Bug#873436: xserver-xorg-video-intel: IGP crash during screensaver
Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20161206-1
Severity: important
Dear Maintainer,
I'm using debian jessie with uptodate packages.
It is the second time that IGP is crashing during the wallpaper.
Wallpaper was active long time before crash.
I hope that the attached dump will be useful.
* What led up to the situation?
maybe the wallpaper, but I don't really believe it
* What exactly did you do (or not do) that was effective (or
ineffective)?
nothing
* What outcome did you expect instead?
I'm expecting no crash
I'm using intel core i5-7600 with 4k@60Hz desktop.
syslog extract :
Aug 26 21:02:40 lemon kernel: [23694.914814] [drm] GPU HANG: ecode 9:0:0xfffffffe, in Xorg [738], reason: Hang on render ring, action: reset
Aug 26 21:02:40 lemon kernel: [23694.914817] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
Aug 26 21:02:40 lemon kernel: [23694.914818] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
Aug 26 21:02:40 lemon kernel: [23694.914819] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
Aug 26 21:02:40 lemon kernel: [23694.914820] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
Aug 26 21:02:40 lemon kernel: [23694.914821] [drm] GPU crash dump saved to /sys/class/drm/card0/error
Aug 26 21:02:40 lemon kernel: [23694.914873] drm/i915: Resetting chip after gpu hang
Aug 26 21:02:40 lemon kernel: [23694.914933] [drm] RC6 on
Aug 26 21:02:40 lemon kernel: [23694.930508] [drm] GuC firmware load skipped
Aug 26 21:02:52 lemon kernel: [23706.914579] drm/i915: Resetting chip after gpu hang
Aug 26 21:02:52 lemon kernel: [23706.914640] [drm] RC6 on
Aug 26 21:02:52 lemon kernel: [23706.929619] [drm] GuC firmware load skipped
xorg conf:
Section "Device"
Identifier "Intel_HD_Graphics_630"
Driver "intel"
BusID "PCI:0:2:0"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "VSync" "true"
EndSection
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:5912] (rev 04)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 252 May 23 22:31 40-intel-hd630.conf
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 126070 Jul 19 16:50 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 18494 Aug 27 18:11 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 26.787]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 26.787] X Protocol Version 11, Revision 0
[ 26.787] Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
[ 26.787] Current Operating System: Linux lemon 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06) x86_64
[ 26.787] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=b919e139-2813-40fc-b7df-644f207388dc ro quiet
[ 26.787] Build Date: 07 July 2017 06:14:06AM
[ 26.787] xorg-server 2:1.19.2-1+deb9u1 (https://www.debian.org/support)
[ 26.787] Current version of pixman: 0.34.0
[ 26.787] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.787] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.787] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 27 18:09:20 2017
[ 27.025] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.025] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.217] (==) No Layout section. Using the first Screen section.
[ 27.217] (==) No screen section available. Using defaults.
[ 27.217] (**) |-->Screen "Default Screen Section" (0)
[ 27.217] (**) | |-->Monitor "<default monitor>"
[ 27.219] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 27.219] (**) | |-->Device "Intel_HD_Graphics_630"
[ 27.219] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.219] (==) Automatically adding devices
[ 27.219] (==) Automatically enabling devices
[ 27.219] (==) Automatically adding GPU devices
[ 27.219] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 27.284] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.284] Entry deleted from font path.
