[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#847229: xserver-xorg-video-intel: Xserver crashes when Option "AccelMethod" "sna" is enables in xorg.conf



Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20161105-1
Severity: normal

Dear Maintainer,

   * What led up to the situation?

In order to load the intel graphic driver as default I had to add an
/etc/X11/xorg.conf.d/09-intel.conf . With the default graphic driver settings
the XServer crashed.

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

I changed the Option "AccelMethod" to "uxa". When I change back to "sna" it
crashes again.

   * What was the outcome of this action?

Changing to "uxa" solved the problem. However, as far as I know sna is supposed
to replace uxa. Moreover, sna is default.

   * What outcome did you expect instead?

I would expect the XServer to work with default settings ;-)

I did a bit of bug tracking. First of all there is the XOrg log, which I
attached. Moreover, I was able to create a backtrace with help of the
following article:

https://www.x.org/wiki/Development/Documentation/ServerDebugging/

The backtrace is attached as well. Finally, there are a few info’s about my
system:
I am using a Lenovo T540p, which has an additional Nvidia graphic card. I use a
docking station with two monitors attached. The screen of the Lenovo is
deactivated.

Finally the package version is 2:2.99.917+git20161105-1

I hope this information might help.

Best,

Andreas




-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Nov 24 15:05 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Sep  6 15:09 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core
Processor Integrated Graphics Controller [8086:0416] (rev 06)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208M [GeForce GT
730M] [10de:1290] (rev a1)

/etc/X11/xorg.conf does not exist.

Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 121 Dec  6 17:12 09-intel.conf

/etc/modprobe.d contains no KMS configuration files.

Kernel version (/proc/version):
-------------------------------
Linux version 4.8.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1
20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.7-1 (2016-11-13)

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 gocht gocht  8023 Dec  6 16:29
/home/gocht/.local/share/xorg/Xorg.0.log
-rw-r--r-- 1 root  root   7814 Dec  6 16:50 /var/log/Xorg.1.log
-rw-r--r-- 1 gocht gocht  8022 Dec  6 17:05
/home/gocht/.local/share/xorg/Xorg.1.log
-rw-r--r-- 1 root  root  54652 Dec  6 17:13 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[    12.632] (--) Log file renamed from "/var/log/Xorg.pid-1207.log" to
"/var/log/Xorg.0.log"
[    12.633]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    12.633] X Protocol Version 11, Revision 0
[    12.633] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    12.633] Current Operating System: Linux andreas-ThinkPad 4.8.0-1-amd64 #1
SMP Debian 4.8.7-1 (2016-11-13) x86_64
[    12.633] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64
root=UUID=25f986e0-ac89-42c3-af8d-b11f367ff269 ro quiet
[    12.633] Build Date: 06 September 2016  01:32:44PM
[    12.633] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[    12.633] Current version of pixman: 0.34.0
[    12.633]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    12.633] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.633] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  6 17:13:27
2016
[    12.634] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    12.634] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.636] (==) No Layout section.  Using the first Screen section.
[    12.636] (==) No screen section available. Using defaults.
[    12.636] (**) |-->Screen "Default Screen Section" (0)
[    12.636] (**) |   |-->Monitor "<default monitor>"
[    12.637] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    12.637] (**) |   |-->Device "Intel"
[    12.637] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    12.637] (==) Automatically adding devices
[    12.637] (==) Automatically enabling devices
[    12.637] (==) Automatically adding GPU devices
[    12.637] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    12.641] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    12.641]    Entry deleted from font path.
[    12.648] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[    12.648] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.648] (II) The server relies on udev to provide the list of input
devices.
        If no devices become available, reconfigure udev or disable
AutoAddDevices.
[    12.648] (II) Loader magic: 0x5619b1fe6dc0
[    12.648] (II) Module ABI versions:
[    12.648]    X.Org ANSI C Emulation: 0.4
[    12.648]    X.Org Video Driver: 20.0
[    12.648]    X.Org XInput driver : 22.1
[    12.648]    X.Org Server Extension : 9.0
[    12.649] (++) using VT number 7

[    12.649] (II) systemd-logind: logind integration requires -keeptty and
-keeptty was not provided, disabling logind integration
[    12.650] (II) xfree86: Adding drm device (/dev/dri/card1)
[    13.104] (II) xfree86: Adding drm device (/dev/dri/card0)
[    13.116] (--) PCI:*(0:0:2:0) 8086:0416:17aa:221e rev 6, Mem @
0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @
0x????????/131072
[    13.116] (--) PCI: (0:1:0:0) 10de:1290:17aa:221e rev 161, Mem @
0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @
0x00004000/128
[    13.116] (II) LoadModule: "glx"
[    13.123] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.131] (II) Module glx: vendor="X.Org Foundation"
[    13.131]    compiled for 1.18.4, module version = 1.0.0
[    13.131]    ABI class: X.Org Server Extension, version 9.0
[    13.131] (==) AIGLX enabled
[    13.131] (II) LoadModule: "intel"
[    13.131] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    13.135] (II) Module intel: vendor="X.Org Foundation"
[    13.135]    compiled for 1.18.4, module version = 2.99.917
[    13.135]    Module class: X.Org Video Driver
[    13.135]    ABI class: X.Org Video Driver, version 20.0
[    13.135] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    13.135] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    13.135] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    13.135] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[    13.155] (II) intel(0): Creating default Display subsection in Screen
section
        "Default Screen Section" for depth/fbbpp 24/32
[    13.155] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    13.155] (==) intel(0): RGB weight 888
[    13.155] (==) intel(0): Default visual is TrueColor
[    13.155] (**) intel(0): Option "AccelMethod" "uxa"
[    13.155] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
4600
[    13.155] (**) intel(0): Relaxed fencing enabled
[    13.155] (**) intel(0): Wait on SwapBuffers? enabled
[    13.155] (**) intel(0): Triple buffering? enabled
[    13.155] (**) intel(0): Framebuffer tiled
[    13.155] (**) intel(0): Pixmaps tiled
[    13.155] (**) intel(0): 3D buffers tiled
[    13.156] (**) intel(0): SwapBuffers wait enabled
[    13.156] (==) intel(0): video overlay key set to 0x101fe
[    13.156] (II) intel(0): Output eDP1 has no monitor section
[    13.156] (--) intel(0): found backlight control interface intel_backlight
[    13.158] (II) intel(0): Output VGA1 has no monitor section
[    13.158] (II) intel(0): Output DP1 has no monitor section
[    13.444] (II) intel(0): Output HDMI1 has no monitor section
[    13.444] (II) intel(0): Output DP2 has no monitor section
[    13.445] (II) intel(0): Output HDMI2 has no monitor section
[    13.445] (II) intel(0): Output DP2-1 has no monitor section
[    13.488] (II) intel(0): Output DP2-2 has no monitor section
[    13.532] (II) intel(0): Output DP2-3 has no monitor section
[    13.534] (II) intel(0): EDID for output eDP1
[    13.534] (II) intel(0): Manufacturer: MEI  Model: 96a2  Serial#: 0
[    13.534] (II) intel(0): Year: 2013  Week: 255
[    13.534] (II) intel(0): EDID Version: 1.4
[    13.534] (II) intel(0): Digital Display Input
[    13.534] (II) intel(0): 8 bits per channel
[    13.534] (II) intel(0): Digital interface is DisplayPort
[    13.534] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    13.534] (II) intel(0): Gamma: 2.20
[    13.534] (II) intel(0): No DPMS capabilities specified
[    13.534] (II) intel(0): Supported color encodings: RGB 4:4:4
[    13.534] (II) intel(0): First detailed timing is preferred mode
[    13.534] (II) intel(0): Preferred mode is native pixel format and refresh
rate
[    13.534] (II) intel(0): redX: 0.652 redY: 0.329   greenX: 0.324 greenY:
0.600
[    13.534] (II) intel(0): blueX: 0.150 blueY: 0.045   whiteX: 0.312 whiteY:
0.329
[    13.534] (II) intel(0): Manufacturer's mask: 0
[    13.534] (II) intel(0): Supported detailed timing:
[    13.534] (II) intel(0): clock: 302.5 MHz   Image Size:  340 x 190 mm
[    13.534] (II) intel(0): h_active: 2880  h_sync: 2924  h_sync_end 2928
h_blank_end 3076 h_border: 0
[    13.534] (II) intel(0): v_active: 1620  v_sync: 1629  v_sync_end 1630
v_blanking: 1640 v_border: 0
[    13.534] (II) intel(0): Supported detailed timing:
[    13.534] (II) intel(0): clock: 302.5 MHz   Image Size:  340 x 190 mm
[    13.534] (II) intel(0): h_active: 2880  h_sync: 2924  h_sync_end 2928
h_blank_end 3076 h_border: 0
[    13.534] (II) intel(0): v_active: 1620  v_sync: 1629  v_sync_end 1630
v_blanking: 1967 v_border: 0
[    13.534] (II) intel(0): Ranges: V min: 49 V max: 61 Hz, H min: 96 H max:
100 kHz, PixClock max 305 MHz
[    13.534] (II) intel(0):  VVX16T028J00
[    13.534] (II) intel(0): EDID (in hex):
[    13.534] (II) intel(0):     00ffffffffffff0034a9a29600000000
[    13.534] (II) intel(0):     ff170104a52213780212a1a754539926
[    13.534] (II) intel(0):     0b505400000001010101010101010101
[    13.534] (II) intel(0):     0101010101012a7640c4b05414602c04
[    13.534] (II) intel(0):     910058c11000001e2a7640c4b0545b61
[    13.534] (II) intel(0):     2c04910058c11000001e000000fd0031
[    13.534] (II) intel(0):     3d60641e010a202020202020000000fe
[    13.534] (II) intel(0):     005656583136543032384a30300a0050
[    13.534] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "896x672" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "928x696" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "960x720" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "576x432" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "720x450" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "800x512" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "960x540" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "960x600" (doublescan mode
not supported)
[    13.534] (II) intel(0): Not using default mode "1024x768" (doublescan mode
not supported)
[    13.534] (II) intel(0): Printing probed modes for output eDP1
[    13.534] (II) intel(0): Modeline "2880x1620"x60.0  302.50  2880 2924 2928
3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[    13.534] (II) intel(0): Modeline "2880x1620"x50.0  302.50  2880 2924 2928
3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[    13.534] (II) intel(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424
2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    13.534] (II) intel(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256
2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    13.534] (II) intel(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176
2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    13.534] (II) intel(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120
2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    13.534] (II) intel(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000
2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[    13.534] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000
2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    13.534] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856
2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    13.534] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960
2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    13.534] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760
1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    13.534] (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656
1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    13.534] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640
1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    13.534] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    13.534] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672
1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    13.534] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488
1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    13.534] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568
1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    13.534] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440
1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    13.534] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336
1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    13.534] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    13.534] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[    13.534] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[    13.534] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[    13.536] (II) intel(0): EDID for output VGA1
[    13.536] (II) intel(0): EDID for output DP1
[    13.792] (II) intel(0): EDID for output HDMI1
[    13.792] (II) intel(0): EDID for output DP2
[    13.793] (II) intel(0): EDID for output HDMI2
[    13.793] (II) intel(0): EDID for output DP2-1
[    13.836] (II) intel(0): EDID for output DP2-2
[    13.836] (II) intel(0): Manufacturer: GSM  Model: 5a49  Serial#: 159254
[    13.836] (II) intel(0): Year: 2014  Week: 12
[    13.836] (II) intel(0): EDID Version: 1.3
[    13.836] (II) intel(0): Digital Display Input
[    13.836] (II) intel(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    13.836] (II) intel(0): Gamma: 2.20
[    13.836] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    13.836] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    13.836] (II) intel(0): First detailed timing is preferred mode
[    13.836] (II) intel(0): redX: 0.638 redY: 0.334   greenX: 0.309 greenY:
0.627
[    13.836] (II) intel(0): blueX: 0.153 blueY: 0.073   whiteX: 0.313 whiteY:
0.329
[    13.836] (II) intel(0): Supported established timings:
[    13.836] (II) intel(0): 720x400@70Hz
[    13.836] (II) intel(0): 640x480@60Hz
[    13.836] (II) intel(0): 640x480@75Hz
[    13.836] (II) intel(0): 800x600@56Hz
[    13.836] (II) intel(0): 800x600@60Hz
[    13.836] (II) intel(0): 800x600@75Hz
[    13.836] (II) intel(0): 832x624@75Hz
[    13.836] (II) intel(0): 1024x768@60Hz
[    13.836] (II) intel(0): 1024x768@75Hz
[    13.836] (II) intel(0): 1280x1024@75Hz
[    13.836] (II) intel(0): 1152x864@75Hz
[    13.836] (II) intel(0): Manufacturer's mask: 0
[    13.836] (II) intel(0): Supported standard timings:
[    13.836] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    13.836] (II) intel(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    13.836] (II) intel(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    13.836] (II) intel(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid:
32897
[    13.836] (II) intel(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    13.836] (II) intel(0): #5: hsize: 1400  vsize 1050  refresh: 60  vid:
16528
[    13.836] (II) intel(0): #6: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    13.836] (II) intel(0): #7: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    13.836] (II) intel(0): Supported detailed timing:
[    13.836] (II) intel(0): clock: 148.5 MHz   Image Size:  510 x 290 mm
[    13.836] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052
h_blank_end 2200 h_border: 0
[    13.836] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089
v_blanking: 1125 v_border: 0
[    13.836] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83
kHz, PixClock max 155 MHz
[    13.836] (II) intel(0): Monitor name: 24MB35
[    13.836] (II) intel(0): Serial No: 412NDSK4P254
[    13.836] (II) intel(0): EDID (in hex):
[    13.836] (II) intel(0):     00ffffffffffff001e6d495a166e0200
[    13.836] (II) intel(0):     0c18010380331d78ea6275a3554fa027
[    13.836] (II) intel(0):     125054a76b80714f81c0810081809500
[    13.836] (II) intel(0):     9040a9c0b300023a801871382d40582c
[    13.836] (II) intel(0):     4500fe221100001e000000fd00384b1e
[    13.836] (II) intel(0):     530f000a202020202020000000fc0032
[    13.836] (II) intel(0):     344d4233350a202020202020000000ff
[    13.836] (II) intel(0):     003431324e44534b34503235340a00e9
[    13.836] (II) intel(0): Printing probed modes for output DP2-2
[    13.836] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052
2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    13.836] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760
1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    13.836] (II) intel(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480
1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[    13.836] (II) intel(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704
1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    13.836] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440
1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.836] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    13.836] (II) intel(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520
1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    13.836] (II) intel(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360
1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    13.836] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344
1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.836] (II) intel(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430
1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.836] (II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136
1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.836] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.836] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.836] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.836] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.836] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.836] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.836] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.836] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.885] (II) intel(0): EDID for output DP2-3
[    13.885] (II) intel(0): Manufacturer: GSM  Model: 5a48  Serial#: 159256
[    13.885] (II) intel(0): Year: 2014  Week: 12
[    13.885] (II) intel(0): EDID Version: 1.3
[    13.885] (II) intel(0): Analog Display Input,  Input Voltage Level:
0.700/0.700 V
[    13.885] (II) intel(0): Sync:  Separate  Composite
[    13.885] (II) intel(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[    13.885] (II) intel(0): Gamma: 2.20
[    13.885] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
[    13.885] (II) intel(0): First detailed timing is preferred mode
[    13.885] (II) intel(0): redX: 0.638 redY: 0.334   greenX: 0.309 greenY:
0.627
[    13.885] (II) intel(0): blueX: 0.153 blueY: 0.073   whiteX: 0.313 whiteY:
0.329
[    13.885] (II) intel(0): Supported established timings:
[    13.885] (II) intel(0): 720x400@70Hz
[    13.885] (II) intel(0): 640x480@60Hz
[    13.885] (II) intel(0): 640x480@75Hz
[    13.885] (II) intel(0): 800x600@56Hz
[    13.885] (II) intel(0): 800x600@60Hz
[    13.885] (II) intel(0): 800x600@75Hz
[    13.885] (II) intel(0): 832x624@75Hz
[    13.885] (II) intel(0): 1024x768@60Hz
[    13.885] (II) intel(0): 1024x768@75Hz
[    13.885] (II) intel(0): 1280x1024@75Hz
[    13.885] (II) intel(0): 1152x864@75Hz
[    13.885] (II) intel(0): Manufacturer's mask: 0
[    13.885] (II) intel(0): Supported standard timings:
[    13.885] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    13.885] (II) intel(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    13.885] (II) intel(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    13.885] (II) intel(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid:
32897
[    13.885] (II) intel(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    13.885] (II) intel(0): #5: hsize: 1400  vsize 1050  refresh: 60  vid:
16528
[    13.885] (II) intel(0): #6: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    13.885] (II) intel(0): #7: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    13.885] (II) intel(0): Supported detailed timing:
[    13.885] (II) intel(0): clock: 148.5 MHz   Image Size:  510 x 290 mm
[    13.885] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052
h_blank_end 2200 h_border: 0
[    13.885] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089
v_blanking: 1125 v_border: 0
[    13.885] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83
kHz, PixClock max 155 MHz
[    13.885] (II) intel(0): Monitor name: 24MB35
[    13.885] (II) intel(0): Serial No: 412NDLS4P256
[    13.885] (II) intel(0): EDID (in hex):
[    13.885] (II) intel(0):     00ffffffffffff001e6d485a186e0200
[    13.885] (II) intel(0):     0c1801036c331d78ea6275a3554fa027
[    13.885] (II) intel(0):     125054a76b80714f81c0810081809500
[    13.885] (II) intel(0):     9040a9c0b300023a801871382d40582c
[    13.885] (II) intel(0):     4500fe221100001e000000fd00384b1e
[    13.885] (II) intel(0):     530f000a202020202020000000fc0032
[    13.885] (II) intel(0):     344d4233350a202020202020000000ff
[    13.885] (II) intel(0):     003431324e444c5334503235360a00f9
[    13.885] (II) intel(0): Printing probed modes for output DP2-3
[    13.885] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052
2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    13.885] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960
2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    13.885] (II) intel(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632
1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    13.885] (II) intel(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704
1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    13.885] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440
1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.885] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    13.885] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672
1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    13.885] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480
1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    13.885] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344
1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.885] (II) intel(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430
1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    13.885] (II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136
1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.885] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.885] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.885] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.885] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.885] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.885] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.885] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.885] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.885] (II) intel(0): Output eDP1 connected
[    13.885] (II) intel(0): Output VGA1 disconnected
[    13.885] (II) intel(0): Output DP1 disconnected
[    13.885] (II) intel(0): Output HDMI1 disconnected
[    13.885] (II) intel(0): Output DP2 disconnected
[    13.885] (II) intel(0): Output HDMI2 disconnected
[    13.885] (II) intel(0): Output DP2-1 disconnected
[    13.885] (II) intel(0): Output DP2-2 connected
[    13.885] (II) intel(0): Output DP2-3 connected
[    13.885] (II) intel(0): Using spanning desktop for initial modes
[    13.885] (II) intel(0): Output eDP1 using initial mode 2880x1620 +0+0
[    13.885] (II) intel(0): Output DP2-2 using initial mode 1920x1080 +2880+0
[    13.885] (II) intel(0): Output DP2-3 using initial mode 1920x1080 +4800+0
[    13.885] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[    13.885] (II) intel(0): Kernel page flipping support detected, enabling
[    13.885] (==) intel(0): DPI set to (96, 96)
[    13.885] (II) Loading sub module "fb"
[    13.885] (II) LoadModule: "fb"
[    13.886] (II) Loading /usr/lib/xorg/modules/libfb.so
[    13.894] (II) Module fb: vendor="X.Org Foundation"
[    13.894]    compiled for 1.18.4, module version = 1.0.0
[    13.894]    ABI class: X.Org ANSI C Emulation, version 0.4
[    13.894] (II) Loading sub module "dri2"
[    13.894] (II) LoadModule: "dri2"
[    13.894] (II) Module "dri2" already built-in
[    13.894] (==) Depth 24 pixmap format is 32 bpp
[    13.894] (II) intel(0): Allocated new frame buffer 6720x1620 stride 27136,
tiled
[    13.896] (II) UXA(0): Driver registered support for the following
operations:
[    13.896] (II)         solid
[    13.896] (II)         copy
[    13.896] (II)         composite (RENDER acceleration)
[    13.896] (II)         put_image
[    13.896] (II)         get_image
[    13.896] (II) intel(0): [DRI2] Setup complete
[    13.896] (II) intel(0): [DRI2]   DRI driver: i965
[    13.896] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    13.896] (==) intel(0): Backing store enabled
[    13.896] (==) intel(0): Silken mouse enabled
[    13.896] (II) intel(0): Initializing HW Cursor
[    13.896] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[    13.897] (==) intel(0): DPMS enabled
[    13.897] (==) intel(0): Intel XvMC decoder enabled
[    13.897] (II) intel(0): Set up textured video
[    13.897] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    13.897] (II) intel(0): DRI2: Enabled
[    13.897] (II) intel(0): DRI3: Disabled
[    13.897] (==) intel(0): hotplug detection: "enabled"
[    13.980] (--) RandR disabled
[    13.982] (II) SELinux: Disabled on system
[    14.001] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    14.001] (II) AIGLX: enabled GLX_ARB_create_context
[    14.001] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    14.001] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    14.001] (II) AIGLX: enabled GLX_INTEL_swap_event
[    14.001] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    14.001] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    14.001] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    14.001] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    14.001] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    14.001] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    14.001] (II) AIGLX: Loaded and initialized i965
[    14.001] (II) GLX: Initialized DRI2 GL provider for screen 0
[    14.001] (II) intel(0): Setting screen physical size to 1778 x 428
[    14.042] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[    14.042] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    14.042] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[    14.042] (II) LoadModule: "libinput"
[    14.042] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    14.046] (II) Module libinput: vendor="X.Org Foundation"
[    14.046]    compiled for 1.18.4, module version = 0.22.0
[    14.046]    Module class: X.Org XInput Driver
[    14.046]    ABI class: X.Org XInput driver, version 22.1
[    14.046] (II) Using input driver 'libinput' for 'Power Button'
[    14.046] (**) Power Button: always reports core events
[    14.046] (**) Option "Device" "/dev/input/event4"
[    14.046] (**) Option "_source" "server/udev"
[    14.046] (II) input device 'Power Button', /dev/input/event4 is tagged by
udev as: Keyboard
[    14.046] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    14.068] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[    14.068] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[    14.068] (**) Option "xkb_model" "pc105"
[    14.068] (**) Option "xkb_layout" "de"
[    14.082] (II) input device 'Power Button', /dev/input/event4 is tagged by
udev as: Keyboard
[    14.082] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    14.082] (II) config/udev: Adding input device Video Bus
(/dev/input/event12)
[    14.082] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    14.082] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    14.082] (II) Using input driver 'libinput' for 'Video Bus'
[    14.082] (**) Video Bus: always reports core events
[    14.082] (**) Option "Device" "/dev/input/event12"
[    14.082] (**) Option "_source" "server/udev"
[    14.083] (II) input device 'Video Bus', /dev/input/event12 is tagged by
udev as: Keyboard
[    14.083] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[    14.100] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event12"
[    14.100] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[    14.100] (**) Option "xkb_model" "pc105"
[    14.100] (**) Option "xkb_layout" "de"
[    14.100] (II) input device 'Video Bus', /dev/input/event12 is tagged by
udev as: Keyboard
[    14.100] (II) input device 'Video Bus', /dev/input/event12 is a keyboard
[    14.100] (II) config/udev: Adding input device Video Bus
(/dev/input/event13)
[    14.100] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    14.100] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    14.100] (II) Using input driver 'libinput' for 'Video Bus'
[    14.100] (**) Video Bus: always reports core events
[    14.100] (**) Option "Device" "/dev/input/event13"
[    14.100] (**) Option "_source" "server/udev"
[    14.101] (II) input device 'Video Bus', /dev/input/event13 is tagged by
udev as: Keyboard
[    14.101] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[    14.128] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input15/event13"
[    14.128] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 8)
[    14.128] (**) Option "xkb_model" "pc105"
[    14.128] (**) Option "xkb_layout" "de"
[    14.128] (II) input device 'Video Bus', /dev/input/event13 is tagged by
udev as: Keyboard
[    14.128] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[    14.129] (II) config/udev: Adding input device Lid Switch
(/dev/input/event2)
[    14.129] (II) No input driver specified, ignoring this device.
[    14.129] (II) This device may have been added with another device file.
[    14.129] (II) config/udev: Adding input device Sleep Button
(/dev/input/event3)
[    14.129] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    14.129] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[    14.129] (II) Using input driver 'libinput' for 'Sleep Button'
[    14.129] (**) Sleep Button: always reports core events
[    14.129] (**) Option "Device" "/dev/input/event3"
[    14.129] (**) Option "_source" "server/udev"
[    14.129] (II) input device 'Sleep Button', /dev/input/event3 is tagged by
udev as: Keyboard
[    14.129] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    14.144] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event3"
[    14.144] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD, id 9)
[    14.144] (**) Option "xkb_model" "pc105"
[    14.144] (**) Option "xkb_layout" "de"
[    14.144] (II) input device 'Sleep Button', /dev/input/event3 is tagged by
udev as: Keyboard
[    14.144] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    14.144] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3
(/dev/input/event15)
[    14.144] (II) No input driver specified, ignoring this device.
[    14.144] (II) This device may have been added with another device file.
[    14.145] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7
(/dev/input/event16)
[    14.145] (II) No input driver specified, ignoring this device.
[    14.145] (II) This device may have been added with another device file.
[    14.145] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8
(/dev/input/event17)
[    14.145] (II) No input driver specified, ignoring this device.
[    14.145] (II) This device may have been added with another device file.
[    14.145] (II) config/udev: Adding input device Integrated Camera
(/dev/input/event18)
[    14.145] (**) Integrated Camera: Applying InputClass "evdev keyboard
catchall"
[    14.145] (**) Integrated Camera: Applying InputClass "libinput keyboard
catchall"
[    14.145] (II) Using input driver 'libinput' for 'Integrated Camera'
[    14.145] (**) Integrated Camera: always reports core events
[    14.145] (**) Option "Device" "/dev/input/event18"
[    14.145] (**) Option "_source" "server/udev"
[    14.145] (II) input device 'Integrated Camera', /dev/input/event18 is
tagged by udev as: Keyboard
[    14.145] (II) input device 'Integrated Camera', /dev/input/event18 is a
keyboard
[    14.176] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/input/input19/event18"
[    14.176] (II) XINPUT: Adding extended input device "Integrated Camera"
(type: KEYBOARD, id 10)
[    14.176] (**) Option "xkb_model" "pc105"
[    14.176] (**) Option "xkb_layout" "de"
[    14.177] (II) input device 'Integrated Camera', /dev/input/event18 is
tagged by udev as: Keyboard
[    14.177] (II) input device 'Integrated Camera', /dev/input/event18 is a
keyboard
[    14.178] (II) config/udev: Adding input device HID 046a:0023
(/dev/input/event19)
[    14.178] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall"
[    14.178] (**) HID 046a:0023: Applying InputClass "libinput keyboard
catchall"
[    14.178] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    14.178] (**) HID 046a:0023: always reports core events
[    14.178] (**) Option "Device" "/dev/input/event19"
[    14.178] (**) Option "_source" "server/udev"
[    14.179] (II) input device 'HID 046a:0023', /dev/input/event19 is tagged by
udev as: Keyboard
[    14.179] (II) input device 'HID 046a:0023', /dev/input/event19 is a
keyboard
[    14.192] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.0/0003:046A:0023.0001/input/input20/event19"
[    14.192] (II) XINPUT: Adding extended input device "HID 046a:0023" (type:
KEYBOARD, id 11)
[    14.192] (**) Option "xkb_model" "pc105"
[    14.192] (**) Option "xkb_layout" "de"
[    14.193] (II) input device 'HID 046a:0023', /dev/input/event19 is tagged by
udev as: Keyboard
[    14.193] (II) input device 'HID 046a:0023', /dev/input/event19 is a
keyboard
[    14.194] (II) config/udev: Adding input device HID 046a:0023
(/dev/input/event21)
[    14.194] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall"
[    14.194] (**) HID 046a:0023: Applying InputClass "libinput keyboard
catchall"
[    14.194] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    14.194] (**) HID 046a:0023: always reports core events
[    14.194] (**) Option "Device" "/dev/input/event21"
[    14.194] (**) Option "_source" "server/udev"
[    14.195] (II) input device 'HID 046a:0023', /dev/input/event21 is tagged by
udev as: Keyboard
[    14.195] (II) input device 'HID 046a:0023', /dev/input/event21 is a
keyboard
[    14.208] (II) libinput: HID 046a:0023: needs a virtual subdevice
[    14.208] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.1/0003:046A:0023.0002/input/input22/event21"
[    14.208] (II) XINPUT: Adding extended input device "HID 046a:0023" (type:
MOUSE, id 12)
[    14.208] (**) Option "AccelerationScheme" "none"
[    14.208] (**) HID 046a:0023: (accel) selected scheme none/0
[    14.208] (**) HID 046a:0023: (accel) acceleration factor: 2.000
[    14.208] (**) HID 046a:0023: (accel) acceleration threshold: 4
[    14.209] (II) input device 'HID 046a:0023', /dev/input/event21 is tagged by
udev as: Keyboard
[    14.209] (II) input device 'HID 046a:0023', /dev/input/event21 is a
keyboard
[    14.210] (II) config/udev: Adding input device Logitech USB Optical Mouse
(/dev/input/event20)
[    14.210] (**) Logitech USB Optical Mouse: Applying InputClass "evdev
pointer catchall"
[    14.210] (**) Logitech USB Optical Mouse: Applying InputClass "libinput
pointer catchall"
[    14.210] (II) Using input driver 'libinput' for 'Logitech USB Optical
Mouse'
[    14.210] (**) Logitech USB Optical Mouse: always reports core events
[    14.210] (**) Option "Device" "/dev/input/event20"
[    14.210] (**) Option "_source" "server/udev"
[    14.268] (II) input device 'Logitech USB Optical Mouse', /dev/input/event20
is tagged by udev as: Mouse
[    14.268] (II) input device 'Logitech USB Optical Mouse', /dev/input/event20
is a pointer caps
[    14.300] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.2/2-9.4.2:1.0/0003:046D:C077.0003/input/input21/event20"
[    14.300] (II) XINPUT: Adding extended input device "Logitech USB Optical
Mouse" (type: MOUSE, id 13)
[    14.300] (**) Option "AccelerationScheme" "none"
[    14.300] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[    14.300] (**) Logitech USB Optical Mouse: (accel) acceleration factor:
2.000
[    14.300] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    14.360] (II) input device 'Logitech USB Optical Mouse', /dev/input/event20
is tagged by udev as: Mouse
[    14.360] (II) input device 'Logitech USB Optical Mouse', /dev/input/event20
is a pointer caps
[    14.362] (II) config/udev: Adding input device Logitech USB Optical Mouse
(/dev/input/mouse2)
[    14.362] (II) No input driver specified, ignoring this device.
[    14.362] (II) This device may have been added with another device file.
[    14.362] (II) config/udev: Adding input device HDA Intel PCH Dock Mic
(/dev/input/event8)
[    14.362] (II) No input driver specified, ignoring this device.
[    14.362] (II) This device may have been added with another device file.
[    14.363] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event9)
[    14.363] (II) No input driver specified, ignoring this device.
[    14.363] (II) This device may have been added with another device file.
[    14.363] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone
(/dev/input/event10)
[    14.363] (II) No input driver specified, ignoring this device.
[    14.363] (II) This device may have been added with another device file.
[    14.364] (II) config/udev: Adding input device HDA Intel PCH Headphone
(/dev/input/event11)
[    14.364] (II) No input driver specified, ignoring this device.
[    14.364] (II) This device may have been added with another device file.
[    14.364] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event7)
[    14.364] (II) No input driver specified, ignoring this device.
[    14.364] (II) This device may have been added with another device file.
[    14.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[    14.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[    14.365] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput
keyboard catchall"
[    14.365] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[    14.365] (**) AT Translated Set 2 keyboard: always reports core events
[    14.365] (**) Option "Device" "/dev/input/event0"
[    14.365] (**) Option "_source" "server/udev"
[    14.366] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is tagged by udev as: Keyboard
[    14.366] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is a keyboard
[    14.412] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    14.412] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 14)
[    14.412] (**) Option "xkb_model" "pc105"
[    14.412] (**) Option "xkb_layout" "de"
[    14.413] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is tagged by udev as: Keyboard
[    14.413] (II) input device 'AT Translated Set 2 keyboard',
/dev/input/event0 is a keyboard
[    14.413] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event1)
[    14.413] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[    14.413] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput
touchpad catchall"
[    14.413] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[    14.413] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default
clickpad buttons"
[    14.413] (II) LoadModule: "synaptics"
[    14.414] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    14.422] (II) Module synaptics: vendor="X.Org Foundation"
[    14.422]    compiled for 1.18.4, module version = 1.9.0
[    14.422]    Module class: X.Org XInput Driver
[    14.422]    ABI class: X.Org XInput driver, version 22.1
[    14.422] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[    14.422] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    14.422] (**) Option "Device" "/dev/input/event1"
[    14.452] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad
property
[    14.452] (II) synaptics: SynPS/2 Synaptics TouchPad: found top buttonpad
property
[    14.452] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 -
5674 (res 41)
[    14.452] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1170 -
4684 (res 37)
[    14.452] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    14.452] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 -
15
[    14.452] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double
triple
[    14.452] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    14.452] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    14.452] (**) Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
[    14.452] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    14.452] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    14.484] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    14.484] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD, id 15)
[    14.484] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is
now constant deceleration 2.5
[    14.484] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is
now 1.75
[    14.484] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is
now 0.035
[    14.484] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
scheme 1
[    14.484] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    14.484] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor:
2.000
[    14.484] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    14.484] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    14.485] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[    14.485] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass
"touchpad ignore duplicates"
[    14.486] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/event14)
[    14.486] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer
catchall"
[    14.486] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer
catchall"
[    14.486] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    14.486] (**) TPPS/2 IBM TrackPoint: always reports core events
[    14.486] (**) Option "Device" "/dev/input/event14"
[    14.486] (**) Option "_source" "server/udev"
[    14.486] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event14 is
tagged by udev as: Mouse Pointingstick
[    14.486] (II) Device 'TPPS/2 IBM TrackPoint' set to const accel 1.00
[    14.486] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event14 is a
pointer caps
[    14.516] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/serio2/input/input3/event14"
[    14.516] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint"
(type: MOUSE, id 16)
[    14.516] (**) Option "AccelerationScheme" "none"
[    14.516] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    14.516] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    14.516] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    14.517] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event14 is
tagged by udev as: Mouse Pointingstick
[    14.517] (II) Device 'TPPS/2 IBM TrackPoint' set to const accel 1.00
[    14.517] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event14 is a
pointer caps
[    14.517] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint
(/dev/input/mouse1)
[    14.517] (II) No input driver specified, ignoring this device.
[    14.517] (II) This device may have been added with another device file.
[    14.518] (II) config/udev: Adding input device PC Speaker
(/dev/input/event6)
[    14.518] (II) No input driver specified, ignoring this device.
[    14.518] (II) This device may have been added with another device file.
[    14.518] (II) config/udev: Adding input device ThinkPad Extra Buttons
(/dev/input/event5)
[    14.518] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard
catchall"
[    14.518] (**) ThinkPad Extra Buttons: Applying InputClass "libinput
keyboard catchall"
[    14.518] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    14.518] (**) ThinkPad Extra Buttons: always reports core events
[    14.518] (**) Option "Device" "/dev/input/event5"
[    14.518] (**) Option "_source" "server/udev"
[    14.519] (II) input device 'ThinkPad Extra Buttons', /dev/input/event5 is
tagged by udev as: Keyboard
[    14.519] (II) input device 'ThinkPad Extra Buttons', /dev/input/event5 is a
keyboard
[    14.532] (**) Option "config_info"
"udev:/sys/devices/platform/thinkpad_acpi/input/input7/event5"
[    14.532] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons"
(type: KEYBOARD, id 17)
[    14.532] (**) Option "xkb_model" "pc105"
[    14.532] (**) Option "xkb_layout" "de"
[    14.533] (II) input device 'ThinkPad Extra Buttons', /dev/input/event5 is
tagged by udev as: Keyboard
[    14.533] (II) input device 'ThinkPad Extra Buttons', /dev/input/event5 is a
keyboard
[    14.563] (**) HID 046a:0023: Applying InputClass "evdev keyboard catchall"
[    14.563] (**) HID 046a:0023: Applying InputClass "libinput keyboard
catchall"
[    14.563] (II) Using input driver 'libinput' for 'HID 046a:0023'
[    14.563] (**) HID 046a:0023: always reports core events
[    14.563] (**) Option "Device" "/dev/input/event21"
[    14.563] (**) Option "_source" "_driver/libinput"
[    14.563] (II) libinput: HID 046a:0023: is a virtual subdevice
[    14.563] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.1/0003:046A:0023.0002/input/input22/event21"
[    14.563] (II) XINPUT: Adding extended input device "HID 046a:0023" (type:
KEYBOARD, id 18)
[    14.563] (**) Option "xkb_model" "pc105"
[    14.563] (**) Option "xkb_layout" "de"
[    20.100] (II) intel(0): EDID vendor "GSM", prod id 23112
[    20.100] (II) intel(0): Using EDID range info for horizontal sync
[    20.100] (II) intel(0): Using EDID range info for vertical refresh
[    20.100] (II) intel(0): Printing DDC gathered Modelines:
[    20.100] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052
2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    20.100] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[    20.100] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[    20.100] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[    20.100] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[    20.100] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[    20.100] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440
1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    20.100] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136
1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    20.100] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    20.100] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[    20.100] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[    20.100] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344
1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    20.100] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472
1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    20.100] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480
1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    20.100] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    20.100] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672
1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    20.100] (II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632
1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    20.100] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864
2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    20.100] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960
2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    20.681] (II) intel(0): Allocated new frame buffer 3840x1080 stride 15360,
tiled
[    21.789] (II) intel(0): EDID vendor "GSM", prod id 23112
[    21.789] (II) intel(0): Using hsync ranges from config file
[    21.789] (II) intel(0): Using vrefresh ranges from config file
[    21.789] (II) intel(0): Printing DDC gathered Modelines:
[    21.789] (II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052
2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    21.789] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.789] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.789] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[    21.789] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[    21.789] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[    21.789] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440
1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    21.789] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136
1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    21.789] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.789] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz e)
[    21.789] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[    21.789] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344
1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    21.789] (II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472
1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    21.789] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480
1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    21.789] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440
1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    21.789] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672
1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    21.789] (II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632
1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    21.789] (II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864
2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    21.789] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960
2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    21.924] (II) intel(0): Allocated new frame buffer 3840x1080 stride 15360,
tiled

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2722228

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2865168
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2773099

P:
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event12
N: input/event12
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event12
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event12
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2863426
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P:
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input15
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input15
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_01
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2776060

P:
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input15/event13
N: input/event13
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event13
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input15/event13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2864965
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=2721611

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2865439

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2722232

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2854748
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=3891943

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3926085

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=3898741

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3929888

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=3898881

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18/event17
N: input/event17
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18/event17
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3965678

P: /devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/input/input19
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/input/input19
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_12_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=b39a
E: ID_PATH=pci-0000:00:14.0-usb-0:12:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_12_1_0
E: ID_REVISION=2603
E: ID_SERIAL=SunplusIT_INC._Integrated_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_INC.
E: ID_VENDOR_ENC=SunplusIT\x20INC.
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB39Ae2603-e0,1,kD4,ramlsfw
E: NAME="Integrated Camera"
E: PHYS="usb-0000:00:14.0-12/button"
E: PRODUCT=3/4f2/b39a/2603
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3902629

P: /devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/input/input19/event18
N: input/event18
S: input/by-id/usb-SunplusIT_INC._Integrated_Camera-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:12:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:12:1.0-event /dev/input
/by-id/usb-SunplusIT_INC._Integrated_Camera-event-if00
E: DEVNAME=/dev/input/event18
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/input/input19/event18
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=b39a
E: ID_PATH=pci-0000:00:14.0-usb-0:12:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_12_1_0
E: ID_REVISION=2603
E: ID_SERIAL=SunplusIT_INC._Integrated_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_INC.
E: ID_VENDOR_ENC=SunplusIT\x20INC.
E: ID_VENDOR_ID=04f2
E: LIBINPUT_DEVICE_GROUP=3/4f2/b39a/2603:usb-0000:00:14.0-12/button
E: MAJOR=13
E: MINOR=82
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3990412
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P:
/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.0/0003:046A:0023.0001/input/input20
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.0/0003:046A:0023.0001/input/input20
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_9_4_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=0023
E: ID_MODEL_ENC=0023
E: ID_MODEL_ID=0023
E: ID_PATH=pci-0000:00:14.0-usb-0:9.4.1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9_4_1_1_0
E: ID_REVISION=0220
E: ID_SERIAL=046a_0023
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=046a
E: ID_VENDOR_ENC=046a
E: ID_VENDOR_ID=046a
E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
E: LED=7
E:
MODALIAS=input:b0003v046Ap0023e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="HID 046a:0023"
E: PHYS="usb-0000:00:14.0-9.4.1/input0"
E: PRODUCT=3/46a/23/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4318147

P:
/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.0/0003:046A:0023.0001/input/input20/event19
N: input/event19
S: input/by-id/usb-046a_0023-event-kbd
S: input/by-path/pci-0000:00:14.0-usb-0:9.4.1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-046a_0023-event-kbd /dev/input/by-
path/pci-0000:00:14.0-usb-0:9.4.1:1.0-event-kbd
E: DEVNAME=/dev/input/event19
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.0/0003:046A:0023.0001/input/input20/event19
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=0023
E: ID_MODEL_ENC=0023
E: ID_MODEL_ID=0023
E: ID_PATH=pci-0000:00:14.0-usb-0:9.4.1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9_4_1_1_0
E: ID_REVISION=0220
E: ID_SERIAL=046a_0023
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=046a
E: ID_VENDOR_ENC=046a
E: ID_VENDOR_ID=046a
E: LIBINPUT_DEVICE_GROUP=3/46a/23/111:usb-0000:00:14.0-9.4
E: MAJOR=13
E: MINOR=83
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4342668
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P:
/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.1/0003:046A:0023.0002/input/input22
E: ABS=100000000
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.1/0003:046A:0023.0002/input/input22
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_9_4_1_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=0023
E: ID_MODEL_ENC=0023
E: ID_MODEL_ID=0023
E: ID_PATH=pci-0000:00:14.0-usb-0:9.4.1:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9_4_1_1_1
E: ID_REVISION=0220
E: ID_SERIAL=046a_0023
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=046a
E: ID_VENDOR_ENC=046a
E: ID_VENDOR_ID=046a
E: KEY=3f0003007f 0 0 483ffff17aff32d bf54444600000000 1 130f938b17c400
677bfad971dfed 9ed68000004400 10000002
E:
MODALIAS=input:b0003v046Ap0023e0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,94,95,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,CA,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E7,E8,E9,EA,EB,F0,F1,F4,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,250,251,260,261,262,263,264,265,r6,a20,m4,lsfw
E: MSC=10
E: NAME="HID 046a:0023"
E: PHYS="usb-0000:00:14.0-9.4.1/input1"
E: PRODUCT=3/46a/23/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4318197

P:
/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.1/0003:046A:0023.0002/input/input22/event21
N: input/event21
S: input/by-id/usb-046a_0023-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:9.4.1:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:9.4.1:1.1-event
/dev/input/by-id/usb-046a_0023-event-if01
E: DEVNAME=/dev/input/event21
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.1/2-9.4.1:1.1/0003:046A:0023.0002/input/input22/event21
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=0023
E: ID_MODEL_ENC=0023
E: ID_MODEL_ID=0023
E: ID_PATH=pci-0000:00:14.0-usb-0:9.4.1:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9_4_1_1_1
E: ID_REVISION=0220
E: ID_SERIAL=046a_0023
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=046a
E: ID_VENDOR_ENC=046a
E: ID_VENDOR_ID=046a
E: LIBINPUT_DEVICE_GROUP=3/46a/23/111:usb-0000:00:14.0-9.4
E: MAJOR=13
E: MINOR=85
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4354358
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P:
/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.2/2-9.4.2:1.0/0003:046D:C077.0003/input/input21
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.2/2-9.4.2:1.0/0003:046D:C077.0003/input/input21
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_9_4_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c077
E: ID_PATH=pci-0000:00:14.0-usb-0:9.4.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9_4_2_1_0
E: ID_REVISION=7200
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ff0000 0 0 0 0
E:
MODALIAS=input:b0003v046DpC077e0111-e0,1,2,4,k110,111,112,113,114,115,116,117,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Optical Mouse"
E: PHYS="usb-0000:00:14.0-9.4.2/input0"
E: PRODUCT=3/46d/c077/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4257592

P:
/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.2/2-9.4.2:1.0/0003:046D:C077.0003/input/input21/event20
N: input/event20
S: input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:9.4.2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
/dev/input/by-path/pci-0000:00:14.0-usb-0:9.4.2:1.0-event-mouse
E: DEVNAME=/dev/input/event20
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.2/2-9.4.2:1.0/0003:046D:C077.0003/input/input21/event20
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c077
E: ID_PATH=pci-0000:00:14.0-usb-0:9.4.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9_4_2_1_0
E: ID_REVISION=7200
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c077/111:usb-0000:00:14.0-9.4
E: MAJOR=13
E: MINOR=84
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4338976

P:
/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.2/2-9.4.2:1.0/0003:046D:C077.0003/input/input21/mouse2
N: input/mouse2
S: input/by-id/usb-Logitech_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:9.4.2:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse /dev/input
/by-path/pci-0000:00:14.0-usb-0:9.4.2:1.0-mouse
E: DEVNAME=/dev/input/mouse2
E:
DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9.4/2-9.4.2/2-9.4.2:1.0/0003:046D:C077.0003/input/input21/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c077
E: ID_PATH=pci-0000:00:14.0-usb-0:9.4.2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_9_4_2_1_0
E: ID_REVISION=7200
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4258573

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Dock Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=2754383

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2864433

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=2768793

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2862984

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Dock Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=2769135

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input12/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input12/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2878390

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=2772498

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input13/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input13/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2865146

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0292e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card1/codec#0/beep0"
E: PRODUCT=1/10ec/292/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2753530

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=1/10ec/292/1:card1/codec#0/beep0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2866525

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E:
MODALIAS=input:b0011v0001p0001eAB54-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab54
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1417870

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab54:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2854745
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/platform/i8042/serio1/input/input2
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input2
E: EV=b
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: KEY=e520 10000 0 0 0 0
E:
MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=15
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2625040

P: /devices/platform/i8042/serio1/input/input2/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event1
E: EVDEV_ABS_00=::41
E: EVDEV_ABS_01=::37
E: EVDEV_ABS_35=::41
E: EVDEV_ABS_36=::37
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=67
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHPAD_INTEGRATION=internal
E: ID_INPUT_WIDTH_MM=97
E: LIBINPUT_DEVICE_GROUP=11/2/7/1b1:isa0060/serio1
E: LIBINPUT_MODEL_SYNAPTICS_SERIAL_TOUCHPAD=1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2866966

P: /devices/platform/i8042/serio1/input/input2/mouse0
N: input/mouse0
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse0
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2639096

P: /devices/platform/i8042/serio1/serio2/input/input3
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input3
E: EV=7
E: ID_BUS=i8042
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ae0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="TPPS/2 IBM TrackPoint"
E: PHYS="synaptics-pt/serio0/input0"
E: PRODUCT=11/2/a/0
E: PROP=21
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3207843

P: /devices/platform/i8042/serio1/serio2/input/input3/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input3/event14
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: LIBINPUT_DEVICE_GROUP=11/2/a/0:synaptics-pt/serio0
E: MAJOR=13
E: MINOR=78
E: POINTINGSTICK_CONST_ACCEL=1.0
E: POINTINGSTICK_SENSITIVITY=200
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3315017

P: /devices/platform/i8042/serio1/serio2/input/input3/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input3/mouse1
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3208428

P: /devices/platform/pcspkr/input/input8
E: DEVPATH=/devices/platform/pcspkr/input/input8
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2740635

P: /devices/platform/pcspkr/input/input8/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/pcspkr/input/input8/event6
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2863809

P: /devices/platform/thinkpad_acpi/input/input7
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input7
E: EV=33
E: ID_FOR_SEAT=input-platform-thinkpad_acpi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEY=10040 0 18040000 0 10000000000000 0 1501b02102004 c000280041114000
10e000000000000 0
E:
MODALIAS=input:b0019v17AAp5054e4101-e0,1,4,5,k71,72,73,78,8E,90,94,98,9E,AB,AD,BE,BF,C2,CD,D4,D9,E0,E1,E3,E4,EC,EE,F0,174,1D2,1DB,1DC,246,250,ram4,lsfw3,
E: MSC=10
E: NAME="ThinkPad Extra Buttons"
E: PHYS="thinkpad_acpi/input0"
E: PRODUCT=19/17aa/5054/4101
E: PROP=0
E: SUBSYSTEM=input
E: SW=8
E: TAGS=:seat:
E: USEC_INITIALIZED=2726304

P: /devices/platform/thinkpad_acpi/input/input7/event5
N: input/event5
S: input/by-path/platform-thinkpad_acpi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-thinkpad_acpi-event
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input7/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEYBOARD_KEY_01=screenlock
E: KEYBOARD_KEY_02=battery
E: KEYBOARD_KEY_03=sleep
E: KEYBOARD_KEY_04=wlan
E: KEYBOARD_KEY_06=switchvideomode
E: KEYBOARD_KEY_07=f21
E: KEYBOARD_KEY_08=f24
E: KEYBOARD_KEY_0b=suspend
E: KEYBOARD_KEY_0f=brightnessup
E: KEYBOARD_KEY_10=brightnessdown
E: KEYBOARD_KEY_11=kbdillumtoggle
E: KEYBOARD_KEY_13=zoom
E: KEYBOARD_KEY_14=volumeup
E: KEYBOARD_KEY_15=volumedown
E: KEYBOARD_KEY_16=mute
E: KEYBOARD_KEY_17=prog1
E: KEYBOARD_KEY_1a=f20
E: LIBINPUT_DEVICE_GROUP=19/17aa/5054/4101:thinkpad_acpi
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=2864797
E: XKBLAYOUT=de
E: XKBMODEL=pc105


DRM Information from dmesg:
---------------------------



-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.8.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages xserver-xorg-video-intel depends on:
ii  libc6                                  2.24-7
ii  libdrm-intel1                          2.4.74-1
ii  libdrm2                                2.4.74-1
ii  libpciaccess0                          0.13.4-1
ii  libpixman-1-0                          0.34.0-1
ii  libudev1                               232-6
ii  libx11-6                               2:1.6.3-1
ii  libx11-xcb1                            2:1.6.3-1
ii  libxcb-dri2-0                          1.12-1
ii  libxcb-dri3-0                          1.12-1
ii  libxcb-sync1                           1.12-1
ii  libxcb-util0                           0.3.8-3
ii  libxcb1                                1.12-1
ii  libxcursor1                            1:1.1.14-1+b1
ii  libxdamage1                            1:1.1.4-2+b1
ii  libxext6                               2:1.3.3-1
ii  libxfixes3                             1:5.0.2-1
ii  libxinerama1                           2:1.1.3-1+b1
ii  libxrandr2                             2:1.5.0-1
ii  libxrender1                            1:0.9.9-2
ii  libxshmfence1                          1.2-1
ii  libxss1                                1:1.2.2-1
ii  libxtst6                               2:1.2.2-1+b1
ii  libxv1                                 2:1.0.10-1+b1
ii  libxvmc1                               2:1.0.9-1
ii  xserver-xorg-core [xorg-video-abi-20]  2:1.18.4-2

xserver-xorg-video-intel recommends no packages.

xserver-xorg-video-intel suggests no packages.
[   807.066] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[   807.067] X Protocol Version 11, Revision 0
[   807.067] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   807.067] Current Operating System: Linux andreas-ThinkPad 4.8.0-1-amd64 #1 SMP Debian 4.8.7-1 (2016-11-13) x86_64
[   807.067] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=25f986e0-ac89-42c3-af8d-b11f367ff269 ro quiet
[   807.068] Build Date: 06 September 2016  01:32:44PM
[   807.068] xorg-server 2:1.18.4-2 (https://www.debian.org/support) 
[   807.068] Current version of pixman: 0.34.0
[   807.069] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   807.069] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   807.070] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Dec  6 16:50:53 2016
[   807.071] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   807.071] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   807.071] (==) No Layout section.  Using the first Screen section.
[   807.071] (==) No screen section available. Using defaults.
[   807.071] (**) |-->Screen "Default Screen Section" (0)
[   807.071] (**) |   |-->Monitor "<default monitor>"
[   807.071] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   807.071] (**) |   |-->Device "Intel"
[   807.071] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   807.071] (==) Automatically adding devices
[   807.071] (==) Automatically enabling devices
[   807.071] (==) Automatically adding GPU devices
[   807.071] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   807.071] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   807.071] 	Entry deleted from font path.
[   807.071] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[   807.071] (==) ModulePath set to "/usr/lib/xorg/modules"
[   807.071] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   807.071] (II) Loader magic: 0x558f4b03fdc0
[   807.071] (II) Module ABI versions:
[   807.071] 	X.Org ANSI C Emulation: 0.4
[   807.071] 	X.Org Video Driver: 20.0
[   807.071] 	X.Org XInput driver : 22.1
[   807.071] 	X.Org Server Extension : 9.0
[   807.072] (++) using VT number 1

[   807.074] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_36
[   807.074] (II) xfree86: Adding drm device (/dev/dri/card1)
[   807.527] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[   807.528] (II) xfree86: Adding drm device (/dev/dri/card0)
[   807.528] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[   807.529] (--) PCI:*(0:0:2:0) 8086:0416:17aa:221e rev 6, Mem @ 0xf1000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   807.529] (--) PCI: (0:1:0:0) 10de:1290:17aa:221e rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00004000/128
[   807.529] (II) LoadModule: "glx"
[   807.529] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   807.530] (II) Module glx: vendor="X.Org Foundation"
[   807.530] 	compiled for 1.18.4, module version = 1.0.0
[   807.530] 	ABI class: X.Org Server Extension, version 9.0
[   807.530] (==) AIGLX enabled
[   807.530] (II) LoadModule: "intel"
[   807.530] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   807.530] (II) Module intel: vendor="X.Org Foundation"
[   807.530] 	compiled for 1.18.4, module version = 2.99.917
[   807.530] 	Module class: X.Org Video Driver
[   807.530] 	ABI class: X.Org Video Driver, version 20.0
[   807.530] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   807.530] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[   807.530] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[   807.530] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[   807.539] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[   807.539] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161105-1 (Timo Aaltonen <tjaalton@debian.org>)
[   807.539] (II) intel(0): SNA compiled for use with valgrind
[   807.540] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[   807.540] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[   807.540] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   807.540] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   807.540] (==) intel(0): RGB weight 888
[   807.540] (==) intel(0): Default visual is TrueColor
[   807.540] (**) intel(0): Option "AccelMethod" "sna"
[   807.541] (II) intel(0): Output eDP1 has no monitor section
[   807.556] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[   807.556] (II) intel(0): Enabled output eDP1
[   807.556] (II) intel(0): Output VGA1 has no monitor section
[   807.556] (II) intel(0): Enabled output VGA1
[   807.556] (II) intel(0): Output DP1 has no monitor section
[   807.556] (II) intel(0): Enabled output DP1
[   807.556] (II) intel(0): Output HDMI1 has no monitor section
[   807.556] (II) intel(0): Enabled output HDMI1
[   807.556] (II) intel(0): Output DP2 has no monitor section
[   807.556] (II) intel(0): Enabled output DP2
[   807.556] (II) intel(0): Output HDMI2 has no monitor section
[   807.556] (II) intel(0): Enabled output HDMI2
[   807.556] (II) intel(0): Output DP2-1 has no monitor section
[   807.556] (EE) 
[   807.556] (EE) Backtrace:
[   807.556] (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4a) [0x558f4adb301a]
[   807.556] (EE) 1: /usr/lib/xorg/Xorg (0x558f4abf9000+0x1be389) [0x558f4adb7389]
[   807.556] (EE) 2: /lib/x86_64-linux-gnu/libc.so.6 (0x7ffa7d2ab000+0x33040) [0x7ffa7d2de040]
[   807.556] (EE) 3: /lib/x86_64-linux-gnu/libc.so.6 (readdir+0x29) [0x7ffa7d35e889]
[   807.556] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffa79026000+0x74618) [0x7ffa7909a618]
[   807.556] (EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffa79026000+0x75d47) [0x7ffa7909bd47]
[   807.556] (EE) 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffa79026000+0x7e603) [0x7ffa790a4603]
[   807.556] (EE) 7: /usr/lib/xorg/Xorg (InitOutput+0xa85) [0x558f4ac938f5]
[   807.556] (EE) 8: /usr/lib/xorg/Xorg (0x558f4abf9000+0x57e76) [0x558f4ac50e76]
[   807.556] (EE) 9: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf1) [0x7ffa7d2cb2b1]
[   807.556] (EE) 10: /usr/lib/xorg/Xorg (_start+0x2a) [0x558f4ac3afea]
[   807.556] (EE) 
[   807.556] (EE) Segmentation fault at address 0x4
[   807.557] (EE) 
Fatal server error:
[   807.557] (EE) Caught signal 11 (Segmentation fault). Server aborting
[   807.557] (EE) 
[   807.557] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   807.557] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[   807.557] (EE) 
[   807.575] (EE) Server terminated with error (1). Closing log file.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux andreas-ThinkPad 4.8.0-1-amd64 #1 SMP Debian 4.8.7-1 (2016-11-13) x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=25f986e0-ac89-42c3-af8d-b11f367ff269 ro quiet
Build Date: 06 September 2016  01:32:44PM
xorg-server 2:1.18.4-2 (https://www.debian.org/support) 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/gocht/.local/share/xorg/Xorg.1.log", Time: Tue Dec  6 17:05:48 2016
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[New Thread 0x7ffff17de700 (LWP 4073)]
[New Thread 0x7ffff0fdd700 (LWP 4074)]
[New Thread 0x7ffff07dc700 (LWP 4075)]

Thread 1 "Xorg" received signal SIGSEGV, Segmentation fault.
0x00007ffff5d3a889 in __readdir (dirp=dirp@entry=0x0) at ../sysdeps/posix/readdir.c:44
44	../sysdeps/posix/readdir.c: Datei oder Verzeichnis nicht gefunden.
#0  0x00007ffff5d3a889 in __readdir (dirp=dirp@entry=0x0) at ../sysdeps/posix/readdir.c:44
        dp = <optimized out>
        saved_errno = 2
#1  0x00007ffff1a76618 in has_connector_backlight (output=0x5555559e90d0, output=0x5555559e90d0) at ../../../src/sna/sna_display.c:1036
        sna_output = <optimized out>
        dir = 0x0
        str = 0x0
        path = "/sys/class/drm/card0-DP-3\000A-2/modes\000\000\000m\000ht", '\000' <repeats 14 times>, "\003\000\000\000\060", '\000' <repeats 19 times>, "[\000\000\000n", '\000' <repeats 19 times>, "w\000\000\000|\000\000\000\070\331\377\377\377\177\000\000\000\373\001\366\377\177\000\000 \000\000\000\000\000\000\000\000\020\350\367\377\177\000\000\b\000\000\000\000\000\000\000 \333\377\377\377\177\000\000\240\333\377\377\377\177\000\000\224\035\320\365\377\177\000\000\005\000\000\000\000\000\000\000\340\332\377\377\377\177\000\000\340\331\377\377\377\177\000\000"...
        de = <optimized out>
#2  sna_output_backlight_init (output=0x5555559e90d0) at ../../../src/sna/sna_display.c:1083
        sna_output = 0x5555559e8fa0
        from = X_CONFIG
        pci = <optimized out>
        best_iface = <optimized out>
#3  sna_output_add (sna=sna@entry=0x7ffff7e81000, id=<optimized out>, serial=serial@entry=0) at ../../../src/sna/sna_display.c:5144
        scrn = 0x5555559e2130
        config = 0x5555559e3830
        compat_conn = {conn = {encoders_ptr = 140737488344608, modes_ptr = 140737488344768, props_ptr = 93824997036144, prop_values_ptr = 93824997036176, count_modes = 0, count_props = 6, count_encoders = 3, encoder_id = 0, 
            connector_id = 61, connector_type = 10, connector_type_id = 3, connection = 2, mm_width = 0, mm_height = 0, subpixel = 0, pad = 0}, pad = {4294956576, 32767, 4294956736, 32767, 1436455024, 21845, 1436455056, 21845, 0, 6, 3, 0, 
            61, 10, 3, 2, 0, 0, 0, 0}}
        enc = {encoder_id = 0, encoder_type = 0, crtc_id = 0, possible_crtcs = 0, possible_clones = 0}
        dummy = {clock = 4294957104, hdisplay = 32767, hsync_start = 0, hsync_end = 55344, htotal = 65535, hskew = 32767, vdisplay = 0, vsync_start = 55344, vsync_end = 65535, vtotal = 32767, vscan = 0, vrefresh = 24, flags = 48, 
          type = 4294958416, name = "\377\177\000\000\220\334\377\377\377\177\000\000/\334\377\377\377\177", '\000' <repeats 13 times>}
        sna_output = 0x5555559e8fa0
        outputs = <optimized out>
        output = 0x5555559e90d0
        possible_encoders = <optimized out>
        attached_encoders = <optimized out>
        possible_crtcs = <optimized out>
        output_name = <optimized out>
        name = "DP2-1\000\000\000\070\200\311\365\377\177\000\000p\331\377\377\377\177\000\000@0\336\367\377\177\000"
        path = <optimized out>
        len = 5
        i = <optimized out>
#4  0x00007ffff1a77d47 in sna_mode_pre_init (scrn=scrn@entry=0x5555559e2130, sna=sna@entry=0x7ffff7e81000) at ../../../src/sna/sna_display.c:7467
        xf86_config = 0x5555559e3830
        res = 0x5555559e3750
        num_fake = 1
        i = 6
#5  0x00007ffff1a80603 in sna_pre_init (scrn=0x5555559e2130, probe=<optimized out>) at ../../../src/sna/sna_driver.c:658
        sna = <optimized out>
        buf = "x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2\000\177\000\000\370\307\361\367\377\177\000\000\005", '\000' <repeats 15 times>, "\210\340\377\377\377\177\000\000a>\336\367\377\177\000\000\020\000\000\000\000\000\000\000\370\307\361\367\377\177\000\000\005", '\000' <repeats 15 times>, "\001\000\000\000\000\000\000\000\000\340\372\367\377\177", '\000' <repeats 26 times>, "X\343\372\367\377\177\000\000\320\337\377\377\377\177\000\000\000\000\000\000\001\000\000\000\000\340\372\367\377\177\000\000"...
        defaultWeight = {red = 0, green = 0, blue = 0}
        pEnt = 0x5555559e2ef0
        zeros = {red = 0, green = 0, blue = 0}
        fd = 9
#6  0x00005555555ee8f5 in InitOutput (pScreenInfo=pScreenInfo@entry=0x5555559b66e0 <screenInfo>, argc=argc@entry=8, argv=argv@entry=0x7fffffffe518) at ../../../../hw/xfree86/common/xf86Init.c:583
        i = 0
        j = <optimized out>
        k = <optimized out>
        scr_index = <optimized out>
        modulelist = <optimized out>
        optionlist = 0x5555559c73e0
        screenpix24 = <optimized out>
        pix24 = <optimized out>
        pix24From = X_DEFAULT
        pix24Fail = 0
        autoconfig = <optimized out>
        sigio_blocked = 0
        want_hw_access = <optimized out>
        configured_device = <optimized out>
#7  0x00005555555abe76 in dix_main (argc=8, argv=0x7fffffffe518, envp=<optimized out>) at ../../dix/main.c:204
        i = <optimized out>
        alwaysCheckForInput = {0, 1}
#8  0x00007ffff5ca72b1 in __libc_start_main (main=0x555555595fb0 <main>, argc=8, argv=0x7fffffffe518, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffe508) at ../csu/libc-start.c:291
        result = <optimized out>
        unwind_buf = {cancel_jmp_buf = {{jmp_buf = {0, -2228025219544175856, 93824992501696, 140737488348432, 0, 0, -5458041941575521520, -5458020050593699056}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x7fffffffe560, 
              0x7ffff7ffe168}, data = {prev = 0x0, cleanup = 0x0, canceltype = -6816}}}
        not_first_call = <optimized out>
#9  0x0000555555595fea in _start ()
No symbol table info available.
(EE) 
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4a) [0x55555570e01a]
(EE) 1: /usr/lib/xorg/Xorg (0x555555554000+0x1be389) [0x555555712389]
(EE) 2: /lib/x86_64-linux-gnu/libc.so.6 (0x7ffff5c87000+0x33040) [0x7ffff5cba040]
(EE) 3: /lib/x86_64-linux-gnu/libc.so.6 (readdir+0x29) [0x7ffff5d3a889]
(EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffff1a02000+0x74618) [0x7ffff1a76618]
(EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffff1a02000+0x75d47) [0x7ffff1a77d47]
(EE) 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7ffff1a02000+0x7e603) [0x7ffff1a80603]
(EE) 7: /usr/lib/xorg/Xorg (InitOutput+0xa85) [0x5555555ee8f5]
(EE) 8: /usr/lib/xorg/Xorg (0x555555554000+0x57e76) [0x5555555abe76]
(EE) 9: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf1) [0x7ffff5ca72b1]
(EE) 10: /usr/lib/xorg/Xorg (_start+0x2a) [0x555555595fea]
(EE) 
(EE) Segmentation fault at address 0x4
(EE) 
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE) 
(EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
(EE) Please also check the log file at "/home/gocht/.local/share/xorg/Xorg.1.log" for additional information.
(EE) 
(EE) Server terminated with error (1). Closing log file.

Thread 1 "Xorg" received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:58
58	../sysdeps/unix/sysv/linux/raise.c: Datei oder Verzeichnis nicht gefunden.

Reply to: