|
Package:
xserver-xorg-video-intel
Version: 2:2.99.917+git20160522-1~bpo8+1 Severity: normal Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? I tried to use multi-screen at startup. * What exactly did you do (or not do) that was effective (or ineffective)? I plugged an HDMI/VGA cable on my laptop and only the external monitor is detected on boot. The laptop screen is not detected but it displays the same content with the same resolution as the external screen. If I plug/unplug the HDMI/VGA cable the problem disapears and the two monitors are correctly detected. * What was the outcome of this action? I need to plug/unplug the HDMI/VGA cable after each boot. * What outcome did you expect instead? I expect the detection of the two monitors at startup. Best regards. -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Apr 13 13:59 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2401376 Feb 11 2015 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller [8086:22b1] (rev 21) /etc/X11/xorg.conf does not exist. /etc/X11/xorg.conf.d does not exist. /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 4.6.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.6.4-1~bpo8+1 (2016-08-11) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 22039 Aug 29 22:32 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 19.384] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 19.385] X Protocol Version 11, Revision 0 [ 19.385] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 19.385] Current Operating System: Linux hypra-demo-17-clevo 4.6.0-0.bpo.1-amd64 #1 SMP Debian 4.6.4-1~bpo8+1 (2016-08-11) x86_64 [ 19.385] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-amd64 root=UUID=bc0fd5dc-6aee-44ab-ab9f-3d6668ec063f ro quiet [ 19.385] Build Date: 11 February 2015 12:32:02AM [ 19.385] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 19.385] Current version of pixman: 0.32.6 [ 19.385] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.385] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 19.385] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 29 22:32:16 2016 [ 19.419] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 19.460] (==) No Layout section. Using the first Screen section. [ 19.460] (==) No screen section available. Using defaults. [ 19.460] (**) |-->Screen "Default Screen Section" (0) [ 19.460] (**) | |-->Monitor "<default monitor>" [ 19.472] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 19.472] (==) Automatically adding devices [ 19.472] (==) Automatically enabling devices [ 19.472] (==) Automatically adding GPU devices [ 19.499] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 19.499] Entry deleted from font path. [ 19.696] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 19.696] (==) ModulePath set to "/usr/lib/xorg/modules" [ 19.696] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.710] (II) Loader magic: 0x564c0bfc6d80 [ 19.710] (II) Module ABI versions: [ 19.710] X.Org ANSI C Emulation: 0.4 [ 19.710] X.Org Video Driver: 18.0 [ 19.710] X.Org XInput driver : 21.0 [ 19.710] X.Org Server Extension : 8.0 [ 19.711] (II) xfree86: Adding drm device (/dev/dri/card0) [ 19.714] (--) PCI:*(0:0:2:0) 8086:22b1:1558:0945 rev 33, Mem @ 0x80000000/16777216, 0x90000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ 19.735] (II) LoadModule: "glx" [ 19.779] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 20.068] (II) Module glx: vendor="X.Org Foundation" [ 20.069] compiled for 1.16.4, module version = 1.0.0 [ 20.069] ABI class: X.Org Server Extension, version 8.0 [ 20.069] (==) AIGLX enabled [ 20.069] (==) Matched intel as autoconfigured driver 0 [ 20.069] (==) Matched intel as autoconfigured driver 1 [ 20.069] (==) Matched modesetting as autoconfigured driver 2 [ 20.069] (==) Matched fbdev as autoconfigured driver 3 [ 20.069] (==) Matched vesa as autoconfigured driver 4 [ 20.069] (==) Assigned the driver to the xf86ConfigLayout [ 20.069] (II) LoadModule: "intel" [ 20.083] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.152] (II) Module intel: vendor="X.Org Foundation" [ 20.152] compiled for 1.16.4, module version = 2.99.917 [ 20.152] Module class: X.Org Video Driver [ 20.152] ABI class: X.Org Video Driver, version 18.0 [ 20.152] (II) LoadModule: "modesetting" [ 20.152] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 20.160] (II) Module modesetting: vendor="X.Org Foundation" [ 20.160] compiled for 1.16.4, module version = 0.9.0 [ 20.160] Module class: X.Org Video Driver [ 20.160] ABI class: X.Org Video Driver, version 18.0 [ 20.160] (II) LoadModule: "fbdev" [ 20.161] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 20.171] (II) Module fbdev: vendor="X.Org Foundation" [ 20.171] compiled for 1.15.99.904, module version = 0.4.4 [ 20.171] Module class: X.Org Video Driver [ 20.171] ABI class: X.Org Video Driver, version 18.0 [ 20.171] (II) LoadModule: "vesa" [ 20.171] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 20.182] (II) Module vesa: vendor="X.Org Foundation" [ 20.182] compiled for 1.15.99.904, module version = 2.3.3 [ 20.182] Module class: X.Org Video Driver [ 20.182] ABI class: X.Org Video Driver, version 18.0 [ 20.182] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 20.183] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 20.183] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 20.183] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 20.183] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 20.183] (II) FBDEV: driver for framebuffer: fbdev [ 20.183] (II) VESA: driver for VESA chipsets: vesa [ 20.183] (++) using VT number 7 [ 20.210] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160229 [ 20.210] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160522-1~bpo8+1 (Vincent Cheng <vcheng@debian.org>) [ 20.210] (II) intel(0): SNA compiled for use with valgrind [ 20.212] (WW) Falling back to old probe method for modesetting [ 20.213] (WW) Falling back to old probe method for fbdev [ 20.213] (II) Loading sub module "fbdevhw" [ 20.213] (II) LoadModule: "fbdevhw" [ 20.213] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 20.221] (II) Module fbdevhw: vendor="X.Org Foundation" [ 20.221] compiled for 1.16.4, module version = 0.0.2 [ 20.221] ABI class: X.Org Video Driver, version 18.0 [ 20.222] (WW) Falling back to old probe method for vesa [ 20.231] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics [ 20.231] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads [ 20.231] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.231] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.231] (==) intel(0): RGB weight 888 [ 20.231] (==) intel(0): Default visual is TrueColor [ 20.233] (II) intel(0): Output eDP1 has no monitor section [ 20.260] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1 [ 20.260] (II) intel(0): Enabled output eDP1 [ 20.260] (II) intel(0): Output HDMI1 has no monitor section [ 20.260] (II) intel(0): Enabled output HDMI1 [ 20.260] (II) intel(0): Output DP1 has no monitor section [ 20.260] (II) intel(0): Enabled output DP1 [ 20.261] (II) intel(0): Output HDMI2 has no monitor section [ 20.261] (II) intel(0): Enabled output HDMI2 [ 20.261] (II) intel(0): Output DP2 has no monitor section [ 20.261] (II) intel(0): Enabled output DP2 [ 20.261] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 20.262] (II) intel(0): Output VIRTUAL1 has no monitor section [ 20.262] (II) intel(0): Enabled output VIRTUAL1 [ 20.262] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0 [ 20.262] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 1 [ 20.263] (==) intel(0): TearFree enabled [ 20.263] (==) intel(0): DPI set to (96, 96) [ 20.263] (II) Loading sub module "dri2" [ 20.263] (II) LoadModule: "dri2" [ 20.263] (II) Module "dri2" already built-in [ 20.263] (II) Loading sub module "present" [ 20.263] (II) LoadModule: "present" [ 20.263] (II) Module "present" already built-in [ 20.264] (II) UnloadModule: "modesetting" [ 20.264] (II) Unloading modesetting [ 20.264] (II) UnloadModule: "fbdev" [ 20.264] (II) Unloading fbdev [ 20.264] (II) UnloadSubModule: "fbdevhw" [ 20.264] (II) Unloading fbdevhw [ 20.264] (II) UnloadModule: "vesa" [ 20.264] (II) Unloading vesa [ 20.265] (==) Depth 24 pixmap format is 32 bpp [ 20.283] (II) intel(0): SNA initialized with Cherryview (gen8) backend [ 20.283] (==) intel(0): Backing store enabled [ 20.283] (==) intel(0): Silken mouse enabled [ 20.283] (II) intel(0): HW Cursor enabled [ 20.283] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.285] (==) intel(0): DPMS enabled [ 20.285] (==) intel(0): Display hotplug detection enabled [ 20.285] (II) intel(0): [DRI2] Setup complete [ 20.285] (II) intel(0): [DRI2] DRI driver: i965 [ 20.285] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 20.285] (II) intel(0): direct rendering: DRI2 enabled [ 20.285] (II) intel(0): hardware support for Present enabled [ 20.285] (--) RandR disabled [ 20.300] (II) SELinux: Disabled on system [ 20.465] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 20.465] (II) AIGLX: enabled GLX_ARB_create_context [ 20.465] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 20.465] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 20.465] (II) AIGLX: enabled GLX_INTEL_swap_event [ 20.465] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 20.465] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 20.465] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 20.465] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 20.465] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 20.465] (II) AIGLX: Loaded and initialized i965 [ 20.465] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.490] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 20.491] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none [ 20.491] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.849] (II) config/udev: Adding input device Power Button (/dev/input/event6) [ 20.849] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.849] (II) LoadModule: "evdev" [ 20.849] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.886] (II) Module evdev: vendor="X.Org Foundation" [ 20.886] compiled for 1.16.0, module version = 2.9.0 [ 20.886] Module class: X.Org XInput Driver [ 20.886] ABI class: X.Org XInput driver, version 21.0 [ 20.886] (II) Using input driver 'evdev' for 'Power Button' [ 20.886] (**) Power Button: always reports core events [ 20.886] (**) evdev: Power Button: Device: "/dev/input/event6" [ 20.887] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.887] (--) evdev: Power Button: Found keys [ 20.887] (II) evdev: Power Button: Configuring as keyboard [ 20.887] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input15/event6" [ 20.887] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 20.887] (**) Option "xkb_rules" "evdev" [ 20.887] (**) Option "xkb_model" "pc105" [ 20.887] (**) Option "xkb_layout" "fr" [ 20.887] (**) Option "xkb_variant" "latin9" [ 20.953] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 20.953] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.953] (II) Using input driver 'evdev' for 'Video Bus' [ 20.953] (**) Video Bus: always reports core events [ 20.953] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 20.953] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 20.953] (--) evdev: Video Bus: Found keys [ 20.953] (II) evdev: Video Bus: Configuring as keyboard [ 20.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event8" [ 20.953] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 20.953] (**) Option "xkb_rules" "evdev" [ 20.953] (**) Option "xkb_model" "pc105" [ 20.953] (**) Option "xkb_layout" "fr" [ 20.953] (**) Option "xkb_variant" "latin9" [ 20.954] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 20.954] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.954] (II) Using input driver 'evdev' for 'Power Button' [ 20.954] (**) Power Button: always reports core events [ 20.954] (**) evdev: Power Button: Device: "/dev/input/event3" [ 20.954] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.954] (--) evdev: Power Button: Found keys [ 20.954] (II) evdev: Power Button: Configuring as keyboard [ 20.954] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event3" [ 20.954] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 20.954] (**) Option "xkb_rules" "evdev" [ 20.954] (**) Option "xkb_model" "pc105" [ 20.954] (**) Option "xkb_layout" "fr" [ 20.954] (**) Option "xkb_variant" "latin9" [ 20.955] (II) config/udev: Adding input device Lid Switch (/dev/input/event4) [ 20.955] (II) No input driver specified, ignoring this device. [ 20.955] (II) This device may have been added with another device file. [ 20.955] (II) config/udev: Adding input device Sleep Button (/dev/input/event5) [ 20.955] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 20.955] (II) Using input driver 'evdev' for 'Sleep Button' [ 20.955] (**) Sleep Button: always reports core events [ 20.955] (**) evdev: Sleep Button: Device: "/dev/input/event5" [ 20.955] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 20.955] (--) evdev: Sleep Button: Found keys [ 20.955] (II) evdev: Sleep Button: Configuring as keyboard [ 20.955] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14/event5" [ 20.955] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 20.955] (**) Option "xkb_rules" "evdev" [ 20.955] (**) Option "xkb_model" "pc105" [ 20.956] (**) Option "xkb_layout" "fr" [ 20.956] (**) Option "xkb_variant" "latin9" [ 20.957] (II) config/udev: Adding input device Chicony USB 2.0 Camera (/dev/input/event9) [ 20.957] (**) Chicony USB 2.0 Camera: Applying InputClass "evdev keyboard catchall" [ 20.957] (II) Using input driver 'evdev' for 'Chicony USB 2.0 Camera' [ 20.957] (**) Chicony USB 2.0 Camera: always reports core events [ 20.957] (**) evdev: Chicony USB 2.0 Camera: Device: "/dev/input/event9" [ 20.957] (--) evdev: Chicony USB 2.0 Camera: Vendor 0x4f2 Product 0xb54e [ 20.957] (--) evdev: Chicony USB 2.0 Camera: Found keys [ 20.957] (II) evdev: Chicony USB 2.0 Camera: Configuring as keyboard [ 20.957] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input18/event9" [ 20.957] (II) XINPUT: Adding extended input device "Chicony USB 2.0 Camera" (type: KEYBOARD, id 10) [ 20.957] (**) Option "xkb_rules" "evdev" [ 20.957] (**) Option "xkb_model" "pc105" [ 20.957] (**) Option "xkb_layout" "fr" [ 20.957] (**) Option "xkb_variant" "latin9" [ 20.958] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10) [ 20.958] (II) No input driver specified, ignoring this device. [ 20.958] (II) This device may have been added with another device file. [ 20.958] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11) [ 20.958] (II) No input driver specified, ignoring this device. [ 20.958] (II) This device may have been added with another device file. [ 20.959] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12) [ 20.959] (II) No input driver specified, ignoring this device. [ 20.959] (II) This device may have been added with another device file. [ 20.959] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13) [ 20.959] (II) No input driver specified, ignoring this device. [ 20.959] (II) This device may have been added with another device file. [ 20.960] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 20.960] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 20.960] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 20.960] (**) AT Translated Set 2 keyboard: always reports core events [ 20.960] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 20.960] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 20.960] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 20.960] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 20.960] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 20.960] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11) [ 20.960] (**) Option "xkb_rules" "evdev" [ 20.960] (**) Option "xkb_model" "pc105" [ 20.960] (**) Option "xkb_layout" "fr" [ 20.960] (**) Option "xkb_variant" "latin9" [ 20.961] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event1) [ 20.961] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall" [ 20.961] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall" [ 20.961] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons" [ 20.961] (II) LoadModule: "synaptics" [ 20.961] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 20.977] (II) Module synaptics: vendor="X.Org Foundation" [ 20.977] compiled for 1.16.0.901, module version = 1.8.99 [ 20.977] Module class: X.Org XInput Driver [ 20.977] ABI class: X.Org XInput driver, version 21.0 [ 20.977] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 20.977] (**) ETPS/2 Elantech Touchpad: always reports core events [ 20.977] (**) Option "Device" "/dev/input/event1" [ 21.000] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property [ 21.000] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32) [ 21.000] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1793 (res 33) [ 21.000] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 21.000] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 21.000] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple [ 21.000] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 21.001] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 21.001] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 21.001] (**) ETPS/2 Elantech Touchpad: always reports core events [ 21.024] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input8/event1" [ 21.024] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12) [ 21.025] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 21.025] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75 [ 21.025] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.054 [ 21.028] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1 [ 21.028] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1 [ 21.028] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 21.028] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 21.029] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 21.030] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 21.031] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates" [ 21.032] (II) config/udev: Adding input device PC Speaker (/dev/input/event7) [ 21.033] (II) No input driver specified, ignoring this device. [ 21.033] (II) This device may have been added with another device file. [ 21.036] (II) config/udev: Adding input device BRLTTY 5.2dev Linux Screen Driver Keyboard (/dev/input/event2) [ 21.036] (**) BRLTTY 5.2dev Linux Screen Driver Keyboard: Applying InputClass "evdev keyboard catchall" [ 21.036] (II) Using input driver 'evdev' for 'BRLTTY 5.2dev Linux Screen Driver Keyboard' [ 21.036] (**) BRLTTY 5.2dev Linux Screen Driver Keyboard: always reports core events [ 21.036] (**) evdev: BRLTTY 5.2dev Linux Screen Driver Keyboard: Device: "/dev/input/event2" [ 21.037] (--) evdev: BRLTTY 5.2dev Linux Screen Driver Keyboard: Vendor 0 Product 0 [ 21.037] (--) evdev: BRLTTY 5.2dev Linux Screen Driver Keyboard: Found keys [ 21.037] (II) evdev: BRLTTY 5.2dev Linux Screen Driver Keyboard: Configuring as keyboard [ 21.037] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event2" [ 21.037] (II) XINPUT: Adding extended input device "BRLTTY 5.2dev Linux Screen Driver Keyboard" (type: KEYBOARD, id 13) [ 21.037] (**) Option "xkb_rules" "evdev" [ 21.037] (**) Option "xkb_model" "pc105" [ 21.037] (**) Option "xkb_layout" "fr" [ 21.037] (**) Option "xkb_variant" "latin9" [ 22.264] (II) intel(0): EDID vendor "CMN", prod id 5937 [ 22.264] (II) intel(0): Printing DDC gathered Modelines: [ 22.264] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1940 900 903 908 926 +hsync -vsync (55.6 kHz eP) [ 22.264] (II) intel(0): Modeline "1600x900"x0.0 71.86 1600 1648 1680 1940 900 903 908 926 +hsync -vsync (37.0 kHz e) udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input15 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=45381 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15/event6 N: input/event6 E: BACKSPACE=guess E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input15/event6 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=54852 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b00000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=62967 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event8 N: input/event8 E: BACKSPACE=guess E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event8 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=64956 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=39163 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12/event3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=48702 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13 E: EV=21 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: TAGS=:seat: E: USEC_INITIALIZED=41298 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event4 N: input/event4 E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event4 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=50729 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0E_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=43353 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14/event5 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=52783 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input18 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input18 E: EV=3 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_4_1_0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Chicony_USB_2.0_Camera E: ID_MODEL_ENC=Chicony\x20USB\x202.0\x20Camera E: ID_MODEL_ID=b54e E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=8752 E: ID_SERIAL=Chicony_Electronics_Co._Ltd._Chicony_USB_2.0_Camera E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Chicony_Electronics_Co._Ltd. E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd. E: ID_VENDOR_ID=04f2 E: KEY=100000 0 0 0 E: MODALIAS=input:b0003v04F2pB54Ee8752-e0,1,kD4,ramlsfw E: NAME="Chicony USB 2.0 Camera" E: PHYS="usb-0000:00:14.0-4/button" E: PRODUCT=3/4f2/b54e/8752 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=214218 P: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input18/event9 N: input/event9 S: input/by-id/usb-Chicony_Electronics_Co._Ltd._Chicony_USB_2.0_Camera-event-if00 S: input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-id/usb-Chicony_Electronics_Co._Ltd._Chicony_USB_2.0_Camera-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input18/event9 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Chicony_USB_2.0_Camera E: ID_MODEL_ENC=Chicony\x20USB\x202.0\x20Camera E: ID_MODEL_ID=b54e E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0 E: ID_REVISION=8752 E: ID_SERIAL=Chicony_Electronics_Co._Ltd._Chicony_USB_2.0_Camera E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Chicony_Electronics_Co._Ltd. E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd. E: ID_VENDOR_ID=04f2 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=214423 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19 E: EV=40001 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0001v10ECp0269e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PRODUCT=1/10ec/269/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=497576 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event10 N: input/event10 E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event10 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: USEC_INITIALIZED=497607 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: NAME="HDA Intel PCH Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=10 E: TAGS=:seat: E: USEC_INITIALIZED=499752 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event11 N: input/event11 E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input20/event11 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: USEC_INITIALIZED=499824 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel PCH Front Headphone" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=499901 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event12 N: input/event12 E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event12 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: USEC_INITIALIZED=499963 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=3" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=500305 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event13 N: input/event13 E: DEVNAME=/dev/input/event13 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event13 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=77 E: SUBSYSTEM=input E: USEC_INITIALIZED=500339 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab83 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=95951 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=42280 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/platform/i8042/serio2/input/input8 E: ABS=661800011000003 E: DEVPATH=/devices/platform/i8042/serio2/input/input8 E: EV=b E: ID_FOR_SEAT=input-platform-i8042-serio-2 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-2 E: ID_PATH_TAG=platform-i8042-serio-2 E: ID_SERIAL=noserial E: KEY=e420 10000 0 0 0 0 E: MODALIAS=input:b0011v0002p000Ee0000-e0,1,3,k110,145,14A,14D,14E,14F,ra0,1,18,1C,2F,30,35,36,39,3A,mlsfw E: NAME="ETPS/2 Elantech Touchpad" E: PHYS="isa0060/serio2/input0" E: PRODUCT=11/2/e/0 E: PROP=5 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=19627 P: /devices/platform/i8042/serio2/input/input8/event1 N: input/event1 S: input/by-path/platform-i8042-serio-2-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/platform/i8042/serio2/input/input8/event1 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-2 E: ID_PATH_TAG=platform-i8042-serio-2 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: USEC_INITIALIZED=44437 P: /devices/platform/i8042/serio2/input/input8/mouse0 N: input/mouse0 S: input/by-path/platform-i8042-serio-2-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/platform/i8042/serio2/input/input8/mouse0 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-2 E: ID_PATH_TAG=platform-i8042-serio-2 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=19893 P: /devices/platform/pcspkr/input/input16 E: DEVPATH=/devices/platform/pcspkr/input/input16 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=12133 P: /devices/platform/pcspkr/input/input16/event7 N: input/event7 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/platform/pcspkr/input/input16/event7 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=57064 P: /devices/virtual/input/input11 E: DEVPATH=/devices/virtual/input/input11 E: EV=100003 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: KEY=402000007 ffc03078f800d2a9 f2beffdfffefffff fffffffffffffffe E: MODALIAS=input:b0000v0000p0000e0000-e0,1,14,k71,72,73,74,75,77,79,7C,7D,7E,7F,80,83,85,87,89,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,D9,E2,ramlsfw E: NAME="BRLTTY 5.2dev Linux Screen Driver Keyboard" E: PHYS="pid-204/brltty/14" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=14037 P: /devices/virtual/input/input11/event2 N: input/event2 E: BACKSPACE=guess E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/virtual/input/input11/event2 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: USEC_INITIALIZED=46571 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 DRM Information from dmesg: --------------------------- [ 1.418702] Linux agpgart interface v0.103 [ 8.832872] [drm] Initialized drm 1.1.0 20060810 [ 8.989607] [drm] Memory usable by graphics device = 1024M [ 8.989614] [drm] Replacing VGA console driver [ 8.991740] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.991743] [drm] Driver supports precise vblank timestamp query. [ 9.153818] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0 [ 9.380699] fbcon: inteldrmfb (fb0) is primary device [ 11.252903] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device -- System Information: Debian Release: 8.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.6.0-0.bpo.1-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.19-18+deb8u4 ii libdrm-intel1 2.4.70-1~bpo8+1 ii libdrm2 2.4.70-1~bpo8+1 ii libpciaccess0 0.13.2-3+b1 ii libpixman-1-0 0.32.6-3 ii libudev1 215-17+deb8u4 ii libx11-6 2:1.6.2-3 ii libx11-xcb1 2:1.6.2-3 ii libxcb-dri2-0 1.10-3+b1 ii libxcb-dri3-0 1.10-3+b1 ii libxcb-sync1 1.10-3+b1 ii libxcb-util0 0.3.8-3 ii libxcb1 1.10-3+b1 ii libxcursor1 1:1.1.14-1+b1 ii libxdamage1 1:1.1.4-2+b1 ii libxext6 2:1.3.3-1 ii libxfixes3 1:5.0.1-2+b2 ii libxinerama1 2:1.1.3-1+b1 ii libxrandr2 2:1.4.2-1+b1 ii libxrender1 1:0.9.8-1+b1 ii libxshmfence1 1.1-4 ii libxss1 1:1.2.2-1 ii libxtst6 2:1.2.2-1+b1 ii libxv1 2:1.0.10-1+b1 ii libxvmc1 2:1.0.8-2+b1 ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1 xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information -- Alex ARNAUD Visual-Impairment Project Manager Hypra - "Humanizing technology" |