[ 27.303] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 27.303] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.303] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.303] (II) Loader magic: 0x556c40756e00
[ 27.303] (II) Module ABI versions:
[ 27.303] X.Org ANSI C Emulation: 0.4
[ 27.303] X.Org Video Driver: 23.0
[ 27.303] X.Org XInput driver : 24.1
[ 27.303] X.Org Server Extension : 10.0
[ 27.304] (++) using VT number 7
[ 27.304] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 27.306] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.317] (--) PCI:*(0:0:2:0) 8086:5912:1458:d000 rev 4, Mem @ 0xec000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 27.317] (II) LoadModule: "glx"
[ 27.318] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.800] (II) Module glx: vendor="X.Org Foundation"
[ 27.800] compiled for 1.19.2, module version = 1.0.0
[ 27.800] ABI class: X.Org Server Extension, version 10.0
[ 27.800] (II) LoadModule: "intel"
[ 27.800] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 27.970] (II) Module intel: vendor="X.Org Foundation"
[ 27.970] compiled for 1.19.0, module version = 2.99.917
[ 27.970] Module class: X.Org Video Driver
[ 27.970] ABI class: X.Org Video Driver, version 23.0
[ 27.970] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 27.971] (II) intel: Driver for Intel(R) HD Graphics
[ 27.971] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 27.971] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 28.070] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 28.070] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 28.070] (II) intel(0): SNA compiled for use with valgrind
[ 28.114] (--) intel(0): gen9 engineering sample
[ 28.114] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 28.114] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.114] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 28.114] (==) intel(0): RGB weight 888
[ 28.114] (==) intel(0): Default visual is TrueColor
[ 28.114] (**) intel(0): Option "AccelMethod" "sna"
[ 28.114] (**) intel(0): Option "VSync" "true"
[ 28.114] (**) intel(0): Option "TearFree" "true"
[ 28.115] (II) intel(0): Output DP1 has no monitor section
[ 28.116] (II) intel(0): Enabled output DP1
[ 28.116] (II) intel(0): Output HDMI1 has no monitor section
[ 28.116] (II) intel(0): Enabled output HDMI1
[ 28.116] (II) intel(0): Output HDMI2 has no monitor section
[ 28.116] (II) intel(0): Enabled output HDMI2
[ 28.116] (II) intel(0): Output DP2 has no monitor section
[ 28.116] (II) intel(0): Enabled output DP2
[ 28.116] (II) intel(0): Output HDMI3 has no monitor section
[ 28.116] (II) intel(0): Enabled output HDMI3
[ 28.116] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 28.117] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 28.117] (II) intel(0): Enabled output VIRTUAL1
[ 28.117] (--) intel(0): Output DP2 using initial mode 3840x2160 on pipe 0
[ 28.117] (**) intel(0): TearFree enabled
[ 28.117] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 28.117] (==) intel(0): DPI set to (96, 96)
[ 28.117] (II) Loading sub module "dri3"
[ 28.117] (II) LoadModule: "dri3"
[ 28.117] (II) Module "dri3" already built-in
[ 28.117] (II) Loading sub module "dri2"
[ 28.117] (II) LoadModule: "dri2"
[ 28.117] (II) Module "dri2" already built-in
[ 28.117] (II) Loading sub module "present"
[ 28.117] (II) LoadModule: "present"
[ 28.117] (II) Module "present" already built-in
[ 28.117] (==) Depth 24 pixmap format is 32 bpp
[ 28.230] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[ 28.230] (==) intel(0): Backing store enabled
[ 28.230] (==) intel(0): Silken mouse enabled
[ 28.238] (II) intel(0): HW Cursor enabled
[ 28.238] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.240] (==) intel(0): DPMS enabled
[ 28.240] (==) intel(0): Display hotplug detection enabled
[ 28.240] (II) intel(0): [DRI2] Setup complete
[ 28.240] (II) intel(0): [DRI2] DRI driver: i965
[ 28.240] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 28.240] (II) intel(0): direct rendering: DRI2 enabled
[ 28.240] (II) intel(0): hardware support for Present enabled
[ 28.240] (--) RandR disabled
[ 28.333] (II) SELinux: Disabled on system
[ 28.794] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.794] (II) AIGLX: enabled GLX_ARB_create_context
[ 28.794] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 28.794] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 28.794] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.794] (II) AIGLX: enabled GLX_SGI_swap_control
[ 28.794] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 28.794] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 28.794] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 28.794] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.794] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 28.794] (II) AIGLX: Loaded and initialized i965
[ 28.794] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.813] (II) intel(0): switch to mode 3840x2160@60.0 on DP2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 28.815] (II) intel(0): Setting screen physical size to 1016 x 571
[ 29.407] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 29.407] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 29.407] (II) LoadModule: "libinput"
[ 29.407] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 29.439] (II) Module libinput: vendor="X.Org Foundation"
[ 29.439] compiled for 1.19.0, module version = 0.23.0
[ 29.439] Module class: X.Org XInput Driver
[ 29.439] ABI class: X.Org XInput driver, version 24.1
[ 29.439] (II) Using input driver 'libinput' for 'Power Button'
[ 29.439] (**) Power Button: always reports core events
[ 29.439] (**) Option "Device" "/dev/input/event4"
[ 29.439] (**) Option "_source" "server/udev"
[ 29.440] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 29.440] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 29.456] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 29.456] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.456] (**) Option "xkb_model" "pc105"
[ 29.456] (**) Option "xkb_layout" "fr"
[ 29.456] (**) Option "xkb_variant" "latin9"
[ 29.498] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 29.498] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 29.498] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 29.498] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 29.498] (II) Using input driver 'libinput' for 'Video Bus'
[ 29.498] (**) Video Bus: always reports core events
[ 29.498] (**) Option "Device" "/dev/input/event6"
[ 29.498] (**) Option "_source" "server/udev"
[ 29.499] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 29.499] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 29.512] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[ 29.512] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 29.512] (**) Option "xkb_model" "pc105"
[ 29.512] (**) Option "xkb_layout" "fr"
[ 29.512] (**) Option "xkb_variant" "latin9"
[ 29.512] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 29.512] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 29.513] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 29.513] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 29.513] (II) Using input driver 'libinput' for 'Power Button'
[ 29.513] (**) Power Button: always reports core events
[ 29.513] (**) Option "Device" "/dev/input/event3"
[ 29.513] (**) Option "_source" "server/udev"
[ 29.513] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 29.513] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 29.528] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 29.528] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 29.528] (**) Option "xkb_model" "pc105"
[ 29.528] (**) Option "xkb_layout" "fr"
[ 29.528] (**) Option "xkb_variant" "latin9"
[ 29.529] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 29.529] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 29.529] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 29.530] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 29.530] (II) Using input driver 'libinput' for 'Sleep Button'
[ 29.530] (**) Sleep Button: always reports core events
[ 29.530] (**) Option "Device" "/dev/input/event2"
[ 29.530] (**) Option "_source" "server/udev"
[ 29.530] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 29.530] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 29.544] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 29.544] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 29.544] (**) Option "xkb_model" "pc105"
[ 29.544] (**) Option "xkb_layout" "fr"
[ 29.544] (**) Option "xkb_variant" "latin9"
[ 29.545] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 29.545] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 29.546] (II) config/udev: Adding input device CHERRY USB Mouse (/dev/input/event1)
[ 29.546] (**) CHERRY USB Mouse: Applying InputClass "libinput pointer catchall"
[ 29.546] (II) Using input driver 'libinput' for 'CHERRY USB Mouse'
[ 29.546] (**) CHERRY USB Mouse: always reports core events
[ 29.546] (**) Option "Device" "/dev/input/event1"
[ 29.546] (**) Option "_source" "server/udev"
[ 29.604] (II) input device 'CHERRY USB Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 29.604] (II) input device 'CHERRY USB Mouse', /dev/input/event1 is a pointer caps
[ 29.644] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046A:00B6.0001/input/input1/event1"
[ 29.644] (II) XINPUT: Adding extended input device "CHERRY USB Mouse" (type: MOUSE, id 10)
[ 29.644] (**) Option "AccelerationScheme" "none"
[ 29.644] (**) CHERRY USB Mouse: (accel) selected scheme none/0
[ 29.644] (**) CHERRY USB Mouse: (accel) acceleration factor: 2.000
[ 29.644] (**) CHERRY USB Mouse: (accel) acceleration threshold: 4
[ 29.704] (II) input device 'CHERRY USB Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 29.704] (II) input device 'CHERRY USB Mouse', /dev/input/event1 is a pointer caps
[ 29.705] (II) config/udev: Adding input device CHERRY USB Mouse (/dev/input/mouse0)
[ 29.705] (II) No input driver specified, ignoring this device.
[ 29.705] (II) This device may have been added with another device file.
[ 29.706] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
[ 29.706] (II) No input driver specified, ignoring this device.
[ 29.706] (II) This device may have been added with another device file.
[ 29.706] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event11)
[ 29.706] (II) No input driver specified, ignoring this device.
[ 29.706] (II) This device may have been added with another device file.
[ 29.707] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event12)
[ 29.707] (II) No input driver specified, ignoring this device.
[ 29.707] (II) This device may have been added with another device file.
[ 29.707] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 29.707] (II) No input driver specified, ignoring this device.
[ 29.707] (II) This device may have been added with another device file.
[ 29.708] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 29.708] (II) No input driver specified, ignoring this device.
[ 29.708] (II) This device may have been added with another device file.
[ 29.708] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 29.708] (II) No input driver specified, ignoring this device.
[ 29.708] (II) This device may have been added with another device file.
[ 29.709] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[ 29.709] (II) No input driver specified, ignoring this device.
[ 29.709] (II) This device may have been added with another device file.
[ 29.709] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 29.709] (II) No input driver specified, ignoring this device.
[ 29.709] (II) This device may have been added with another device file.
[ 29.710] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 29.710] (II) No input driver specified, ignoring this device.
[ 29.710] (II) This device may have been added with another device file.
[ 29.710] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 29.710] (II) No input driver specified, ignoring this device.
[ 29.710] (II) This device may have been added with another device file.
[ 29.711] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 29.711] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 29.711] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 29.711] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.711] (**) Option "Device" "/dev/input/event0"
[ 29.711] (**) Option "_source" "server/udev"
[ 29.712] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 29.712] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 29.752] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 29.752] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 29.752] (**) Option "xkb_model" "pc105"
[ 29.752] (**) Option "xkb_layout" "fr"
[ 29.752] (**) Option "xkb_variant" "latin9"
[ 29.752] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 29.752] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 29.752] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 29.752] (II) No input driver specified, ignoring this device.
[ 29.752] (II) This device may have been added with another device file.
[ 30.119] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 153.390] (--) intel(0): HDMI max TMDS frequency 600000KHz
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12032863
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=13121511
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12369995
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=13121602
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12032463
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:PNP0C0C/button
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=13121555
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12032057
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=13119827
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046A:00B6.0001/input/input1
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046A:00B6.0001/input/input1
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_12_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Mouse
E: ID_MODEL_ENC=USB\x20Mouse
E: ID_MODEL_ID=00b6
E: ID_PATH=pci-0000:00:14.0-usb-0:12:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_12_1_0
E: ID_REVISION=0103
E: ID_SERIAL=CHERRY_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CHERRY
E: ID_VENDOR_ENC=CHERRY
E: ID_VENDOR_ID=046a
E: KEY=1f0000 0 0 0 0
E: MODALIAS=input:b0003v046Ap00B6e0111-e0,1,2,4,k110,111,112,113,114,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="CHERRY USB Mouse"
E: PHYS="usb-0000:00:14.0-12/input0"
E: PRODUCT=3/46a/b6/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6262219
P: /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046A:00B6.0001/input/input1/event1
N: input/event1
S: input/by-id/usb-CHERRY_USB_Mouse-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:12:1.0-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:12:1.0-event-mouse /dev/input/by-id/usb-CHERRY_USB_Mouse-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046A:00B6.0001/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Mouse
E: ID_MODEL_ENC=USB\x20Mouse
E: ID_MODEL_ID=00b6
E: ID_PATH=pci-0000:00:14.0-usb-0:12:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_12_1_0
E: ID_REVISION=0103
E: ID_SERIAL=CHERRY_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CHERRY
E: ID_VENDOR_ENC=CHERRY
E: ID_VENDOR_ID=046a
E: LIBINPUT_DEVICE_GROUP=3/46a/b6/111:usb-0000:00:14.0-12
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13120725
P: /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046A:00B6.0001/input/input1/mouse0
N: input/mouse0
S: input/by-id/usb-CHERRY_USB_Mouse-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:12:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:12:1.0-mouse /dev/input/by-id/usb-CHERRY_USB_Mouse-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046A:00B6.0001/input/input1/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Mouse
E: ID_MODEL_ENC=USB\x20Mouse
E: ID_MODEL_ID=00b6
E: ID_PATH=pci-0000:00:14.0-usb-0:12:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_12_1_0
E: ID_REVISION=0103
E: ID_SERIAL=CHERRY_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CHERRY
E: ID_VENDOR_ENC=CHERRY
E: ID_VENDOR_ID=046a
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6263050
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel PCH Line Out Front"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=12996356
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13957678
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel PCH Line Out Surround"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=13911868
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13961586
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel PCH Line Out CLFE"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=13911920
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input12/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input12/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13961728
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=13912304
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input13/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input13/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13961582
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=13911975
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input14/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input14/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13957694
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=13913748
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input15/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input15/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13949591
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=13913745
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input16/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input16/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13969447
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Front Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=12841191
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input7/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13121444
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Rear Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=12840110
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input8/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13122219
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD,
E: NAME="HDA Intel PCH Line"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=2000
E: TAGS=:seat:
E: USEC_INITIALIZED=12841465
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13120837
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5746356
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab41:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13120936
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/platform/pcspkr/input/input5
E: DEVPATH=/devices/platform/pcspkr/input/input5
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12046933
P: /devices/platform/pcspkr/input/input5/event5
N: input/event5
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/pcspkr/input/input5/event5
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13119890
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 9.1
APT prefers stable
APT policy: (700, 'stable'), (80, 'testing'), (58, 'unstable'), (55, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.24-11+deb9u1
ii libdrm-intel1 2.4.74-1
ii libdrm2 2.4.74-1
ii libpciaccess0 0.13.4-1+b2
ii libpixman-1-0 0.34.0-1
ii libudev1 232-25+deb9u1
ii libx11-6 2:1.6.4-3
ii libx11-xcb1 2:1.6.4-3
ii libxcb-dri2-0 1.12-1
ii libxcb-dri3-0 1.12-1
ii libxcb-sync1 1.12-1
ii libxcb-util0 0.3.8-3+b2
ii libxcb1 1.12-1
ii libxcursor1 1:1.1.14-1+b4
ii libxdamage1 1:1.1.4-2+b3
ii libxext6 2:1.3.3-1+b2
ii libxfixes3 1:5.0.3-1
ii libxinerama1 2:1.1.3-1+b3
ii libxrandr2 2:1.5.1-1
ii libxrender1 1:0.9.10-1
ii libxshmfence1 1.2-1+b2
ii libxss1 1:1.2.2-1
ii libxtst6 2:1.2.3-1
ii libxv1 2:1.0.11-1
ii libxvmc1 2:1.0.10-1
ii xserver-xorg-core [xorg-video-abi-23] 2:1.19.2-1+deb9u1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: