One-finger drag-n-drop (double tap, hold, drug) does not work on Dell 500 laptop (with some single-touch Alps touchpad). I have to use second finger to keep left touchpad button "pressed" for dragging. Option "tap is click" is activated in settings panel and _does_ work. Double tap also does like double-click as expected.
The same (but i386) Debian 9 installation on another my laptop Thinkpad T60 performs taps, double taps, and drag-n-drops as expected.
I also have to say the package was not installed automatically by debian-installer on both laptops so initially I had no "Touchpad" tab in mouse settings panel of Mate DE. I do not know is it by design or should be also reported to somewhere...
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.9.0-3-amd64 (
debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 31155 Aug 4 17:05 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 212.220]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 212.220] X Protocol Version 11, Revision 0
[ 212.220] Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
[ 212.220] Current Operating System: Linux bagira 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26) x86_64
[ 212.220] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=fb523eda-ef66-4fa2-aebc-11c98ee0e9c6 ro quiet
[ 212.220] Build Date: 07 July 2017 06:14:06AM
[ 212.220] xorg-server 2:1.19.2-1+deb9u1 (
https://www.debian.org/support)
[ 212.220] Current version of pixman: 0.34.0
[ 212.220] Before reporting problems, check
http://wiki.x.org to make sure that you have the latest version.
[ 212.220] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 212.220] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 4 00:32:16 2017
[ 212.281] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 212.494] (==) No Layout section. Using the first Screen section.
[ 212.494] (==) No screen section available. Using defaults.
[ 212.495] (**) |-->Screen "Default Screen Section" (0)
[ 212.495] (**) | |-->Monitor "<default monitor>"
[ 212.556] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 212.556] (==) Automatically adding devices
[ 212.556] (==) Automatically enabling devices
[ 212.556] (==) Automatically adding GPU devices
[ 212.556] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 212.617] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 212.617] Entry deleted from font path.
[ 212.627] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 212.627] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 212.627] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 212.627] (II) Loader magic: 0x55e8e87d1e00
[ 212.627] (II) Module ABI versions:
[ 212.627] X.Org ANSI C Emulation: 0.4
[ 212.627] X.Org Video Driver: 23.0
[ 212.627] X.Org XInput driver : 24.1
[ 212.627] X.Org Server Extension : 10.0
[ 212.629] (++) using VT number 7
[ 212.629] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 212.629] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 212.635] (--) PCI:*(0:0:2:0) 8086:2a02:1028:023a rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8, BIOS @ 0x????????/131072
[ 212.635] (--) PCI: (0:0:2:1) 8086:2a03:1028:023a rev 12, Mem @ 0xfeb00000/1048576
[ 212.635] (II) LoadModule: "glx"
[ 212.732] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 213.157] (II) Module glx: vendor="X.Org Foundation"
[ 213.158] compiled for 1.19.2, module version = 1.0.0
[ 213.158] ABI class: X.Org Server Extension, version 10.0
[ 213.158] (==) Matched modesetting as autoconfigured driver 0
[ 213.158] (==) Matched fbdev as autoconfigured driver 1
[ 213.158] (==) Matched vesa as autoconfigured driver 2
[ 213.158] (==) Assigned the driver to the xf86ConfigLayout
[ 213.158] (II) LoadModule: "modesetting"
[ 213.158] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 213.189] (II) Module modesetting: vendor="X.Org Foundation"
[ 213.189] compiled for 1.19.2, module version = 1.19.2
[ 213.189] Module class: X.Org Video Driver
[ 213.189] ABI class: X.Org Video Driver, version 23.0
[ 213.189] (II) LoadModule: "fbdev"
[ 213.189] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 213.240] (II) Module fbdev: vendor="X.Org Foundation"
[ 213.241] compiled for 1.19.0, module version = 0.4.4
[ 213.241] Module class: X.Org Video Driver
[ 213.241] ABI class: X.Org Video Driver, version 23.0
[ 213.241] (II) LoadModule: "vesa"
[ 213.241] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 213.241] (II) Module vesa: vendor="X.Org Foundation"
[ 213.241] compiled for 1.19.0, module version = 2.3.4
[ 213.241] Module class: X.Org Video Driver
[ 213.241] ABI class: X.Org Video Driver, version 23.0
[ 213.241] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 213.242] (II) FBDEV: driver for framebuffer: fbdev
[ 213.242] (II) VESA: driver for VESA chipsets: vesa
[ 213.269] (II) modeset(0): using drv /dev/dri/card0
