At 2017-11-07T08:10:40-0500, G. Branden Robinson wrote: > Here's an updated version of the patch, reverting the de-boldfacing of > action names (and some token names) in resource translations. Of course, by sending that I guaranteed I'd find a problem with it. Here's my next try. The problem with the previous was stuff like this: \\fP(ti in many of the resource translation lines. Third try attached. -- Regards, Branden
--- xterm-330/xterm.man 2017-06-18 14:07:02.000000000 -0400
+++ xterm-330-branden/xterm.man 2017-11-07 08:15:09.462564868 -0500
@@ -61,16 +61,16 @@
.\"
.\" Bulleted paragraph
.de bP
-.ie \n(.IP \(bu 4
-.el .IP \(bu 2
+.ie n .IP \(bu 4
+.el .IP \(bu 2
..
.\" these would be fallbacks for DS/DE,
.\" but groff changed the meaning of the macros.
.de NS
-.ie \n(.sp
-.el .sp .5
-.ie \n(.in +4
-.el .in +2
+.ie n .sp
+.el .sp .5
+.ie n .in +4
+.el .in +2
.nf
.ft C \" Courier
..
@@ -912,7 +912,7 @@
Also, \fI\*n\ \-e\fP is supposed to provide a consistent
functionality for other applications that need to start text-mode
programs in a window, and if \fBloginShell\fP were not ignored, the
-result of ~/.profile might interfere with that.
+result of \(ti/.profile might interfere with that.
.IP
If you do want the effect of \fB\-ls\fP and \fB\-e\fP simultaneously, you
may get away with something like
@@ -1325,9 +1325,9 @@
(the first two are equivalent
since the descriptor follows the last \*(``/\*(''):
.NS 15
--S/dev/pts/123/45
--S123/45
--Sab34
+\-S/dev/pts/123/45
+\-S123/45
+\-Sab34
.NE
.IP
Note that \fI\*n\fP does not close any file descriptor
@@ -1488,13 +1488,13 @@
.bP
.B ptyInitialErase\fP (PIE), along with the
.bP
-\fIstty\fP erase character (^H for backspace, ^? for delete)
+\fIstty\fP erase character (\(haH for backspace, \(ha? for delete)
.RE
.IP
will affect DECBKM. First, \fI\*n\fP obtains the initial \fIerase\fP character:
.RS
.bP
-\fI\*n\fP's internal value is ^H
+\fI\*n\fP's internal value is \(haH
.bP
\fI\*n\fP asks the operating system for the value which \fBstty\fP shows
.bP
@@ -1509,14 +1509,14 @@
_ _ _ _
l c c c.
\fBPIE\fR \fBstty\fR \fBtermcap\fR \fIerase\fP
-false ^H ^H ^H
-false ^H ^? ^?
-false ^? ^H ^H
-false ^? ^? ^?
-true ^H ^H ^H
-true ^H ^? ^H
-true ^? ^H ^?
-true ^? ^? ^?
+false \(haH \(haH \(haH
+false \(haH \(ha? \(ha?
+false \(ha? \(haH \(haH
+false \(ha? \(ha? \(ha?
+true \(haH \(haH \(haH
+true \(haH \(ha? \(haH
+true \(ha? \(haH \(ha?
+true \(ha? \(ha? \(ha?
.TE
.IP
Using that \fIerase\fP character, \fI\*n\fP allows further choices:
@@ -1526,8 +1526,9 @@
character for the initial state of \fBDECBKM\fP
.bP
if \fBbackarrowKeyIsErase\fP is false, \fI\*n\fP sets \fBDECBKM\fP
-to 2 (internal). This ties together \fBbackarrowKey\fP
-and the control sequence for \fBDECBKM\fP
+to 2 (internal).
+This ties together \fBbackarrowKey\fP and the control sequence for
+\fBDECBKM\fP.
.bP
applications can send a control sequence to set/reset \fBDECBKM\fP control set
.bP
@@ -1540,14 +1541,14 @@
_ _ _ _ _
c l l c c.
\fIerase\fR \fBBKIE\fR \fBBK\fR \fBDECBKM\fP \fIresult\fP
-^? false false 2 ^H
-^? false true 2 ^?
-^? true false 0 ^?
-^? true true 1 ^?
-^H false false 2 ^H
-^H false true 2 ^?
-^H true false 0 ^H
-^H true true 1 ^H
+\(ha? false false 2 \(haH
+\(ha? false true 2 \(ha?
+\(ha? true false 0 \(ha?
+\(ha? true true 1 \(ha?
+\(haH false false 2 \(haH
+\(haH false true 2 \(ha?
+\(haH true false 0 \(haH
+\(haH true true 1 \(haH
.TE
.TP 8
.B "fullscreen\fP (class\fB Fullscreen\fP)"
@@ -1911,17 +1912,18 @@
susp,
swtch and
weras.
-Control characters may be specified as ^char (e.g., ^c or ^u)
-and \fB^?\fP may be used to indicate delete (127).
-Use \fB^\-\fP to denote \fIundef\fP.
-Use \fB\\034\fP to represent \fB^\\\fP, since a literal backslash in
+Control characters may be specified as \fB\(ha\fPchar
+(e.g., \fB\(hac\fP or \fB\(hau\fP)
+and \fB\(ha?\fP may be used to indicate delete (127).
+Use \fB\(ha\-\fP to denote \fIundef\fP.
+Use \fB\e034\fP to represent \fB\(ha\e\fP, since a literal backslash in
an X resource escapes the next character.
.IP
This is very useful for overriding
the default terminal settings without having to do an \fIstty\fP every time
an \fI\*n\fP is started.
Note, however, that the \fIstty\fP program on a given host may use different
-keywords; \fI\*n\fR's table is built-in.
+keywords; \fI\*n\fR's table is built in.
.IP
If the \fBttyModes\fP resource specifies a value for \fBerase\fP,
that overrides the \fBptyInitialErase\fP resource setting,
@@ -2443,7 +2445,7 @@
.B "charClass\fP (class\fB CharClass\fP)"
Specifies comma-separated lists of character class bindings of the form
.NS
-\fIlow\fP[-\fIhigh]\fP[:\fIvalue\fP].
+\fIlow\fP[\-\fIhigh]\fP[:\fIvalue\fP].
.NE
.IP
These are used in determining which
@@ -3064,9 +3066,9 @@
.IP
It is possible to select suitable bitmap fonts using a script such as this:
.NS
-\&#!/bin/sh
-\&FONT=`xfontsel -print`
-\&test -n "$FONT" && xfd -fn "$FONT"
+#!/bin/sh
+FONT=\(gaxfontsel \-print\(ga
+test \-n "$FONT" && xfd \-fn "$FONT"
.NE
.IP
However (even though \fIxfd\fP accepts a \*(``\fB\-fa\fP\*('' option
@@ -3074,7 +3076,7 @@
\fIxfontsel\fP has not been similarly extended.
As a workaround, you may try
.NS
-fc-list :scalable=true:spacing=mono: family
+fc\-list :scalable=true:spacing=mono: family
.NE
.IP
to find a list of scalable fixed-pitch fonts
@@ -3389,8 +3391,9 @@
\fBCOMPOUND_TEXT\fP
or
\fBTEXT\fP.
-The default is \*(``true\*(''. It may be set to false in order to work around
-ICCCM violations by other X clients.
+The default is \*(``true\*(''.
+It may be set to false in order to work around ICCCM violations by other
+X clients.
.TP 8
.B "iconBorderColor\fP (class\fB BorderColor\fP)"
Specifies the border color for the active icon window if this feature
@@ -3535,7 +3538,7 @@
If the encoding converter requires command-line parameters,
you can add those after the command, e.g.,
.NS
-*localeFilter: xterm-filter -p
+*localeFilter: xterm\-filter \-p
.NE
.IP
Alternatively,
@@ -3582,7 +3585,7 @@
.IP
The default is \*(``1000x1000\*('' (given as \fIwidth\fP by \fIheight\fP).
.IP
-If the resource is \*(``auto\*('' then \fI\*n\fR will use the
+If the resource is \*(``auto\*('' then \fI\*n\fR will use the
\fBdecTerminalID\fP resource:
.TS
l l
@@ -3818,7 +3821,7 @@
The \fBkeyboardType\fP resource is the preferred mechanism for selecting this mode.
.IP
The old-style escape sequences resemble VT220 keys,
-but appear to have been invented for \fI\*n\fP in X11R4.
+but appear to have been invented for \fI\*n\fP in X11R4.
.TP 8
.B "on2Clicks\fP (class\fB On2Clicks\fP)"
.TP
@@ -4065,7 +4068,7 @@
.TP 8
.B "privateColorRegisters\fP (class\fB PrivateColorRegisters\fP)"
If \fI\*n\fR is configured to support ReGIS or SIXEL graphics,
-this controls whether \fI\*n\fR
+this controls whether \fI\*n\fR
allocates separate color registers for each sixel
device control string, e.g., for DECGCI.
If not true, color registers are allocated only once,
@@ -4165,8 +4168,8 @@
This is a different issue than unsupported preedit type, etc.
You may encounter retries if your X configuration (and its libraries)
are missing pieces.
-Setting this resource to zero ``0'' will cancel the retrying.
-The default is ``3''.
+Setting this resource to zero \*(``0\*(`` will cancel the retrying.
+The default is \*(``3\*(``.
.TP 8
.B "reverseVideo\fP (class\fB ReverseVideo\fP)"
Specifies whether or not reverse video should be simulated.
@@ -5020,7 +5023,7 @@
Pointer button one (usually left)
is used to save text into the cut buffer:
.NS
-~Meta <Btn1Down>:\fBselect-start\fP()
+\(tiMeta <Btn1Down>:\fBselect\-start\fP()
.NE
.IP
Move the cursor to beginning of the text,
@@ -5029,16 +5032,15 @@
The selected text is highlighted and is saved in the global \fIcut buffer\fP
and made the selection when the button is released:
.NS
-<BtnUp>:\fBselect-end\fP(\fBSELECT\fP, CUT_BUFFER0) \n\
+<BtnUp>:\fBselect\-end\fP(\fBSELECT\fP, \fBCUT_BUFFER0\fP)
.NE
.IP
-Normally (but see the discussion of \fBon2Clicks\fP, etc):
+Normally (but see the discussion of \fBon2Clicks\fP, etc.):
.RS
.bP
Double-clicking selects by words.
.bP
-Triple-clicking
-selects by lines.
+Triple-clicking selects by lines.
.bP
Quadruple-clicking goes back to characters, etc.
.RE
@@ -5058,14 +5060,14 @@
the given selection, if any,
otherwise from the cut buffer, inserting it as keyboard input:
.NS
-~Ctrl ~Meta <Btn2Up>:\fB\fBinsert-selection\fP\fP(\fBSELECT\fP, CUT_BUFFER0)
+\(tiCtrl \(tiMeta <Btn2Up>:\fBinsert\-selection\fP(\fBSELECT\fP, \fBCUT_BUFFER0\fP)
.NE
.
.TP 5
Pointer button three (usually right)
\fIextends\fP the current selection.
.NS
-~Ctrl ~Meta <Btn3Down>:\fB\fBstart-extend\fP\fP()
+\(tiCtrl \(tiMeta <Btn3Down>:\fBstart\-extend()
.NE
.IP
(Without loss of generality,
@@ -5162,14 +5164,16 @@
which states
.RS
.PP
-The selection named by the atom \fBPRIMARY\fP is used for all commands that take only a single argument and is the principal means of communication between clients that use the selection mechanism.
+The selection named by the atom \fBPRIMARY\fP is used for all commands
+that take only a single argument and is the principal means of
+communication between clients that use the selection mechanism.
.RE
.SS SELECT
.PP
However, many applications use \fBCLIPBOARD\fP in imitation of other windowing
systems.
The \fBselectToClipboard\fP resource (and corresponding menu entry
-\fBSelect to Clipboard\fP) introduce the SELECT token (known only
+\fBSelect to Clipboard\fP) introduce the \fBSELECT\fP token (known only
to \fI\*n\fP) which chooses between the \fBPRIMARY\fP and \fBCLIPBOARD\fP tokens.
.PP
Without using this feature, one can use workarounds such as the
@@ -5356,8 +5360,9 @@
in CSS 2.2.
.IP
The font is whatever your browser uses for preformatted (<pre>)
-elements. The XHTML file references a cascading style sheet (CSS)
-named \*(``\fBxterm.css\fP\*('' that you can create to select a font or
+elements.
+The XHTML file references a cascading style sheet (CSS) named
+\*(``\fBxterm.css\fP\*('' that you can create to select a font or
override properties.
.RS
.LP
@@ -5382,8 +5387,9 @@
.RE
.IP
Attributes faint, reverse and blink are implemented as \fIstyle\fP attributes
-setting color properties. All colors are specified as RGB percentages
-in order to support displays with 10 bits per RGB.
+setting color properties.
+All colors are specified as RGB percentages in order to support displays
+with 10 bits per RGB.
.IP
The name of the file will be
.NS
@@ -5407,7 +5413,7 @@
The \fBdump-html\fP action can also be triggered using the Media Copy
control sequence CSI 1 0 i, for example from a shell script with
.NS
-printf '\\033[10i'
+printf \*(AQ\e033[10i\*(AQ
.NE
.sp
Only the UTF-8 encoding is supported.
@@ -5446,7 +5452,7 @@
The \fBdump-svg\fP action can also be triggered using the Media Copy
control sequence CSI 1 1 i, for example from a shell script with
.NS
-printf '\\033[11i'
+printf \*(AQ\e033[11i\*(AQ
.NE
.sp
Only the UTF-8 encoding is supported.
@@ -5860,7 +5866,7 @@
this command will launch \fI\*n\fP able to switch between UTF-8
and ISO-8859-1 encoded fonts:
.NS
-u\*n -class __default_class__
+u\*n \-class __default_class__
.NE
.RE
.PP
@@ -6048,70 +6054,70 @@
The default table starts as follows \-
.NS
static int charClass[256] = {
-/\(** NUL SOH STX ETX EOT ENQ ACK BEL */
+/\(** NUL SOH STX ETX EOT ENQ ACK BEL \(**/
32, 1, 1, 1, 1, 1, 1, 1,
-/\(** BS HT NL VT NP CR SO SI */
+/\(** BS HT NL VT NP CR SO SI \(**/
1, 32, 1, 1, 1, 1, 1, 1,
-/\(** DLE DC1 DC2 DC3 DC4 NAK SYN ETB */
+/\(** DLE DC1 DC2 DC3 DC4 NAK SYN ETB \(**/
1, 1, 1, 1, 1, 1, 1, 1,
-/\(** CAN EM SUB ESC FS GS RS US */
+/\(** CAN EM SUB ESC FS GS RS US \(**/
1, 1, 1, 1, 1, 1, 1, 1,
-/\(** SP ! " # $ % & \*(AQ */
+/\(** SP ! " # $ % & \*(AQ \(**/
.\" " <- for emacs autocolor to work well :-)
32, 33, 34, 35, 36, 37, 38, 39,
-/\(** ( ) * + , \- . / */
+/\(** ( ) * + , \- . / \(**/
40, 41, 42, 43, 44, 45, 46, 47,
-/\(** 0 1 2 3 4 5 6 7 */
+/\(** 0 1 2 3 4 5 6 7 \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** 8 9 : ; < = > ? */
+/\(** 8 9 : ; < = > ? \(**/
48, 48, 58, 59, 60, 61, 62, 63,
-/\(** @ A B C D E F G */
+/\(** @ A B C D E F G \(**/
64, 48, 48, 48, 48, 48, 48, 48,
-/\(** H I J K L M N O */
+/\(** H I J K L M N O \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** P Q R S T U V W */
+/\(** P Q R S T U V W \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** X Y Z [ \\ ] ^ _ */
+/\(** X Y Z [ \e ] \(ha _ \(**/
48, 48, 48, 91, 92, 93, 94, 48,
-/\(** ` a b c d e f g */
+/\(** \(ga a b c d e f g \(**/
96, 48, 48, 48, 48, 48, 48, 48,
-/\(** h i j k l m n o */
+/\(** h i j k l m n o \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** p q r s t u v w */
+/\(** p q r s t u v w \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** x y z { | } ~ DEL */
+/\(** x y z { | } \(ti DEL \(**/
48, 48, 48, 123, 124, 125, 126, 1,
-/\(** x80 x81 x82 x83 IND NEL SSA ESA */
+/\(** x80 x81 x82 x83 IND NEL SSA ESA \(**/
1, 1, 1, 1, 1, 1, 1, 1,
-/\(** HTS HTJ VTS PLD PLU RI SS2 SS3 */
+/\(** HTS HTJ VTS PLD PLU RI SS2 SS3 \(**/
1, 1, 1, 1, 1, 1, 1, 1,
-/\(** DCS PU1 PU2 STS CCH MW SPA EPA */
+/\(** DCS PU1 PU2 STS CCH MW SPA EPA \(**/
1, 1, 1, 1, 1, 1, 1, 1,
-/\(** x98 x99 x9A CSI ST OSC PM APC */
+/\(** x98 x99 x9A CSI ST OSC PM APC \(**/
1, 1, 1, 1, 1, 1, 1, 1,
-/\(** \- i c/ L ox Y\- | So */
+/\(** nbsp \(r! \(ct \(Po \(Cs \(Ye \(bb \(sc \(**/
160, 161, 162, 163, 164, 165, 166, 167,
-/\(** .. c0 ip << _ R0 \- */
+/\(** \(ad \(co \(Of \(Fo \(no shy \(rg \(a- \(**/
168, 169, 170, 171, 172, 173, 174, 175,
-/\(** o +\- 2 3 \*(AQ u q| . */
+/\(** \(de \(+- \(S2 \(S3 \(aa \(mc \(ps \(pc \(**/
176, 177, 178, 179, 180, 181, 182, 183,
-/\(** , 1 2 >> 1/4 1/2 3/4 ? */
+/\(** \(ac \(S1 \(Om \(Fc \(14 \(12 \(34 \(r? \(**/
184, 185, 186, 187, 188, 189, 190, 191,
-/\(** A` A\*(AQ A^ A~ A: Ao AE C, */
+/\(** \(`A \('A \(^A \(~A \(:A \(oA \(AE \(,C \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** E` E\*(AQ E^ E: I` I\*(AQ I^ I: */
+/\(** \(`E \('E \(^E \(:E \(`I \('I \(^I \(:I \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** D\- N~ O` O\*(AQ O^ O~ O: X */
+/\(** \(-D \(~N \(`O \('O \(^O \(~O \(:O \(mu \(**/
48, 48, 48, 48, 48, 48, 48, 215,
-/\(** O/ U` U\*(AQ U^ U: Y\*(AQ P B */
+/\(** \(/O \(`U \('U \(^U \(:U \('Y \(TP \(ss \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** a` a\*(AQ a^ a~ a: ao ae c, */
+/\(** \(`a \('a \(^a \(~a \(:a \(oa \(ae \(,c \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** e` e\*(AQ e^ e: i` i\*(AQ i^ i: */
+/\(** \(`e \('e \(^e \(:e \(`i \('i \(^i \(:i \(**/
48, 48, 48, 48, 48, 48, 48, 48,
-/\(** d n~ o` o\*(AQ o^ o~ o: \-: */
+/\(** \(Sd \(~n \(`o \('o \(^o \(~o \(:o \(di \(**/
48, 48, 48, 48, 48, 48, 48, 247,
-/\(** o/ u` u\*(AQ u^ u: y\*(AQ P y: */
+/\(** \(/o \(`u \('u \(^u \(:u \('y \(Tp \(:y \(**/
48, 48, 48, 48, 48, 48, 48, 48};
.NE
.IP
@@ -6208,8 +6214,8 @@
of \*(``dynamic abbreviation\*('' expansion in Emacs (bound there to M\-/).
Here is a resource setting for \fI\*n\fP which will do the same thing:
.NS
-*VT100*translations: #override \\n\\\&
- Meta <KeyPress> /:\fBdabbrev-expand\fP()
+*VT100*translations: #override \en\e
+ Meta <KeyPress> /:\fBdabbrev\-expand\fP()
.NE
.TP 8
.B "deiconify()"
@@ -6224,7 +6230,7 @@
(i.e., character line and column) in the following format:
.sp
.in +8
-^X ESC G <line+\*(`` \*(''> <col+\*(`` \*(''>
+\(haX ESC G <line+\*(`` \*(''> <col+\*(`` \*(''>
.in -8
.TP 8
.B "exec-formatted(\fIformat\fP, \fIsourcename\fP [, ...])"
@@ -6285,8 +6291,8 @@
to view a file whose name is selected while holding the shift key down.
The new process is started when the mouse button is released:
.NS
-*VT100*translations: #override Shift \\
- <Btn1Up>:\fBexec-formatted\fP("xterm -e view '%t'", \fBSELECT\fP)
+*VT100*translations: #override Shift \e
+ <Btn1Up>:\fBexec\-formatted\fP("xterm \-e view \*(AQ%t\*(AQ", \fBSELECT\fP)
.NE
.TP 8
.B "exec-selectable(\fIformat\fP, \fIonClicks\fP)"
@@ -6362,9 +6368,9 @@
Sources are checked in the order given (case is
significant) until one is found.
Commonly-used selections include:
-\fIPRIMARY\fP, \fISECONDARY\fP, and \fICLIPBOARD\fP.
+\fBPRIMARY\fP, \fBSECONDARY\fP, and \fBCLIPBOARD\fP.
Cut buffers are
-typically named \fICUT_BUFFER0\fP through \fICUT_BUFFER7\fP.
+typically named \fBCUT_BUFFER0\fP through \fBCUT_BUFFER7\fP.
.TP 8
.B "insert-seven-bit()"
This action is a synonym for \fBinsert()\fP.
@@ -6377,8 +6383,8 @@
the host.
This works by inserting the control sequence at the front
of the input buffer.
-Use \*(``\\\*('' to escape octal digits in the string.
-Xt does not allow you to put a null character (i.e., \*(``\\000\*('') in the string.
+Use \*(``\e\*('' to escape octal digits in the string.
+Xt does not allow you to put a null character (i.e., \*(``\e000\*('') in the string.
.TP 8
.B "keymap(\fIname\fP)"
This action dynamically defines a new translation table whose resource
@@ -6424,33 +6430,33 @@
.TP 5
noFormFeed
no form feed will be sent at the end of the last line printed
-(i.e., \fBprinterFormFeed\fP is ``false'').
+(i.e., \fBprinterFormFeed\fP is \*(``false\*(``).
.TP 5
FormFeed
a form feed will be sent at the end of the last line printed
-(i.e., \fBprinterFormFeed\fP is ``true'').
+(i.e., \fBprinterFormFeed\fP is \*(``true\*(``).
.TP 5
noNewLine
no newline will be sent at the end of the last line printed,
and wrapped lines will be combined into long lines
-(i.e., \fBprinterNewLine\fP is ``false'').
+(i.e., \fBprinterNewLine\fP is \*(``false\*(``).
.TP 5
NewLine
a newline will be sent at the end of the last line printed,
and each line will be limited (by adding a newline) to the screen width
-(i.e., \fBprinterNewLine\fP is ``true'').
+(i.e., \fBprinterNewLine\fP is \*(``true\*(``).
.TP 5
noAttrs
the page is printed without attributes
-(i.e., \fBprintAttributes\fP is ``0'').
+(i.e., \fBprintAttributes\fP is \*(``0\*(``).
.TP 5
monoAttrs
the page is printed with monochrome (vt220) attributes
-(i.e., \fBprintAttributes\fP is ``1'').
+(i.e., \fBprintAttributes\fP is \*(``1\*(``).
.TP 5
colorAttrs
the page is printed with ANSI color attributes
-(i.e., \fBprintAttributes\fP is ``2'').
+(i.e., \fBprintAttributes\fP is \*(``2\*(``).
.RE
.TP 8
.B "print-everything(\fIprinter-flags\fP)"
@@ -6869,16 +6875,16 @@
in the screen relative to the current line:
.sp
.in +8
-ESC ^P
+ESC \(haP
.in -8
or
.in +8
-ESC ^N
+ESC \(haN
.in -8
.sp
according to whether the event is before, or after the current line,
respectively.
-The ^N (or ^P) is repeated once for each line that the event differs
+The \(haN (or \(haP) is repeated once for each line that the event differs
from the current line.
The control sequence is omitted altogether if the button event is on the
current line.
@@ -6898,70 +6904,70 @@
which is set by the \fBselectToClipboard\fP resource.
These are for the \fIvt100\fP widget:
.NS
- Shift <KeyPress> Prior:\fBscroll-back\fP(1,halfpage) \\n\\\&
- Shift <KeyPress> Next:\fBscroll-forw\fP(1,halfpage) \\n\\\&
- Shift <KeyPress> Select:\fBselect-cursor-start\fP() \\\&
- \fBselect-cursor-end\fP(\fBSELECT\fP, CUT_BUFFER0) \\n\\\&
- Shift <KeyPress> Insert:\fBinsert-selection\fP(\fBSELECT\fP, CUT_BUFFER0) \\n\\\&
- Alt <Key>Return:\fBfullscreen\fP() \\n\\\&
- <KeyRelease> Scroll_Lock:\fBscroll-lock\fP() \\n\\\&
- Shift~Ctrl <KeyPress> KP_Add:\fBlarger-vt-font\fP() \\n\\\&
- Shift Ctrl <KeyPress> KP_Add:\fBsmaller-vt-font\fP() \\n\\\&
- Shift <KeyPress> KP_Subtract:\fBsmaller-vt-font\fP() \\n\\\&
- ~Meta <KeyPress>:\fBinsert-seven-bit\fP() \\n\\\&
- Meta <KeyPress>:\fBinsert-eight-bit\fP() \\n\\\&
- !Ctrl <Btn1Down>:\fBpopup-menu\fP(mainMenu) \\n\\\&
- !Lock Ctrl <Btn1Down>:\fBpopup-menu\fP(mainMenu) \\n\\\&
- !Lock Ctrl @Num_Lock <Btn1Down>:\fBpopup-menu\fP(mainMenu) \\n\\\&
- ! @Num_Lock Ctrl <Btn1Down>:\fBpopup-menu\fP(mainMenu) \\n\\\&
- ~Meta <Btn1Down>:\fBselect-start\fP() \\n\\\&
- ~Meta <Btn1Motion>:\fBselect-extend\fP() \\n\\\&
- !Ctrl <Btn2Down>:\fBpopup-menu\fP(vtMenu) \\n\\\&
- !Lock Ctrl <Btn2Down>:\fBpopup-menu\fP(vtMenu) \\n\\\&
- !Lock Ctrl @Num_Lock <Btn2Down>:\fBpopup-menu\fP(vtMenu) \\n\\\&
- ! @Num_Lock Ctrl <Btn2Down>:\fBpopup-menu\fP(vtMenu) \\n\\\&
- ~Ctrl ~Meta <Btn2Down>:\fBignore\fP() \\n\\\&
- Meta <Btn2Down>:\fBclear-saved-lines\fP() \\n\\\&
- ~Ctrl ~Meta <Btn2Up>:\fBinsert-selection\fP(\fBSELECT\fP, CUT_BUFFER0) \\n\\\&
- !Ctrl <Btn3Down>:\fBpopup-menu\fP(fontMenu) \\n\\\&
- !Lock Ctrl <Btn3Down>:\fBpopup-menu\fP(fontMenu) \\n\\\&
- !Lock Ctrl @Num_Lock <Btn3Down>:\fBpopup-menu\fP(fontMenu) \\n\\\&
- ! @Num_Lock Ctrl <Btn3Down>:\fBpopup-menu\fP(fontMenu) \\n\\\&
- ~Ctrl ~Meta <Btn3Down>:\fBstart-extend\fP() \\n\\\&
- ~Meta <Btn3Motion>:\fBselect-extend\fP() \\n\\\&
- Ctrl <Btn4Down>:\fBscroll-back\fP(1,halfpage,m) \\n\\\&
- Lock Ctrl <Btn4Down>:\fBscroll-back\fP(1,halfpage,m) \\n\\\&
- Lock @Num_Lock Ctrl <Btn4Down>:\fBscroll-back\fP(1,halfpage,m) \\n\\\&
- @Num_Lock Ctrl <Btn4Down>:\fBscroll-back\fP(1,halfpage,m) \\n\\\&
- <Btn4Down>:\fBscroll-back\fP(5,line,m) \\n\\\&
- Ctrl <Btn5Down>:\fBscroll-forw\fP(1,halfpage,m) \\n\\\&
- Lock Ctrl <Btn5Down>:\fBscroll-forw\fP(1,halfpage,m) \\n\\\&
- Lock @Num_Lock Ctrl <Btn5Down>:\fBscroll-forw\fP(1,halfpage,m) \\n\\\&
- @Num_Lock Ctrl <Btn5Down>:\fBscroll-forw\fP(1,halfpage,m) \\n\\\&
- <Btn5Down>:\fBscroll-forw\fP(5,line,m) \\n\\\&
- <BtnUp>:\fBselect-end\fP(\fBSELECT\fP, CUT_BUFFER0) \\n\\\&
- <BtnDown>:\fBignore\fP()
+ Shift <KeyPress> Prior:\fBscroll\-back\fP(1,halfpage) \en\e
+ Shift <KeyPress> Next:\fBscroll\-forw\fP(1,halfpage) \en\e
+ Shift <KeyPress> Select:\fBselect\-cursor\-start\fP() \e
+ select\-cursor\-end\fP(\fBSELECT\fP, \fBCUT_BUFFER0\fP) \en\e
+ Shift <KeyPress> Insert:\fBinsert\-selection\fP(\fBSELECT\fP, \fBCUT_BUFFER0\fP) \en\e
+ Alt <Key>Return:\fBfullscreen\fP() \en\e
+ <KeyRelease> Scroll_Lock:\fBscroll\-lock\fP() \en\e
+ Shift\(tiCtrl <KeyPress> KP_Add:\fBlarger\-vt\-font() \en\e
+ Shift Ctrl <KeyPress> KP_Add:\fBsmaller\-vt\-font\fP() \en\e
+ Shift <KeyPress> KP_Subtract:\fBsmaller\-vt\-font\fP() \en\e
+ \(tiMeta <KeyPress>:\fBinsert\-seven\-bit() \en\e
+ Meta <KeyPress>:\fBinsert\-eight\-bit\fP() \en\e
+ !Ctrl <Btn1Down>:\fBpopup\-menu\fP(mainMenu) \en\e
+ !Lock Ctrl <Btn1Down>:\fBpopup\-menu\fP(mainMenu) \en\e
+!Lock Ctrl @Num_Lock <Btn1Down>:\fBpopup\-menu\fP(mainMenu) \en\e
+ ! @Num_Lock Ctrl <Btn1Down>:\fBpopup\-menu\fP(mainMenu) \en\e
+ \(tiMeta <Btn1Down>:\fBselect\-start() \en\e
+ \(tiMeta <Btn1Motion>:\fBselect\-extend() \en\e
+ !Ctrl <Btn2Down>:\fBpopup\-menu\fP(vtMenu) \en\e
+ !Lock Ctrl <Btn2Down>:\fBpopup\-menu\fP(vtMenu) \en\e
+!Lock Ctrl @Num_Lock <Btn2Down>:\fBpopup\-menu\fP(vtMenu) \en\e
+ ! @Num_Lock Ctrl <Btn2Down>:\fBpopup\-menu\fP(vtMenu) \en\e
+ \(tiCtrl \(tiMeta <Btn2Down>:\fBignore() \en\e
+ Meta <Btn2Down>:\fBclear\-saved\-lines\fP() \en\e
+ \(tiCtrl \(tiMeta <Btn2Up>:\fBinsert\-selection(\fBSELECT\fP, \fBCUT_BUFFER0\fP) \en\e
+ !Ctrl <Btn3Down>:\fBpopup\-menu\fP(fontMenu) \en\e
+ !Lock Ctrl <Btn3Down>:\fBpopup\-menu\fP(fontMenu) \en\e
+!Lock Ctrl @Num_Lock <Btn3Down>:\fBpopup\-menu\fP(fontMenu) \en\e
+ ! @Num_Lock Ctrl <Btn3Down>:\fBpopup\-menu\fP(fontMenu) \en\e
+ \(tiCtrl \(tiMeta <Btn3Down>:\fBstart\-extend() \en\e
+ \(tiMeta <Btn3Motion>:\fBselect\-extend() \en\e
+ Ctrl <Btn4Down>:\fBscroll\-back\fP(1,halfpage,m) \en\e
+ Lock Ctrl <Btn4Down>:\fBscroll\-back\fP(1,halfpage,m) \en\e
+ Lock @Num_Lock Ctrl <Btn4Down>:\fBscroll\-back\fP(1,halfpage,m) \en\e
+ @Num_Lock Ctrl <Btn4Down>:\fBscroll\-back\fP(1,halfpage,m) \en\e
+ <Btn4Down>:\fBscroll\-back\fP(5,line,m) \en\e
+ Ctrl <Btn5Down>:\fBscroll\-forw\fP(1,halfpage,m) \en\e
+ Lock Ctrl <Btn5Down>:\fBscroll\-forw\fP(1,halfpage,m) \en\e
+ Lock @Num_Lock Ctrl <Btn5Down>:\fBscroll\-forw\fP(1,halfpage,m) \en\e
+ @Num_Lock Ctrl <Btn5Down>:\fBscroll\-forw\fP(1,halfpage,m) \en\e
+ <Btn5Down>:\fBscroll\-forw\fP(5,line,m) \en\e
+ <BtnUp>:\fBselect\-end\fP(\fBSELECT\fP, \fBCUT_BUFFER0\fP) \en\e
+ <BtnDown>:\fBignore\fP()
.NE
.PP
The default bindings in the Tektronix window are analogous but less extensive.
These are for the \fItek4014\fP widget:
.NS
- ~Meta<KeyPress>: \fBinsert-seven-bit\fP() \\n\\\&
- Meta<KeyPress>: \fBinsert-eight-bit\fP() \\n\\\&
- !Ctrl <Btn1Down>: \fBpopup-menu\fP(mainMenu) \\n\\\&
- !Lock Ctrl <Btn1Down>: \fBpopup-menu\fP(mainMenu) \\n\\\&
- !Lock Ctrl @Num_Lock <Btn1Down>: \fBpopup-menu\fP(mainMenu) \\n\\\&
- !Ctrl @Num_Lock <Btn1Down>: \fBpopup-menu\fP(mainMenu) \\n\\\&
- !Ctrl <Btn2Down>: \fBpopup-menu\fP(tekMenu) \\n\\\&
- !Lock Ctrl <Btn2Down>: \fBpopup-menu\fP(tekMenu) \\n\\\&
- !Lock Ctrl @Num_Lock <Btn2Down>: \fBpopup-menu\fP(tekMenu) \\n\\\&
- !Ctrl @Num_Lock <Btn2Down>: \fBpopup-menu\fP(tekMenu) \\n\\\&
- Shift ~Meta<Btn1Down>: \fBgin-press\fP(L) \\n\\\&
- ~Meta<Btn1Down>: \fBgin-press\fP(l) \\n\\\&
- Shift ~Meta<Btn2Down>: \fBgin-press\fP(M) \\n\\\&
- ~Meta<Btn2Down>: \fBgin-press\fP(m) \\n\\\&
- Shift ~Meta<Btn3Down>: \fBgin-press\fP(R) \\n\\\&
- ~Meta<Btn3Down>: \fBgin-press\fP(r)
+ \(tiMeta<KeyPress>: \fBinsert\-seven\-bit() \en\e
+ Meta<KeyPress>: \fBinsert\-eight\-bit\fP() \en\e
+ !Ctrl <Btn1Down>: \fBpopup\-menu\fP(mainMenu) \en\e
+ !Lock Ctrl <Btn1Down>: \fBpopup\-menu\fP(mainMenu) \en\e
+ !Lock Ctrl @Num_Lock <Btn1Down>: \fBpopup\-menu\fP(mainMenu) \en\e
+ !Ctrl @Num_Lock <Btn1Down>: \fBpopup\-menu\fP(mainMenu) \en\e
+ !Ctrl <Btn2Down>: \fBpopup\-menu\fP(tekMenu) \en\e
+ !Lock Ctrl <Btn2Down>: \fBpopup\-menu\fP(tekMenu) \en\e
+ !Lock Ctrl @Num_Lock <Btn2Down>: \fBpopup\-menu\fP(tekMenu) \en\e
+ !Ctrl @Num_Lock <Btn2Down>: \fBpopup\-menu\fP(tekMenu) \en\e
+ Shift \(tiMeta<Btn1Down>: \fBgin\-press(L) \en\e
+ \(tiMeta<Btn1Down>: \fBgin\-press(l) \en\e
+ Shift \(tiMeta<Btn2Down>: \fBgin\-press(M) \en\e
+ \(tiMeta<Btn2Down>: \fBgin\-press(m) \en\e
+ Shift \(tiMeta<Btn3Down>: \fBgin\-press(R) \en\e
+ \(tiMeta<Btn3Down>: \fBgin\-press(r)
.NE
.SS Custom Key Bindings
.PP
@@ -6979,11 +6985,11 @@
When it loses the selection, it removes the corresponding highlight.
But you can still paste from the corresponding cut buffer.
.NS
-*VT100*translations: #override \\n\\\&
- ~Shift~Ctrl<Btn2Up>: \fBinsert-selection\fP(\fBPRIMARY\fP, CUT_BUFFER0) \\n\\\&
- Shift~Ctrl<Btn2Up>: \fBinsert-selection\fP(\fBCLIPBOARD\fP, CUT_BUFFER1) \\n\\\&
- ~Shift <BtnUp> : \fBselect-end\fP(\fBPRIMARY\fP, CUT_BUFFER0) \\n\\\&
- Shift <BtnUp> : \fBselect-end\fP(\fBCLIPBOARD\fP, CUT_BUFFER1)
+*VT100*translations: \fB #override \en\e
+ \(tiShift\(tiCtrl<Btn2Up>: \fBinsert\-selection\fP(\fBPRIMARY\fP, \fBCUT_BUFFER0\fP) \en\e
+ Shift\(tiCtrl<Btn2Up>: \fBinsert\-selection\fP(\fBCLIPBOARD\fP, \fBCUT_BUFFER1\fP) \en\e
+ \(tiShift <BtnUp> : \fBselect\-end\fP(\fBPRIMARY\fP, \fBCUT_BUFFER0\fP) \en\e
+ Shift <BtnUp> : \fBselect\-end\fP(\fBCLIPBOARD\fP, \fBCUT_BUFFER1\fP)
.NE
.PP
In the example, the class name \fBVT100\fP is used rather than the widget name.
@@ -6994,17 +7000,17 @@
.PP
Not everyone finds the three-button mouse bindings easy to use.
In a wheel mouse, the middle button might be the wheel.
-As an alternative, you could add a binding shifted keys:
+As an alternative, you could add a binding to shifted keys:
.NS
-*VT100*translations: #override \\n\\
- Shift <Key>Home: \fBcopy-selection\fP(\fBSELECT\fP) \\n\\
- Shift <Key>Insert: \fBcopy-selection\fP(\fBSELECT\fP) \\n\\
- Ctrl Shift <Key>C: \fBcopy-selection\fP(\fBSELECT\fP) \\n\\
- Ctrl Shift <Key>V: \fBinsert-selection\fP(\fBSELECT\fP)
+*VT100*translations: \fB#override \en\e
+ Shift <Key>Home: \fBcopy\-selection\fP(\fBSELECT\fP) \en\e
+ Shift <Key>Insert: \fBcopy\-selection\fP(\fBSELECT\fP) \en\e
+ Ctrl Shift <Key>C: \fBcopy\-selection\fP(\fBSELECT\fP) \en\e
+ Ctrl Shift <Key>V: \fBinsert\-selection\fP(\fBSELECT\fP)
.NE
.PP
You would still use the left- and right-mouse buttons (typically 1 and 3)
-for beginning and extending selections.
+for beginning and extending selections.
.PP
Besides mouse problems, there are also keyboards with inconvenient layouts.
Some lack a numeric keypad, making it hard to use the shifted keypad plus
@@ -7012,9 +7018,9 @@
You can work around that by assigning the actions to more readily accessed
keys:
.NS
-*VT100*translations: #override \\n\\
- Ctrl <Key> +: \fBlarger-vt-font\fP() \\n\\
- Ctrl <Key> -: \fBsmaller-vt-font\fP()
+*VT100*translations: #override \en\e
+ Ctrl <Key> +: \fBlarger\-vt\-font\fP() \en\e
+ Ctrl <Key> \-: \fBsmaller\-vt\-font\fP()
.NE
.PP
The keymap feature allows you to switch between sets of translations.
@@ -7023,16 +7029,16 @@
keys for entering commonly-typed words:
.NS
*VT100.Translations: #override <Key>F13: keymap(dbx)
-*VT100.dbxKeymap.translations: \\\&
- <Key>F14: \fBkeymap\fP(None) \\n\\\&
- <Key>F17: \fBstring\fP("next") \\n\\
- \fBstring\fP(0x0d) \\n\\\&
- <Key>F18: \fBstring\fP("step") \\n\\
- \fBstring\fP(0x0d) \\n\\\&
- <Key>F19: \fBstring\fP("continue") \\n\\
- \fBstring\fP(0x0d) \\n\\\&
- <Key>F20: \fBstring\fP("print ") \\n\\
- \fBinsert-selection\fP(\fBPRIMARY\fP, CUT_BUFFER0)
+*VT100.dbxKeymap.translations: \fB\e
+ <Key>F14: \fBkeymap\fP(None) \en\e
+ <Key>F17: \fBstring\fP("next") \en\e
+ \fBstring\fP(0x0d) \en\e
+ <Key>F18: \fBstring\fP("step") \en\e
+ \fBstring\fP(0x0d) \en\e
+ <Key>F19: \fBstring\fP("continue") \en\e
+ \fBstring\fP(0x0d) \en\e
+ <Key>F20: \fBstring\fP("print ") \en\e
+ \fBinsert\-selection\fP(\fBPRIMARY\fP, \fBCUT_BUFFER0\fP)
.NE
.SS Default Scrollbar Bindings
.PP
@@ -7051,12 +7057,12 @@
.PP
The default bindings for the scrollbar widget use only mouse-button events:
.NS
- <Btn5Down>: StartScroll(Forward) \\n\\\&
- <Btn1Down>: StartScroll(Forward) \\n\\\&
- <Btn2Down>: StartScroll(Continuous) MoveThumb() NotifyThumb() \\n\\\&
- <Btn3Down>: StartScroll(Backward) \\n\\\&
- <Btn4Down>: StartScroll(Backward) \\n\\\&
- <Btn2Motion>: MoveThumb() NotifyThumb() \\n\\\&
+ <Btn5Down>: StartScroll(Forward) \en\e
+ <Btn1Down>: StartScroll(Forward) \en\e
+ <Btn2Down>: StartScroll(Continuous) MoveThumb() NotifyThumb() \en\e
+ <Btn3Down>: StartScroll(Backward) \en\e
+ <Btn4Down>: StartScroll(Backward) \en\e
+ <Btn2Motion>: MoveThumb() NotifyThumb() \en\e
<BtnUp>: NotifyScroll(Proportional) EndScroll()
.NE
.PP
@@ -7089,11 +7095,11 @@
for dragging the scrollbar thumb.
That can be set up by altering the translations resource, e.g.,
.NS
-*VT100.scrollbar.translations: #override \\n\\\&
- <Btn5Down>: StartScroll(Forward) \\n\\\&
- <Btn1Down>: StartScroll(Continuous) MoveThumb() NotifyThumb() \\n\\\&
- <Btn4Down>: StartScroll(Backward) \\n\\\&
- <Btn1Motion>: MoveThumb() NotifyThumb() \\n\\\&
+*VT100.scrollbar.translations: #override \en\e
+ <Btn5Down>: StartScroll(Forward) \en\e
+ <Btn1Down>: StartScroll(Continuous) MoveThumb() NotifyThumb() \en\e
+ <Btn4Down>: StartScroll(Backward) \en\e
+ <Btn1Motion>: MoveThumb() NotifyThumb() \en\e
<BtnUp>: NotifyScroll(Proportional) EndScroll()
.NE
.SH "CONTROL SEQUENCES AND KEYBOARD"
@@ -7150,31 +7156,31 @@
.SS Window and Icon Titles
.PP
Some scripts use \fBecho\fP with options \fB\-e\fP and \fB\-n\fP to tell
-the shell to interpret the string \*(``\\e\*('' as the \fIescape\fP character and
+the shell to interpret the string \*(``\ee\*('' as the \fIescape\fP character and
to suppress a trailing newline on output.
-Those are not portable, not recommended.
+Those are not portable, nor recommended.
Instead, use \fBprintf\fP (POSIX).
.PP
For example, to set the \fIwindow title\fP to \*(``Hello world!\*('',
you could use one of these commands in a script:
.NS
-printf '\\033]2;Hello world!\\033\\'
-printf '\\033]2;Hello world!\\007'
-printf '\\033]2;%s\\033\\' "Hello world!"
-printf '\\033]2;%s\\007' "Hello world!"
+printf \*(AQ\e033]2;Hello world!\e033\e\*(AQ
+printf \*(AQ\e033]2;Hello world!\e007\*(AQ
+printf \*(AQ\e033]2;%s\e033\e\*(AQ "Hello world!"
+printf \*(AQ\e033]2;%s\e007\*(AQ "Hello world!"
.NE
.PP
-The \fBprintf\fP command interprets the octal value \*(``\\033\*('' for
+The \fBprintf\fP command interprets the octal value \*(``\e033\*('' for
\fIescape\fP, and (since it was not given in the format) omits a trailing
newline from the output.
.PP
Some programs (such as \fBscreen\fP(1)) set both window- and icon-titles
at the same time, using a slightly different control sequence:
.NS
-printf '\\033]0;Hello world!\\033\\'
-printf '\\033]0;Hello world!\\007'
-printf '\\033]0;%s\\033\\' "Hello world!"
-printf '\\033]0;%s\\007' "Hello world!"
+printf \*(AQ\e033]0;Hello world!\e033\e\*(AQ
+printf \*(AQ\e033]0;Hello world!\e007\*(AQ
+printf \*(AQ\e033]0;%s\e033\e\*(AQ "Hello world!"
+printf \*(AQ\e033]0;%s\e007\*(AQ "Hello world!"
.NE
.PP
The difference is the \fIparameter\fP \*(``0\*('' in each command.
@@ -7183,10 +7189,10 @@
You can tell \fI\*n\fP to ask for this with a different parameter
in the control sequence:
.NS
-printf '\\033]1;Hello world!\\033\\'
-printf '\\033]1;Hello world!\\007'
-printf '\\033]1;%s\\033\\' "Hello world!"
-printf '\\033]1;%s\\007' "Hello world!"
+printf \*(AQ\e033]1;Hello world!\e033\e\*(AQ
+printf \*(AQ\e033]1;Hello world!\e007\*(AQ
+printf \*(AQ\e033]1;%s\e033\e\*(AQ "Hello world!"
+printf \*(AQ\e033]1;%s\e007\*(AQ "Hello world!"
.NE
.
.SS Special Keys
@@ -7195,13 +7201,13 @@
has two modes for the \fIspecial keys\fP (cursor-keys, numeric keypad,
and certain function-keys):
.bP
-\fInormal mode\fP, which makes the special keys transmit
+\fInormal mode\fP, which makes the special keys transmit
\*(``useful\*('' sequences such as the control sequence for cursor-up
when pressing the up-arrow, and
.bP
\fIapplication mode\fP,
which uses a different control sequence that cannot be mistaken for
-the
+the
\*(``useful\*('' sequences.
.PP
The main difference between the two modes is that normal mode sequences
@@ -7242,9 +7248,9 @@
normal or application mode initially.
Here is an example:
.NS
-[[ "$terminfo[kcuu1]" == "^[O"* ]] && \\
-bindkey -M viins "${terminfo[kcuu1]/O/[}" \\
-vi-up-line-or-history
+[[ "$terminfo[kcuu1]" == "\(ha[O"* ]] && \e
+bindkey \-M viins "${terminfo[kcuu1]/O/[}" \e
+vi\-up\-line\-or\-history
.NE
.
.
@@ -7259,12 +7265,12 @@
Because there is no guidance in the POSIX standard, each shell addresses
the problem in a different way:
.bP
-\fBbash\fP treats characters within
-\*(``\\[\*('' and
-\*(``\\]\*(''
+\fBbash\fP treats characters within
+\*(``\e[\*('' and
+\*(``\e]\*(''
as nonprinting (using no width on the screen).
.bP
-\fBzsh\fP treats characters within
+\fBzsh\fP treats characters within
\*(``%{\*('' and
\*(``%}\*(''
as nonprinting.
@@ -7681,11 +7687,11 @@
\fIXterm Control Sequences\fP
(this is the file ctlseqs.ms).
.sp
-http://invisible-island.net/xterm/xterm.html
+http://invisible\-island.net/xterm/xterm.html
.br
-http://invisible-island.net/xterm/ctlseqs/ctlseqs.html
+http://invisible\-island.net/xterm/ctlseqs/ctlseqs.html
.br
-http://invisible-island.net/xterm/xterm.faq.html
+http://invisible\-island.net/xterm/xterm.faq.html
.
.
.SH AUTHORS
Attachment:
signature.asc
Description: PGP signature