Package: xserver-xorg-video-intel Version: 2:2.99.917+git20160325-1
--- Please enter the report below this line. ---
Hi,
I also see this problem with a Sky Lake connected via HDMI. I am using also XFCE but I have seen the same behavior under Cinnamon, which I shortly tried. The Xorg.0.log that I attach shows an error after switching back from a VT: [53676,836] (EE) intel(0): sna_mode_shutdown_crtc: invalid state found on pipe 0, disabling CRTC:21
Regards, Enrique
--- System information. --- Architecture: amd64 Kernel: Linux 4.4.0-1-amd64
Debian Release: stretch/sid 500 testing ftp.de.debian.org
--- Package information. --- Package's Depends field is empty.
Package's Recommends field is empty.
Package's Suggests field is empty.
|
--- Output from package bug script --- X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Apr 7 15:36 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 274 Apr 5 09:05 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1912] (rev 06) /etc/X11/xorg.conf does not exist. /etc/X11/xorg.conf.d does not exist. /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Debian 4.4.6-1 (2016-03-17) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 29176 Apr 14 10:41 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 174.961] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 174.961] X Protocol Version 11, Revision 0 [ 174.961] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 174.961] Current Operating System: Linux pc018866 4.4.0-1-amd64 #1 SMP Debian 4.4.6-1 (2016-03-17) x86_64 [ 174.961] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=/dev/mapper/systemvg-rootlv ro quiet [ 174.961] Build Date: 05 April 2016 07:00:43AM [ 174.961] xorg-server 2:1.18.3-1 (http://www.debian.org/support) [ 174.961] Current version of pixman: 0.33.6 [ 174.961] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 174.961] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 174.962] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 13 19:47:54 2016 [ 174.962] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 174.962] (==) No Layout section. Using the first Screen section. [ 174.962] (==) No screen section available. Using defaults. [ 174.962] (**) |-->Screen "Default Screen Section" (0) [ 174.962] (**) | |-->Monitor "<default monitor>" [ 174.962] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 174.962] (==) Automatically adding devices [ 174.962] (==) Automatically enabling devices [ 174.962] (==) Automatically adding GPU devices [ 174.963] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 174.963] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 174.963] Entry deleted from font path. [ 174.963] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 174.963] (==) ModulePath set to "/usr/lib/xorg/modules" [ 174.963] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 174.963] (II) Loader magic: 0x559811093dc0 [ 174.963] (II) Module ABI versions: [ 174.963] X.Org ANSI C Emulation: 0.4 [ 174.963] X.Org Video Driver: 20.0 [ 174.963] X.Org XInput driver : 22.1 [ 174.963] X.Org Server Extension : 9.0 [ 174.964] (++) using VT number 7 [ 174.964] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 174.965] (II) xfree86: Adding drm device (/dev/dri/card0) [ 174.967] (--) PCI:*(0:0:2:0) 8086:1912:1028:06b9 rev 6, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64 [ 174.967] (II) LoadModule: "glx" [ 174.967] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 174.969] (II) Module glx: vendor="X.Org Foundation" [ 174.969] compiled for 1.18.3, module version = 1.0.0 [ 174.969] ABI class: X.Org Server Extension, version 9.0 [ 174.969] (==) AIGLX enabled [ 174.969] (==) Matched intel as autoconfigured driver 0 [ 174.969] (==) Matched intel as autoconfigured driver 1 [ 174.969] (==) Matched modesetting as autoconfigured driver 2 [ 174.969] (==) Matched fbdev as autoconfigured driver 3 [ 174.969] (==) Matched vesa as autoconfigured driver 4 [ 174.969] (==) Assigned the driver to the xf86ConfigLayout [ 174.969] (II) LoadModule: "intel" [ 174.970] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 174.970] (II) Module intel: vendor="X.Org Foundation" [ 174.970] compiled for 1.18.2, module version = 2.99.917 [ 174.970] Module class: X.Org Video Driver [ 174.970] ABI class: X.Org Video Driver, version 20.0 [ 174.970] (II) LoadModule: "modesetting" [ 174.970] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 174.970] (II) Module modesetting: vendor="X.Org Foundation" [ 174.970] compiled for 1.18.3, module version = 1.18.3 [ 174.970] Module class: X.Org Video Driver [ 174.970] ABI class: X.Org Video Driver, version 20.0 [ 174.970] (II) LoadModule: "fbdev" [ 174.971] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 174.971] (II) Module fbdev: vendor="X.Org Foundation" [ 174.971] compiled for 1.18.0, module version = 0.4.4 [ 174.971] Module class: X.Org Video Driver [ 174.971] ABI class: X.Org Video Driver, version 20.0 [ 174.971] (II) LoadModule: "vesa" [ 174.971] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 174.971] (II) Module vesa: vendor="X.Org Foundation" [ 174.971] compiled for 1.18.0, module version = 2.3.4 [ 174.971] Module class: X.Org Video Driver [ 174.971] ABI class: X.Org Video Driver, version 20.0 [ 174.971] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 174.972] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 174.972] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 174.972] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 174.972] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 174.972] (II) FBDEV: driver for framebuffer: fbdev [ 174.972] (II) VESA: driver for VESA chipsets: vesa [ 174.972] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010 [ 174.972] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1 (Timo Aaltonen <tjaalton@debian.org>) [ 174.972] (II) intel(0): SNA compiled for use with valgrind [ 174.972] (WW) Falling back to old probe method for modesetting [ 174.973] (WW) Falling back to old probe method for fbdev [ 174.973] (II) Loading sub module "fbdevhw" [ 174.973] (II) LoadModule: "fbdevhw" [ 174.973] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 174.973] (II) Module fbdevhw: vendor="X.Org Foundation" [ 174.973] compiled for 1.18.3, module version = 0.0.2 [ 174.973] ABI class: X.Org Video Driver, version 20.0 [ 174.973] (WW) Falling back to old probe method for vesa [ 174.973] (--) intel(0): gen9 engineering sample [ 174.973] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads [ 174.973] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 174.973] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 174.973] (==) intel(0): RGB weight 888 [ 174.973] (==) intel(0): Default visual is TrueColor [ 174.974] (II) intel(0): Output HDMI1 has no monitor section [ 174.974] (II) intel(0): Enabled output HDMI1 [ 174.974] (II) intel(0): Output DP1 has no monitor section [ 174.974] (II) intel(0): Enabled output DP1 [ 174.974] (II) intel(0): Output HDMI2 has no monitor section [ 174.974] (II) intel(0): Enabled output HDMI2 [ 174.974] (II) intel(0): Output DP2 has no monitor section [ 174.974] (II) intel(0): Enabled output DP2 [ 174.975] (II) intel(0): Output HDMI3 has no monitor section [ 174.975] (II) intel(0): Enabled output HDMI3 [ 174.975] (II) intel(0): Output DP3 has no monitor section [ 174.975] (II) intel(0): Enabled output DP3 [ 174.975] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 174.975] (II) intel(0): Output VIRTUAL1 has no monitor section [ 174.975] (II) intel(0): Enabled output VIRTUAL1 [ 174.975] (--) intel(0): Output HDMI1 using initial mode 1920x1200 on pipe 0 [ 174.975] (==) intel(0): TearFree disabled [ 174.975] (==) intel(0): DPI set to (96, 96) [ 174.975] (II) Loading sub module "dri2" [ 174.975] (II) LoadModule: "dri2" [ 174.975] (II) Module "dri2" already built-in [ 174.975] (II) Loading sub module "present" [ 174.975] (II) LoadModule: "present" [ 174.975] (II) Module "present" already built-in [ 174.975] (II) UnloadModule: "modesetting" [ 174.975] (II) Unloading modesetting [ 174.975] (II) UnloadModule: "fbdev" [ 174.975] (II) Unloading fbdev [ 174.975] (II) UnloadSubModule: "fbdevhw" [ 174.975] (II) Unloading fbdevhw [ 174.976] (II) UnloadModule: "vesa" [ 174.976] (II) Unloading vesa [ 174.976] (==) Depth 24 pixmap format is 32 bpp [ 174.976] (II) intel(0): SNA initialized with generic backend [ 174.976] (==) intel(0): Backing store enabled [ 174.976] (==) intel(0): Silken mouse enabled [ 174.976] (II) intel(0): HW Cursor enabled [ 174.976] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 174.976] (==) intel(0): DPMS enabled [ 174.976] (==) intel(0): Display hotplug detection enabled [ 174.976] (II) intel(0): Textured video not supported on this hardware or backend [ 174.976] (II) intel(0): [DRI2] Setup complete [ 174.976] (II) intel(0): [DRI2] DRI driver: i965 [ 174.977] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 174.977] (II) intel(0): direct rendering: DRI2 enabled [ 174.977] (II) intel(0): hardware support for Present enabled [ 174.977] (--) RandR disabled [ 174.985] (II) SELinux: Disabled on system [ 175.000] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 175.000] (II) AIGLX: enabled GLX_ARB_create_context [ 175.000] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 175.000] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 175.000] (II) AIGLX: enabled GLX_INTEL_swap_event [ 175.000] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 175.000] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 175.000] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 175.000] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 175.000] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 175.000] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 175.000] (II) AIGLX: Loaded and initialized i965 [ 175.000] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 175.004] (II) intel(0): switch to mode 1920x1200@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 175.004] (II) intel(0): Setting screen physical size to 508 x 317 [ 175.028] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 175.028] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 175.028] (II) LoadModule: "evdev" [ 175.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 175.028] (II) Module evdev: vendor="X.Org Foundation" [ 175.028] compiled for 1.18.0, module version = 2.10.1 [ 175.028] Module class: X.Org XInput Driver [ 175.028] ABI class: X.Org XInput driver, version 22.1 [ 175.028] (II) Using input driver 'evdev' for 'Power Button' [ 175.028] (**) Power Button: always reports core events [ 175.028] (**) evdev: Power Button: Device: "/dev/input/event5" [ 175.028] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 175.028] (--) evdev: Power Button: Found keys [ 175.028] (II) evdev: Power Button: Configuring as keyboard [ 175.028] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5" [ 175.028] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 175.028] (**) Option "xkb_rules" "evdev" [ 175.028] (**) Option "xkb_model" "pc105" [ 175.028] (**) Option "xkb_layout" "us" [ 175.028] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 175.028] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 175.028] (II) Using input driver 'evdev' for 'Video Bus' [ 175.028] (**) Video Bus: always reports core events [ 175.028] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 175.028] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 175.028] (--) evdev: Video Bus: Found keys [ 175.028] (II) evdev: Video Bus: Configuring as keyboard [ 175.028] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8" [ 175.028] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 175.028] (**) Option "xkb_rules" "evdev" [ 175.028] (**) Option "xkb_model" "pc105" [ 175.028] (**) Option "xkb_layout" "us" [ 175.029] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 175.029] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 175.029] (II) Using input driver 'evdev' for 'Power Button' [ 175.029] (**) Power Button: always reports core events [ 175.029] (**) evdev: Power Button: Device: "/dev/input/event4" [ 175.029] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 175.029] (--) evdev: Power Button: Found keys [ 175.029] (II) evdev: Power Button: Configuring as keyboard [ 175.029] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4" [ 175.029] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 175.029] (**) Option "xkb_rules" "evdev" [ 175.029] (**) Option "xkb_model" "pc105" [ 175.029] (**) Option "xkb_layout" "us" [ 175.029] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 175.029] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 175.029] (II) Using input driver 'evdev' for 'Sleep Button' [ 175.029] (**) Sleep Button: always reports core events [ 175.029] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 175.029] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 175.029] (--) evdev: Sleep Button: Found keys [ 175.029] (II) evdev: Sleep Button: Configuring as keyboard [ 175.029] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event3" [ 175.029] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 175.029] (**) Option "xkb_rules" "evdev" [ 175.029] (**) Option "xkb_model" "pc105" [ 175.029] (**) Option "xkb_layout" "us" [ 175.030] (II) config/udev: Adding input device Dell KB216 Wired Keyboard (/dev/input/event0) [ 175.030] (**) Dell KB216 Wired Keyboard: Applying InputClass "evdev keyboard catchall" [ 175.030] (II) Using input driver 'evdev' for 'Dell KB216 Wired Keyboard' [ 175.030] (**) Dell KB216 Wired Keyboard: always reports core events [ 175.030] (**) evdev: Dell KB216 Wired Keyboard: Device: "/dev/input/event0" [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Vendor 0x413c Product 0x2113 [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Found keys [ 175.030] (II) evdev: Dell KB216 Wired Keyboard: Configuring as keyboard [ 175.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2113.0001/input/input3/event0" [ 175.030] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard" (type: KEYBOARD, id 10) [ 175.030] (**) Option "xkb_rules" "evdev" [ 175.030] (**) Option "xkb_model" "pc105" [ 175.030] (**) Option "xkb_layout" "us" [ 175.030] (II) config/udev: Adding input device Dell KB216 Wired Keyboard (/dev/input/event1) [ 175.030] (**) Dell KB216 Wired Keyboard: Applying InputClass "evdev keyboard catchall" [ 175.030] (II) Using input driver 'evdev' for 'Dell KB216 Wired Keyboard' [ 175.030] (**) Dell KB216 Wired Keyboard: always reports core events [ 175.030] (**) evdev: Dell KB216 Wired Keyboard: Device: "/dev/input/event1" [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Vendor 0x413c Product 0x2113 [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Found keys [ 175.030] (II) evdev: Dell KB216 Wired Keyboard: Configuring as keyboard [ 175.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0002/input/input4/event1" [ 175.030] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard" (type: KEYBOARD, id 11) [ 175.030] (**) Option "xkb_rules" "evdev" [ 175.030] (**) Option "xkb_model" "pc105" [ 175.030] (**) Option "xkb_layout" "us" [ 175.031] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/event2) [ 175.031] (**) PixArt Dell MS116 USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 175.031] (II) Using input driver 'evdev' for 'PixArt Dell MS116 USB Optical Mouse' [ 175.031] (**) PixArt Dell MS116 USB Optical Mouse: always reports core events [ 175.031] (**) evdev: PixArt Dell MS116 USB Optical Mouse: Device: "/dev/input/event2" [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Vendor 0x413c Product 0x301a [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found 12 mouse buttons [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found scroll wheel(s) [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found relative axes [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found x and y relative axes [ 175.084] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Configuring as mouse [ 175.084] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Adding scrollwheel support [ 175.084] (**) evdev: PixArt Dell MS116 USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 175.084] (**) evdev: PixArt Dell MS116 USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 175.084] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0003/input/input5/event2" [ 175.084] (II) XINPUT: Adding extended input device "PixArt Dell MS116 USB Optical Mouse" (type: MOUSE, id 12) [ 175.084] (II) evdev: PixArt Dell MS116 USB Optical Mouse: initialized for relative axes. [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration profile 0 [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration factor: 2.000 [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration threshold: 4 [ 175.084] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/mouse0) [ 175.084] (II) No input driver specified, ignoring this device. [ 175.084] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event10) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.086] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13) [ 175.086] (II) No input driver specified, ignoring this device. [ 175.086] (II) This device may have been added with another device file. [ 175.086] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14) [ 175.086] (II) No input driver specified, ignoring this device. [ 175.086] (II) This device may have been added with another device file. [ 175.086] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 175.086] (II) No input driver specified, ignoring this device. [ 175.086] (II) This device may have been added with another device file. [ 175.087] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7) [ 175.087] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 175.087] (II) Using input driver 'evdev' for 'Dell WMI hotkeys' [ 175.087] (**) Dell WMI hotkeys: always reports core events [ 175.087] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7" [ 175.087] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0 [ 175.087] (--) evdev: Dell WMI hotkeys: Found keys [ 175.087] (II) evdev: Dell WMI hotkeys: Configuring as keyboard [ 175.087] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event7" [ 175.087] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13) [ 175.087] (**) Option "xkb_rules" "evdev" [ 175.087] (**) Option "xkb_model" "pc105" [ 175.087] (**) Option "xkb_layout" "us" [ 177.624] (II) AIGLX: Suspending AIGLX clients for VT switch [ 194.176] (II) AIGLX: Resuming AIGLX clients after VT switch [ 194.177] (II) intel(0): switch to mode 1920x1200@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 52745.098] (II) intel(0): EDID vendor "DEL", prod id 41004 [ 52745.098] (II) intel(0): Using EDID range info for horizontal sync [ 52745.098] (II) intel(0): Using EDID range info for vertical refresh [ 52745.098] (II) intel(0): Printing DDC gathered Modelines: [ 52745.098] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 52745.098] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 52745.098] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 52745.098] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 52745.098] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 52745.098] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 52745.098] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 52745.098] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 52745.098] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 52745.098] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 52745.098] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 52745.098] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 52745.098] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 52745.098] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 52745.099] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 52745.099] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 52745.099] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 52745.099] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 52745.099] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e) [ 52745.099] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e) [ 53011.940] (II) AIGLX: Suspending AIGLX clients for VT switch [ 53071.927] (II) config/udev: removing device PixArt Dell MS116 USB Optical Mouse [ 53071.929] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Close [ 53071.930] (II) UnloadModule: "evdev" [ 53073.634] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/mouse0) [ 53073.634] (II) No input driver specified, ignoring this device. [ 53073.634] (II) This device may have been added with another device file. [ 53073.715] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/event2) [ 53073.715] (**) PixArt Dell MS116 USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 53073.715] (II) Using input driver 'evdev' for 'PixArt Dell MS116 USB Optical Mouse' [ 53073.715] (**) PixArt Dell MS116 USB Optical Mouse: always reports core events [ 53073.715] (**) evdev: PixArt Dell MS116 USB Optical Mouse: Device: "/dev/input/event2" [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Vendor 0x413c Product 0x301a [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found 12 mouse buttons [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found scroll wheel(s) [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found relative axes [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found x and y relative axes [ 53073.715] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Configuring as mouse [ 53073.715] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Adding scrollwheel support [ 53073.715] (**) evdev: PixArt Dell MS116 USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 53073.715] (**) evdev: PixArt Dell MS116 USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 53073.715] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0004/input/input18/event2" [ 53073.716] (II) XINPUT: Adding extended input device "PixArt Dell MS116 USB Optical Mouse" (type: MOUSE, id 12) [ 53073.716] (II) evdev: PixArt Dell MS116 USB Optical Mouse: initialized for relative axes. [ 53073.716] (**) PixArt Dell MS116 USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 53073.717] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration profile 0 [ 53073.717] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration factor: 2.000 [ 53073.717] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration threshold: 4 [ 53676.836] (II) AIGLX: Resuming AIGLX clients after VT switch [ 53676.836] (EE) intel(0): sna_mode_shutdown_crtc: invalid state found on pipe 0, disabling CRTC:21 [ 53703.920] (II) AIGLX: Suspending AIGLX clients for VT switch [ 53763.915] (II) config/udev: removing device PixArt Dell MS116 USB Optical Mouse [ 53763.917] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Close [ 53763.917] (II) UnloadModule: "evdev" [ 53765.625] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/mouse0) [ 53765.625] (II) No input driver specified, ignoring this device. [ 53765.625] (II) This device may have been added with another device file. [ 53765.719] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/event2) [ 53765.719] (**) PixArt Dell MS116 USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 53765.719] (II) Using input driver 'evdev' for 'PixArt Dell MS116 USB Optical Mouse' [ 53765.719] (**) PixArt Dell MS116 USB Optical Mouse: always reports core events [ 53765.719] (**) evdev: PixArt Dell MS116 USB Optical Mouse: Device: "/dev/input/event2" [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Vendor 0x413c Product 0x301a [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found 12 mouse buttons [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found scroll wheel(s) [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found relative axes [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found x and y relative axes [ 53765.772] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Configuring as mouse [ 53765.772] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Adding scrollwheel support [ 53765.772] (**) evdev: PixArt Dell MS116 USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 53765.772] (**) evdev: PixArt Dell MS116 USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 53765.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19/event2" [ 53765.772] (II) XINPUT: Adding extended input device "PixArt Dell MS116 USB Optical Mouse" (type: MOUSE, id 12) [ 53765.772] (II) evdev: PixArt Dell MS116 USB Optical Mouse: initialized for relative axes. [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration profile 0 [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration factor: 2.000 [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration threshold: 4 udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2925439 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2984362 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b00000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2969689 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8 N: input/event8 E: BACKSPACE=guess E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=3008321 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2925206 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4 N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2968804 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0E_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2925137 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=2968494 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2113.0001/input/input3 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2113.0001/input/input3 E: EV=120013 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_6_1_0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_MODEL=Dell_KB216_Wired_Keyboard E: ID_MODEL_ENC=Dell\x20KB216\x20Wired\x20Keyboard E: ID_MODEL_ID=2113 E: ID_PATH=pci-0000:00:14.0-usb-0:6:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_6_1_0 E: ID_REVISION=0108 E: ID_SERIAL=413c_Dell_KB216_Wired_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=413c E: ID_VENDOR_ENC=413c E: ID_VENDOR_ID=413c E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0003v413Cp2113e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw E: MSC=10 E: NAME="Dell KB216 Wired Keyboard" E: PHYS="usb-0000:00:14.0-6/input0" E: PRODUCT=3/413c/2113/111 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=1177391 P: /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2113.0001/input/input3/event0 N: input/event0 S: input/by-id/usb-413c_Dell_KB216_Wired_Keyboard-event-kbd S: input/by-path/pci-0000:00:14.0-usb-0:6:1.0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:6:1.0-event-kbd /dev/input/by-id/usb-413c_Dell_KB216_Wired_Keyboard-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2113.0001/input/input3/event0 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_MODEL=Dell_KB216_Wired_Keyboard E: ID_MODEL_ENC=Dell\x20KB216\x20Wired\x20Keyboard E: ID_MODEL_ID=2113 E: ID_PATH=pci-0000:00:14.0-usb-0:6:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_6_1_0 E: ID_REVISION=0108 E: ID_SERIAL=413c_Dell_KB216_Wired_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=413c E: ID_VENDOR_ENC=413c E: ID_VENDOR_ID=413c E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=2968784 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0002/input/input4 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0002/input/input4 E: EV=13 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_6_1_1 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Dell_KB216_Wired_Keyboard E: ID_MODEL_ENC=Dell\x20KB216\x20Wired\x20Keyboard E: ID_MODEL_ID=2113 E: ID_PATH=pci-0000:00:14.0-usb-0:6:1.1 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_6_1_1 E: ID_REVISION=0108 E: ID_SERIAL=413c_Dell_KB216_Wired_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_VENDOR=413c E: ID_VENDOR_ENC=413c E: ID_VENDOR_ID=413c E: KEY=80002000000 387ad801d001 1e000000000000 0 E: MODALIAS=input:b0003v413Cp2113e0111-e0,1,4,k71,72,73,74,80,8C,8E,8F,90,9B,9C,9E,9F,A1,A3,A4,A5,A6,AB,AC,AD,D9,EB,ram4,lsfw E: MSC=10 E: NAME="Dell KB216 Wired Keyboard" E: PHYS="usb-0000:00:14.0-6/input1" E: PRODUCT=3/413c/2113/111 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=1177361 P: /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0002/input/input4/event1 N: input/event1 S: input/by-id/usb-413c_Dell_KB216_Wired_Keyboard-event-if01 S: input/by-path/pci-0000:00:14.0-usb-0:6:1.1-event E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:6:1.1-event /dev/input/by-id/usb-413c_Dell_KB216_Wired_Keyboard-event-if01 E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0002/input/input4/event1 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=Dell_KB216_Wired_Keyboard E: ID_MODEL_ENC=Dell\x20KB216\x20Wired\x20Keyboard E: ID_MODEL_ID=2113 E: ID_PATH=pci-0000:00:14.0-usb-0:6:1.1 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_6_1_1 E: ID_REVISION=0108 E: ID_SERIAL=413c_Dell_KB216_Wired_Keyboard E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030101:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_VENDOR=413c E: ID_VENDOR_ENC=413c E: ID_VENDOR_ID=413c E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: USEC_INITIALIZED=2968847 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19 E: EV=17 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_8_1_0 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Dell_MS116_USB_Optical_Mouse E: ID_MODEL_ENC=Dell\x20MS116\x20USB\x20Optical\x20Mouse E: ID_MODEL_ID=301a E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0 E: ID_REVISION=0100 E: ID_SERIAL=PixArt_Dell_MS116_USB_Optical_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=PixArt E: ID_VENDOR_ENC=PixArt E: ID_VENDOR_ID=413c E: KEY=ff0000 0 0 0 0 E: MODALIAS=input:b0003v413Cp301Ae0111-e0,1,2,4,k110,111,112,113,114,115,116,117,r0,1,8,am4,lsfw E: MSC=10 E: NAME="PixArt Dell MS116 USB Optical Mouse" E: PHYS="usb-0000:00:14.0-8/input0" E: PRODUCT=3/413c/301a/111 E: PROP=0 E: REL=103 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=53765623858 P: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19/event2 N: input/event2 S: input/by-id/usb-PixArt_Dell_MS116_USB_Optical_Mouse-event-mouse S: input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event-mouse E: DEVLINKS=/dev/input/by-id/usb-PixArt_Dell_MS116_USB_Optical_Mouse-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event-mouse E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19/event2 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Dell_MS116_USB_Optical_Mouse E: ID_MODEL_ENC=Dell\x20MS116\x20USB\x20Optical\x20Mouse E: ID_MODEL_ID=301a E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0 E: ID_REVISION=0100 E: ID_SERIAL=PixArt_Dell_MS116_USB_Optical_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=PixArt E: ID_VENDOR_ENC=PixArt E: ID_VENDOR_ID=413c E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: USEC_INITIALIZED=53765718341 P: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19/mouse0 N: input/mouse0 S: input/by-id/usb-PixArt_Dell_MS116_USB_Optical_Mouse-mouse S: input/by-path/pci-0000:00:14.0-usb-0:8:1.0-mouse E: DEVLINKS=/dev/input/by-id/usb-PixArt_Dell_MS116_USB_Optical_Mouse-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:8:1.0-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19/mouse0 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Dell_MS116_USB_Optical_Mouse E: ID_MODEL_ENC=Dell\x20MS116\x20USB\x20Optical\x20Mouse E: ID_MODEL_ID=301a E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0 E: ID_REVISION=0100 E: ID_SERIAL=PixArt_Dell_MS116_USB_Optical_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=PixArt E: ID_VENDOR_ENC=PixArt E: ID_VENDOR_ID=413c E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=53765625162 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input12 E: EV=40001 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0001v10ECp0255e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PRODUCT=1/10ec/255/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=4020304 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input12/event9 N: input/event9 E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input12/event9 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=4056638 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input13 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel PCH Headphone Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=4021754 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input13/event10 N: input/event10 E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input13/event10 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: USEC_INITIALIZED=4048296 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input14 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6, E: NAME="HDA Intel PCH Line Out" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=40 E: TAGS=:seat: E: USEC_INITIALIZED=4019737 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input14/event11 N: input/event11 E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input14/event11 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: USEC_INITIALIZED=4060498 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input15 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=3" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=4018787 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input15/event12 N: input/event12 E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input15/event12 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: USEC_INITIALIZED=4056368 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input16 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=7" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=4022134 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input16/event13 N: input/event13 E: DEVNAME=/dev/input/event13 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input16/event13 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=77 E: SUBSYSTEM=input E: USEC_INITIALIZED=4056409 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input17 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1f_3 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel PCH HDMI/DP,pcm=8" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=4022492 P: /devices/pci0000:00/0000:00:1f.3/sound/card0/input17/event14 N: input/event14 E: DEVNAME=/dev/input/event14 E: DEVPATH=/devices/pci0000:00/0000:00:1f.3/sound/card0/input17/event14 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1f.3 E: ID_PATH_TAG=pci-0000_00_1f_3 E: MAJOR=13 E: MINOR=78 E: SUBSYSTEM=input E: USEC_INITIALIZED=4056675 P: /devices/platform/pcspkr/input/input9 E: DEVPATH=/devices/platform/pcspkr/input/input9 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2930417 P: /devices/platform/pcspkr/input/input9/event6 N: input/event6 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/platform/pcspkr/input/input9/event6 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: USEC_INITIALIZED=2984354 P: /devices/virtual/input/input10 E: DEVPATH=/devices/virtual/input/input10 E: EV=13 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: KEY=1000b00000400 100000 e000000000000 0 E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k71,72,73,94,CA,E0,E1,E3,F0,ram4,lsfw E: MSC=10 E: NAME="Dell WMI hotkeys" E: PHYS="wmi/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=2956453 P: /devices/virtual/input/input10/event7 N: input/event7 E: BACKSPACE=guess E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/virtual/input/input10/event7 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=3000575 E: XKBLAYOUT=us E: XKBMODEL=pc105 DRM Information from dmesg: --------------------------- [ 0.475674] Linux agpgart interface v0.103 [ 2.890959] [drm] Initialized drm 1.1.0 20060810 [ 2.938353] [drm] Memory usable by graphics device = 4096M [ 2.938355] [drm] Replacing VGA console driver [ 2.939140] [drm:finish_csr_load [i915]] *ERROR* failed to load firmware i915/skl_dmc_ver1.bin (0) [ 2.945363] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.945365] [drm] Driver supports precise vblank timestamp query. [ 2.948233] [drm:intel_guc_ucode_init [i915]] *ERROR* Failed to fetch GuC firmware from i915/skl_guc_ver4.bin (error -2) [ 2.949378] [drm:i915_gem_init_hw [i915]] *ERROR* Failed to initialize GuC, error -5 (ignored) [ 3.237019] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 3.237491] fbcon: inteldrmfb (fb0) is primary device [ 3.868975] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.769283] [drm] RC6 on
[ 174.961] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 174.961] X Protocol Version 11, Revision 0 [ 174.961] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 174.961] Current Operating System: Linux pc018866 4.4.0-1-amd64 #1 SMP Debian 4.4.6-1 (2016-03-17) x86_64 [ 174.961] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=/dev/mapper/systemvg-rootlv ro quiet [ 174.961] Build Date: 05 April 2016 07:00:43AM [ 174.961] xorg-server 2:1.18.3-1 (http://www.debian.org/support) [ 174.961] Current version of pixman: 0.33.6 [ 174.961] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 174.961] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 174.962] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 13 19:47:54 2016 [ 174.962] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 174.962] (==) No Layout section. Using the first Screen section. [ 174.962] (==) No screen section available. Using defaults. [ 174.962] (**) |-->Screen "Default Screen Section" (0) [ 174.962] (**) | |-->Monitor "<default monitor>" [ 174.962] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 174.962] (==) Automatically adding devices [ 174.962] (==) Automatically enabling devices [ 174.962] (==) Automatically adding GPU devices [ 174.963] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 174.963] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 174.963] Entry deleted from font path. [ 174.963] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 174.963] (==) ModulePath set to "/usr/lib/xorg/modules" [ 174.963] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 174.963] (II) Loader magic: 0x559811093dc0 [ 174.963] (II) Module ABI versions: [ 174.963] X.Org ANSI C Emulation: 0.4 [ 174.963] X.Org Video Driver: 20.0 [ 174.963] X.Org XInput driver : 22.1 [ 174.963] X.Org Server Extension : 9.0 [ 174.964] (++) using VT number 7 [ 174.964] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 174.965] (II) xfree86: Adding drm device (/dev/dri/card0) [ 174.967] (--) PCI:*(0:0:2:0) 8086:1912:1028:06b9 rev 6, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64 [ 174.967] (II) LoadModule: "glx" [ 174.967] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 174.969] (II) Module glx: vendor="X.Org Foundation" [ 174.969] compiled for 1.18.3, module version = 1.0.0 [ 174.969] ABI class: X.Org Server Extension, version 9.0 [ 174.969] (==) AIGLX enabled [ 174.969] (==) Matched intel as autoconfigured driver 0 [ 174.969] (==) Matched intel as autoconfigured driver 1 [ 174.969] (==) Matched modesetting as autoconfigured driver 2 [ 174.969] (==) Matched fbdev as autoconfigured driver 3 [ 174.969] (==) Matched vesa as autoconfigured driver 4 [ 174.969] (==) Assigned the driver to the xf86ConfigLayout [ 174.969] (II) LoadModule: "intel" [ 174.970] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 174.970] (II) Module intel: vendor="X.Org Foundation" [ 174.970] compiled for 1.18.2, module version = 2.99.917 [ 174.970] Module class: X.Org Video Driver [ 174.970] ABI class: X.Org Video Driver, version 20.0 [ 174.970] (II) LoadModule: "modesetting" [ 174.970] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 174.970] (II) Module modesetting: vendor="X.Org Foundation" [ 174.970] compiled for 1.18.3, module version = 1.18.3 [ 174.970] Module class: X.Org Video Driver [ 174.970] ABI class: X.Org Video Driver, version 20.0 [ 174.970] (II) LoadModule: "fbdev" [ 174.971] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 174.971] (II) Module fbdev: vendor="X.Org Foundation" [ 174.971] compiled for 1.18.0, module version = 0.4.4 [ 174.971] Module class: X.Org Video Driver [ 174.971] ABI class: X.Org Video Driver, version 20.0 [ 174.971] (II) LoadModule: "vesa" [ 174.971] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 174.971] (II) Module vesa: vendor="X.Org Foundation" [ 174.971] compiled for 1.18.0, module version = 2.3.4 [ 174.971] Module class: X.Org Video Driver [ 174.971] ABI class: X.Org Video Driver, version 20.0 [ 174.971] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 174.972] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 174.972] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 174.972] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 174.972] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 174.972] (II) FBDEV: driver for framebuffer: fbdev [ 174.972] (II) VESA: driver for VESA chipsets: vesa [ 174.972] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010 [ 174.972] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1 (Timo Aaltonen <tjaalton@debian.org>) [ 174.972] (II) intel(0): SNA compiled for use with valgrind [ 174.972] (WW) Falling back to old probe method for modesetting [ 174.973] (WW) Falling back to old probe method for fbdev [ 174.973] (II) Loading sub module "fbdevhw" [ 174.973] (II) LoadModule: "fbdevhw" [ 174.973] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 174.973] (II) Module fbdevhw: vendor="X.Org Foundation" [ 174.973] compiled for 1.18.3, module version = 0.0.2 [ 174.973] ABI class: X.Org Video Driver, version 20.0 [ 174.973] (WW) Falling back to old probe method for vesa [ 174.973] (--) intel(0): gen9 engineering sample [ 174.973] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads [ 174.973] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 174.973] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 174.973] (==) intel(0): RGB weight 888 [ 174.973] (==) intel(0): Default visual is TrueColor [ 174.974] (II) intel(0): Output HDMI1 has no monitor section [ 174.974] (II) intel(0): Enabled output HDMI1 [ 174.974] (II) intel(0): Output DP1 has no monitor section [ 174.974] (II) intel(0): Enabled output DP1 [ 174.974] (II) intel(0): Output HDMI2 has no monitor section [ 174.974] (II) intel(0): Enabled output HDMI2 [ 174.974] (II) intel(0): Output DP2 has no monitor section [ 174.974] (II) intel(0): Enabled output DP2 [ 174.975] (II) intel(0): Output HDMI3 has no monitor section [ 174.975] (II) intel(0): Enabled output HDMI3 [ 174.975] (II) intel(0): Output DP3 has no monitor section [ 174.975] (II) intel(0): Enabled output DP3 [ 174.975] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 174.975] (II) intel(0): Output VIRTUAL1 has no monitor section [ 174.975] (II) intel(0): Enabled output VIRTUAL1 [ 174.975] (--) intel(0): Output HDMI1 using initial mode 1920x1200 on pipe 0 [ 174.975] (==) intel(0): TearFree disabled [ 174.975] (==) intel(0): DPI set to (96, 96) [ 174.975] (II) Loading sub module "dri2" [ 174.975] (II) LoadModule: "dri2" [ 174.975] (II) Module "dri2" already built-in [ 174.975] (II) Loading sub module "present" [ 174.975] (II) LoadModule: "present" [ 174.975] (II) Module "present" already built-in [ 174.975] (II) UnloadModule: "modesetting" [ 174.975] (II) Unloading modesetting [ 174.975] (II) UnloadModule: "fbdev" [ 174.975] (II) Unloading fbdev [ 174.975] (II) UnloadSubModule: "fbdevhw" [ 174.975] (II) Unloading fbdevhw [ 174.976] (II) UnloadModule: "vesa" [ 174.976] (II) Unloading vesa [ 174.976] (==) Depth 24 pixmap format is 32 bpp [ 174.976] (II) intel(0): SNA initialized with generic backend [ 174.976] (==) intel(0): Backing store enabled [ 174.976] (==) intel(0): Silken mouse enabled [ 174.976] (II) intel(0): HW Cursor enabled [ 174.976] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 174.976] (==) intel(0): DPMS enabled [ 174.976] (==) intel(0): Display hotplug detection enabled [ 174.976] (II) intel(0): Textured video not supported on this hardware or backend [ 174.976] (II) intel(0): [DRI2] Setup complete [ 174.976] (II) intel(0): [DRI2] DRI driver: i965 [ 174.977] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 174.977] (II) intel(0): direct rendering: DRI2 enabled [ 174.977] (II) intel(0): hardware support for Present enabled [ 174.977] (--) RandR disabled [ 174.985] (II) SELinux: Disabled on system [ 175.000] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 175.000] (II) AIGLX: enabled GLX_ARB_create_context [ 175.000] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 175.000] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 175.000] (II) AIGLX: enabled GLX_INTEL_swap_event [ 175.000] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 175.000] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 175.000] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 175.000] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 175.000] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 175.000] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 175.000] (II) AIGLX: Loaded and initialized i965 [ 175.000] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 175.004] (II) intel(0): switch to mode 1920x1200@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 175.004] (II) intel(0): Setting screen physical size to 508 x 317 [ 175.028] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 175.028] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 175.028] (II) LoadModule: "evdev" [ 175.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 175.028] (II) Module evdev: vendor="X.Org Foundation" [ 175.028] compiled for 1.18.0, module version = 2.10.1 [ 175.028] Module class: X.Org XInput Driver [ 175.028] ABI class: X.Org XInput driver, version 22.1 [ 175.028] (II) Using input driver 'evdev' for 'Power Button' [ 175.028] (**) Power Button: always reports core events [ 175.028] (**) evdev: Power Button: Device: "/dev/input/event5" [ 175.028] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 175.028] (--) evdev: Power Button: Found keys [ 175.028] (II) evdev: Power Button: Configuring as keyboard [ 175.028] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5" [ 175.028] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 175.028] (**) Option "xkb_rules" "evdev" [ 175.028] (**) Option "xkb_model" "pc105" [ 175.028] (**) Option "xkb_layout" "us" [ 175.028] (II) config/udev: Adding input device Video Bus (/dev/input/event8) [ 175.028] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 175.028] (II) Using input driver 'evdev' for 'Video Bus' [ 175.028] (**) Video Bus: always reports core events [ 175.028] (**) evdev: Video Bus: Device: "/dev/input/event8" [ 175.028] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 175.028] (--) evdev: Video Bus: Found keys [ 175.028] (II) evdev: Video Bus: Configuring as keyboard [ 175.028] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8" [ 175.028] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 175.028] (**) Option "xkb_rules" "evdev" [ 175.028] (**) Option "xkb_model" "pc105" [ 175.028] (**) Option "xkb_layout" "us" [ 175.029] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 175.029] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 175.029] (II) Using input driver 'evdev' for 'Power Button' [ 175.029] (**) Power Button: always reports core events [ 175.029] (**) evdev: Power Button: Device: "/dev/input/event4" [ 175.029] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 175.029] (--) evdev: Power Button: Found keys [ 175.029] (II) evdev: Power Button: Configuring as keyboard [ 175.029] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4" [ 175.029] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 175.029] (**) Option "xkb_rules" "evdev" [ 175.029] (**) Option "xkb_model" "pc105" [ 175.029] (**) Option "xkb_layout" "us" [ 175.029] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 175.029] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 175.029] (II) Using input driver 'evdev' for 'Sleep Button' [ 175.029] (**) Sleep Button: always reports core events [ 175.029] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 175.029] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 175.029] (--) evdev: Sleep Button: Found keys [ 175.029] (II) evdev: Sleep Button: Configuring as keyboard [ 175.029] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event3" [ 175.029] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 175.029] (**) Option "xkb_rules" "evdev" [ 175.029] (**) Option "xkb_model" "pc105" [ 175.029] (**) Option "xkb_layout" "us" [ 175.030] (II) config/udev: Adding input device Dell KB216 Wired Keyboard (/dev/input/event0) [ 175.030] (**) Dell KB216 Wired Keyboard: Applying InputClass "evdev keyboard catchall" [ 175.030] (II) Using input driver 'evdev' for 'Dell KB216 Wired Keyboard' [ 175.030] (**) Dell KB216 Wired Keyboard: always reports core events [ 175.030] (**) evdev: Dell KB216 Wired Keyboard: Device: "/dev/input/event0" [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Vendor 0x413c Product 0x2113 [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Found keys [ 175.030] (II) evdev: Dell KB216 Wired Keyboard: Configuring as keyboard [ 175.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:413C:2113.0001/input/input3/event0" [ 175.030] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard" (type: KEYBOARD, id 10) [ 175.030] (**) Option "xkb_rules" "evdev" [ 175.030] (**) Option "xkb_model" "pc105" [ 175.030] (**) Option "xkb_layout" "us" [ 175.030] (II) config/udev: Adding input device Dell KB216 Wired Keyboard (/dev/input/event1) [ 175.030] (**) Dell KB216 Wired Keyboard: Applying InputClass "evdev keyboard catchall" [ 175.030] (II) Using input driver 'evdev' for 'Dell KB216 Wired Keyboard' [ 175.030] (**) Dell KB216 Wired Keyboard: always reports core events [ 175.030] (**) evdev: Dell KB216 Wired Keyboard: Device: "/dev/input/event1" [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Vendor 0x413c Product 0x2113 [ 175.030] (--) evdev: Dell KB216 Wired Keyboard: Found keys [ 175.030] (II) evdev: Dell KB216 Wired Keyboard: Configuring as keyboard [ 175.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:413C:2113.0002/input/input4/event1" [ 175.030] (II) XINPUT: Adding extended input device "Dell KB216 Wired Keyboard" (type: KEYBOARD, id 11) [ 175.030] (**) Option "xkb_rules" "evdev" [ 175.030] (**) Option "xkb_model" "pc105" [ 175.030] (**) Option "xkb_layout" "us" [ 175.031] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/event2) [ 175.031] (**) PixArt Dell MS116 USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 175.031] (II) Using input driver 'evdev' for 'PixArt Dell MS116 USB Optical Mouse' [ 175.031] (**) PixArt Dell MS116 USB Optical Mouse: always reports core events [ 175.031] (**) evdev: PixArt Dell MS116 USB Optical Mouse: Device: "/dev/input/event2" [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Vendor 0x413c Product 0x301a [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found 12 mouse buttons [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found scroll wheel(s) [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found relative axes [ 175.084] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found x and y relative axes [ 175.084] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Configuring as mouse [ 175.084] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Adding scrollwheel support [ 175.084] (**) evdev: PixArt Dell MS116 USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 175.084] (**) evdev: PixArt Dell MS116 USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 175.084] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0003/input/input5/event2" [ 175.084] (II) XINPUT: Adding extended input device "PixArt Dell MS116 USB Optical Mouse" (type: MOUSE, id 12) [ 175.084] (II) evdev: PixArt Dell MS116 USB Optical Mouse: initialized for relative axes. [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration profile 0 [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration factor: 2.000 [ 175.084] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration threshold: 4 [ 175.084] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/mouse0) [ 175.084] (II) No input driver specified, ignoring this device. [ 175.084] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event10) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event11) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.085] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12) [ 175.085] (II) No input driver specified, ignoring this device. [ 175.085] (II) This device may have been added with another device file. [ 175.086] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13) [ 175.086] (II) No input driver specified, ignoring this device. [ 175.086] (II) This device may have been added with another device file. [ 175.086] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14) [ 175.086] (II) No input driver specified, ignoring this device. [ 175.086] (II) This device may have been added with another device file. [ 175.086] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 175.086] (II) No input driver specified, ignoring this device. [ 175.086] (II) This device may have been added with another device file. [ 175.087] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7) [ 175.087] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 175.087] (II) Using input driver 'evdev' for 'Dell WMI hotkeys' [ 175.087] (**) Dell WMI hotkeys: always reports core events [ 175.087] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7" [ 175.087] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0 [ 175.087] (--) evdev: Dell WMI hotkeys: Found keys [ 175.087] (II) evdev: Dell WMI hotkeys: Configuring as keyboard [ 175.087] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event7" [ 175.087] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13) [ 175.087] (**) Option "xkb_rules" "evdev" [ 175.087] (**) Option "xkb_model" "pc105" [ 175.087] (**) Option "xkb_layout" "us" [ 177.624] (II) AIGLX: Suspending AIGLX clients for VT switch [ 194.176] (II) AIGLX: Resuming AIGLX clients after VT switch [ 194.177] (II) intel(0): switch to mode 1920x1200@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 52745.098] (II) intel(0): EDID vendor "DEL", prod id 41004 [ 52745.098] (II) intel(0): Using EDID range info for horizontal sync [ 52745.098] (II) intel(0): Using EDID range info for vertical refresh [ 52745.098] (II) intel(0): Printing DDC gathered Modelines: [ 52745.098] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 52745.098] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 52745.098] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 52745.098] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 52745.098] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 52745.098] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 52745.098] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 52745.098] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 52745.098] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 52745.098] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 52745.098] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 52745.098] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 52745.098] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 52745.098] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 52745.099] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 52745.099] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 52745.099] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 52745.099] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e) [ 52745.099] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e) [ 52745.099] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e) [ 53011.940] (II) AIGLX: Suspending AIGLX clients for VT switch [ 53071.927] (II) config/udev: removing device PixArt Dell MS116 USB Optical Mouse [ 53071.929] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Close [ 53071.930] (II) UnloadModule: "evdev" [ 53073.634] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/mouse0) [ 53073.634] (II) No input driver specified, ignoring this device. [ 53073.634] (II) This device may have been added with another device file. [ 53073.715] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/event2) [ 53073.715] (**) PixArt Dell MS116 USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 53073.715] (II) Using input driver 'evdev' for 'PixArt Dell MS116 USB Optical Mouse' [ 53073.715] (**) PixArt Dell MS116 USB Optical Mouse: always reports core events [ 53073.715] (**) evdev: PixArt Dell MS116 USB Optical Mouse: Device: "/dev/input/event2" [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Vendor 0x413c Product 0x301a [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found 12 mouse buttons [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found scroll wheel(s) [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found relative axes [ 53073.715] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found x and y relative axes [ 53073.715] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Configuring as mouse [ 53073.715] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Adding scrollwheel support [ 53073.715] (**) evdev: PixArt Dell MS116 USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 53073.715] (**) evdev: PixArt Dell MS116 USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 53073.715] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0004/input/input18/event2" [ 53073.716] (II) XINPUT: Adding extended input device "PixArt Dell MS116 USB Optical Mouse" (type: MOUSE, id 12) [ 53073.716] (II) evdev: PixArt Dell MS116 USB Optical Mouse: initialized for relative axes. [ 53073.716] (**) PixArt Dell MS116 USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 53073.717] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration profile 0 [ 53073.717] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration factor: 2.000 [ 53073.717] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration threshold: 4 [ 53676.836] (II) AIGLX: Resuming AIGLX clients after VT switch [ 53676.836] (EE) intel(0): sna_mode_shutdown_crtc: invalid state found on pipe 0, disabling CRTC:21 [ 53703.920] (II) AIGLX: Suspending AIGLX clients for VT switch [ 53763.915] (II) config/udev: removing device PixArt Dell MS116 USB Optical Mouse [ 53763.917] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Close [ 53763.917] (II) UnloadModule: "evdev" [ 53765.625] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/mouse0) [ 53765.625] (II) No input driver specified, ignoring this device. [ 53765.625] (II) This device may have been added with another device file. [ 53765.719] (II) config/udev: Adding input device PixArt Dell MS116 USB Optical Mouse (/dev/input/event2) [ 53765.719] (**) PixArt Dell MS116 USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 53765.719] (II) Using input driver 'evdev' for 'PixArt Dell MS116 USB Optical Mouse' [ 53765.719] (**) PixArt Dell MS116 USB Optical Mouse: always reports core events [ 53765.719] (**) evdev: PixArt Dell MS116 USB Optical Mouse: Device: "/dev/input/event2" [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Vendor 0x413c Product 0x301a [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found 12 mouse buttons [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found scroll wheel(s) [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found relative axes [ 53765.772] (--) evdev: PixArt Dell MS116 USB Optical Mouse: Found x and y relative axes [ 53765.772] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Configuring as mouse [ 53765.772] (II) evdev: PixArt Dell MS116 USB Optical Mouse: Adding scrollwheel support [ 53765.772] (**) evdev: PixArt Dell MS116 USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 53765.772] (**) evdev: PixArt Dell MS116 USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 53765.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:301A.0005/input/input19/event2" [ 53765.772] (II) XINPUT: Adding extended input device "PixArt Dell MS116 USB Optical Mouse" (type: MOUSE, id 12) [ 53765.772] (II) evdev: PixArt Dell MS116 USB Optical Mouse: initialized for relative axes. [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration profile 0 [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration factor: 2.000 [ 53765.773] (**) PixArt Dell MS116 USB Optical Mouse: (accel) acceleration threshold: 4