[ 213.269] (WW) Falling back to old probe method for fbdev
[ 213.269] (II) Loading sub module "fbdevhw"
[ 213.269] (II) LoadModule: "fbdevhw"
[ 213.269] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 213.294] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 213.294] compiled for 1.19.2, module version = 0.0.2
[ 213.294] ABI class: X.Org Video Driver, version 23.0
[ 213.294] (WW) Falling back to old probe method for vesa
[ 213.294] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 213.294] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 213.294] (==) modeset(0): RGB weight 888
[ 213.294] (==) modeset(0): Default visual is TrueColor
[ 213.294] (II) Loading sub module "glamoregl"
[ 213.294] (II) LoadModule: "glamoregl"
[ 213.294] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 213.850] (II) Module glamoregl: vendor="X.Org Foundation"
[ 213.850] compiled for 1.19.2, module version = 1.0.0
[ 213.850] ABI class: X.Org ANSI C Emulation, version 0.4
[ 213.851] (II) glamor: OpenGL accelerated X.org driver based.
[ 214.525] (II) glamor: EGL version 1.4 (DRI2):
[ 214.857] (II) modeset(0): glamor initialized
[ 214.858] (II) modeset(0): Output LVDS-1 has no monitor section
[ 214.870] (II) modeset(0): Output VGA-1 has no monitor section
[ 214.870] (II) modeset(0): EDID for output LVDS-1
[ 214.870] (II) modeset(0): Manufacturer: AUO Model: 2274 Serial#: 0
[ 214.870] (II) modeset(0): Year: 2008 Week: 1
[ 214.871] (II) modeset(0): EDID Version: 1.3
[ 214.871] (II) modeset(0): Digital Display Input
[ 214.871] (II) modeset(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 214.871] (II) modeset(0): Gamma: 2.20
[ 214.871] (II) modeset(0): No DPMS capabilities specified
[ 214.871] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 214.871] (II) modeset(0): First detailed timing is preferred mode
[ 214.871] (II) modeset(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
[ 214.871] (II) modeset(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 214.871] (II) modeset(0): Manufacturer's mask: 0
[ 214.871] (II) modeset(0): Supported detailed timing:
[ 214.871] (II) modeset(0): clock: 71.3 MHz Image Size: 331 x 207 mm
[ 214.871] (II) modeset(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1457 h_border: 0
[ 214.871] (II) modeset(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 214.871] (II) modeset(0): Supported detailed timing:
[ 214.871] (II) modeset(0): clock: 71.3 MHz Image Size: 331 x 207 mm
[ 214.871] (II) modeset(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1457 h_border: 0
[ 214.871] (II) modeset(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 214.871] (II) modeset(0): W651G
[ 214.871] (II) modeset(0): 1AMUt\x95\xc8\xff
[ 214.871] (II) modeset(0): EDID (in hex):
[ 214.871] (II) modeset(0): 00ffffffffffff0006af742200000000
[ 214.871] (II) modeset(0): 01120103802115780a1cf59758508e27
[ 214.871] (II) modeset(0): 27505400000001010101010101010101
[ 214.871] (II) modeset(0): 010101010101d61b00b1502010301030
[ 214.871] (II) modeset(0): 13004bcf10000019d61b00b150201030
[ 214.871] (II) modeset(0): 103013004bcf10000000000000fe0057
[ 214.871] (II) modeset(0): 363531470042313534455732000000fe
[ 214.871] (II) modeset(0): 0031414d557495c8ff01010a202000c5
[ 214.871] (II) modeset(0): Printing probed modes for output LVDS-1
[ 214.871] (II) modeset(0): Modeline "1280x800"x59.9 71.26 1280 1296 1344 1457 800 801 804 816 -hsync -vsync (48.9 kHz eP)
[ 214.871] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 214.871] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 214.871] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 214.871] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 214.871] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 214.871] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 214.871] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 214.871] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 214.871] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 214.871] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 214.871] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 214.871] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 214.871] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 214.871] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 214.871] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 214.871] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 214.871] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 214.871] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 214.871] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 214.871] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 214.871] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 214.872] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 214.872] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 214.872] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 214.872] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 214.884] (II) modeset(0): EDID for output VGA-1
[ 214.884] (II) modeset(0): Output LVDS-1 connected
[ 214.884] (II) modeset(0): Output VGA-1 disconnected
[ 214.884] (II) modeset(0): Using exact sizes for initial modes
[ 214.884] (II) modeset(0): Output LVDS-1 using initial mode 1280x800 +0+0
[ 214.884] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 214.884] (==) modeset(0): DPI set to (96, 96)
[ 214.884] (II) Loading sub module "fb"
[ 214.884] (II) LoadModule: "fb"
[ 214.885] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 214.942] (II) Module fb: vendor="X.Org Foundation"
[ 214.942] compiled for 1.19.2, module version = 1.0.0
[ 214.942] ABI class: X.Org ANSI C Emulation, version 0.4
[ 214.942] (II) UnloadModule: "fbdev"
[ 214.942] (II) Unloading fbdev
[ 214.943] (II) UnloadSubModule: "fbdevhw"
[ 214.943] (II) Unloading fbdevhw
[ 214.943] (II) UnloadModule: "vesa"
[ 214.943] (II) Unloading vesa
[ 214.943] (==) Depth 24 pixmap format is 32 bpp
[ 215.517] (==) modeset(0): Backing store enabled
[ 215.517] (==) modeset(0): Silken mouse enabled
[ 215.525] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 215.540] (==) modeset(0): DPMS enabled
[ 215.541] (II) modeset(0): [DRI2] Setup complete
[ 215.541] (II) modeset(0): [DRI2] DRI driver: i965
[ 215.541] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 215.541] (--) RandR disabled
[ 215.560] (II) SELinux: Disabled on system
[ 215.580] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 215.580] (II) AIGLX: enabled GLX_ARB_create_context
[ 215.580] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 215.580] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 215.580] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 215.580] (II) AIGLX: enabled GLX_SGI_swap_control
[ 215.580] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 215.580] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 215.580] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 215.580] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 215.581] (II) AIGLX: Loaded and initialized i965
[ 215.581] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 215.607] (II) modeset(0): Damage tracking initialized
[ 215.607] (II) modeset(0): Setting screen physical size to 338 x 211
[ 216.334] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
[ 216.334] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 216.334] (II) LoadModule: "libinput"
[ 216.334] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 216.389] (II) Module libinput: vendor="X.Org Foundation"
[ 216.389] compiled for 1.19.0, module version = 0.23.0
[ 216.389] Module class: X.Org XInput Driver
[ 216.389] ABI class: X.Org XInput driver, version 24.1
[ 216.389] (II) Using input driver 'libinput' for 'Video Bus'
[ 216.390] (**) Video Bus: always reports core events
[ 216.390] (**) Option "Device" "/dev/input/event1"
[ 216.390] (**) Option "_source" "server/udev"
[ 216.390] (II) input device 'Video Bus', /dev/input/event1 is tagged by udev as: Keyboard
[ 216.390] (II) input device 'Video Bus', /dev/input/event1 is a keyboard
[ 216.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input14/event1"
[ 216.390] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 216.390] (**) Option "xkb_model" "pc105"
[ 216.391] (**) Option "xkb_layout" "us,ru"
[ 216.391] (**) Option "xkb_variant" ","
[ 216.391] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[ 216.451] (II) input device 'Video Bus', /dev/input/event1 is tagged by udev as: Keyboard
[ 216.451] (II) input device 'Video Bus', /dev/input/event1 is a keyboard
[ 216.451] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 216.452] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 216.452] (II) Using input driver 'libinput' for 'Power Button'
[ 216.452] (**) Power Button: always reports core events
[ 216.452] (**) Option "Device" "/dev/input/event5"
[ 216.452] (**) Option "_source" "server/udev"
[ 216.452] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 216.452] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 216.452] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event5"
[ 216.452] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 216.452] (**) Option "xkb_model" "pc105"
[ 216.452] (**) Option "xkb_layout" "us,ru"
[ 216.452] (**) Option "xkb_variant" ","
[ 216.452] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[ 216.453] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 216.453] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 216.453] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 216.453] (II) No input driver specified, ignoring this device.
[ 216.453] (II) This device may have been added with another device file.
[ 216.454] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 216.454] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 216.454] (II) Using input driver 'libinput' for 'Sleep Button'
[ 216.454] (**) Sleep Button: always reports core events
[ 216.454] (**) Option "Device" "/dev/input/event6"
[ 216.454] (**) Option "_source" "server/udev"
[ 216.454] (II) input device 'Sleep Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 216.454] (II) input device 'Sleep Button', /dev/input/event6 is a keyboard
[ 216.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13/event6"
[ 216.454] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 216.454] (**) Option "xkb_model" "pc105"
[ 216.454] (**) Option "xkb_layout" "us,ru"
[ 216.454] (**) Option "xkb_variant" ","
[ 216.454] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[ 216.456] (II) input device 'Sleep Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 216.456] (II) input device 'Sleep Button', /dev/input/event6 is a keyboard
[ 216.457] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 216.457] (II) No input driver specified, ignoring this device.
[ 216.457] (II) This device may have been added with another device file.
[ 216.457] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[ 216.457] (II) No input driver specified, ignoring this device.
[ 216.457] (II) This device may have been added with another device file.
[ 216.461] (II) config/udev: Adding input device HDA Intel Front Line Out (/dev/input/event9)
[ 216.461] (II) No input driver specified, ignoring this device.
[ 216.461] (II) This device may have been added with another device file.
[ 216.461] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 216.461] (II) No input driver specified, ignoring this device.
[ 216.461] (II) This device may have been added with another device file.
[ 216.462] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[ 216.462] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 216.462] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 216.462] (**) Logitech USB Optical Mouse: always reports core events
[ 216.462] (**) Option "Device" "/dev/input/event3"
[ 216.462] (**) Option "_source" "server/udev"
[ 216.520] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is tagged by udev as: Mouse
[ 216.520] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is a pointer caps
[ 216.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C06C.0007/input/input19/event3"
[ 216.522] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 216.522] (**) Option "AccelerationScheme" "none"
[ 216.522] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 216.522] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 216.522] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 216.580] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is tagged by udev as: Mouse
[ 216.580] (II) input device 'Logitech USB Optical Mouse', /dev/input/event3 is a pointer caps
[ 216.580] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 216.581] (II) No input driver specified, ignoring this device.
[ 216.581] (II) This device may have been added with another device file.
[ 216.581] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event13)
[ 216.581] (**) Broadcom Corp: Applying InputClass "libinput keyboard catchall"
[ 216.581] (II) Using input driver 'libinput' for 'Broadcom Corp'
[ 216.581] (**) Broadcom Corp: always reports core events
[ 216.581] (**) Option "Device" "/dev/input/event13"
[ 216.581] (**) Option "_source" "server/udev"
[ 216.582] (II) input device 'Broadcom Corp', /dev/input/event13 is tagged by udev as: Keyboard
[ 216.582] (II) input device 'Broadcom Corp', /dev/input/event13 is a keyboard
[ 216.582] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.2/5-2.2:1.0/0003:0A5C:4502.0008/input/input26/event13"
[ 216.582] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD, id 10)
[ 216.582] (**) Option "xkb_model" "pc105"
[ 216.582] (**) Option "xkb_layout" "us,ru"
[ 216.582] (**) Option "xkb_variant" ","
[ 216.582] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[ 216.583] (II) input device 'Broadcom Corp', /dev/input/event13 is tagged by udev as: Keyboard
[ 216.583] (II) input device 'Broadcom Corp', /dev/input/event13 is a keyboard
[ 216.583] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event14)
[ 216.583] (**) Broadcom Corp: Applying InputClass "libinput pointer catchall"
[ 216.583] (II) Using input driver 'libinput' for 'Broadcom Corp'
[ 216.584] (**) Broadcom Corp: always reports core events
[ 216.584] (**) Option "Device" "/dev/input/event14"
[ 216.584] (**) Option "_source" "server/udev"
[ 216.644] (II) input device 'Broadcom Corp', /dev/input/event14 is tagged by udev as: Mouse
[ 216.644] (II) input device 'Broadcom Corp', /dev/input/event14 is a pointer caps
[ 216.646] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:0A5C:4503.0009/input/input27/event14"
[ 216.646] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE, id 11)
[ 216.646] (**) Option "AccelerationScheme" "none"
[ 216.646] (**) Broadcom Corp: (accel) selected scheme none/0
[ 216.646] (**) Broadcom Corp: (accel) acceleration factor: 2.000
[ 216.646] (**) Broadcom Corp: (accel) acceleration threshold: 4
[ 216.704] (II) input device 'Broadcom Corp', /dev/input/event14 is tagged by udev as: Mouse
[ 216.704] (II) input device 'Broadcom Corp', /dev/input/event14 is a pointer caps
[ 216.705] (II) config/udev: Adding input device Broadcom Corp (/dev/input/mouse2)
[ 216.705] (II) No input driver specified, ignoring this device.
[ 216.705] (II) This device may have been added with another device file.
[ 216.705] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 216.705] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 216.705] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 216.705] (**) AT Translated Set 2 keyboard: always reports core events
[ 216.705] (**) Option "Device" "/dev/input/event0"
[ 216.705] (**) Option "_source" "server/udev"
[ 216.706] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 216.706] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 216.706] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 216.706] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 216.706] (**) Option "xkb_model" "pc105"
[ 216.706] (**) Option "xkb_layout" "us,ru"
[ 216.706] (**) Option "xkb_variant" ","
[ 216.706] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[ 216.706] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 216.706] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 216.707] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
[ 216.707] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"
[ 216.707] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 216.707] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 216.707] (II) LoadModule: "synaptics"
[ 216.707] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 216.730] (II) Module synaptics: vendor="X.Org Foundation"
[ 216.730] compiled for 1.19.0, module version = 1.9.0
[ 216.730] Module class: X.Org XInput Driver
[ 216.730] ABI class: X.Org XInput driver, version 24.1
[ 216.730] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 216.730] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 216.730] (**) Option "Device" "/dev/input/event11"
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 216.731] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 216.731] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 216.731] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input18/event11"
[ 216.731] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[ 216.731] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 216.731] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 216.731] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 216.731] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 216.731] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 216.731] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 216.731] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 216.731] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 216.732] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 216.732] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 216.732] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 216.732] (II) No input driver specified, ignoring this device.
[ 216.732] (II) This device may have been added with another device file.
[ 216.733] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[ 216.733] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 216.733] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 216.733] (**) Dell WMI hotkeys: always reports core events
[ 216.733] (**) Option "Device" "/dev/input/event12"
[ 216.733] (**) Option "_source" "server/udev"
[ 216.733] (II) input device 'Dell WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[ 216.733] (II) input device 'Dell WMI hotkeys', /dev/input/event12 is a keyboard
[ 216.734] (**) Option "config_info" "udev:/sys/devices/virtual/input/input25/event12"
[ 216.734] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 216.734] (**) Option "xkb_model" "pc105"
[ 216.734] (**) Option "xkb_layout" "us,ru"
[ 216.734] (**) Option "xkb_variant" ","
[ 216.734] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[ 216.734] (II) input device 'Dell WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[ 216.734] (II) input device 'Dell WMI hotkeys', /dev/input/event12 is a keyboard
[ 236.190] (II) modeset(0): EDID vendor "AUO", prod id 8820
[ 236.191] (II) modeset(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
[ 236.191] (II) modeset(0): Printing DDC gathered Modelines:
[ 236.191] (II) modeset(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1457 800 801 804 816 -hsync -vsync (48.9 kHz eP)
[ 236.205] (II) modeset(0): EDID vendor "AUO", prod id 8820
[ 236.205] (II) modeset(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
[ 236.205] (II) modeset(0): Printing DDC gathered Modelines:
[ 236.205] (II) modeset(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1457 800 801 804 816 -hsync -vsync (48.9 kHz eP)
[ 236.234] (II) modeset(0): EDID vendor "AUO", prod id 8820
[ 236.234] (II) modeset(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
[ 236.234] (II) modeset(0): Printing DDC gathered Modelines:
[ 236.234] (II) modeset(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1457 800 801 804 816 -hsync -vsync (48.9 kHz eP)
[ 236.247] (II) modeset(0): EDID vendor "AUO", prod id 8820
[ 236.247] (II) modeset(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
[ 236.247] (II) modeset(0): Printing DDC gathered Modelines:
[ 236.247] (II) modeset(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1457 800 801 804 816 -hsync -vsync (48.9 kHz eP)
[ 239.211] (II) modeset(0): EDID vendor "AUO", prod id 8820
[ 239.211] (II) modeset(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
[ 239.211] (II) modeset(0): Printing DDC gathered Modelines:
[ 239.211] (II) modeset(0): Modeline "1280x800"x0.0 71.26 1280 1296 1344 1457 800 801 804 816 -hsync -vsync (48.9 kHz eP)
[ 5109.258] (II) SYN_DROPPED event from "Logitech USB Optical Mouse" - some input events have been lost.
[ 22691.245] (II) SYN_DROPPED event from "Logitech USB Optical Mouse" - some input events have been lost.
[ 23535.050] (II) SYN_DROPPED event from "Logitech USB Optical Mouse" - some input events have been lost.
[ 27550.319] (II) SYN_DROPPED event from "Logitech USB Optical Mouse" - some input events have been lost.
[ 27817.110] (II) SYN_DROPPED event from "Logitech USB Optical Mouse" - some input events have been lost.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input14
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input14
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=201928797
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input14/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input14/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=202753118
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=201743590
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:PNP0C0C/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=201754967
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=201725796
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11/event4
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=201741209
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=201757008
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=201763522
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v8384p7616e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#2/beep0"
E: PRODUCT=1/8384/7616/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=202868996
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=1/8384/7616/1:card0/codec#2/beep0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202910108
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD,
E: NAME="HDA Intel Line"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=2000
E: TAGS=:seat:
E: USEC_INITIALIZED=202882783
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202928377
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel Front Line Out"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=202896815
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202941011
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=202911154
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202946472
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C06C.0007/input/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C06C.0007/input/input19
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_1-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c06c
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=6300
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v046DpC06Ce0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Optical Mouse"
E: PHYS="usb-0000:00:1d.1-1/input0"
E: PRODUCT=3/46d/c06c/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=202895620
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C06C.0007/input/input19/event3
N: input/event3
S: input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C06C.0007/input/input19/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c06c
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=6300
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c06c/111:usb-0000:00:1d.1-1
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202993230
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C06C.0007/input/input19/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C06C.0007/input/input19/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c06c
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=6300
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202924936
P: /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.2/5-2.2:1.0/0003:0A5C:4502.0008/input/input26
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.2/5-2.2:1.0/0003:0A5C:4502.0008/input/input26
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_2-usb-0_2_2_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=4502
E: ID_MODEL_ENC=4502
E: ID_MODEL_ID=4502
E: ID_PATH=pci-0000:00:1d.2-usb-0:2.2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_2-usb-0_2_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4502
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0003v0A5Cp4502e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="Broadcom Corp"
E: PHYS="usb-0000:00:1d.2-2.2/input0"
E: PRODUCT=3/a5c/4502/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=203021021
P: /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.2/5-2.2:1.0/0003:0A5C:4502.0008/input/input26/event13
N: input/event13
S: input/by-id/usb-Broadcom_Corp_4502-event-kbd
S: input/by-path/pci-0000:00:1d.2-usb-0:2.2:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.2-usb-0:2.2:1.0-event-kbd /dev/input/by-id/usb-Broadcom_Corp_4502-event-kbd
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.2/5-2.2:1.0/0003:0A5C:4502.0008/input/input26/event13
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=4502
E: ID_MODEL_ENC=4502
E: ID_MODEL_ID=4502
E: ID_PATH=pci-0000:00:1d.2-usb-0:2.2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_2-usb-0_2_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4502
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: LIBINPUT_DEVICE_GROUP=3/a5c/4502/111:usb-0000:00:1d.2-2
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=203064550
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,
P: /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:0A5C:4503.0009/input/input27
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:0A5C:4503.0009/input/input27
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_2-usb-0_2_3_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=4503
E: ID_MODEL_ENC=4503
E: ID_MODEL_ID=4503
E: ID_PATH=pci-0000:00:1d.2-usb-0:2.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_2-usb-0_2_3_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4503
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v0A5Cp4503e0111-e0,1,2,4,k110,111,112,r0,1,am4,lsfw
E: MSC=10
E: NAME="Broadcom Corp"
E: PHYS="usb-0000:00:1d.2-2.3/input0"
E: PRODUCT=3/a5c/4503/111
E: PROP=0
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=203050608
P: /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:0A5C:4503.0009/input/input27/event14
N: input/event14
S: input/by-id/usb-Broadcom_Corp_4503-event-mouse
S: input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-event-mouse /dev/input/by-id/usb-Broadcom_Corp_4503-event-mouse
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:0A5C:4503.0009/input/input27/event14
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=4503
E: ID_MODEL_ENC=4503
E: ID_MODEL_ID=4503
E: ID_PATH=pci-0000:00:1d.2-usb-0:2.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_2-usb-0_2_3_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4503
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: LIBINPUT_DEVICE_GROUP=3/a5c/4503/111:usb-0000:00:1d.2-2
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=203114808
P: /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:0A5C:4503.0009/input/input27/mouse2
N: input/mouse2
S: input/by-id/usb-Broadcom_Corp_4503-mouse
S: input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Broadcom_Corp_4503-mouse /dev/input/by-path/pci-0000:00:1d.2-usb-0:2.3:1.0-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2.3/5-2.3:1.0/0003:0A5C:4503.0009/input/input27/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=4503
E: ID_MODEL_ENC=4503
E: ID_MODEL_ID=4503
E: ID_PATH=pci-0000:00:1d.2-usb-0:2.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_2-usb-0_2_3_1_0
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4503
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=203057902
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=696325
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: KEYBOARD_KEY_81=playpause
E: KEYBOARD_KEY_82=stopcd
E: KEYBOARD_KEY_83=previoussong
E: KEYBOARD_KEY_84=nextsong
E: KEYBOARD_KEY_85=brightnessdown
E: KEYBOARD_KEY_86=brightnessup
E: KEYBOARD_KEY_87=battery
E: KEYBOARD_KEY_88=unknown
E: KEYBOARD_KEY_89=ejectclosecd
E: KEYBOARD_KEY_8a=suspend
E: KEYBOARD_KEY_8b=switchvideomode
E: KEYBOARD_KEY_8c=unknown
E: KEYBOARD_KEY_8f=switchvideomode
E: KEYBOARD_KEY_90=previoussong
E: KEYBOARD_KEY_91=prog1
E: KEYBOARD_KEY_92=media
E: KEYBOARD_KEY_93=unknown
E: KEYBOARD_KEY_95=camera
E: KEYBOARD_KEY_97=email
E: KEYBOARD_KEY_98=f21
E: KEYBOARD_KEY_99=nextsong
E: KEYBOARD_KEY_9a=setup
E: KEYBOARD_KEY_9b=switchvideomode
E: KEYBOARD_KEY_9e=f21
E: KEYBOARD_KEY_a2=playpause
E: KEYBOARD_KEY_a4=stopcd
E: KEYBOARD_KEY_d8=screenlock
E: KEYBOARD_KEY_d9=f21
E: KEYBOARD_KEY_ed=media
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab41:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=746406
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,
P: /devices/platform/i8042/serio2/input/input18
E: ABS=1000003
E: DEVPATH=/devices/platform/i8042/serio2/input/input18
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: KEY=420 70000 0 0 0 0
E: MODALIAS=input:b0011v0002p0008e0200-e0,1,3,k110,111,112,145,14A,ra0,1,18,mlsfw
E: NAME="AlpsPS/2 ALPS GlidePoint"
E: PHYS="isa0060/serio2/input0"
E: PRODUCT=11/2/8/200
E: PROP=1
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=202845393
P: /devices/platform/i8042/serio2/input/input18/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/platform/i8042/serio2/input/input18/event11
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: LIBINPUT_DEVICE_GROUP=11/2/8/200:isa0060/serio2
E: LIBINPUT_MODEL_ALPS_TOUCHPAD=1
E: LIBINPUT_MODEL_FIRMWARE_VERSION=200
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=203644574
P: /devices/platform/i8042/serio2/input/input18/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio2/input/input18/mouse1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202929526
P: /devices/platform/pcspkr/input/input17
E: DEVPATH=/devices/platform/pcspkr/input/input17
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=202793777
P: /devices/platform/pcspkr/input/input17/event2
N: input/event2
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/pcspkr/input/input17/event2
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=202832398
P: /devices/virtual/input/input25
E: DEVPATH=/devices/virtual/input/input25
E: EV=13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=800000000000 0 0 1100b00000800 200200000 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k95,A1,CB,E0,E1,E3,EC,F0,1AF,ram4,lsfw
E: MSC=10
E: NAME="Dell WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=202942711
P: /devices/virtual/input/input25/event12
N: input/event12
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/virtual/input/input25/event12
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: LIBINPUT_DEVICE_GROUP=19/0/0/0:wmi
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=202965134
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 9.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-3-amd64 (SMP w/1 CPU core)
Locale: LANG=ru_UA.UTF-8, LC_CTYPE=ru_UA.UTF-8 (charmap=UTF-8), LANGUAGE=ru_UA:ru (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-input-synaptics depends on:
ii libc6 2.24-11+deb9u1
ii libevdev2 1.5.6+dfsg-1
ii libx11-6 2:1.6.4-3
ii libxi6 2:1.7.9-1
ii libxtst6 2:1.2.3-1
ii xserver-xorg-core [xorg-input-abi-24] 2:1.19.2-1+deb9u1
xserver-xorg-input-synaptics recommends no packages.
Versions of packages xserver-xorg-input-synaptics suggests:
pn gpointing-device-settings <none>
pn touchfreeze <none>
-- no debconf information