--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-video-r128: ATI Rage VR PR not detected by r128 on Imac G3
- From: Jerome Andrieux <jerome.andrieux@gmail.com>
- Date: Mon, 31 Aug 2009 15:07:52 +0200
- Message-id: <20090831130752.11618.61776.reportbug@ajoke>
Package: xserver-xorg-video-r128
Version: 6.8.1-1
Severity: important
Bonjour,
with the latest dist-upgrade (sid PPC), xorg r128 driver failed to
detect the Imac G3 ATI Rage 128 Pro VR PR and thus start xorg.
r128 used to handle this system pretty nicely, when using the "forcepci mode"
and "usefbdev" set to false. I tried to change parameters in xorg,
commenting in/out, including PCI Id, FBDev, pci mode ... No luck so far.
For now, the system seems to run nicely on FBDev, very slowly however.
lspci -v reports :
0000:00:10.0 Display controller: ATI Technologies Inc Rage 128 PR/PRO AGP 4x TMDS
Subsystem: ATI Technologies Inc Rage 128 PR/PRO AGP 4x TMDS
Flags: bus master, stepping, 66MHz, medium devsel, latency 255, IRQ 48
Memory at 94000000 (32-bit, prefetchable) [size=64M]
I/O ports at 0400 [size=256]
Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 90020000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2
Kernel driver in use: aty128fb
>From a previously working setup log :
X.Org X Server 1.4.2
...
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 6.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
...
(II) R128: Driver for ATI Rage 128 chipsets:
...
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
...
(II) Primary Device is: PCI 00:10:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro VR PR (PCI) found
...
(II) R128(0): PCI bus 0 card 16 func 0
(II) R128(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp
pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "NoAccel" "False"
(**) R128(0): Option "ForcePCIMode" "true"
(**) R128(0): Option "UseFBDev" "False"
(II) R128(0): VGAAccess option set to FALSE, VGA module load
skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
Without a PciID in xorg.conf, autoprobe fails with a "No devices
detected" message from r128.
If BusID is set to "PCI:00:10:00", it fails just the same.
If BusID is set to "PCI:00:16:00", it fails with a more interesting
message :
(II) R128(0): initializing int10
Backtrace:
0: /usr/bin/X11/X(xorg_backtrace+0x50) [0x101073c0]
1: /usr/bin/X11/X(xf86SigHandler+0x68) [0x1008d108]
2: [0x100364]
3: /usr/lib/xorg/modules//libint10.so(xf86ExtendedInitInt10+0x2d0)
[0xf6d99a0]
4: /usr/lib/xorg/modules//libint10.so(xf86InitInt10+0x28) [0xf6d5408]
5: /usr/lib/xorg/modules/drivers//r128_drv.so(R128PreInit+0x5fc)
[0xf72f3ac]
6: /usr/bin/X11/X(InitOutput+0xf90) [0x100723c0]
7: /usr/bin/X11/X(main+0x214) [0x10028b54]
8: /lib/libc.so.6 [0xfa18b24]
9: /lib/libc.so.6 [0xfa18d14]
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 fév 23 2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1921096 aoû 6 21:18 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 2218 aoû 31 12:36 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "mac-usb"
Option "XkbLayout" "fr"
#Option "XkbVariant" "oss"
Option "XkbOptions" "lv3:lwin_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
#Driver "r128"
#Option "NoAccel" "False"
Option "UseFBDev" "False"
Option "ForcePCIMode" "true"
BusID "PCI:00:16:00"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 60-60
VertRefresh 75-117
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
DefaultDepth 24
EndSection
Section "Module"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 30270 aoû 27 02:20 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 12075 aoû 31 12:36 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-powerpc-smp ppc Debian
Current Operating System: Linux ajoke 2.6.30-1-powerpc #1 Sat Aug 15 16:56:55 CEST 2009 ppc
Build Date: 06 August 2009 06:49:53PM
xorg-server 2:1.6.3-1+b1 (buildd@voltaire)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 31 12:36:36 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xe90
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 2 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 2 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 2 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 2 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 2 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 2 0x00000000 - 0x00000000 (0x1) IX[B]
[14] -1 1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
Primary device is not PCI
(==) Matched fbdev for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.4.0
ABI class: X.Org Video Driver, version 5.0
(II) FBDEV: driver for framebuffer: fbdev
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.0.2
ABI class: X.Org Video Driver, version 5.0
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) FBDEV(0): Depth 24, (--) framebuffer bpp 32
(==) FBDEV(0): RGB weight 888
(==) FBDEV(0): Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: ATY Rage128 (video memory: 8192kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
(**) FBDEV(0): Built-in mode "current": 78.7 MHz, 60.0 kHz, 75.0 Hz
(II) FBDEV(0): Modeline "current"x0.0 78.74 1024 1056 1152 1312 768 769 772 800 +hsync +vsync -csync (60.0 kHz)
(==) FBDEV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(==) FBDEV(0): Backing store disabled
(II) FBDEV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device PMU
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) PMU: always reports core events
(**) PMU: Device: "/dev/input/event1"
(II) PMU: Found keys
(II) PMU: Configuring as keyboard
(II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "macintosh"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Mitsumi Electric Apple Extended USB Keyboard
(**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
(**) Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event3"
(II) Mitsumi Electric Apple Extended USB Keyboard: Found keys
(II) Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "macintosh"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Mitsumi Electric Apple Extended USB Keyboard
(**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
(**) Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event2"
(II) Mitsumi Electric Apple Extended USB Keyboard: Found keys
(II) Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "macintosh"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event4"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) USB Optical Mouse: initialized for relative axes.
HAL Information (lshal):
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
access_control.file = '/dev/input/event0' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys', 'input.switch'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PMU' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event1' (string)
input.product = 'PMU' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'fr' (string)
input.xkb.model = 'macintosh' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_15ca_c3_noserial_if0_logicaldev_input'
access_control.file = '/dev/input/event4' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_15ca_c3_noserial_if0' (string)
info.product = 'USB Optical Mouse' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_15ca_c3_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event4' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_15ca_c3_noserial_if0' (string)
input.product = 'USB Optical Mouse' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if0_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if0' (string)
info.product = 'Mitsumi Electric Apple Extended USB Keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event2' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if0' (string)
input.product = 'Mitsumi Electric Apple Extended USB Keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'fr' (string)
input.xkb.model = 'macintosh' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if1_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if1' (string)
info.product = 'Mitsumi Electric Apple Extended USB Keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if1_logicaldev_input' (string)
input.device = '/dev/input/event3' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_5ac_205_noserial_if1' (string)
input.product = 'Mitsumi Electric Apple Extended USB Keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'fr' (string)
input.xkb.model = 'macintosh' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:19.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input3/event3' (string)
DRM Information from dmesg:
[ 8.532688] Linux agpgart interface v0.103
[ 8.567813] agpgart-uninorth 0000:00:0b.0: Apple UniNorth chipset
[ 8.574509] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
[ 8.580913] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.30-1-powerpc
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-r128 depends on:
ii libc6 2.9-25 GNU C Library: Shared libraries
ii xserver-xorg-core 2:1.6.3-1+b1 Xorg X server - core server
xserver-xorg-video-r128 recommends no packages.
Versions of packages xserver-xorg-video-r128 suggests:
pn firmware-linux <none> (no description available)
-- no debconf information
--- End Message ---