Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20161206-1
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
After upgrading to sid, GDM was not able to start. The boot process stopped
with the message:
```
[FAILED] Failed to start User Manager for UID 117.
See 'systemctl status user@117.service' for details.
```
The output of the recommented command was not very useful, though. Neither was
`journalct -xb`.
I managed to get a shell by starting in recovery mode and installed lightdm.
This time, the error was easier to find in the Xorg logs. Unfortunatelly I
didn't copy the contents of the file, but the relevant lines were:
```
(WW) glamor0: Failed to get GLSL version
(EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
```
If it is really important, I can try to reproduce the error again and copy the
logs.
I managed to work around this issue by creating a new xorg.conf file, disabling
acceleration:
```
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "NoAccel" "True"
EndSection
```
With that, the computer booted up fine using lightdm and I could use it again.
I didn't confirm if GDM is working, but lightdm and slim are, for sure.
Please let me know if there's any other information I can give to help track
this down.
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 105 Oct 5 00:41 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "NoAccel" "True"
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org ) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.13.4-1 (2017-10-01)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 amieiro amieiro 151197 Oct 4 21:08 /home/amieiro/.local/share/xorg/Xorg.0.log
-rw-r--r-- 1 root root 24583 Oct 5 00:48 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
------------------------------------------------------------ ---------
[ 56.352]
X.Org X Server 1.19.3
Release Date: 2017-03-15
[ 56.428] X Protocol Version 11, Revision 0
[ 56.428] Build Operating System: Linux 4.9.0-3-amd64 x86_64 Debian
[ 56.428] Current Operating System: Linux stallman 4.13.0-1-amd64 #1 SMP Debian 4.13.4-1 (2017-10-01) x86_64
[ 56.428] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=/dev/mapper/stallman--vg- root ro quiet
[ 56.428] Build Date: 07 July 2017 06:22:09AM
[ 56.428] xorg-server 2:1.19.3-2 (https://www.debian.org/support )
[ 56.428] Current version of pixman: 0.34.0
[ 56.428] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 56.428] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 56.429] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 5 00:44:57 2017
[ 56.824] (==) Using config file: "/etc/X11/xorg.conf"
[ 56.824] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 57.100] (==) No Layout section. Using the first Screen section.
[ 57.100] (==) No screen section available. Using defaults.
[ 57.100] (**) |-->Screen "Default Screen Section" (0)
[ 57.100] (**) | |-->Monitor "<default monitor>"
[ 57.108] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 57.108] (**) | |-->Device "Intel Graphics"
[ 57.108] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 57.108] (==) Automatically adding devices
[ 57.108] (==) Automatically enabling devices
[ 57.108] (==) Automatically adding GPU devices
[ 57.108] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 57.215] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 57.224] Entry deleted from font path.
[ 57.534] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 57.550] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 57.550] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 57.550] (II) Loader magic: 0x5648e8e80e00
[ 57.550] (II) Module ABI versions:
[ 57.550] X.Org ANSI C Emulation: 0.4
[ 57.550] X.Org Video Driver: 23.0
[ 57.550] X.Org XInput driver : 24.1
[ 57.550] X.Org Server Extension : 10.0
[ 57.551] (--) using VT number 2
[ 57.551] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 57.552] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 57.560] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3977 rev 9, Mem @ 0xe0000000/4194304, 0xd0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 57.560] (II) LoadModule: "glx"
[ 57.812] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 58.107] (II) Module glx: vendor="X.Org Foundation"
[ 58.107] compiled for 1.19.3, module version = 1.0.0
[ 58.107] ABI class: X.Org Server Extension, version 10.0
[ 58.107] (II) LoadModule: "intel"
[ 58.210] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 58.249] (II) Module intel: vendor="X.Org Foundation"
[ 58.249] compiled for 1.19.0, module version = 2.99.917
[ 58.249] Module class: X.Org Video Driver
[ 58.249] ABI class: X.Org Video Driver, version 23.0
[ 58.249] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 58.250] (II) intel: Driver for Intel(R) HD Graphics
[ 58.250] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 58.250] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 58.316] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170619
[ 58.316] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 58.316] (II) intel(0): SNA compiled for use with valgrind
[ 58.319] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 58.319] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[ 58.319] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 58.319] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 58.319] (==) intel(0): RGB weight 888
[ 58.319] (==) intel(0): Default visual is TrueColor
[ 58.319] (**) intel(0): Option "NoAccel" "True"
[ 58.320] (II) intel(0): Output LVDS1 has no monitor section
[ 58.320] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 58.320] (II) intel(0): Enabled output LVDS1
[ 58.320] (II) intel(0): Output VGA1 has no monitor section
[ 58.320] (II) intel(0): Enabled output VGA1
[ 58.320] (II) intel(0): Output HDMI1 has no monitor section
[ 58.321] (II) intel(0): Enabled output HDMI1
[ 58.321] (II) intel(0): Output DP1 has no monitor section
[ 58.321] (II) intel(0): Enabled output DP1
[ 58.321] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 58.321] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 58.321] (II) intel(0): Enabled output VIRTUAL1
[ 58.321] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 58.321] (==) intel(0): TearFree disabled
[ 58.321] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 58.321] (==) intel(0): DPI set to (96, 96)
[ 58.321] (II) Loading sub module "dri3"
[ 58.321] (II) LoadModule: "dri3"
[ 58.321] (II) Module "dri3" already built-in
[ 58.321] (II) Loading sub module "dri2"
[ 58.321] (II) LoadModule: "dri2"
[ 58.321] (II) Module "dri2" already built-in
[ 58.321] (II) Loading sub module "present"
[ 58.321] (II) LoadModule: "present"
[ 58.321] (II) Module "present" already built-in
[ 58.321] (==) Depth 24 pixmap format is 32 bpp
[ 58.335] (II) intel(0): SNA initialized with disabled backend
[ 58.335] (==) intel(0): Backing store enabled
[ 58.335] (==) intel(0): Silken mouse enabled
[ 58.336] (II) intel(0): HW Cursor enabled
[ 58.336] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 58.338] (==) intel(0): DPMS enabled
[ 58.338] (==) intel(0): Display hotplug detection enabled
[ 58.338] (II) intel(0): Textured video not supported on this hardware or backend
[ 58.339] (WW) intel(0): loading DRI2 whilst acceleration is disabled.
[ 58.339] (II) intel(0): [DRI2] Setup complete
[ 58.339] (II) intel(0): [DRI2] DRI driver: i965
[ 58.339] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 58.339] (II) intel(0): direct rendering: DRI2 enabled
[ 58.339] (II) intel(0): hardware support for Present enabled
[ 58.339] (--) RandR disabled
[ 58.347] (II) SELinux: Disabled on system
[ 58.501] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/i965_dri.so failed (/usr/lib/x86_64-linux-gnu/ dri/i965_dri.so: undefined symbol: _glapi_tls_Dispatch)
[ 58.501] (EE) AIGLX: reverting to software rendering
[ 60.333] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/ dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)
[ 60.333] (EE) GLX: could not load software renderer
[ 60.333] (II) GLX: no usable GL providers found for screen 0
[ 60.345] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 60.356] (II) intel(0): Setting screen physical size to 361 x 203
[ 61.980] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 61.980] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 61.980] (II) LoadModule: "libinput"
[ 61.980] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 62.235] (II) Module libinput: vendor="X.Org Foundation"
[ 62.235] compiled for 1.19.3, module version = 0.26.0
[ 62.235] Module class: X.Org XInput Driver
[ 62.235] ABI class: X.Org XInput driver, version 24.1
[ 62.235] (II) Using input driver 'libinput' for 'Power Button'
[ 62.235] (**) Power Button: always reports core events
[ 62.235] (**) Option "Device" "/dev/input/event7"
[ 62.235] (**) Option "_source" "server/udev"
[ 62.236] (II) event7 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 62.236] (II) event7 - (II) Power Button: (II) device is a keyboard
[ 62.236] (II) event7 - (II) Power Button: (II) device removed
[ 62.252] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/ event7"
[ 62.252] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 62.252] (**) Option "xkb_model" "pc105"
[ 62.252] (**) Option "xkb_layout" "br"
[ 62.362] (II) event7 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 62.362] (II) event7 - (II) Power Button: (II) device is a keyboard
[ 62.362] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 62.362] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 62.362] (II) Using input driver 'libinput' for 'Video Bus'
[ 62.362] (**) Video Bus: always reports core events
[ 62.362] (**) Option "Device" "/dev/input/event11"
[ 62.362] (**) Option "_source" "server/udev"
[ 62.363] (II) event11 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 62.363] (II) event11 - (II) Video Bus: (II) device is a keyboard
[ 62.363] (II) event11 - (II) Video Bus: (II) device removed
[ 62.404] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/ LNXVIDEO:02/input/input12/ event11"
[ 62.404] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 62.404] (**) Option "xkb_model" "pc105"
[ 62.404] (**) Option "xkb_layout" "br"
[ 62.405] (II) event11 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 62.405] (II) event11 - (II) Video Bus: (II) device is a keyboard
[ 62.405] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 62.405] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 62.405] (II) Using input driver 'libinput' for 'Power Button'
[ 62.405] (**) Power Button: always reports core events
[ 62.406] (**) Option "Device" "/dev/input/event5"
[ 62.406] (**) Option "_source" "server/udev"
[ 62.406] (II) event5 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 62.406] (II) event5 - (II) Power Button: (II) device is a keyboard
[ 62.406] (II) event5 - (II) Power Button: (II) device removed
[ 62.444] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/ device:01/PNP0C0C:00/input/ input6/event5"
[ 62.444] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 62.444] (**) Option "xkb_model" "pc105"
[ 62.444] (**) Option "xkb_layout" "br"
[ 62.445] (II) event5 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 62.445] (II) event5 - (II) Power Button: (II) device is a keyboard
[ 62.446] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 62.446] (II) No input driver specified, ignoring this device.
[ 62.446] (II) This device may have been added with another device file.
[ 62.447] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event10)
[ 62.447] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[ 62.447] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[ 62.447] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[ 62.447] (**) Option "Device" "/dev/input/event10"
[ 62.447] (**) Option "_source" "server/udev"
[ 62.448] (II) event10 - (II) Lenovo EasyCamera: Lenovo EasyC: (II) is tagged by udev as: Keyboard
[ 62.448] (II) event10 - (II) Lenovo EasyCamera: Lenovo EasyC: (II) device is a keyboard
[ 62.448] (II) event10 - (II) Lenovo EasyCamera: Lenovo EasyC: (II) device removed
[ 62.500] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/ input/input11/event10"
[ 62.500] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 9)
[ 62.500] (**) Option "xkb_model" "pc105"
[ 62.500] (**) Option "xkb_layout" "br"
[ 62.500] (II) event10 - (II) Lenovo EasyCamera: Lenovo EasyC: (II) is tagged by udev as: Keyboard
[ 62.500] (II) event10 - (II) Lenovo EasyCamera: Lenovo EasyC: (II) device is a keyboard
[ 62.501] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/event1)
[ 62.501] (**) Microsoft Microsoft Nano Transceiver 1.1: Applying InputClass "libinput keyboard catchall"
[ 62.501] (II) Using input driver 'libinput' for 'Microsoft Microsoft Nano Transceiver 1.1'
[ 62.501] (**) Microsoft Microsoft Nano Transceiver 1.1: always reports core events
[ 62.501] (**) Option "Device" "/dev/input/event1"
[ 62.501] (**) Option "_source" "server/udev"
[ 62.501] (II) event1 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) is tagged by udev as: Keyboard
[ 62.501] (II) event1 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device is a keyboard
[ 62.501] (II) event1 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device removed
[ 62.524] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.0/0003:045E:07FD.0001/ input/input3/event1"
[ 62.524] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver 1.1" (type: KEYBOARD, id 10)
[ 62.524] (**) Option "xkb_model" "pc105"
[ 62.524] (**) Option "xkb_layout" "br"
[ 62.525] (II) event1 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) is tagged by udev as: Keyboard
[ 62.525] (II) event1 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device is a keyboard
[ 62.525] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/event2)
[ 62.525] (**) Microsoft Microsoft Nano Transceiver 1.1: Applying InputClass "libinput keyboard catchall"
[ 62.525] (II) Using input driver 'libinput' for 'Microsoft Microsoft Nano Transceiver 1.1'
[ 62.525] (**) Microsoft Microsoft Nano Transceiver 1.1: always reports core events
[ 62.525] (**) Option "Device" "/dev/input/event2"
[ 62.525] (**) Option "_source" "server/udev"
[ 62.526] (II) event2 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) is tagged by udev as: Keyboard
[ 62.526] (II) event2 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device is a keyboard
[ 62.526] (II) event2 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device removed
[ 62.556] (II) libinput: Microsoft Microsoft Nano Transceiver 1.1: needs a virtual subdevice
[ 62.556] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.1/0003:045E:07FD.0002/ input/input4/event2"
[ 62.556] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver 1.1" (type: MOUSE, id 11)
[ 62.556] (**) Option "AccelerationScheme" "none"
[ 62.556] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) selected scheme none/0
[ 62.556] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration factor: 2.000
[ 62.556] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration threshold: 4
[ 62.556] (II) event2 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) is tagged by udev as: Keyboard
[ 62.556] (II) event2 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device is a keyboard
[ 62.557] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/event3)
[ 62.557] (**) Microsoft Microsoft Nano Transceiver 1.1: Applying InputClass "libinput pointer catchall"
[ 62.557] (II) Using input driver 'libinput' for 'Microsoft Microsoft Nano Transceiver 1.1'
[ 62.557] (**) Microsoft Microsoft Nano Transceiver 1.1: always reports core events
[ 62.557] (**) Option "Device" "/dev/input/event3"
[ 62.557] (**) Option "_source" "server/udev"
[ 62.616] (II) event3 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) is tagged by udev as: Mouse
[ 62.616] (II) event3 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device is a pointer
[ 62.616] (II) event3 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device removed
[ 62.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.2/0003:045E:07FD.0003/ input/input5/event3"
[ 62.660] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver 1.1" (type: MOUSE, id 12)
[ 62.660] (**) Option "AccelerationScheme" "none"
[ 62.660] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) selected scheme none/0
[ 62.660] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration factor: 2.000
[ 62.660] (**) Microsoft Microsoft Nano Transceiver 1.1: (accel) acceleration threshold: 4
[ 62.720] (II) event3 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) is tagged by udev as: Mouse
[ 62.720] (II) event3 - (II) Microsoft Microsoft Nano Transceiver 1.1: (II) device is a pointer
[ 62.721] (II) config/udev: Adding input device Microsoft Microsoft Nano Transceiver 1.1 (/dev/input/mouse0)
[ 62.721] (II) No input driver specified, ignoring this device.
[ 62.721] (II) This device may have been added with another device file.
[ 62.721] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 62.721] (II) No input driver specified, ignoring this device.
[ 62.722] (II) This device may have been added with another device file.
[ 62.722] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 62.722] (II) No input driver specified, ignoring this device.
[ 62.722] (II) This device may have been added with another device file.
[ 62.722] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 62.722] (II) No input driver specified, ignoring this device.
[ 62.722] (II) This device may have been added with another device file.
[ 62.723] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 62.723] (II) No input driver specified, ignoring this device.
[ 62.723] (II) This device may have been added with another device file.
[ 62.723] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event9)
[ 62.724] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 62.724] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 62.724] (**) Ideapad extra buttons: always reports core events
[ 62.724] (**) Option "Device" "/dev/input/event9"
[ 62.724] (**) Option "_source" "server/udev"
[ 62.724] (II) event9 - (II) Ideapad extra buttons: (II) is tagged by udev as: Keyboard
[ 62.724] (II) event9 - (II) Ideapad extra buttons: (II) device is a keyboard
[ 62.724] (II) event9 - (II) Ideapad extra buttons: (II) device removed
[ 62.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/ VPC2004:00/input/input10/ event9"
[ 62.776] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 13)
[ 62.776] (**) Option "xkb_model" "pc105"
[ 62.776] (**) Option "xkb_layout" "br"
[ 62.776] (II) event9 - (II) Ideapad extra buttons: (II) is tagged by udev as: Keyboard
[ 62.776] (II) event9 - (II) Ideapad extra buttons: (II) device is a keyboard
[ 62.776] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 62.776] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 62.776] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 62.776] (**) AT Translated Set 2 keyboard: always reports core events
[ 62.776] (**) Option "Device" "/dev/input/event0"
[ 62.776] (**) Option "_source" "server/udev"
[ 62.777] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 62.777] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 62.777] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 62.800] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/ event0"
[ 62.800] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 62.800] (**) Option "xkb_model" "pc105"
[ 62.800] (**) Option "xkb_layout" "br"
[ 62.800] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 62.800] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 62.801] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 62.801] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 62.801] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 62.801] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 62.801] (**) Option "Device" "/dev/input/event4"
[ 62.801] (**) Option "_source" "server/udev"
[ 62.801] (II) event4 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 62.801] (II) event4 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 62.801] (II) event4 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[ 62.856] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/ event4"
[ 62.856] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 62.856] (**) Option "AccelerationScheme" "none"
[ 62.856] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 62.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 62.856] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 62.857] (II) event4 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 62.857] (II) event4 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 62.858] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 62.858] (II) No input driver specified, ignoring this device.
[ 62.858] (II) This device may have been added with another device file.
[ 62.858] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 62.858] (II) No input driver specified, ignoring this device.
[ 62.858] (II) This device may have been added with another device file.
[ 62.953] (**) Microsoft Microsoft Nano Transceiver 1.1: Applying InputClass "libinput keyboard catchall"
[ 62.954] (II) Using input driver 'libinput' for 'Microsoft Microsoft Nano Transceiver 1.1'
[ 62.954] (**) Microsoft Microsoft Nano Transceiver 1.1: always reports core events
[ 62.954] (**) Option "Device" "/dev/input/event2"
[ 62.954] (**) Option "_source" "_driver/libinput"
[ 62.954] (II) libinput: Microsoft Microsoft Nano Transceiver 1.1: is a virtual subdevice
[ 62.954] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.1/0003:045E:07FD.0002/ input/input4/event2"
[ 62.954] (II) XINPUT: Adding extended input device "Microsoft Microsoft Nano Transceiver 1.1" (type: KEYBOARD, id 16)
[ 62.954] (**) Option "xkb_model" "pc105"
[ 62.954] (**) Option "xkb_layout" "br"
[ 62.954] (II) intel(0): EDID vendor "CMN", prod id 5265
[ 62.954] (II) intel(0): Printing DDC gathered Modelines:
[ 62.954] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
[ 243.433] (II) Axis 0x1 value 241 is outside expected range [765, 5270]
See https://wayland.freedesktop.org/libinput/doc/1.8.2// for detailsabsolute_coordinate_ranges. html
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74, ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=39311650
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/ event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43550907
E: XKBLAYOUT=br
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/ input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/ LNXVIDEO:02/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_02
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:02
E: ID_PATH_TAG=acpi-LNXVIDEO_02
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0, E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=40727875
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/ input/input12/event11
N: input/event11
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/ LNXVIDEO:02/input/input12/ event11
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:02
E: ID_PATH_TAG=acpi-LNXVIDEO_02
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43550615
E: XKBLAYOUT=br
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/ PNP0C0C:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device: 01/PNP0C0C:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74, ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=39309277
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/ PNP0C0C:00/input/input6/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device: 01/PNP0C0C:00/input/input6/ event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:PNP0C0C/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43550698
E: XKBLAYOUT=br
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/ input7
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5, kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=39311011
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7/ event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/ input7/event6
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=reliable
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43551316
P: /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/ input11
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/ input/input11
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_4_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Lenovo_EasyCamera
E: ID_MODEL_ENC=Lenovo\x20EasyCamera
E: ID_MODEL_ID=5728
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=0013
E: ID_SERIAL=CINE150GM_Lenovo_EasyCamera_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CINE150GM
E: ID_VENDOR_ENC=CINE150GM
E: ID_VENDOR_ID=0bda
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v0BDAp5728e0013-e0,1,kD4, ramlsfw
E: NAME="Lenovo EasyCamera: Lenovo EasyC"
E: PHYS="usb-0000:00:14.0-4/button"
E: PRODUCT=3/bda/5728/13
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=40430696
P: /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/ input11/event10
N: input/event10
S: input/by-id/usb-CINE150GM_Lenovo_EasyCamera_ 200901010001-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.0- event /dev/input/by-id/usb- CINE150GM_Lenovo_EasyCamera_ 200901010001-event-if00
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/ input/input11/event10
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Lenovo_EasyCamera
E: ID_MODEL_ENC=Lenovo\x20EasyCamera
E: ID_MODEL_ID=5728
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=0013
E: ID_SERIAL=CINE150GM_Lenovo_EasyCamera_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CINE150GM
E: ID_VENDOR_ENC=CINE150GM
E: ID_VENDOR_ID=0bda
E: LIBINPUT_DEVICE_GROUP=3/bda/5728/13:usb-0000:00:14.0-4/ button
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43551059
E: XKBLAYOUT=br
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/ 0003:045E:07FD.0001/input/ input3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.0/0003:045E:07FD.0001/ input/input3
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Microsoft_Nano_Transceiver_1.1
E: ID_MODEL_ENC=Microsoft\x20Nano\x20Transceiver\x201.1
E: ID_MODEL_ID=07fd
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0315
E: ID_SERIAL=Microsoft_Microsoft_Nano_Transceiver_1.1
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0003v045Ep07FDe0111-e0,1,4, 11,14,k71,72,73,74,75,77,79, 7A,7B,7C,7D,7E,7F,80,81,82,83, 84,85,86,87,88,89,8A,8C,8E,96, 98,9E,9F,A1,A3,A4,A5,A6,AD,B0, B1,B2,B3,B4,B7,B8,B9,BA,BB,BC, BD,BE,BF,C0,C1,C2,F0,ram4,l0, 1,2,sfw
E: MSC=10
E: NAME="Microsoft Microsoft Nano Transceiver 1.1"
E: PHYS="usb-0000:00:1a.0-1.2/input0"
E: PRODUCT=3/45e/7fd/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6990279
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/ 0003:045E:07FD.0001/input/ input3/event1
N: input/event1
S: input/by-id/usb-Microsoft_Microsoft_Nano_Transceiver_1. 1-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft_Nano_ Transceiver_1.1-event-kbd /dev/input/by-path/pci-0000: 00:1a.0-usb-0:1.2:1.0-event- kbd
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.0/0003:045E:07FD.0001/ input/input3/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Microsoft_Nano_Transceiver_1.1
E: ID_MODEL_ENC=Microsoft\x20Nano\x20Transceiver\x201.1
E: ID_MODEL_ID=07fd
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0315
E: ID_SERIAL=Microsoft_Microsoft_Nano_Transceiver_1.1
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: LIBINPUT_DEVICE_GROUP=3/45e/7fd/111:usb-0000:00:1a.0-1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43552621
E: XKBLAYOUT=br
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/ 0003:045E:07FD.0002/input/ input4
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.1/0003:045E:07FD.0002/ input/input4
E: EV=10001f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_2_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Microsoft_Nano_Transceiver_1.1
E: ID_MODEL_ENC=Microsoft\x20Nano\x20Transceiver\x201.1
E: ID_MODEL_ID=07fd
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_1
E: ID_REVISION=0315
E: ID_SERIAL=Microsoft_Microsoft_Nano_Transceiver_1.1
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 1 1130c130b17c000 267bfad941dfed 9e168000004400 10000002
E: MODALIAS=input:b0003v045Ep07FDe0111-e0,1,2,3, 4,14,k71,72,73,74,77,80,82,83, 85,86,87,88,89,8A,8B,8C,8E,8F, 90,96,98,9B,9C,9E,9F,A1,A3,A4, A5,A6,A7,A8,A9,AB,AC,AD,AE,B1, B2,B5,CE,CF,D0,D1,D2,D4,D8,D9, DB,E0,E1,E4,EA,EB,F0,F1,F4,F8, 100,161,162,166,16A,16E,172, 174,176,178,179,17A,17B,17C, 17D,17F,180,182,183,185,188, 189,18C,18D,18E,18F,190,191, 192,193,195,197,198,199,19A, 19C,1A0,1A1,1A2,1A3,1A4,1A5, 1A6,1A7,1A8,1A9,1AA,1AB,1AC, 1AD,1AE,1AF,1B0,1B1,1B7,1BA, 240,241,242,243,244,245,246, 250,251,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Microsoft Microsoft Nano Transceiver 1.1"
E: PHYS="usb-0000:00:1a.0-1.2/input1"
E: PRODUCT=3/45e/7fd/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6990279
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/ 0003:045E:07FD.0002/input/ input4/event2
N: input/event2
S: input/by-id/usb-Microsoft_Microsoft_Nano_Transceiver_1. 1-event-if01
S: input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.2:1. 1-event /dev/input/by-id/usb- Microsoft_Microsoft_Nano_ Transceiver_1.1-event-if01
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.1/0003:045E:07FD.0002/ input/input4/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Microsoft_Nano_Transceiver_1.1
E: ID_MODEL_ENC=Microsoft\x20Nano\x20Transceiver\x201.1
E: ID_MODEL_ID=07fd
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_1
E: ID_REVISION=0315
E: ID_SERIAL=Microsoft_Microsoft_Nano_Transceiver_1.1
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: LIBINPUT_DEVICE_GROUP=3/45e/7fd/111:usb-0000:00:1a.0-1
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43551848
E: XKBLAYOUT=br
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/ 0003:045E:07FD.0003/input/ input5
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.2/0003:045E:07FD.0003/ input/input5
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_2_1_2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_Nano_Transceiver_1.1
E: ID_MODEL_ENC=Microsoft\x20Nano\x20Transceiver\x201.1
E: ID_MODEL_ID=07fd
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_2
E: ID_REVISION=0315
E: ID_SERIAL=Microsoft_Microsoft_Nano_Transceiver_1.1
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:030102:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: KEY=1f0000 0 0 0 0
E: MODALIAS=input:b0003v045Ep07FDe0111-e0,1,2,4, k110,111,112,113,114,r0,1,8, am4,lsfw
E: MSC=10
E: NAME="Microsoft Microsoft Nano Transceiver 1.1"
E: PHYS="usb-0000:00:1a.0-1.2/input2"
E: PRODUCT=3/45e/7fd/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=6990027
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/ 0003:045E:07FD.0003/input/ input5/event3
N: input/event3
S: input/by-id/usb-Microsoft_Microsoft_Nano_Transceiver_1. 1-if02-event-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.2-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.2:1. 2-event-mouse /dev/input/by-id/usb- Microsoft_Microsoft_Nano_ Transceiver_1.1-if02-event- mouse
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1- 1.2:1.2/0003:045E:07FD.0003/ input/input5/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_Nano_Transceiver_1.1