: /devices/platform/lis3lv02d/input/input14/js0
N: input/js0
E: DEVNAME=/dev/input/js0
E: DEVPATH=/devices/platform/lis3lv02d/input/input14/js0
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MAJOR=13
E: MINOR=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=12355744
P: /devices/platform/pcspkr/input/input15
E: DEVPATH=/devices/platform/pcspkr/input/input15
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12343127
P: /devices/platform/pcspkr/input/input15/event8
N: input/event8
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/pcspkr/input/input15/event8
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14736458
P: /devices/virtual/input/input19
E: DEVPATH=/devices/virtual/input/input19
E: EV=33
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=40 0 0 0 10007 0 0 2102400 0 0 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,8D,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5,
E: MSC=10
E: NAME="HP WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=22
E: TAGS=:seat:
E: USEC_INITIALIZED=14822038
P: /devices/virtual/input/input19/event13
N: input/event13
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/virtual/input/input19/event13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: LIBINPUT_DEVICE_GROUP=19/0/0/0:wmi
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14913104
E: XKBLAYOUT=latam
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 9.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386
(i686)
Kernel: Linux 4.9.0-3-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-openchrome depends on:
ii libc6 2.24-10
ii libdrm2 2.4.74-1
ii libx11-6 2:1.6.4-3
ii libxext6 2:1.3.3-1+b2
ii libxv1 2:1.0.11-1
ii libxvmc1 2:1.0.10-1
ii xserver-xorg-core [xorg-video-abi-23] 2:1.19.2-1
xserver-xorg-video-openchrome recommends no packages.
xserver-xorg-video-openchrome suggests no packages.
-- no debconf information
--- End Message ---