--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-video-intel: after new installation the xserver crash and the sddm dont start
- From: Heiko Ernst <gipfelsturm111@gmx.net>
- Date: Sun, 05 Feb 2017 10:28:08 +0100
- Message-id: <148628688829.1825.8866371297378539886.reportbug@Laptop>
Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20161206-1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 540M] [10de:0df4] (rev a1)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.9.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20161229 (Debian 6.3.0-2) ) #1 SMP Debian 4.9.2-2 (2017-01-12)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 38681 Feb 5 10:22 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 22.686] (--) Log file renamed from "/var/log/Xorg.pid-583.log" to "/var/log/Xorg.0.log"
[ 22.707]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 22.708] X Protocol Version 11, Revision 0
[ 22.708] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 22.708] Current Operating System: Linux Laptop 4.9.0-1-amd64 #1 SMP Debian 4.9.2-2 (2017-01-12) x86_64
[ 22.708] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=1307351e-1623-40a9-9c4e-e6a1688184db ro quiet
[ 22.708] Build Date: 20 January 2017 02:50:48AM
[ 22.708] xorg-server 2:1.19.1-4 (https://www.debian.org/support)
[ 22.708] Current version of pixman: 0.34.0
[ 22.708] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.708] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.708] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 5 08:40:43 2017
[ 22.830] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.902] (==) No Layout section. Using the first Screen section.
[ 22.903] (==) No screen section available. Using defaults.
[ 22.903] (**) |-->Screen "Default Screen Section" (0)
[ 22.903] (**) | |-->Monitor "<default monitor>"
[ 22.916] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.917] (==) Automatically adding devices
[ 22.917] (==) Automatically enabling devices
[ 22.917] (==) Automatically adding GPU devices
[ 22.917] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 22.972] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 22.973] Entry deleted from font path.
[ 23.037] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 23.037] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.037] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.037] (II) Loader magic: 0x559eb96b6e00
[ 23.037] (II) Module ABI versions:
[ 23.037] X.Org ANSI C Emulation: 0.4
[ 23.037] X.Org Video Driver: 23.0
[ 23.037] X.Org XInput driver : 24.1
[ 23.037] X.Org Server Extension : 10.0
[ 23.039] (++) using VT number 7
[ 23.039] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 23.040] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.040] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 23.055] (--) PCI:*(0:0:2:0) 8086:0116:1043:15e2 rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[ 23.055] (--) PCI: (0:1:0:0) 10de:0df4:1043:15e2 rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 23.055] (II) LoadModule: "glx"
[ 23.068] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.215] (II) Module glx: vendor="X.Org Foundation"
[ 23.215] compiled for 1.19.1, module version = 1.0.0
[ 23.215] ABI class: X.Org Server Extension, version 10.0
[ 23.216] (==) Matched nouveau as autoconfigured driver 0
[ 23.216] (==) Matched nv as autoconfigured driver 1
[ 23.216] (==) Matched modesetting as autoconfigured driver 2
[ 23.216] (==) Matched fbdev as autoconfigured driver 3
[ 23.216] (==) Matched vesa as autoconfigured driver 4
[ 23.216] (==) Assigned the driver to the xf86ConfigLayout
[ 23.216] (II) LoadModule: "nouveau"
[ 23.216] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 23.270] (II) Module nouveau: vendor="X.Org Foundation"
[ 23.270] compiled for 1.19.0, module version = 1.0.13
[ 23.270] Module class: X.Org Video Driver
[ 23.270] ABI class: X.Org Video Driver, version 23.0
[ 23.270] (II) LoadModule: "nv"
[ 23.270] (WW) Warning, couldn't open module nv
[ 23.270] (II) UnloadModule: "nv"
[ 23.270] (II) Unloading nv
[ 23.271] (EE) Failed to load module "nv" (module does not exist, 0)
[ 23.271] (II) LoadModule: "modesetting"
[ 23.271] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23.284] (II) Module modesetting: vendor="X.Org Foundation"
[ 23.284] compiled for 1.19.1, module version = 1.19.1
[ 23.284] Module class: X.Org Video Driver
[ 23.284] ABI class: X.Org Video Driver, version 23.0
[ 23.284] (II) LoadModule: "fbdev"
[ 23.284] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.302] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.302] compiled for 1.19.0, module version = 0.4.4
[ 23.302] Module class: X.Org Video Driver
[ 23.302] ABI class: X.Org Video Driver, version 23.0
[ 23.302] (II) LoadModule: "vesa"
[ 23.303] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.318] (II) Module vesa: vendor="X.Org Foundation"
[ 23.318] compiled for 1.19.0, module version = 2.3.4
[ 23.318] Module class: X.Org Video Driver
[ 23.318] ABI class: X.Org Video Driver, version 23.0
[ 23.318] (II) NOUVEAU driver Date: Tue Sep 20 00:31:06 2016 -0400
[ 23.318] (II) NOUVEAU driver for NVIDIA chipset families :
[ 23.318] RIVA TNT (NV04)
[ 23.318] RIVA TNT2 (NV05)
[ 23.318] GeForce 256 (NV10)
[ 23.318] GeForce 2 (NV11, NV15)
[ 23.318] GeForce 4MX (NV17, NV18)
[ 23.318] GeForce 3 (NV20)
[ 23.318] GeForce 4Ti (NV25, NV28)
[ 23.318] GeForce FX (NV3x)
[ 23.318] GeForce 6 (NV4x)
[ 23.318] GeForce 7 (G7x)
[ 23.318] GeForce 8 (G8x)
[ 23.319] GeForce GTX 200 (NVA0)
[ 23.319] GeForce GTX 400 (NVC0)
[ 23.319] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 23.319] (II) FBDEV: driver for framebuffer: fbdev
[ 23.319] (II) VESA: driver for VESA chipsets: vesa
[ 23.340] (II) [drm] nouveau interface version: 1.3.1
[ 23.352] (II) modeset(0): using drv /dev/dri/card1
[ 23.352] (WW) Falling back to old probe method for fbdev
[ 23.352] (II) Loading sub module "fbdevhw"
[ 23.352] (II) LoadModule: "fbdevhw"
[ 23.352] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.353] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.353] compiled for 1.19.1, module version = 0.0.2
[ 23.353] ABI class: X.Org Video Driver, version 23.0
[ 23.353] (WW) Falling back to old probe method for vesa
[ 23.353] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.353] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 23.353] (==) modeset(0): RGB weight 888
[ 23.353] (==) modeset(0): Default visual is TrueColor
[ 23.353] (II) Loading sub module "glamoregl"
[ 23.353] (II) LoadModule: "glamoregl"
[ 23.354] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 23.531] (II) Module glamoregl: vendor="X.Org Foundation"
[ 23.531] compiled for 1.19.1, module version = 1.0.0
[ 23.531] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.531] (II) glamor: OpenGL accelerated X.org driver based.
[ 24.136] (II) glamor: EGL version 1.4 (DRI2):
[ 24.470] (II) modeset(0): glamor initialized
[ 24.471] (II) modeset(0): Output LVDS-1 has no monitor section
[ 24.472] (II) modeset(0): Output VGA-2 has no monitor section
[ 24.473] (II) modeset(0): Output HDMI-1 has no monitor section
[ 24.473] (II) modeset(0): Output DP-1 has no monitor section
[ 24.473] (II) modeset(0): EDID for output LVDS-1
[ 24.473] (II) modeset(0): Manufacturer: SEC Model: 544b Serial#: 0
[ 24.473] (II) modeset(0): Year: 2008 Week: 0
[ 24.474] (II) modeset(0): EDID Version: 1.3
[ 24.474] (II) modeset(0): Digital Display Input
[ 24.474] (II) modeset(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 24.474] (II) modeset(0): Gamma: 2.20
[ 24.474] (II) modeset(0): No DPMS capabilities specified
[ 24.474] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 24.474] (II) modeset(0): First detailed timing is preferred mode
[ 24.474] (II) modeset(0): redX: 0.600 redY: 0.340 greenX: 0.310 greenY: 0.560
[ 24.474] (II) modeset(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 24.474] (II) modeset(0): Manufacturer's mask: 0
[ 24.474] (II) modeset(0): Supported detailed timing:
[ 24.474] (II) modeset(0): clock: 107.8 MHz Image Size: 382 x 214 mm
[ 24.474] (II) modeset(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1892 h_border: 0
[ 24.474] (II) modeset(0): v_active: 900 v_sync: 902 v_sync_end 908 v_blanking: 950 v_border: 0
[ 24.474] (II) modeset(0): Unknown vendor-specific block f
[ 24.474] (II) modeset(0): SAMSUNG
[ 24.474] (II) modeset(0): LTN173KT01000
[ 24.474] (II) modeset(0): EDID (in hex):
[ 24.474] (II) modeset(0): 00ffffffffffff004ca34b5400000000
[ 24.474] (II) modeset(0): 00120103802615780a859599574f8f26
[ 24.474] (II) modeset(0): 21505400000001010101010101010101
[ 24.474] (II) modeset(0): 010101010101202a4024618432303020
[ 24.474] (II) modeset(0): 26007ed6100000190000000f00000000
[ 24.474] (II) modeset(0): 00000000001eb4027400000000fe0053
[ 24.474] (II) modeset(0): 414d53554e470a2020202020000000fe
[ 24.474] (II) modeset(0): 004c544e3137334b5430313030300026
[ 24.474] (II) modeset(0): Printing probed modes for output LVDS-1
[ 24.474] (II) modeset(0): Modeline "1600x900"x60.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz eP)
[ 24.474] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 24.474] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 24.474] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 24.474] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 24.474] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 24.474] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 24.474] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 24.474] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 24.474] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 24.475] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 24.475] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 24.475] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 24.475] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 24.475] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 24.475] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 24.475] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 24.475] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 24.475] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 24.475] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 24.475] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 24.475] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 24.475] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 24.475] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 24.475] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 24.475] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 24.475] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 24.475] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 24.475] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 24.475] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 24.476] (II) modeset(0): EDID for output VGA-2
[ 24.477] (II) modeset(0): EDID for output HDMI-1
[ 24.477] (II) modeset(0): EDID for output DP-1
[ 24.477] (II) modeset(0): Output LVDS-1 connected
[ 24.477] (II) modeset(0): Output VGA-2 disconnected
[ 24.477] (II) modeset(0): Output HDMI-1 disconnected
[ 24.477] (II) modeset(0): Output DP-1 disconnected
[ 24.477] (II) modeset(0): Using exact sizes for initial modes
[ 24.477] (II) modeset(0): Output LVDS-1 using initial mode 1600x900 +0+0
[ 24.477] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 24.477] (==) modeset(0): DPI set to (96, 96)
[ 24.477] (II) Loading sub module "fb"
[ 24.477] (II) LoadModule: "fb"
[ 24.477] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.493] (II) Module fb: vendor="X.Org Foundation"
[ 24.493] compiled for 1.19.1, module version = 1.0.0
[ 24.493] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.493] (II) Loading sub module "dri2"
[ 24.493] (II) LoadModule: "dri2"
[ 24.493] (II) Module "dri2" already built-in
[ 24.493] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 24.493] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 24.493] (==) NOUVEAU(G0): RGB weight 888
[ 24.493] (==) NOUVEAU(G0): Default visual is TrueColor
[ 24.493] (==) NOUVEAU(G0): Using HW cursor
[ 24.493] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[ 24.493] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[ 24.493] (==) NOUVEAU(G0): Page flipping enabled
[ 24.493] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[ 24.493] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[ 24.493] (II) NOUVEAU(G0): Initializing outputs ...
[ 24.528] (II) NOUVEAU(G0): Output VGA-1-1 has no monitor section
[ 24.528] (II) NOUVEAU(G0): 1 crtcs needed for screen.
[ 24.530] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen.
[ 24.530] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen.
[ 24.561] (II) NOUVEAU(G0): EDID for output VGA-1-1
[ 24.561] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-1
[ 24.561] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.561] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.561] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.561] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 24.561] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.561] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 24.561] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 24.561] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 24.561] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.561] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 24.561] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.561] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 24.561] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.561] (**) NOUVEAU(G0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 24.561] (II) NOUVEAU(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 24.561] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 24.561] (II) NOUVEAU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.561] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 24.561] (II) Loading sub module "fb"
[ 24.561] (II) LoadModule: "fb"
[ 24.561] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 24.561] (II) Module fb: vendor="X.Org Foundation"
[ 24.561] compiled for 1.19.1, module version = 1.0.0
[ 24.561] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.561] (II) Loading sub module "shadowfb"
[ 24.561] (II) LoadModule: "shadowfb"
[ 24.561] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 24.609] (II) Module shadowfb: vendor="X.Org Foundation"
[ 24.609] compiled for 1.19.1, module version = 1.0.0
[ 24.609] ABI class: X.Org ANSI C Emulation, version 0.4
[ 24.609] (II) UnloadModule: "fbdev"
[ 24.609] (II) Unloading fbdev
[ 24.609] (II) UnloadSubModule: "fbdevhw"
[ 24.609] (II) Unloading fbdevhw
[ 24.609] (II) UnloadModule: "vesa"
[ 24.609] (II) Unloading vesa
[ 24.609] (==) Depth 24 pixmap format is 32 bpp
[ 24.635] (II) NOUVEAU(G0): Channel setup complete.
[ 24.657] (II) NOUVEAU(G0): [COPY] async initialised.
[ 24.698] (II) NOUVEAU(G0): Hardware support for Present enabled
[ 24.698] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 24.698] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 24.698] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 24.698] (II) Loading sub module "exa"
[ 24.699] (II) LoadModule: "exa"
[ 24.699] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 24.706] (II) Module exa: vendor="X.Org Foundation"
[ 24.706] compiled for 1.19.1, module version = 2.6.0
[ 24.706] ABI class: X.Org Video Driver, version 23.0
[ 24.707] (II) EXA(256): Driver allocated offscreen pixmaps
[ 24.707] (II) EXA(256): Driver registered support for the following operations:
[ 24.707] (II) Solid
[ 24.707] (II) Copy
[ 24.707] (II) Composite (RENDER acceleration)
[ 24.707] (II) UploadToScreen
[ 24.707] (II) DownloadFromScreen
[ 24.707] (==) NOUVEAU(G0): Backing store enabled
[ 24.707] (==) NOUVEAU(G0): Silken mouse enabled
[ 24.707] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 24.707] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 24.707] (==) NOUVEAU(G0): DPMS enabled
[ 24.707] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.093] (==) modeset(0): Backing store enabled
[ 25.093] (==) modeset(0): Silken mouse enabled
[ 25.093] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.093] (==) modeset(0): DPMS enabled
[ 25.093] (II) modeset(0): [DRI2] Setup complete
[ 25.093] (II) modeset(0): [DRI2] DRI driver: i965
[ 25.093] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 25.093] (--) RandR disabled
[ 25.139] (II) SELinux: Disabled on system
[ 25.199] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 25.199] (II) AIGLX: enabled GLX_ARB_create_context
[ 25.199] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 25.199] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 25.199] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 25.199] (II) AIGLX: enabled GLX_SGI_swap_control
[ 25.199] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 25.199] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 25.199] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 25.199] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 25.199] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 25.199] (II) AIGLX: Loaded and initialized i965
[ 25.199] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 25.200] (II) NOUVEAU(G0): NVEnterVT is called.
[ 25.249] (II) modeset(0): Damage tracking initialized
[ 25.249] (II) modeset(0): Setting screen physical size to 423 x 238
[ 25.802] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 25.802] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 25.802] (II) LoadModule: "libinput"
[ 25.802] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 25.868] (II) Module libinput: vendor="X.Org Foundation"
[ 25.868] compiled for 1.19.0, module version = 0.23.0
[ 25.868] Module class: X.Org XInput Driver
[ 25.868] ABI class: X.Org XInput driver, version 24.1
[ 25.868] (II) Using input driver 'libinput' for 'Power Button'
[ 25.868] (**) Power Button: always reports core events
[ 25.868] (**) Option "Device" "/dev/input/event4"
[ 25.868] (**) Option "_source" "server/udev"
[ 25.869] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 25.869] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 25.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event4"
[ 25.884] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.884] (**) Option "xkb_model" "pc105"
[ 25.884] (**) Option "xkb_layout" "de"
[ 25.960] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 25.960] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 25.961] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 25.961] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 25.961] (II) Using input driver 'libinput' for 'Video Bus'
[ 25.961] (**) Video Bus: always reports core events
[ 25.961] (**) Option "Device" "/dev/input/event9"
[ 25.961] (**) Option "_source" "server/udev"
[ 25.962] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 25.962] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 25.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18/event9"
[ 25.976] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.976] (**) Option "xkb_model" "pc105"
[ 25.976] (**) Option "xkb_layout" "de"
[ 25.977] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 25.977] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 25.978] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 25.978] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 25.978] (II) Using input driver 'libinput' for 'Video Bus'
[ 25.978] (**) Video Bus: always reports core events
[ 25.978] (**) Option "Device" "/dev/input/event8"
[ 25.978] (**) Option "_source" "server/udev"
[ 25.978] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 25.978] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 25.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input17/event8"
[ 25.996] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 25.996] (**) Option "xkb_model" "pc105"
[ 25.996] (**) Option "xkb_layout" "de"
[ 25.997] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 25.997] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 25.998] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 25.998] (II) No input driver specified, ignoring this device.
[ 25.998] (II) This device may have been added with another device file.
[ 25.999] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 25.999] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 25.999] (II) Using input driver 'libinput' for 'Sleep Button'
[ 25.999] (**) Sleep Button: always reports core events
[ 25.999] (**) Option "Device" "/dev/input/event3"
[ 25.999] (**) Option "_source" "server/udev"
[ 26.000] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 26.000] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 26.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3"
[ 26.020] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.020] (**) Option "xkb_model" "pc105"
[ 26.020] (**) Option "xkb_layout" "de"
[ 26.021] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 26.021] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 26.024] (II) config/udev: Adding input device USB2.0 UVC 2M WebCam (/dev/input/event7)
[ 26.024] (**) USB2.0 UVC 2M WebCam: Applying InputClass "libinput keyboard catchall"
[ 26.024] (II) Using input driver 'libinput' for 'USB2.0 UVC 2M WebCam'
[ 26.024] (**) USB2.0 UVC 2M WebCam: always reports core events
[ 26.024] (**) Option "Device" "/dev/input/event7"
[ 26.024] (**) Option "_source" "server/udev"
[ 26.026] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is tagged by udev as: Keyboard
[ 26.026] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is a keyboard
[ 26.072] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event7"
[ 26.072] (II) XINPUT: Adding extended input device "USB2.0 UVC 2M WebCam" (type: KEYBOARD, id 10)
[ 26.072] (**) Option "xkb_model" "pc105"
[ 26.072] (**) Option "xkb_layout" "de"
[ 26.073] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is tagged by udev as: Keyboard
[ 26.073] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is a keyboard
[ 26.074] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 26.074] (II) No input driver specified, ignoring this device.
[ 26.074] (II) This device may have been added with another device file.
[ 26.074] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 26.075] (II) No input driver specified, ignoring this device.
[ 26.075] (II) This device may have been added with another device file.
[ 26.075] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 26.075] (II) No input driver specified, ignoring this device.
[ 26.075] (II) This device may have been added with another device file.
[ 26.076] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
[ 26.076] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 26.076] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 26.076] (**) Asus WMI hotkeys: always reports core events
[ 26.076] (**) Option "Device" "/dev/input/event6"
[ 26.076] (**) Option "_source" "server/udev"
[ 26.077] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[ 26.077] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is a keyboard
[ 26.096] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input13/event6"
[ 26.096] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 26.096] (**) Option "xkb_model" "pc105"
[ 26.096] (**) Option "xkb_layout" "de"
[ 26.097] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[ 26.097] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is a keyboard
[ 26.098] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.098] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 26.098] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 26.098] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.098] (**) Option "Device" "/dev/input/event0"
[ 26.098] (**) Option "_source" "server/udev"
[ 26.099] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 26.099] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 26.128] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.128] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 26.128] (**) Option "xkb_model" "pc105"
[ 26.128] (**) Option "xkb_layout" "de"
[ 26.129] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 26.129] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 26.130] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event1)
[ 26.130] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 26.130] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 26.130] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 26.130] (**) Option "Device" "/dev/input/event1"
[ 26.130] (**) Option "_source" "server/udev"
[ 26.131] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is tagged by udev as: Touchpad
[ 26.131] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is a touchpad
[ 26.164] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event1"
[ 26.164] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 26.165] (**) Option "AccelerationScheme" "none"
[ 26.165] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 26.165] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 26.165] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 26.165] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is tagged by udev as: Touchpad
[ 26.166] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is a touchpad
[ 26.166] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 26.166] (II) No input driver specified, ignoring this device.
[ 26.166] (II) This device may have been added with another device file.
[ 26.167] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.167] (II) No input driver specified, ignoring this device.
[ 26.167] (II) This device may have been added with another device file.
[ 48.395] (II) modeset(0): EDID vendor "SEC", prod id 21579
[ 48.395] (II) modeset(0): Printing DDC gathered Modelines:
[ 48.395] (II) modeset(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz eP)
[ 54.863] (II) modeset(0): EDID vendor "SEC", prod id 21579
[ 54.863] (II) modeset(0): Printing DDC gathered Modelines:
[ 54.863] (II) modeset(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz eP)
[ 105.560] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 105.560] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 129.099] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 129.159] (II) modeset(0): EDID vendor "SEC", prod id 21579
[ 129.159] (II) modeset(0): Printing DDC gathered Modelines:
[ 129.159] (II) modeset(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz eP)
[ 129.162] (II) NOUVEAU(G0): NVEnterVT is called.
[ 129.209] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 129.209] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 129.210] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 129.210] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 129.210] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 129.210] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 129.211] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 129.211] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 129.211] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is tagged by udev as: Keyboard
[ 129.211] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is a keyboard
[ 129.212] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[ 129.212] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is a keyboard
[ 129.212] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 129.212] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 129.212] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is tagged by udev as: Touchpad
[ 129.212] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is a touchpad
[ 272.896] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 272.896] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 304.668] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 304.723] (II) modeset(0): EDID vendor "SEC", prod id 21579
[ 304.723] (II) modeset(0): Printing DDC gathered Modelines:
[ 304.723] (II) modeset(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz eP)
[ 304.726] (II) NOUVEAU(G0): NVEnterVT is called.
[ 304.757] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 304.757] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 304.757] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 304.757] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 304.758] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 304.758] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 304.758] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 304.758] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 304.759] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is tagged by udev as: Keyboard
[ 304.759] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is a keyboard
[ 304.760] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[ 304.760] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is a keyboard
[ 304.760] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 304.760] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 304.760] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is tagged by udev as: Touchpad
[ 304.761] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is a touchpad
[ 6032.608] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 6032.608] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 6126.152] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 6126.214] (II) modeset(0): EDID vendor "SEC", prod id 21579
[ 6126.214] (II) modeset(0): Printing DDC gathered Modelines:
[ 6126.214] (II) modeset(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz eP)
[ 6126.217] (II) NOUVEAU(G0): NVEnterVT is called.
[ 6126.248] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 6126.248] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 6126.248] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 6126.248] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 6126.249] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 6126.249] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 6126.249] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 6126.249] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 6126.250] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is tagged by udev as: Keyboard
[ 6126.250] (II) input device 'USB2.0 UVC 2M WebCam', /dev/input/event7 is a keyboard
[ 6126.250] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[ 6126.250] (II) input device 'Asus WMI hotkeys', /dev/input/event6 is a keyboard
[ 6126.251] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 6126.251] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 6126.251] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is tagged by udev as: Touchpad
[ 6126.251] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event1 is a touchpad
[ 6135.832] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 6135.832] (II) NOUVEAU(G0): NVLeaveVT is called.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=11104857
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16028286
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_01
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=13861897
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input18/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16028503
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input17
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input17
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=13859924
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input17/event8
N: input/event8
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input17/event8
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16029381
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=11017936
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16028928
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=11102832
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16028910
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_UVC_2M_WebCam
E: ID_MODEL_ENC=USB2.0\x20UVC\x202M\x20WebCam
E: ID_MODEL_ID=5122
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0202
E: ID_SERIAL=USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam
E: ID_SERIAL_SHORT=USB2.0_UVC_2M_WebCam
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=USB2.0_UVC_2M_WebCam
E: ID_VENDOR_ENC=USB2.0\x20UVC\x202M\x20WebCam
E: ID_VENDOR_ID=13d3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v13D3p5122e0202-e0,1,kD4,ramlsfw
E: NAME="USB2.0 UVC 2M WebCam"
E: PHYS="usb-0000:00:1a.0-1.2/button"
E: PRODUCT=3/13d3/5122/202
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=13516212
P: /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event7
N: input/event7
S: input/by-id/usb-USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam-event-if00
S: input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.0-event /dev/input/by-id/usb-USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam-event-if00
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event7
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_UVC_2M_WebCam
E: ID_MODEL_ENC=USB2.0\x20UVC\x202M\x20WebCam
E: ID_MODEL_ID=5122
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0202
E: ID_SERIAL=USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam_USB2.0_UVC_2M_WebCam
E: ID_SERIAL_SHORT=USB2.0_UVC_2M_WebCam
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=USB2.0_UVC_2M_WebCam
E: ID_VENDOR_ENC=USB2.0\x20UVC\x202M\x20WebCam
E: ID_VENDOR_ID=13d3
E: LIBINPUT_DEVICE_GROUP=3/13d3/5122/202:usb-0000:00:1a.0-1
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=16028615
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=15791562
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=16028980
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=15791095
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=18019858
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=17983183
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=18040095
P: /devices/platform/asus-nb-wmi/input/input13
E: DEVPATH=/devices/platform/asus-nb-wmi/input/input13
E: EV=100013
E: ID_FOR_SEAT=input-platform-asus-nb-wmi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-asus-nb-wmi
E: ID_PATH_TAG=platform-asus-nb-wmi
E: KEY=1000000080000 0 800000000000 0 0 a1606f00900000 8200027800501000 e000000000000 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,14,k71,72,73,8C,94,96,A3,A4,A5,A6,A9,B9,BF,D4,D7,E0,E1,E2,E3,E5,E6,ED,EE,F0,F5,F7,1AF,213,230,ram4,lsfw
E: MSC=10
E: NAME="Asus WMI hotkeys"
E: PHYS="asus-nb-wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=11865013
P: /devices/platform/asus-nb-wmi/input/input13/event6
N: input/event6
S: input/by-path/platform-asus-nb-wmi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-asus-nb-wmi-event
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/asus-nb-wmi/input/input13/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-asus-nb-wmi
E: ID_PATH_TAG=platform-asus-nb-wmi
E: KEYBOARD_KEY_6b=f21
E: LIBINPUT_DEVICE_GROUP=19/0/0/0:asus-nb-wmi
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16028553
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1937963
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab41:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=16028680
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio4/input/input8
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio4/input/input8
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-4
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: KEY=e420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ee0000-e0,1,3,k110,111,145,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="ETPS/2 Elantech Touchpad"
E: PHYS="isa0060/serio4/input0"
E: PRODUCT=11/2/e/0
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2982234
P: /devices/platform/i8042/serio4/input/input8/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/i8042/serio4/input/input8/event1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=18
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=37
E: LIBINPUT_ATTR_RESOLUTION_HINT=31x31
E: LIBINPUT_DEVICE_GROUP=11/2/e/0:isa0060/serio4
E: LIBINPUT_MODEL_ELANTECH_TOUCHPAD=1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=16068909
P: /devices/platform/i8042/serio4/input/input8/mouse0
N: input/mouse0
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio4/input/input8/mouse0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2983161
P: /devices/platform/pcspkr/input/input12
E: DEVPATH=/devices/platform/pcspkr/input/input12
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=11337271
P: /devices/platform/pcspkr/input/input12/event5
N: input/event5
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/pcspkr/input/input12/event5
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=16029139
DRM Information from dmesg:
---------------------------
[ 1.962021] Linux agpgart interface v0.103
[ 11.920907] [drm] Initialized
[ 12.912092] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[ 12.912093] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 12.912097] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 12.912098] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 12.912099] nouveau 0000:01:00.0: DRM: DCB outp 00: 02011300 00000000
[ 12.912101] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[ 12.914254] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.914255] [drm] Driver supports precise vblank timestamp query.
[ 12.947733] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 12.986077] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x60000, bo ffff9bf786ff4400
[ 13.085718] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 13.959629] [drm] Memory usable by graphics device = 2048M
[ 13.959633] [drm] Replacing VGA console driver
[ 13.965744] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.965747] [drm] Driver supports precise vblank timestamp query.
[ 14.002875] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 1
[ 14.005518] fbcon: inteldrmfb (fb1) is primary device
[ 15.927811] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
-- System Information:
Debian Release: 9.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.24-9
ii libdrm-intel1 2.4.74-1
ii libdrm2 2.4.74-1
ii libpciaccess0 0.13.4-1
ii libpixman-1-0 0.34.0-1
ii libudev1 232-15
ii libx11-6 2:1.6.4-3
ii libx11-xcb1 2:1.6.4-3
ii libxcb-dri2-0 1.12-1
ii libxcb-dri3-0 1.12-1
ii libxcb-sync1 1.12-1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.12-1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.3-1
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.5.1-1
ii libxrender1 1:0.9.10-1
ii libxshmfence1 1.2-1
ii libxss1 1:1.2.2-1
ii libxtst6 2:1.2.3-1
ii libxv1 2:1.0.11-1
ii libxvmc1 2:1.0.10-1
ii xserver-xorg-core [xorg-video-abi-23] 2:1.19.1-4
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
--- End Message ---