Bug#848558: xserver-xorg-video-intel: Individual windows have update corruption
Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20161105-1~bpo8+1
Severity: normal
Dear Maintainer,
After upgrading to 2:2.99.917+git20161105-1~bpo8+1 from jessie-backports, I
have seen some windows fail to draw updates correctly. The window shows old
state, even though the software is otherwise actually in the expected
state. This is on a mid-2016 Dell XPS 13 Developer Edition.
The issue I can reproduce most reliably is in the Thunderbird compose
window. If I jump to the beginning or end of the message body with
Ctrl+Home or Ctrl+End, only a very small part of the compose window appears
to update. Otherwise, it continues to show its original location. I have
to hide and re-render the window (I usually use Ctrl+` in GNOME) to fix it.
Sometimes in Emacs (running under X) while I'm typing, a character will fail
to render. Usually moving the cursor on the same line (e.g., Ctrl+A, Alt+B)
will cause it to draw. Ctrl+L always will too.
Sometimes in GNOME Terminal running screen, when I switch screens, the new
screen does not render. Again, a couple of Ctrl+L usually fixes it.
The issue is disruptive enough that I have downgraded back to the previous
backport.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Aug 22 22:05 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2401376 Feb 10 2015 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:1926] (rev 0a)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 0
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.9.0 (root@shelley) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Sat Dec 17 11:19:20 EST 2016
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 12.992]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 12.992] X Protocol Version 11, Revision 0
[ 12.992] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 12.992] Current Operating System: Linux shelley 4.9.0 #1 SMP Sat Dec 17 11:19:20 EST 2016 x86_64
[ 12.992] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0 root=/dev/mapper/shelley-root ro quiet
[ 12.992] Build Date: 11 February 2015 12:32:02AM
[ 12.992] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 12.992] Current version of pixman: 0.32.6
[ 12.992] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.992] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.992] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 17 12:59:01 2016
[ 12.999] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.999] (==) No Layout section. Using the first Screen section.
[ 12.999] (==) No screen section available. Using defaults.
[ 12.999] (**) |-->Screen "Default Screen Section" (0)
[ 12.999] (**) | |-->Monitor "<default monitor>"
[ 13.000] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.000] (==) Automatically adding devices
[ 13.000] (==) Automatically enabling devices
[ 13.000] (==) Automatically adding GPU devices
[ 13.012] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.012] Entry deleted from font path.
[ 13.020] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 13.020] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.020] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.021] (II) Loader magic: 0x5571581a7d80
[ 13.021] (II) Module ABI versions:
[ 13.021] X.Org ANSI C Emulation: 0.4
[ 13.021] X.Org Video Driver: 18.0
[ 13.021] X.Org XInput driver : 21.0
[ 13.021] X.Org Server Extension : 8.0
[ 13.022] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.073] (--) PCI:*(0:0:2:0) 8086:1926:1028:0704 rev 10, Mem @ 0xdb000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 13.075] (II) LoadModule: "glx"
[ 13.077] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.084] (II) Module glx: vendor="X.Org Foundation"
[ 13.084] compiled for 1.16.4, module version = 1.0.0
[ 13.084] ABI class: X.Org Server Extension, version 8.0
[ 13.084] (==) AIGLX enabled
[ 13.084] (==) Matched intel as autoconfigured driver 0
[ 13.084] (==) Matched intel as autoconfigured driver 1
[ 13.084] (==) Matched modesetting as autoconfigured driver 2
[ 13.084] (==) Matched fbdev as autoconfigured driver 3
[ 13.084] (==) Matched vesa as autoconfigured driver 4
[ 13.084] (==) Assigned the driver to the xf86ConfigLayout
[ 13.084] (II) LoadModule: "intel"
[ 13.084] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.089] (II) Module intel: vendor="X.Org Foundation"
[ 13.089] compiled for 1.16.4, module version = 2.99.917
[ 13.089] Module class: X.Org Video Driver
[ 13.089] ABI class: X.Org Video Driver, version 18.0
[ 13.089] (II) LoadModule: "modesetting"
[ 13.089] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 13.089] (II) Module modesetting: vendor="X.Org Foundation"
[ 13.090] compiled for 1.16.4, module version = 0.9.0
[ 13.090] Module class: X.Org Video Driver
[ 13.090] ABI class: X.Org Video Driver, version 18.0
[ 13.090] (II) LoadModule: "fbdev"
[ 13.090] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 13.090] (II) Module fbdev: vendor="X.Org Foundation"
[ 13.090] compiled for 1.15.99.904, module version = 0.4.4
[ 13.090] Module class: X.Org Video Driver
[ 13.090] ABI class: X.Org Video Driver, version 18.0
[ 13.090] (II) LoadModule: "vesa"
[ 13.090] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 13.091] (II) Module vesa: vendor="X.Org Foundation"
[ 13.091] compiled for 1.15.99.904, module version = 2.3.3
[ 13.091] Module class: X.Org Video Driver
[ 13.091] ABI class: X.Org Video Driver, version 18.0
[ 13.091] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 13.091] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 13.091] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 13.091] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 13.091] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13.091] (II) FBDEV: driver for framebuffer: fbdev
[ 13.091] (II) VESA: driver for VESA chipsets: vesa
[ 13.091] (++) using VT number 7
[ 13.113] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 13.113] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161105-1~bpo8+1 (Vincent Cheng <vcheng@debian.org>)
[ 13.113] (II) intel(0): SNA compiled for use with valgrind
[ 13.114] (WW) Falling back to old probe method for modesetting
[ 13.114] (WW) Falling back to old probe method for fbdev
[ 13.114] (II) Loading sub module "fbdevhw"
[ 13.114] (II) LoadModule: "fbdevhw"
[ 13.114] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 13.116] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13.116] compiled for 1.16.4, module version = 0.0.2
[ 13.116] ABI class: X.Org Video Driver, version 18.0
[ 13.116] (WW) Falling back to old probe method for vesa
[ 13.118] (--) intel(0): gen9 engineering sample
[ 13.118] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 13.118] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.118] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.118] (==) intel(0): RGB weight 888
[ 13.118] (==) intel(0): Default visual is TrueColor
[ 13.119] (II) intel(0): Output eDP1 has no monitor section
[ 13.145] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 13.145] (II) intel(0): Enabled output eDP1
[ 13.145] (II) intel(0): Output DP1 has no monitor section
[ 13.145] (II) intel(0): Enabled output DP1
[ 13.145] (II) intel(0): Output HDMI1 has no monitor section
[ 13.145] (II) intel(0): Enabled output HDMI1
[ 13.145] (II) intel(0): Output DP2 has no monitor section
[ 13.145] (II) intel(0): Enabled output DP2
[ 13.145] (II) intel(0): Output HDMI2 has no monitor section
[ 13.146] (II) intel(0): Enabled output HDMI2
[ 13.146] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 13.146] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 13.146] (II) intel(0): Enabled output VIRTUAL1
[ 13.146] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[ 13.146] (==) intel(0): TearFree disabled
[ 13.146] (==) intel(0): DPI set to (96, 96)
[ 13.146] (II) Loading sub module "dri3"
[ 13.146] (II) LoadModule: "dri3"
[ 13.146] (II) Module "dri3" already built-in
[ 13.146] (II) Loading sub module "dri2"
[ 13.146] (II) LoadModule: "dri2"
[ 13.146] (II) Module "dri2" already built-in
[ 13.146] (II) Loading sub module "present"
[ 13.146] (II) LoadModule: "present"
[ 13.146] (II) Module "present" already built-in
[ 13.151] (II) UnloadModule: "modesetting"
[ 13.151] (II) Unloading modesetting
[ 13.151] (II) UnloadModule: "fbdev"
[ 13.151] (II) Unloading fbdev
[ 13.151] (II) UnloadSubModule: "fbdevhw"
[ 13.151] (II) Unloading fbdevhw
[ 13.151] (II) UnloadModule: "vesa"
[ 13.151] (II) Unloading vesa
[ 13.151] (==) Depth 24 pixmap format is 32 bpp
[ 13.156] (II) intel(0): SNA initialized with Skylake (gen9) backend
[ 13.156] (==) intel(0): Backing store enabled
[ 13.156] (==) intel(0): Silken mouse enabled
[ 13.157] (II) intel(0): HW Cursor enabled
[ 13.157] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.157] (==) intel(0): DPMS enabled
[ 13.157] (==) intel(0): Display hotplug detection enabled
[ 13.158] (II) intel(0): [DRI2] Setup complete
[ 13.158] (II) intel(0): [DRI2] DRI driver: i965
[ 13.158] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 13.158] (II) intel(0): direct rendering: DRI2 enabled
[ 13.158] (II) intel(0): hardware support for Present enabled
[ 13.158] (--) RandR disabled
[ 13.167] (II) SELinux: Disabled on system
[ 13.193] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 13.193] (II) AIGLX: enabled GLX_ARB_create_context
[ 13.193] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 13.193] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 13.193] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 13.193] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 13.193] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 13.193] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 13.193] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 13.193] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 13.193] (II) AIGLX: Loaded and initialized i965
[ 13.193] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13.204] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 13.217] (II) intel(0): Setting screen physical size to 846 x 476
[ 13.279] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[ 13.279] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.279] (II) LoadModule: "evdev"
[ 13.279] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.284] (II) Module evdev: vendor="X.Org Foundation"
[ 13.284] compiled for 1.16.0, module version = 2.9.0
[ 13.284] Module class: X.Org XInput Driver
[ 13.284] ABI class: X.Org XInput driver, version 21.0
[ 13.284] (II) Using input driver 'evdev' for 'Power Button'
[ 13.284] (**) Power Button: always reports core events
[ 13.284] (**) evdev: Power Button: Device: "/dev/input/event8"
[ 13.284] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.284] (--) evdev: Power Button: Found keys
[ 13.284] (II) evdev: Power Button: Configuring as keyboard
[ 13.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8"
[ 13.284] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.284] (**) Option "xkb_rules" "evdev"
[ 13.285] (**) Option "xkb_model" "pc105"
[ 13.285] (**) Option "xkb_layout" "us"
[ 13.285] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 13.285] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.285] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.285] (**) Video Bus: always reports core events
[ 13.285] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 13.285] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 13.285] (--) evdev: Video Bus: Found keys
[ 13.285] (II) evdev: Video Bus: Configuring as keyboard
[ 13.285] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10"
[ 13.285] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 13.285] (**) Option "xkb_rules" "evdev"
[ 13.285] (**) Option "xkb_model" "pc105"
[ 13.285] (**) Option "xkb_layout" "us"
[ 13.285] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 13.285] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.285] (II) Using input driver 'evdev' for 'Power Button'
[ 13.285] (**) Power Button: always reports core events
[ 13.285] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 13.285] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.285] (--) evdev: Power Button: Found keys
[ 13.285] (II) evdev: Power Button: Configuring as keyboard
[ 13.285] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6"
[ 13.285] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 13.285] (**) Option "xkb_rules" "evdev"
[ 13.286] (**) Option "xkb_model" "pc105"
[ 13.286] (**) Option "xkb_layout" "us"
[ 13.286] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 13.286] (II) No input driver specified, ignoring this device.
[ 13.286] (II) This device may have been added with another device file.
[ 13.286] (II) config/udev: Adding input device Sleep Button (/dev/input/event7)
[ 13.286] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 13.286] (II) Using input driver 'evdev' for 'Sleep Button'
[ 13.286] (**) Sleep Button: always reports core events
[ 13.286] (**) evdev: Sleep Button: Device: "/dev/input/event7"
[ 13.286] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 13.286] (--) evdev: Sleep Button: Found keys
[ 13.286] (II) evdev: Sleep Button: Configuring as keyboard
[ 13.286] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event7"
[ 13.286] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 13.286] (**) Option "xkb_rules" "evdev"
[ 13.286] (**) Option "xkb_model" "pc105"
[ 13.286] (**) Option "xkb_layout" "us"
[ 13.287] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/event2)
[ 13.287] (**) Logitech Performance MX: Applying InputClass "evdev pointer catchall"
[ 13.287] (II) Using input driver 'evdev' for 'Logitech Performance MX'
[ 13.287] (**) Logitech Performance MX: always reports core events
[ 13.287] (**) evdev: Logitech Performance MX: Device: "/dev/input/event2"
[ 13.287] (--) evdev: Logitech Performance MX: Vendor 0x46d Product 0x101a
[ 13.287] (--) evdev: Logitech Performance MX: Found 20 mouse buttons
[ 13.287] (--) evdev: Logitech Performance MX: Found scroll wheel(s)
[ 13.287] (--) evdev: Logitech Performance MX: Found relative axes
[ 13.287] (--) evdev: Logitech Performance MX: Found x and y relative axes
[ 13.287] (II) evdev: Logitech Performance MX: Configuring as mouse
[ 13.287] (II) evdev: Logitech Performance MX: Adding scrollwheel support
[ 13.287] (**) evdev: Logitech Performance MX: YAxisMapping: buttons 4 and 5
[ 13.287] (**) evdev: Logitech Performance MX: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:101A.0004/input/input3/event2"
[ 13.287] (II) XINPUT: Adding extended input device "Logitech Performance MX" (type: MOUSE, id 10)
[ 13.287] (II) evdev: Logitech Performance MX: initialized for relative axes.
[ 13.287] (**) Logitech Performance MX: (accel) keeping acceleration scheme 1
[ 13.287] (**) Logitech Performance MX: (accel) acceleration profile 0
[ 13.287] (**) Logitech Performance MX: (accel) acceleration factor: 2.000
[ 13.287] (**) Logitech Performance MX: (accel) acceleration threshold: 4
[ 13.288] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/mouse1)
[ 13.288] (II) No input driver specified, ignoring this device.
[ 13.288] (II) This device may have been added with another device file.
[ 13.292] (II) config/udev: Adding input device USB Keyboard (/dev/input/event3)
[ 13.292] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.292] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 13.292] (**) USB Keyboard: always reports core events
[ 13.292] (**) evdev: USB Keyboard: Device: "/dev/input/event3"
[ 13.292] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169
[ 13.292] (--) evdev: USB Keyboard: Found keys
[ 13.292] (II) evdev: USB Keyboard: Configuring as keyboard
[ 13.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.0005/input/input4/event3"
[ 13.292] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 11)
[ 13.292] (**) Option "xkb_rules" "evdev"
[ 13.292] (**) Option "xkb_model" "pc105"
[ 13.292] (**) Option "xkb_layout" "us"
[ 13.292] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4)
[ 13.292] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.292] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 13.292] (**) USB Keyboard: always reports core events
[ 13.292] (**) evdev: USB Keyboard: Device: "/dev/input/event4"
[ 13.292] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169
[ 13.292] (--) evdev: USB Keyboard: Found keys
[ 13.292] (II) evdev: USB Keyboard: Configuring as keyboard
[ 13.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0006/input/input5/event4"
[ 13.292] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 12)
[ 13.292] (**) Option "xkb_rules" "evdev"
[ 13.292] (**) Option "xkb_model" "pc105"
[ 13.292] (**) Option "xkb_layout" "us"
[ 13.293] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event9)
[ 13.293] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 13.293] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 13.293] (**) ELAN Touchscreen: always reports core events
[ 13.293] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event9"
[ 13.293] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x2234
[ 13.293] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 13.293] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 13.293] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 13.293] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 13.293] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 13.293] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 13.293] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 13.293] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.293] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/event9"
[ 13.293] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 13)
[ 13.293] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 13.293] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 13.293] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 13.293] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 13.293] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 13.293] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse2)
[ 13.293] (II) No input driver specified, ignoring this device.
[ 13.293] (II) This device may have been added with another device file.
[ 13.294] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event11)
[ 13.294] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 13.294] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 13.294] (**) Integrated_Webcam_HD: always reports core events
[ 13.294] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event11"
[ 13.294] (--) evdev: Integrated_Webcam_HD: Vendor 0xc45 Product 0x670c
[ 13.294] (--) evdev: Integrated_Webcam_HD: Found keys
[ 13.294] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 13.294] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event11"
[ 13.294] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 14)
[ 13.294] (**) Option "xkb_rules" "evdev"
[ 13.294] (**) Option "xkb_model" "pc105"
[ 13.294] (**) Option "xkb_layout" "us"
[ 13.294] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/event13)
[ 13.294] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "evdev touchpad catchall"
[ 13.294] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "touchpad catchall"
[ 13.294] (**) DLL0704:01 06CB:76AE Touchpad: Applying InputClass "Default clickpad buttons"
[ 13.294] (II) LoadModule: "synaptics"
[ 13.294] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 13.295] (II) Module synaptics: vendor="X.Org Foundation"
[ 13.295] compiled for 1.16.0.901, module version = 1.8.99
[ 13.295] Module class: X.Org XInput Driver
[ 13.295] ABI class: X.Org XInput driver, version 21.0
[ 13.295] (II) Using input driver 'synaptics' for 'DLL0704:01 06CB:76AE Touchpad'
[ 13.295] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 13.295] (**) Option "Device" "/dev/input/event13"
[ 13.332] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: found clickpad property
[ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: x-axis range 0 - 1216 (res 12)
[ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: y-axis range 0 - 680 (res 12)
[ 13.332] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report pressure, will use touch data.
[ 13.332] (II) synaptics: DLL0704:01 06CB:76AE Touchpad: device does not report finger width.
[ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: buttons: left double triple
[ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: Vendor 0x6cb Product 0x76ae
[ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid pressure range. defaulting to 0 - 255
[ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: invalid finger width range. defaulting to 0 - 15
[ 13.332] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 13.332] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 13.332] (**) DLL0704:01 06CB:76AE Touchpad: always reports core events
[ 13.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/event13"
[ 13.372] (II) XINPUT: Adding extended input device "DLL0704:01 06CB:76AE Touchpad" (type: TOUCHPAD, id 15)
[ 13.372] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 13.372] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) MaxSpeed is now 1.75
[ 13.372] (**) synaptics: DLL0704:01 06CB:76AE Touchpad: (accel) AccelFactor is now 0.144
[ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) keeping acceleration scheme 1
[ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration profile 1
[ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration factor: 2.000
[ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: (accel) acceleration threshold: 4
[ 13.372] (--) synaptics: DLL0704:01 06CB:76AE Touchpad: touchpad found
[ 13.372] (II) config/udev: Adding input device DLL0704:01 06CB:76AE Touchpad (/dev/input/mouse3)
[ 13.372] (**) DLL0704:01 06CB:76AE Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 13.372] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[ 13.373] (II) No input driver specified, ignoring this device.
[ 13.373] (II) This device may have been added with another device file.
[ 13.373] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event15)
[ 13.373] (II) No input driver specified, ignoring this device.
[ 13.373] (II) This device may have been added with another device file.
[ 13.373] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 13.373] (II) No input driver specified, ignoring this device.
[ 13.373] (II) This device may have been added with another device file.
[ 13.373] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 13.373] (II) No input driver specified, ignoring this device.
[ 13.373] (II) This device may have been added with another device file.
[ 13.373] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 13.373] (II) No input driver specified, ignoring this device.
[ 13.373] (II) This device may have been added with another device file.
[ 13.373] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.373] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.373] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 13.373] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.373] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 13.373] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 13.373] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 13.373] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.373] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13.373] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 13.373] (**) Option "xkb_rules" "evdev"
[ 13.373] (**) Option "xkb_model" "pc105"
[ 13.373] (**) Option "xkb_layout" "us"
[ 13.374] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 13.374] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 13.374] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 13.374] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 13.374] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 13.374] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.374] (**) Option "Device" "/dev/input/event1"
[ 13.420] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 0)
[ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1118 - 4734 (res 0)
[ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 13.420] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 13.420] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13.420] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.456] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 13.456] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 13.456] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 13.456] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 13.456] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 13.456] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 13.456] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13.456] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 13.456] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 13.456] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[ 13.456] (II) No input driver specified, ignoring this device.
[ 13.456] (II) This device may have been added with another device file.
[ 13.467] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 13.467] (II) No input driver specified, ignoring this device.
[ 13.467] (II) This device may have been added with another device file.
[ 13.467] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event15)
[ 13.467] (II) No input driver specified, ignoring this device.
[ 13.467] (II) This device may have been added with another device file.
[ 13.467] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 13.467] (II) No input driver specified, ignoring this device.
[ 13.467] (II) This device may have been added with another device file.
[ 13.468] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 13.468] (II) No input driver specified, ignoring this device.
[ 13.468] (II) This device may have been added with another device file.
[ 13.900] (II) intel(0): EDID vendor "SHP", prod id 5194
[ 13.900] (II) intel(0): Printing DDC gathered Modelines:
[ 13.900] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 13.900] (II) intel(0): Modeline "3200x1800"x0.0 298.60 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (88.9 kHz e)
[ 1173.928] (II) config/udev: removing device Logitech Performance MX
[ 1173.944] (II) evdev: Logitech Performance MX: Close
[ 1173.944] (II) UnloadModule: "evdev"
[ 1174.026] (II) config/udev: removing device USB Keyboard
[ 1174.040] (II) evdev: USB Keyboard: Close
[ 1174.040] (II) UnloadModule: "evdev"
[ 1174.078] (II) config/udev: removing device USB Keyboard
[ 1174.104] (II) evdev: USB Keyboard: Close
[ 1174.104] (II) UnloadModule: "evdev"
(EE) SynPS/2 Synaptics TouchPad: Read error 19
[ 1206.149] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 1206.168] (II) UnloadModule: "synaptics"
[ 7783.224] (II) config/udev: Adding input device USB Keyboard (/dev/input/event3)
[ 7783.224] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7783.224] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 7783.224] (**) USB Keyboard: always reports core events
[ 7783.224] (**) evdev: USB Keyboard: Device: "/dev/input/event3"
[ 7783.224] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169
[ 7783.224] (--) evdev: USB Keyboard: Found keys
[ 7783.224] (II) evdev: USB Keyboard: Configuring as keyboard
[ 7783.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.000E/input/input28/event3"
[ 7783.224] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10)
[ 7783.224] (**) Option "xkb_rules" "evdev"
[ 7783.224] (**) Option "xkb_model" "pc105"
[ 7783.224] (**) Option "xkb_layout" "us"
[ 7783.226] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
[ 7783.226] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7783.226] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 7783.226] (**) USB Keyboard: always reports core events
[ 7783.226] (**) evdev: USB Keyboard: Device: "/dev/input/event2"
[ 7783.226] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169
[ 7783.226] (--) evdev: USB Keyboard: Found keys
[ 7783.226] (II) evdev: USB Keyboard: Configuring as keyboard
[ 7783.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000D/input/input27/event2"
[ 7783.227] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 11)
[ 7783.227] (**) Option "xkb_rules" "evdev"
[ 7783.227] (**) Option "xkb_model" "pc105"
[ 7783.227] (**) Option "xkb_layout" "us"
[ 7783.234] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/event1)
[ 7783.234] (**) Logitech Performance MX: Applying InputClass "evdev pointer catchall"
[ 7783.234] (II) Using input driver 'evdev' for 'Logitech Performance MX'
[ 7783.234] (**) Logitech Performance MX: always reports core events
[ 7783.234] (**) evdev: Logitech Performance MX: Device: "/dev/input/event1"
[ 7783.234] (--) evdev: Logitech Performance MX: Vendor 0x46d Product 0x101a
[ 7783.234] (--) evdev: Logitech Performance MX: Found 20 mouse buttons
[ 7783.234] (--) evdev: Logitech Performance MX: Found scroll wheel(s)
[ 7783.234] (--) evdev: Logitech Performance MX: Found relative axes
[ 7783.234] (--) evdev: Logitech Performance MX: Found x and y relative axes
[ 7783.234] (II) evdev: Logitech Performance MX: Configuring as mouse
[ 7783.234] (II) evdev: Logitech Performance MX: Adding scrollwheel support
[ 7783.234] (**) evdev: Logitech Performance MX: YAxisMapping: buttons 4 and 5
[ 7783.234] (**) evdev: Logitech Performance MX: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7783.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.000B/0003:046D:101A.000C/input/input26/event1"
[ 7783.234] (II) XINPUT: Adding extended input device "Logitech Performance MX" (type: MOUSE, id 12)
[ 7783.234] (II) evdev: Logitech Performance MX: initialized for relative axes.
[ 7783.235] (**) Logitech Performance MX: (accel) keeping acceleration scheme 1
[ 7783.235] (**) Logitech Performance MX: (accel) acceleration profile 0
[ 7783.235] (**) Logitech Performance MX: (accel) acceleration factor: 2.000
[ 7783.235] (**) Logitech Performance MX: (accel) acceleration threshold: 4
[ 7783.236] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/mouse0)
[ 7783.236] (II) No input driver specified, ignoring this device.
[ 7783.236] (II) This device may have been added with another device file.
[ 7789.728] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 7789.739] (II) intel(0): resizing framebuffer to 3840x2160
[ 7789.780] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 7790.974] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 8140.857] (II) intel(0): resizing framebuffer to 3200x1800
[ 8140.861] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 8141.512] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 8141.603] (II) intel(0): resizing framebuffer to 3840x2160
[ 8141.635] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 8142.828] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 10937.551] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 10941.589] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 11594.002] (II) intel(0): resizing framebuffer to 3200x1800
[ 11594.012] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 11594.619] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 11594.646] (II) intel(0): resizing framebuffer to 3840x2160
[ 11594.674] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 11595.885] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 11883.507] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 12040.397] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 12041.344] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 12357.403] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 12928.434] (II) intel(0): resizing framebuffer to 3200x1800
[ 12928.442] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 12929.100] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 12929.103] (II) intel(0): resizing framebuffer to 3840x2160
[ 12929.120] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 12930.438] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 18579.019] (II) intel(0): resizing framebuffer to 3200x1800
[ 18579.022] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 18585.458] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 18585.480] (II) intel(0): resizing framebuffer to 3840x2160
[ 18585.493] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 18586.681] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 29252.535] (II) intel(0): resizing framebuffer to 3200x1800
[ 29252.543] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 29256.189] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 29256.201] (II) intel(0): resizing framebuffer to 3840x2160
[ 29256.225] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 29257.453] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 32297.457] (II) intel(0): resizing framebuffer to 3200x1800
[ 32297.463] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 32298.111] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 32298.115] (II) intel(0): resizing framebuffer to 3840x2160
[ 32298.126] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 32299.337] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 36806.508] (II) intel(0): resizing framebuffer to 3200x1800
[ 36806.516] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 36808.813] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 36808.825] (II) intel(0): resizing framebuffer to 3840x2160
[ 36808.846] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 36810.089] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 36944.287] (II) intel(0): resizing framebuffer to 3200x1800
[ 36944.293] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 36971.208] (II) config/udev: removing device AT Translated Set 2 keyboard
[ 36971.229] (II) evdev: AT Translated Set 2 keyboard: Close
[ 36971.230] (II) UnloadModule: "evdev"
[ 36971.231] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 36971.232] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 36971.232] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 36971.232] (**) AT Translated Set 2 keyboard: always reports core events
[ 36971.232] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 36971.232] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 36971.232] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 36971.232] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 36971.232] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input35/event0"
[ 36971.232] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 36971.232] (**) Option "xkb_rules" "evdev"
[ 36971.232] (**) Option "xkb_model" "pc105"
[ 36971.232] (**) Option "xkb_layout" "us"
[ 36989.426] (II) config/udev: removing device USB Keyboard
[ 36989.440] (II) evdev: USB Keyboard: Close
[ 36989.440] (II) UnloadModule: "evdev"
[ 36990.197] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 36990.198] (II) config/udev: removing device USB Keyboard
[ 36990.224] (II) evdev: USB Keyboard: Close
[ 36990.225] (II) UnloadModule: "evdev"
[ 36990.489] (II) intel(0): resizing framebuffer to 3840x2160
[ 36990.528] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 36991.776] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 37030.997] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2)
[ 37030.998] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 37030.998] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 37030.999] (**) USB Keyboard: always reports core events
[ 37030.999] (**) evdev: USB Keyboard: Device: "/dev/input/event2"
[ 37030.999] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169
[ 37031.000] (--) evdev: USB Keyboard: Found keys
[ 37031.000] (II) evdev: USB Keyboard: Configuring as keyboard
[ 37031.000] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40/event2"
[ 37031.001] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 10)
[ 37031.001] (**) Option "xkb_rules" "evdev"
[ 37031.001] (**) Option "xkb_model" "pc105"
[ 37031.001] (**) Option "xkb_layout" "us"
[ 37031.003] (II) config/udev: Adding input device USB Keyboard (/dev/input/event3)
[ 37031.003] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 37031.003] (II) Using input driver 'evdev' for 'USB Keyboard'
[ 37031.003] (**) USB Keyboard: always reports core events
[ 37031.003] (**) evdev: USB Keyboard: Device: "/dev/input/event3"
[ 37031.003] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x169
[ 37031.003] (--) evdev: USB Keyboard: Found keys
[ 37031.003] (II) evdev: USB Keyboard: Configuring as keyboard
[ 37031.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41/event3"
[ 37031.003] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 11)
[ 37031.003] (**) Option "xkb_rules" "evdev"
[ 37031.003] (**) Option "xkb_model" "pc105"
[ 37031.003] (**) Option "xkb_layout" "us"
[ 37066.925] (II) intel(0): resizing framebuffer to 3200x1800
[ 37066.932] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 37072.488] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 37072.506] (II) intel(0): resizing framebuffer to 3840x2160
[ 37072.527] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 37073.871] (--) intel(0): HDMI max TMDS frequency 600000KHz
[ 37087.204] (II) config/udev: removing device Logitech Performance MX
[ 37087.224] (II) evdev: Logitech Performance MX: Close
[ 37087.224] (II) UnloadModule: "evdev"
[ 37096.406] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/event1)
[ 37096.406] (**) Logitech Performance MX: Applying InputClass "evdev pointer catchall"
[ 37096.406] (II) Using input driver 'evdev' for 'Logitech Performance MX'
[ 37096.406] (**) Logitech Performance MX: always reports core events
[ 37096.406] (**) evdev: Logitech Performance MX: Device: "/dev/input/event1"
[ 37096.444] (--) evdev: Logitech Performance MX: Vendor 0x46d Product 0x101a
[ 37096.444] (--) evdev: Logitech Performance MX: Found 20 mouse buttons
[ 37096.444] (--) evdev: Logitech Performance MX: Found scroll wheel(s)
[ 37096.444] (--) evdev: Logitech Performance MX: Found relative axes
[ 37096.444] (--) evdev: Logitech Performance MX: Found x and y relative axes
[ 37096.444] (II) evdev: Logitech Performance MX: Configuring as mouse
[ 37096.444] (II) evdev: Logitech Performance MX: Adding scrollwheel support
[ 37096.444] (**) evdev: Logitech Performance MX: YAxisMapping: buttons 4 and 5
[ 37096.444] (**) evdev: Logitech Performance MX: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 37096.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/event1"
[ 37096.444] (II) XINPUT: Adding extended input device "Logitech Performance MX" (type: MOUSE, id 12)
[ 37096.445] (II) evdev: Logitech Performance MX: initialized for relative axes.
[ 37096.445] (**) Logitech Performance MX: (accel) keeping acceleration scheme 1
[ 37096.445] (**) Logitech Performance MX: (accel) acceleration profile 0
[ 37096.445] (**) Logitech Performance MX: (accel) acceleration factor: 2.000
[ 37096.446] (**) Logitech Performance MX: (accel) acceleration threshold: 4
[ 37096.447] (II) config/udev: Adding input device Logitech Performance MX (/dev/input/mouse0)
[ 37096.447] (II) No input driver specified, ignoring this device.
[ 37096.447] (II) This device may have been added with another device file.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=706497
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8
N: input/event8
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event8
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=716368
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=726147
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10
N: input/event10
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event10
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=726237
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=705548
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=716179
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=704257
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event5
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=715973
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=705871
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=716278
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_1_1_2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:14.0-usb-0:1.1:1.2
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046Dp101Ae0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech Performance MX"
E: PHYS="usb-0000:00:14.0-1.1:1"
E: PRODUCT=3/46d/101a/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=96372227
P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:14.0-usb-0:1.1:1.2
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=96372619
P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-if02-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:1.1:1.2-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0013/0003:046D:101A.0014/input/input42/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:14.0-usb-0:1.1:1.2
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=96372491
P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_2_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0169
E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_0
E: ID_REVISION=0209
E: ID_SERIAL=04d9_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=04d9
E: ID_VENDOR_ENC=04d9
E: ID_VENDOR_ID=04d9
E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0003v04D9p0169e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="USB Keyboard"
E: PHYS="usb-0000:00:14.0-1.2/input0"
E: PRODUCT=3/4d9/169/110
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=30810642
P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40/event2
N: input/event2
S: input/by-id/usb-04d9_USB_Keyboard-event-kbd
S: input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-04d9_USB_Keyboard-event-kbd /dev/input/by-path/pci-0000:00:14.0-usb-0:1.2:1.0-event-kbd
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:0169.000F/input/input40/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0169
E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_0
E: ID_REVISION=0209
E: ID_SERIAL=04d9_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=04d9
E: ID_VENDOR_ENC=04d9
E: ID_VENDOR_ID=04d9
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=37030869184
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41
E: EV=13
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_2_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0169
E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_1
E: ID_REVISION=0209
E: ID_SERIAL=04d9_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=04d9
E: ID_VENDOR_ENC=04d9
E: ID_VENDOR_ID=04d9
E: KEY=300a010802000 0 0 1078002044000 603878d801d6e9 1e000000000000 0
E: MODALIAS=input:b0003v04D9p0169e0110-e0,1,4,k71,72,73,74,80,83,85,86,87,89,8A,8C,8E,8F,90,9B,9C,9E,9F,A3,A4,A5,A6,AB,AC,AD,B5,B6,CE,D2,D9,E7,E8,E9,EA,F0,18D,197,19C,1A5,1A7,1B0,1B1,ram4,lsfw
E: MSC=10
E: NAME="USB Keyboard"
E: PHYS="usb-0000:00:14.0-1.2/input1"
E: PRODUCT=3/4d9/169/110
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=30893175
P: /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41/event3
N: input/event3
S: input/by-id/usb-04d9_USB_Keyboard-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:1.2:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-04d9_USB_Keyboard-event-if01 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.2:1.1-event
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:0169.0010/input/input41/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0169
E: ID_PATH=pci-0000:00:14.0-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_2_1_1
E: ID_REVISION=0209
E: ID_SERIAL=04d9_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=04d9
E: ID_VENDOR_ENC=04d9
E: ID_VENDOR_ID=04d9
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=30952886
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10
E: ABS=3273800000000003
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10
E: EV=b
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_4_1_0
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Touchscreen
E: ID_MODEL_ENC=Touchscreen
E: ID_MODEL_ID=2234
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=1111
E: ID_SERIAL=ELAN_Touchscreen
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=ELAN
E: ID_VENDOR_ENC=ELAN
E: ID_VENDOR_ID=04f3
E: KEY=400 0 0 0 0 0
E: MODALIAS=input:b0003v04F3p2234e0110-e0,1,3,k14A,ra0,1,2F,30,31,34,35,36,39,3C,3D,mlsfw
E: NAME="ELAN Touchscreen"
E: PHYS="usb-0000:00:14.0-4/input0"
E: PRODUCT=3/4f3/2234/110
E: PROP=2
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=717389
P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/event9
N: input/event9
S: input/by-id/usb-ELAN_Touchscreen-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event
E: DEVLINKS=/dev/input/by-id/usb-ELAN_Touchscreen-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/event9
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Touchscreen
E: ID_MODEL_ENC=Touchscreen
E: ID_MODEL_ID=2234
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=1111
E: ID_SERIAL=ELAN_Touchscreen
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=ELAN
E: ID_VENDOR_ENC=ELAN
E: ID_VENDOR_ID=04f3
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=717714
P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/mouse2
N: input/mouse2
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0007/input/input10/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Touchscreen
E: ID_MODEL_ENC=Touchscreen
E: ID_MODEL_ID=2234
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=1111
E: ID_SERIAL=ELAN_Touchscreen
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=ELAN
E: ID_VENDOR_ENC=ELAN
E: ID_VENDOR_ID=04f3
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=717551
P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_5_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=670c
E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0
E: ID_REVISION=5626
E: ID_SERIAL=CN09GTFM72487678B2X7A01_Integrated_Webcam_HD
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN09GTFM72487678B2X7A01
E: ID_VENDOR_ENC=CN09GTFM72487678B2X7A01
E: ID_VENDOR_ID=0c45
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v0C45p670Ce5626-e0,1,kD4,ramlsfw
E: NAME="Integrated_Webcam_HD"
E: PHYS="usb-0000:00:14.0-5/button"
E: PRODUCT=3/c45/670c/5626
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=728492
P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event11
N: input/event11
S: input/by-id/usb-CN09GTFM72487678B2X7A01_Integrated_Webcam_HD-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-CN09GTFM72487678B2X7A01_Integrated_Webcam_HD-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event11
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=670c
E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0
E: ID_REVISION=5626
E: ID_SERIAL=CN09GTFM72487678B2X7A01_Integrated_Webcam_HD
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN09GTFM72487678B2X7A01
E: ID_VENDOR_ENC=CN09GTFM72487678B2X7A01
E: ID_VENDOR_ID=0c45
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=728559
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15
E: ABS=260800000000003
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15
E: EV=b
E: ID_FOR_SEAT=input-pci-0000_00_15_1-platform-i2c_designware_1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: ID_SERIAL=noserial
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0018v06CBp76AEe0100-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,2F,35,36,39,mlsfw
E: NAME="DLL0704:01 06CB:76AE Touchpad"
E: PHYS="i2c-DLL0704:01"
E: PRODUCT=18/6cb/76ae/100
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=55541
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/event13
N: input/event13
S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/event13
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=55770
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/mouse3
N: input/mouse3
S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse
E: DEVNAME=/dev/input/mouse3
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0008/input/input15/mouse3
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=35
E: SUBSYSTEM=input
E: USEC_INITIALIZED=55645
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input17
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0001v10ECp0256e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/256/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=644504
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input17/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input17/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=645066
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=646208
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input18/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input18/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=646220
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input19
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=646237
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input19/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input19/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=646248
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input20
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=646263
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input20/event17
N: input/event17
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input20/event17
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=646274
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=646289
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input21/event18
N: input/event18
E: DEVNAME=/dev/input/event18
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input21/event18
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MAJOR=13
E: MINOR=82
E: SUBSYSTEM=input
E: USEC_INITIALIZED=646299
P: /devices/platform/i8042/serio0/input/input35
E: DEVPATH=/devices/platform/i8042/serio0/input/input35
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=971103944
P: /devices/platform/i8042/serio0/input/input35/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input35/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_81=playpause
E: KEYBOARD_KEY_82=stopcd
E: KEYBOARD_KEY_83=previoussong
E: KEYBOARD_KEY_84=nextsong
E: KEYBOARD_KEY_85=brightnessdown
E: KEYBOARD_KEY_86=brightnessup
E: KEYBOARD_KEY_87=battery
E: KEYBOARD_KEY_88=unknown
E: KEYBOARD_KEY_89=ejectclosecd
E: KEYBOARD_KEY_8F=switchvideomode
E: KEYBOARD_KEY_8a=suspend
E: KEYBOARD_KEY_8b=switchvideomode
E: KEYBOARD_KEY_8c=!unknown
E: KEYBOARD_KEY_90=previoussong
E: KEYBOARD_KEY_91=prog1
E: KEYBOARD_KEY_92=media
E: KEYBOARD_KEY_93=unknown
E: KEYBOARD_KEY_95=camera
E: KEYBOARD_KEY_97=email
E: KEYBOARD_KEY_98=f21
E: KEYBOARD_KEY_99=nextsong
E: KEYBOARD_KEY_9a=setup
E: KEYBOARD_KEY_9b=switchvideomode
E: KEYBOARD_KEY_9e=f21
E: KEYBOARD_KEY_a2=playpause
E: KEYBOARD_KEY_a4=stopcd
E: KEYBOARD_KEY_d8=screenlock
E: KEYBOARD_KEY_d9=f21
E: KEYBOARD_KEY_ed=media
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=971104736
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/pcspkr/input/input14
E: DEVPATH=/devices/platform/pcspkr/input/input14
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=732663
P: /devices/platform/pcspkr/input/input14/event12
N: input/event12
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/platform/pcspkr/input/input14/event12
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=732759
DRM Information from dmesg:
---------------------------
[ 1.201931] Linux agpgart interface v0.103
[ 10.573361] [drm] Initialized
[ 10.588086] [drm] Found 64MB of eDRAM
[ 10.588347] [drm] Memory usable by graphics device = 4096M
[ 10.588349] fb: switching to inteldrmfb from simple
[ 10.588464] [drm] Replacing VGA console driver
[ 10.594784] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.594785] [drm] Driver supports precise vblank timestamp query.
[ 10.606831] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[ 10.611750] [drm] GuC firmware load skipped
[ 10.619408] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 10.625912] fbcon: inteldrmfb (fb0) is primary device
[ 11.815413] [drm] RC6 on
[ 11.956642] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1196.700718] [drm] GuC firmware load skipped
[ 1197.852759] [drm] RC6 on
[ 7778.046373] [drm] GuC firmware load skipped
[ 7779.155156] [drm] RC6 on
[18578.565981] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[18578.606049] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[29252.077017] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[29252.117065] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[36806.030870] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[36806.069382] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[36943.827132] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[36943.865437] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to get link status
[37045.601398] [drm] GuC firmware load skipped
[37045.940610] [drm] RC6 on
[37061.381763] [drm] GuC firmware load skipped
[37062.858398] [drm] RC6 on
-- System Information:
Debian Release: 8.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.9.0 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to en_US.utf8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-18+deb8u6
ii libdrm-intel1 2.4.73-1~bpo8+1
ii libdrm2 2.4.73-1~bpo8+1
ii libpciaccess0 0.13.2-3+b1
ii libpixman-1-0 0.32.6-3
ii libudev1 215-17+deb8u5
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-dri3-0 1.10-3+b1
ii libxcb-sync1 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b2
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii libxshmfence1 1.1-4
ii libxss1 1:1.2.2-1
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.8-2+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: