Bug#832722: xserver-xorg-input-libinput crashes x server if bluetooth keyboard connected when screen is locked
Package: xserver-xorg-input-libinput
Version: 0.19.0-1
Severity: normal
Dear Maintainer,
* What led up to the situation?
I can recreate this with the following steps:
* Lock screen from inside window manager (Openbox)
* Turn off bluetooth keyboard
* Wait about 5 seconds
* Turn on bluetooth keyboard
* Wake system using bluetooth keyboard
* LightDM comes up for login
* Login using bluetooth keyboard
* X crashes at some point and a new X session starts up as if it hadn't slept
I did the sleep-wake cycle a couple of times without the bluetooth keyboard and
couldn't get it to crash.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 12 2015 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Jul 19 23:00 /usr/bin/Xorg
Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 0
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 51312 Jul 28 08:12 /var/log/Xorg.0.log
-rw-r--r-- 1 root root 41862 Jul 28 08:12 /var/log/Xorg.1.log
Contents of Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------
[ 5845.962]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 5845.962] X Protocol Version 11, Revision 0
[ 5845.962] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 5845.962] Current Operating System: Linux firstclown 4.6.0-1-amd64 #1 SMP Debian 4.6.4-1 (2016-07-18) x86_64
[ 5845.962] Kernel command line: BOOT_IMAGE=/vmlinuz-4.6.0-1-amd64 root=/dev/mapper/firstclown--vg-root ro initrd=/install/initrd.gz quiet
[ 5845.962] Build Date: 20 July 2016 05:14:41AM
[ 5845.962] xorg-server 2:1.18.4-1 (http://www.debian.org/support)
[ 5845.962] Current version of pixman: 0.33.6
[ 5845.962] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5845.962] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5845.962] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 28 08:07:44 2016
[ 5845.962] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5845.963] (==) No Layout section. Using the first Screen section.
[ 5845.963] (==) No screen section available. Using defaults.
[ 5845.963] (**) |-->Screen "Default Screen Section" (0)
[ 5845.963] (**) | |-->Monitor "<default monitor>"
[ 5845.963] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5845.963] (==) Automatically adding devices
[ 5845.963] (==) Automatically enabling devices
[ 5845.963] (==) Automatically adding GPU devices
[ 5845.963] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5845.963] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5845.963] Entry deleted from font path.
[ 5845.963] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 5845.963] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5845.963] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5845.963] (II) Loader magic: 0x55a41b900dc0
[ 5845.963] (II) Module ABI versions:
[ 5845.963] X.Org ANSI C Emulation: 0.4
[ 5845.963] X.Org Video Driver: 20.0
[ 5845.963] X.Org XInput driver : 22.1
[ 5845.963] X.Org Server Extension : 9.0
[ 5845.963] (++) using VT number 7
[ 5845.963] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 5845.964] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5845.964] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 5845.965] (--) PCI:*(0:0:2:0) 8086:1916:1028:06ff rev 7, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 5845.965] (II) LoadModule: "glx"
[ 5845.965] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5845.967] (II) Module glx: vendor="X.Org Foundation"
[ 5845.967] compiled for 1.18.4, module version = 1.0.0
[ 5845.967] ABI class: X.Org Server Extension, version 9.0
[ 5845.967] (==) AIGLX enabled
[ 5845.967] (==) Matched modesetting as autoconfigured driver 0
[ 5845.967] (==) Matched fbdev as autoconfigured driver 1
[ 5845.967] (==) Matched vesa as autoconfigured driver 2
[ 5845.967] (==) Assigned the driver to the xf86ConfigLayout
[ 5845.967] (II) LoadModule: "modesetting"
[ 5845.967] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5845.967] (II) Module modesetting: vendor="X.Org Foundation"
[ 5845.967] compiled for 1.18.4, module version = 1.18.4
[ 5845.967] Module class: X.Org Video Driver
[ 5845.967] ABI class: X.Org Video Driver, version 20.0
[ 5845.967] (II) LoadModule: "fbdev"
[ 5845.967] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5845.967] (II) Module fbdev: vendor="X.Org Foundation"
[ 5845.967] compiled for 1.18.0, module version = 0.4.4
[ 5845.967] Module class: X.Org Video Driver
[ 5845.967] ABI class: X.Org Video Driver, version 20.0
[ 5845.967] (II) LoadModule: "vesa"
[ 5845.967] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5845.967] (II) Module vesa: vendor="X.Org Foundation"
[ 5845.967] compiled for 1.18.0, module version = 2.3.4
[ 5845.967] Module class: X.Org Video Driver
[ 5845.967] ABI class: X.Org Video Driver, version 20.0
[ 5845.967] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5845.967] (II) FBDEV: driver for framebuffer: fbdev
[ 5845.967] (II) VESA: driver for VESA chipsets: vesa
[ 5846.224] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 5846.224] (II) modeset(0): using default device
[ 5846.224] (WW) Falling back to old probe method for fbdev
[ 5846.224] (II) Loading sub module "fbdevhw"
[ 5846.224] (II) LoadModule: "fbdevhw"
[ 5846.224] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5846.224] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5846.224] compiled for 1.18.4, module version = 0.0.2
[ 5846.224] ABI class: X.Org Video Driver, version 20.0
[ 5846.224] (WW) Falling back to old probe method for vesa
[ 5846.224] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5846.224] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5846.224] (==) modeset(0): RGB weight 888
[ 5846.225] (==) modeset(0): Default visual is TrueColor
[ 5846.225] (II) Loading sub module "glamoregl"
[ 5846.225] (II) LoadModule: "glamoregl"
[ 5846.225] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5846.234] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5846.234] compiled for 1.18.4, module version = 1.0.0
[ 5846.234] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5846.234] (II) glamor: OpenGL accelerated X.org driver based.
[ 5846.247] (II) glamor: EGL version 1.4 (DRI2):
[ 5846.249] (II) modeset(0): glamor initialized
[ 5846.250] (II) modeset(0): Output eDP-1 has no monitor section
[ 5846.376] (II) modeset(0): Output HDMI-1 has no monitor section
[ 5846.376] (II) modeset(0): EDID for output eDP-1
[ 5846.376] (II) modeset(0): Manufacturer: LGD Model: 4b9 Serial#: 0
[ 5846.376] (II) modeset(0): Year: 2015 Week: 0
[ 5846.376] (II) modeset(0): EDID Version: 1.4
[ 5846.376] (II) modeset(0): Digital Display Input
[ 5846.376] (II) modeset(0): 6 bits per channel
[ 5846.376] (II) modeset(0): Digital interface is DisplayPort
[ 5846.376] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 5846.376] (II) modeset(0): Gamma: 2.20
[ 5846.376] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 5846.376] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 5846.376] (II) modeset(0): First detailed timing is preferred mode
[ 5846.376] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 5846.376] (II) modeset(0): redX: 0.580 redY: 0.350 greenX: 0.340 greenY: 0.560
[ 5846.376] (II) modeset(0): blueX: 0.155 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
[ 5846.376] (II) modeset(0): Manufacturer's mask: 0
[ 5846.376] (II) modeset(0): Supported detailed timing:
[ 5846.376] (II) modeset(0): clock: 138.7 MHz Image Size: 344 x 194 mm
[ 5846.376] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5846.376] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 5846.376] (II) modeset(0): Supported detailed timing:
[ 5846.376] (II) modeset(0): clock: 111.0 MHz Image Size: 344 x 194 mm
[ 5846.376] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5846.376] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 5846.376] (II) modeset(0): KFKV0�156WF6
[ 5846.376] (II) modeset(0): Unknown vendor-specific block 0
[ 5846.376] (II) modeset(0): EDID (in hex):
[ 5846.376] (II) modeset(0): 00ffffffffffff0030e4b90400000000
[ 5846.376] (II) modeset(0): 0019010495221378eaa1c59459578f27
[ 5846.376] (II) modeset(0): 20505400000001010101010101010101
[ 5846.377] (II) modeset(0): 0101010101012e3680a070381f403020
[ 5846.377] (II) modeset(0): 350058c21000001a5c2b80a070381f40
[ 5846.377] (II) modeset(0): 3020350058c21000001a000000fe004b
[ 5846.377] (II) modeset(0): 464b5630803135365746360a00000000
[ 5846.377] (II) modeset(0): 0000413196001000000a010a20200026
[ 5846.377] (II) modeset(0): Printing probed modes for output eDP-1
[ 5846.377] (II) modeset(0): Modeline "1920x1080"x60.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 5846.377] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1920x1080"x48.0 111.00 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
[ 5846.377] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 5846.377] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 5846.377] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 5846.377] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 5846.377] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 5846.377] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 5846.377] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 5846.377] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 5846.377] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 5846.377] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 5846.377] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 5846.377] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 5846.377] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 5846.377] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 5846.377] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 5846.377] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 5846.377] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 5846.377] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 5846.377] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 5846.377] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 5846.504] (II) modeset(0): EDID for output HDMI-1
[ 5846.504] (II) modeset(0): Output eDP-1 connected
[ 5846.504] (II) modeset(0): Output HDMI-1 disconnected
[ 5846.504] (II) modeset(0): Using exact sizes for initial modes
[ 5846.504] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 5846.504] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5846.504] (==) modeset(0): DPI set to (96, 96)
[ 5846.504] (II) Loading sub module "fb"
[ 5846.504] (II) LoadModule: "fb"
[ 5846.504] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5846.505] (II) Module fb: vendor="X.Org Foundation"
[ 5846.505] compiled for 1.18.4, module version = 1.0.0
[ 5846.505] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5846.505] (II) UnloadModule: "fbdev"
[ 5846.505] (II) Unloading fbdev
[ 5846.505] (II) UnloadSubModule: "fbdevhw"
[ 5846.505] (II) Unloading fbdevhw
[ 5846.505] (II) UnloadModule: "vesa"
[ 5846.505] (II) Unloading vesa
[ 5846.505] (==) Depth 24 pixmap format is 32 bpp
[ 5846.600] (==) modeset(0): Backing store enabled
[ 5846.600] (==) modeset(0): Silken mouse enabled
[ 5846.600] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5846.600] (==) modeset(0): DPMS enabled
[ 5846.600] (II) modeset(0): [DRI2] Setup complete
[ 5846.600] (II) modeset(0): [DRI2] DRI driver: i965
[ 5846.600] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 5846.617] (--) RandR disabled
[ 5846.620] (II) SELinux: Disabled on system
[ 5846.624] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5846.624] (II) AIGLX: enabled GLX_ARB_create_context
[ 5846.624] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5846.624] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 5846.624] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5846.624] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5846.624] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 5846.624] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 5846.624] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 5846.624] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5846.624] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 5846.625] (II) AIGLX: Loaded and initialized i965
[ 5846.625] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5846.625] (II) modeset(0): Damage tracking initialized
[ 5846.625] (II) modeset(0): Setting screen physical size to 508 x 285
[ 5846.651] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[ 5846.651] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5846.651] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5846.651] (II) LoadModule: "libinput"
[ 5846.651] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5846.652] (II) Module libinput: vendor="X.Org Foundation"
[ 5846.652] compiled for 1.18.3, module version = 0.19.0
[ 5846.652] Module class: X.Org XInput Driver
[ 5846.652] ABI class: X.Org XInput driver, version 22.1
[ 5846.652] (II) Using input driver 'libinput' for 'Power Button'
[ 5846.652] (**) Power Button: always reports core events
[ 5846.652] (**) Option "Device" "/dev/input/event8"
[ 5846.652] (**) Option "_source" "server/udev"
[ 5846.653] (II) input device 'Power Button', /dev/input/event8 is tagged by udev as: Keyboard
[ 5846.653] (II) input device 'Power Button', /dev/input/event8 is a keyboard
[ 5846.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event8"
[ 5846.668] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5846.668] (**) Option "xkb_model" "pc105"
[ 5846.668] (**) Option "xkb_layout" "us"
[ 5846.668] (**) Option "xkb_variant" "colemak"
[ 5846.668] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5846.683] (II) input device 'Power Button', /dev/input/event8 is tagged by udev as: Keyboard
[ 5846.683] (II) input device 'Power Button', /dev/input/event8 is a keyboard
[ 5846.683] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 5846.683] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5846.683] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5846.683] (II) Using input driver 'libinput' for 'Video Bus'
[ 5846.683] (**) Video Bus: always reports core events
[ 5846.683] (**) Option "Device" "/dev/input/event11"
[ 5846.683] (**) Option "_source" "server/udev"
[ 5846.684] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 5846.684] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 5846.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event11"
[ 5846.700] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5846.700] (**) Option "xkb_model" "pc105"
[ 5846.700] (**) Option "xkb_layout" "us"
[ 5846.700] (**) Option "xkb_variant" "colemak"
[ 5846.700] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5846.700] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 5846.700] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 5846.701] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 5846.701] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5846.701] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5846.701] (II) Using input driver 'libinput' for 'Power Button'
[ 5846.701] (**) Power Button: always reports core events
[ 5846.701] (**) Option "Device" "/dev/input/event6"
[ 5846.701] (**) Option "_source" "server/udev"
[ 5846.701] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 5846.701] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[ 5846.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event6"
[ 5846.712] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5846.712] (**) Option "xkb_model" "pc105"
[ 5846.712] (**) Option "xkb_layout" "us"
[ 5846.712] (**) Option "xkb_variant" "colemak"
[ 5846.712] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5846.712] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 5846.712] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[ 5846.713] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 5846.713] (II) No input driver specified, ignoring this device.
[ 5846.713] (II) This device may have been added with another device file.
[ 5846.713] (II) config/udev: Adding input device Sleep Button (/dev/input/event7)
[ 5846.713] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 5846.713] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 5846.713] (II) Using input driver 'libinput' for 'Sleep Button'
[ 5846.713] (**) Sleep Button: always reports core events
[ 5846.713] (**) Option "Device" "/dev/input/event7"
[ 5846.713] (**) Option "_source" "server/udev"
[ 5846.714] (II) input device 'Sleep Button', /dev/input/event7 is tagged by udev as: Keyboard
[ 5846.714] (II) input device 'Sleep Button', /dev/input/event7 is a keyboard
[ 5846.724] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event7"
[ 5846.724] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 5846.724] (**) Option "xkb_model" "pc105"
[ 5846.724] (**) Option "xkb_layout" "us"
[ 5846.724] (**) Option "xkb_variant" "colemak"
[ 5846.724] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5846.725] (II) input device 'Sleep Button', /dev/input/event7 is tagged by udev as: Keyboard
[ 5846.725] (II) input device 'Sleep Button', /dev/input/event7 is a keyboard
[ 5846.726] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5846.726] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5846.726] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 5846.727] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[ 5846.727] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 5846.728] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 5846.728] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[ 5846.728] (**) USB Optical Mouse: always reports core events
[ 5846.728] (**) Option "Device" "/dev/input/event1"
[ 5846.728] (**) Option "_source" "server/udev"
[ 5846.784] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 5846.784] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 5846.808] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3/event1"
[ 5846.808] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 5846.808] (**) Option "AccelerationScheme" "none"
[ 5846.808] (**) USB Optical Mouse: (accel) selected scheme none/0
[ 5846.808] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 5846.808] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 5846.865] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 5846.865] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 5846.866] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 5846.866] (II) No input driver specified, ignoring this device.
[ 5846.866] (II) This device may have been added with another device file.
[ 5846.867] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event9)
[ 5846.868] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 5846.868] (**) Integrated_Webcam_HD: Applying InputClass "libinput keyboard catchall"
[ 5846.868] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD'
[ 5846.868] (**) Integrated_Webcam_HD: always reports core events
[ 5846.868] (**) Option "Device" "/dev/input/event9"
[ 5846.868] (**) Option "_source" "server/udev"
[ 5846.869] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is tagged by udev as: Keyboard
[ 5846.869] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is a keyboard
[ 5846.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14/event9"
[ 5846.896] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 5846.896] (**) Option "xkb_model" "pc105"
[ 5846.896] (**) Option "xkb_layout" "us"
[ 5846.896] (**) Option "xkb_variant" "colemak"
[ 5846.896] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5846.898] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is tagged by udev as: Keyboard
[ 5846.898] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is a keyboard
[ 5846.900] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Finger (/dev/input/event3)
[ 5846.900] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: Applying InputClass "evdev touchscreen catchall"
[ 5846.900] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: Applying InputClass "libinput touchscreen catchall"
[ 5846.900] (II) Using input driver 'libinput' for 'Wacom Co.,Ltd. Pen and multitouch sensor Finger'
[ 5846.900] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: always reports core events
[ 5846.900] (**) Option "Device" "/dev/input/event3"
[ 5846.900] (**) Option "_source" "server/udev"
[ 5846.957] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is tagged by udev as: Touchscreen
[ 5846.957] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is a touch device
[ 5846.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5/event3"
[ 5846.980] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Pen and multitouch sensor Finger" (type: TOUCHSCREEN, id 12)
[ 5846.980] (**) Option "AccelerationScheme" "none"
[ 5846.980] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: (accel) selected scheme none/0
[ 5846.980] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: (accel) acceleration factor: 2.000
[ 5846.980] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: (accel) acceleration threshold: 4
[ 5847.036] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is tagged by udev as: Touchscreen
[ 5847.036] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is a touch device
[ 5847.036] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Finger (/dev/input/mouse2)
[ 5847.036] (II) No input driver specified, ignoring this device.
[ 5847.036] (II) This device may have been added with another device file.
[ 5847.037] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Pen (/dev/input/event4)
[ 5847.037] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: Applying InputClass "evdev tablet catchall"
[ 5847.037] (II) LoadModule: "evdev"
[ 5847.037] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5847.037] (II) Module evdev: vendor="X.Org Foundation"
[ 5847.037] compiled for 1.18.3, module version = 2.10.2
[ 5847.037] Module class: X.Org XInput Driver
[ 5847.037] ABI class: X.Org XInput driver, version 22.1
[ 5847.037] (II) Using input driver 'evdev' for 'Wacom Co.,Ltd. Pen and multitouch sensor Pen'
[ 5847.037] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: always reports core events
[ 5847.037] (**) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Device: "/dev/input/event4"
[ 5847.092] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Vendor 0x56a Product 0x480d
[ 5847.092] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Found absolute axes
[ 5847.092] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Found x and y absolute axes
[ 5847.092] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Found absolute tablet.
[ 5847.092] (II) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Configuring as tablet
[ 5847.092] (**) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: YAxisMapping: buttons 4 and 5
[ 5847.092] (**) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5847.092] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7/event4"
[ 5847.092] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Pen and multitouch sensor Pen" (type: TABLET, id 13)
[ 5847.092] (II) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: initialized for absolute axes.
[ 5847.092] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) keeping acceleration scheme 1
[ 5847.092] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) acceleration profile 0
[ 5847.092] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) acceleration factor: 2.000
[ 5847.092] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) acceleration threshold: 4
[ 5847.092] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Pen (/dev/input/mouse3)
[ 5847.092] (II) No input driver specified, ignoring this device.
[ 5847.092] (II) This device may have been added with another device file.
[ 5847.093] (II) config/udev: Adding input device Bluetooth Keyboard (/dev/input/event2)
[ 5847.093] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 5847.093] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 5847.093] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 5847.093] (**) Bluetooth Keyboard : always reports core events
[ 5847.093] (**) Option "Device" "/dev/input/event2"
[ 5847.093] (**) Option "_source" "server/udev"
[ 5847.093] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 5847.093] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 5847.116] (II) libinput: Bluetooth Keyboard : needs a virtual subdevice
[ 5847.116] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.0008/input/input35/event2"
[ 5847.116] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: MOUSE, id 14)
[ 5847.116] (**) Option "AccelerationScheme" "none"
[ 5847.116] (**) Bluetooth Keyboard : (accel) selected scheme none/0
[ 5847.116] (**) Bluetooth Keyboard : (accel) acceleration factor: 2.000
[ 5847.116] (**) Bluetooth Keyboard : (accel) acceleration threshold: 4
[ 5847.116] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 5847.116] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 5847.117] (II) config/udev: Adding input device DLL06FF:00 06CB:75C1 Touchpad (/dev/input/event12)
[ 5847.117] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "evdev touchpad catchall"
[ 5847.117] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 5847.117] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5847.117] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "libinput touchscreen catchall"
[ 5847.117] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "touchpad catchall"
[ 5847.117] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "Default clickpad buttons"
[ 5847.117] (II) LoadModule: "synaptics"
[ 5847.117] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 5847.117] (II) Module synaptics: vendor="X.Org Foundation"
[ 5847.117] compiled for 1.18.3, module version = 1.8.3
[ 5847.117] Module class: X.Org XInput Driver
[ 5847.117] ABI class: X.Org XInput driver, version 22.1
[ 5847.117] (II) Using input driver 'synaptics' for 'DLL06FF:00 06CB:75C1 Touchpad'
[ 5847.117] (**) DLL06FF:00 06CB:75C1 Touchpad: always reports core events
[ 5847.117] (**) Option "Device" "/dev/input/event12"
[ 5847.164] (II) synaptics: DLL06FF:00 06CB:75C1 Touchpad: found clickpad property
[ 5847.164] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: x-axis range 0 - 1229 (res 12)
[ 5847.164] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: y-axis range 0 - 929 (res 12)
[ 5847.164] (II) synaptics: DLL06FF:00 06CB:75C1 Touchpad: device does not report pressure, will use touch data.
[ 5847.164] (II) synaptics: DLL06FF:00 06CB:75C1 Touchpad: device does not report finger width.
[ 5847.164] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: buttons: left double triple
[ 5847.164] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: Vendor 0x6cb Product 0x75c1
[ 5847.164] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: invalid pressure range. defaulting to 0 - 255
[ 5847.164] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: invalid finger width range. defaulting to 0 - 15
[ 5847.164] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 5847.164] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: touchpad found
[ 5847.164] (**) DLL06FF:00 06CB:75C1 Touchpad: always reports core events
[ 5847.188] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17/event12"
[ 5847.188] (II) XINPUT: Adding extended input device "DLL06FF:00 06CB:75C1 Touchpad" (type: TOUCHPAD, id 15)
[ 5847.188] (**) synaptics: DLL06FF:00 06CB:75C1 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 5847.188] (**) synaptics: DLL06FF:00 06CB:75C1 Touchpad: (accel) MaxSpeed is now 1.75
[ 5847.188] (**) synaptics: DLL06FF:00 06CB:75C1 Touchpad: (accel) AccelFactor is now 0.130
[ 5847.188] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) keeping acceleration scheme 1
[ 5847.188] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) acceleration profile 1
[ 5847.188] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) acceleration factor: 2.000
[ 5847.188] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) acceleration threshold: 4
[ 5847.188] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: touchpad found
[ 5847.188] (II) config/udev: Adding input device DLL06FF:00 06CB:75C1 Touchpad (/dev/input/mouse4)
[ 5847.189] (**) DLL06FF:00 06CB:75C1 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 5847.189] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 5847.189] (II) No input driver specified, ignoring this device.
[ 5847.189] (II) This device may have been added with another device file.
[ 5847.189] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 5847.189] (II) No input driver specified, ignoring this device.
[ 5847.189] (II) This device may have been added with another device file.
[ 5847.189] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 5847.189] (II) No input driver specified, ignoring this device.
[ 5847.189] (II) This device may have been added with another device file.
[ 5847.190] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 5847.190] (II) No input driver specified, ignoring this device.
[ 5847.190] (II) This device may have been added with another device file.
[ 5847.190] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 5847.190] (II) No input driver specified, ignoring this device.
[ 5847.190] (II) This device may have been added with another device file.
[ 5847.190] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 5847.190] (II) No input driver specified, ignoring this device.
[ 5847.190] (II) This device may have been added with another device file.
[ 5847.191] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 5847.191] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5847.191] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5847.191] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5847.191] (**) AT Translated Set 2 keyboard: always reports core events
[ 5847.191] (**) Option "Device" "/dev/input/event0"
[ 5847.191] (**) Option "_source" "server/udev"
[ 5847.191] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 5847.191] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 5847.212] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 5847.212] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 5847.212] (**) Option "xkb_model" "pc105"
[ 5847.212] (**) Option "xkb_layout" "us"
[ 5847.212] (**) Option "xkb_variant" "colemak"
[ 5847.212] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5847.212] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 5847.212] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 5847.212] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 5847.212] (II) No input driver specified, ignoring this device.
[ 5847.212] (II) This device may have been added with another device file.
[ 5847.215] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 5847.215] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 5847.215] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 5847.215] (**) Bluetooth Keyboard : always reports core events
[ 5847.215] (**) Option "Device" "/dev/input/event2"
[ 5847.216] (**) Option "_source" "_driver/libinput"
[ 5847.216] (II) libinput: Bluetooth Keyboard : is a virtual subdevice
[ 5847.216] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.0008/input/input35/event2"
[ 5847.216] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: KEYBOARD, id 17)
[ 5847.216] (**) Option "xkb_model" "pc105"
[ 5847.216] (**) Option "xkb_layout" "us"
[ 5847.216] (**) Option "xkb_variant" "colemak"
[ 5847.216] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5861.854] (II) config/udev: removing device Bluetooth Keyboard
[ 5861.854] (II) UnloadModule: "libinput"
[ 5861.854] (II) config/udev: removing device Bluetooth Keyboard
[ 5861.876] (II) UnloadModule: "libinput"
[ 5862.423] (II) config/udev: Adding input device Bluetooth Keyboard (/dev/input/event2)
[ 5862.423] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 5862.423] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 5862.423] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 5862.423] (**) Bluetooth Keyboard : always reports core events
[ 5862.423] (**) Option "Device" "/dev/input/event2"
[ 5862.423] (**) Option "_source" "server/udev"
[ 5862.424] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 5862.424] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 5862.444] (II) libinput: Bluetooth Keyboard : needs a virtual subdevice
[ 5862.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.0009/input/input36/event2"
[ 5862.444] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: MOUSE, id 14)
[ 5862.444] (**) Option "AccelerationScheme" "none"
[ 5862.444] (**) Bluetooth Keyboard : (accel) selected scheme none/0
[ 5862.444] (**) Bluetooth Keyboard : (accel) acceleration factor: 2.000
[ 5862.444] (**) Bluetooth Keyboard : (accel) acceleration threshold: 4
[ 5862.464] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 5862.464] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 5862.464] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 5862.464] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 5862.464] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 5862.464] (**) Bluetooth Keyboard : always reports core events
[ 5862.464] (**) Option "Device" "/dev/input/event2"
[ 5862.464] (**) Option "_source" "_driver/libinput"
[ 5862.464] (II) libinput: Bluetooth Keyboard : is a virtual subdevice
[ 5862.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.0009/input/input36/event2"
[ 5862.464] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: KEYBOARD, id 17)
[ 5862.464] (**) Option "xkb_model" "pc105"
[ 5862.464] (**) Option "xkb_layout" "us"
[ 5862.464] (**) Option "xkb_variant" "colemak"
[ 5862.464] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 5880.552] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 5893.457] (II) config/udev: removing device Bluetooth Keyboard
[ 5893.458] (II) UnloadModule: "libinput"
[ 5893.458] (II) config/udev: removing device Bluetooth Keyboard
[ 5893.458] (II) UnloadModule: "libinput"
[ 5914.648] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 5914.654] (II) modeset(0): EDID vendor "LGD", prod id 1209
[ 5914.654] (II) modeset(0): Printing DDC gathered Modelines:
[ 5914.654] (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 5914.654] (II) modeset(0): Modeline "1920x1080"x0.0 111.00 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
[ 5914.782] (II) input device 'Power Button', /dev/input/event8 is tagged by udev as: Keyboard
[ 5914.782] (II) input device 'Power Button', /dev/input/event8 is a keyboard
[ 5914.783] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 5914.783] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 5914.783] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 5914.783] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[ 5914.783] (II) input device 'Sleep Button', /dev/input/event7 is tagged by udev as: Keyboard
[ 5914.783] (II) input device 'Sleep Button', /dev/input/event7 is a keyboard
[ 5914.840] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 5914.840] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 5914.840] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is tagged by udev as: Keyboard
[ 5914.840] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is a keyboard
[ 5914.896] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is tagged by udev as: Touchscreen
[ 5914.896] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is a touch device
[ 5914.952] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: touchpad found
[ 5914.953] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 5914.953] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 5958.438] (II) config/udev: Adding input device Bluetooth Keyboard (/dev/input/event2)
[ 5958.438] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 5958.438] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 5958.438] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 5958.438] (**) Bluetooth Keyboard : always reports core events
[ 5958.438] (**) Option "Device" "/dev/input/event2"
[ 5958.438] (**) Option "_source" "server/udev"
[ 5958.439] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 5958.439] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 5958.476] (II) libinput: Bluetooth Keyboard : needs a virtual subdevice
[ 5958.476] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000A/input/input37/event2"
[ 5958.476] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: MOUSE, id 14)
[ 5958.476] (**) Option "AccelerationScheme" "none"
[ 5958.476] (**) Bluetooth Keyboard : (accel) selected scheme none/0
[ 5958.476] (**) Bluetooth Keyboard : (accel) acceleration factor: 2.000
[ 5958.476] (**) Bluetooth Keyboard : (accel) acceleration threshold: 4
[ 5958.476] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 5958.476] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 5958.476] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 5958.476] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 5958.476] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 5958.476] (**) Bluetooth Keyboard : always reports core events
[ 5958.476] (**) Option "Device" "/dev/input/event2"
[ 5958.476] (**) Option "_source" "_driver/libinput"
[ 5958.476] (II) libinput: Bluetooth Keyboard : is a virtual subdevice
[ 5958.476] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000A/input/input37/event2"
[ 5958.476] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: KEYBOARD, id 17)
[ 5958.476] (**) Option "xkb_model" "pc105"
[ 5958.476] (**) Option "xkb_layout" "us"
[ 5958.477] (**) Option "xkb_variant" "colemak"
[ 5958.477] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6138.581] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 6144.731] (II) config/udev: removing device Bluetooth Keyboard
[ 6144.732] (II) UnloadModule: "libinput"
[ 6144.732] (II) config/udev: removing device Bluetooth Keyboard
[ 6144.733] (II) UnloadModule: "libinput"
[ 6153.239] (II) config/udev: Adding input device Bluetooth Keyboard (/dev/input/event2)
[ 6153.239] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 6153.239] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 6153.239] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 6153.239] (**) Bluetooth Keyboard : always reports core events
[ 6153.239] (**) Option "Device" "/dev/input/event2"
[ 6153.239] (**) Option "_source" "server/udev"
[ 6153.240] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 6153.240] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 6153.256] (II) libinput: Bluetooth Keyboard : needs a virtual subdevice
[ 6153.256] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000B/input/input38/event2"
[ 6153.256] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: MOUSE, id 14)
[ 6153.256] (**) Option "AccelerationScheme" "none"
[ 6153.256] (**) Bluetooth Keyboard : (accel) selected scheme none/0
[ 6153.256] (**) Bluetooth Keyboard : (accel) acceleration factor: 2.000
[ 6153.256] (**) Bluetooth Keyboard : (accel) acceleration threshold: 4
[ 6153.256] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 6153.256] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 6153.257] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 6153.257] (**) Bluetooth Keyboard : always reports core events
[ 6153.257] (**) Option "Device" "/dev/input/event2"
[ 6153.257] (**) Option "_source" "_driver/libinput"
[ 6153.257] (II) libinput: Bluetooth Keyboard : is a virtual subdevice
[ 6153.257] (EE)
[ 6153.257] (EE) Backtrace:
[ 6153.257] (EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x4e) [0x55a41b67450e]
[ 6153.257] (EE) 1: /usr/lib/xorg/Xorg (0x55a41b4c2000+0x1b6899) [0x55a41b678899]
[ 6153.257] (EE) 2: /lib/x86_64-linux-gnu/libc.so.6 (0x7f4c39e3b000+0x33250) [0x7f4c39e6e250]
[ 6153.257] (EE) 3: /usr/lib/x86_64-linux-gnu/libinput.so.10 (libinput_device_config_tap_get_finger_count+0x0) [0x7f4c351ee340]
[ 6153.257] (EE) 4: /usr/lib/xorg/modules/input/libinput_drv.so (0x7f4c35435000+0x6953) [0x7f4c3543b953]
[ 6153.257] (EE) 5: /usr/lib/xorg/Xorg (0x55a41b4c2000+0xa26c8) [0x55a41b5646c8]
[ 6153.257] (EE) 6: /usr/lib/xorg/modules/input/libinput_drv.so (0x7f4c35435000+0x55e7) [0x7f4c3543a5e7]
[ 6153.257] (EE) 7: /usr/lib/xorg/modules/input/libinput_drv.so (0x7f4c35435000+0x582c) [0x7f4c3543a82c]
[ 6153.257] (EE) 8: /usr/lib/xorg/Xorg (ProcessWorkQueue+0x21) [0x55a41b51ab51]
[ 6153.257] (EE) 9: /usr/lib/xorg/Xorg (WaitForSomething+0xad) [0x55a41b67110d]
[ 6153.257] (EE) 10: /usr/lib/xorg/Xorg (0x55a41b4c2000+0x53ade) [0x55a41b515ade]
[ 6153.257] (EE) 11: /usr/lib/xorg/Xorg (0x55a41b4c2000+0x57cb3) [0x55a41b519cb3]
[ 6153.258] (EE) 12: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf0) [0x7f4c39e5b730]
[ 6153.258] (EE) 13: /usr/lib/xorg/Xorg (_start+0x29) [0x55a41b503f99]
[ 6153.258] (EE)
[ 6153.258] (EE) Segmentation fault at address 0x40
[ 6153.258] (EE)
Fatal server error:
[ 6153.258] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 6153.258] (EE)
[ 6153.258] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6153.258] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6153.258] (EE)
[ 6153.258] (EE) Server terminated with error (1). Closing log file.
Contents of most recent Xorg X server log file (/var/log/Xorg.1.log):
---------------------------------------------------------------------
[ 6138.326]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 6138.326] X Protocol Version 11, Revision 0
[ 6138.326] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 6138.326] Current Operating System: Linux firstclown 4.6.0-1-amd64 #1 SMP Debian 4.6.4-1 (2016-07-18) x86_64
[ 6138.326] Kernel command line: BOOT_IMAGE=/vmlinuz-4.6.0-1-amd64 root=/dev/mapper/firstclown--vg-root ro initrd=/install/initrd.gz quiet
[ 6138.326] Build Date: 20 July 2016 05:14:41AM
[ 6138.326] xorg-server 2:1.18.4-1 (http://www.debian.org/support)
[ 6138.327] Current version of pixman: 0.33.6
[ 6138.327] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6138.327] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6138.327] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jul 28 08:12:37 2016
[ 6138.327] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6138.328] (==) No Layout section. Using the first Screen section.
[ 6138.328] (==) No screen section available. Using defaults.
[ 6138.328] (**) |-->Screen "Default Screen Section" (0)
[ 6138.328] (**) | |-->Monitor "<default monitor>"
[ 6138.328] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6138.328] (==) Automatically adding devices
[ 6138.328] (==) Automatically enabling devices
[ 6138.328] (==) Automatically adding GPU devices
[ 6138.328] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 6138.328] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 6138.328] Entry deleted from font path.
[ 6138.329] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 6138.329] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6138.329] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6138.329] (II) Loader magic: 0x55804cf5ddc0
[ 6138.329] (II) Module ABI versions:
[ 6138.329] X.Org ANSI C Emulation: 0.4
[ 6138.329] X.Org Video Driver: 20.0
[ 6138.329] X.Org XInput driver : 22.1
[ 6138.329] X.Org Server Extension : 9.0
[ 6138.331] (++) using VT number 8
[ 6138.331] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 6138.332] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6138.333] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 6138.335] (--) PCI:*(0:0:2:0) 8086:1916:1028:06ff rev 7, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 6138.335] (II) LoadModule: "glx"
[ 6138.336] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6138.339] (II) Module glx: vendor="X.Org Foundation"
[ 6138.339] compiled for 1.18.4, module version = 1.0.0
[ 6138.339] ABI class: X.Org Server Extension, version 9.0
[ 6138.339] (==) AIGLX enabled
[ 6138.339] (==) Matched modesetting as autoconfigured driver 0
[ 6138.339] (==) Matched fbdev as autoconfigured driver 1
[ 6138.339] (==) Matched vesa as autoconfigured driver 2
[ 6138.339] (==) Assigned the driver to the xf86ConfigLayout
[ 6138.339] (II) LoadModule: "modesetting"
[ 6138.340] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 6138.340] (II) Module modesetting: vendor="X.Org Foundation"
[ 6138.340] compiled for 1.18.4, module version = 1.18.4
[ 6138.340] Module class: X.Org Video Driver
[ 6138.340] ABI class: X.Org Video Driver, version 20.0
[ 6138.340] (II) LoadModule: "fbdev"
[ 6138.340] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 6138.340] (II) Module fbdev: vendor="X.Org Foundation"
[ 6138.340] compiled for 1.18.0, module version = 0.4.4
[ 6138.340] Module class: X.Org Video Driver
[ 6138.340] ABI class: X.Org Video Driver, version 20.0
[ 6138.340] (II) LoadModule: "vesa"
[ 6138.340] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 6138.341] (II) Module vesa: vendor="X.Org Foundation"
[ 6138.341] compiled for 1.18.0, module version = 2.3.4
[ 6138.341] Module class: X.Org Video Driver
[ 6138.341] ABI class: X.Org Video Driver, version 20.0
[ 6138.341] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 6138.341] (II) FBDEV: driver for framebuffer: fbdev
[ 6138.341] (II) VESA: driver for VESA chipsets: vesa
[ 6138.613] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 6138.613] (II) modeset(0): using default device
[ 6138.613] (WW) Falling back to old probe method for fbdev
[ 6138.613] (II) Loading sub module "fbdevhw"
[ 6138.613] (II) LoadModule: "fbdevhw"
[ 6138.614] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 6138.614] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 6138.614] compiled for 1.18.4, module version = 0.0.2
[ 6138.614] ABI class: X.Org Video Driver, version 20.0
[ 6138.614] (WW) Falling back to old probe method for vesa
[ 6138.615] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 6138.615] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 6138.615] (==) modeset(0): RGB weight 888
[ 6138.615] (==) modeset(0): Default visual is TrueColor
[ 6138.615] (II) Loading sub module "glamoregl"
[ 6138.615] (II) LoadModule: "glamoregl"
[ 6138.615] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 6138.625] (II) Module glamoregl: vendor="X.Org Foundation"
[ 6138.625] compiled for 1.18.4, module version = 1.0.0
[ 6138.625] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6138.625] (II) glamor: OpenGL accelerated X.org driver based.
[ 6138.642] (II) glamor: EGL version 1.4 (DRI2):
[ 6138.643] (II) modeset(0): glamor initialized
[ 6138.644] (II) modeset(0): Output eDP-1 has no monitor section
[ 6138.772] (II) modeset(0): Output HDMI-1 has no monitor section
[ 6138.772] (II) modeset(0): EDID for output eDP-1
[ 6138.772] (II) modeset(0): Manufacturer: LGD Model: 4b9 Serial#: 0
[ 6138.772] (II) modeset(0): Year: 2015 Week: 0
[ 6138.772] (II) modeset(0): EDID Version: 1.4
[ 6138.772] (II) modeset(0): Digital Display Input
[ 6138.772] (II) modeset(0): 6 bits per channel
[ 6138.772] (II) modeset(0): Digital interface is DisplayPort
[ 6138.772] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 6138.772] (II) modeset(0): Gamma: 2.20
[ 6138.772] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 6138.773] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 6138.773] (II) modeset(0): First detailed timing is preferred mode
[ 6138.773] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 6138.773] (II) modeset(0): redX: 0.580 redY: 0.350 greenX: 0.340 greenY: 0.560
[ 6138.773] (II) modeset(0): blueX: 0.155 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
[ 6138.773] (II) modeset(0): Manufacturer's mask: 0
[ 6138.773] (II) modeset(0): Supported detailed timing:
[ 6138.773] (II) modeset(0): clock: 138.7 MHz Image Size: 344 x 194 mm
[ 6138.773] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 6138.773] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 6138.773] (II) modeset(0): Supported detailed timing:
[ 6138.773] (II) modeset(0): clock: 111.0 MHz Image Size: 344 x 194 mm
[ 6138.773] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 6138.773] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 6138.773] (II) modeset(0): KFKV0�156WF6
[ 6138.773] (II) modeset(0): Unknown vendor-specific block 0
[ 6138.773] (II) modeset(0): EDID (in hex):
[ 6138.773] (II) modeset(0): 00ffffffffffff0030e4b90400000000
[ 6138.773] (II) modeset(0): 0019010495221378eaa1c59459578f27
[ 6138.773] (II) modeset(0): 20505400000001010101010101010101
[ 6138.773] (II) modeset(0): 0101010101012e3680a070381f403020
[ 6138.773] (II) modeset(0): 350058c21000001a5c2b80a070381f40
[ 6138.773] (II) modeset(0): 3020350058c21000001a000000fe004b
[ 6138.773] (II) modeset(0): 464b5630803135365746360a00000000
[ 6138.773] (II) modeset(0): 0000413196001000000a010a20200026
[ 6138.773] (II) modeset(0): Printing probed modes for output eDP-1
[ 6138.773] (II) modeset(0): Modeline "1920x1080"x60.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[ 6138.773] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1920x1080"x48.0 111.00 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
[ 6138.773] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 6138.773] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 6138.773] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 6138.773] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 6138.773] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 6138.773] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 6138.773] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 6138.773] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 6138.774] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 6138.774] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 6138.774] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 6138.774] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 6138.774] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 6138.774] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 6138.774] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 6138.774] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 6138.774] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 6138.774] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 6138.774] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 6138.774] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 6138.774] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 6138.774] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 6138.774] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 6138.774] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 6138.774] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 6138.900] (II) modeset(0): EDID for output HDMI-1
[ 6138.900] (II) modeset(0): Output eDP-1 connected
[ 6138.900] (II) modeset(0): Output HDMI-1 disconnected
[ 6138.900] (II) modeset(0): Using exact sizes for initial modes
[ 6138.900] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 6138.900] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6138.900] (==) modeset(0): DPI set to (96, 96)
[ 6138.900] (II) Loading sub module "fb"
[ 6138.900] (II) LoadModule: "fb"
[ 6138.900] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6138.901] (II) Module fb: vendor="X.Org Foundation"
[ 6138.901] compiled for 1.18.4, module version = 1.0.0
[ 6138.901] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6138.901] (II) UnloadModule: "fbdev"
[ 6138.901] (II) Unloading fbdev
[ 6138.901] (II) UnloadSubModule: "fbdevhw"
[ 6138.901] (II) Unloading fbdevhw
[ 6138.901] (II) UnloadModule: "vesa"
[ 6138.901] (II) Unloading vesa
[ 6138.901] (==) Depth 24 pixmap format is 32 bpp
[ 6138.994] (==) modeset(0): Backing store enabled
[ 6138.994] (==) modeset(0): Silken mouse enabled
[ 6138.994] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6138.994] (==) modeset(0): DPMS enabled
[ 6138.994] (II) modeset(0): [DRI2] Setup complete
[ 6138.994] (II) modeset(0): [DRI2] DRI driver: i965
[ 6138.994] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 6139.012] (--) RandR disabled
[ 6139.016] (II) SELinux: Disabled on system
[ 6139.022] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 6139.022] (II) AIGLX: enabled GLX_ARB_create_context
[ 6139.022] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 6139.022] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 6139.022] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 6139.022] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 6139.022] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 6139.022] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 6139.022] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 6139.022] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 6139.022] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 6139.022] (II) AIGLX: Loaded and initialized i965
[ 6139.022] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 6139.023] (II) modeset(0): Damage tracking initialized
[ 6139.023] (II) modeset(0): Setting screen physical size to 508 x 285
[ 6139.059] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[ 6139.059] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6139.059] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6139.059] (II) LoadModule: "libinput"
[ 6139.060] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 6139.061] (II) Module libinput: vendor="X.Org Foundation"
[ 6139.061] compiled for 1.18.3, module version = 0.19.0
[ 6139.061] Module class: X.Org XInput Driver
[ 6139.061] ABI class: X.Org XInput driver, version 22.1
[ 6139.061] (II) Using input driver 'libinput' for 'Power Button'
[ 6139.061] (**) Power Button: always reports core events
[ 6139.061] (**) Option "Device" "/dev/input/event8"
[ 6139.061] (**) Option "_source" "server/udev"
[ 6139.061] (II) input device 'Power Button', /dev/input/event8 is tagged by udev as: Keyboard
[ 6139.061] (II) input device 'Power Button', /dev/input/event8 is a keyboard
[ 6139.080] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event8"
[ 6139.080] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 6139.080] (**) Option "xkb_model" "pc105"
[ 6139.080] (**) Option "xkb_layout" "us"
[ 6139.080] (**) Option "xkb_variant" "colemak"
[ 6139.080] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6139.105] (II) input device 'Power Button', /dev/input/event8 is tagged by udev as: Keyboard
[ 6139.105] (II) input device 'Power Button', /dev/input/event8 is a keyboard
[ 6139.105] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 6139.105] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 6139.105] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 6139.105] (II) Using input driver 'libinput' for 'Video Bus'
[ 6139.105] (**) Video Bus: always reports core events
[ 6139.105] (**) Option "Device" "/dev/input/event11"
[ 6139.105] (**) Option "_source" "server/udev"
[ 6139.105] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 6139.105] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 6139.120] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event11"
[ 6139.120] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 6139.120] (**) Option "xkb_model" "pc105"
[ 6139.120] (**) Option "xkb_layout" "us"
[ 6139.120] (**) Option "xkb_variant" "colemak"
[ 6139.120] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6139.120] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 6139.120] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 6139.120] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 6139.120] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6139.120] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 6139.120] (II) Using input driver 'libinput' for 'Power Button'
[ 6139.120] (**) Power Button: always reports core events
[ 6139.120] (**) Option "Device" "/dev/input/event6"
[ 6139.120] (**) Option "_source" "server/udev"
[ 6139.121] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 6139.121] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[ 6139.132] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event6"
[ 6139.132] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 6139.132] (**) Option "xkb_model" "pc105"
[ 6139.132] (**) Option "xkb_layout" "us"
[ 6139.132] (**) Option "xkb_variant" "colemak"
[ 6139.132] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6139.132] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard
[ 6139.132] (II) input device 'Power Button', /dev/input/event6 is a keyboard
[ 6139.132] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 6139.132] (II) No input driver specified, ignoring this device.
[ 6139.132] (II) This device may have been added with another device file.
[ 6139.133] (II) config/udev: Adding input device Sleep Button (/dev/input/event7)
[ 6139.133] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 6139.133] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 6139.133] (II) Using input driver 'libinput' for 'Sleep Button'
[ 6139.133] (**) Sleep Button: always reports core events
[ 6139.133] (**) Option "Device" "/dev/input/event7"
[ 6139.133] (**) Option "_source" "server/udev"
[ 6139.133] (II) input device 'Sleep Button', /dev/input/event7 is tagged by udev as: Keyboard
[ 6139.133] (II) input device 'Sleep Button', /dev/input/event7 is a keyboard
[ 6139.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event7"
[ 6139.144] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 6139.144] (**) Option "xkb_model" "pc105"
[ 6139.144] (**) Option "xkb_layout" "us"
[ 6139.144] (**) Option "xkb_variant" "colemak"
[ 6139.144] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6139.144] (II) input device 'Sleep Button', /dev/input/event7 is tagged by udev as: Keyboard
[ 6139.144] (II) input device 'Sleep Button', /dev/input/event7 is a keyboard
[ 6139.144] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 6139.144] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6139.144] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 6139.145] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[ 6139.145] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 6139.145] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 6139.145] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[ 6139.145] (**) USB Optical Mouse: always reports core events
[ 6139.145] (**) Option "Device" "/dev/input/event1"
[ 6139.145] (**) Option "_source" "server/udev"
[ 6139.201] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 6139.201] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 6139.224] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3/event1"
[ 6139.224] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 6139.225] (**) Option "AccelerationScheme" "none"
[ 6139.225] (**) USB Optical Mouse: (accel) selected scheme none/0
[ 6139.225] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 6139.225] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 6139.281] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 6139.281] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 6139.282] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 6139.282] (II) No input driver specified, ignoring this device.
[ 6139.282] (II) This device may have been added with another device file.
[ 6139.283] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event9)
[ 6139.284] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 6139.284] (**) Integrated_Webcam_HD: Applying InputClass "libinput keyboard catchall"
[ 6139.284] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD'
[ 6139.284] (**) Integrated_Webcam_HD: always reports core events
[ 6139.284] (**) Option "Device" "/dev/input/event9"
[ 6139.284] (**) Option "_source" "server/udev"
[ 6139.285] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is tagged by udev as: Keyboard
[ 6139.285] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is a keyboard
[ 6139.312] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14/event9"
[ 6139.312] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 6139.312] (**) Option "xkb_model" "pc105"
[ 6139.312] (**) Option "xkb_layout" "us"
[ 6139.312] (**) Option "xkb_variant" "colemak"
[ 6139.312] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6139.314] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is tagged by udev as: Keyboard
[ 6139.314] (II) input device 'Integrated_Webcam_HD', /dev/input/event9 is a keyboard
[ 6139.315] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Finger (/dev/input/event3)
[ 6139.316] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: Applying InputClass "evdev touchscreen catchall"
[ 6139.316] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: Applying InputClass "libinput touchscreen catchall"
[ 6139.316] (II) Using input driver 'libinput' for 'Wacom Co.,Ltd. Pen and multitouch sensor Finger'
[ 6139.316] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: always reports core events
[ 6139.316] (**) Option "Device" "/dev/input/event3"
[ 6139.316] (**) Option "_source" "server/udev"
[ 6139.373] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is tagged by udev as: Touchscreen
[ 6139.373] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is a touch device
[ 6139.396] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5/event3"
[ 6139.396] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Pen and multitouch sensor Finger" (type: TOUCHSCREEN, id 12)
[ 6139.396] (**) Option "AccelerationScheme" "none"
[ 6139.396] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: (accel) selected scheme none/0
[ 6139.396] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: (accel) acceleration factor: 2.000
[ 6139.396] (**) Wacom Co.,Ltd. Pen and multitouch sensor Finger: (accel) acceleration threshold: 4
[ 6139.453] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is tagged by udev as: Touchscreen
[ 6139.453] (II) input device 'Wacom Co.,Ltd. Pen and multitouch sensor Finger', /dev/input/event3 is a touch device
[ 6139.454] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Finger (/dev/input/mouse2)
[ 6139.454] (II) No input driver specified, ignoring this device.
[ 6139.454] (II) This device may have been added with another device file.
[ 6139.456] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Pen (/dev/input/event4)
[ 6139.456] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: Applying InputClass "evdev tablet catchall"
[ 6139.456] (II) LoadModule: "evdev"
[ 6139.456] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6139.457] (II) Module evdev: vendor="X.Org Foundation"
[ 6139.457] compiled for 1.18.3, module version = 2.10.2
[ 6139.457] Module class: X.Org XInput Driver
[ 6139.457] ABI class: X.Org XInput driver, version 22.1
[ 6139.457] (II) Using input driver 'evdev' for 'Wacom Co.,Ltd. Pen and multitouch sensor Pen'
[ 6139.457] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: always reports core events
[ 6139.457] (**) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Device: "/dev/input/event4"
[ 6139.512] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Vendor 0x56a Product 0x480d
[ 6139.512] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Found absolute axes
[ 6139.512] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Found x and y absolute axes
[ 6139.512] (--) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Found absolute tablet.
[ 6139.512] (II) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: Configuring as tablet
[ 6139.512] (**) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: YAxisMapping: buttons 4 and 5
[ 6139.512] (**) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6139.512] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7/event4"
[ 6139.512] (II) XINPUT: Adding extended input device "Wacom Co.,Ltd. Pen and multitouch sensor Pen" (type: TABLET, id 13)
[ 6139.512] (II) evdev: Wacom Co.,Ltd. Pen and multitouch sensor Pen: initialized for absolute axes.
[ 6139.513] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) keeping acceleration scheme 1
[ 6139.513] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) acceleration profile 0
[ 6139.513] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) acceleration factor: 2.000
[ 6139.513] (**) Wacom Co.,Ltd. Pen and multitouch sensor Pen: (accel) acceleration threshold: 4
[ 6139.515] (II) config/udev: Adding input device Wacom Co.,Ltd. Pen and multitouch sensor Pen (/dev/input/mouse3)
[ 6139.515] (II) No input driver specified, ignoring this device.
[ 6139.515] (II) This device may have been added with another device file.
[ 6139.517] (II) config/udev: Adding input device Bluetooth Keyboard (/dev/input/event2)
[ 6139.517] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 6139.517] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 6139.517] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 6139.517] (**) Bluetooth Keyboard : always reports core events
[ 6139.517] (**) Option "Device" "/dev/input/event2"
[ 6139.517] (**) Option "_source" "server/udev"
[ 6139.518] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 6139.518] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 6139.544] (II) libinput: Bluetooth Keyboard : needs a virtual subdevice
[ 6139.544] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000A/input/input37/event2"
[ 6139.544] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: MOUSE, id 14)
[ 6139.544] (**) Option "AccelerationScheme" "none"
[ 6139.544] (**) Bluetooth Keyboard : (accel) selected scheme none/0
[ 6139.544] (**) Bluetooth Keyboard : (accel) acceleration factor: 2.000
[ 6139.544] (**) Bluetooth Keyboard : (accel) acceleration threshold: 4
[ 6139.546] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 6139.546] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 6139.547] (II) config/udev: Adding input device DLL06FF:00 06CB:75C1 Touchpad (/dev/input/event12)
[ 6139.548] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "evdev touchpad catchall"
[ 6139.548] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 6139.548] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 6139.548] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "libinput touchscreen catchall"
[ 6139.548] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "touchpad catchall"
[ 6139.548] (**) DLL06FF:00 06CB:75C1 Touchpad: Applying InputClass "Default clickpad buttons"
[ 6139.548] (II) LoadModule: "synaptics"
[ 6139.548] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 6139.549] (II) Module synaptics: vendor="X.Org Foundation"
[ 6139.549] compiled for 1.18.3, module version = 1.8.3
[ 6139.549] Module class: X.Org XInput Driver
[ 6139.549] ABI class: X.Org XInput driver, version 22.1
[ 6139.549] (II) Using input driver 'synaptics' for 'DLL06FF:00 06CB:75C1 Touchpad'
[ 6139.549] (**) DLL06FF:00 06CB:75C1 Touchpad: always reports core events
[ 6139.549] (**) Option "Device" "/dev/input/event12"
[ 6139.600] (II) synaptics: DLL06FF:00 06CB:75C1 Touchpad: found clickpad property
[ 6139.601] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: x-axis range 0 - 1229 (res 12)
[ 6139.601] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: y-axis range 0 - 929 (res 12)
[ 6139.601] (II) synaptics: DLL06FF:00 06CB:75C1 Touchpad: device does not report pressure, will use touch data.
[ 6139.601] (II) synaptics: DLL06FF:00 06CB:75C1 Touchpad: device does not report finger width.
[ 6139.601] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: buttons: left double triple
[ 6139.601] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: Vendor 0x6cb Product 0x75c1
[ 6139.601] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: invalid pressure range. defaulting to 0 - 255
[ 6139.601] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: invalid finger width range. defaulting to 0 - 15
[ 6139.601] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 6139.601] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: touchpad found
[ 6139.601] (**) DLL06FF:00 06CB:75C1 Touchpad: always reports core events
[ 6139.628] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17/event12"
[ 6139.628] (II) XINPUT: Adding extended input device "DLL06FF:00 06CB:75C1 Touchpad" (type: TOUCHPAD, id 15)
[ 6139.628] (**) synaptics: DLL06FF:00 06CB:75C1 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 6139.628] (**) synaptics: DLL06FF:00 06CB:75C1 Touchpad: (accel) MaxSpeed is now 1.75
[ 6139.628] (**) synaptics: DLL06FF:00 06CB:75C1 Touchpad: (accel) AccelFactor is now 0.130
[ 6139.628] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) keeping acceleration scheme 1
[ 6139.628] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) acceleration profile 1
[ 6139.628] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) acceleration factor: 2.000
[ 6139.628] (**) DLL06FF:00 06CB:75C1 Touchpad: (accel) acceleration threshold: 4
[ 6139.629] (--) synaptics: DLL06FF:00 06CB:75C1 Touchpad: touchpad found
[ 6139.630] (II) config/udev: Adding input device DLL06FF:00 06CB:75C1 Touchpad (/dev/input/mouse4)
[ 6139.630] (**) DLL06FF:00 06CB:75C1 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 6139.631] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 6139.631] (II) No input driver specified, ignoring this device.
[ 6139.631] (II) This device may have been added with another device file.
[ 6139.632] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 6139.632] (II) No input driver specified, ignoring this device.
[ 6139.632] (II) This device may have been added with another device file.
[ 6139.632] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 6139.632] (II) No input driver specified, ignoring this device.
[ 6139.632] (II) This device may have been added with another device file.
[ 6139.633] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 6139.633] (II) No input driver specified, ignoring this device.
[ 6139.633] (II) This device may have been added with another device file.
[ 6139.634] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[ 6139.634] (II) No input driver specified, ignoring this device.
[ 6139.634] (II) This device may have been added with another device file.
[ 6139.634] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[ 6139.634] (II) No input driver specified, ignoring this device.
[ 6139.634] (II) This device may have been added with another device file.
[ 6139.635] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 6139.636] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 6139.636] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 6139.636] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 6139.636] (**) AT Translated Set 2 keyboard: always reports core events
[ 6139.636] (**) Option "Device" "/dev/input/event0"
[ 6139.636] (**) Option "_source" "server/udev"
[ 6139.637] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 6139.637] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 6139.664] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 6139.664] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 6139.664] (**) Option "xkb_model" "pc105"
[ 6139.664] (**) Option "xkb_layout" "us"
[ 6139.664] (**) Option "xkb_variant" "colemak"
[ 6139.664] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6139.665] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 6139.665] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 6139.666] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 6139.666] (II) No input driver specified, ignoring this device.
[ 6139.666] (II) This device may have been added with another device file.
[ 6139.673] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 6139.673] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 6139.673] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 6139.673] (**) Bluetooth Keyboard : always reports core events
[ 6139.673] (**) Option "Device" "/dev/input/event2"
[ 6139.673] (**) Option "_source" "_driver/libinput"
[ 6139.673] (II) libinput: Bluetooth Keyboard : is a virtual subdevice
[ 6139.673] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000A/input/input37/event2"
[ 6139.673] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: KEYBOARD, id 17)
[ 6139.673] (**) Option "xkb_model" "pc105"
[ 6139.673] (**) Option "xkb_layout" "us"
[ 6139.673] (**) Option "xkb_variant" "colemak"
[ 6139.673] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
[ 6144.731] (II) config/udev: removing device Bluetooth Keyboard
[ 6144.732] (II) UnloadModule: "libinput"
[ 6144.732] (II) config/udev: removing device Bluetooth Keyboard
[ 6144.748] (II) UnloadModule: "libinput"
[ 6153.239] (II) config/udev: Adding input device Bluetooth Keyboard (/dev/input/event2)
[ 6153.239] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 6153.239] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 6153.239] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 6153.239] (**) Bluetooth Keyboard : always reports core events
[ 6153.239] (**) Option "Device" "/dev/input/event2"
[ 6153.239] (**) Option "_source" "server/udev"
[ 6153.240] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 6153.240] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 6153.280] (II) libinput: Bluetooth Keyboard : needs a virtual subdevice
[ 6153.280] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000B/input/input38/event2"
[ 6153.280] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: MOUSE, id 14)
[ 6153.280] (**) Option "AccelerationScheme" "none"
[ 6153.280] (**) Bluetooth Keyboard : (accel) selected scheme none/0
[ 6153.280] (**) Bluetooth Keyboard : (accel) acceleration factor: 2.000
[ 6153.280] (**) Bluetooth Keyboard : (accel) acceleration threshold: 4
[ 6153.280] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is tagged by udev as: Keyboard
[ 6153.280] (II) input device 'Bluetooth Keyboard ', /dev/input/event2 is a keyboard
[ 6153.280] (**) Bluetooth Keyboard : Applying InputClass "evdev keyboard catchall"
[ 6153.280] (**) Bluetooth Keyboard : Applying InputClass "libinput keyboard catchall"
[ 6153.280] (II) Using input driver 'libinput' for 'Bluetooth Keyboard '
[ 6153.280] (**) Bluetooth Keyboard : always reports core events
[ 6153.280] (**) Option "Device" "/dev/input/event2"
[ 6153.280] (**) Option "_source" "_driver/libinput"
[ 6153.280] (II) libinput: Bluetooth Keyboard : is a virtual subdevice
[ 6153.280] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000B/input/input38/event2"
[ 6153.280] (II) XINPUT: Adding extended input device "Bluetooth Keyboard " (type: KEYBOARD, id 17)
[ 6153.280] (**) Option "xkb_model" "pc105"
[ 6153.281] (**) Option "xkb_layout" "us"
[ 6153.281] (**) Option "xkb_variant" "colemak"
[ 6153.281] (**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=8737615
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event8
N: input/event8
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event8
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=8866496
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:rwin
E: XKBVARIANT=colemak
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=8828440
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event11
N: input/event11
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event11
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=8882837
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:rwin
E: XKBVARIANT=colemak
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=8735570
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:PNP0C0C/button
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=8855769
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:rwin
E: XKBVARIANT=colemak
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=8737938
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10/event5
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=8855694
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=8740934
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=8862532
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:rwin
E: XKBVARIANT=colemak
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=0939
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=0200
E: ID_SERIAL=04f2_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=04f2
E: ID_VENDOR_ENC=04f2
E: ID_VENDOR_ID=04f2
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v04F2p0939e0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="USB Optical Mouse"
E: PHYS="usb-0000:00:14.0-3/input0"
E: PRODUCT=3/4f2/939/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=1703616
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3/event1
N: input/event1
S: input/by-id/usb-04f2_USB_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event-mouse /dev/input/by-id/usb-04f2_USB_Optical_Mouse-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=0939
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=0200
E: ID_SERIAL=04f2_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=04f2
E: ID_VENDOR_ENC=04f2
E: ID_VENDOR_ID=04f2
E: LIBINPUT_DEVICE_GROUP=3/4f2/939/111:usb-0000:00:14.0-3
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8995322
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3/mouse0
N: input/mouse0
S: input/by-id/usb-04f2_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-mouse /dev/input/by-id/usb-04f2_USB_Optical_Mouse-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04F2:0939.0001/input/input3/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=0939
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=0200
E: ID_SERIAL=04f2_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=04f2
E: ID_VENDOR_ENC=04f2
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1705262
P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_5_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=28aa
E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0
E: ID_REVISION=4307
E: ID_SERIAL=CN0GNXH5724875AABB3AA02_Integrated_Webcam_HD
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN0GNXH5724875AABB3AA02
E: ID_VENDOR_ENC=CN0GNXH5724875AABB3AA02
E: ID_VENDOR_ID=1bcf
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v1BCFp28AAe4307-e0,1,kD4,ramlsfw
E: NAME="Integrated_Webcam_HD"
E: PHYS="usb-0000:00:14.0-5/button"
E: PRODUCT=3/1bcf/28aa/4307
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=8823885
P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14/event9
N: input/event9
S: input/by-id/usb-CN0GNXH5724875AABB3AA02_Integrated_Webcam_HD-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event /dev/input/by-id/usb-CN0GNXH5724875AABB3AA02_Integrated_Webcam_HD-event-if00
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14/event9
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=28aa
E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0
E: ID_REVISION=4307
E: ID_SERIAL=CN0GNXH5724875AABB3AA02_Integrated_Webcam_HD
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN0GNXH5724875AABB3AA02
E: ID_VENDOR_ENC=CN0GNXH5724875AABB3AA02
E: ID_VENDOR_ID=1bcf
E: LIBINPUT_DEVICE_GROUP=3/1bcf/28aa/4307:usb-0000:00:14.0-5/button
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8883016
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:rwin
E: XKBVARIANT=colemak
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5
E: ABS=260800000000003
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5
E: EV=b
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_7_1_0
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=480d
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=0009
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: KEY=400 0 0 0 0 0
E: MODALIAS=input:b0003v056Ap480De0111-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
E: NAME="Wacom Co.,Ltd. Pen and multitouch sensor Finger"
E: PHYS="usb-0000:00:14.0-7/input0"
E: PRODUCT=3/56a/480d/111
E: PROP=2
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2910700
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5/event3
N: input/event3
S: input/by-id/usb-Wacom_Co._Ltd._Pen_and_multitouch_sensor-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: DEVLINKS=/dev/input/by-id/usb-Wacom_Co._Ltd._Pen_and_multitouch_sensor-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=193
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=344
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=480d
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=0009
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: LIBINPUT_DEVICE_GROUP=3/56a/480d/111:usb-0000:00:14.0-7
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9003069
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5/mouse2
N: input/mouse2
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:056A:480D.0003/input/input5/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=480d
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=0009
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2912473
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7
E: ABS=1000003
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7
E: EV=1b
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_7_1_1
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=480d
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_1
E: ID_REVISION=0009
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: KEY=1c03 0 0 0 0 0
E: MODALIAS=input:b0003v056Ap480De0111-e0,1,3,4,k140,141,14A,14B,14C,ra0,1,18,m0,lsfw
E: MSC=1
E: NAME="Wacom Co.,Ltd. Pen and multitouch sensor Pen"
E: PHYS="usb-0000:00:14.0-7/input1"
E: PRODUCT=3/56a/480d/111
E: PROP=2
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2912451
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7/event4
N: input/event4
S: input/by-id/usb-Wacom_Co._Ltd._Pen_and_multitouch_sensor-if01-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:7:1.1-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:7:1.1-event-mouse /dev/input/by-id/usb-Wacom_Co._Ltd._Pen_and_multitouch_sensor-if01-event-mouse
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7/event4
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=193
E: ID_INPUT_TABLET=1
E: ID_INPUT_WIDTH_MM=344
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=480d
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_1
E: ID_REVISION=0009
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: LIBINPUT_DEVICE_GROUP=3/56a/480d/111:usb-0000:00:14.0-7
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9007025
P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7/mouse3
N: input/mouse3
S: input/by-id/usb-Wacom_Co._Ltd._Pen_and_multitouch_sensor-if01-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:7:1.1-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:7:1.1-mouse /dev/input/by-id/usb-Wacom_Co._Ltd._Pen_and_multitouch_sensor-if01-mouse
E: DEVNAME=/dev/input/mouse3
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:056A:480D.0004/input/input7/mouse3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=480d
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_1
E: ID_REVISION=0009
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: MAJOR=13
E: MINOR=35
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2914280
P: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000B/input/input38
E: ABS=100030000
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000B/input/input38
E: EV=12001f
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_8_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0
E: KEY=3f0003007f 0 0 4c3ffff17aff32d bf54445600000000 1 130f938b17c007 ffff7bfad951dfff febeffdfffefffff fffffffffffffffe
E: LED=1f
E: MODALIAS=input:b0005v04F2p1063e0400-e0,1,2,3,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,8F,90,94,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E7,E8,E9,EA,EB,F0,F1,F4,100,161,162,164,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B6,1B7,1BA,240,241,242,243,244,245,246,250,251,260,261,262,263,264,265,r6,a10,11,20,m4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Bluetooth Keyboard "
E: PHYS="e0:94:67:6b:99:bd"
E: PRODUCT=5/4f2/1063/400
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ="90:7f:61:10:63:23"
E: USEC_INITIALIZED=6153169985
P: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000B/input/input38/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/bluetooth/hci0/hci0:256/0005:04F2:1063.000B/input/input38/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: LIBINPUT_DEVICE_GROUP=5/4f2/1063/400:e0:94:67:6b:99:bd
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6153237583
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:rwin
E: XKBVARIANT=colemak
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17
E: ABS=260800000000003
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17
E: EV=b
E: ID_FOR_SEAT=input-pci-0000_00_15_0-platform-i2c_designware_0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: ID_SERIAL=noserial
E: KEY=6420 10000 0 0 0 0
E: MODALIAS=input:b0018v06CBp75C1e0100-e0,1,3,k110,145,14A,14D,14E,ra0,1,2F,35,36,39,mlsfw
E: NAME="DLL06FF:00 06CB:75C1 Touchpad"
E: PHYS="i2c-DLL06FF:00"
E: PRODUCT=18/6cb/75c1/100
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=8957320
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17/event12
N: input/event12
S: input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-event-mouse
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17/event12
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=77
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=102
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=18/6cb/75c1/100:i2c-DLL06FF:00
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9011435
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17/mouse4
N: input/mouse4
S: input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-mouse
E: DEVNAME=/dev/input/mouse4
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-4/i2c-DLL06FF:00/0018:06CB:75C1.0005/input/input17/mouse4
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=36
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8960787
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input19
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0001v14F1p50F2e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/14f1/50f2/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=10010265
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input19/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input19/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=1/14f1/50f2/1:card0/codec#0/beep0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10061090
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input20
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=10000675
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input20/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input20/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10054307
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=10002565
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input21/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input21/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10050882
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input22
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=10002466
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input22/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input22/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10059090
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input23
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=10004123
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input23/event17
N: input/event17
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input23/event17
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10059437
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input24
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1f_3
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=10005814
P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input24/event18
N: input/event18
E: DEVNAME=/dev/input/event18
E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input24/event18
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1f.3
E: ID_PATH_TAG=pci-0000_00_1f_3
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=82
E: SUBSYSTEM=input
E: USEC_INITIALIZED=10060211
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1143522
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_81=playpause
E: KEYBOARD_KEY_82=stopcd
E: KEYBOARD_KEY_83=previoussong
E: KEYBOARD_KEY_84=nextsong
E: KEYBOARD_KEY_85=brightnessdown
E: KEYBOARD_KEY_86=brightnessup
E: KEYBOARD_KEY_87=battery
E: KEYBOARD_KEY_88=unknown
E: KEYBOARD_KEY_89=ejectclosecd
E: KEYBOARD_KEY_8F=switchvideomode
E: KEYBOARD_KEY_8a=suspend
E: KEYBOARD_KEY_8b=switchvideomode
E: KEYBOARD_KEY_8c=unknown
E: KEYBOARD_KEY_90=previoussong
E: KEYBOARD_KEY_91=prog1
E: KEYBOARD_KEY_92=media
E: KEYBOARD_KEY_93=unknown
E: KEYBOARD_KEY_95=camera
E: KEYBOARD_KEY_97=email
E: KEYBOARD_KEY_98=f21
E: KEYBOARD_KEY_99=nextsong
E: KEYBOARD_KEY_9a=setup
E: KEYBOARD_KEY_9b=switchvideomode
E: KEYBOARD_KEY_9e=f21
E: KEYBOARD_KEY_a2=playpause
E: KEYBOARD_KEY_a4=stopcd
E: KEYBOARD_KEY_d8=screenlock
E: KEYBOARD_KEY_d9=f21
E: KEYBOARD_KEY_ed=media
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab41:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8866453
E: XKBLAYOUT=us
E: XKBMODEL=pc105
E: XKBOPTIONS=lv3:ralt_switch,compose:rwin
E: XKBVARIANT=colemak
P: /devices/platform/pcspkr/input/input15
E: DEVPATH=/devices/platform/pcspkr/input/input15
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=8825809
P: /devices/platform/pcspkr/input/input15/event10
N: input/event10
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/platform/pcspkr/input/input15/event10
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8866744
DRM Information from dmesg:
---------------------------
[ 0.887842] Linux agpgart interface v0.103
[ 8.383828] [drm] Initialized drm 1.1.0 20060810
[ 8.466287] [drm] Memory usable by graphics device = 4096M
[ 8.466292] [drm] Replacing VGA console driver
[ 8.477893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.477897] [drm] Driver supports precise vblank timestamp query.
[ 8.479630] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.23)
[ 8.622393] fbcon: inteldrmfb (fb0) is primary device
[ 8.626841] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[ 9.813467] [drm] RC6 on
[ 9.947207] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1181.673148] [drm] RC6 on
[ 1314.651187] [drm] RC6 on
[ 1401.673743] [drm] RC6 on
[ 1848.621155] [drm] RC6 on
-- System Information:
Distributor ID: BunsenLabs
Description: BunsenLabs GNU/Linux 8.5 (Hydrogen) <- upgraded to Stretch
Release: 8.5
Codename: bunsen-hydrogen
Architecture: x86_64
Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-input-libinput depends on:
ii libc6 2.23-2
ii libinput10 1.3.3-1
ii xserver-xorg-core [xorg-input-abi-22] 2:1.18.4-1
xserver-xorg-input-libinput recommends no packages.
xserver-xorg-input-libinput suggests no packages.
-- no debconf information
Reply to: