Package: xserver-xorg-input-synaptics
Version: 1.8.3-1+b1
Severity: normal
I rebooted today with the touchpad working fine and it came back up with
it messed up (bad accelleration, no tap click). For some reason, X
stopped using the synaptics driver for it and fell back to libinput
instead. Rebooting didn't help, still libinput.
My laptop is a Lenovo Yoga 11gs, and has a clickpad and a touch screen.
I last upgraded this package in February and have certianly rebooted
since then, but may have upgraded some stuff in the past week that broke
it.
The xorg log file did not show it loading the synaptics module at all.
I tried adding an xorg.conf.d to force it to load:
Section "Module"
Load "synaptics"
EndSection
While the module loaded, it was still not used for the touchpad.
The resulting log file is attached as Xorg.0.log.old.
I was finally able to workaround the problem by forcing
use of the synaptics driver:
Section "Module"
Load "synaptics"
EndSection
Section "InputClass"
Identifier "touchpad tweaked catchall"
MatchIsTouchpad "on"
Driver "synaptics"
EndSection
The logs below are from starting X in that configuration.
One thing I noticed in the logs when X didn't use synaptics is
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jul 2 2014 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Apr 5 03:05 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:0a1e] (rev 0b)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 173 May 5 18:25 synaptics.conf
KMS configuration files:
------------------------
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 4.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160424 (Debian 5.3.1-16) ) #1 SMP Debian 4.5.2-1 (2016-04-28)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 6592 Sep 8 2014 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 29042 Apr 25 2015 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 24584 May 5 18:26 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 910.095]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 910.095] X Protocol Version 11, Revision 0
[ 910.095] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 910.095] Current Operating System: Linux darkstar 4.5.0-2-amd64 #1 SMP Debian 4.5.2-1 (2016-04-28) x86_64
[ 910.095] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-2-amd64 root=UUID=1619e79b-7dc8-46a1-af37-824e461ea961 ro quiet
[ 910.095] Build Date: 05 April 2016 07:00:43AM
[ 910.095] xorg-server 2:1.18.3-1 (http://www.debian.org/support)
[ 910.095] Current version of pixman: 0.33.6
[ 910.095] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 910.095] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 910.095] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 5 18:26:06 2016
[ 910.095] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 910.095] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 910.095] (==) No Layout section. Using the first Screen section.
[ 910.095] (==) No screen section available. Using defaults.
[ 910.095] (**) |-->Screen "Default Screen Section" (0)
[ 910.095] (**) | |-->Monitor "<default monitor>"
[ 910.095] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 910.095] (==) Automatically adding devices
[ 910.095] (==) Automatically enabling devices
[ 910.095] (==) Automatically adding GPU devices
[ 910.095] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 910.095] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 910.095] Entry deleted from font path.
[ 910.095] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 910.095] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 910.095] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 910.095] (II) Loader magic: 0x558ae86bfdc0
[ 910.095] (II) Module ABI versions:
[ 910.096] X.Org ANSI C Emulation: 0.4
[ 910.096] X.Org Video Driver: 20.0
[ 910.096] X.Org XInput driver : 22.1
[ 910.096] X.Org Server Extension : 9.0
[ 910.097] (++) using VT number 7
[ 910.097] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 910.097] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 910.098] (--) PCI:*(0:0:2:0) 8086:0a1e:17aa:3978 rev 11, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00003000/64
[ 910.098] (II) "glx" will be loaded by default.
[ 910.098] (II) LoadModule: "synaptics"
[ 910.098] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 910.100] (II) Module synaptics: vendor="X.Org Foundation"
[ 910.100] compiled for 1.18.0, module version = 1.8.3
[ 910.100] Module class: X.Org XInput Driver
[ 910.100] ABI class: X.Org XInput driver, version 22.1
[ 910.100] (II) LoadModule: "glx"
[ 910.100] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 910.102] (II) Module glx: vendor="X.Org Foundation"
[ 910.102] compiled for 1.18.3, module version = 1.0.0
[ 910.102] ABI class: X.Org Server Extension, version 9.0
[ 910.102] (==) AIGLX enabled
[ 910.102] (==) Matched intel as autoconfigured driver 0
[ 910.102] (==) Matched intel as autoconfigured driver 1
[ 910.102] (==) Matched modesetting as autoconfigured driver 2
[ 910.102] (==) Matched fbdev as autoconfigured driver 3
[ 910.102] (==) Matched vesa as autoconfigured driver 4
[ 910.102] (==) Assigned the driver to the xf86ConfigLayout
[ 910.102] (II) LoadModule: "intel"
[ 910.102] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 910.102] (II) Module intel: vendor="X.Org Foundation"
[ 910.102] compiled for 1.18.2, module version = 2.99.917
[ 910.102] Module class: X.Org Video Driver
[ 910.102] ABI class: X.Org Video Driver, version 20.0
[ 910.102] (II) LoadModule: "modesetting"
[ 910.102] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 910.102] (II) Module modesetting: vendor="X.Org Foundation"
[ 910.102] compiled for 1.18.3, module version = 1.18.3
[ 910.103] Module class: X.Org Video Driver
[ 910.103] ABI class: X.Org Video Driver, version 20.0
[ 910.103] (II) LoadModule: "fbdev"
[ 910.103] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 910.103] (II) Module fbdev: vendor="X.Org Foundation"
[ 910.103] compiled for 1.18.0, module version = 0.4.4
[ 910.103] Module class: X.Org Video Driver
[ 910.103] ABI class: X.Org Video Driver, version 20.0
[ 910.103] (II) LoadModule: "vesa"
[ 910.103] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 910.103] (II) Module vesa: vendor="X.Org Foundation"
[ 910.103] compiled for 1.18.0, module version = 2.3.4
[ 910.103] Module class: X.Org Video Driver
[ 910.103] ABI class: X.Org Video Driver, version 20.0
[ 910.103] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 910.103] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 910.103] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 910.103] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 910.103] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 910.103] (II) FBDEV: driver for framebuffer: fbdev
[ 910.103] (II) VESA: driver for VESA chipsets: vesa
[ 910.107] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151218
[ 910.107] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 910.107] (II) intel(0): SNA compiled for use with valgrind
[ 910.107] (WW) Falling back to old probe method for modesetting
[ 910.107] (WW) Falling back to old probe method for fbdev
[ 910.107] (II) Loading sub module "fbdevhw"
[ 910.107] (II) LoadModule: "fbdevhw"
[ 910.107] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 910.107] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 910.107] compiled for 1.18.3, module version = 0.0.2
[ 910.107] ABI class: X.Org Video Driver, version 20.0
[ 910.107] (WW) Falling back to old probe method for vesa
[ 910.108] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4200
[ 910.108] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 910.108] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 910.109] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 910.109] (==) intel(0): RGB weight 888
[ 910.109] (==) intel(0): Default visual is TrueColor
[ 910.109] (II) intel(0): Output eDP1 has no monitor section
[ 910.132] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 910.132] (II) intel(0): Enabled output eDP1
[ 910.132] (II) intel(0): Output HDMI1 has no monitor section
[ 910.132] (II) intel(0): Enabled output HDMI1
[ 910.132] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 910.132] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 910.132] (II) intel(0): Enabled output VIRTUAL1
[ 910.132] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 910.132] (==) intel(0): TearFree disabled
[ 910.132] (==) intel(0): DPI set to (96, 96)
[ 910.132] (II) Loading sub module "dri2"
[ 910.132] (II) LoadModule: "dri2"
[ 910.132] (II) Module "dri2" already built-in
[ 910.132] (II) Loading sub module "present"
[ 910.132] (II) LoadModule: "present"
[ 910.132] (II) Module "present" already built-in
[ 910.133] (II) UnloadModule: "modesetting"
[ 910.133] (II) Unloading modesetting
[ 910.133] (II) UnloadModule: "fbdev"
[ 910.133] (II) Unloading fbdev
[ 910.133] (II) UnloadSubModule: "fbdevhw"
[ 910.133] (II) Unloading fbdevhw
[ 910.133] (II) UnloadModule: "vesa"
[ 910.133] (II) Unloading vesa
[ 910.133] (==) Depth 24 pixmap format is 32 bpp
[ 910.133] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 910.133] (==) intel(0): Backing store enabled
[ 910.133] (==) intel(0): Silken mouse enabled
[ 910.134] (II) intel(0): HW Cursor enabled
[ 910.134] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 910.134] (==) intel(0): DPMS enabled
[ 910.134] (==) intel(0): Display hotplug detection enabled
[ 910.134] (II) intel(0): [DRI2] Setup complete
[ 910.134] (II) intel(0): [DRI2] DRI driver: i965
[ 910.134] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 910.134] (II) intel(0): direct rendering: DRI2 enabled
[ 910.134] (II) intel(0): hardware support for Present enabled
[ 910.134] (--) RandR disabled
[ 910.138] (II) SELinux: Disabled on system
[ 910.148] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 910.148] (II) AIGLX: enabled GLX_ARB_create_context
[ 910.148] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 910.148] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 910.148] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 910.148] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 910.148] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 910.148] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 910.148] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 910.148] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 910.148] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 910.148] (II) AIGLX: Loaded and initialized i965
[ 910.148] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 910.150] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 910.150] (II) intel(0): Setting screen physical size to 361 x 203
[ 910.185] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 910.185] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 910.185] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 910.185] (II) LoadModule: "libinput"
[ 910.186] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 910.187] (II) Module libinput: vendor="X.Org Foundation"
[ 910.187] compiled for 1.18.3, module version = 0.18.0
[ 910.187] Module class: X.Org XInput Driver
[ 910.187] ABI class: X.Org XInput driver, version 22.1
[ 910.187] (II) Using input driver 'libinput' for 'Power Button'
[ 910.187] (**) Power Button: always reports core events
[ 910.187] (**) Option "Device" "/dev/input/event4"
[ 910.187] (**) Option "_source" "server/udev"
[ 910.187] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 910.187] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 910.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 910.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 910.196] (**) Option "xkb_model" "pc105"
[ 910.196] (**) Option "xkb_layout" "us"
[ 910.196] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 910.197] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 910.197] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 910.197] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 910.197] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 910.197] (II) Using input driver 'libinput' for 'Video Bus'
[ 910.197] (**) Video Bus: always reports core events
[ 910.197] (**) Option "Device" "/dev/input/event10"
[ 910.197] (**) Option "_source" "server/udev"
[ 910.197] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[ 910.197] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 910.208] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event10"
[ 910.208] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 910.208] (**) Option "xkb_model" "pc105"
[ 910.208] (**) Option "xkb_layout" "us"
[ 910.208] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[ 910.208] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 910.209] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 910.209] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 910.209] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 910.209] (II) Using input driver 'libinput' for 'Power Button'
[ 910.209] (**) Power Button: always reports core events
[ 910.209] (**) Option "Device" "/dev/input/event3"
[ 910.209] (**) Option "_source" "server/udev"
[ 910.209] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 910.209] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 910.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 910.220] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 910.220] (**) Option "xkb_model" "pc105"
[ 910.220] (**) Option "xkb_layout" "us"
[ 910.220] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 910.220] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 910.221] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 910.221] (II) No input driver specified, ignoring this device.
[ 910.221] (II) This device may have been added with another device file.
[ 910.221] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 910.221] (II) No input driver specified, ignoring this device.
[ 910.221] (II) This device may have been added with another device file.
[ 910.222] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 910.222] (II) No input driver specified, ignoring this device.
[ 910.222] (II) This device may have been added with another device file.
[ 910.222] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 910.222] (II) No input driver specified, ignoring this device.
[ 910.222] (II) This device may have been added with another device file.
[ 910.222] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
[ 910.222] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 910.222] (**) Lenovo EasyCamera: Applying InputClass "libinput keyboard catchall"
[ 910.222] (II) Using input driver 'libinput' for 'Lenovo EasyCamera'
[ 910.222] (**) Lenovo EasyCamera: always reports core events
[ 910.222] (**) Option "Device" "/dev/input/event11"
[ 910.222] (**) Option "_source" "server/udev"
[ 910.223] (II) input device 'Lenovo EasyCamera', /dev/input/event11 is tagged by udev as: Keyboard
[ 910.223] (II) input device 'Lenovo EasyCamera', /dev/input/event11 is a keyboard
[ 910.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input12/event11"
[ 910.244] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 9)
[ 910.244] (**) Option "xkb_model" "pc105"
[ 910.244] (**) Option "xkb_layout" "us"
[ 910.244] (II) input device 'Lenovo EasyCamera', /dev/input/event11 is tagged by udev as: Keyboard
[ 910.244] (II) input device 'Lenovo EasyCamera', /dev/input/event11 is a keyboard
[ 910.245] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event12)
[ 910.245] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "evdev touchscreen catchall"
[ 910.245] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "libinput touchscreen catchall"
[ 910.245] (II) Using input driver 'libinput' for 'Atmel Atmel maXTouch Digitizer'
[ 910.245] (**) Atmel Atmel maXTouch Digitizer: always reports core events
[ 910.245] (**) Option "Device" "/dev/input/event12"
[ 910.245] (**) Option "_source" "server/udev"
[ 910.300] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event12 is tagged by udev as: Touchscreen
[ 910.300] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event12 is a touch device
[ 910.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8814.0002/input/input13/event12"
[ 910.324] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 10)
[ 910.324] (**) Option "AccelerationScheme" "none"
[ 910.324] (**) Atmel Atmel maXTouch Digitizer: (accel) selected scheme none/0
[ 910.324] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000
[ 910.324] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4
[ 910.380] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event12 is tagged by udev as: Touchscreen
[ 910.380] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event12 is a touch device
[ 910.381] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse1)
[ 910.381] (II) No input driver specified, ignoring this device.
[ 910.381] (II) This device may have been added with another device file.
[ 910.381] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 910.381] (II) No input driver specified, ignoring this device.
[ 910.381] (II) This device may have been added with another device file.
[ 910.381] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 910.381] (II) No input driver specified, ignoring this device.
[ 910.381] (II) This device may have been added with another device file.
[ 910.381] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 910.381] (II) No input driver specified, ignoring this device.
[ 910.381] (II) This device may have been added with another device file.
[ 910.382] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[ 910.382] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 910.382] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 910.382] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 910.382] (**) Ideapad extra buttons: always reports core events
[ 910.382] (**) Option "Device" "/dev/input/event5"
[ 910.382] (**) Option "_source" "server/udev"
[ 910.382] (II) input device 'Ideapad extra buttons', /dev/input/event5 is tagged by udev as: Keyboard
[ 910.382] (II) input device 'Ideapad extra buttons', /dev/input/event5 is a keyboard
[ 910.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event5"
[ 910.392] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 11)
[ 910.392] (**) Option "xkb_model" "pc105"
[ 910.392] (**) Option "xkb_layout" "us"
[ 910.392] (II) input device 'Ideapad extra buttons', /dev/input/event5 is tagged by udev as: Keyboard
[ 910.392] (II) input device 'Ideapad extra buttons', /dev/input/event5 is a keyboard
[ 910.393] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 910.393] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 910.393] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 910.393] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 910.393] (**) AT Translated Set 2 keyboard: always reports core events
[ 910.393] (**) Option "Device" "/dev/input/event0"
[ 910.393] (**) Option "_source" "server/udev"
[ 910.393] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 910.393] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 910.404] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 910.404] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 910.404] (**) Option "xkb_model" "pc105"
[ 910.404] (**) Option "xkb_layout" "us"
[ 910.404] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 910.404] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 910.405] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 910.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 910.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 910.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 910.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 910.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 910.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall"
[ 910.405] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad tweaked catchall"
[ 910.405] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 910.405] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 910.405] (**) Option "Device" "/dev/input/event1"
[ 910.452] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 910.452] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1242 - 5702 (res 51)
[ 910.452] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1124 - 4730 (res 62)
[ 910.452] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 910.452] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 910.452] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 910.452] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 910.452] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 910.452] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 910.452] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 910.476] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 910.476] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 910.476] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 910.476] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 910.476] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 910.476] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 910.476] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 910.476] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 910.476] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 910.476] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 910.477] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 910.477] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 910.477] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 910.477] (II) No input driver specified, ignoring this device.
[ 910.477] (II) This device may have been added with another device file.
[ 912.134] (II) intel(0): EDID vendor "AUO", prod id 8284
[ 912.134] (II) intel(0): Printing DDC gathered Modelines:
[ 912.134] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 772 778 793 -hsync -vsync (47.6 kHz eP)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=50901137
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=50981184
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=50987129
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event10
N: input/event10
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event10
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=51036941
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=50900121
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=50988959
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=50898998
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=50982763
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=52620965
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=52640911
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=52623134
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=52644480
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=52623136
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=52641665
P: /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input12
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input12
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Lenovo_EasyCamera
E: ID_MODEL_ENC=Lenovo\x20EasyCamera
E: ID_MODEL_ID=b35e
E: ID_PATH=pci-0000:00:14.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_0
E: ID_REVISION=2610
E: ID_SERIAL=Chicony_Electronics_Co._Ltd._Lenovo_EasyCamera_0x0001
E: ID_SERIAL_SHORT=0x0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co._Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd.
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB35Ee2610-e0,1,kD4,ramlsfw
E: NAME="Lenovo EasyCamera"
E: PHYS="usb-0000:00:14.0-1/button"
E: PRODUCT=3/4f2/b35e/2610
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=50995038
P: /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input12/event11
N: input/event11
S: input/by-id/usb-Chicony_Electronics_Co._Ltd._Lenovo_EasyCamera_0x0001-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:1:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:1:1.0-event /dev/input/by-id/usb-Chicony_Electronics_Co._Ltd._Lenovo_EasyCamera_0x0001-event-if00
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input12/event11
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Lenovo_EasyCamera
E: ID_MODEL_ENC=Lenovo\x20EasyCamera
E: ID_MODEL_ID=b35e
E: ID_PATH=pci-0000:00:14.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_0
E: ID_REVISION=2610
E: ID_SERIAL=Chicony_Electronics_Co._Ltd._Lenovo_EasyCamera_0x0001
E: ID_SERIAL_SHORT=0x0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co._Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd.
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=51037582
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8814.0002/input/input13
E: ABS=260800000000003
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8814.0002/input/input13
E: EV=b
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_7_1_0
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Atmel_maXTouch_Digitizer
E: ID_MODEL_ENC=Atmel\x20maXTouch\x20Digitizer
E: ID_MODEL_ID=8814
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=2033
E: ID_SERIAL=Atmel_Atmel_maXTouch_Digitizer
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Atmel
E: ID_VENDOR_ENC=Atmel
E: ID_VENDOR_ID=03eb
E: KEY=400 0 0 0 0 0
E: MODALIAS=input:b0003v03EBp8814e0111-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
E: NAME="Atmel Atmel maXTouch Digitizer"
E: PHYS="usb-0000:00:14.0-7/input0"
E: PRODUCT=3/3eb/8814/111
E: PROP=2
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=50999918
P: /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8814.0002/input/input13/event12
N: input/event12
S: input/by-id/usb-Atmel_Atmel_maXTouch_Digitizer-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event /dev/input/by-id/usb-Atmel_Atmel_maXTouch_Digitizer-event-if00
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8814.0002/input/input13/event12
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=146
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=255
E: ID_MODEL=Atmel_maXTouch_Digitizer
E: ID_MODEL_ENC=Atmel\x20maXTouch\x20Digitizer
E: ID_MODEL_ID=8814
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=2033
E: ID_SERIAL=Atmel_Atmel_maXTouch_Digitizer
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Atmel
E: ID_VENDOR_ENC=Atmel
E: ID_VENDOR_ID=03eb
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=51093182
P: /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8814.0002/input/input13/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8814.0002/input/input13/mouse1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Atmel_maXTouch_Digitizer
E: ID_MODEL_ENC=Atmel\x20maXTouch\x20Digitizer
E: ID_MODEL_ID=8814
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=2033
E: ID_SERIAL=Atmel_Atmel_maXTouch_Digitizer
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Atmel
E: ID_VENDOR_ENC=Atmel
E: ID_VENDOR_ID=03eb
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=51003663
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input7
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v14F1p5114e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card1/codec#0/beep0"
E: PRODUCT=1/14f1/5114/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=50938052
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input7/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input7/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=50983506
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input8
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=50939447
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input8/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input8/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=50996792
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=50940336
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input9/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=50997524
P: /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
E: DEVPATH=/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
E: EV=13
E: ID_FOR_SEAT=input-pci-0000_00_1f_0-platform-VPC2004_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1f.0-platform-VPC2004:00
E: ID_PATH_TAG=pci-0000_00_1f_0-platform-VPC2004_00
E: KEY=1400800100c03 400000000300000 0 2
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k94,95,BA,C0,C1,CA,CB,D4,E3,EE,F0,ram4,lsfw
E: MSC=10
E: NAME="Ideapad extra buttons"
E: PHYS="ideapad/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=50926848
P: /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event5
N: input/event5
S: input/by-path/pci-0000:00:1f.0-platform-VPC2004:00-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1f.0-platform-VPC2004:00-event
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1f.0-platform-VPC2004:00
E: ID_PATH_TAG=pci-0000_00_1f_0-platform-VPC2004_00
E: KEYBOARD_KEY_42=f23
E: KEYBOARD_KEY_43=f22
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=50998247
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab83
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=992590
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=50981203
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input2
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input2
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1757738
P: /devices/platform/i8042/serio1/input/input2/event1
N: input/event1
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event1
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=58
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=87
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=50982026
P: /devices/platform/i8042/serio1/input/input2/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1758158
P: /devices/platform/pcspkr/input/input10
E: DEVPATH=/devices/platform/pcspkr/input/input10
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=50945991
P: /devices/platform/pcspkr/input/input10/event9
N: input/event9
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/platform/pcspkr/input/input10/event9
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=50984248
DRM Information from dmesg:
---------------------------
[ 0.856298] Linux agpgart interface v0.103
[ 50.761357] [drm] Initialized drm 1.1.0 20060810
[ 50.818444] [drm] Memory usable by graphics device = 2048M
[ 50.818450] [drm] Replacing VGA console driver
[ 50.831696] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 50.831701] [drm] Driver supports precise vblank timestamp query.
[ 50.997937] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 50.998029] fbcon: inteldrmfb (fb0) is primary device
[ 52.384181] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.5.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-input-synaptics depends on:
ii libc6 2.22-7
ii libevdev2 1.4.6+dfsg-1
ii libx11-6 2:1.6.3-1
ii libxi6 2:1.7.6-1
ii libxtst6 2:1.2.2-1+b1
ii xserver-xorg-core [xorg-input-abi-22] 2:1.18.3-1
xserver-xorg-input-synaptics recommends no packages.
Versions of packages xserver-xorg-input-synaptics suggests:
pn gpointing-device-settings <none>
pn touchfreeze <none>
-- no debconf information
--
see shy jo
Attachment:
Xorg.0.log.old
Description: application/trash
Attachment:
signature.asc
Description: PGP signature