Bug#823843: cinnamon-common: Touchpad setting "tap to click" stopped working
Package: xserver-xorg-input-synaptics
Version: 1.8.3-2
Followup-For: Bug #823843
Dear Maintainer,
tap-to-click also refuses working in my installation. Also scrolling by using
the touchpad goes the other direction.
I'm using Gnome3, so it seems it's not depending on Cinnamon.
The scrolling direction I could change, but I didn't find a setting to
reactivate tap-to-click and this makes my laptop nearly unusable as I first
click several times until I realize I have to use the buttons now.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Apr 17 2015 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Apr 5 09:05 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160528 (Debian 5.3.1-21) ) #1 SMP Debian 4.5.5-1 (2016-05-29)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 22824 Sep 1 2015 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 22565 Sep 1 2015 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 23569 Oct 28 2015 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 47.357]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 47.357] X Protocol Version 11, Revision 0
[ 47.357] Build Operating System: Linux 4.1.0 x86_64 Debian
[ 47.357] Current Operating System: Linux schlepptop 4.2.0-1-amd64 #1 SMP Debian 4.2.1-2 (2015-09-27) x86_64
[ 47.357] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-1-amd64 root=/dev/mapper/schlepptop--vg-root ro quiet
[ 47.357] Build Date: 11 August 2015 10:51:15AM
[ 47.357] xorg-server 2:1.17.2-1.1 (http://www.debian.org/support)
[ 47.357] Current version of pixman: 0.33.2
[ 47.357] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 47.357] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 47.358] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 28 11:15:57 2015
[ 48.137] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 48.140] (==) No Layout section. Using the first Screen section.
[ 48.140] (==) No screen section available. Using defaults.
[ 48.140] (**) |-->Screen "Default Screen Section" (0)
[ 48.140] (**) | |-->Monitor "<default monitor>"
[ 48.141] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 48.141] (==) Automatically adding devices
[ 48.141] (==) Automatically enabling devices
[ 48.141] (==) Automatically adding GPU devices
[ 48.323] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 48.323] Entry deleted from font path.
[ 48.397] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 48.397] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 48.397] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 48.615] (II) Loader magic: 0x562aa9ef4d40
[ 48.615] (II) Module ABI versions:
[ 48.615] X.Org ANSI C Emulation: 0.4
[ 48.615] X.Org Video Driver: 19.0
[ 48.615] X.Org XInput driver : 21.0
[ 48.615] X.Org Server Extension : 9.0
[ 48.616] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 48.618] (--) PCI:*(0:0:2:0) 8086:0166:1558:1310 rev 9, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 48.672] (II) LoadModule: "glx"
[ 48.897] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 49.000] (II) Module glx: vendor="X.Org Foundation"
[ 49.000] compiled for 1.17.2, module version = 1.0.0
[ 49.000] ABI class: X.Org Server Extension, version 9.0
[ 49.000] (==) AIGLX enabled
[ 49.000] (==) Matched intel as autoconfigured driver 0
[ 49.000] (==) Matched intel as autoconfigured driver 1
[ 49.000] (==) Matched modesetting as autoconfigured driver 2
[ 49.000] (==) Matched fbdev as autoconfigured driver 3
[ 49.000] (==) Matched vesa as autoconfigured driver 4
[ 49.000] (==) Assigned the driver to the xf86ConfigLayout
[ 49.000] (II) LoadModule: "intel"
[ 49.001] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 49.007] (II) Module intel: vendor="X.Org Foundation"
[ 49.007] compiled for 1.17.2, module version = 2.99.917
[ 49.007] Module class: X.Org Video Driver
[ 49.007] ABI class: X.Org Video Driver, version 19.0
[ 49.007] (II) LoadModule: "modesetting"
[ 49.007] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 49.009] (II) Module modesetting: vendor="X.Org Foundation"
[ 49.009] compiled for 1.17.2, module version = 1.17.2
[ 49.009] Module class: X.Org Video Driver
[ 49.009] ABI class: X.Org Video Driver, version 19.0
[ 49.009] (II) LoadModule: "fbdev"
[ 49.009] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 49.011] (II) Module fbdev: vendor="X.Org Foundation"
[ 49.011] compiled for 1.17.1, module version = 0.4.4
[ 49.011] Module class: X.Org Video Driver
[ 49.011] ABI class: X.Org Video Driver, version 19.0
[ 49.011] (II) LoadModule: "vesa"
[ 49.011] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 49.012] (II) Module vesa: vendor="X.Org Foundation"
[ 49.012] compiled for 1.17.1, module version = 2.3.3
[ 49.012] Module class: X.Org Video Driver
[ 49.012] ABI class: X.Org Video Driver, version 19.0
[ 49.012] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 49.013] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 49.013] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 49.013] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 49.013] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 49.013] (II) FBDEV: driver for framebuffer: fbdev
[ 49.013] (II) VESA: driver for VESA chipsets: vesa
[ 49.013] (++) using VT number 7
[ 49.024] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522
[ 49.024] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2 (Vincent Cheng <vcheng@debian.org>)
[ 49.025] (II) intel(0): SNA compiled for use with valgrind
[ 49.026] (WW) Falling back to old probe method for modesetting
[ 49.026] (WW) Falling back to old probe method for fbdev
[ 49.026] (II) Loading sub module "fbdevhw"
[ 49.026] (II) LoadModule: "fbdevhw"
[ 49.026] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 49.027] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 49.027] compiled for 1.17.2, module version = 0.0.2
[ 49.027] ABI class: X.Org Video Driver, version 19.0
[ 49.027] (WW) Falling back to old probe method for vesa
[ 49.029] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 49.029] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 49.029] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 49.029] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 49.029] (==) intel(0): RGB weight 888
[ 49.029] (==) intel(0): Default visual is TrueColor
[ 49.029] (II) intel(0): Output LVDS1 has no monitor section
[ 49.048] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 49.048] (II) intel(0): Enabled output LVDS1
[ 49.048] (II) intel(0): Output VGA1 has no monitor section
[ 49.048] (II) intel(0): Enabled output VGA1
[ 49.048] (II) intel(0): Output HDMI1 has no monitor section
[ 49.048] (II) intel(0): Enabled output HDMI1
[ 49.048] (II) intel(0): Output DP1 has no monitor section
[ 49.048] (II) intel(0): Enabled output DP1
[ 49.048] (II) intel(0): Output HDMI2 has no monitor section
[ 49.048] (II) intel(0): Enabled output HDMI2
[ 49.048] (II) intel(0): Output HDMI3 has no monitor section
[ 49.048] (II) intel(0): Enabled output HDMI3
[ 49.048] (II) intel(0): Output DP2 has no monitor section
[ 49.048] (II) intel(0): Enabled output DP2
[ 49.048] (II) intel(0): Output DP3 has no monitor section
[ 49.048] (II) intel(0): Enabled output DP3
[ 49.048] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 49.048] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 49.048] (II) intel(0): Enabled output VIRTUAL1
[ 49.049] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[ 49.049] (==) intel(0): TearFree disabled
[ 49.049] (==) intel(0): DPI set to (96, 96)
[ 49.049] (II) Loading sub module "dri2"
[ 49.049] (II) LoadModule: "dri2"
[ 49.049] (II) Module "dri2" already built-in
[ 49.049] (II) Loading sub module "present"
[ 49.049] (II) LoadModule: "present"
[ 49.049] (II) Module "present" already built-in
[ 49.049] (II) UnloadModule: "modesetting"
[ 49.049] (II) Unloading modesetting
[ 49.049] (II) UnloadModule: "fbdev"
[ 49.049] (II) Unloading fbdev
[ 49.049] (II) UnloadSubModule: "fbdevhw"
[ 49.049] (II) Unloading fbdevhw
[ 49.049] (II) UnloadModule: "vesa"
[ 49.049] (II) Unloading vesa
[ 49.049] (==) Depth 24 pixmap format is 32 bpp
[ 49.101] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 49.101] (==) intel(0): Backing store enabled
[ 49.101] (==) intel(0): Silken mouse enabled
[ 49.103] (II) intel(0): HW Cursor enabled
[ 49.103] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 49.104] (==) intel(0): DPMS enabled
[ 49.104] (==) intel(0): display hotplug detection enabled
[ 49.104] (II) intel(0): [DRI2] Setup complete
[ 49.104] (II) intel(0): [DRI2] DRI driver: i965
[ 49.104] (II) intel(0): [DRI2] VDPAU driver: i965
[ 49.104] (II) intel(0): direct rendering: DRI2 enabled
[ 49.104] (II) intel(0): hardware support for Present enabled
[ 49.104] (--) RandR disabled
[ 49.110] (II) SELinux: Disabled on system
[ 49.222] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 49.223] (II) AIGLX: enabled GLX_ARB_create_context
[ 49.223] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 49.223] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 49.223] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 49.223] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 49.223] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 49.223] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 49.223] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 49.223] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 49.223] (II) AIGLX: Loaded and initialized i965
[ 49.223] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 49.228] (II) intel(0): switch to mode 1920x1080@59.9 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 49.230] (II) intel(0): Setting screen physical size to 508 x 285
[ 49.353] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 49.353] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 49.353] (II) LoadModule: "evdev"
[ 49.354] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 49.504] (II) Module evdev: vendor="X.Org Foundation"
[ 49.504] compiled for 1.16.4, module version = 2.9.2
[ 49.504] Module class: X.Org XInput Driver
[ 49.504] ABI class: X.Org XInput driver, version 21.0
[ 49.504] (II) Using input driver 'evdev' for 'Power Button'
[ 49.504] (**) Power Button: always reports core events
[ 49.504] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 49.504] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 49.504] (--) evdev: Power Button: Found keys
[ 49.504] (II) evdev: Power Button: Configuring as keyboard
[ 49.504] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event5"
[ 49.504] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 49.504] (**) Option "xkb_rules" "evdev"
[ 49.504] (**) Option "xkb_model" "pc105"
[ 49.504] (**) Option "xkb_layout" "de"
[ 49.620] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 49.620] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 49.620] (II) Using input driver 'evdev' for 'Video Bus'
[ 49.620] (**) Video Bus: always reports core events
[ 49.620] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 49.620] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 49.620] (--) evdev: Video Bus: Found keys
[ 49.620] (II) evdev: Video Bus: Configuring as keyboard
[ 49.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event12"
[ 49.620] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 49.620] (**) Option "xkb_rules" "evdev"
[ 49.620] (**) Option "xkb_model" "pc105"
[ 49.620] (**) Option "xkb_layout" "de"
[ 49.621] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 49.621] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 49.621] (II) Using input driver 'evdev' for 'Power Button'
[ 49.621] (**) Power Button: always reports core events
[ 49.621] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 49.621] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 49.621] (--) evdev: Power Button: Found keys
[ 49.621] (II) evdev: Power Button: Configuring as keyboard
[ 49.621] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event2"
[ 49.621] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 49.621] (**) Option "xkb_rules" "evdev"
[ 49.622] (**) Option "xkb_model" "pc105"
[ 49.622] (**) Option "xkb_layout" "de"
[ 49.622] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 49.622] (II) No input driver specified, ignoring this device.
[ 49.622] (II) This device may have been added with another device file.
[ 49.623] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 49.623] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 49.623] (II) Using input driver 'evdev' for 'Sleep Button'
[ 49.623] (**) Sleep Button: always reports core events
[ 49.623] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 49.623] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 49.623] (--) evdev: Sleep Button: Found keys
[ 49.623] (II) evdev: Sleep Button: Configuring as keyboard
[ 49.623] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9/event3"
[ 49.623] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 49.623] (**) Option "xkb_rules" "evdev"
[ 49.623] (**) Option "xkb_model" "pc105"
[ 49.623] (**) Option "xkb_layout" "de"
[ 49.625] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event1)
[ 49.625] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 49.625] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[ 49.625] (**) Logitech Optical USB Mouse: always reports core events
[ 49.625] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event1"
[ 49.680] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
[ 49.680] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
[ 49.680] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
[ 49.680] (--) evdev: Logitech Optical USB Mouse: Found relative axes
[ 49.680] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
[ 49.680] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
[ 49.680] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
[ 49.680] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 49.680] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 49.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C016.0001/input/input7/event1"
[ 49.680] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 10)
[ 49.680] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
[ 49.680] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 49.680] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[ 49.680] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 49.680] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 49.681] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 49.681] (II) No input driver specified, ignoring this device.
[ 49.681] (II) This device may have been added with another device file.
[ 49.681] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event13)
[ 49.681] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 49.681] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 49.681] (**) BisonCam, NB Pro: always reports core events
[ 49.681] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event13"
[ 49.681] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x401
[ 49.682] (--) evdev: BisonCam, NB Pro: Found keys
[ 49.682] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 49.682] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21/event13"
[ 49.682] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 11)
[ 49.682] (**) Option "xkb_rules" "evdev"
[ 49.682] (**) Option "xkb_model" "pc105"
[ 49.682] (**) Option "xkb_layout" "de"
[ 49.682] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 49.682] (II) No input driver specified, ignoring this device.
[ 49.682] (II) This device may have been added with another device file.
[ 49.683] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 49.683] (II) No input driver specified, ignoring this device.
[ 49.683] (II) This device may have been added with another device file.
[ 49.683] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[ 49.683] (II) No input driver specified, ignoring this device.
[ 49.683] (II) This device may have been added with another device file.
[ 49.683] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 49.683] (II) No input driver specified, ignoring this device.
[ 49.683] (II) This device may have been added with another device file.
[ 49.684] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event10)
[ 49.684] (II) No input driver specified, ignoring this device.
[ 49.684] (II) This device may have been added with another device file.
[ 49.684] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 49.684] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 49.684] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 49.684] (**) AT Translated Set 2 keyboard: always reports core events
[ 49.684] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 49.684] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 49.684] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 49.684] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 49.684] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 49.684] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 49.684] (**) Option "xkb_rules" "evdev"
[ 49.685] (**) Option "xkb_model" "pc105"
[ 49.685] (**) Option "xkb_layout" "de"
[ 49.685] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 49.685] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 49.685] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 49.685] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 49.685] (II) LoadModule: "synaptics"
[ 49.685] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 49.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 49.687] compiled for 1.16.4, module version = 1.8.2
[ 49.687] Module class: X.Org XInput Driver
[ 49.687] ABI class: X.Org XInput driver, version 21.0
[ 49.687] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 49.687] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 49.687] (**) Option "Device" "/dev/input/event14"
[ 49.744] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 49.744] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692 (res 66)
[ 49.744] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680 (res 102)
[ 49.744] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 49.744] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 49.744] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 49.744] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 49.744] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 49.744] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 49.772] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input19/event14"
[ 49.772] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 49.772] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 49.772] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 49.772] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 49.772] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 49.772] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 49.772] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 49.773] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 49.773] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 49.773] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 49.773] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 49.774] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 49.774] (II) No input driver specified, ignoring this device.
[ 49.774] (II) This device may have been added with another device file.
[ 53.730] (II) intel(0): EDID vendor "LGD", prod id 601
[ 53.730] (II) intel(0): Printing DDC gathered Modelines:
[ 53.730] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 13247.892] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 13257.656] (II) UnloadModule: "synaptics"
[ 13257.656] (II) evdev: AT Translated Set 2 keyboard: Close
[ 13257.656] (II) UnloadModule: "evdev"
[ 13257.656] (II) evdev: BisonCam, NB Pro: Close
[ 13257.656] (II) UnloadModule: "evdev"
[ 13257.656] (II) evdev: Logitech Optical USB Mouse: Close
[ 13257.656] (II) UnloadModule: "evdev"
[ 13257.656] (II) evdev: Sleep Button: Close
[ 13257.656] (II) UnloadModule: "evdev"
[ 13257.656] (II) evdev: Power Button: Close
[ 13257.656] (II) UnloadModule: "evdev"
[ 13257.656] (II) evdev: Video Bus: Close
[ 13257.656] (II) UnloadModule: "evdev"
[ 13257.656] (II) evdev: Power Button: Close
[ 13257.656] (II) UnloadModule: "evdev"
[ 13257.758] (II) Server terminated successfully (0). Closing log file.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12494136
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input14/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:LNXPWRBN/button
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=12933484
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12942184
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event8
N: input/event8
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event8
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: LIBINPUT_DEVICE_GROUP=19/0/6/0:LNXVIDEO/video
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=12973793
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12491618
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: LIBINPUT_DEVICE_GROUP=19/0/1/0:PNP0C0C/button
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=12897373
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=12492952
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13/event5
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5/0:PNP0C0D/button
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=12925606
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12492323
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: LIBINPUT_DEVICE_GROUP=19/0/3/0:PNP0C0E/button
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=12925606
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C016.0001/input/input8
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C016.0001/input/input8
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_4_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Optical_USB_Mouse
E: ID_MODEL_ENC=Optical\x20USB\x20Mouse
E: ID_MODEL_ID=c016
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=0340
E: ID_SERIAL=Logitech_Optical_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v046DpC016e0110-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Logitech Optical USB Mouse"
E: PHYS="usb-0000:00:14.0-4/input0"
E: PRODUCT=3/46d/c016/110
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=1894804
P: /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C016.0001/input/input8/event1
N: input/event1
S: input/by-id/usb-Logitech_Optical_USB_Mouse-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_Optical_USB_Mouse-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.0-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C016.0001/input/input8/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Optical_USB_Mouse
E: ID_MODEL_ENC=Optical\x20USB\x20Mouse
E: ID_MODEL_ID=c016
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=0340
E: ID_SERIAL=Logitech_Optical_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: LIBINPUT_DEVICE_GROUP=3/46d/c016/110:usb-0000:00:14.0-4
E: MAJOR=13
E: MINOR=65
E: MOUSE_DPI=400@125
E: SUBSYSTEM=input
E: USEC_INITIALIZED=12896408
P: /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C016.0001/input/input8/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_Optical_USB_Mouse-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:4:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_Optical_USB_Mouse-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C016.0001/input/input8/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Optical_USB_Mouse
E: ID_MODEL_ENC=Optical\x20USB\x20Mouse
E: ID_MODEL_ID=c016
E: ID_PATH=pci-0000:00:14.0-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_4_1_0
E: ID_REVISION=0340
E: ID_SERIAL=Logitech_Optical_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1895184
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=BisonCam__NB_Pro
E: ID_MODEL_ENC=BisonCam\x2c\x20NB\x20Pro
E: ID_MODEL_ID=0401
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_REVISION=0606
E: ID_SERIAL=Bison_BisonCam__NB_Pro
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Bison
E: ID_VENDOR_ENC=Bison
E: ID_VENDOR_ID=5986
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v5986p0401e0606-e0,1,kD4,ramlsfw
E: NAME="BisonCam, NB Pro"
E: PHYS="usb-0000:00:1a.0-1.3/button"
E: PRODUCT=3/5986/401/606
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=13277820
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20/event9
N: input/event9
S: input/by-id/usb-Bison_BisonCam__NB_Pro-event-if00
S: input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.0-event /dev/input/by-id/usb-Bison_BisonCam__NB_Pro-event-if00
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20/event9
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=BisonCam__NB_Pro
E: ID_MODEL_ENC=BisonCam\x2c\x20NB\x20Pro
E: ID_MODEL_ID=0401
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_REVISION=0606
E: ID_SERIAL=Bison_BisonCam__NB_Pro
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Bison
E: ID_VENDOR_ENC=Bison
E: ID_VENDOR_ID=5986
E: LIBINPUT_DEVICE_GROUP=3/5986/401/606:usb-0000:00:1a.0-1
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13314585
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v1106p8446e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/1106/8446/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=13281917
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input17/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input17/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=1/1106/8446/1:card0/codec#0/beep0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13314016
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=14736281
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input18/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input18/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14777734
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=14736529
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input19/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14782046
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=14736314
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input21/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14782285
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=14736436
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input22/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: LIBINPUT_DEVICE_GROUP=0/0/0/0:ALSA
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14765787
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab83
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1076803
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=11/1/1/ab83:isa0060/serio0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=12896334
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio2/input/input7
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio2/input/input7
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio2/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=2355696
P: /devices/platform/i8042/serio2/input/input7/event2
N: input/event2
S: input/by-path/platform-i8042-serio-2-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/i8042/serio2/input/input7/event2
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=32
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=63
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=11/2/7/1b1:isa0060/serio2
E: LIBINPUT_MODEL_JUMPING_SEMI_MT=1
E: LIBINPUT_MODEL_SYNAPTICS_SERIAL_TOUCHPAD=1
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13075396
P: /devices/platform/i8042/serio2/input/input7/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-2-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio2/input/input7/mouse1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2356616
P: /devices/platform/pcspkr/input/input15
E: DEVPATH=/devices/platform/pcspkr/input/input15
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12523326
P: /devices/platform/pcspkr/input/input15/event7
N: input/event7
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/pcspkr/input/input15/event7
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: LIBINPUT_DEVICE_GROUP=10/1f/1/100:isa0061
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=12961506
DRM Information from dmesg:
---------------------------
[ 0.926771] Linux agpgart interface v0.103
[ 11.914900] [drm] Initialized drm 1.1.0 20060810
[ 12.745418] [drm] Memory usable by graphics device = 2048M
[ 12.745422] [drm] Replacing VGA console driver
[ 12.751831] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.751833] [drm] Driver supports precise vblank timestamp query.
[ 12.778686] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 13.167577] fbcon: inteldrmfb (fb0) is primary device
[ 14.688269] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[13350.920866] [drm] stuck on render ring
[13350.921951] [drm] GPU HANG: ecode 7:0:0x85fffff8, in OpenGL dispatch [3599], reason: Ring hung, action: reset
[13350.921953] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[13350.921954] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[13350.921954] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[13350.921955] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[13350.921956] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[13350.924530] drm/i915: Resetting chip after gpu hang
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (900, 'testing'), (600, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.5.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-input-synaptics depends on:
ii libc6 2.22-9
ii libevdev2 1.5.1+dfsg-1
ii libx11-6 2:1.6.3-1
ii libxi6 2:1.7.6-1
ii libxtst6 2:1.2.2-1+b1
ii xserver-xorg-core [xorg-input-abi-22] 2:1.18.3-1
xserver-xorg-input-synaptics recommends no packages.
Versions of packages xserver-xorg-input-synaptics suggests:
pn gpointing-device-settings <none>
pn touchfreeze <none>
-- debconf-show failed
Reply to: