Bug#866031: xserver-xorg-input-synaptics: Breaks xserver-xorg-input-libinput on jessie → stretch upgrade
Package: xserver-xorg-input-synaptics
Version: 1.9.0-1+b1
Severity: normal
Tags: l10n
Dear Maintainer,
I've just upgraded from jessie to stretch on a laptop with a "SynPS/2 Synaptics
TouchPad" (/proc/bus/input/devices). After upgrading, tap-to-click no longer
worked, and I had to use physical buttons for pointer clicks; further, under
Mouse & Touchpad settings, the only options were primary button, mouse speed
and natural scrolling: no option to enable tap-to-click. Various sites
suggested various remedies (including Gnome Tweak Tool, which didn't work), but
the solution that worked for me was to uninstall/purge xserver-xorg-input-
synaptics: with that gone, after logging out and in, I had a much longer list
of Mouse & Touchpad settings, including tap-to-click.
It seems that xserver-xorg-input-synaptics sabotages xserver-xorg-input-
libinput. From some sources I understand that -synaptics may be obsolete and
-libinput the future; if so then perhaps the upgrade process is at fault, as I
had both of these installed after the stretch upgrade.
Regards,
Conrad
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Sep 23 2012 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Mar 3 14:41 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 2700 Nov 17 2012 synaptics.conf
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 32124 Feb 13 2016 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 30874 Jun 26 16:33 /var/log/Xorg.0.log
-rw-r--r-- 1 conrad users 32357 Jun 26 19:05 /home/conrad/.local/share/xorg/Xorg.0.log
Contents of most recent Xorg X server log file (/home/conrad/.local/share/xorg/Xorg.0.log):
-------------------------------------------------------------------------------------------
[ 664.405] (--) Log file renamed from "/home/conrad/.local/share/xorg/Xorg.pid-8216.log" to "/home/conrad/.local/share/xorg/Xorg.0.log"
[ 664.405]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 664.405] X Protocol Version 11, Revision 0
[ 664.405] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 664.405] Current Operating System: Linux waif 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64
[ 664.405] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=/dev/mapper/waif-root ro quiet
[ 664.405] Build Date: 03 March 2017 03:14:41PM
[ 664.405] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 664.405] Current version of pixman: 0.34.0
[ 664.405] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 664.405] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 664.405] (==) Log file: "/home/conrad/.local/share/xorg/Xorg.0.log", Time: Mon Jun 26 19:05:45 2017
[ 664.405] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 664.405] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 664.406] (==) No Layout section. Using the first Screen section.
[ 664.406] (==) No screen section available. Using defaults.
[ 664.406] (**) |-->Screen "Default Screen Section" (0)
[ 664.406] (**) | |-->Monitor "<default monitor>"
[ 664.406] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 664.406] (==) Automatically adding devices
[ 664.406] (==) Automatically enabling devices
[ 664.406] (==) Automatically adding GPU devices
[ 664.406] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 664.406] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 664.406] Entry deleted from font path.
[ 664.406] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 664.406] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 664.406] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 664.406] (II) Loader magic: 0x56543e7f1e00
[ 664.406] (II) Module ABI versions:
[ 664.406] X.Org ANSI C Emulation: 0.4
[ 664.406] X.Org Video Driver: 23.0
[ 664.406] X.Org XInput driver : 24.1
[ 664.406] X.Org Server Extension : 10.0
[ 664.407] (++) using VT number 2
[ 664.409] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_35
[ 664.410] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 664.410] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[ 664.411] (--) PCI:*(0:0:2:0) 8086:0166:104d:90a5 rev 9, Mem @ 0xd7000000/4194304, 0xc0000000/268435456, I/O @ 0x00009000/64, BIOS @ 0x????????/131072
[ 664.412] (II) LoadModule: "glx"
[ 664.412] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 664.413] (II) Module glx: vendor="X.Org Foundation"
[ 664.413] compiled for 1.19.2, module version = 1.0.0
[ 664.413] ABI class: X.Org Server Extension, version 10.0
[ 664.413] (==) Matched modesetting as autoconfigured driver 0
[ 664.413] (==) Matched fbdev as autoconfigured driver 1
[ 664.413] (==) Matched vesa as autoconfigured driver 2
[ 664.413] (==) Assigned the driver to the xf86ConfigLayout
[ 664.413] (II) LoadModule: "modesetting"
[ 664.413] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 664.413] (II) Module modesetting: vendor="X.Org Foundation"
[ 664.413] compiled for 1.19.2, module version = 1.19.2
[ 664.413] Module class: X.Org Video Driver
[ 664.413] ABI class: X.Org Video Driver, version 23.0
[ 664.413] (II) LoadModule: "fbdev"
[ 664.413] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 664.413] (II) Module fbdev: vendor="X.Org Foundation"
[ 664.413] compiled for 1.19.0, module version = 0.4.4
[ 664.414] Module class: X.Org Video Driver
[ 664.414] ABI class: X.Org Video Driver, version 23.0
[ 664.414] (II) LoadModule: "vesa"
[ 664.414] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 664.414] (II) Module vesa: vendor="X.Org Foundation"
[ 664.414] compiled for 1.19.0, module version = 2.3.4
[ 664.414] Module class: X.Org Video Driver
[ 664.414] ABI class: X.Org Video Driver, version 23.0
[ 664.414] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 664.414] (II) FBDEV: driver for framebuffer: fbdev
[ 664.414] (II) VESA: driver for VESA chipsets: vesa
[ 664.414] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 664.414] (II) modeset(0): using drv /dev/dri/card0
[ 664.414] (WW) Falling back to old probe method for fbdev
[ 664.414] (II) Loading sub module "fbdevhw"
[ 664.414] (II) LoadModule: "fbdevhw"
[ 664.414] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 664.414] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 664.414] compiled for 1.19.2, module version = 0.0.2
[ 664.414] ABI class: X.Org Video Driver, version 23.0
[ 664.414] (WW) Falling back to old probe method for vesa
[ 664.414] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 664.414] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 664.414] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 664.414] (==) modeset(0): RGB weight 888
[ 664.414] (==) modeset(0): Default visual is TrueColor
[ 664.414] (II) Loading sub module "glamoregl"
[ 664.414] (II) LoadModule: "glamoregl"
[ 664.414] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 664.419] (II) Module glamoregl: vendor="X.Org Foundation"
[ 664.419] compiled for 1.19.2, module version = 1.0.0
[ 664.419] ABI class: X.Org ANSI C Emulation, version 0.4
[ 664.419] (II) glamor: OpenGL accelerated X.org driver based.
[ 664.429] (II) glamor: EGL version 1.4 (DRI2):
[ 664.430] (II) modeset(0): glamor initialized
[ 664.431] (II) modeset(0): Output eDP-1 has no monitor section
[ 664.432] (II) modeset(0): Output VGA-1 has no monitor section
[ 664.433] (II) modeset(0): Output HDMI-1 has no monitor section
[ 664.433] (II) modeset(0): Output DP-1 has no monitor section
[ 664.433] (II) modeset(0): EDID for output eDP-1
[ 664.433] (II) modeset(0): Manufacturer: MS_ Model: 25 Serial#: 16843009
[ 664.433] (II) modeset(0): Year: 2012 Week: 25
[ 664.433] (II) modeset(0): EDID Version: 1.4
[ 664.433] (II) modeset(0): Digital Display Input
[ 664.433] (II) modeset(0): 8 bits per channel
[ 664.433] (II) modeset(0): Digital interface is DisplayPort
[ 664.433] (II) modeset(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 664.433] (II) modeset(0): Gamma: 2.20
[ 664.433] (II) modeset(0): No DPMS capabilities specified
[ 664.433] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 664.433] (II) modeset(0): First detailed timing is preferred mode
[ 664.433] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 664.433] (II) modeset(0): redX: 0.602 redY: 0.336 greenX: 0.296 greenY: 0.546
[ 664.433] (II) modeset(0): blueX: 0.148 blueY: 0.126 whiteX: 0.313 whiteY: 0.329
[ 664.433] (II) modeset(0): Manufacturer's mask: 0
[ 664.433] (II) modeset(0): Supported standard timings:
[ 664.433] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 664.433] (II) modeset(0): Supported detailed timing:
[ 664.433] (II) modeset(0): clock: 162.8 MHz Image Size: 291 x 164 mm
[ 664.433] (II) modeset(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2481 h_border: 0
[ 664.433] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 664.433] (II) modeset(0): Supported detailed timing:
[ 664.433] (II) modeset(0): clock: 99.9 MHz Image Size: 291 x 164 mm
[ 664.433] (II) modeset(0): h_active: 1920 h_sync: 1952 h_sync_end 1984 h_blank_end 2281 h_border: 0
[ 664.433] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1086 v_blanking: 1095 v_border: 0
[ 664.433] (II) modeset(0): Monitor name: Sony LCD
[ 664.433] (II) modeset(0): Ranges: V min: 39 V max: 61 Hz, H min: 43 H max: 66 kHz, PixClock max 175 MHz
[ 664.433] (II) modeset(0): EDID (in hex):
[ 664.433] (II) modeset(0): 00ffffffffffff00367f250001010101
[ 664.433] (II) modeset(0): 19160104a51d1078020f159a564b8b26
[ 664.433] (II) modeset(0): 205054000000d1c00101010101010101
[ 664.433] (II) modeset(0): 0101010101019c3f803172380f402020
[ 664.433] (II) modeset(0): 330023a4100000180727806971380f40
[ 664.433] (II) modeset(0): 2020330023a410000018000000fc0053
[ 664.433] (II) modeset(0): 6f6e79204c43440a20202020000000fd
[ 664.433] (II) modeset(0): 00273d2b4211000a2020202020200012
[ 664.433] (II) modeset(0): Printing probed modes for output eDP-1
[ 664.433] (II) modeset(0): Modeline "1920x1080"x59.9 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 664.433] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 664.433] (II) modeset(0): Modeline "1920x1080"x40.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 664.433] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 664.434] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 664.434] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 664.434] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 664.434] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 664.434] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 664.434] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 664.434] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 664.434] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 664.434] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 664.434] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 664.434] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 664.434] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 664.434] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 664.434] (II) modeset(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 664.434] (II) modeset(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 664.434] (II) modeset(0): Modeline "800x512"x60.2 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 664.434] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 664.434] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 664.434] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 664.434] (II) modeset(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 664.434] (II) modeset(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 664.434] (II) modeset(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 664.434] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 664.434] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 664.434] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 664.434] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 664.435] (II) modeset(0): EDID for output VGA-1
[ 664.435] (II) modeset(0): EDID for output HDMI-1
[ 664.435] (II) modeset(0): EDID for output DP-1
[ 664.435] (II) modeset(0): Output eDP-1 connected
[ 664.435] (II) modeset(0): Output VGA-1 disconnected
[ 664.435] (II) modeset(0): Output HDMI-1 disconnected
[ 664.435] (II) modeset(0): Output DP-1 disconnected
[ 664.435] (II) modeset(0): Using exact sizes for initial modes
[ 664.435] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 664.435] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 664.435] (==) modeset(0): DPI set to (96, 96)
[ 664.435] (II) Loading sub module "fb"
[ 664.435] (II) LoadModule: "fb"
[ 664.436] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 664.436] (II) Module fb: vendor="X.Org Foundation"
[ 664.436] compiled for 1.19.2, module version = 1.0.0
[ 664.436] ABI class: X.Org ANSI C Emulation, version 0.4
[ 664.436] (II) UnloadModule: "fbdev"
[ 664.436] (II) Unloading fbdev
[ 664.436] (II) UnloadSubModule: "fbdevhw"
[ 664.436] (II) Unloading fbdevhw
[ 664.436] (II) UnloadModule: "vesa"
[ 664.436] (II) Unloading vesa
[ 664.436] (==) Depth 24 pixmap format is 32 bpp
[ 664.510] (==) modeset(0): Backing store enabled
[ 664.510] (==) modeset(0): Silken mouse enabled
[ 664.510] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 664.510] (==) modeset(0): DPMS enabled
[ 664.510] (II) modeset(0): [DRI2] Setup complete
[ 664.510] (II) modeset(0): [DRI2] DRI driver: i965
[ 664.510] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 664.510] (--) RandR disabled
[ 664.512] (II) SELinux: Disabled on system
[ 664.516] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 664.516] (II) AIGLX: enabled GLX_ARB_create_context
[ 664.516] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 664.516] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 664.516] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 664.516] (II) AIGLX: enabled GLX_SGI_swap_control
[ 664.516] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 664.516] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 664.516] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 664.516] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 664.516] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 664.517] (II) AIGLX: Loaded and initialized i965
[ 664.517] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 664.518] (II) modeset(0): Damage tracking initialized
[ 664.518] (II) modeset(0): Setting screen physical size to 508 x 285
[ 664.553] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 664.553] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 664.553] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 664.553] (II) LoadModule: "libinput"
[ 664.553] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 664.554] (II) Module libinput: vendor="X.Org Foundation"
[ 664.554] compiled for 1.19.0, module version = 0.23.0
[ 664.554] Module class: X.Org XInput Driver
[ 664.554] ABI class: X.Org XInput driver, version 24.1
[ 664.554] (II) Using input driver 'libinput' for 'Video Bus'
[ 664.555] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 21 paused 0
[ 664.555] (**) Video Bus: always reports core events
[ 664.555] (**) Option "Device" "/dev/input/event3"
[ 664.555] (**) Option "_source" "server/udev"
[ 664.555] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[ 664.555] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[ 664.555] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input5/event3"
[ 664.555] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 664.555] (**) Option "xkb_model" "pc105"
[ 664.556] (**) Option "xkb_layout" "gb"
[ 664.569] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[ 664.569] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[ 664.569] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event5)
[ 664.569] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 664.569] (**) Sony Vaio Keys: Applying InputClass "libinput keyboard catchall"
[ 664.569] (II) Using input driver 'libinput' for 'Sony Vaio Keys'
[ 664.570] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 24 paused 0
[ 664.570] (**) Sony Vaio Keys: always reports core events
[ 664.570] (**) Option "Device" "/dev/input/event5"
[ 664.570] (**) Option "_source" "server/udev"
[ 664.570] (II) input device 'Sony Vaio Keys', /dev/input/event5 is tagged by udev as: Keyboard
[ 664.570] (II) input device 'Sony Vaio Keys', /dev/input/event5 is a keyboard
[ 664.570] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6/event5"
[ 664.570] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 664.570] (**) Option "xkb_model" "pc105"
[ 664.570] (**) Option "xkb_layout" "gb"
[ 664.570] (II) input device 'Sony Vaio Keys', /dev/input/event5 is tagged by udev as: Keyboard
[ 664.570] (II) input device 'Sony Vaio Keys', /dev/input/event5 is a keyboard
[ 664.571] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event6)
[ 664.571] (**) Sony Vaio Jogdial: Applying InputClass "evdev keyboard catchall"
[ 664.571] (**) Sony Vaio Jogdial: Applying InputClass "libinput keyboard catchall"
[ 664.571] (II) Using input driver 'libinput' for 'Sony Vaio Jogdial'
[ 664.571] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 25 paused 0
[ 664.571] (**) Sony Vaio Jogdial: always reports core events
[ 664.571] (**) Option "Device" "/dev/input/event6"
[ 664.571] (**) Option "_source" "server/udev"
[ 664.571] (II) input device 'Sony Vaio Jogdial', /dev/input/event6 is tagged by udev as: Keyboard
[ 664.571] (II) input device 'Sony Vaio Jogdial', /dev/input/event6 is a keyboard
[ 664.571] (II) libinput: Sony Vaio Jogdial: needs a virtual subdevice
[ 664.571] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7/event6"
[ 664.571] (II) XINPUT: Adding extended input device "Sony Vaio Jogdial" (type: MOUSE, id 8)
[ 664.572] (**) Option "AccelerationScheme" "none"
[ 664.572] (**) Sony Vaio Jogdial: (accel) selected scheme none/0
[ 664.572] (**) Sony Vaio Jogdial: (accel) acceleration factor: 2.000
[ 664.572] (**) Sony Vaio Jogdial: (accel) acceleration threshold: 4
[ 664.572] (II) input device 'Sony Vaio Jogdial', /dev/input/event6 is tagged by udev as: Keyboard
[ 664.572] (II) input device 'Sony Vaio Jogdial', /dev/input/event6 is a keyboard
[ 664.572] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[ 664.572] (II) No input driver specified, ignoring this device.
[ 664.572] (II) This device may have been added with another device file.
[ 664.572] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 664.572] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 664.572] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 664.572] (II) Using input driver 'libinput' for 'Power Button'
[ 664.573] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 26 paused 0
[ 664.573] (**) Power Button: always reports core events
[ 664.573] (**) Option "Device" "/dev/input/event2"
[ 664.573] (**) Option "_source" "server/udev"
[ 664.573] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 664.573] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 664.573] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 664.573] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 664.573] (**) Option "xkb_model" "pc105"
[ 664.573] (**) Option "xkb_layout" "gb"
[ 664.573] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 664.573] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 664.574] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 664.574] (II) No input driver specified, ignoring this device.
[ 664.574] (II) This device may have been added with another device file.
[ 664.574] (II) config/udev: Adding input device USB2.0 Camera (/dev/input/event8)
[ 664.574] (**) USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 664.574] (**) USB2.0 Camera: Applying InputClass "libinput keyboard catchall"
[ 664.574] (II) Using input driver 'libinput' for 'USB2.0 Camera'
[ 664.575] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 27 paused 0
[ 664.575] (**) USB2.0 Camera: always reports core events
[ 664.575] (**) Option "Device" "/dev/input/event8"
[ 664.575] (**) Option "_source" "server/udev"
[ 664.575] (II) input device 'USB2.0 Camera', /dev/input/event8 is tagged by udev as: Keyboard
[ 664.575] (II) input device 'USB2.0 Camera', /dev/input/event8 is a keyboard
[ 664.575] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9/event8"
[ 664.575] (II) XINPUT: Adding extended input device "USB2.0 Camera" (type: KEYBOARD, id 10)
[ 664.575] (**) Option "xkb_model" "pc105"
[ 664.575] (**) Option "xkb_layout" "gb"
[ 664.576] (II) input device 'USB2.0 Camera', /dev/input/event8 is tagged by udev as: Keyboard
[ 664.576] (II) input device 'USB2.0 Camera', /dev/input/event8 is a keyboard
[ 664.576] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 664.576] (II) No input driver specified, ignoring this device.
[ 664.576] (II) This device may have been added with another device file.
[ 664.576] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 664.576] (II) No input driver specified, ignoring this device.
[ 664.576] (II) This device may have been added with another device file.
[ 664.576] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 664.577] (II) No input driver specified, ignoring this device.
[ 664.577] (II) This device may have been added with another device file.
[ 664.577] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 664.577] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 664.577] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 664.577] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 664.577] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[ 664.577] (**) AT Translated Set 2 keyboard: always reports core events
[ 664.577] (**) Option "Device" "/dev/input/event0"
[ 664.577] (**) Option "_source" "server/udev"
[ 664.577] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 664.577] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 664.577] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 664.578] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 664.578] (**) Option "xkb_model" "pc105"
[ 664.578] (**) Option "xkb_layout" "gb"
[ 664.578] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 664.578] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 664.578] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 664.578] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 664.578] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 664.578] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 664.578] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 664.578] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Clickpad buttons"
[ 664.578] (II) LoadModule: "synaptics"
[ 664.578] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 664.578] (II) Module synaptics: vendor="X.Org Foundation"
[ 664.578] compiled for 1.19.0, module version = 1.9.0
[ 664.578] Module class: X.Org XInput Driver
[ 664.578] ABI class: X.Org XInput driver, version 24.1
[ 664.578] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 664.596] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 29 paused 0
[ 664.596] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 664.596] (**) Option "Device" "/dev/input/event4"
[ 664.596] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1172 - 5768 (res 66)
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 68)
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 664.596] (**) Option "HorizHysteresis" "2%"
[ 664.596] (**) Option "VertHysteresis" "2%"
[ 664.596] (**) Option "SoftButtonAreas" "4237 0 0 0 2705 4236 0 0"
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 664.596] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 664.596] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 664.596] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 664.596] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 664.596] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 664.596] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[ 664.596] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 664.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 664.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 664.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 664.596] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 664.597] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 664.597] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 664.597] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 664.597] (II) No input driver specified, ignoring this device.
[ 664.597] (II) This device may have been added with another device file.
[ 664.613] (**) Sony Vaio Jogdial: Applying InputClass "evdev keyboard catchall"
[ 664.613] (**) Sony Vaio Jogdial: Applying InputClass "libinput keyboard catchall"
[ 664.613] (II) Using input driver 'libinput' for 'Sony Vaio Jogdial'
[ 664.613] (II) systemd-logind: returning pre-existing fd for /dev/input/event6 13:70
[ 664.613] (**) Sony Vaio Jogdial: always reports core events
[ 664.613] (**) Option "Device" "/dev/input/event6"
[ 664.613] (**) Option "_source" "_driver/libinput"
[ 664.613] (II) libinput: Sony Vaio Jogdial: is a virtual subdevice
[ 664.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7/event6"
[ 664.613] (II) XINPUT: Adding extended input device "Sony Vaio Jogdial" (type: KEYBOARD, id 13)
[ 664.613] (**) Option "xkb_model" "pc105"
[ 664.613] (**) Option "xkb_layout" "gb"
[ 664.834] (II) modeset(0): EDID vendor "MS_", prod id 37
[ 664.834] (II) modeset(0): Using EDID range info for horizontal sync
[ 664.834] (II) modeset(0): Using EDID range info for vertical refresh
[ 664.834] (II) modeset(0): Printing DDC gathered Modelines:
[ 664.834] (II) modeset(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 664.834] (II) modeset(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 664.834] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 665.806] (II) modeset(0): EDID vendor "MS_", prod id 37
[ 665.806] (II) modeset(0): Using hsync ranges from config file
[ 665.806] (II) modeset(0): Using vrefresh ranges from config file
[ 665.806] (II) modeset(0): Printing DDC gathered Modelines:
[ 665.806] (II) modeset(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 665.806] (II) modeset(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 665.806] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 678.661] (II) modeset(0): EDID vendor "MS_", prod id 37
[ 678.661] (II) modeset(0): Using hsync ranges from config file
[ 678.661] (II) modeset(0): Using vrefresh ranges from config file
[ 678.661] (II) modeset(0): Printing DDC gathered Modelines:
[ 678.662] (II) modeset(0): Modeline "1920x1080"x0.0 162.84 1920 1952 1984 2481 1080 1083 1086 1095 -hsync -vsync (65.6 kHz eP)
[ 678.662] (II) modeset(0): Modeline "1920x1080"x0.0 99.91 1920 1952 1984 2281 1080 1083 1086 1095 -hsync -vsync (43.8 kHz e)
[ 678.662] (II) modeset(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_09
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:09
E: ID_PATH_TAG=acpi-LNXVIDEO_09
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3093968
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input5/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input5/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:09
E: ID_PATH_TAG=acpi-LNXVIDEO_09
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14907233
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6
E: EV=13
E: ID_FOR_SEAT=input-acpi-SNY5001_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: KEY=1fd6070000 c00000000 10010000000000 200000000 600f00102c00 380000240300400 e000000000000 0
E: MODALIAS=input:b0010v104Dp0000e0000-e0,1,4,k71,72,73,8A,94,95,9E,A1,B7,B8,B9,CA,CB,CD,D4,E0,E1,E2,E3,ED,EE,121,168,174,1A2,1A3,1D0,1D1,1D2,1D9,1DA,1DC,1DE,1DF,1E0,1E1,1E2,1E3,1E4,ram4,lsfw
E: MSC=10
E: NAME="Sony Vaio Keys"
E: PRODUCT=10/104d/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14829803
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: KEYBOARD_KEY_06=mute
E: KEYBOARD_KEY_07=volumedown
E: KEYBOARD_KEY_08=volumeup
E: KEYBOARD_KEY_09=brightnessdown
E: KEYBOARD_KEY_0a=brightnessup
E: KEYBOARD_KEY_0b=switchvideomode
E: KEYBOARD_KEY_0e=zoom
E: KEYBOARD_KEY_10=suspend
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14901322
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7
E: EV=7
E: ID_FOR_SEAT=input-acpi-SNY5001_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: KEY=40000 0 0 0 0
E: MODALIAS=input:b0010v104Dp0000e0000-e0,1,2,k112,r8,amlsfw
E: NAME="Sony Vaio Jogdial"
E: PRODUCT=10/104d/0/0
E: PROP=0
E: REL=100
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14830383
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14881138
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input7/mouse1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14831915
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3031307
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:PNP0C0C/button
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14907493
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=3031173
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14907233
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_Camera
E: ID_MODEL_ENC=USB2.0\x20Camera
E: ID_MODEL_ID=18c6
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_REVISION=0012
E: ID_SERIAL=1458529110CR47BD_USB2.0_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=1458529110CR47BD
E: ID_VENDOR_ENC=1458529110CR47BD
E: ID_VENDOR_ID=05ca
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v05CAp18C6e0012-e0,1,kD4,ramlsfw
E: NAME="USB2.0 Camera"
E: PHYS="usb-0000:00:1a.0-1.3/button"
E: PRODUCT=3/5ca/18c6/12
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14853769
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9/event8
N: input/event8
S: input/by-id/usb-1458529110CR47BD_USB2.0_Camera-event-if00
S: input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-1458529110CR47BD_USB2.0_Camera-event-if00 /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.0-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_Camera
E: ID_MODEL_ENC=USB2.0\x20Camera
E: ID_MODEL_ID=18c6
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_REVISION=0012
E: ID_SERIAL=1458529110CR47BD_USB2.0_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=1458529110CR47BD
E: ID_VENDOR_ENC=1458529110CR47BD
E: ID_VENDOR_ID=05ca
E: LIBINPUT_DEVICE_GROUP=3/5ca/18c6/12:usb-0000:00:1a.0-1
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14923382
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0275e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/275/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14863822
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=1/10ec/275/1:card0/codec#0/beep0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14922920
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=14866594
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14923141
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=14866669
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14942534
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3017015
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab41:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14907236
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input4
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input4
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3829522
P: /devices/platform/i8042/serio1/input/input4/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/i8042/serio1/input/input4/event4
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=53
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=69
E: LIBINPUT_DEVICE_GROUP=11/2/7/1b1:isa0060/serio1
E: LIBINPUT_MODEL_SYNAPTICS_SERIAL_TOUCHPAD=1
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14909340
P: /devices/platform/i8042/serio1/input/input4/mouse0
N: input/mouse0
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input4/mouse0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3830271
P: /devices/platform/pcspkr/input/input8
E: DEVPATH=/devices/platform/pcspkr/input/input8
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14842351
P: /devices/platform/pcspkr/input/input8/event7
N: input/event7
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/pcspkr/input/input8/event7
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14908316
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: 9.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.9.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8), LANGUAGE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-input-synaptics depends on:
ii libc6 2.24-11+deb9u1
ii libevdev2 1.5.6+dfsg-1
ii libx11-6 2:1.6.4-3
ii libxi6 2:1.7.9-1
ii libxtst6 2:1.2.3-1
ii xserver-xorg-core [xorg-input-abi-24] 2:1.19.2-1
xserver-xorg-input-synaptics recommends no packages.
Versions of packages xserver-xorg-input-synaptics suggests:
pn gpointing-device-settings <none>
pn touchfreeze <none>
-- no debconf information
Reply to: