[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#823642: [xserver-xorg-input-synaptics] Driver dosen't take setings from /etc/X11/xorg.conf.d



Package: xserver-xorg-input-synaptics
Version: 1.8.3-1+b1
Severity: normal

--- Please enter the report below this line. ---
Hello
After realising that synaptics driver is not loaded automaticaly
(#823636) I tried to load it forcfuli with synaptics.conf in
/etc/X11/xorg.conf.d (as I have tried to explain in #823607).

The result is that tapping and edge scroling is working but twofinger
scrolling is not working.

Cheers,
Yasen
--- System information. ---
Architecture: amd64
Kernel:       Linux 4.5.0-1-amd64

Debian Release: stretch/sid
  500 testing         ftp.uni-sofia.bg
  500 stable-updates  ftp.uni-sofia.bg
  500 stable          security.debian.org
  500 stable          ftp.uni-sofia.bg
  500 stable          dl.google.com
  100 jessie-backports ftp.uni-sofia.bg

--- Package information. ---
Package's Depends field is empty.

Package's Recommends field is empty.

Package's Suggests field is empty.



-8<---8<---8<---8<---8<---8<---8<---8<---8<--
Please attach the file:
  /tmp/reportbug-ng-xserver-xorg-input-synaptics-xIv5fN.txt
to the mail. I'd do it myself if the output wasn't too long to handle.

  Thank you!
->8--->8--->8--->8--->8--->8--->8--->8--->8--
--- Output from package bug script ---
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)

/etc/X11/xorg.conf does not exist.

Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 512 May  7 00:41 synaptics.conf

/etc/modprobe.d contains no KMS configuration files.

Kernel version (/proc/version):
-------------------------------
Linux version 4.5.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 25869 May  7 00:46 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[     6.721] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[     6.721] X Protocol Version 11, Revision 0
[     6.721] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     6.721] Current Operating System: Linux hp430g2 4.5.0-1-amd64 #1 SMP Debian 4.5.1-1 (2016-04-14) x86_64
[     6.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-amd64 root=UUID=4e40b4ea-b2e1-4f04-b4c5-8aad87e72e80 ro quiet
[     6.721] Build Date: 05 April 2016  07:00:43AM
[     6.721] xorg-server 2:1.18.3-1 (http://www.debian.org/support) 
[     6.721] Current version of pixman: 0.33.6
[     6.721] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.721] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.721] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May  7 00:46:35 2016
[     6.722] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     6.722] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.724] (==) No Layout section.  Using the first Screen section.
[     6.724] (==) No screen section available. Using defaults.
[     6.724] (**) |-->Screen "Default Screen Section" (0)
[     6.724] (**) |   |-->Monitor "<default monitor>"
[     6.725] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     6.725] (==) Automatically adding devices
[     6.725] (==) Automatically enabling devices
[     6.725] (==) Automatically adding GPU devices
[     6.725] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.727] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.727] 	Entry deleted from font path.
[     6.729] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[     6.729] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.729] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.729] (II) Loader magic: 0x559d67472dc0
[     6.729] (II) Module ABI versions:
[     6.729] 	X.Org ANSI C Emulation: 0.4
[     6.729] 	X.Org Video Driver: 20.0
[     6.729] 	X.Org XInput driver : 22.1
[     6.729] 	X.Org Server Extension : 9.0
[     6.729] (++) using VT number 7

[     6.729] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.730] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.731] (--) PCI:*(0:0:2:0) 8086:1616:103c:2246 rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00006000/64
[     6.731] (II) LoadModule: "glx"
[     6.731] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.739] (II) Module glx: vendor="X.Org Foundation"
[     6.739] 	compiled for 1.18.3, module version = 1.0.0
[     6.739] 	ABI class: X.Org Server Extension, version 9.0
[     6.739] (==) AIGLX enabled
[     6.739] (==) Matched intel as autoconfigured driver 0
[     6.739] (==) Matched intel as autoconfigured driver 1
[     6.739] (==) Matched modesetting as autoconfigured driver 2
[     6.739] (==) Matched fbdev as autoconfigured driver 3
[     6.739] (==) Matched vesa as autoconfigured driver 4
[     6.739] (==) Assigned the driver to the xf86ConfigLayout
[     6.739] (II) LoadModule: "intel"
[     6.739] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     6.741] (II) Module intel: vendor="X.Org Foundation"
[     6.741] 	compiled for 1.18.2, module version = 2.99.917
[     6.741] 	Module class: X.Org Video Driver
[     6.741] 	ABI class: X.Org Video Driver, version 20.0
[     6.741] (II) LoadModule: "modesetting"
[     6.741] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.742] (II) Module modesetting: vendor="X.Org Foundation"
[     6.742] 	compiled for 1.18.3, module version = 1.18.3
[     6.742] 	Module class: X.Org Video Driver
[     6.742] 	ABI class: X.Org Video Driver, version 20.0
[     6.742] (II) LoadModule: "fbdev"
[     6.742] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     6.742] (II) Module fbdev: vendor="X.Org Foundation"
[     6.742] 	compiled for 1.18.0, module version = 0.4.4
[     6.742] 	Module class: X.Org Video Driver
[     6.742] 	ABI class: X.Org Video Driver, version 20.0
[     6.742] (II) LoadModule: "vesa"
[     6.742] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.743] (II) Module vesa: vendor="X.Org Foundation"
[     6.743] 	compiled for 1.18.0, module version = 2.3.4
[     6.743] 	Module class: X.Org Video Driver
[     6.743] 	ABI class: X.Org Video Driver, version 20.0
[     6.743] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     6.743] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     6.743] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     6.743] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     6.743] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.743] (II) FBDEV: driver for framebuffer: fbdev
[     6.743] (II) VESA: driver for VESA chipsets: vesa
[     6.746] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151218
[     6.746] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1 (Timo Aaltonen <tjaalton@debian.org>)
[     6.746] (II) intel(0): SNA compiled for use with valgrind
[     6.747] (WW) Falling back to old probe method for modesetting
[     6.747] (WW) Falling back to old probe method for fbdev
[     6.747] (II) Loading sub module "fbdevhw"
[     6.747] (II) LoadModule: "fbdevhw"
[     6.747] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.747] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.747] 	compiled for 1.18.3, module version = 0.0.2
[     6.747] 	ABI class: X.Org Video Driver, version 20.0
[     6.748] (WW) Falling back to old probe method for vesa
[     6.748] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500
[     6.748] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     6.748] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     6.748] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     6.748] (==) intel(0): RGB weight 888
[     6.748] (==) intel(0): Default visual is TrueColor
[     6.749] (II) intel(0): Output eDP1 has no monitor section
[     6.772] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     6.772] (II) intel(0): Enabled output eDP1
[     6.772] (II) intel(0): Output HDMI1 has no monitor section
[     6.772] (II) intel(0): Enabled output HDMI1
[     6.772] (II) intel(0): Output DP1 has no monitor section
[     6.772] (II) intel(0): Enabled output DP1
[     6.772] (II) intel(0): Output HDMI2 has no monitor section
[     6.772] (II) intel(0): Enabled output HDMI2
[     6.772] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     6.772] (II) intel(0): Output VIRTUAL1 has no monitor section
[     6.772] (II) intel(0): Enabled output VIRTUAL1
[     6.772] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[     6.772] (==) intel(0): TearFree disabled
[     6.772] (==) intel(0): DPI set to (96, 96)
[     6.772] (II) Loading sub module "dri2"
[     6.772] (II) LoadModule: "dri2"
[     6.772] (II) Module "dri2" already built-in
[     6.772] (II) Loading sub module "present"
[     6.772] (II) LoadModule: "present"
[     6.772] (II) Module "present" already built-in
[     6.772] (II) UnloadModule: "modesetting"
[     6.772] (II) Unloading modesetting
[     6.772] (II) UnloadModule: "fbdev"
[     6.772] (II) Unloading fbdev
[     6.772] (II) UnloadSubModule: "fbdevhw"
[     6.772] (II) Unloading fbdevhw
[     6.772] (II) UnloadModule: "vesa"
[     6.772] (II) Unloading vesa
[     6.772] (==) Depth 24 pixmap format is 32 bpp
[     6.774] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[     6.774] (==) intel(0): Backing store enabled
[     6.774] (==) intel(0): Silken mouse enabled
[     6.774] (II) intel(0): HW Cursor enabled
[     6.775] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     6.775] (==) intel(0): DPMS enabled
[     6.775] (==) intel(0): Display hotplug detection enabled
[     6.775] (II) intel(0): [DRI2] Setup complete
[     6.775] (II) intel(0): [DRI2]   DRI driver: i965
[     6.775] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     6.775] (II) intel(0): direct rendering: DRI2 enabled
[     6.775] (II) intel(0): hardware support for Present enabled
[     6.775] (--) RandR disabled
[     6.779] (II) SELinux: Disabled on system
[     6.799] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     6.799] (II) AIGLX: enabled GLX_ARB_create_context
[     6.799] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     6.799] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     6.799] (II) AIGLX: enabled GLX_INTEL_swap_event
[     6.799] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     6.799] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     6.799] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     6.799] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     6.799] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     6.799] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     6.799] (II) AIGLX: Loaded and initialized i965
[     6.799] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.801] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     6.802] (II) intel(0): Setting screen physical size to 361 x 203
[     6.849] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.849] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.849] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.849] (II) LoadModule: "libinput"
[     6.850] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.853] (II) Module libinput: vendor="X.Org Foundation"
[     6.853] 	compiled for 1.18.3, module version = 0.18.0
[     6.853] 	Module class: X.Org XInput Driver
[     6.853] 	ABI class: X.Org XInput driver, version 22.1
[     6.853] (II) Using input driver 'libinput' for 'Power Button'
[     6.853] (**) Power Button: always reports core events
[     6.853] (**) Option "Device" "/dev/input/event3"
[     6.853] (**) Option "_source" "server/udev"
[     6.854] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     6.854] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     6.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[     6.864] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.864] (**) Option "xkb_model" "pc105"
[     6.864] (**) Option "xkb_layout" "us,bg"
[     6.864] (**) Option "xkb_variant" ",phonetic"
[     6.864] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[     6.879] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     6.879] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     6.879] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     6.879] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.879] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.879] (II) Using input driver 'libinput' for 'Video Bus'
[     6.879] (**) Video Bus: always reports core events
[     6.879] (**) Option "Device" "/dev/input/event13"
[     6.879] (**) Option "_source" "server/udev"
[     6.880] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard
[     6.880] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[     6.892] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event13"
[     6.892] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.892] (**) Option "xkb_model" "pc105"
[     6.892] (**) Option "xkb_layout" "us,bg"
[     6.892] (**) Option "xkb_variant" ",phonetic"
[     6.892] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[     6.892] (II) input device 'Video Bus', /dev/input/event13 is tagged by udev as: Keyboard
[     6.892] (II) input device 'Video Bus', /dev/input/event13 is a keyboard
[     6.892] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     6.892] (II) No input driver specified, ignoring this device.
[     6.892] (II) This device may have been added with another device file.
[     6.893] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     6.893] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.893] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.893] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.893] (**) Sleep Button: always reports core events
[     6.893] (**) Option "Device" "/dev/input/event1"
[     6.893] (**) Option "_source" "server/udev"
[     6.893] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[     6.893] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[     6.904] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event1"
[     6.904] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     6.904] (**) Option "xkb_model" "pc105"
[     6.904] (**) Option "xkb_layout" "us,bg"
[     6.904] (**) Option "xkb_variant" ",phonetic"
[     6.904] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[     6.904] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[     6.904] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[     6.905] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     6.905] (II) No input driver specified, ignoring this device.
[     6.905] (II) This device may have been added with another device file.
[     6.905] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[     6.905] (II) No input driver specified, ignoring this device.
[     6.905] (II) This device may have been added with another device file.
[     6.905] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[     6.905] (II) No input driver specified, ignoring this device.
[     6.905] (II) This device may have been added with another device file.
[     6.905] (II) config/udev: Adding input device HP HD Webcam (/dev/input/event10)
[     6.905] (**) HP HD Webcam: Applying InputClass "evdev keyboard catchall"
[     6.905] (**) HP HD Webcam: Applying InputClass "libinput keyboard catchall"
[     6.906] (II) Using input driver 'libinput' for 'HP HD Webcam'
[     6.906] (**) HP HD Webcam: always reports core events
[     6.906] (**) Option "Device" "/dev/input/event10"
[     6.906] (**) Option "_source" "server/udev"
[     6.906] (II) input device 'HP HD Webcam', /dev/input/event10 is tagged by udev as: Keyboard
[     6.906] (II) input device 'HP HD Webcam', /dev/input/event10 is a keyboard
[     6.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input17/event10"
[     6.936] (II) XINPUT: Adding extended input device "HP HD Webcam" (type: KEYBOARD, id 9)
[     6.936] (**) Option "xkb_model" "pc105"
[     6.936] (**) Option "xkb_layout" "us,bg"
[     6.936] (**) Option "xkb_variant" ",phonetic"
[     6.936] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[     6.936] (II) input device 'HP HD Webcam', /dev/input/event10 is tagged by udev as: Keyboard
[     6.936] (II) input device 'HP HD Webcam', /dev/input/event10 is a keyboard
[     6.936] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[     6.936] (II) No input driver specified, ignoring this device.
[     6.936] (II) This device may have been added with another device file.
[     6.937] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[     6.937] (II) No input driver specified, ignoring this device.
[     6.937] (II) This device may have been added with another device file.
[     6.937] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[     6.937] (II) No input driver specified, ignoring this device.
[     6.937] (II) This device may have been added with another device file.
[     6.937] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     6.937] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.937] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.937] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.937] (**) AT Translated Set 2 keyboard: always reports core events
[     6.937] (**) Option "Device" "/dev/input/event0"
[     6.937] (**) Option "_source" "server/udev"
[     6.938] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     6.938] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     6.960] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     6.960] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     6.960] (**) Option "xkb_model" "pc105"
[     6.960] (**) Option "xkb_layout" "us,bg"
[     6.960] (**) Option "xkb_variant" ",phonetic"
[     6.960] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[     6.960] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     6.960] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     6.960] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[     6.960] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     6.960] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[     6.961] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     6.961] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     6.961] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     6.961] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall"
[     6.961] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     6.961] (II) LoadModule: "synaptics"
[     6.961] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     6.963] (II) Module synaptics: vendor="X.Org Foundation"
[     6.963] 	compiled for 1.18.0, module version = 1.8.3
[     6.963] 	Module class: X.Org XInput Driver
[     6.963] 	ABI class: X.Org XInput driver, version 22.1
[     6.963] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     6.963] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.963] (**) Option "Device" "/dev/input/event11"
[     7.020] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[     7.020] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1198 - 5742 (res 49)
[     7.020] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 972 - 5004 (res 101)
[     7.020] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     7.020] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     7.020] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     7.020] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     7.020] (**) Option "VertEdgeScroll" "0"
[     7.020] (**) Option "VertTwoFingerScroll" "1"
[     7.020] (**) Option "HorizTwoFingerScroll" "1"
[     7.020] (**) Option "PalmDetect" "1"
[     7.020] (**) Option "AccelFactor" "0.1"
[     7.020] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     7.020] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     7.044] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input15/event11"
[     7.044] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[     7.044] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     7.044] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     7.044] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.100
[     7.044] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     7.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     7.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     7.044] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     7.044] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     7.044] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     7.044] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     7.044] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event12)
[     7.044] (II) No input driver specified, ignoring this device.
[     7.044] (II) This device may have been added with another device file.
[     7.045] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     7.045] (II) No input driver specified, ignoring this device.
[     7.045] (II) This device may have been added with another device file.
[     7.045] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[     7.045] (II) No input driver specified, ignoring this device.
[     7.045] (II) This device may have been added with another device file.
[     7.045] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[     7.045] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     7.045] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.045] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[     7.045] (**) HP WMI hotkeys: always reports core events
[     7.045] (**) Option "Device" "/dev/input/event9"
[     7.045] (**) Option "_source" "server/udev"
[     7.046] (II) input device 'HP WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[     7.046] (II) input device 'HP WMI hotkeys', /dev/input/event9 is a keyboard
[     7.056] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event9"
[     7.056] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[     7.056] (**) Option "xkb_model" "pc105"
[     7.056] (**) Option "xkb_layout" "us,bg"
[     7.056] (**) Option "xkb_variant" ",phonetic"
[     7.056] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[     7.056] (II) input device 'HP WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[     7.056] (II) input device 'HP WMI hotkeys', /dev/input/event9 is a keyboard
[     7.056] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[     7.056] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[     7.056] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.056] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[     7.056] (**) HP Wireless hotkeys: always reports core events
[     7.056] (**) Option "Device" "/dev/input/event4"
[     7.056] (**) Option "_source" "server/udev"
[     7.057] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     7.057] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is a keyboard
[     7.080] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event4"
[     7.080] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[     7.080] (**) Option "xkb_model" "pc105"
[     7.080] (**) Option "xkb_layout" "us,bg"
[     7.080] (**) Option "xkb_variant" ",phonetic"
[     7.080] (**) Option "xkb_options" "grp:lwin_toggle,grp_led:scroll"
[     7.080] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     7.080] (II) input device 'HP Wireless hotkeys', /dev/input/event4 is a keyboard
[     7.100] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event12)
[     7.100] (II) No input driver specified, ignoring this device.
[     7.100] (II) This device may have been added with another device file.
[     7.355] (II) intel(0): EDID vendor "SEC", prod id 14425
[     7.355] (II) intel(0): Printing DDC gathered Modelines:
[     7.355] (II) intel(0): Modeline "1366x768"x0.0   76.30  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (47.5 kHz eP)
[     7.356] (II) intel(0): Modeline "1366x768"x0.0   50.80  1366 1430 1478 1606  768 770 775 792 -hsync -vsync (31.6 kHz e)

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5134394

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5192645
E: XKBLAYOUT=us,bg
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,phonetic

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=6090514

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event13
N: input/event13
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=6120542
E: XKBLAYOUT=us,bg
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,phonetic

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=5132189

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5176489

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5130787

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5193284
E: XKBLAYOUT=us,bg
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,phonetic

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=6544672

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input21/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input21/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6580516

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input22
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input22
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=6544592

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input22/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input22/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6588657

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input23
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input23
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=6545273

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input23/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input23/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6580629

P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input17
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input17
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_7_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_HD_Webcam
E: ID_MODEL_ENC=HP\x20HD\x20Webcam
E: ID_MODEL_ID=b466
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=2867
E: ID_SERIAL=SunplusIT_Inc_HP_HD_Webcam
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_Inc
E: ID_VENDOR_ENC=SunplusIT\x20Inc
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB466e2867-e0,1,kD4,ramlsfw
E: NAME="HP HD Webcam"
E: PHYS="usb-0000:00:14.0-7/button"
E: PRODUCT=3/4f2/b466/2867
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5763505

P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input17/event10
N: input/event10
S: input/by-id/usb-SunplusIT_Inc_HP_HD_Webcam-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-SunplusIT_Inc_HP_HD_Webcam-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input17/event10
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_HD_Webcam
E: ID_MODEL_ENC=HP\x20HD\x20Webcam
E: ID_MODEL_ID=b466
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=2867
E: ID_SERIAL=SunplusIT_Inc_HP_HD_Webcam
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_Inc
E: ID_VENDOR_ENC=SunplusIT\x20Inc
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5800847
E: XKBLAYOUT=us,bg
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,phonetic

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=5217953

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5248568

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=5218019

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input11/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5264515

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0282e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card1/codec#0/beep0"
E: PRODUCT=1/10ec/282/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5208717

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event5
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5248570

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=20 0 0 1500f02100000 43803078f900d401 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,BE,D4,D9,E0,E1,E2,E3,EC,EE,F0,185,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3677058

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_81=f20
E: KEYBOARD_KEY_89=battery
E: KEYBOARD_KEY_8a=screenlock
E: KEYBOARD_KEY_8b=camera
E: KEYBOARD_KEY_8c=media
E: KEYBOARD_KEY_8e=dvd
E: KEYBOARD_KEY_92=brightnessdown
E: KEYBOARD_KEY_97=brightnessup
E: KEYBOARD_KEY_b1=help
E: KEYBOARD_KEY_b3=unknown
E: KEYBOARD_KEY_d7=wlan
E: KEYBOARD_KEY_ee=switchvideomode
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3720125
E: XKBLAYOUT=us,bg
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,phonetic

P: /devices/platform/i8042/serio3/input/input15
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio3/input/input15
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-3
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-3
E: ID_PATH_TAG=platform-i8042-serio-3
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio3/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5812341

P: /devices/platform/i8042/serio3/input/input15/event11
N: input/event11
S: input/by-path/platform-i8042-serio-3-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-3-event-mouse
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/platform/i8042/serio3/input/input15/event11
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=39
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=92
E: ID_PATH=platform-i8042-serio-3
E: ID_PATH_TAG=platform-i8042-serio-3
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5848457

P: /devices/platform/i8042/serio3/input/input15/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-3-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-3-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio3/input/input15/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-3
E: ID_PATH_TAG=platform-i8042-serio-3
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5813678

P: /devices/platform/lis3lv02d/input/input19
E: ABS=7
E: DEVPATH=/devices/platform/lis3lv02d/input/input19
E: EV=9
E: ID_FOR_SEAT=input-platform-lis3lv02d
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MODALIAS=input:b0019v0000p0000e0000-e0,3,kra0,1,2,mlsfw
E: NAME="ST LIS3LV02DL Accelerometer"
E: PHYS="lis3lv02d/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=6088817

P: /devices/platform/lis3lv02d/input/input19/event12
N: input/event12
S: input/by-path/platform-lis3lv02d-event
E: DEVLINKS=/dev/input/by-path/platform-lis3lv02d-event
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/platform/lis3lv02d/input/input19/event12
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6884389

P: /devices/platform/lis3lv02d/input/input19/js0
N: input/js0
E: DEVNAME=/dev/input/js0
E: DEVPATH=/devices/platform/lis3lv02d/input/input19/js0
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MAJOR=13
E: MINOR=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6089350

P: /devices/platform/pcspkr/input/input12
E: DEVPATH=/devices/platform/pcspkr/input/input12
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5264955

P: /devices/platform/pcspkr/input/input12/event8
N: input/event8
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/pcspkr/input/input12/event8
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5300443

P: /devices/virtual/input/input16
E: DEVPATH=/devices/virtual/input/input16
E: EV=33
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=4000000000 0 1000700000000 2102400 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,8D,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5,
E: MSC=10
E: NAME="HP WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=22
E: TAGS=:seat:
E: USEC_INITIALIZED=5275366

P: /devices/virtual/input/input16/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/virtual/input/input16/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5312380
E: XKBLAYOUT=us,bg
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,phonetic

P: /devices/virtual/input/input8
E: DEVPATH=/devices/virtual/input/input8
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=80000000000000 0 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,kF7,ramlsfw
E: NAME="HP Wireless hotkeys"
E: PHYS="hpq6001/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5182157

P: /devices/virtual/input/input8/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/virtual/input/input8/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5216559
E: XKBLAYOUT=us,bg
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:lwin_toggle,grp_led:scroll
E: XKBVARIANT=,phonetic


DRM Information from dmesg:
---------------------------
[    3.628115] Linux agpgart interface v0.103
[    4.624957] [drm] Initialized drm 1.1.0 20060810
[    4.640482] [drm] Memory usable by graphics device = 4096M
[    4.640487] fb: switching to inteldrmfb from simple
[    4.640580] [drm] Replacing VGA console driver
[    4.640614] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[    4.647096] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.647099] [drm] Driver supports precise vblank timestamp query.
[    4.923064] fbcon: inteldrmfb (fb0) is primary device
[    6.531207] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[    6.533596] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

Section "InputClass"
		Identifier		"touchpad catchall"
		Driver			"synaptics"
		MatchIsTouchpad	"on"
		MatchDevicePath	"/dev/input/event*"
		Option			"VertTwoFingerScroll"	"1"
		Option			"HorizTwoFingerScroll"	"1"
		Option			"VertEdgeScroll"		"0"
		Option			"AccelFactor"			"0.1"
		Option			"Palmdetect"			"1"
EndSection

Section "InputClass"
		Identifier		"touchpad ignore duplicates"
		MatchIsTouchpad	"on"
		MatchOS			"Linux"
		MatchDevicePath	"/dev/input/mouse*"
		Option			"Ignore"						"on"		
EndSection


Attachment: signature.asc
Description: OpenPGP digital signature


Reply to: