Bug#855841: xserver-xorg-video-nouveau: X crashes on resume with GForce-320M and nouveau
Le 27/02/2017 à 20:14, Sven Joachim a écrit :
> On 2017-02-27 19:49 +0100, Xavier wrote:
>
>> Le 25/02/2017 à 20:52, Sven Joachim a écrit :
>>> On 2017-02-22 12:34 +0100, Xavier Guimard wrote:
>>>
>>>> using Debian testing with a MacBook-Air, X crashes since a few months
>>>> (no problem before) after resume, using Cinnamon or KDE. It doesn't
>>>> happend always but often (70%). You will find below both Xorg.1.log
>>>> (last crash) and Xorg.0.log (after reboot).
>>>
>>> That's most likely a kernel problem. Can you please send the output of
>>> the "dmesg" command after such a failure? You have to run dmesg as root
>>> for that.
>>>
>>> Cheers,
>>> Sven
>>
>> Hello,
>>
>> thanks for your response. Here is the dmesg during X crash
>
> Thanks. I don't see anything suspicious there, so I'm at a loss.
>
> Please try a 4.10 kernel from experimental[1], and if the problem
> persists, report the bug upstream. See the Nouveau Wiki[2] for
> instructions how to do it.
>
> Cheers,
> Sven
>
>
> 1. https://packages.debian.org/experimental/linux-image-4.10.0-trunk-amd64-unsigned
> 2. https://nouveau.freedesktop.org/wiki/Bugs/
Hello,
same problem with experimental kernel. Here are complete logs for last fail.
Cheers,
Xavier
[ 6.812] (--) Log file renamed from "/var/log/Xorg.pid-515.log" to "/var/log/Xorg.0.log"
[ 6.812]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 6.812] X Protocol Version 11, Revision 0
[ 6.812] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 6.812] Current Operating System: Linux mac-debian 4.9.0-2-amd64 #1 SMP Debian 4.9.13-1 (2017-02-27) x86_64
[ 6.812] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=135ebf4c-e64f-4d9e-957e-1a5d0677a7aa ro quiet usbcore.autosuspend=-1
[ 6.812] Build Date: 03 March 2017 03:14:41PM
[ 6.812] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 6.812] Current version of pixman: 0.34.0
[ 6.812] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.813] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.813] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 13 19:27:32 2017
[ 6.814] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.816] (==) No Layout section. Using the first Screen section.
[ 6.816] (==) No screen section available. Using defaults.
[ 6.816] (**) |-->Screen "Default Screen Section" (0)
[ 6.816] (**) | |-->Monitor "<default monitor>"
[ 6.816] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6.816] (==) Automatically adding devices
[ 6.816] (==) Automatically enabling devices
[ 6.816] (==) Automatically adding GPU devices
[ 6.817] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 6.916] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 6.916] Entry deleted from font path.
[ 6.925] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 6.925] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.925] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.925] (II) Loader magic: 0x55f55749ee00
[ 6.925] (II) Module ABI versions:
[ 6.925] X.Org ANSI C Emulation: 0.4
[ 6.925] X.Org Video Driver: 23.0
[ 6.925] X.Org XInput driver : 24.1
[ 6.925] X.Org Server Extension : 10.0
[ 6.933] (++) using VT number 7
[ 6.933] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 6.934] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.002] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072
[ 8.006] (II) LoadModule: "glx"
[ 8.020] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.032] (II) Module glx: vendor="X.Org Foundation"
[ 8.032] compiled for 1.19.2, module version = 1.0.0
[ 8.032] ABI class: X.Org Server Extension, version 10.0
[ 8.032] (==) Matched nouveau as autoconfigured driver 0
[ 8.032] (==) Matched nv as autoconfigured driver 1
[ 8.032] (==) Matched nouveau as autoconfigured driver 2
[ 8.032] (==) Matched nv as autoconfigured driver 3
[ 8.032] (==) Matched modesetting as autoconfigured driver 4
[ 8.032] (==) Matched fbdev as autoconfigured driver 5
[ 8.032] (==) Matched vesa as autoconfigured driver 6
[ 8.032] (==) Assigned the driver to the xf86ConfigLayout
[ 8.032] (II) LoadModule: "nouveau"
[ 8.032] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 8.035] (II) Module nouveau: vendor="X.Org Foundation"
[ 8.035] compiled for 1.19.0, module version = 1.0.13
[ 8.035] Module class: X.Org Video Driver
[ 8.035] ABI class: X.Org Video Driver, version 23.0
[ 8.035] (II) LoadModule: "nv"
[ 8.035] (WW) Warning, couldn't open module nv
[ 8.035] (II) UnloadModule: "nv"
[ 8.035] (II) Unloading nv
[ 8.035] (EE) Failed to load module "nv" (module does not exist, 0)
[ 8.035] (II) LoadModule: "modesetting"
[ 8.035] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.036] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.036] compiled for 1.19.2, module version = 1.19.2
[ 8.036] Module class: X.Org Video Driver
[ 8.036] ABI class: X.Org Video Driver, version 23.0
[ 8.036] (II) LoadModule: "fbdev"
[ 8.037] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 8.037] (II) Module fbdev: vendor="X.Org Foundation"
[ 8.037] compiled for 1.19.0, module version = 0.4.4
[ 8.037] Module class: X.Org Video Driver
[ 8.037] ABI class: X.Org Video Driver, version 23.0
[ 8.037] (II) LoadModule: "vesa"
[ 8.037] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.038] (II) Module vesa: vendor="X.Org Foundation"
[ 8.038] compiled for 1.19.0, module version = 2.3.4
[ 8.038] Module class: X.Org Video Driver
[ 8.038] ABI class: X.Org Video Driver, version 23.0
[ 8.038] (II) NOUVEAU driver Date: Tue Sep 20 00:31:06 2016 -0400
[ 8.038] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8.038] RIVA TNT (NV04)
[ 8.038] RIVA TNT2 (NV05)
[ 8.038] GeForce 256 (NV10)
[ 8.038] GeForce 2 (NV11, NV15)
[ 8.038] GeForce 4MX (NV17, NV18)
[ 8.038] GeForce 3 (NV20)
[ 8.038] GeForce 4Ti (NV25, NV28)
[ 8.038] GeForce FX (NV3x)
[ 8.038] GeForce 6 (NV4x)
[ 8.038] GeForce 7 (G7x)
[ 8.038] GeForce 8 (G8x)
[ 8.038] GeForce GTX 200 (NVA0)
[ 8.038] GeForce GTX 400 (NVC0)
[ 8.038] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.038] (II) FBDEV: driver for framebuffer: fbdev
[ 8.038] (II) VESA: driver for VESA chipsets: vesa
[ 8.042] (II) [drm] nouveau interface version: 1.3.1
[ 8.042] (WW) Falling back to old probe method for modesetting
[ 8.042] (WW) Falling back to old probe method for fbdev
[ 8.043] (II) Loading sub module "fbdevhw"
[ 8.043] (II) LoadModule: "fbdevhw"
[ 8.043] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 8.043] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 8.043] compiled for 1.19.2, module version = 0.0.2
[ 8.043] ABI class: X.Org Video Driver, version 23.0
[ 8.043] (WW) Falling back to old probe method for vesa
[ 8.043] (II) Loading sub module "dri2"
[ 8.043] (II) LoadModule: "dri2"
[ 8.043] (II) Module "dri2" already built-in
[ 8.043] (--) NOUVEAU(0): Chipset: "NVIDIA NVAF"
[ 8.044] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.044] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 8.044] (==) NOUVEAU(0): RGB weight 888
[ 8.044] (==) NOUVEAU(0): Default visual is TrueColor
[ 8.044] (==) NOUVEAU(0): Using HW cursor
[ 8.044] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 8.044] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 8.044] (==) NOUVEAU(0): Page flipping enabled
[ 8.044] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 8.044] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 8.044] (II) NOUVEAU(0): Initializing outputs ...
[ 8.062] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[ 8.124] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 8.124] (II) NOUVEAU(0): 2 crtcs needed for screen.
[ 8.130] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 8.130] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 8.147] (II) NOUVEAU(0): EDID for output eDP-1
[ 8.148] (II) NOUVEAU(0): Manufacturer: APP Model: 9cdf Serial#: 0
[ 8.148] (II) NOUVEAU(0): Year: 2010 Week: 35
[ 8.148] (II) NOUVEAU(0): EDID Version: 1.3
[ 8.148] (II) NOUVEAU(0): Digital Display Input
[ 8.148] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 29 vert.: 18
[ 8.148] (II) NOUVEAU(0): Gamma: 2.20
[ 8.148] (II) NOUVEAU(0): No DPMS capabilities specified
[ 8.148] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 8.148] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8.148] (II) NOUVEAU(0): redX: 0.593 redY: 0.342 greenX: 0.331 greenY: 0.573
[ 8.148] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
[ 8.148] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8.148] (II) NOUVEAU(0): Supported detailed timing:
[ 8.148] (II) NOUVEAU(0): clock: 91.5 MHz Image Size: 286 x 179 mm
[ 8.148] (II) NOUVEAU(0): h_active: 1440 h_sync: 1504 h_sync_end 1546 h_blank_end 1652 h_border: 0
[ 8.148] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
[ 8.148] (II) NOUVEAU(0): Unknown vendor-specific block 1
[ 8.148] (II) NOUVEAU(0): LP133WP1-TPA1
[ 8.148] (II) NOUVEAU(0): Monitor name: Color LCD
[ 8.148] (II) NOUVEAU(0): EDID (in hex):
[ 8.148] (II) NOUVEAU(0): 00ffffffffffff000610df9c00000000
[ 8.148] (II) NOUVEAU(0): 23140103801d12780aef059757549227
[ 8.148] (II) NOUVEAU(0): 22505400000001010101010101010101
[ 8.148] (II) NOUVEAU(0): 010101010101c223a0d450841a30402a
[ 8.148] (II) NOUVEAU(0): 36001eb3100000180000000100061030
[ 8.148] (II) NOUVEAU(0): 00000000000000000a20000000fe004c
[ 8.148] (II) NOUVEAU(0): 503133335750312d54504131000000fc
[ 8.148] (II) NOUVEAU(0): 00436f6c6f72204c43440a202020001f
[ 8.148] (II) NOUVEAU(0): Printing probed modes for output eDP-1
[ 8.148] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 8.148] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
[ 8.148] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 8.148] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 8.148] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 8.148] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 8.148] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 8.148] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 8.212] (II) NOUVEAU(0): EDID for output DP-1
[ 8.219] (II) NOUVEAU(0): Output eDP-1 connected
[ 8.219] (II) NOUVEAU(0): Output DP-1 disconnected
[ 8.219] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 8.219] (II) NOUVEAU(0): Output eDP-1 using initial mode 1440x900 +0+0
[ 8.219] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.219] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 8.219] (**) NOUVEAU(0): Driver mode "1440x900": 91.5 MHz (scaled from 0.0 MHz), 55.4 kHz, 59.8 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "1440x900"x59.8 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 8.219] (**) NOUVEAU(0): Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
[ 8.219] (**) NOUVEAU(0): Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 8.219] (**) NOUVEAU(0): Mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 8.219] (**) NOUVEAU(0): Mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 8.219] (**) NOUVEAU(0): Mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 8.219] (**) NOUVEAU(0): Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 8.219] (**) NOUVEAU(0): Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 8.219] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 8.219] (==) NOUVEAU(0): DPI set to (96, 96)
[ 8.219] (II) Loading sub module "fb"
[ 8.219] (II) LoadModule: "fb"
[ 8.219] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.404] (II) Module fb: vendor="X.Org Foundation"
[ 8.404] compiled for 1.19.2, module version = 1.0.0
[ 8.404] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.404] (II) Loading sub module "shadowfb"
[ 8.404] (II) LoadModule: "shadowfb"
[ 8.405] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 8.405] (II) Module shadowfb: vendor="X.Org Foundation"
[ 8.405] compiled for 1.19.2, module version = 1.0.0
[ 8.405] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.405] (II) UnloadModule: "modesetting"
[ 8.405] (II) Unloading modesetting
[ 8.405] (II) UnloadModule: "fbdev"
[ 8.405] (II) Unloading fbdev
[ 8.405] (II) UnloadSubModule: "fbdevhw"
[ 8.405] (II) Unloading fbdevhw
[ 8.405] (II) UnloadModule: "vesa"
[ 8.405] (II) Unloading vesa
[ 8.405] (--) Depth 24 pixmap format is 32 bpp
[ 8.413] (II) NOUVEAU(0): Channel setup complete.
[ 8.419] (EE) NOUVEAU(0): [COPY] failed to allocate class.
[ 8.445] (II) NOUVEAU(0): Hardware support for Present enabled
[ 8.445] (II) NOUVEAU(0): [DRI2] Setup complete
[ 8.445] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 8.445] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 8.445] (II) Loading sub module "exa"
[ 8.445] (II) LoadModule: "exa"
[ 8.445] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 8.446] (II) Module exa: vendor="X.Org Foundation"
[ 8.446] compiled for 1.19.2, module version = 2.6.0
[ 8.446] ABI class: X.Org Video Driver, version 23.0
[ 8.447] (II) EXA(0): Driver allocated offscreen pixmaps
[ 8.447] (II) EXA(0): Driver registered support for the following operations:
[ 8.447] (II) Solid
[ 8.447] (II) Copy
[ 8.447] (II) Composite (RENDER acceleration)
[ 8.447] (II) UploadToScreen
[ 8.447] (II) DownloadFromScreen
[ 8.447] (==) NOUVEAU(0): Backing store enabled
[ 8.447] (==) NOUVEAU(0): Silken mouse enabled
[ 8.447] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 8.447] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 8.447] (==) NOUVEAU(0): DPMS enabled
[ 8.447] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 8.448] (--) RandR disabled
[ 8.454] (II) SELinux: Disabled on system
[ 8.668] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 8.668] (II) AIGLX: enabled GLX_ARB_create_context
[ 8.668] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 8.668] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 8.668] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 8.668] (II) AIGLX: enabled GLX_SGI_swap_control
[ 8.668] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 8.668] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 8.668] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 8.668] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 8.670] (II) AIGLX: Loaded and initialized nouveau
[ 8.670] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.674] (II) NOUVEAU(0): NVEnterVT is called.
[ 8.702] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[ 8.702] resize called 1440 900
[ 8.912] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 8.912] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.912] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.912] (II) LoadModule: "libinput"
[ 8.912] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 8.925] (II) Module libinput: vendor="X.Org Foundation"
[ 8.925] compiled for 1.19.0, module version = 0.23.0
[ 8.925] Module class: X.Org XInput Driver
[ 8.925] ABI class: X.Org XInput driver, version 24.1
[ 8.925] (II) Using input driver 'libinput' for 'Power Button'
[ 8.925] (**) Power Button: always reports core events
[ 8.925] (**) Option "Device" "/dev/input/event3"
[ 8.926] (**) Option "_source" "server/udev"
[ 8.926] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 8.926] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 8.945] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 8.945] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.945] (**) Option "xkb_model" "pc105"
[ 8.945] (**) Option "xkb_layout" "fr"
[ 8.945] (**) Option "xkb_variant" "mac"
[ 8.945] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 8.992] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 8.992] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 8.993] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 8.994] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 8.994] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 8.994] (II) Using input driver 'libinput' for 'Video Bus'
[ 8.994] (**) Video Bus: always reports core events
[ 8.994] (**) Option "Device" "/dev/input/event4"
[ 8.994] (**) Option "_source" "server/udev"
[ 8.994] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[ 8.994] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[ 9.012] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input4/event4"
[ 9.012] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.012] (**) Option "xkb_model" "pc105"
[ 9.012] (**) Option "xkb_layout" "fr"
[ 9.012] (**) Option "xkb_variant" "mac"
[ 9.012] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.013] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[ 9.013] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[ 9.013] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 9.013] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.013] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.013] (II) Using input driver 'libinput' for 'Power Button'
[ 9.013] (**) Power Button: always reports core events
[ 9.013] (**) Option "Device" "/dev/input/event1"
[ 9.013] (**) Option "_source" "server/udev"
[ 9.014] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 9.014] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 9.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 9.020] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 9.020] (**) Option "xkb_model" "pc105"
[ 9.020] (**) Option "xkb_layout" "fr"
[ 9.020] (**) Option "xkb_variant" "mac"
[ 9.020] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.021] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 9.021] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 9.021] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 9.021] (II) No input driver specified, ignoring this device.
[ 9.021] (II) This device may have been added with another device file.
[ 9.022] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 9.022] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 9.022] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 9.022] (II) Using input driver 'libinput' for 'Sleep Button'
[ 9.022] (**) Sleep Button: always reports core events
[ 9.022] (**) Option "Device" "/dev/input/event2"
[ 9.022] (**) Option "_source" "server/udev"
[ 9.022] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 9.022] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 9.036] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 9.036] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 9.036] (**) Option "xkb_model" "pc105"
[ 9.036] (**) Option "xkb_layout" "fr"
[ 9.036] (**) Option "xkb_variant" "mac"
[ 9.036] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.037] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 9.037] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 9.037] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event8)
[ 9.038] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 9.038] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "libinput keyboard catchall"
[ 9.038] (II) Using input driver 'libinput' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 9.038] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 9.038] (**) Option "Device" "/dev/input/event8"
[ 9.038] (**) Option "_source" "server/udev"
[ 9.038] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is tagged by udev as: Keyboard
[ 9.038] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is a keyboard
[ 9.048] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/0003:05AC:0240.0001/input/input8/event8"
[ 9.048] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 10)
[ 9.048] (**) Option "xkb_model" "pc105"
[ 9.048] (**) Option "xkb_layout" "fr"
[ 9.048] (**) Option "xkb_variant" "mac"
[ 9.048] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.049] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is tagged by udev as: Keyboard
[ 9.049] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is a keyboard
[ 9.050] (II) config/udev: Adding input device bcm5974 (/dev/input/event6)
[ 9.050] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 9.050] (**) bcm5974: Applying InputClass "libinput touchpad catchall"
[ 9.050] (**) bcm5974: Applying InputClass "touchpad catchall"
[ 9.050] (**) bcm5974: Applying InputClass "Default clickpad buttons"
[ 9.050] (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[ 9.050] (II) LoadModule: "synaptics"
[ 9.050] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 9.056] (II) Module synaptics: vendor="X.Org Foundation"
[ 9.056] compiled for 1.19.0, module version = 1.9.0
[ 9.056] Module class: X.Org XInput Driver
[ 9.056] ABI class: X.Org XInput driver, version 24.1
[ 9.056] (II) Using input driver 'synaptics' for 'bcm5974'
[ 9.056] (**) bcm5974: always reports core events
[ 9.056] (**) Option "Device" "/dev/input/event6"
[ 9.117] (II) synaptics: bcm5974: found clickpad property
[ 9.117] (--) synaptics: bcm5974: x-axis range -4620 - 5140 (res 0)
[ 9.117] (--) synaptics: bcm5974: y-axis range -150 - 6600 (res 0)
[ 9.117] (--) synaptics: bcm5974: pressure range 0 - 256
[ 9.117] (--) synaptics: bcm5974: finger width range 0 - 16
[ 9.117] (--) synaptics: bcm5974: buttons: left double triple
[ 9.117] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x240
[ 9.117] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 9.117] (--) synaptics: bcm5974: touchpad found
[ 9.117] (**) bcm5974: always reports core events
[ 9.156] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
[ 9.156] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 11)
[ 9.156] (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
[ 9.156] (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
[ 9.156] (**) synaptics: bcm5974: (accel) AccelFactor is now 0.017
[ 9.157] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 9.157] (**) bcm5974: (accel) acceleration profile 1
[ 9.157] (**) bcm5974: (accel) acceleration factor: 2.000
[ 9.157] (**) bcm5974: (accel) acceleration threshold: 4
[ 9.162] (--) synaptics: bcm5974: touchpad found
[ 9.162] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse0)
[ 9.163] (**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
[ 9.163] (II) config/udev: Adding input device Built-in iSight (/dev/input/event7)
[ 9.163] (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
[ 9.163] (**) Built-in iSight: Applying InputClass "libinput keyboard catchall"
[ 9.163] (II) Using input driver 'libinput' for 'Built-in iSight'
[ 9.163] (**) Built-in iSight: always reports core events
[ 9.163] (**) Option "Device" "/dev/input/event7"
[ 9.163] (**) Option "_source" "server/udev"
[ 9.165] (II) input device 'Built-in iSight', /dev/input/event7 is tagged by udev as: Keyboard
[ 9.165] (II) input device 'Built-in iSight', /dev/input/event7 is a keyboard
[ 9.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input7/event7"
[ 9.200] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 12)
[ 9.200] (**) Option "xkb_model" "pc105"
[ 9.200] (**) Option "xkb_layout" "fr"
[ 9.200] (**) Option "xkb_variant" "mac"
[ 9.200] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.201] (II) input device 'Built-in iSight', /dev/input/event7 is tagged by udev as: Keyboard
[ 9.201] (II) input device 'Built-in iSight', /dev/input/event7 is a keyboard
[ 9.201] (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event11)
[ 9.201] (II) No input driver specified, ignoring this device.
[ 9.201] (II) This device may have been added with another device file.
[ 9.202] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 9.202] (II) No input driver specified, ignoring this device.
[ 9.202] (II) This device may have been added with another device file.
[ 9.202] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 9.202] (II) No input driver specified, ignoring this device.
[ 9.202] (II) This device may have been added with another device file.
[ 9.203] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 9.203] (II) No input driver specified, ignoring this device.
[ 9.203] (II) This device may have been added with another device file.
[ 9.203] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 9.204] (II) No input driver specified, ignoring this device.
[ 9.204] (II) This device may have been added with another device file.
[ 9.204] (II) config/udev: Adding input device Mouseemu virtual keyboard (/dev/input/event9)
[ 9.204] (**) Mouseemu virtual keyboard: Applying InputClass "evdev keyboard catchall"
[ 9.204] (**) Mouseemu virtual keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.204] (II) Using input driver 'libinput' for 'Mouseemu virtual keyboard'
[ 9.205] (**) Mouseemu virtual keyboard: always reports core events
[ 9.205] (**) Option "Device" "/dev/input/event9"
[ 9.205] (**) Option "_source" "server/udev"
[ 9.205] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is tagged by udev as: Keyboard
[ 9.205] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is a keyboard
[ 9.224] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event9"
[ 9.224] (II) XINPUT: Adding extended input device "Mouseemu virtual keyboard" (type: KEYBOARD, id 13)
[ 9.224] (**) Option "xkb_model" "pc105"
[ 9.224] (**) Option "xkb_layout" "fr"
[ 9.224] (**) Option "xkb_variant" "mac"
[ 9.224] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.225] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is tagged by udev as: Keyboard
[ 9.225] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is a keyboard
[ 9.225] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/event10)
[ 9.225] (**) Mouseemu virtual mouse: Applying InputClass "evdev pointer catchall"
[ 9.225] (**) Mouseemu virtual mouse: Applying InputClass "libinput pointer catchall"
[ 9.225] (II) Using input driver 'libinput' for 'Mouseemu virtual mouse'
[ 9.225] (**) Mouseemu virtual mouse: always reports core events
[ 9.225] (**) Option "Device" "/dev/input/event10"
[ 9.225] (**) Option "_source" "server/udev"
[ 9.226] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is tagged by udev as: Mouse
[ 9.226] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is a pointer caps
[ 9.252] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event10"
[ 9.255] (II) XINPUT: Adding extended input device "Mouseemu virtual mouse" (type: MOUSE, id 14)
[ 9.255] (**) Option "AccelerationScheme" "none"
[ 9.255] (**) Mouseemu virtual mouse: (accel) selected scheme none/0
[ 9.255] (**) Mouseemu virtual mouse: (accel) acceleration factor: 2.000
[ 9.255] (**) Mouseemu virtual mouse: (accel) acceleration threshold: 4
[ 9.255] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is tagged by udev as: Mouse
[ 9.256] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is a pointer caps
[ 9.256] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/mouse1)
[ 9.256] (II) No input driver specified, ignoring this device.
[ 9.256] (II) This device may have been added with another device file.
[ 9.277] (II) config/udev: removing device Power Button
[ 9.287] (II) UnloadModule: "libinput"
[ 9.288] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 9.288] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.288] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.288] (II) Using input driver 'libinput' for 'Power Button'
[ 9.288] (**) Power Button: always reports core events
[ 9.288] (**) Option "Device" "/dev/input/event3"
[ 9.288] (**) Option "_source" "server/udev"
[ 9.288] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 9.288] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 9.308] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 9.308] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.308] (**) Option "xkb_model" "pc105"
[ 9.308] (**) Option "xkb_layout" "fr"
[ 9.308] (**) Option "xkb_variant" "mac"
[ 9.308] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.309] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 9.309] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 9.309] (II) config/udev: removing device Video Bus
[ 9.330] (II) UnloadModule: "libinput"
[ 9.331] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 9.331] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 9.331] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.331] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.331] (**) Video Bus: always reports core events
[ 9.331] (**) Option "Device" "/dev/input/event4"
[ 9.331] (**) Option "_source" "server/udev"
[ 9.331] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[ 9.331] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[ 9.340] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input4/event4"
[ 9.340] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.340] (**) Option "xkb_model" "pc105"
[ 9.340] (**) Option "xkb_layout" "fr"
[ 9.340] (**) Option "xkb_variant" "mac"
[ 9.340] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.341] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[ 9.341] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[ 9.341] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 9.341] (II) No input driver specified, ignoring this device.
[ 9.341] (II) This device may have been added with another device file.
[ 9.342] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 9.342] (II) No input driver specified, ignoring this device.
[ 9.342] (II) This device may have been added with another device file.
[ 9.342] (II) config/udev: removing device Power Button
[ 9.360] (II) UnloadModule: "libinput"
[ 9.360] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 9.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.360] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.360] (II) Using input driver 'libinput' for 'Power Button'
[ 9.360] (**) Power Button: always reports core events
[ 9.360] (**) Option "Device" "/dev/input/event1"
[ 9.360] (**) Option "_source" "server/udev"
[ 9.361] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 9.361] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 9.368] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 9.368] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 9.368] (**) Option "xkb_model" "pc105"
[ 9.368] (**) Option "xkb_layout" "fr"
[ 9.368] (**) Option "xkb_variant" "mac"
[ 9.368] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.369] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 9.369] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 9.369] (II) config/udev: removing device Sleep Button
[ 9.388] (II) UnloadModule: "libinput"
[ 9.388] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 9.388] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 9.388] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 9.388] (II) Using input driver 'libinput' for 'Sleep Button'
[ 9.388] (**) Sleep Button: always reports core events
[ 9.388] (**) Option "Device" "/dev/input/event2"
[ 9.388] (**) Option "_source" "server/udev"
[ 9.389] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 9.389] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 9.400] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 9.400] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 9.400] (**) Option "xkb_model" "pc105"
[ 9.400] (**) Option "xkb_layout" "fr"
[ 9.400] (**) Option "xkb_variant" "mac"
[ 9.400] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.401] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 9.401] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 9.401] (II) config/udev: Adding input device (unnamed) (/dev/input/mouse1)
[ 9.401] (II) No input driver specified, ignoring this device.
[ 9.401] (II) This device may have been added with another device file.
[ 9.402] (II) config/udev: removing device Apple Inc. Apple Internal Keyboard / Trackpad
[ 9.424] (II) UnloadModule: "libinput"
[ 9.424] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event8)
[ 9.424] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[ 9.424] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "libinput keyboard catchall"
[ 9.424] (II) Using input driver 'libinput' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[ 9.424] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[ 9.424] (**) Option "Device" "/dev/input/event8"
[ 9.424] (**) Option "_source" "server/udev"
[ 9.425] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is tagged by udev as: Keyboard
[ 9.425] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is a keyboard
[ 9.436] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/0003:05AC:0240.0001/input/input8/event8"
[ 9.436] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 10)
[ 9.436] (**) Option "xkb_model" "pc105"
[ 9.436] (**) Option "xkb_layout" "fr"
[ 9.436] (**) Option "xkb_variant" "mac"
[ 9.436] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.437] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is tagged by udev as: Keyboard
[ 9.437] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is a keyboard
[ 9.437] (II) config/udev: removing device Built-in iSight
[ 9.472] (II) UnloadModule: "libinput"
[ 9.473] (II) config/udev: Adding input device Built-in iSight (/dev/input/event7)
[ 9.473] (**) Built-in iSight: Applying InputClass "evdev keyboard catchall"
[ 9.473] (**) Built-in iSight: Applying InputClass "libinput keyboard catchall"
[ 9.473] (II) Using input driver 'libinput' for 'Built-in iSight'
[ 9.473] (**) Built-in iSight: always reports core events
[ 9.473] (**) Option "Device" "/dev/input/event7"
[ 9.473] (**) Option "_source" "server/udev"
[ 9.474] (II) input device 'Built-in iSight', /dev/input/event7 is tagged by udev as: Keyboard
[ 9.474] (II) input device 'Built-in iSight', /dev/input/event7 is a keyboard
[ 9.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input7/event7"
[ 9.504] (II) XINPUT: Adding extended input device "Built-in iSight" (type: KEYBOARD, id 12)
[ 9.504] (**) Option "xkb_model" "pc105"
[ 9.504] (**) Option "xkb_layout" "fr"
[ 9.504] (**) Option "xkb_variant" "mac"
[ 9.504] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.505] (II) input device 'Built-in iSight', /dev/input/event7 is tagged by udev as: Keyboard
[ 9.505] (II) input device 'Built-in iSight', /dev/input/event7 is a keyboard
[ 9.506] (II) config/udev: removing device bcm5974
[ 9.548] (II) UnloadModule: "synaptics"
[ 9.549] (II) config/udev: Adding input device bcm5974 (/dev/input/event6)
[ 9.549] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[ 9.549] (**) bcm5974: Applying InputClass "libinput touchpad catchall"
[ 9.549] (**) bcm5974: Applying InputClass "touchpad catchall"
[ 9.549] (**) bcm5974: Applying InputClass "Default clickpad buttons"
[ 9.549] (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[ 9.549] (II) Using input driver 'synaptics' for 'bcm5974'
[ 9.549] (**) bcm5974: always reports core events
[ 9.549] (**) Option "Device" "/dev/input/event6"
[ 9.597] (II) synaptics: bcm5974: found clickpad property
[ 9.597] (--) synaptics: bcm5974: x-axis range -4620 - 5140 (res 0)
[ 9.597] (--) synaptics: bcm5974: y-axis range -150 - 6600 (res 0)
[ 9.597] (--) synaptics: bcm5974: pressure range 0 - 256
[ 9.597] (--) synaptics: bcm5974: finger width range 0 - 16
[ 9.597] (--) synaptics: bcm5974: buttons: left double triple
[ 9.597] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x240
[ 9.597] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[ 9.597] (--) synaptics: bcm5974: touchpad found
[ 9.597] (**) bcm5974: always reports core events
[ 9.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6/event6"
[ 9.640] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 11)
[ 9.640] (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
[ 9.640] (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
[ 9.640] (**) synaptics: bcm5974: (accel) AccelFactor is now 0.017
[ 9.640] (**) bcm5974: (accel) keeping acceleration scheme 1
[ 9.640] (**) bcm5974: (accel) acceleration profile 1
[ 9.640] (**) bcm5974: (accel) acceleration factor: 2.000
[ 9.640] (**) bcm5974: (accel) acceleration threshold: 4
[ 9.645] (--) synaptics: bcm5974: touchpad found
[ 9.646] (II) config/udev: Adding input device (unnamed) (/dev/input/event10)
[ 9.646] (**) (unnamed): Applying InputClass "evdev pointer catchall"
[ 9.646] (**) (unnamed): Applying InputClass "libinput pointer catchall"
[ 9.646] (II) Using input driver 'libinput' for '(unnamed)'
[ 9.646] (**) (unnamed): always reports core events
[ 9.646] (**) Option "Device" "/dev/input/event10"
[ 9.646] (**) Option "_source" "server/udev"
[ 9.646] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is tagged by udev as: Mouse
[ 9.646] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is a pointer caps
[ 9.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/0003:05AC:820B.0004/input/input10/event10"
[ 9.663] (II) XINPUT: Adding extended input device "(unnamed)" (type: MOUSE, id 15)
[ 9.663] (**) Option "AccelerationScheme" "none"
[ 9.663] (**) (unnamed): (accel) selected scheme none/0
[ 9.663] (**) (unnamed): (accel) acceleration factor: 2.000
[ 9.663] (**) (unnamed): (accel) acceleration threshold: 4
[ 9.664] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is tagged by udev as: Mouse
[ 9.664] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is a pointer caps
[ 9.665] (II) config/udev: removing device (unnamed)
[ 9.684] (II) UnloadModule: "libinput"
[ 9.684] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/mouse1)
[ 9.684] (II) No input driver specified, ignoring this device.
[ 9.684] (II) This device may have been added with another device file.
[ 9.685] (II) config/udev: removing device Mouseemu virtual keyboard
[ 9.696] (II) UnloadModule: "libinput"
[ 9.696] (II) config/udev: Adding input device Mouseemu virtual keyboard (/dev/input/event9)
[ 9.696] (**) Mouseemu virtual keyboard: Applying InputClass "evdev keyboard catchall"
[ 9.696] (**) Mouseemu virtual keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.696] (II) Using input driver 'libinput' for 'Mouseemu virtual keyboard'
[ 9.696] (**) Mouseemu virtual keyboard: always reports core events
[ 9.696] (**) Option "Device" "/dev/input/event9"
[ 9.696] (**) Option "_source" "server/udev"
[ 9.697] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is tagged by udev as: Keyboard
[ 9.697] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is a keyboard
[ 9.712] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event9"
[ 9.712] (II) XINPUT: Adding extended input device "Mouseemu virtual keyboard" (type: KEYBOARD, id 13)
[ 9.712] (**) Option "xkb_model" "pc105"
[ 9.712] (**) Option "xkb_layout" "fr"
[ 9.712] (**) Option "xkb_variant" "mac"
[ 9.712] (**) Option "xkb_options" "lv3:switch,compose:lwin"
[ 9.712] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is tagged by udev as: Keyboard
[ 9.713] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is a keyboard
[ 9.713] (II) config/udev: removing device Mouseemu virtual mouse
[ 9.736] (II) UnloadModule: "libinput"
[ 9.736] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/event10)
[ 9.736] (**) Mouseemu virtual mouse: Applying InputClass "evdev pointer catchall"
[ 9.736] (**) Mouseemu virtual mouse: Applying InputClass "libinput pointer catchall"
[ 9.736] (II) Using input driver 'libinput' for 'Mouseemu virtual mouse'
[ 9.736] (**) Mouseemu virtual mouse: always reports core events
[ 9.736] (**) Option "Device" "/dev/input/event10"
[ 9.736] (**) Option "_source" "server/udev"
[ 9.737] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is tagged by udev as: Mouse
[ 9.737] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is a pointer caps
[ 9.776] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event10"
[ 9.776] (II) XINPUT: Adding extended input device "Mouseemu virtual mouse" (type: MOUSE, id 14)
[ 9.776] (**) Option "AccelerationScheme" "none"
[ 9.776] (**) Mouseemu virtual mouse: (accel) selected scheme none/0
[ 9.776] (**) Mouseemu virtual mouse: (accel) acceleration factor: 2.000
[ 9.776] (**) Mouseemu virtual mouse: (accel) acceleration threshold: 4
[ 9.776] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is tagged by udev as: Mouse
[ 9.776] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is a pointer caps
[ 9.777] (II) config/udev: Adding input device HDA NVidia Headphone (/dev/input/event11)
[ 9.777] (II) No input driver specified, ignoring this device.
[ 9.777] (II) This device may have been added with another device file.
[ 9.778] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 9.778] (II) No input driver specified, ignoring this device.
[ 9.778] (II) This device may have been added with another device file.
[ 9.779] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 9.779] (II) No input driver specified, ignoring this device.
[ 9.779] (II) This device may have been added with another device file.
[ 9.783] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[ 9.784] (II) No input driver specified, ignoring this device.
[ 9.784] (II) This device may have been added with another device file.
[ 9.784] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:17.0/0000:02:00.0/drm/card0 /dev/dri/card0
[ 9.784] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:17.0/0000:02:00.0/drm/card0
[ 9.784] failed to find screen to remove
[ 21.820] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 21.821] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 21.821] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 22.352] resize called 1440 900
[ 25.403] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 25.403] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 25.403] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 26.009] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 26.009] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 26.009] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 10662.964] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 10662.964] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 10662.964] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 10663.067] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 10663.067] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 10663.067] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 10663.147] resize called 1440 900
[ 10666.884] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 10666.884] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 10666.884] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 10666.984] resize called 1440 900
[ 15679.307] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 15679.307] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15679.307] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 15679.423] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 15679.423] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15679.423] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 15679.503] resize called 1440 900
[ 15683.092] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 15683.092] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15683.092] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 15683.199] resize called 1440 900
[ 20576.911] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 20576.912] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 20576.913] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 20577.015] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 20577.016] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 20577.016] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 20577.104] resize called 1440 900
[ 20580.824] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 20580.824] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 20580.824] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 20580.918] resize called 1440 900
[ 20602.281] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 20602.281] (II) NOUVEAU(0): NVLeaveVT is called.
[ 20618.375] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 20618.375] (II) NOUVEAU(0): NVEnterVT is called.
[ 20618.424] (II) NOUVEAU(0): EDID vendor "APP", prod id 40159
[ 20618.424] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 20618.424] (II) NOUVEAU(0): Modeline "1440x900"x0.0 91.54 1440 1504 1546 1652 900 903 909 926 -hsync -vsync (55.4 kHz eP)
[ 20618.493] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 20618.493] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 20618.495] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[ 20618.495] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[ 20618.496] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 20618.496] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 20618.497] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 20618.497] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 20618.498] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is tagged by udev as: Keyboard
[ 20618.498] (II) input device 'Apple Inc. Apple Internal Keyboard / Trackpad', /dev/input/event8 is a keyboard
[ 20618.499] (II) input device 'Built-in iSight', /dev/input/event7 is tagged by udev as: Keyboard
[ 20618.499] (II) input device 'Built-in iSight', /dev/input/event7 is a keyboard
[ 20618.504] (--) synaptics: bcm5974: touchpad found
[ 20618.506] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is tagged by udev as: Keyboard
[ 20618.506] (II) input device 'Mouseemu virtual keyboard', /dev/input/event9 is a keyboard
[ 20618.507] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is tagged by udev as: Mouse
[ 20618.507] (II) input device 'Mouseemu virtual mouse', /dev/input/event10 is a pointer caps
[ 20621.236] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 20621.236] (II) NOUVEAU(0): NVLeaveVT is called.
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=135ebf4c-e64f-4d9e-957e-1a5d0677a7aa ro quiet usbcore.autosuspend=-1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000af000000-0x00000000beffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bf718fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf719000-0x00000000bf938fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf939000-0x00000000bf953fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf954000-0x00000000bf96afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf96b000-0x00000000bf96dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf96e000-0x00000000bf99afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf99b000-0x00000000bf9affff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9b0000-0x00000000bf9dafff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf9db000-0x00000000bfef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfef9000-0x00000000bfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3200000-0x00000000d3200fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0xbf96a000 ACPI 2.0=0xbf96a014 SMBIOS=0xbf71a000
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookAir3,2/Mac-942C5DF58193131B, BIOS MBA31.88Z.0061.B01.1011181342 11/18/10
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbfef9 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff9694c0099000] 99000 size 24576
[ 0.000000] BRK [0x74d2b000, 0x74d2bfff] PGTABLE
[ 0.000000] BRK [0x74d2c000, 0x74d2cfff] PGTABLE
[ 0.000000] BRK [0x74d2d000, 0x74d2dfff] PGTABLE
[ 0.000000] BRK [0x74d2e000, 0x74d2efff] PGTABLE
[ 0.000000] BRK [0x74d2f000, 0x74d2ffff] PGTABLE
[ 0.000000] BRK [0x74d30000, 0x74d30fff] PGTABLE
[ 0.000000] BRK [0x74d31000, 0x74d31fff] PGTABLE
[ 0.000000] BRK [0x74d32000, 0x74d32fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b08000-0x36d7bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BF96A014 000024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 0x00000000BF96A1C0 000084 (v01 APPLE Apple00 00000061 01000013)
[ 0.000000] ACPI: FACP 0x00000000BF968000 0000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000BF95B000 00572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BF71E000 000040
[ 0.000000] ACPI: FACS 0x00000000BF71E000 000040
[ 0.000000] ACPI: HPET 0x00000000BF967000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 0x00000000BF966000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 0x00000000BF965000 000068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 0x00000000BF963000 0000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 0x00000000BF962000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 0x00000000BF961000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BF958000 000107 (v01 APPLE SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BF957000 000024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BF956000 0000FC (v01 APPLE SDCard 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BF954000 0004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: MCFG 0x00000000BF964000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000aeffffff]
[ 0.000000] node 0: [mem 0x00000000bf000000-0x00000000bf718fff]
[ 0.000000] node 0: [mem 0x00000000bf939000-0x00000000bf953fff]
[ 0.000000] node 0: [mem 0x00000000bf96b000-0x00000000bf96dfff]
[ 0.000000] node 0: [mem 0x00000000bf99b000-0x00000000bf9affff]
[ 0.000000] node 0: [mem 0x00000000bf9db000-0x00000000bfef8fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 982024
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 23 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11186 pages used for memmap
[ 0.000000] DMA32 zone: 715882 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xbeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf719000-0xbf938fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf954000-0xbf96afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf96e000-0xbf99afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf9b0000-0xbf9dafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfef9000-0xbfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xd31fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd3200000-0xd3200fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd3201000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xd3201000-0xffbfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9695ffc00000 s103384 r8192 d31784 u1048576
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966655
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=135ebf4c-e64f-4d9e-957e-1a5d0677a7aa ro quiet usbcore.autosuspend=-1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3708884K/3928096K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 219212K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2123.606 MHz processor
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4247.21 BogoMIPS (lpj=8494424)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004038] ACPI: Core revision 20160831
[ 0.012935] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.026297] Security Framework initialized
[ 0.026300] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.026308] AppArmor: AppArmor disabled by boot time parameter
[ 0.026646] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028785] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.029748] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.029754] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.030190] CPU: Physical Processor ID: 0
[ 0.030191] CPU: Processor Core ID: 0
[ 0.030193] mce: CPU supports 6 MCE banks
[ 0.030201] CPU0: Thermal monitoring enabled (TM2)
[ 0.030206] process: using mwait in idle threads
[ 0.030211] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.030213] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.030645] Freeing SMP alternatives memory: 24K (ffffffff8b878000 - ffffffff8b87e000)
[ 0.035334] ftrace: allocating 24999 entries in 98 pages
[ 0.044105] smpboot: Max logical packages: 1
[ 0.044564] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9600 @ 2.13GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.088000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.088000] ... version: 2
[ 0.088000] ... bit width: 40
[ 0.088000] ... generic registers: 2
[ 0.088000] ... value mask: 000000ffffffffff
[ 0.088000] ... max period: 000000007fffffff
[ 0.088000] ... fixed-purpose events: 3
[ 0.088000] ... event mask: 0000000700000003
[ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088000] x86: Booting SMP configuration:
[ 0.088000] .... node #0, CPUs: #1
[ 0.170029] x86: Booted up 1 node, 2 CPUs
[ 0.170029] smpboot: Total of 2 processors activated (8494.82 BogoMIPS)
[ 0.172256] devtmpfs: initialized
[ 0.172256] x86/mm: Memory block size: 128MB
[ 0.176003] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.176003] PM: Registering ACPI NVS region [mem 0xbf719000-0xbf938fff] (2228224 bytes)
[ 0.176003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.176003] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.176003] pinctrl core: initialized pinctrl subsystem
[ 0.176041] NET: Registered protocol family 16
[ 0.188004] cpuidle: using governor ladder
[ 0.200003] cpuidle: using governor menu
[ 0.200035] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.200036] ACPI: bus type PCI registered
[ 0.200038] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200331] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.200333] PCI: not using MMCONFIG
[ 0.200334] PCI: Using configuration type 1 for base access
[ 0.212050] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.212065] ACPI: Disabled all _OSI OS vendors
[ 0.212066] ACPI: Added _OSI(Module Device)
[ 0.212067] ACPI: Added _OSI(Processor Device)
[ 0.212068] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.212069] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.212070] ACPI: Added _OSI(Darwin)
[ 0.212076] ACPI : EC: EC started
[ 0.268262] ACPI: \: Used as first EC
[ 0.268264] ACPI: \: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.268266] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.270358] ACPI: BIOS _OSI(Darwin) query honored via DMI
[ 0.271757] ACPI: Dynamic OEM Table Load:
[ 0.271766] ACPI: SSDT 0xFFFF9695FA994000 00023D (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.271978] ACPI: Dynamic OEM Table Load:
[ 0.271985] ACPI: SSDT 0xFFFF9695FA98E800 0005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.272232] ACPI: Dynamic OEM Table Load:
[ 0.272232] ACPI: SSDT 0xFFFF9695FA98DF00 0000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.272372] ACPI: Dynamic OEM Table Load:
[ 0.272378] ACPI: SSDT 0xFFFF9695FA9A3900 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.272456] ACPI : EC: EC stopped
[ 0.272456] ACPI : EC: EC started
[ 0.328050] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.328053] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.328055] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.328055] ACPI: Interpreter enabled
[ 0.328076] ACPI: (supports S0 S3 S4 S5)
[ 0.328077] ACPI: Using IOAPIC for interrupt routing
[ 0.328105] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.328424] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in ACPI motherboard resources
[ 0.328433] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.454044] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.454049] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
[ 0.454061] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-02] only partially covers this bridge
[ 0.454336] PCI host bridge to bus 0000:00
[ 0.454339] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.454340] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.454342] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.454344] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.454345] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.454347] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.454349] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.454350] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.454352] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.454353] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.454355] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.454357] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.454358] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.454360] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.454361] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.454363] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.454365] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.454366] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.454383] pci 0000:00:00.0: [10de:0d60] type 00 class 0x060000
[ 0.454592] pci 0000:00:00.1: [10de:0d68] type 00 class 0x050000
[ 0.454821] pci 0000:00:01.0: [10de:0d6d] type 00 class 0x050000
[ 0.455036] pci 0000:00:01.1: [10de:0d6e] type 00 class 0x050000
[ 0.455255] pci 0000:00:01.2: [10de:0d6f] type 00 class 0x050000
[ 0.455468] pci 0000:00:01.3: [10de:0d70] type 00 class 0x050000
[ 0.455686] pci 0000:00:02.0: [10de:0d71] type 00 class 0x050000
[ 0.455899] pci 0000:00:02.1: [10de:0d72] type 00 class 0x050000
[ 0.456115] pci 0000:00:03.0: [10de:0d80] type 00 class 0x060100
[ 0.456124] pci 0000:00:03.0: reg 0x10: [io 0x2100-0x21ff]
[ 0.456257] pci 0000:00:03.1: [10de:0d7b] type 00 class 0x050000
[ 0.456410] pci 0000:00:03.2: [10de:0d79] type 00 class 0x0c0500
[ 0.456422] pci 0000:00:03.2: reg 0x10: [io 0x2000-0x20ff]
[ 0.456430] pci 0000:00:03.2: reg 0x14: [mem 0xd3286000-0xd3287fff]
[ 0.456446] pci 0000:00:03.2: reg 0x20: [io 0x2240-0x227f]
[ 0.456452] pci 0000:00:03.2: reg 0x24: [io 0x2200-0x223f]
[ 0.456488] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.456603] pci 0000:00:03.3: [10de:0d69] type 00 class 0x050000
[ 0.456849] pci 0000:00:03.4: [10de:0d7a] type 00 class 0x0b4000
[ 0.456870] pci 0000:00:03.4: reg 0x10: [mem 0xd3200000-0xd327ffff]
[ 0.457100] pci 0000:00:04.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.457111] pci 0000:00:04.0: reg 0x10: [mem 0xd328a000-0xd328afff]
[ 0.457163] pci 0000:00:04.0: supports D1 D2
[ 0.457164] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457263] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.457320] pci 0000:00:04.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.457332] pci 0000:00:04.1: reg 0x10: [mem 0xd328b100-0xd328b1ff]
[ 0.457389] pci 0000:00:04.1: supports D1 D2
[ 0.457391] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457504] pci 0000:00:04.1: System wakeup disabled by ACPI
[ 0.457570] pci 0000:00:06.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.457582] pci 0000:00:06.0: reg 0x10: [mem 0xd3289000-0xd3289fff]
[ 0.457633] pci 0000:00:06.0: supports D1 D2
[ 0.457635] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457730] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.457786] pci 0000:00:06.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.457798] pci 0000:00:06.1: reg 0x10: [mem 0xd328b000-0xd328b0ff]
[ 0.457855] pci 0000:00:06.1: supports D1 D2
[ 0.457857] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457963] pci 0000:00:06.1: System wakeup disabled by ACPI
[ 0.458028] pci 0000:00:08.0: [10de:0d94] type 00 class 0x040300
[ 0.458039] pci 0000:00:08.0: reg 0x10: [mem 0xd3280000-0xd3283fff]
[ 0.458090] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.458212] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
[ 0.458222] pci 0000:00:0a.0: reg 0x10: [io 0x2298-0x229f]
[ 0.458228] pci 0000:00:0a.0: reg 0x14: [io 0x22a4-0x22a7]
[ 0.458234] pci 0000:00:0a.0: reg 0x18: [io 0x2290-0x2297]
[ 0.458239] pci 0000:00:0a.0: reg 0x1c: [io 0x22a0-0x22a3]
[ 0.458245] pci 0000:00:0a.0: reg 0x20: [io 0x2280-0x228f]
[ 0.458250] pci 0000:00:0a.0: reg 0x24: [mem 0xd3284000-0xd3285fff]
[ 0.458415] pci 0000:00:0b.0: [10de:0d75] type 00 class 0x050000
[ 0.458426] pci 0000:00:0b.0: reg 0x10: [mem 0xd3288000-0xd3288fff]
[ 0.458607] pci 0000:00:15.0: [10de:0d9b] type 01 class 0x060400
[ 0.458858] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.458998] pci 0000:00:17.0: [10de:0d76] type 01 class 0x060400
[ 0.459038] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.459307] pci 0000:01:00.0: [14e4:4353] type 00 class 0x028000
[ 0.459329] pci 0000:01:00.0: reg 0x10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.459466] pci 0000:01:00.0: supports D1 D2
[ 0.459468] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.459508] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.459629] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.459651] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.459722] pci 0000:02:00.0: [10de:08a3] type 00 class 0x030000
[ 0.459733] pci 0000:02:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.459741] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.459749] pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.459754] pci 0000:02:00.0: reg 0x24: [io 0x1000-0x107f]
[ 0.459760] pci 0000:02:00.0: reg 0x30: [mem 0xd3000000-0xd301ffff pref]
[ 0.459963] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.459967] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.459970] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.459974] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.460416] ACPI: PCI Interrupt Link [LNK1] (IRQs *16 17 18 19 20 21 22 23)
[ 0.460533] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.460649] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.460763] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 *19 20 21 22 23)
[ 0.460878] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.460993] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.461108] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.461222] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 *21 22 23)
[ 0.461337] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.461451] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.461564] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.461677] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 *17 18 19 20 21 22 23)
[ 0.461790] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 *20 21 22 23)
[ 0.461904] ACPI: PCI Interrupt Link [LGPU] (IRQs *16 17 18 19 20 21 22 23)
[ 0.462015] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.462129] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.462242] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 *18 19 20 21 22 23)
[ 0.462355] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 *22 23)
[ 0.462466] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.462668] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.462681] ACPI: Enabled 2 GPEs in block 20 to 5F
[ 0.462731] ACPI : EC: event unblocked
[ 0.462739] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.462741] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.462854] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.462854] vgaarb: loaded
[ 0.462854] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.462854] vgaarb: bridge control possible 0000:02:00.0
[ 0.462854] Registered efivars operations
[ 0.655966] PCI: Using ACPI for IRQ routing
[ 0.655966] PCI: pci_cache_line_size set to 64 bytes
[ 0.655966] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.655966] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.655966] e820: reserve RAM buffer [mem 0xbf719000-0xbfffffff]
[ 0.655966] e820: reserve RAM buffer [mem 0xbf954000-0xbfffffff]
[ 0.655966] e820: reserve RAM buffer [mem 0xbf96e000-0xbfffffff]
[ 0.655966] e820: reserve RAM buffer [mem 0xbf9b0000-0xbfffffff]
[ 0.655966] e820: reserve RAM buffer [mem 0xbfef9000-0xbfffffff]
[ 0.656056] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.656063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.656067] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.658092] clocksource: Switched to clocksource hpet
[ 0.665956] VFS: Disk quotas dquot_6.6.0
[ 0.665991] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.666111] pnp: PnP ACPI init
[ 0.666280] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.666285] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.666453] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.666456] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.666657] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.666659] system 00:02: [io 0x0480-0x04ff] has been reserved
[ 0.666661] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.666663] system 00:02: [io 0x0580-0x05ff] has been reserved
[ 0.666665] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.666667] system 00:02: [io 0x0880-0x08ff] has been reserved
[ 0.666669] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.666671] system 00:02: [io 0x0295-0x0296] has been reserved
[ 0.666675] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.666713] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.667139] pnp: PnP ACPI: found 4 devices
[ 0.674463] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.674501] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.674513] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.674534] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.674536] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.674539] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.674542] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.674546] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.674548] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.674550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.674552] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.674553] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.674555] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.674557] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.674559] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.674560] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.674562] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.674564] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.674565] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.674567] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.674569] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.674570] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.674572] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.674574] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff window]
[ 0.674576] pci_bus 0000:01: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.674578] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.674580] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.674581] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.674696] NET: Registered protocol family 2
[ 0.674915] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.675056] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.675288] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.675342] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.675376] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.675460] NET: Registered protocol family 1
[ 0.675834] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 0.732393] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 0.732780] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 20
[ 0.792384] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 19
[ 0.792603] PCI: CLS 256 bytes, default 64
[ 0.792658] Unpacking initramfs...
[ 1.206170] Freeing initrd memory: 18896K (ffff9694f5b08000 - ffff9694f6d7c000)
[ 1.206176] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.206179] software IO TLB [mem 0xa8382000-0xac382000] (64MB) mapped at [ffff969568382000-ffff96956c381fff]
[ 1.206747] audit: initializing netlink subsys (disabled)
[ 1.206779] audit: type=2000 audit(1489429646.204:1): initialized
[ 1.207170] Initialise system trusted keyrings
[ 1.207309] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.207341] zbud: loaded
[ 1.270800] Key type asymmetric registered
[ 1.270802] Asymmetric key parser 'x509' registered
[ 1.270825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.270860] io scheduler noop registered
[ 1.270861] io scheduler deadline registered
[ 1.270882] io scheduler cfq registered (default)
[ 1.271311] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 22
[ 1.271495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.271502] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.271520] efifb: probing for efifb
[ 1.271549] efifb: framebuffer at 0xc0010000, using 7232k, total 7232k
[ 1.271550] efifb: mode is 1440x900x32, linelength=8192, pages=1
[ 1.271551] efifb: scrolling: redraw
[ 1.271552] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.276673] Console: switching to colour frame buffer device 180x56
[ 1.281607] fb0: EFI VGA frame buffer device
[ 1.281617] intel_idle: does not run on family 6 model 23
[ 1.281716] Monitor-Mwait will be used to enter C-1 state
[ 1.281726] Monitor-Mwait will be used to enter C-2 state
[ 1.281735] Monitor-Mwait will be used to enter C-3 state
[ 1.281741] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.282134] GHES: HEST is not enabled!
[ 1.282199] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.282687] Linux agpgart interface v0.103
[ 1.282761] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.282762] AMD IOMMUv2 functionality not available on this system
[ 1.282979] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.120029] random: fast init done
[ 2.208036] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e9c4c57093, max_idle_ns: 440795284583 ns
[ 2.309447] i8042: No controller found
[ 2.309613] mousedev: PS/2 mouse device common for all mice
[ 2.309658] rtc_cmos 00:03: RTC can wake from S4
[ 2.309944] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.309996] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.310029] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.310487] NET: Registered protocol family 10
[ 2.310741] mip6: Mobile IPv6
[ 2.310743] NET: Registered protocol family 17
[ 2.310746] mpls_gso: MPLS GSO support
[ 2.310962] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[ 2.311065] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.311262] registered taskstats version 1
[ 2.311265] Loading compiled-in X.509 certificates
[ 2.313151] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 2.313520] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 2.313537] zswap: loaded using pool lzo/zbud
[ 2.314392] rtc_cmos 00:03: setting system clock to 2017-03-13 18:27:28 UTC (1489429648)
[ 2.314471] PM: Hibernation image not present or could not be loaded.
[ 2.316222] Freeing unused kernel memory: 1392K (ffffffff8b71c000 - ffffffff8b878000)
[ 2.316223] Write protecting the kernel read-only data: 12288k
[ 2.317349] Freeing unused kernel memory: 2032K (ffff969534404000 - ffff969534600000)
[ 2.321126] Freeing unused kernel memory: 1252K (ffff9695348c7000 - ffff969534a00000)
[ 2.327994] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.486162] ACPI: bus type USB registered
[ 2.486200] usbcore: registered new interface driver usbfs
[ 2.486215] usbcore: registered new interface driver hub
[ 2.486246] usbcore: registered new device driver usb
[ 2.488350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.489856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.490546] ehci-pci: EHCI PCI platform driver
[ 2.490759] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 2.490766] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 2.490777] ehci-pci 0000:00:04.1: debug port 1
[ 2.490804] ehci-pci 0000:00:04.1: disable ppcd for nvidia mcp89
[ 2.490809] ehci-pci 0000:00:04.1: cache line size of 256 is not supported
[ 2.490827] ehci-pci 0000:00:04.1: irq 23, io mem 0xd328b100
[ 2.495315] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.504080] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 2.504146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.504148] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.504150] usb usb1: Product: EHCI Host Controller
[ 2.504151] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 2.504153] usb usb1: SerialNumber: 0000:00:04.1
[ 2.504316] hub 1-0:1.0: USB hub found
[ 2.504323] hub 1-0:1.0: 6 ports detected
[ 2.504852] ehci-pci 0000:00:06.1: EHCI Host Controller
[ 2.504859] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 2.504868] ehci-pci 0000:00:06.1: debug port 1
[ 2.504891] ehci-pci 0000:00:06.1: disable ppcd for nvidia mcp89
[ 2.504896] ehci-pci 0000:00:06.1: cache line size of 256 is not supported
[ 2.504909] ehci-pci 0000:00:06.1: irq 19, io mem 0xd328b000
[ 2.508493] SCSI subsystem initialized
[ 2.515999] libata version 3.00 loaded.
[ 2.520024] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 2.520089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.520091] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.520093] usb usb2: Product: EHCI Host Controller
[ 2.520094] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 2.520096] usb usb2: SerialNumber: 0000:00:06.1
[ 2.520287] hub 2-0:1.0: USB hub found
[ 2.520296] hub 2-0:1.0: 6 ports detected
[ 2.521393] ohci-pci: OHCI PCI platform driver
[ 2.521534] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 2.521541] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 2.521564] ohci-pci 0000:00:04.0: irq 23, io mem 0xd328a000
[ 2.582082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.582084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.582086] usb usb3: Product: OHCI PCI host controller
[ 2.582087] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 ohci_hcd
[ 2.582089] usb usb3: SerialNumber: 0000:00:04.0
[ 2.582273] hub 3-0:1.0: USB hub found
[ 2.582282] hub 3-0:1.0: 6 ports detected
[ 2.582749] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 2.582754] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 2.582780] ohci-pci 0000:00:06.0: irq 20, io mem 0xd3289000
[ 2.642142] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.642144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.642145] usb usb4: Product: OHCI PCI host controller
[ 2.642147] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 ohci_hcd
[ 2.642148] usb usb4: SerialNumber: 0000:00:06.0
[ 2.642306] hub 4-0:1.0: USB hub found
[ 2.642314] hub 4-0:1.0: 6 ports detected
[ 2.642730] ahci 0000:00:0a.0: version 3.0
[ 2.643004] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[ 2.643078] ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 2.643081] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
[ 2.643345] scsi host0: ahci
[ 2.643426] ata1: SATA max UDMA/133 abar m8192@0xd3284000 port 0xd3284100 irq 24
[ 2.848108] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.959440] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.959671] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.959710] ata1.00: ATA-8: APPLE SSD TS256C, CJAA0201, max UDMA/100
[ 2.959713] ata1.00: 490234752 sectors, multi 16: LBA48
[ 2.959936] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.959975] ata1.00: configured for UDMA/100
[ 2.960226] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS256C 0201 PQ: 0 ANSI: 5
[ 2.994745] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/234 GiB)
[ 2.994823] sd 0:0:0:0: [sda] Write Protect is off
[ 2.994825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.994850] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.997064] sda: sda1 sda2 sda3 sda4 sda5
[ 2.997608] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.000778] usb 2-1: New USB device found, idVendor=05ac, idProduct=8403
[ 3.000781] usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 3.000783] usb 2-1: Product: Card Reader
[ 3.000785] usb 2-1: Manufacturer: Apple
[ 3.000787] usb 2-1: SerialNumber: 000000009833
[ 3.004624] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.004812] scsi host1: usb-storage 2-1:1.0
[ 3.004895] usbcore: registered new interface driver usb-storage
[ 3.005859] usbcore: registered new interface driver uas
[ 3.070770] PM: Starting manual resume from disk
[ 3.070774] PM: Hibernation image partition 8:4 present
[ 3.070775] PM: Looking for hibernation image.
[ 3.071057] PM: Image not found (code -22)
[ 3.071058] PM: Hibernation image not present or could not be loaded.
[ 3.100108] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 3.227681] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.335091] usb 3-3: New USB device found, idVendor=05ac, idProduct=0240
[ 3.335093] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.335095] usb 3-3: Product: Apple Internal Keyboard / Trackpad
[ 3.335097] usb 3-3: Manufacturer: Apple Inc.
[ 3.376045] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 3.403003] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.539315] usb 1-6: New USB device found, idVendor=05ac, idProduct=850a
[ 3.539318] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.539319] usb 1-6: Product: Built-in iSight
[ 3.539321] usb 1-6: Manufacturer: Apple Inc.
[ 3.539322] usb 1-6: SerialNumber: CCGB5A02YPDF9KF0
[ 3.672089] usb 3-5: new full-speed USB device number 3 using ohci-pci
[ 3.806736] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.806869] systemd[1]: Detected architecture x86-64.
[ 3.807115] systemd[1]: Set hostname to <mac-debian>.
[ 3.921099] usb 3-5: New USB device found, idVendor=0a5c, idProduct=4500
[ 3.921102] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.921105] usb 3-5: Product: BRCM2070 Hub
[ 3.921107] usb 3-5: Manufacturer: Apple Inc.
[ 3.924138] hub 3-5:1.0: USB hub found
[ 3.927070] hub 3-5:1.0: 3 ports detected
[ 3.934996] systemd[1]: Configuration file /etc/systemd/system/postfix.service.d/override.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.947076] systemd[1]: lvm2-lvmetad.socket: Cannot add dependency job, ignoring: Unit lvm2-lvmetad.socket is masked.
[ 3.947089] systemd[1]: lvm2-lvmpolld.socket: Cannot add dependency job, ignoring: Unit lvm2-lvmpolld.socket is masked.
[ 3.947102] systemd[1]: lvm2-monitor.service: Cannot add dependency job, ignoring: Unit lvm2-monitor.service is masked.
[ 3.947144] systemd[1]: dm-event.socket: Cannot add dependency job, ignoring: Unit dm-event.socket is masked.
[ 3.947178] systemd[1]: lxcfs.service: Cannot add dependency job, ignoring: Unit lxcfs.service is masked.
[ 3.947191] systemd[1]: cgproxy.service: Cannot add dependency job, ignoring: Unit cgproxy.service is masked.
[ 3.978894] lp: driver loaded but no devices found
[ 3.987375] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 3.996237] ppdev: user-space parallel port driver
[ 4.017463] RPC: Registered named UNIX socket transport module.
[ 4.017464] RPC: Registered udp transport module.
[ 4.017465] RPC: Registered tcp transport module.
[ 4.017466] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.036079] scsi 1:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
[ 4.047939] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 4.117285] systemd-journald[182]: Received request to flush runtime journal from PID 1
[ 4.223269] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.223330] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.237236] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 4.237258] ACPI: Lid Switch [LID0]
[ 4.237419] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.237427] ACPI: Power Button [PWRB]
[ 4.237489] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 4.237491] ACPI: Sleep Button [SLPB]
[ 4.237640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.237642] ACPI: Power Button [PWRF]
[ 4.244380] ACPI: AC Adapter [ADP1] (off-line)
[ 4.252020] usb 3-5.1: new full-speed USB device number 4 using ohci-pci
[ 4.256402] ACPI: SBS HC: EC = 0xffff9695fa98d800, offset = 0x20, query_bit = 0x10
[ 4.302681] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 4.302711] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 4.304463] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input4
[ 4.326251] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.360314] EFI Variables Facility v0.08 2004-May-17
[ 4.373207] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.391369] usb 3-5.1: New USB device found, idVendor=05ac, idProduct=820a
[ 4.391372] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.401513] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input6
[ 4.402383] usbcore: registered new interface driver bcm5974
[ 4.405730] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.416943] media: Linux media interface: v0.10
[ 4.428480] usbcore: registered new interface driver usbhid
[ 4.428482] usbhid: USB HID core driver
[ 4.435392] [drm] Initialized
[ 4.445635] snd_hda_intel 0000:00:08.0: enabling device (0000 -> 0002)
[ 4.445943] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 4.445952] snd_hda_intel 0000:00:08.0: Disabling MSI
[ 4.445954] snd_hda_intel 0000:00:08.0: position_fix set to 1 for device 10de:cb89
[ 4.452350] Linux video capture interface: v2.00
[ 4.484392] usb 3-5.2: new full-speed USB device number 5 using ohci-pci
[ 4.495030] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[ 4.529662] wmi: Mapper loaded
[ 4.545251] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
[ 4.557472] Adding 2929660k swap on /dev/sda4. Priority:-1 extents:1 across:2929660k SSFS
[ 4.559899] uvcvideo 1-6:1.0: Entity type for entity Processing 3 was not initialized!
[ 4.559903] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.560020] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input7
[ 4.560058] usbcore: registered new interface driver uvcvideo
[ 4.560059] USB Video Class driver (1.1.1)
[ 4.709916] usb 3-5.2: New USB device found, idVendor=05ac, idProduct=820b
[ 4.709919] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.804040] usb 3-5.3: new full-speed USB device number 6 using ohci-pci
[ 4.949079] usb 3-5.3: New USB device found, idVendor=05ac, idProduct=821b
[ 4.949082] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.949084] usb 3-5.3: Product: Bluetooth USB Host Controller
[ 4.949085] usb 3-5.3: Manufacturer: Apple Inc.
[ 5.171643] pstore: using zlib compression
[ 5.171657] pstore: Registered efi as persistent store backend
[ 5.392401] applesmc: key=323 fan=1 temp=27 index=26 acc=0 lux=0 kbd=0
[ 5.678350] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/0003:05AC:0240.0001/input/input8
[ 5.736400] apple 0003:05AC:0240.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
[ 5.739544] apple 0003:05AC:0240.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
[ 5.808339] intel_powerclamp: No package C-state available
[ 5.849654] intel_powerclamp: No package C-state available
[ 5.889325] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/0003:05AC:820A.0003/input/input9
[ 5.919998] ACPI Warning: \_SB.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[ 5.920155] ACPI: \_SB_.PCI0.IXVE.IGPU: failed to evaluate _DSM
[ 5.920202] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
[ 5.920410] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[ 5.924175] checking generic (c0010000 710000) vs hw (c0000000 10000000)
[ 5.924177] fb: switching to nouveaufb from EFI VGA
[ 5.924233] Console: switching to colour dummy device 80x25
[ 5.924458] nouveau 0000:02:00.0: NVIDIA MCP89 (0af180a2)
[ 5.940034] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4206: line_outs=2 (0xb/0xa/0x0/0x0/0x0) type:speaker
[ 5.940037] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.940039] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[ 5.940041] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
[ 5.940042] snd_hda_codec_cirrus hdaudioC0D0: dig-out=0x10/0x0
[ 5.940044] snd_hda_codec_cirrus hdaudioC0D0: inputs:
[ 5.940046] snd_hda_codec_cirrus hdaudioC0D0: Mic=0xd
[ 5.944296] nouveau 0000:02:00.0: bios: version 70.89.13.00.00
[ 5.965196] nouveau 0000:02:00.0: fb: 256 MiB stolen system memory
[ 6.048248] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[ 6.131295] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[ 6.139586] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 6.139898] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/0003:05AC:820B.0004/input/input10
[ 6.196513] hid-generic 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 6.571852] wl: loading out-of-tree module taints kernel.
[ 6.571856] wl: module license 'MIXED/Proprietary' taints kernel.
[ 6.571857] Disabling lock debugging due to kernel taint
[ 6.579297] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 6.594700] Bluetooth: Core ver 2.22
[ 6.594830] NET: Registered protocol family 31
[ 6.594831] Bluetooth: HCI device and connection manager initialized
[ 6.594836] Bluetooth: HCI socket layer initialized
[ 6.594839] Bluetooth: L2CAP socket layer initialized
[ 6.594847] Bluetooth: SCO socket layer initialized
[ 6.640381] wlan0: Broadcom BCM4353 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 6.925174] usbcore: registered new interface driver btusb
[ 6.964049] Bluetooth: hci0: BCM: chip id 19 build 0848
[ 6.967085] Bluetooth: hci0: BCM: product 05ac:821b
[ 6.969079] usb 3-5.1: USB disconnect, device number 4
[ 7.000056] Bluetooth: hci0: ChromeLinux_6F81
[ 7.332044] usb 3-5.2: USB disconnect, device number 5
[ 7.366437] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.366439] Bluetooth: BNEP filters: protocol multicast
[ 7.366444] Bluetooth: BNEP socket layer initialized
[ 7.500460] input: Mouseemu virtual keyboard as /devices/virtual/input/input14
[ 7.502782] input: Mouseemu virtual mouse as /devices/virtual/input/input15
[ 7.556958] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[ 7.557089] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[ 7.557209] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.0/sound/card0/input13
[ 7.557330] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
[ 7.627629] [TTM] Zone kernel: Available graphics memory: 1893656 kiB
[ 7.627632] [TTM] Initializing pool allocator
[ 7.627641] [TTM] Initializing DMA pool allocator
[ 7.627674] nouveau 0000:02:00.0: DRM: VRAM: 256 MiB
[ 7.627676] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[ 7.627682] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[ 7.627685] nouveau 0000:02:00.0: DRM: DCB version 4.0
[ 7.627688] nouveau 0000:02:00.0: DRM: DCB outp 00: 040001b6 0f220010
[ 7.627691] nouveau 0000:02:00.0: DRM: DCB outp 01: 020112a6 0f220010
[ 7.627694] nouveau 0000:02:00.0: DRM: DCB outp 02: 02011262 00020010
[ 7.627696] nouveau 0000:02:00.0: DRM: DCB conn 00: 00002047
[ 7.627698] nouveau 0000:02:00.0: DRM: DCB conn 01: 00101146
[ 7.652219] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.652221] [drm] Driver supports precise vblank timestamp query.
[ 7.667678] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.708638] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[ 7.822592] nouveau 0000:02:00.0: DRM: allocated 1440x900 fb: 0x50000, bo ffff9695f7072c00
[ 7.822802] fbcon: nouveaufb (fb0) is primary device
[ 7.980969] Console: switching to colour frame buffer device 180x56
[ 7.984415] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 8.000047] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[ 8.437742] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 8.441599] Bridge firewalling registered
[ 8.549230] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 9.214272] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 9.647498] systemd[1]: apt-daily.timer: Adding 6h 29min 21.479701s random time.
[ 22.235559] fuse init (API version 7.26)
[ 25.364857] Bluetooth: RFCOMM TTY layer initialized
[ 25.364865] Bluetooth: RFCOMM socket layer initialized
[ 25.364872] Bluetooth: RFCOMM ver 1.11
[ 30.086087] random: crng init done
[ 42.600116] ERROR @wl_notify_scan_status :
[ 42.600122] wlan0 Scan_results error (-22)
[ 44.547321] systemd[1]: apt-daily.timer: Adding 3h 47min 6.563966s random time.
[ 44.993181] systemd[1]: apt-daily.timer: Adding 9h 6min 44.397251s random time.
[ 166.261683] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 215.415476] perf: interrupt took too long (3139 > 3133), lowering kernel.perf_event_max_sample_rate to 63500
[ 317.450705] perf: interrupt took too long (3931 > 3923), lowering kernel.perf_event_max_sample_rate to 50750
[ 454.792411] perf: interrupt took too long (4933 > 4913), lowering kernel.perf_event_max_sample_rate to 40500
[ 743.569729] perf: interrupt took too long (6184 > 6166), lowering kernel.perf_event_max_sample_rate to 32250
[ 1740.745183] nouveau 0000:02:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[ 1850.756085] nouveau 0000:02:00.0: therm: temperature (95 C) hit the 'downclock' threshold
[ 1875.754839] nouveau 0000:02:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[ 1939.753817] nouveau 0000:02:00.0: therm: temperature (87 C) went below the 'fanboost' threshold
[ 2074.750109] nouveau 0000:02:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[ 2159.791417] systemd[1]: apt-daily.timer: Adding 3h 38min 11.870834s random time.
[ 2165.562431] systemd[1]: apt-daily.timer: Adding 9h 6min 16.245286s random time.
[ 2165.787280] systemd[1]: apt-daily.timer: Adding 6h 10min 37.597862s random time.
[ 2166.022105] systemd[1]: apt-daily.timer: Adding 3h 41min 50.143850s random time.
[ 2166.152841] systemd: 51 output lines suppressed due to ratelimiting
[ 2167.760210] nouveau 0000:02:00.0: therm: temperature (95 C) hit the 'downclock' threshold
[ 2268.841179] nouveau 0000:02:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[ 2644.896270] nouveau 0000:02:00.0: therm: temperature (95 C) hit the 'downclock' threshold
[ 7759.255060] CE: hpet increased min_delta_ns to 11521 nsec
[ 8141.333801] nouveau 0000:02:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[ 8329.339134] nouveau 0000:02:00.0: therm: temperature (95 C) hit the 'downclock' threshold
[ 8366.340983] nouveau 0000:02:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[ 8510.352032] nouveau 0000:02:00.0: therm: temperature (87 C) went below the 'fanboost' threshold
[ 8608.356582] nouveau 0000:02:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[ 8678.355995] nouveau 0000:02:00.0: therm: temperature (95 C) hit the 'downclock' threshold
[ 9019.373651] nouveau 0000:02:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[ 9091.373986] nouveau 0000:02:00.0: therm: temperature (87 C) went below the 'fanboost' threshold
[ 9138.713565] ERROR @wl_notify_scan_status :
[ 9138.713571] wlan0 Scan_results error (-22)
[ 9361.387555] nouveau 0000:02:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[ 9382.387584] nouveau 0000:02:00.0: therm: temperature (87 C) went below the 'fanboost' threshold
[10663.176119] PM: Syncing filesystems ... done.
[10663.219708] PM: Preparing system for sleep (mem)
[10663.219874] Freezing user space processes ... (elapsed 0.001 seconds) done.
[10663.221462] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10663.222575] PM: Suspending system (mem)
[10663.222751] Suspending console(s) (use no_console_suspend to debug)
[10663.223436] ACPI : EC: event blocked
[10663.224044] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10663.224751] nouveau 0000:02:00.0: DRM: suspending console...
[10663.224755] nouveau 0000:02:00.0: DRM: suspending display...
[10663.224778] nouveau 0000:02:00.0: DRM: evicting buffers...
[10663.226969] sd 0:0:0:0: [sda] Stopping disk
[10663.570121] nouveau 0000:02:00.0: DRM: waiting for kernel channels to go idle...
[10663.570153] nouveau 0000:02:00.0: DRM: suspending client object trees...
[10663.570772] nouveau 0000:02:00.0: DRM: suspending kernel object tree...
[10666.192396] PM: suspend of devices complete after 2969.422 msecs
[10666.192997] PM: late suspend of devices complete after 0.597 msecs
[10666.193174] ACPI : EC: interrupt blocked
[10666.193618] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI
[10666.193652] ohci-pci 0000:00:06.0: System wakeup enabled by ACPI
[10666.193672] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI
[10666.193689] ohci-pci 0000:00:04.0: System wakeup enabled by ACPI
[10666.212353] PM: noirq suspend of devices complete after 19.353 msecs
[10666.213281] ACPI: Preparing to enter system sleep state S3
[10666.216222] ACPI : EC: EC stopped
[10666.216223] PM: Saving platform NVS memory
[10666.218261] Disabling non-boot CPUs ...
[10666.218578] Broke affinity for irq 9
[10666.218582] Broke affinity for irq 19
[10666.218588] Broke affinity for irq 20
[10666.218593] Broke affinity for irq 22
[10666.218599] Broke affinity for irq 23
[10666.218601] Broke affinity for irq 24
[10666.219617] smpboot: CPU 1 is now offline
[10666.220812] ACPI: Low-level resume complete
[10666.220812] ACPI : EC: EC started
[10666.220812] PM: Restoring platform NVS memory
[10666.220812] Suspended for 28489.738 seconds
[10666.227540] Enabling non-boot CPUs ...
[10666.228392] x86: Booting SMP configuration:
[10666.228393] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10666.235923] cache: parent cpu1 should not be sleeping
[10666.236555] CPU1 is up
[10666.240648] ACPI: Waking up from system sleep state S3
[10666.244359] ACPI : EC: interrupt unblocked
[10666.264070] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI
[10666.264074] ohci-pci 0000:00:04.0: System wakeup disabled by ACPI
[10666.264142] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI
[10666.264349] ohci-pci 0000:00:06.0: System wakeup disabled by ACPI
[10666.264405] PM: noirq resume of devices complete after 20.183 msecs
[10666.264600] PM: early resume of devices complete after 0.174 msecs
[10666.264738] ACPI : EC: event unblocked
[10666.264787] rtc_cmos 00:03: System wakeup disabled by ACPI
[10666.265069] nouveau 0000:02:00.0: DRM: resuming kernel object tree...
[10666.296801] sd 0:0:0:0: [sda] Starting disk
[10666.475537] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[10666.558650] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[10666.585564] nouveau 0000:02:00.0: DRM: resuming client object trees...
[10666.586024] nouveau 0000:02:00.0: DRM: resuming display...
[10666.670737] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10666.670952] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10666.671182] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[10666.671214] ata1.00: configured for UDMA/100
[10666.821462] nouveau 0000:02:00.0: DRM: resuming console...
[10666.821516] PM: resume of devices complete after 556.913 msecs
[10666.821848] PM: Finishing wakeup.
[10666.821849] Restarting tasks ... done.
[10667.126682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[10667.231760] ERROR @wl_cfg80211_scan :
[10667.231766] WLC_SCAN error (-22)
[10668.243095] ERROR @wl_cfg80211_scan :
[10668.243101] WLC_SCAN error (-22)
[15679.385791] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 139
[15679.385796] Raw EDID:
[15679.385799] 00 ff ff ff ff ff ff 00 06 10 df 9c 00 00 00 00
[15679.385802] 23 14 01 03 80 1d 12 78 0a ef 05 97 57 54 92 27
[15679.385803] 23 14 01 03 80 1d 12 78 0a ef 05 97 57 54 92 27
[15679.385805] 01 01 01 01 01 01 c2 23 a0 d4 50 84 1a 30 40 2a
[15679.385807] 36 00 1e b3 10 00 00 18 00 00 00 01 00 06 10 30
[15679.385809] 00 00 00 00 00 00 00 00 0a 20 00 00 00 fe 00 4c
[15679.385811] 50 31 33 33 57 50 31 2d 54 50 41 31 00 00 00 fc
[15679.385813] 00 43 6f 6c 6f 72 20 4c 43 44 0a 20 20 20 00 1f
[15679.526270] PM: Syncing filesystems ... done.
[15679.540454] PM: Preparing system for sleep (mem)
[15679.540648] Freezing user space processes ... (elapsed 0.001 seconds) done.
[15679.542373] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15679.543502] PM: Suspending system (mem)
[15679.543706] Suspending console(s) (use no_console_suspend to debug)
[15679.544499] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15679.544502] ACPI : EC: event blocked
[15679.545160] nouveau 0000:02:00.0: DRM: suspending console...
[15679.545165] nouveau 0000:02:00.0: DRM: suspending display...
[15679.545186] nouveau 0000:02:00.0: DRM: evicting buffers...
[15679.560033] sd 0:0:0:0: [sda] Stopping disk
[15679.695407] nouveau 0000:02:00.0: DRM: waiting for kernel channels to go idle...
[15679.695448] nouveau 0000:02:00.0: DRM: suspending client object trees...
[15679.696035] nouveau 0000:02:00.0: DRM: suspending kernel object tree...
[15682.376396] PM: suspend of devices complete after 2832.421 msecs
[15682.376966] PM: late suspend of devices complete after 0.565 msecs
[15682.377244] ACPI : EC: interrupt blocked
[15682.377465] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI
[15682.378194] ohci-pci 0000:00:06.0: System wakeup enabled by ACPI
[15682.378236] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI
[15682.378251] ohci-pci 0000:00:04.0: System wakeup enabled by ACPI
[15682.396244] PM: noirq suspend of devices complete after 19.273 msecs
[15682.397432] ACPI: Preparing to enter system sleep state S3
[15682.399584] ACPI : EC: EC stopped
[15682.399585] PM: Saving platform NVS memory
[15682.402039] Disabling non-boot CPUs ...
[15682.402369] Broke affinity for irq 9
[15682.402374] Broke affinity for irq 19
[15682.402379] Broke affinity for irq 20
[15682.402385] Broke affinity for irq 22
[15682.402391] Broke affinity for irq 23
[15682.402394] Broke affinity for irq 24
[15682.403410] smpboot: CPU 1 is now offline
[15682.404917] ACPI: Low-level resume complete
[15682.404917] ACPI : EC: EC started
[15682.404917] PM: Restoring platform NVS memory
[15682.404917] Suspended for 16877.209 seconds
[15682.411659] Enabling non-boot CPUs ...
[15682.412558] x86: Booting SMP configuration:
[15682.412559] smpboot: Booting Node 0 Processor 1 APIC 0x1
[15682.420092] cache: parent cpu1 should not be sleeping
[15682.420682] CPU1 is up
[15682.424815] ACPI: Waking up from system sleep state S3
[15682.428573] ACPI : EC: interrupt unblocked
[15682.448131] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI
[15682.448221] ohci-pci 0000:00:06.0: System wakeup disabled by ACPI
[15682.448321] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI
[15682.448344] ohci-pci 0000:00:04.0: System wakeup disabled by ACPI
[15682.448414] PM: noirq resume of devices complete after 19.975 msecs
[15682.448609] PM: early resume of devices complete after 0.175 msecs
[15682.448714] ACPI : EC: event unblocked
[15682.448763] rtc_cmos 00:03: System wakeup disabled by ACPI
[15682.452027] nouveau 0000:02:00.0: DRM: resuming kernel object tree...
[15682.481387] sd 0:0:0:0: [sda] Starting disk
[15682.662879] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[15682.746002] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[15682.772932] nouveau 0000:02:00.0: DRM: resuming client object trees...
[15682.773393] nouveau 0000:02:00.0: DRM: resuming display...
[15682.858765] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15682.859003] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15682.859243] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[15682.859275] ata1.00: configured for UDMA/100
[15683.008856] nouveau 0000:02:00.0: DRM: resuming console...
[15683.008913] PM: resume of devices complete after 560.300 msecs
[15683.009339] PM: Finishing wakeup.
[15683.009340] Restarting tasks ... done.
[15683.336973] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15807.636115] ERROR @wl_notify_scan_status :
[15807.636121] wlan0 Scan_results error (-22)
[20577.141745] PM: Syncing filesystems ... done.
[20577.152295] PM: Preparing system for sleep (mem)
[20577.152492] Freezing user space processes ... (elapsed 0.001 seconds) done.
[20577.154339] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[20577.155640] PM: Suspending system (mem)
[20577.155844] Suspending console(s) (use no_console_suspend to debug)
[20577.156681] ACPI : EC: event blocked
[20577.157074] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[20577.157558] nouveau 0000:02:00.0: DRM: suspending console...
[20577.157563] nouveau 0000:02:00.0: DRM: suspending display...
[20577.157588] nouveau 0000:02:00.0: DRM: evicting buffers...
[20577.159084] sd 0:0:0:0: [sda] Stopping disk
[20577.472307] nouveau 0000:02:00.0: DRM: waiting for kernel channels to go idle...
[20577.472341] nouveau 0000:02:00.0: DRM: suspending client object trees...
[20577.472923] nouveau 0000:02:00.0: DRM: suspending kernel object tree...
[20580.148401] PM: suspend of devices complete after 2992.189 msecs
[20580.148960] PM: late suspend of devices complete after 0.554 msecs
[20580.149235] ACPI : EC: interrupt blocked
[20580.149453] ehci-pci 0000:00:06.1: System wakeup enabled by ACPI
[20580.150235] ohci-pci 0000:00:06.0: System wakeup enabled by ACPI
[20580.150264] ehci-pci 0000:00:04.1: System wakeup enabled by ACPI
[20580.150279] ohci-pci 0000:00:04.0: System wakeup enabled by ACPI
[20580.168266] PM: noirq suspend of devices complete after 19.302 msecs
[20580.169435] ACPI: Preparing to enter system sleep state S3
[20580.171327] ACPI : EC: EC stopped
[20580.171327] PM: Saving platform NVS memory
[20580.173800] Disabling non-boot CPUs ...
[20580.174077] Broke affinity for irq 9
[20580.174082] Broke affinity for irq 19
[20580.174088] Broke affinity for irq 20
[20580.174093] Broke affinity for irq 22
[20580.174099] Broke affinity for irq 23
[20580.174102] Broke affinity for irq 24
[20580.175130] smpboot: CPU 1 is now offline
[20580.176016] ACPI: Low-level resume complete
[20580.176016] ACPI : EC: EC started
[20580.176016] PM: Restoring platform NVS memory
[20580.176016] Suspended for 21344.591 seconds
[20580.183389] Enabling non-boot CPUs ...
[20580.184382] x86: Booting SMP configuration:
[20580.184383] smpboot: Booting Node 0 Processor 1 APIC 0x1
[20580.191874] cache: parent cpu1 should not be sleeping
[20580.192466] CPU1 is up
[20580.196589] ACPI: Waking up from system sleep state S3
[20580.202038] ACPI : EC: interrupt unblocked
[20580.220167] ohci-pci 0000:00:06.0: System wakeup disabled by ACPI
[20580.220170] ehci-pci 0000:00:04.1: System wakeup disabled by ACPI
[20580.220277] ehci-pci 0000:00:06.1: System wakeup disabled by ACPI
[20580.220361] ohci-pci 0000:00:04.0: System wakeup disabled by ACPI
[20580.220465] PM: noirq resume of devices complete after 19.257 msecs
[20580.220693] PM: early resume of devices complete after 0.207 msecs
[20580.220818] ACPI : EC: event unblocked
[20580.220888] rtc_cmos 00:03: System wakeup disabled by ACPI
[20580.221103] nouveau 0000:02:00.0: DRM: resuming kernel object tree...
[20580.232668] sd 0:0:0:0: [sda] Starting disk
[20580.426707] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[20580.509764] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[20580.534706] nouveau 0000:02:00.0: DRM: resuming client object trees...
[20580.535181] nouveau 0000:02:00.0: DRM: resuming display...
[20580.615330] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[20580.615563] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[20580.615838] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[20580.615875] ata1.00: configured for UDMA/100
[20580.770635] nouveau 0000:02:00.0: DRM: resuming console...
[20580.770693] PM: resume of devices complete after 549.996 msecs
[20580.771107] PM: Finishing wakeup.
[20580.771108] Restarting tasks ... done.
[20581.034636] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Reply to: