Bug#823355: xserver-xorg-video-intel: Black screen on TTY's ctrl-alt-F* and black screen when going back to X
Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20160325-1
Severity: important
Hi,
Since last upgrade, I noticed that switching to TTY's with ^-alt-F* gives a black screen, and trying to go back to the X session gives also a black screen.
(I have a dual card though no bumblebee installed, only intel driver is used).
Thanks
Raphael
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Mar 4 2015 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Apr 5 09:05 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT216M [GeForce GT 330M] [10de:0a2b] (rev a2)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 1247 Apr 30 22:55 10-synaptics.conf
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.5.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 29589 May 3 21:35 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 9.013]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 9.013] X Protocol Version 11, Revision 0
[ 9.013] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 9.013] Current Operating System: Linux palikao 4.5.0-1-amd64 #1 SMP Debian 4.5.1-1 (2016-04-14) x86_64
[ 9.013] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-amd64 root=UUID=33ecf725-aba1-4d6b-922a-bd2e0fdac97d ro quiet splash acpi_osi=Linux acpi_backlight=vendor init=/lib/sysvinit/init init=/lib/sysvinit/init init=/sbin/openrc init=/lib/sysvinit/init init=/lib/sysvinit/init init=/lib/sysvinit/init init=/lib/sysvinit/init init=/lib/sysvinit/init init=/lib/sysvinit/init init=/lib/sysvinit/init init=/lib/sysvinit/init init=/lib/sysvinit/init
[ 9.013] Build Date: 05 April 2016 07:00:43AM
[ 9.013] xorg-server 2:1.18.3-1 (http://www.debian.org/support)
[ 9.013] Current version of pixman: 0.33.6
[ 9.013] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.013] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.013] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 3 21:35:44 2016
[ 9.038] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.039] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.045] (==) No Layout section. Using the first Screen section.
[ 9.045] (==) No screen section available. Using defaults.
[ 9.045] (**) |-->Screen "Default Screen Section" (0)
[ 9.045] (**) | |-->Monitor "<default monitor>"
[ 9.046] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.046] (==) Automatically adding devices
[ 9.046] (==) Automatically enabling devices
[ 9.046] (==) Automatically adding GPU devices
[ 9.046] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.060] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.060] Entry deleted from font path.
[ 9.071] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 9.071] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.071] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.071] (II) Loader magic: 0x5633eacaedc0
[ 9.071] (II) Module ABI versions:
[ 9.071] X.Org ANSI C Emulation: 0.4
[ 9.071] X.Org Video Driver: 20.0
[ 9.071] X.Org XInput driver : 22.1
[ 9.071] X.Org Server Extension : 9.0
[ 9.072] (++) using VT number 7
[ 9.072] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.073] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.078] (--) PCI:*(0:0:2:0) 8086:0046:104d:905a rev 2, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00007078/8
[ 9.078] (--) PCI: (0:1:0:0) 10de:0a2b:104d:905a rev 162, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00006000/128, BIOS @ 0x????????/524288
[ 9.078] (II) LoadModule: "glx"
[ 9.086] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.101] (II) Module glx: vendor="X.Org Foundation"
[ 9.101] compiled for 1.18.3, module version = 1.0.0
[ 9.101] ABI class: X.Org Server Extension, version 9.0
[ 9.101] (==) AIGLX enabled
[ 9.101] (==) Matched intel as autoconfigured driver 0
[ 9.101] (==) Matched intel as autoconfigured driver 1
[ 9.101] (==) Matched modesetting as autoconfigured driver 2
[ 9.101] (==) Matched fbdev as autoconfigured driver 3
[ 9.101] (==) Matched vesa as autoconfigured driver 4
[ 9.101] (==) Assigned the driver to the xf86ConfigLayout
[ 9.101] (II) LoadModule: "intel"
[ 9.102] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 9.106] (II) Module intel: vendor="X.Org Foundation"
[ 9.106] compiled for 1.18.2, module version = 2.99.917
[ 9.107] Module class: X.Org Video Driver
[ 9.107] ABI class: X.Org Video Driver, version 20.0
[ 9.107] (II) LoadModule: "modesetting"
[ 9.107] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.108] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.108] compiled for 1.18.3, module version = 1.18.3
[ 9.108] Module class: X.Org Video Driver
[ 9.108] ABI class: X.Org Video Driver, version 20.0
[ 9.108] (II) LoadModule: "fbdev"
[ 9.108] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 9.108] (II) Module fbdev: vendor="X.Org Foundation"
[ 9.108] compiled for 1.18.0, module version = 0.4.4
[ 9.108] Module class: X.Org Video Driver
[ 9.108] ABI class: X.Org Video Driver, version 20.0
[ 9.109] (II) LoadModule: "vesa"
[ 9.109] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9.109] (II) Module vesa: vendor="X.Org Foundation"
[ 9.109] compiled for 1.18.0, module version = 2.3.4
[ 9.109] Module class: X.Org Video Driver
[ 9.109] ABI class: X.Org Video Driver, version 20.0
[ 9.109] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 9.109] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 9.109] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 9.109] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 9.109] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.109] (II) FBDEV: driver for framebuffer: fbdev
[ 9.110] (II) VESA: driver for VESA chipsets: vesa
[ 9.115] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151218
[ 9.115] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1 (Timo Aaltonen <tjaalton@debian.org>)
[ 9.115] (II) intel(0): SNA compiled for use with valgrind
[ 9.116] (WW) Falling back to old probe method for modesetting
[ 9.116] (WW) Falling back to old probe method for fbdev
[ 9.116] (II) Loading sub module "fbdevhw"
[ 9.116] (II) LoadModule: "fbdevhw"
[ 9.116] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 9.117] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 9.117] compiled for 1.18.3, module version = 0.0.2
[ 9.117] ABI class: X.Org Video Driver, version 20.0
[ 9.117] (WW) Falling back to old probe method for vesa
[ 9.118] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 9.118] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 9.118] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.118] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 9.118] (==) intel(0): RGB weight 888
[ 9.118] (==) intel(0): Default visual is TrueColor
[ 9.118] (II) intel(0): Output eDP1 has no monitor section
[ 9.136] (--) intel(0): Found backlight control interface sony (type 'platform') for output eDP1
[ 9.136] (II) intel(0): Enabled output eDP1
[ 9.136] (II) intel(0): Output VGA1 has no monitor section
[ 9.136] (II) intel(0): Enabled output VGA1
[ 9.136] (II) intel(0): Output HDMI1 has no monitor section
[ 9.136] (II) intel(0): Enabled output HDMI1
[ 9.136] (II) intel(0): Output DP1 has no monitor section
[ 9.136] (II) intel(0): Enabled output DP1
[ 9.136] (II) intel(0): Output HDMI2 has no monitor section
[ 9.136] (II) intel(0): Enabled output HDMI2
[ 9.136] (II) intel(0): Output DP2 has no monitor section
[ 9.136] (II) intel(0): Enabled output DP2
[ 9.136] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 9.136] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 9.136] (II) intel(0): Enabled output VIRTUAL1
[ 9.136] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[ 9.136] (==) intel(0): TearFree disabled
[ 9.137] (==) intel(0): DPI set to (96, 96)
[ 9.137] (II) Loading sub module "dri2"
[ 9.137] (II) LoadModule: "dri2"
[ 9.137] (II) Module "dri2" already built-in
[ 9.137] (II) Loading sub module "present"
[ 9.137] (II) LoadModule: "present"
[ 9.137] (II) Module "present" already built-in
[ 9.137] (II) UnloadModule: "modesetting"
[ 9.137] (II) Unloading modesetting
[ 9.137] (II) UnloadModule: "fbdev"
[ 9.137] (II) Unloading fbdev
[ 9.137] (II) UnloadSubModule: "fbdevhw"
[ 9.137] (II) Unloading fbdevhw
[ 9.137] (II) UnloadModule: "vesa"
[ 9.137] (II) Unloading vesa
[ 9.137] (==) Depth 24 pixmap format is 32 bpp
[ 9.143] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 9.143] (==) intel(0): Backing store enabled
[ 9.143] (==) intel(0): Silken mouse enabled
[ 9.143] (II) intel(0): HW Cursor enabled
[ 9.143] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.144] (==) intel(0): DPMS enabled
[ 9.145] (==) intel(0): Display hotplug detection enabled
[ 9.145] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 9.145] (II) intel(0): [DRI2] Setup complete
[ 9.145] (II) intel(0): [DRI2] DRI driver: i965
[ 9.145] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 9.145] (II) intel(0): direct rendering: DRI2 enabled
[ 9.145] (II) intel(0): hardware support for Present enabled
[ 9.145] (--) RandR disabled
[ 9.151] (II) SELinux: Disabled on system
[ 9.180] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 9.180] (II) AIGLX: enabled GLX_ARB_create_context
[ 9.180] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 9.180] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 9.180] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 9.180] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 9.180] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 9.180] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 9.180] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 9.180] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 9.180] (II) AIGLX: Loaded and initialized i965
[ 9.180] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9.191] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 9.191] (II) intel(0): Setting screen physical size to 423 x 238
[ 9.279] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 9.279] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 9.279] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.279] (II) LoadModule: "libinput"
[ 9.288] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 9.295] (II) Module libinput: vendor="X.Org Foundation"
[ 9.295] compiled for 1.18.3, module version = 0.18.0
[ 9.295] Module class: X.Org XInput Driver
[ 9.295] ABI class: X.Org XInput driver, version 22.1
[ 9.295] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.295] (**) Video Bus: always reports core events
[ 9.295] (**) Option "Device" "/dev/input/event9"
[ 9.295] (**) Option "_source" "server/udev"
[ 9.295] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 9.295] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 9.312] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[ 9.312] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 9.312] (**) Option "xkb_model" "pc105"
[ 9.312] (**) Option "xkb_layout" "fr"
[ 9.312] (**) Option "xkb_variant" "oss"
[ 9.312] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 9.342] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 9.342] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 9.343] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 9.343] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 9.343] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 9.343] (II) Using input driver 'libinput' for 'Video Bus'
[ 9.343] (**) Video Bus: always reports core events
[ 9.343] (**) Option "Device" "/dev/input/event10"
[ 9.343] (**) Option "_source" "server/udev"
[ 9.343] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[ 9.343] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 9.352] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input11/event10"
[ 9.352] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.352] (**) Option "xkb_model" "pc105"
[ 9.352] (**) Option "xkb_layout" "fr"
[ 9.352] (**) Option "xkb_variant" "oss"
[ 9.352] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 9.353] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[ 9.353] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 9.354] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
[ 9.354] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 9.354] (**) Sony Vaio Keys: Applying InputClass "libinput keyboard catchall"
[ 9.354] (II) Using input driver 'libinput' for 'Sony Vaio Keys'
[ 9.354] (**) Sony Vaio Keys: always reports core events
[ 9.354] (**) Option "Device" "/dev/input/event4"
[ 9.354] (**) Option "_source" "server/udev"
[ 9.354] (II) input device 'Sony Vaio Keys', /dev/input/event4 is tagged by udev as: Keyboard
[ 9.354] (II) input device 'Sony Vaio Keys', /dev/input/event4 is a keyboard
[ 9.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input5/event4"
[ 9.364] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 8)
[ 9.364] (**) Option "xkb_model" "pc105"
[ 9.364] (**) Option "xkb_layout" "fr"
[ 9.364] (**) Option "xkb_variant" "oss"
[ 9.364] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 9.365] (II) input device 'Sony Vaio Keys', /dev/input/event4 is tagged by udev as: Keyboard
[ 9.365] (II) input device 'Sony Vaio Keys', /dev/input/event4 is a keyboard
[ 9.365] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
[ 9.365] (**) Sony Vaio Jogdial: Applying InputClass "evdev keyboard catchall"
[ 9.365] (**) Sony Vaio Jogdial: Applying InputClass "libinput keyboard catchall"
[ 9.365] (II) Using input driver 'libinput' for 'Sony Vaio Jogdial'
[ 9.365] (**) Sony Vaio Jogdial: always reports core events
[ 9.365] (**) Option "Device" "/dev/input/event5"
[ 9.365] (**) Option "_source" "server/udev"
[ 9.366] (II) input device 'Sony Vaio Jogdial', /dev/input/event5 is tagged by udev as: Keyboard
[ 9.366] (II) input device 'Sony Vaio Jogdial', /dev/input/event5 is a keyboard
[ 9.376] (II) libinput: Sony Vaio Jogdial: needs a virtual subdevice
[ 9.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6/event5"
[ 9.376] (II) XINPUT: Adding extended input device "Sony Vaio Jogdial" (type: MOUSE, id 9)
[ 9.376] (**) Option "AccelerationScheme" "none"
[ 9.376] (**) Sony Vaio Jogdial: (accel) selected scheme none/0
[ 9.376] (**) Sony Vaio Jogdial: (accel) acceleration factor: 2.000
[ 9.376] (**) Sony Vaio Jogdial: (accel) acceleration threshold: 4
[ 9.377] (II) input device 'Sony Vaio Jogdial', /dev/input/event5 is tagged by udev as: Keyboard
[ 9.377] (II) input device 'Sony Vaio Jogdial', /dev/input/event5 is a keyboard
[ 9.377] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[ 9.377] (II) No input driver specified, ignoring this device.
[ 9.377] (II) This device may have been added with another device file.
[ 9.378] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 9.378] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.378] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 9.378] (II) Using input driver 'libinput' for 'Power Button'
[ 9.378] (**) Power Button: always reports core events
[ 9.378] (**) Option "Device" "/dev/input/event3"
[ 9.378] (**) Option "_source" "server/udev"
[ 9.378] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 9.378] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 9.392] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 9.392] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 9.392] (**) Option "xkb_model" "pc105"
[ 9.392] (**) Option "xkb_layout" "fr"
[ 9.392] (**) Option "xkb_variant" "oss"
[ 9.392] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 9.393] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 9.393] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 9.393] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 9.393] (II) No input driver specified, ignoring this device.
[ 9.393] (II) This device may have been added with another device file.
[ 9.394] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 9.394] (II) No input driver specified, ignoring this device.
[ 9.394] (II) This device may have been added with another device file.
[ 9.395] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 9.395] (II) No input driver specified, ignoring this device.
[ 9.395] (II) This device may have been added with another device file.
[ 9.395] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 9.395] (II) No input driver specified, ignoring this device.
[ 9.395] (II) This device may have been added with another device file.
[ 9.396] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[ 9.396] (II) No input driver specified, ignoring this device.
[ 9.396] (II) This device may have been added with another device file.
[ 9.398] (II) config/udev: Adding input device UVC Camera (05ca:18b7) (/dev/input/event11)
[ 9.398] (**) UVC Camera (05ca:18b7): Applying InputClass "evdev keyboard catchall"
[ 9.398] (**) UVC Camera (05ca:18b7): Applying InputClass "libinput keyboard catchall"
[ 9.398] (II) Using input driver 'libinput' for 'UVC Camera (05ca:18b7)'
[ 9.398] (**) UVC Camera (05ca:18b7): always reports core events
[ 9.398] (**) Option "Device" "/dev/input/event11"
[ 9.398] (**) Option "_source" "server/udev"
[ 9.398] (II) input device 'UVC Camera (05ca:18b7)', /dev/input/event11 is tagged by udev as: Keyboard
[ 9.398] (II) input device 'UVC Camera (05ca:18b7)', /dev/input/event11 is a keyboard
[ 9.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12/event11"
[ 9.440] (II) XINPUT: Adding extended input device "UVC Camera (05ca:18b7)" (type: KEYBOARD, id 11)
[ 9.440] (**) Option "xkb_model" "pc105"
[ 9.440] (**) Option "xkb_layout" "fr"
[ 9.440] (**) Option "xkb_variant" "oss"
[ 9.440] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 9.441] (II) input device 'UVC Camera (05ca:18b7)', /dev/input/event11 is tagged by udev as: Keyboard
[ 9.441] (II) input device 'UVC Camera (05ca:18b7)', /dev/input/event11 is a keyboard
[ 9.442] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 9.442] (II) No input driver specified, ignoring this device.
[ 9.442] (II) This device may have been added with another device file.
[ 9.443] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event7)
[ 9.443] (II) No input driver specified, ignoring this device.
[ 9.443] (II) This device may have been added with another device file.
[ 9.443] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[ 9.443] (II) No input driver specified, ignoring this device.
[ 9.443] (II) This device may have been added with another device file.
[ 9.444] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 9.444] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 9.444] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 9.444] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 9.444] (**) AT Translated Set 2 keyboard: always reports core events
[ 9.444] (**) Option "Device" "/dev/input/event0"
[ 9.444] (**) Option "_source" "server/udev"
[ 9.445] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 9.445] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 9.464] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 9.464] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 9.464] (**) Option "xkb_model" "pc105"
[ 9.464] (**) Option "xkb_layout" "fr"
[ 9.464] (**) Option "xkb_variant" "oss"
[ 9.464] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 9.464] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 9.464] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 9.465] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 9.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 9.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 9.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 9.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 9.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 9.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall"
[ 9.465] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad"
[ 9.465] (II) LoadModule: "synaptics"
[ 9.473] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 9.473] (II) Module synaptics: vendor="X.Org Foundation"
[ 9.473] compiled for 1.18.0, module version = 1.8.3
[ 9.473] Module class: X.Org XInput Driver
[ 9.473] ABI class: X.Org XInput driver, version 22.1
[ 9.473] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 9.473] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 9.473] (**) Option "Device" "/dev/input/event1"
[ 9.552] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 9.552] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5698 (res 56)
[ 9.552] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4838 (res 103)
[ 9.552] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 9.552] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 9.552] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 9.552] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 9.552] (**) Option "ClickPad" "0"
[ 9.552] (**) Option "VertEdgeScroll" "1"
[ 9.552] (**) Option "HorizEdgeScroll" "1"
[ 9.552] (**) Option "CornerCoasting" "1"
[ 9.552] (**) Option "VertTwoFingerScroll" "1"
[ 9.552] (**) Option "HorizTwoFingerScroll" "1"
[ 9.552] (**) Option "RBCornerButton" "9"
[ 9.552] (**) Option "LBCornerButton" "8"
[ 9.552] (**) Option "TapButton1" "1"
[ 9.552] (**) Option "TapButton2" "3"
[ 9.552] (**) Option "TapButton3" "2"
[ 9.552] (**) Option "CircularScrolling" "1"
[ 9.552] (**) Option "CircScrollTrigger" "7"
[ 9.552] (**) Option "MinSpeed" "0.5"
[ 9.552] (**) Option "MaxSpeed" "1.0"
[ 9.552] (**) Option "AccelFactor" "0.075"
[ 9.552] (**) Option "CoastingSpeed" "8"
[ 9.552] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 9.552] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 9.584] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[ 9.584] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 9.584] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.0
[ 9.584] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 2.00
[ 9.584] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.075
[ 9.584] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 9.584] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 9.584] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 9.584] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 9.584] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 9.585] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 9.585] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 9.585] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[ 9.585] (II) No input driver specified, ignoring this device.
[ 9.585] (II) This device may have been added with another device file.
[ 9.586] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event17)
[ 9.586] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 9.586] (**) ACPI Virtual Keyboard Device: Applying InputClass "libinput keyboard catchall"
[ 9.586] (II) Using input driver 'libinput' for 'ACPI Virtual Keyboard Device'
[ 9.586] (**) ACPI Virtual Keyboard Device: always reports core events
[ 9.586] (**) Option "Device" "/dev/input/event17"
[ 9.586] (**) Option "_source" "server/udev"
[ 9.587] (II) input device 'ACPI Virtual Keyboard Device', /dev/input/event17 is tagged by udev as: Keyboard
[ 9.587] (II) input device 'ACPI Virtual Keyboard Device', /dev/input/event17 is a keyboard
[ 9.596] (**) Option "config_info" "udev:/sys/devices/virtual/input/input18/event17"
[ 9.596] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[ 9.596] (**) Option "xkb_model" "pc105"
[ 9.596] (**) Option "xkb_layout" "fr"
[ 9.596] (**) Option "xkb_variant" "oss"
[ 9.596] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 9.596] (II) input device 'ACPI Virtual Keyboard Device', /dev/input/event17 is tagged by udev as: Keyboard
[ 9.596] (II) input device 'ACPI Virtual Keyboard Device', /dev/input/event17 is a keyboard
[ 9.611] (**) Sony Vaio Jogdial: Applying InputClass "evdev keyboard catchall"
[ 9.611] (**) Sony Vaio Jogdial: Applying InputClass "libinput keyboard catchall"
[ 9.611] (II) Using input driver 'libinput' for 'Sony Vaio Jogdial'
[ 9.611] (**) Sony Vaio Jogdial: always reports core events
[ 9.611] (**) Option "Device" "/dev/input/event5"
[ 9.611] (**) Option "_source" "_driver/libinput"
[ 9.611] (II) libinput: Sony Vaio Jogdial: is a virtual subdevice
[ 9.612] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6/event5"
[ 9.612] (II) XINPUT: Adding extended input device "Sony Vaio Jogdial" (type: KEYBOARD, id 15)
[ 9.612] (**) Option "xkb_model" "pc105"
[ 9.612] (**) Option "xkb_layout" "fr"
[ 9.612] (**) Option "xkb_variant" "oss"
[ 9.612] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 11.136] (II) intel(0): EDID vendor "SNY", prod id 1786
[ 11.136] (II) intel(0): Using EDID range info for horizontal sync
[ 11.136] (II) intel(0): Using EDID range info for vertical refresh
[ 11.136] (II) intel(0): Printing DDC gathered Modelines:
[ 11.136] (II) intel(0): Modeline "1600x900"x0.0 107.99 1600 1664 1728 1969 900 903 906 915 -hsync -vsync (54.8 kHz eP)
[ 11.136] (II) intel(0): Modeline "1600x900"x0.0 76.09 1600 1664 1728 2079 900 903 906 915 -hsync -vsync (36.6 kHz e)
[ 11.137] (II) intel(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4097953
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4165462
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_01
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4097926
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input11/event10
N: input/event10
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input11/event10
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4172605
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input5
E: EV=13
E: ID_FOR_SEAT=input-acpi-SNY5001_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: KEY=1fd2030000 c00000000 10010000000000 200000000 600f00102c00 8380000240300400 e000000000000 0
E: MODALIAS=input:b0010v104Dp0000e0000-e0,1,4,k71,72,73,8A,94,95,9E,A1,B7,B8,B9,BF,CA,CB,CD,D4,E0,E1,E2,E3,ED,EE,121,168,174,1A2,1A3,1D0,1D1,1D9,1DC,1DE,1DF,1E0,1E1,1E2,1E3,1E4,ram4,lsfw
E: MSC=10
E: NAME="Sony Vaio Keys"
E: PRODUCT=10/104d/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4092100
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input5/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input5/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: KEYBOARD_KEY_05=f21
E: KEYBOARD_KEY_06=mute
E: KEYBOARD_KEY_07=volumedown
E: KEYBOARD_KEY_08=volumeup
E: KEYBOARD_KEY_09=brightnessdown
E: KEYBOARD_KEY_0a=brightnessup
E: KEYBOARD_KEY_0b=switchvideomode
E: KEYBOARD_KEY_0d=zoomout
E: KEYBOARD_KEY_0e=zoomin
E: KEYBOARD_KEY_10=suspend
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4164804
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6
E: EV=7
E: ID_FOR_SEAT=input-acpi-SNY5001_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: KEY=40000 0 0 0 0
E: MODALIAS=input:b0010v104Dp0000e0000-e0,1,2,k112,r8,amlsfw
E: NAME="Sony Vaio Jogdial"
E: PRODUCT=10/104d/0/0
E: PROP=0
E: REL=100
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4093005
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4164921
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/SNY5001:00/input/input6/mouse1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY5001:00
E: ID_PATH_TAG=acpi-SNY5001_00
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4094078
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4091690
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4141757
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=4091177
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=4140772
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=4675583
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4708884
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=4674437
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4708891
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=4677072
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4700945
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=9"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=4677650
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4720760
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=18b7
E: ID_MODEL_ENC=18b7
E: ID_MODEL_ID=18b7
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0104
E: ID_SERIAL=Ricoh_co._Ltd._18b7
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Ricoh_co._Ltd.
E: ID_VENDOR_ENC=Ricoh\x20co.\x20Ltd.
E: ID_VENDOR_ID=05ca
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v05CAp18B7e0104-e0,1,kD4,ramlsfw
E: NAME="UVC Camera (05ca:18b7)"
E: PHYS="usb-0000:00:1a.0-1.2/button"
E: PRODUCT=3/5ca/18b7/104
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4105633
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12/event11
N: input/event11
S: input/by-id/usb-Ricoh_co._Ltd._18b7-event-if00
S: input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Ricoh_co._Ltd._18b7-event-if00 /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.2:1.0-event
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12/event11
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=18b7
E: ID_MODEL_ENC=18b7
E: ID_MODEL_ID=18b7
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_2_1_0
E: ID_REVISION=0104
E: ID_SERIAL=Ricoh_co._Ltd._18b7
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Ricoh_co._Ltd.
E: ID_VENDOR_ENC=Ricoh\x20co.\x20Ltd.
E: ID_VENDOR_ID=05ca
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4177503
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0889e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/889/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4098883
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4141039
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel MID Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=4099323
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4141456
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel MID Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=4099230
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4164805
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4015693
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4141824
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
P: /devices/platform/i8042/serio1/input/input2
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input2
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4015630
P: /devices/platform/i8042/serio1/input/input2/event1
N: input/event1
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/event1
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=33
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=75
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4140814
P: /devices/platform/i8042/serio1/input/input2/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input2/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4039528
P: /devices/platform/pcspkr/input/input13
E: DEVPATH=/devices/platform/pcspkr/input/input13
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4141939
P: /devices/platform/pcspkr/input/input13/event12
N: input/event12
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/platform/pcspkr/input/input13/event12
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4180430
P: /devices/virtual/input/input18
E: DEVPATH=/devices/virtual/input/input18
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=6986054
P: /devices/virtual/input/input18/event17
N: input/event17
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/virtual/input/input18/event17
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=7020758
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: XKBVARIANT=oss
DRM Information from dmesg:
---------------------------
[ 0.687870] Linux agpgart interface v0.103
[ 0.687942] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.687960] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.688484] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 0.688665] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.753276] ata2.00: supports DRM functions and may not be fully accessible
[ 1.762223] ata2.00: supports DRM functions and may not be fully accessible
[ 3.962889] [drm] Initialized drm 1.1.0 20060810
[ 3.995618] [drm] Memory usable by graphics device = 2048M
[ 3.995623] [drm] Replacing VGA console driver
[ 4.004619] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.004622] [drm] Driver supports precise vblank timestamp query.
[ 4.014495] [drm] RC6 disabled, disabling runtime PM support
[ 4.016094] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 4.282583] fbcon: inteldrmfb (fb0) is primary device
[ 5.812082] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (650, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.5.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to fr_FR.UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.22-7
ii libdrm-intel1 2.4.67-1
ii libdrm2 2.4.67-1
ii libpciaccess0 0.13.4-1
ii libpixman-1-0 0.33.6-1
ii libudev1 229-5
ii libx11-6 2:1.6.3-1
ii libx11-xcb1 2:1.6.3-1
ii libxcb-dri2-0 1.11.1-1
ii libxcb-dri3-0 1.11.1-1
ii libxcb-sync1 1.11.1-1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.11.1-1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b2
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.5.0-1
ii libxrender1 1:0.9.9-2
ii libxshmfence1 1.2-1
ii libxss1 1:1.2.2-1
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.9-1
ii xserver-xorg-core [xorg-video-abi-20] 2:1.18.3-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: