Bug#839177: xserver-xorg-video-intel: Crash at GDM, "Oh no! Something went wrong!" after fresh Jessie install on HP Notebook 15-ac018ca CND5300D6X
Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20160706-1~bpo8+1
Followup-For: Bug #839177
Dear Maintainer,
I've also installed kernel 4.7 from backports (4.6 was not available via installation of the linux-image-amd64 package), now GDM starts normally, acceleration also seems to work normally.
I did:
sudo apt install linux-image-4.7.0-0.bpo.1-amd64-unsigned -t jessie-backports
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Sep 29 15:16 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2401376 Feb 10 2015 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 0
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.7.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.7.2-1~bpo8+1 (2016-09-07)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 4351 Sep 29 16:35 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 20382 Sep 29 16:43 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 19.984]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 19.984] X Protocol Version 11, Revision 0
[ 19.984] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 19.984] Current Operating System: Linux debian-paul 4.7.0-0.bpo.1-amd64 #1 SMP Debian 4.7.2-1~bpo8+1 (2016-09-07) x86_64
[ 19.984] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-0.bpo.1-amd64 root=UUID=3b1cdc98-2b19-4b43-aecb-acac3dc98ee9 ro quiet
[ 19.984] Build Date: 11 February 2015 12:32:02AM
[ 19.984] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 19.984] Current version of pixman: 0.32.6
[ 19.984] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.984] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.984] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 29 16:43:11 2016
[ 20.080] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.142] (==) No Layout section. Using the first Screen section.
[ 20.142] (==) No screen section available. Using defaults.
[ 20.142] (**) |-->Screen "Default Screen Section" (0)
[ 20.142] (**) | |-->Monitor "<default monitor>"
[ 20.147] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.148] (==) Automatically adding devices
[ 20.148] (==) Automatically enabling devices
[ 20.148] (==) Automatically adding GPU devices
[ 20.175] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 20.175] Entry deleted from font path.
[ 20.182] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 20.182] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.182] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.199] (II) Loader magic: 0x557d48fb8d80
[ 20.199] (II) Module ABI versions:
[ 20.199] X.Org ANSI C Emulation: 0.4
[ 20.199] X.Org Video Driver: 18.0
[ 20.199] X.Org XInput driver : 21.0
[ 20.199] X.Org Server Extension : 8.0
[ 20.200] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.203] (--) PCI:*(0:0:2:0) 8086:22b1:103c:80c5 rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 20.204] (II) LoadModule: "glx"
[ 20.205] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.422] (II) Module glx: vendor="X.Org Foundation"
[ 20.423] compiled for 1.16.4, module version = 1.0.0
[ 20.423] ABI class: X.Org Server Extension, version 8.0
[ 20.423] (==) AIGLX enabled
[ 20.423] (==) Matched intel as autoconfigured driver 0
[ 20.423] (==) Matched intel as autoconfigured driver 1
[ 20.423] (==) Matched modesetting as autoconfigured driver 2
[ 20.423] (==) Matched fbdev as autoconfigured driver 3
[ 20.423] (==) Matched vesa as autoconfigured driver 4
[ 20.423] (==) Assigned the driver to the xf86ConfigLayout
[ 20.423] (II) LoadModule: "intel"
[ 20.459] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.517] (II) Module intel: vendor="X.Org Foundation"
[ 20.517] compiled for 1.16.4, module version = 2.99.917
[ 20.517] Module class: X.Org Video Driver
[ 20.518] ABI class: X.Org Video Driver, version 18.0
[ 20.518] (II) LoadModule: "modesetting"
[ 20.518] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 20.536] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.536] compiled for 1.16.4, module version = 0.9.0
[ 20.536] Module class: X.Org Video Driver
[ 20.536] ABI class: X.Org Video Driver, version 18.0
[ 20.536] (II) LoadModule: "fbdev"
[ 20.537] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.538] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.538] compiled for 1.15.99.904, module version = 0.4.4
[ 20.538] Module class: X.Org Video Driver
[ 20.538] ABI class: X.Org Video Driver, version 18.0
[ 20.539] (II) LoadModule: "vesa"
[ 20.539] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.540] (II) Module vesa: vendor="X.Org Foundation"
[ 20.540] compiled for 1.15.99.904, module version = 2.3.3
[ 20.540] Module class: X.Org Video Driver
[ 20.540] ABI class: X.Org Video Driver, version 18.0
[ 20.540] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 20.541] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 20.542] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 20.542] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 20.542] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.542] (II) FBDEV: driver for framebuffer: fbdev
[ 20.542] (II) VESA: driver for VESA chipsets: vesa
[ 20.542] (++) using VT number 7
[ 20.566] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160425
[ 20.566] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160706-1~bpo8+1 (Vincent Cheng <vcheng@debian.org>)
[ 20.566] (II) intel(0): SNA compiled for use with valgrind
[ 20.567] (WW) Falling back to old probe method for modesetting
[ 20.567] (WW) Falling back to old probe method for fbdev
[ 20.567] (II) Loading sub module "fbdevhw"
[ 20.567] (II) LoadModule: "fbdevhw"
[ 20.568] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.586] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.586] compiled for 1.16.4, module version = 0.0.2
[ 20.586] ABI class: X.Org Video Driver, version 18.0
[ 20.586] (WW) Falling back to old probe method for vesa
[ 20.608] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 20.608] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 20.608] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.608] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.608] (==) intel(0): RGB weight 888
[ 20.608] (==) intel(0): Default visual is TrueColor
[ 20.609] (II) intel(0): Output eDP1 has no monitor section
[ 20.628] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 20.628] (II) intel(0): Enabled output eDP1
[ 20.629] (II) intel(0): Output DP1 has no monitor section
[ 20.629] (II) intel(0): Enabled output DP1
[ 20.630] (II) intel(0): Output HDMI1 has no monitor section
[ 20.630] (II) intel(0): Enabled output HDMI1
[ 20.631] (II) intel(0): Output DP2 has no monitor section
[ 20.631] (II) intel(0): Enabled output DP2
[ 20.631] (II) intel(0): Output HDMI2 has no monitor section
[ 20.631] (II) intel(0): Enabled output HDMI2
[ 20.631] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 20.632] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 20.632] (II) intel(0): Enabled output VIRTUAL1
[ 20.632] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 1
[ 20.633] (==) intel(0): TearFree disabled
[ 20.634] (==) intel(0): DPI set to (96, 96)
[ 20.634] (II) Loading sub module "dri2"
[ 20.634] (II) LoadModule: "dri2"
[ 20.634] (II) Module "dri2" already built-in
[ 20.634] (II) Loading sub module "present"
[ 20.635] (II) LoadModule: "present"
[ 20.635] (II) Module "present" already built-in
[ 20.635] (II) UnloadModule: "modesetting"
[ 20.636] (II) Unloading modesetting
[ 20.636] (II) UnloadModule: "fbdev"
[ 20.636] (II) Unloading fbdev
[ 20.636] (II) UnloadSubModule: "fbdevhw"
[ 20.637] (II) Unloading fbdevhw
[ 20.637] (II) UnloadModule: "vesa"
[ 20.637] (II) Unloading vesa
[ 20.638] (==) Depth 24 pixmap format is 32 bpp
[ 20.663] (II) intel(0): SNA initialized with Cherryview (gen8) backend
[ 20.663] (==) intel(0): Backing store enabled
[ 20.663] (==) intel(0): Silken mouse enabled
[ 20.663] (II) intel(0): HW Cursor enabled
[ 20.663] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.664] (==) intel(0): DPMS enabled
[ 20.665] (==) intel(0): Display hotplug detection enabled
[ 20.665] (II) intel(0): [DRI2] Setup complete
[ 20.665] (II) intel(0): [DRI2] DRI driver: i965
[ 20.665] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 20.665] (II) intel(0): direct rendering: DRI2 enabled
[ 20.665] (II) intel(0): hardware support for Present enabled
[ 20.665] (--) RandR disabled
[ 20.678] (II) SELinux: Disabled on system
[ 21.305] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.305] (II) AIGLX: enabled GLX_ARB_create_context
[ 21.305] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 21.306] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 21.306] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.306] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.306] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 21.306] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 21.306] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.306] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 21.306] (II) AIGLX: Loaded and initialized i965
[ 21.306] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.335] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 21.335] (II) intel(0): Setting screen physical size to 361 x 203
[ 22.061] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 22.061] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.061] (II) LoadModule: "evdev"
[ 22.062] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.235] (II) Module evdev: vendor="X.Org Foundation"
[ 22.235] compiled for 1.16.0, module version = 2.9.0
[ 22.235] Module class: X.Org XInput Driver
[ 22.235] ABI class: X.Org XInput driver, version 21.0
[ 22.235] (II) Using input driver 'evdev' for 'Power Button'
[ 22.236] (**) Power Button: always reports core events
[ 22.236] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 22.236] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.236] (--) evdev: Power Button: Found keys
[ 22.236] (II) evdev: Power Button: Configuring as keyboard
[ 22.236] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 22.236] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 22.236] (**) Option "xkb_rules" "evdev"
[ 22.236] (**) Option "xkb_model" "pc105"
[ 22.236] (**) Option "xkb_layout" "us"
[ 22.238] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 22.238] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 22.238] (II) Using input driver 'evdev' for 'Video Bus'
[ 22.238] (**) Video Bus: always reports core events
[ 22.238] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 22.238] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 22.238] (--) evdev: Video Bus: Found keys
[ 22.238] (II) evdev: Video Bus: Configuring as keyboard
[ 22.238] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[ 22.238] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 22.238] (**) Option "xkb_rules" "evdev"
[ 22.238] (**) Option "xkb_model" "pc105"
[ 22.238] (**) Option "xkb_layout" "us"
[ 22.239] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 22.240] (II) No input driver specified, ignoring this device.
[ 22.240] (II) This device may have been added with another device file.
[ 22.242] (II) config/udev: Adding input device HP Webcam (/dev/input/event8)
[ 22.242] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[ 22.242] (II) Using input driver 'evdev' for 'HP Webcam'
[ 22.242] (**) HP Webcam: always reports core events
[ 22.242] (**) evdev: HP Webcam: Device: "/dev/input/event8"
[ 22.242] (--) evdev: HP Webcam: Vendor 0x5c8 Product 0x22a
[ 22.242] (--) evdev: HP Webcam: Found keys
[ 22.242] (II) evdev: HP Webcam: Configuring as keyboard
[ 22.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8"
[ 22.242] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 8)
[ 22.242] (**) Option "xkb_rules" "evdev"
[ 22.242] (**) Option "xkb_model" "pc105"
[ 22.243] (**) Option "xkb_layout" "us"
[ 22.244] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 22.244] (II) No input driver specified, ignoring this device.
[ 22.244] (II) This device may have been added with another device file.
[ 22.244] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 22.244] (II) No input driver specified, ignoring this device.
[ 22.244] (II) This device may have been added with another device file.
[ 22.245] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 22.245] (II) No input driver specified, ignoring this device.
[ 22.245] (II) This device may have been added with another device file.
[ 22.245] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 22.245] (II) No input driver specified, ignoring this device.
[ 22.245] (II) This device may have been added with another device file.
[ 22.246] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 22.246] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 22.246] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 22.246] (**) AT Translated Set 2 keyboard: always reports core events
[ 22.246] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 22.246] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 22.246] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 22.246] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 22.246] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 22.246] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 22.246] (**) Option "xkb_rules" "evdev"
[ 22.246] (**) Option "xkb_model" "pc105"
[ 22.246] (**) Option "xkb_layout" "us"
[ 22.248] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 22.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 22.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 22.248] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 22.248] (II) LoadModule: "synaptics"
[ 22.248] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22.261] (II) Module synaptics: vendor="X.Org Foundation"
[ 22.261] compiled for 1.16.0.901, module version = 1.8.99
[ 22.261] Module class: X.Org XInput Driver
[ 22.261] ABI class: X.Org XInput driver, version 21.0
[ 22.261] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 22.261] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.261] (**) Option "Device" "/dev/input/event1"
[ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1330 - 5652 (res 40)
[ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1094 - 4846 (res 89)
[ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 22.280] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 22.281] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 22.281] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.281] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 22.308] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 22.309] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 22.309] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 22.309] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 22.312] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 22.313] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.315] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 22.315] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 22.317] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 22.317] (II) No input driver specified, ignoring this device.
[ 22.317] (II) This device may have been added with another device file.
[ 22.320] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[ 22.321] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[ 22.321] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[ 22.321] (**) HP Wireless hotkeys: always reports core events
[ 22.321] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event4"
[ 22.321] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[ 22.321] (--) evdev: HP Wireless hotkeys: Found keys
[ 22.321] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[ 22.321] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4"
[ 22.321] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 11)
[ 22.322] (**) Option "xkb_rules" "evdev"
[ 22.322] (**) Option "xkb_model" "pc105"
[ 22.322] (**) Option "xkb_layout" "us"
[ 22.324] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 22.324] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 22.324] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 22.324] (**) HP WMI hotkeys: always reports core events
[ 22.324] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[ 22.325] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 22.325] (--) evdev: HP WMI hotkeys: Found keys
[ 22.325] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 22.325] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[ 22.325] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 22.325] (**) Option "xkb_rules" "evdev"
[ 22.325] (**) Option "xkb_model" "pc105"
[ 22.325] (**) Option "xkb_layout" "us"
[ 22.635] (II) intel(0): EDID vendor "SDC", prod id 20049
[ 22.636] (II) intel(0): Printing DDC gathered Modelines:
[ 22.636] (II) intel(0): Modeline "1366x768"x0.0 77.20 1366 1430 1478 1616 768 770 775 792 -hsync -vsync (47.8 kHz eP)
[ 22.636] (II) intel(0): Modeline "1366x768"x0.0 51.51 1366 1430 1478 1626 768 770 775 792 -hsync -vsync (31.7 kHz e)
[ 30.440] (II) intel(0): switch to mode 1366x768@60.3 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 52.272] (II) AIGLX: Suspending AIGLX clients for VT switch
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=58955
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=29241
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=10317
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=37397
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=55766
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=25179
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_Webcam
E: ID_MODEL_ENC=HP\x20Webcam
E: ID_MODEL_ID=022a
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=0101
E: ID_SERIAL=Generic_HP_Webcam_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Generic
E: ID_VENDOR_ENC=Generic
E: ID_VENDOR_ID=05c8
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v05C8p022Ae0101-e0,1,kD4,ramlsfw
E: NAME="HP Webcam"
E: PHYS="usb-0000:00:14.0-3/button"
E: PRODUCT=3/5c8/22a/101
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=937491
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8
N: input/event8
S: input/by-id/usb-Generic_HP_Webcam_200901010001-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Generic_HP_Webcam_200901010001-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_Webcam
E: ID_MODEL_ENC=HP\x20Webcam
E: ID_MODEL_ID=022a
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=0101
E: ID_SERIAL=Generic_HP_Webcam_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Generic
E: ID_VENDOR_ENC=Generic
E: ID_VENDOR_ID=05c8
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=937566
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0282e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/282/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=516169
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=518980
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=521309
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=521389
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=521462
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=521534
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=521612
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=521682
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=20000 20 0 0 1500f02100000 3803078f900d401 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D4,D9,E0,E1,E2,E3,EC,EE,F0,185,1D1,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=62113
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_81=fn_esc
E: KEYBOARD_KEY_89=battery
E: KEYBOARD_KEY_8a=screenlock
E: KEYBOARD_KEY_8b=camera
E: KEYBOARD_KEY_8c=media
E: KEYBOARD_KEY_8e=dvd
E: KEYBOARD_KEY_92=brightnessdown
E: KEYBOARD_KEY_97=brightnessup
E: KEYBOARD_KEY_b1=help
E: KEYBOARD_KEY_b3=unknown
E: KEYBOARD_KEY_d7=wlan
E: KEYBOARD_KEY_ee=switchvideomode
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17097
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input2
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input2
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e520 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=1
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=61605
P: /devices/platform/i8042/serio1/input/input2/event1
N: input/event1
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=21129
P: /devices/platform/i8042/serio1/input/input2/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=62305
P: /devices/platform/pcspkr/input/input7
E: DEVPATH=/devices/platform/pcspkr/input/input7
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=53818
P: /devices/platform/pcspkr/input/input7/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/pcspkr/input/input7/event6
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=57964
P: /devices/virtual/input/input5
E: DEVPATH=/devices/virtual/input/input5
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=80000000000000 0 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,kF7,ramlsfw
E: NAME="HP Wireless hotkeys"
E: PHYS="hpq6001/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=92616
P: /devices/virtual/input/input5/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/virtual/input/input5/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=33325
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/virtual/input/input8
E: DEVPATH=/devices/virtual/input/input8
E: EV=33
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=4000000000 0 1000700000000 2102400 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,8D,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5,
E: MSC=10
E: NAME="HP WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=22
E: TAGS=:seat:
E: USEC_INITIALIZED=476860
P: /devices/virtual/input/input8/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/virtual/input/input8/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=477810
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 1.618998] Linux agpgart interface v0.103
[ 8.665806] [drm] Initialized drm 1.1.0 20060810
[ 8.803653] [drm] Memory usable by graphics device = 2048M
[ 8.803665] fb: switching to inteldrmfb from simple
[ 8.803855] [drm] Replacing VGA console driver
[ 8.803976] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.803979] [drm] Driver supports precise vblank timestamp query.
[ 8.952266] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 9.243334] fbcon: inteldrmfb (fb0) is primary device
[ 11.106949] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
-- System Information:
Debian Release: 8.6
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.7.0-0.bpo.1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_CA.UTF-8, LC_CTYPE=fr_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-18+deb8u6
ii libdrm-intel1 2.4.58-2
ii libdrm2 2.4.58-2
ii libpciaccess0 0.13.2-3+b1
ii libpixman-1-0 0.32.6-3
ii libudev1 215-17+deb8u5
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-dri3-0 1.10-3+b1
ii libxcb-sync1 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b2
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii libxshmfence1 1.1-4
ii libxss1 1:1.2.2-1
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.8-2+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: