Bug#846882: libdrm2: wrong scale for backlight with Xfce
Hi,
Le 5 décembre 2016, Andreas Boll a écrit :
> Which older versions? Do you mean xserver-xorg-video-intel?
> I guess it's related to the last upload of xserver-xorg-video-intel to
> jessie-backports.
I spoke about the previous version in Jessie-backports. I do not
remember the reference.
I am not sure that xserver-xorg-video-intel is the culprit because
lightdm works fine.
Joined the logs.
Regards.
--
Alain Rpnpif
[ 13.881]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 13.881] X Protocol Version 11, Revision 0
[ 13.881] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 13.881] Current Operating System: Linux Asus-901 4.7.0-0.bpo.1-686-pae #1 SMP Debian 4.7.8-1~bpo8+1 (2016-10-19) i686
[ 13.881] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-686-pae root=UUID=2ed3bc82-5cc0-4529-a13c-2e6f80b5b588 ro resume=/dev/sdb1 quiet
[ 13.881] Build Date: 11 February 2015 01:14:26AM
[ 13.881] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 13.881] Current version of pixman: 0.32.6
[ 13.881] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.881] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.882] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 5 18:19:17 2016
[ 13.891] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.891] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.897] (==) No Layout section. Using the first Screen section.
[ 13.897] (==) No screen section available. Using defaults.
[ 13.897] (**) |-->Screen "Default Screen Section" (0)
[ 13.897] (**) | |-->Monitor "<default monitor>"
[ 13.901] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.901] (==) Automatically adding devices
[ 13.901] (==) Automatically enabling devices
[ 13.901] (==) Automatically adding GPU devices
[ 13.919] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.919] Entry deleted from font path.
[ 13.939] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 13.939] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.939] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.939] (II) Loader magic: 0x8033a700
[ 13.939] (II) Module ABI versions:
[ 13.939] X.Org ANSI C Emulation: 0.4
[ 13.939] X.Org Video Driver: 18.0
[ 13.939] X.Org XInput driver : 21.0
[ 13.939] X.Org Server Extension : 8.0
[ 13.941] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.946] (--) PCI:*(0:0:2:0) 8086:27ae:1043:830f rev 3, Mem @ 0xf7f00000/524288, 0xd0000000/268435456, 0xf7ec0000/262144, I/O @ 0x0000dc80/8, BIOS @ 0x????????/131072
[ 13.946] (--) PCI: (0:0:2:1) 8086:27a6:1043:830f rev 3, Mem @ 0xf7f80000/524288
[ 13.952] (II) LoadModule: "glx"
[ 13.955] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.006] (II) Module glx: vendor="X.Org Foundation"
[ 14.006] compiled for 1.16.4, module version = 1.0.0
[ 14.006] ABI class: X.Org Server Extension, version 8.0
[ 14.006] (==) AIGLX enabled
[ 14.006] (==) Matched intel as autoconfigured driver 0
[ 14.006] (==) Matched intel as autoconfigured driver 1
[ 14.006] (==) Matched modesetting as autoconfigured driver 2
[ 14.006] (==) Matched fbdev as autoconfigured driver 3
[ 14.006] (==) Matched vesa as autoconfigured driver 4
[ 14.006] (==) Assigned the driver to the xf86ConfigLayout
[ 14.006] (II) LoadModule: "intel"
[ 14.006] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14.033] (II) Module intel: vendor="X.Org Foundation"
[ 14.033] compiled for 1.16.4, module version = 2.99.917
[ 14.033] Module class: X.Org Video Driver
[ 14.033] ABI class: X.Org Video Driver, version 18.0
[ 14.033] (II) LoadModule: "modesetting"
[ 14.033] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 14.036] (II) Module modesetting: vendor="X.Org Foundation"
[ 14.036] compiled for 1.16.4, module version = 0.9.0
[ 14.037] Module class: X.Org Video Driver
[ 14.037] ABI class: X.Org Video Driver, version 18.0
[ 14.037] (II) LoadModule: "fbdev"
[ 14.037] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 14.039] (II) Module fbdev: vendor="X.Org Foundation"
[ 14.039] compiled for 1.15.99.904, module version = 0.4.4
[ 14.039] Module class: X.Org Video Driver
[ 14.039] ABI class: X.Org Video Driver, version 18.0
[ 14.039] (II) LoadModule: "vesa"
[ 14.040] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.042] (II) Module vesa: vendor="X.Org Foundation"
[ 14.042] compiled for 1.15.99.904, module version = 2.3.3
[ 14.042] Module class: X.Org Video Driver
[ 14.042] ABI class: X.Org Video Driver, version 18.0
[ 14.042] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 14.043] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 14.043] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 14.043] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 14.043] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 14.044] (II) FBDEV: driver for framebuffer: fbdev
[ 14.044] (II) VESA: driver for VESA chipsets: vesa
[ 14.044] (++) using VT number 7
[ 14.063] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160425
[ 14.063] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161105-1~bpo8+1 (Vincent Cheng <vcheng@debian.org>)
[ 14.063] (II) intel(0): SNA compiled for use with valgrind
[ 14.068] (WW) Falling back to old probe method for modesetting
[ 14.068] (WW) Falling back to old probe method for fbdev
[ 14.068] (II) Loading sub module "fbdevhw"
[ 14.068] (II) LoadModule: "fbdevhw"
[ 14.069] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 14.071] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 14.071] compiled for 1.16.4, module version = 0.0.2
[ 14.071] ABI class: X.Org Video Driver, version 18.0
[ 14.071] (WW) Falling back to old probe method for vesa
[ 14.075] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 14.075] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 1 threads
[ 14.075] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.076] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 14.076] (==) intel(0): RGB weight 888
[ 14.076] (==) intel(0): Default visual is TrueColor
[ 14.077] (II) intel(0): Output LVDS1 has no monitor section
[ 14.079] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 14.079] (II) intel(0): Enabled output LVDS1
[ 14.079] (II) intel(0): Output VGA1 has no monitor section
[ 14.080] (II) intel(0): Enabled output VGA1
[ 14.080] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 14.080] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 14.081] (II) intel(0): Enabled output VIRTUAL1
[ 14.081] (--) intel(0): Output LVDS1 using initial mode 1024x600 on pipe 1
[ 14.081] (==) intel(0): TearFree disabled
[ 14.081] (==) intel(0): DPI set to (96, 96)
[ 14.081] (II) Loading sub module "dri3"
[ 14.082] (II) LoadModule: "dri3"
[ 14.082] (II) Module "dri3" already built-in
[ 14.082] (II) Loading sub module "dri2"
[ 14.082] (II) LoadModule: "dri2"
[ 14.082] (II) Module "dri2" already built-in
[ 14.082] (II) Loading sub module "present"
[ 14.082] (II) LoadModule: "present"
[ 14.082] (II) Module "present" already built-in
[ 14.082] (II) UnloadModule: "modesetting"
[ 14.082] (II) Unloading modesetting
[ 14.082] (II) UnloadModule: "fbdev"
[ 14.082] (II) Unloading fbdev
[ 14.082] (II) UnloadSubModule: "fbdevhw"
[ 14.083] (II) Unloading fbdevhw
[ 14.083] (II) UnloadModule: "vesa"
[ 14.083] (II) Unloading vesa
[ 14.083] (==) Depth 24 pixmap format is 32 bpp
[ 14.106] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 14.106] (==) intel(0): Backing store enabled
[ 14.106] (==) intel(0): Silken mouse enabled
[ 14.109] (II) intel(0): HW Cursor enabled
[ 14.109] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.114] (==) intel(0): DPMS enabled
[ 14.114] (==) intel(0): Display hotplug detection enabled
[ 14.119] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 14.119] (II) intel(0): [DRI2] Setup complete
[ 14.119] (II) intel(0): [DRI2] DRI driver: i915
[ 14.119] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 14.119] (II) intel(0): direct rendering: DRI2 enabled
[ 14.119] (II) intel(0): hardware support for Present enabled
[ 14.119] (--) RandR disabled
[ 14.158] (II) SELinux: Disabled on system
[ 14.351] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.351] (II) AIGLX: enabled GLX_ARB_create_context
[ 14.351] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 14.351] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 14.351] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.351] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.351] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 14.351] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 14.351] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.352] (II) AIGLX: Loaded and initialized i915
[ 14.352] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.360] (II) intel(0): switch to mode 1024x600@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 14.360] (II) intel(0): Setting screen physical size to 270 x 158
[ 14.859] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 14.859] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.859] (II) LoadModule: "evdev"
[ 15.024] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.035] (II) Module evdev: vendor="X.Org Foundation"
[ 15.035] compiled for 1.16.0, module version = 2.9.0
[ 15.035] Module class: X.Org XInput Driver
[ 15.035] ABI class: X.Org XInput driver, version 21.0
[ 15.035] (II) Using input driver 'evdev' for 'Power Button'
[ 15.036] (**) Power Button: always reports core events
[ 15.036] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 15.036] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.036] (--) evdev: Power Button: Found keys
[ 15.036] (II) evdev: Power Button: Configuring as keyboard
[ 15.036] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 15.037] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.037] (**) Option "xkb_rules" "evdev"
[ 15.037] (**) Option "xkb_model" "pc105"
[ 15.037] (**) Option "xkb_layout" "fr"
[ 15.037] (**) Option "xkb_variant" "oss"
[ 15.246] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 15.247] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15.247] (II) Using input driver 'evdev' for 'Video Bus'
[ 15.247] (**) Video Bus: always reports core events
[ 15.247] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 15.247] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15.247] (--) evdev: Video Bus: Found keys
[ 15.247] (II) evdev: Video Bus: Configuring as keyboard
[ 15.247] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[ 15.247] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 15.247] (**) Option "xkb_rules" "evdev"
[ 15.248] (**) Option "xkb_model" "pc105"
[ 15.248] (**) Option "xkb_layout" "fr"
[ 15.248] (**) Option "xkb_variant" "oss"
[ 15.255] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 15.255] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.255] (II) Using input driver 'evdev' for 'Power Button'
[ 15.255] (**) Power Button: always reports core events
[ 15.256] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 15.256] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.256] (--) evdev: Power Button: Found keys
[ 15.256] (II) evdev: Power Button: Configuring as keyboard
[ 15.256] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[ 15.256] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 15.256] (**) Option "xkb_rules" "evdev"
[ 15.256] (**) Option "xkb_model" "pc105"
[ 15.256] (**) Option "xkb_layout" "fr"
[ 15.257] (**) Option "xkb_variant" "oss"
[ 15.260] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 15.260] (II) No input driver specified, ignoring this device.
[ 15.260] (II) This device may have been added with another device file.
[ 15.262] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 15.262] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 15.262] (II) Using input driver 'evdev' for 'Sleep Button'
[ 15.262] (**) Sleep Button: always reports core events
[ 15.262] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 15.262] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 15.262] (--) evdev: Sleep Button: Found keys
[ 15.262] (II) evdev: Sleep Button: Configuring as keyboard
[ 15.262] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 15.262] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 15.263] (**) Option "xkb_rules" "evdev"
[ 15.263] (**) Option "xkb_model" "pc105"
[ 15.263] (**) Option "xkb_layout" "fr"
[ 15.263] (**) Option "xkb_variant" "oss"
[ 15.266] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 15.266] (II) No input driver specified, ignoring this device.
[ 15.266] (II) This device may have been added with another device file.
[ 15.268] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 15.268] (II) No input driver specified, ignoring this device.
[ 15.268] (II) This device may have been added with another device file.
[ 15.269] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 15.269] (II) No input driver specified, ignoring this device.
[ 15.269] (II) This device may have been added with another device file.
[ 15.271] (II) config/udev: Adding input device CNF7129 (/dev/input/event11)
[ 15.272] (**) CNF7129: Applying InputClass "evdev keyboard catchall"
[ 15.272] (II) Using input driver 'evdev' for 'CNF7129'
[ 15.272] (**) CNF7129: always reports core events
[ 15.272] (**) evdev: CNF7129: Device: "/dev/input/event11"
[ 15.272] (--) evdev: CNF7129: Vendor 0x4f2 Product 0xb071
[ 15.272] (--) evdev: CNF7129: Found keys
[ 15.272] (II) evdev: CNF7129: Configuring as keyboard
[ 15.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-8/5-8:1.0/input/input12/event11"
[ 15.272] (II) XINPUT: Adding extended input device "CNF7129" (type: KEYBOARD, id 10)
[ 15.272] (**) Option "xkb_rules" "evdev"
[ 15.272] (**) Option "xkb_model" "pc105"
[ 15.272] (**) Option "xkb_layout" "fr"
[ 15.272] (**) Option "xkb_variant" "oss"
[ 15.275] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event12)
[ 15.275] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
[ 15.275] (II) Using input driver 'evdev' for 'Asus EeePC extra buttons'
[ 15.275] (**) Asus EeePC extra buttons: always reports core events
[ 15.275] (**) evdev: Asus EeePC extra buttons: Device: "/dev/input/event12"
[ 15.275] (--) evdev: Asus EeePC extra buttons: Vendor 0 Product 0
[ 15.275] (--) evdev: Asus EeePC extra buttons: Found keys
[ 15.275] (II) evdev: Asus EeePC extra buttons: Configuring as keyboard
[ 15.276] (**) Option "config_info" "udev:/sys/devices/platform/eeepc/input/input13/event12"
[ 15.276] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD, id 11)
[ 15.276] (**) Option "xkb_rules" "evdev"
[ 15.276] (**) Option "xkb_model" "pc105"
[ 15.276] (**) Option "xkb_layout" "fr"
[ 15.276] (**) Option "xkb_variant" "oss"
[ 15.279] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 15.279] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.279] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 15.279] (**) AT Translated Set 2 keyboard: always reports core events
[ 15.279] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 15.279] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 15.279] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 15.279] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 15.279] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 15.279] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 15.279] (**) Option "xkb_rules" "evdev"
[ 15.279] (**) Option "xkb_model" "pc105"
[ 15.279] (**) Option "xkb_layout" "fr"
[ 15.279] (**) Option "xkb_variant" "oss"
[ 15.282] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event1)
[ 15.282] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 15.282] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 15.282] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 15.282] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 15.282] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Touchpad"
[ 15.282] (II) LoadModule: "synaptics"
[ 15.283] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 15.306] (II) Module synaptics: vendor="X.Org Foundation"
[ 15.306] compiled for 1.16.0.901, module version = 1.8.99
[ 15.306] Module class: X.Org XInput Driver
[ 15.306] ABI class: X.Org XInput driver, version 21.0
[ 15.307] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 15.307] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 15.307] (**) Option "Device" "/dev/input/event1"
[ 15.332] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 15.332] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1152 (res 31)
[ 15.332] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 768 (res 31)
[ 15.332] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
[ 15.332] (II) synaptics: ETPS/2 Elantech Touchpad: device does not report finger width.
[ 15.332] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 15.332] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 15.332] (--) synaptics: ETPS/2 Elantech Touchpad: invalid pressure range. defaulting to 0 - 255
[ 15.333] (--) synaptics: ETPS/2 Elantech Touchpad: invalid finger width range. defaulting to 0 - 15
[ 15.333] (**) Option "TapButton1" "1"
[ 15.333] (**) Option "TapButton2" "3"
[ 15.333] (**) Option "TapButton3" "2"
[ 15.333] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 15.333] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 15.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 15.360] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 15.360] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 15.360] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 15.360] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.145
[ 15.360] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 15.361] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 15.361] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 15.361] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 15.361] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 15.363] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 15.363] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 15.365] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 15.365] (II) No input driver specified, ignoring this device.
[ 15.365] (II) This device may have been added with another device file.
[ 16.082] (II) intel(0): EDID vendor "AUO", prod id 4128
[ 16.082] (II) intel(0): Printing DDC gathered Modelines:
[ 16.082] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 600 619 625 -hsync -vsync (37.5 kHz eP)
[ 0.000000] Linux version 4.7.0-0.bpo.1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.7.8-1~bpo8+1 (2016-10-19)
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f79ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f7a0000-0x000000003f7adfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f7ae000-0x000000003f7effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f7f0000-0x000000003f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer INC. 901/901, BIOS 2103 06/11/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f7a0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x15dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x159c7000, 0x159c7fff] PGTABLE
[ 0.000000] BRK [0x159c8000, 0x159c9fff] PGTABLE
[ 0.000000] BRK [0x159ca000, 0x159cafff] PGTABLE
[ 0.000000] BRK [0x159cb000, 0x159cbfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35f3c000-0x36f95fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBD00 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000003F7A0000 00003C (v01 A_M_I_ OEMRSDT 06000911 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000003F7A0200 000084 (v02 A_M_I_ OEMFACP 06000911 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000003F7A0430 0062A6 (v01 P0017 P0017000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 0x000000003F7AE000 000040
[ 0.000000] ACPI: APIC 0x000000003F7A0390 00005C (v01 A_M_I_ OEMAPIC 06000911 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000003F7A03F0 00003C (v01 A_M_I_ OEMMCFG 06000911 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000003F7AE040 000061 (v01 A_M_I_ AMI_OEM 06000911 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000003F7A66E0 000038 (v01 A_M_I_ OEMHPET 06000911 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000003F7AEB80 0004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000003f79ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003f79ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003f79ffff]
[ 0.000000] On node 0 totalpages: 259902
[ 0.000000] free_area_init_node: node 0, pgdat d57bbd80, node_mem_map f7110024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32162 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f70e2000 s49292 r0 d32628 u81920
[ 0.000000] pcpu-alloc: s49292 r0 d32628 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257899
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-686-pae root=UUID=2ed3bc82-5cc0-4529-a13c-2e6f80b5b588 ro resume=/dev/sdb1 quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x218, date = 2009-04-10
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003f7a0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1002640K/1039608K available (5634K kernel code, 688K rwdata, 1680K rodata, 736K init, 528K bss, 36968K reserved, 0K cma-reserved, 128648K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xd57d5000 - 0xd588d000 ( 736 kB)
.data : 0xd5580e14 - 0xd57d3280 (2377 kB)
.text : 0xd5000000 - 0xd5580e14 (5635 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f582c000 soft=f582e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1600.060 MHz processor
[ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.12 BogoMIPS (lpj=6400240)
[ 0.004027] pid_max: default: 32768 minimum: 301
[ 0.004070] ACPI: Core revision 20160422
[ 0.023490] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.023580] Security Framework initialized
[ 0.023586] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.023612] AppArmor: AppArmor disabled by boot time parameter
[ 0.023649] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.023656] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024304] Disabled fast string operations
[ 0.024314] CPU: Physical Processor ID: 0
[ 0.024318] CPU: Processor Core ID: 0
[ 0.024327] mce: CPU supports 5 MCE banks
[ 0.024342] CPU0: Thermal monitoring enabled (TM2)
[ 0.024352] process: using mwait in idle threads
[ 0.024368] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.024374] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.024719] Freeing SMP alternatives memory: 24K (d588d000 - d5893000)
[ 0.028024] ftrace: allocating 23692 entries in 47 pages
[ 0.044196] smpboot: Max logical packages: 2
[ 0.044207] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.044218] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044743] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088000] smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (family: 0x6, model: 0x1c, stepping: 0x2)
[ 0.088000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[ 0.088000] ... version: 3
[ 0.088000] ... bit width: 40
[ 0.088000] ... generic registers: 2
[ 0.088000] ... value mask: 000000ffffffffff
[ 0.088000] ... max period: 000000007fffffff
[ 0.088000] ... fixed-purpose events: 3
[ 0.088000] ... event mask: 0000000700000003
[ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088000] CPU 1 irqstacks, hard=f5980000 soft=f5982000
[ 0.088000] x86: Booting SMP configuration:
[ 0.088000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.166068] x86: Booted up 1 node, 2 CPUs
[ 0.166068] smpboot: Total of 2 processors activated (6400.01 BogoMIPS)
[ 0.176103] devtmpfs: initialized
[ 0.184089] PM: Registering ACPI NVS region [mem 0x3f7ae000-0x3f7effff] (270336 bytes)
[ 0.184330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.192031] pinctrl core: initialized pinctrl subsystem
[ 0.204300] NET: Registered protocol family 16
[ 0.212017] cpuidle: using governor ladder
[ 0.220016] cpuidle: using governor menu
[ 0.220140] ACPI: bus type PCI registered
[ 0.220148] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.220341] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.220350] PCI: not using MMCONFIG
[ 0.220354] PCI: Using configuration type 1 for base access
[ 0.236124] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.272218] ACPI: Added _OSI(Module Device)
[ 0.272225] ACPI: Added _OSI(Processor Device)
[ 0.272230] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.272235] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.272636] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.284802] ACPI: Dynamic OEM Table Load:
[ 0.284820] ACPI: SSDT 0x00000000F59B2400 00023C (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
[ 0.285896] ACPI: Dynamic OEM Table Load:
[ 0.285915] ACPI: SSDT 0x00000000F59BF800 000724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
[ 0.289227] ACPI: Dynamic OEM Table Load:
[ 0.289241] ACPI: SSDT 0x00000000F599D500 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
[ 0.290102] ACPI: Dynamic OEM Table Load:
[ 0.290114] ACPI: SSDT 0x00000000F5985CC0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
[ 0.291345] ACPI : EC: EC started
[ 0.291643] ACPI: Interpreter enabled
[ 0.291706] ACPI: (supports S0 S3 S4 S5)
[ 0.291712] ACPI: Using IOAPIC for interrupt routing
[ 0.291819] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.293179] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.293185] PCI: Using MMCONFIG for extended config space
[ 0.293199] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.309504] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.309522] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.309539] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.309551] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.310282] PCI host bridge to bus 0000:00
[ 0.310292] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.310300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.310307] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.310313] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.310320] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xffffffff window]
[ 0.310327] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.310351] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[ 0.310670] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[ 0.310690] pci 0000:00:02.0: reg 0x10: [mem 0xf7f00000-0xf7f7ffff]
[ 0.310702] pci 0000:00:02.0: reg 0x14: [io 0xdc80-0xdc87]
[ 0.310714] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.310725] pci 0000:00:02.0: reg 0x1c: [mem 0xf7ec0000-0xf7efffff]
[ 0.311038] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.311056] pci 0000:00:02.1: reg 0x10: [mem 0xf7f80000-0xf7ffffff]
[ 0.311415] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.311452] pci 0000:00:1b.0: reg 0x10: [mem 0xf7eb8000-0xf7ebbfff 64bit]
[ 0.311599] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.311894] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.312048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.312211] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.312384] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.312533] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.312849] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.312986] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.313143] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.313313] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.313461] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.313620] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.313791] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.313864] pci 0000:00:1d.0: reg 0x20: [io 0xd480-0xd49f]
[ 0.314187] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.314260] pci 0000:00:1d.1: reg 0x20: [io 0xd800-0xd81f]
[ 0.314568] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.314642] pci 0000:00:1d.2: reg 0x20: [io 0xd880-0xd89f]
[ 0.314947] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.315020] pci 0000:00:1d.3: reg 0x20: [io 0xdc00-0xdc1f]
[ 0.315337] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.315369] pci 0000:00:1d.7: reg 0x10: [mem 0xf7eb7c00-0xf7eb7fff]
[ 0.315501] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.315802] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.316041] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.316211] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.316346] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.316358] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.316366] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.316375] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.316382] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
[ 0.316702] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[ 0.316732] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.316749] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.316767] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.316784] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.316802] pci 0000:00:1f.2: reg 0x20: [io 0xffa0-0xffaf]
[ 0.316835] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.316841] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.316847] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.316853] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.316903] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.317199] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.317281] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.317706] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.317886] pci 0000:04:00.0: [1969:1026] type 00 class 0x020000
[ 0.317934] pci 0000:04:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit]
[ 0.317961] pci 0000:04:00.0: reg 0x18: [io 0xec80-0xecff]
[ 0.318143] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.318347] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.318368] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.318378] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.318387] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.318529] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.318706] pci 0000:01:00.0: [1814:0781] type 00 class 0x028000
[ 0.318738] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 0.318904] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.328049] pci 0000:00:1c.3: PCI bridge to [bus 01-02]
[ 0.328064] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xfbefffff]
[ 0.328078] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.328255] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.328277] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.328284] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.328291] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.328297] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.328304] pci 0000:00:1e.0: bridge window [mem 0x3f800000-0xffffffff window] (subtractive decode)
[ 0.328353] pci_bus 0000:00: on NUMA node 0
[ 0.330399] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.330592] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.330779] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.330966] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.331152] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.331339] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.331526] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.331713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.332073] ACPI : EC: EC stopped
[ 0.332203] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.332209] ACPI : EC: EC started
[ 0.332788] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.332788] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.332788] vgaarb: loaded
[ 0.332788] vgaarb: bridge control possible 0000:00:02.0
[ 0.332788] PCI: Using ACPI for IRQ routing
[ 0.338006] PCI: pci_cache_line_size set to 64 bytes
[ 0.338105] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.338113] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.338120] e820: reserve RAM buffer [mem 0x3f7a0000-0x3fffffff]
[ 0.338799] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.338812] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.338825] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.340058] amd_nb: Cannot enumerate AMD northbridges
[ 0.340070] clocksource: Switched to clocksource hpet
[ 0.384119] VFS: Disk quotas dquot_6.6.0
[ 0.396052] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.408283] pnp: PnP ACPI init
[ 0.408546] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.408560] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.408711] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.408915] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.409092] pnp 00:03: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.409609] system 00:04: [io 0x025c-0x025f] has been reserved
[ 0.409618] system 00:04: [io 0x0380-0x0383] has been reserved
[ 0.409626] system 00:04: [io 0x0400-0x041f] has been reserved
[ 0.409633] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.409641] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.409648] system 00:04: [io 0x0480-0x04bf] has been reserved
[ 0.409656] system 00:04: [mem 0x8c000000-0x8c01ffff] has been reserved
[ 0.409667] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.409674] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.409682] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.409689] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.409697] system 00:04: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.409709] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.410058] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.410068] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.410079] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.410301] system 00:06: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.410312] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.410945] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.410955] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.410963] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.410970] system 00:07: [mem 0x00100000-0x3f7fffff] could not be reserved
[ 0.410980] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.411387] pnp: PnP ACPI: found 8 devices
[ 0.411396] PnPBIOS: Disabled
[ 0.455084] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.455134] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.455146] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.455154] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[ 0.455175] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.455194] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.455202] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.455210] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.455229] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 01-02] add_size 1000
[ 0.455265] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.455273] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.455280] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.455288] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.455295] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.455303] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.455310] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.455318] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.455325] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.455333] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.455340] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.455347] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.455354] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.455361] pci 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.455368] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.455375] pci 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.455393] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.455412] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.455429] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.455438] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.455455] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.455466] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.455476] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.455486] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.455497] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 0.455506] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.455518] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.455527] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.455541] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.455548] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.455559] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.455569] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.455581] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.455588] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.455599] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
[ 0.455609] pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.455625] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf800ffff]
[ 0.455637] pci 0000:00:1c.3: PCI bridge to [bus 01-02]
[ 0.455645] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.455656] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xfbefffff]
[ 0.455665] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.455679] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.455702] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.455708] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.455715] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.455721] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.455727] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xffffffff window]
[ 0.455734] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.455740] pci_bus 0000:05: resource 1 [mem 0x40000000-0x401fffff]
[ 0.455746] pci_bus 0000:05: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.455753] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.455759] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.455765] pci_bus 0000:04: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.455772] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.455778] pci_bus 0000:03: resource 1 [mem 0x40600000-0x407fffff]
[ 0.455784] pci_bus 0000:03: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.455790] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.455796] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff]
[ 0.455803] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.455809] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.455816] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.455822] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.455828] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.455834] pci_bus 0000:06: resource 8 [mem 0x3f800000-0xffffffff window]
[ 0.512041] NET: Registered protocol family 2
[ 0.536122] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.536172] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.536232] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.536336] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.536354] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.548154] NET: Registered protocol family 1
[ 0.548202] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.549696] pci 0000:04:00.0: [Firmware Bug]: VPD access disabled
[ 0.549712] PCI: CLS 32 bytes, default 64
[ 0.549876] Unpacking initramfs...
[ 1.366426] Freeing initrd memory: 16744K (f5f3c000 - f6f96000)
[ 1.376618] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.388046] audit: initializing netlink subsys (disabled)
[ 1.388098] audit: type=2000 audit(1480958344.388:1): initialized
[ 1.389081] Initialise system trusted keyrings
[ 1.389381] workingset: timestamp_bits=12 max_order=18 bucket_order=6
[ 1.389417] zbud: loaded
[ 1.909375] Key type asymmetric registered
[ 1.909386] Asymmetric key parser 'x509' registered
[ 1.909433] bounce: pool size: 64 pages
[ 1.920080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.920185] io scheduler noop registered
[ 1.920192] io scheduler deadline registered
[ 1.932040] io scheduler cfq registered (default)
[ 1.932278] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.933048] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[ 1.933388] pcieport 0000:00:1c.3: enabling device (0106 -> 0107)
[ 1.933793] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.933822] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.933889] intel_idle: MWAIT substates: 0x20220
[ 1.933894] intel_idle: v0.4.1 model 0x1C
[ 1.933918] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.934194] intel_idle: lapic_timer_reliable_states 0x2
[ 1.934594] GHES: HEST is not enabled!
[ 1.934757] isapnp: Scanning for PnP cards...
[ 2.288588] isapnp: No Plug & Play device found
[ 2.288849] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.290510] Linux agpgart interface v0.103
[ 2.291712] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.317146] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.317170] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.317801] mousedev: PS/2 mouse device common for all mice
[ 2.319474] rtc_cmos 00:01: RTC can wake from S4
[ 2.319799] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.319850] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.319893] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.347494] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.364120] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17105d99878, max_idle_ns: 440795233616 ns
[ 2.396210] NET: Registered protocol family 10
[ 2.408293] mip6: Mobile IPv6
[ 2.408316] NET: Registered protocol family 17
[ 2.408339] mpls_gso: MPLS GSO support
[ 2.409122] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x218
[ 2.409158] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x218
[ 2.409343] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.409360] Using IPI No-Shortcut mode
[ 2.409929] registered taskstats version 1
[ 2.409938] Loading compiled-in X.509 certificates
[ 2.415045] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 2.417986] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 2.418042] zswap: loaded using pool lzo/zbud
[ 2.418877] rtc_cmos 00:01: setting system clock to 2016-12-05 17:19:06 UTC (1480958346)
[ 2.419049] PM: Checking hibernation image partition /dev/sdb1
[ 2.419061] PM: Hibernation image not present or could not be loaded.
[ 2.419770] Freeing unused kernel memory: 736K (d57d5000 - d588d000)
[ 2.419971] Write protecting the kernel text: 5636k
[ 2.420159] Write protecting the kernel read-only data: 1688k
[ 2.420165] NX-protecting the kernel data: 4604k
[ 2.420579] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.562333] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.562805] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.562920] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.566139] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.566407] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.567337] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.567642] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.567949] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.568382] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.568675] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 2.737863] thermal: module verification failed: signature and/or required key missing - tainting kernel
[ 2.761405] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.761417] ACPI: Thermal Zone [TZ00] (39 C)
[ 2.810946] ACPI: bus type USB registered
[ 2.811121] usbcore: registered new interface driver usbfs
[ 2.811200] usbcore: registered new interface driver hub
[ 2.819492] usbcore: registered new device driver usb
[ 2.821552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.822973] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.823381] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.823425] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.823456] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.823536] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[ 2.825249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.825262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.825271] usb usb1: Product: UHCI Host Controller
[ 2.825279] usb usb1: Manufacturer: Linux 4.7.0-0.bpo.1-686-pae uhci_hcd
[ 2.825287] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.826129] hub 1-0:1.0: USB hub found
[ 2.826174] hub 1-0:1.0: 2 ports detected
[ 2.827149] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.827185] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.827211] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.827298] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000d800
[ 2.827607] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.827619] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.827627] usb usb2: Product: UHCI Host Controller
[ 2.827635] usb usb2: Manufacturer: Linux 4.7.0-0.bpo.1-686-pae uhci_hcd
[ 2.827642] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.828563] hub 2-0:1.0: USB hub found
[ 2.828624] hub 2-0:1.0: 2 ports detected
[ 2.832625] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.832663] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.832688] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.832766] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000d880
[ 2.840434] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.840449] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.840457] usb usb3: Product: UHCI Host Controller
[ 2.840465] usb usb3: Manufacturer: Linux 4.7.0-0.bpo.1-686-pae uhci_hcd
[ 2.840472] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.841716] hub 3-0:1.0: USB hub found
[ 2.841766] hub 3-0:1.0: 2 ports detected
[ 2.842745] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.842784] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.842817] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.842903] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000dc00
[ 2.843199] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.843210] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.843219] usb usb4: Product: UHCI Host Controller
[ 2.843227] usb usb4: Manufacturer: Linux 4.7.0-0.bpo.1-686-pae uhci_hcd
[ 2.843235] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.844150] hub 4-0:1.0: USB hub found
[ 2.844195] hub 4-0:1.0: 2 ports detected
[ 2.853781] ehci-pci: EHCI PCI platform driver
[ 2.856509] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.856556] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.856600] ehci-pci 0000:00:1d.7: debug port 1
[ 2.860575] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 2.864492] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 2.876415] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.876682] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.876693] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.876702] usb usb5: Product: EHCI Host Controller
[ 2.876711] usb usb5: Manufacturer: Linux 4.7.0-0.bpo.1-686-pae ehci_hcd
[ 2.876719] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.877081] SCSI subsystem initialized
[ 2.877578] hub 5-0:1.0: USB hub found
[ 2.877687] hub 5-0:1.0: 8 ports detected
[ 2.896874] libata version 3.00 loaded.
[ 2.901064] hub 1-0:1.0: USB hub found
[ 2.901117] hub 1-0:1.0: 2 ports detected
[ 2.924509] hub 2-0:1.0: USB hub found
[ 2.924557] hub 2-0:1.0: 2 ports detected
[ 2.949329] hub 3-0:1.0: USB hub found
[ 2.949390] hub 3-0:1.0: 2 ports detected
[ 2.972393] hub 4-0:1.0: USB hub found
[ 2.972458] hub 4-0:1.0: 2 ports detected
[ 2.973005] ata_piix 0000:00:1f.2: version 2.13
[ 2.973286] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.991888] scsi host0: ata_piix
[ 3.009973] scsi host1: ata_piix
[ 3.010360] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.010370] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.185460] ata2.00: CFA: ASUS-PHISON SSD, TST2.04U, max UDMA/66
[ 3.185472] ata2.00: 7880544 sectors, multi 0: LBA
[ 3.185495] ata2.01: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66
[ 3.185503] ata2.01: 31522176 sectors, multi 0: LBA
[ 3.188273] ata2.00: configured for UDMA/66
[ 3.191001] ata2.01: configured for UDMA/66
[ 3.203791] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD .04U PQ: 0 ANSI: 5
[ 3.236437] scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD .04P PQ: 0 ANSI: 5
[ 3.295979] sd 1:0:0:0: [sda] 7880544 512-byte logical blocks: (4.03 GB/3.76 GiB)
[ 3.297145] sd 1:0:0:0: [sda] Write Protect is off
[ 3.297161] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.297310] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.300679] sda: sda1 sda2 sda3
[ 3.300726] sd 1:0:1:0: [sdb] 31522176 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 3.301242] sd 1:0:1:0: [sdb] Write Protect is off
[ 3.301257] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.301414] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.303355] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.307662] sdb: sdb1
[ 3.309136] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 3.412073] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 3.448128] usb 5-8: new high-speed USB device number 3 using ehci-pci
[ 3.625120] usb 5-8: New USB device found, idVendor=04f2, idProduct=b071
[ 3.625138] usb 5-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 3.625150] usb 5-8: Product: CNF7129
[ 3.625172] usb 5-8: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.625179] usb 5-8: SerialNumber: SN0001
[ 4.067682] PM: Starting manual resume from disk
[ 4.067696] PM: Hibernation image partition 8:17 present
[ 4.067700] PM: Looking for hibernation image.
[ 4.068437] PM: Image not found (code -22)
[ 4.068446] PM: Hibernation image not present or could not be loaded.
[ 4.101680] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x020030)
[ 4.175389] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x02, 0x64.
[ 4.245400] psmouse serio1: elantech: Elan sample query result 00, 03, 64
[ 4.451375] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
[ 4.457705] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4.457720] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.457731] PM: Basic memory bitmaps created
[ 4.458871] PM: Basic memory bitmaps freed
[ 4.676512] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.185331] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 5.228527] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.229112] systemd[1]: Detected architecture x86.
[ 5.234939] systemd[1]: Set hostname to <Asus-901>.
[ 5.678815] systemd[1]: Created slice User and Session Slice.
[ 5.679414] systemd[1]: Created slice System Slice.
[ 5.679668] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.679864] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.680073] systemd[1]: Listening on udev Kernel Socket.
[ 5.680162] systemd[1]: Reached target Slices.
[ 5.680672] systemd[1]: Created slice system-getty.slice.
[ 5.680849] systemd[1]: Listening on Syslog Socket.
[ 5.681421] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.681933] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.682120] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.682335] systemd[1]: Listening on Journal Socket.
[ 5.704978] systemd[1]: Starting Load Kernel Modules...
[ 5.708639] systemd[1]: Mounting Huge Pages File System...
[ 5.711439] systemd[1]: Starting LSB: Set keymap...
[ 5.711774] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.720602] systemd[1]: Listening on Journal Audit Socket.
[ 5.724346] systemd[1]: Starting Journal Service...
[ 5.729013] systemd[1]: Mounting Debug File System...
[ 5.729135] systemd[1]: Reached target Encrypted Volumes.
[ 5.729606] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.729742] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.729829] systemd[1]: Reached target Remote File Systems.
[ 5.733308] systemd[1]: Starting LSB: Prepare console...
[ 5.733754] systemd[1]: Listening on udev Control Socket.
[ 5.737826] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.741630] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.758193] systemd[1]: Started LSB: Set keymap.
[ 5.786082] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.796804] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.811205] systemd[1]: Mounted Huge Pages File System.
[ 5.811388] systemd[1]: Mounted Debug File System.
[ 5.811508] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.824869] lp: driver loaded but no devices found
[ 5.838450] ppdev: user-space parallel port driver
[ 5.857229] fuse init (API version 7.25)
[ 5.945293] loop: module loaded
[ 5.960417] systemd[1]: Started Load Kernel Modules.
[ 5.961600] systemd[1]: Started Create Static Device Nodes in /dev.
[ 5.976782] systemd[1]: Starting udev Kernel Device Manager...
[ 5.981574] systemd[1]: Starting Apply Kernel Variables...
[ 5.987355] systemd[1]: Mounting FUSE Control File System...
[ 6.016640] systemd[1]: Started Apply Kernel Variables.
[ 6.025952] systemd[1]: Mounted FUSE Control File System.
[ 6.136263] systemd[1]: Started LSB: Prepare console.
[ 6.144661] systemd[1]: Starting LSB: Set console font and keymap...
[ 6.147979] systemd[1]: Started Journal Service.
[ 6.799438] random: nonblocking pool is initialized
[ 6.851091] EXT4-fs (sda1): warning: checktime reached, running e2fsck is recommended
[ 6.853715] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.913242] systemd-journald[514]: Received request to flush runtime journal from PID 1
[ 7.545173] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.550525] ACPI: Lid Switch [LID]
[ 7.550918] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 7.550936] ACPI: Sleep Button [SLPB]
[ 7.551250] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 7.551264] ACPI: Power Button [PWRB]
[ 7.551564] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 7.551576] ACPI: Power Button [PWRF]
[ 7.573557] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.577606] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 7.578211] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.627766] eeepc_laptop: Eee PC Hotkey Driver
[ 7.627796] eeepc_laptop: Hotkey init flags 0x41
[ 7.636586] [drm] Initialized drm 1.1.0 20060810
[ 7.746171] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.746188] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.746199] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 7.746208] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.746216] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.746226] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 7.746236] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 7.784119] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.789558] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.789825] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.807078] ACPI: Battery Slot [BAT0] (battery present)
[ 7.808420] ACPI: AC Adapter [AC0] (off-line)
[ 7.829079] pci 0000:00:00.0: Intel 945GME Chipset
[ 7.829122] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 7.829237] pci 0000:00:00.0: detected 8192K stolen memory
[ 7.829317] [drm] Memory usable by graphics device = 256M
[ 7.829329] [drm] Replacing VGA console driver
[ 7.831303] Console: switching to colour dummy device 80x25
[ 7.840124] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.840135] [drm] Driver supports precise vblank timestamp query.
[ 7.842061] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.924313] [drm] RC6 disabled, disabling runtime PM support
[ 7.924402] [drm] initialized overlay support
[ 7.969502] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 7.970164] fbcon: inteldrmfb (fb0) is primary device
[ 7.971029] intel_rng: FWH not detected
[ 8.011234] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20160422/utaddress-255)
[ 8.011250] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.SBRG.PMS0) (20160422/utaddress-255)
[ 8.011254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.011271] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20160422/utaddress-255)
[ 8.011274] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.011288] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20160422/utaddress-255)
[ 8.011291] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.011293] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.017708] leds_ss4200: no LED devices found
[ 8.159213] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20160422/utaddress-255)
[ 8.159228] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.SMRG) (20160422/utaddress-255)
[ 8.159232] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.213386] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 8.213626] sd 1:0:1:0: Attached scsi generic sg1 type 0
[ 8.219478] rt2800pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.219775] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0200 detected
[ 8.241119] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0003 detected
[ 8.241729] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 8.289554] media: Linux media interface: v0.10
[ 8.308428] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.355700] Linux video capture interface: v2.00
[ 8.403534] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
[ 8.425763] uvcvideo 5-8:1.0: Entity type for entity Extension 5 was not initialized!
[ 8.425778] uvcvideo 5-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 8.425787] uvcvideo 5-8:1.0: Entity type for entity Processing 3 was not initialized!
[ 8.425796] uvcvideo 5-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.427000] input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb5/5-8/5-8:1.0/input/input12
[ 8.427360] usbcore: registered new interface driver uvcvideo
[ 8.427362] USB Video Class driver (1.1.1)
[ 8.486819] intel_powerclamp: No package C-state available
[ 8.693100] intel_powerclamp: No package C-state available
[ 8.693108] Console: switching to colour frame buffer device 128x37
[ 8.728131] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.473269] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.474476] iTCO_vendor_support: vendor-support=0
[ 9.476548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.476671] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860)
[ 9.479803] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.943715] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
[ 9.949219] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
[ 9.949240] eeepc_laptop: Get control methods supported: 0x6101713
[ 9.956837] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input13
[ 10.064093] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.224249] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 10.237720] Adding 1733004k swap on /home/decharge/fichier_de_swap. Priority:-1 extents:77 across:13828096k SSFS
[ 10.316259] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.280530] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 11.385669] eeepc_laptop: BIOS says wireless lan is unblocked, but the pci device is absent
[ 11.385683] eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model
[ 11.386788] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 12.080764] apm: BIOS not found.
[ 12.704355] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 12.808750] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 15.075293] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[ 15.169201] rt2800pci 0000:01:00.0: firmware: direct-loading firmware rt2860.bin
[ 15.169227] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[ 17.061914] wlan0: associated
[ 17.372011] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Reply to: