--- Begin Message ---
Package: xserver-xorg-core
Version: 2:1.18.2-1
Severity: important
Dear Maintainer,
The problem:
login from SDDM, and Xorg went to definite loop after a while
I didn't install any xserver-xorg-video-*.
Backtrace attached.
Thanks
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160224 (Debian 5.3.1-10) ) #1 SMP Debian 4.4.4-2 (2016-03-09)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 26684 Oct 7 23:59 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 59460 Mar 14 21:02 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 4.347] (--) Log file renamed from "/var/log/Xorg.pid-769.log" to "/var/log/Xorg.0.log"
[ 4.348]
X.Org X Server 1.18.2
Release Date: 2016-03-11
[ 4.348] X Protocol Version 11, Revision 0
[ 4.348] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 4.348] Current Operating System: Linux XPS 4.4.0-1-amd64 #1 SMP Debian 4.4.4-2 (2016-03-09) x86_64
[ 4.348] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-1-amd64 root=UUID=7255d155-fea2-42e5-9786-5e7285794cca ro quiet splash
[ 4.348] Build Date: 12 March 2016 07:32:38AM
[ 4.348] xorg-server 2:1.18.2-1 (http://www.debian.org/support)
[ 4.348] Current version of pixman: 0.33.6
[ 4.348] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.348] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.348] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 14 20:43:26 2016
[ 4.348] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.349] (==) No Layout section. Using the first Screen section.
[ 4.349] (==) No screen section available. Using defaults.
[ 4.349] (**) |-->Screen "Default Screen Section" (0)
[ 4.349] (**) | |-->Monitor "<default monitor>"
[ 4.349] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.349] (==) Automatically adding devices
[ 4.349] (==) Automatically enabling devices
[ 4.349] (==) Automatically adding GPU devices
[ 4.349] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 4.351] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.351] Entry deleted from font path.
[ 4.351] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.351] Entry deleted from font path.
[ 4.351] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.351] Entry deleted from font path.
[ 4.351] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 4.351] Entry deleted from font path.
[ 4.351] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.351] Entry deleted from font path.
[ 4.351] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.351] Entry deleted from font path.
[ 4.351] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 4.351] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.351] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.351] (II) Loader magic: 0x55f46e987dc0
[ 4.351] (II) Module ABI versions:
[ 4.351] X.Org ANSI C Emulation: 0.4
[ 4.351] X.Org Video Driver: 20.0
[ 4.351] X.Org XInput driver : 22.1
[ 4.351] X.Org Server Extension : 9.0
[ 4.351] (++) using VT number 7
[ 4.351] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 4.352] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.353] (--) PCI:*(0:0:2:0) 8086:1616:1028:0665 rev 9, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 4.353] (II) LoadModule: "glx"
[ 4.354] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.363] (II) Module glx: vendor="X.Org Foundation"
[ 4.363] compiled for 1.18.2, module version = 1.0.0
[ 4.363] ABI class: X.Org Server Extension, version 9.0
[ 4.363] (==) AIGLX enabled
[ 4.363] (==) Matched intel as autoconfigured driver 0
[ 4.363] (==) Matched intel as autoconfigured driver 1
[ 4.363] (==) Matched modesetting as autoconfigured driver 2
[ 4.363] (==) Matched fbdev as autoconfigured driver 3
[ 4.363] (==) Matched vesa as autoconfigured driver 4
[ 4.363] (==) Assigned the driver to the xf86ConfigLayout
[ 4.363] (II) LoadModule: "intel"
[ 4.364] (WW) Warning, couldn't open module intel
[ 4.364] (II) UnloadModule: "intel"
[ 4.364] (II) Unloading intel
[ 4.364] (EE) Failed to load module "intel" (module does not exist, 0)
[ 4.364] (II) LoadModule: "modesetting"
[ 4.364] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4.364] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.364] compiled for 1.18.2, module version = 1.18.2
[ 4.364] Module class: X.Org Video Driver
[ 4.365] ABI class: X.Org Video Driver, version 20.0
[ 4.365] (II) LoadModule: "fbdev"
[ 4.365] (WW) Warning, couldn't open module fbdev
[ 4.365] (II) UnloadModule: "fbdev"
[ 4.365] (II) Unloading fbdev
[ 4.365] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.365] (II) LoadModule: "vesa"
[ 4.365] (WW) Warning, couldn't open module vesa
[ 4.365] (II) UnloadModule: "vesa"
[ 4.365] (II) Unloading vesa
[ 4.365] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.365] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.369] (II) modeset(0): using drv /dev/dri/card0
[ 4.369] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.369] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 4.369] (==) modeset(0): RGB weight 888
[ 4.369] (==) modeset(0): Default visual is TrueColor
[ 4.369] (II) Loading sub module "glamoregl"
[ 4.369] (II) LoadModule: "glamoregl"
[ 4.369] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 4.381] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.381] compiled for 1.18.2, module version = 1.0.0
[ 4.381] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.381] (II) glamor: OpenGL accelerated X.org driver based.
[ 4.406] (II) glamor: EGL version 1.4 (DRI2):
[ 4.415] (II) modeset(0): glamor initialized
[ 4.415] (II) modeset(0): Output eDP-1 has no monitor section
[ 4.415] (II) modeset(0): Output DP-1 has no monitor section
[ 4.544] (II) modeset(0): Output HDMI-1 has no monitor section
[ 4.544] (II) modeset(0): EDID for output eDP-1
[ 4.544] (II) modeset(0): Manufacturer: SHP Model: 1420 Serial#: 0
[ 4.544] (II) modeset(0): Year: 2015 Week: 2
[ 4.544] (II) modeset(0): EDID Version: 1.4
[ 4.544] (II) modeset(0): Digital Display Input
[ 4.544] (II) modeset(0): 8 bits per channel
[ 4.544] (II) modeset(0): Digital interface is DisplayPort
[ 4.544] (II) modeset(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 4.544] (II) modeset(0): Gamma: 2.20
[ 4.544] (II) modeset(0): No DPMS capabilities specified
[ 4.544] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4.544] (II) modeset(0): Default color space is primary color space
[ 4.544] (II) modeset(0): First detailed timing is preferred mode
[ 4.544] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 4.544] (II) modeset(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 4.544] (II) modeset(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 4.544] (II) modeset(0): Manufacturer's mask: 0
[ 4.544] (II) modeset(0): Supported detailed timing:
[ 4.544] (II) modeset(0): clock: 138.5 MHz Image Size: 294 x 165 mm
[ 4.544] (II) modeset(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 4.544] (II) modeset(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 4.544] (II) modeset(0): V4FJ4�LQ133M1
[ 4.544] (II) modeset(0): Unknown vendor-specific block 0
[ 4.544] (II) modeset(0): EDID (in hex):
[ 4.544] (II) modeset(0): 00ffffffffffff004d10201400000000
[ 4.544] (II) modeset(0): 02190104a51d11780ede50a3544c9926
[ 4.544] (II) modeset(0): 0f505400000001010101010101010101
[ 4.544] (II) modeset(0): 0101010101011a3680a070381f403020
[ 4.544] (II) modeset(0): 350026a5100000180000001000000000
[ 4.544] (II) modeset(0): 00000000000000000000000000fe0056
[ 4.544] (II) modeset(0): 34464a34814c513133334d3100000000
[ 4.544] (II) modeset(0): 0002410328001200000b010a202000b5
[ 4.544] (II) modeset(0): Printing probed modes for output eDP-1
[ 4.544] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 4.544] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 4.544] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 4.544] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 4.544] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 4.544] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 4.544] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 4.544] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 4.544] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 4.544] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 4.544] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 4.544] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 4.544] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 4.544] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 4.544] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 4.544] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 4.544] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 4.544] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 4.544] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 4.545] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4.545] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4.545] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 4.545] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 4.545] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 4.545] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 4.545] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 4.545] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 4.545] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 4.545] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4.545] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 4.545] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 4.545] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 4.545] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 4.545] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 4.545] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 4.545] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 4.545] (II) modeset(0): EDID for output DP-1
[ 4.672] (II) modeset(0): EDID for output HDMI-1
[ 4.672] (II) modeset(0): Output eDP-1 connected
[ 4.672] (II) modeset(0): Output DP-1 disconnected
[ 4.672] (II) modeset(0): Output HDMI-1 disconnected
[ 4.672] (II) modeset(0): Using exact sizes for initial modes
[ 4.672] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 4.672] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4.672] (==) modeset(0): DPI set to (96, 96)
[ 4.672] (II) Loading sub module "fb"
[ 4.672] (II) LoadModule: "fb"
[ 4.672] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4.674] (II) Module fb: vendor="X.Org Foundation"
[ 4.674] compiled for 1.18.2, module version = 1.0.0
[ 4.674] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.674] (==) Depth 24 pixmap format is 32 bpp
[ 4.743] (==) modeset(0): Backing store enabled
[ 4.743] (==) modeset(0): Silken mouse enabled
[ 4.744] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4.744] (==) modeset(0): DPMS enabled
[ 4.745] (II) modeset(0): [DRI2] Setup complete
[ 4.745] (II) modeset(0): [DRI2] DRI driver: i965
[ 4.745] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 4.754] (--) RandR disabled
[ 4.758] (II) SELinux: Disabled on system
[ 4.762] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4.762] (II) AIGLX: enabled GLX_ARB_create_context
[ 4.762] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4.762] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 4.762] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4.762] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4.762] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 4.762] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 4.762] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 4.762] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4.762] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 4.762] (II) AIGLX: Loaded and initialized i965
[ 4.762] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.763] (II) modeset(0): Damage tracking initialized
[ 4.763] (II) modeset(0): Setting screen physical size to 508 x 285
[ 4.812] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4.812] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.812] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.812] (II) LoadModule: "libinput"
[ 4.812] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4.816] (II) Module libinput: vendor="X.Org Foundation"
[ 4.816] compiled for 1.18.1, module version = 0.17.0
[ 4.816] Module class: X.Org XInput Driver
[ 4.816] ABI class: X.Org XInput driver, version 22.1
[ 4.816] (II) Using input driver 'libinput' for 'Power Button'
[ 4.816] (**) Power Button: always reports core events
[ 4.816] (**) Option "Device" "/dev/input/event4"
[ 4.816] (**) Option "_source" "server/udev"
[ 4.816] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 4.816] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 4.836] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 4.836] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.836] (**) Option "xkb_model" "pc105"
[ 4.836] (**) Option "xkb_layout" "us"
[ 4.836] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 4.836] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 4.837] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4.837] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.837] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 4.837] (II) Using input driver 'libinput' for 'Video Bus'
[ 4.837] (**) Video Bus: always reports core events
[ 4.837] (**) Option "Device" "/dev/input/event5"
[ 4.837] (**) Option "_source" "server/udev"
[ 4.837] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[ 4.837] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[ 4.848] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[ 4.848] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.848] (**) Option "xkb_model" "pc105"
[ 4.848] (**) Option "xkb_layout" "us"
[ 4.848] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[ 4.848] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[ 4.848] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4.848] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.848] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4.848] (II) Using input driver 'libinput' for 'Power Button'
[ 4.848] (**) Power Button: always reports core events
[ 4.848] (**) Option "Device" "/dev/input/event2"
[ 4.848] (**) Option "_source" "server/udev"
[ 4.849] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4.849] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 4.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 4.860] (**) Option "xkb_model" "pc105"
[ 4.860] (**) Option "xkb_layout" "us"
[ 4.860] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4.860] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4.860] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4.860] (II) No input driver specified, ignoring this device.
[ 4.860] (II) This device may have been added with another device file.
[ 4.861] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 4.861] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.861] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 4.861] (II) Using input driver 'libinput' for 'Sleep Button'
[ 4.861] (**) Sleep Button: always reports core events
[ 4.861] (**) Option "Device" "/dev/input/event3"
[ 4.861] (**) Option "_source" "server/udev"
[ 4.861] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 4.861] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 4.872] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[ 4.872] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 4.872] (**) Option "xkb_model" "pc105"
[ 4.872] (**) Option "xkb_layout" "us"
[ 4.872] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 4.872] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 4.873] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 4.873] (II) No input driver specified, ignoring this device.
[ 4.873] (II) This device may have been added with another device file.
[ 4.873] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 4.873] (II) No input driver specified, ignoring this device.
[ 4.873] (II) This device may have been added with another device file.
[ 4.873] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 4.873] (II) No input driver specified, ignoring this device.
[ 4.873] (II) This device may have been added with another device file.
[ 4.873] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 4.873] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 4.873] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 4.873] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 4.873] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 4.873] (**) Option "Device" "/dev/input/event6"
[ 4.873] (**) Option "_source" "server/udev"
[ 4.928] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 4.928] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 4.952] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0001/input/input8/event6"
[ 4.952] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 4.952] (**) Option "AccelerationScheme" "none"
[ 4.952] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 4.952] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 4.952] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 5.008] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 5.008] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 5.008] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 5.008] (II) No input driver specified, ignoring this device.
[ 5.008] (II) This device may have been added with another device file.
[ 5.009] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event15)
[ 5.009] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 5.009] (**) Integrated_Webcam_HD: Applying InputClass "libinput keyboard catchall"
[ 5.009] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD'
[ 5.009] (**) Integrated_Webcam_HD: always reports core events
[ 5.009] (**) Option "Device" "/dev/input/event15"
[ 5.009] (**) Option "_source" "server/udev"
[ 5.009] (II) input device 'Integrated_Webcam_HD', /dev/input/event15 is tagged by udev as: Keyboard
[ 5.009] (II) input device 'Integrated_Webcam_HD', /dev/input/event15 is a keyboard
[ 5.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16/event15"
[ 5.036] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 11)
[ 5.036] (**) Option "xkb_model" "pc105"
[ 5.036] (**) Option "xkb_layout" "us"
[ 5.036] (II) input device 'Integrated_Webcam_HD', /dev/input/event15 is tagged by udev as: Keyboard
[ 5.036] (II) input device 'Integrated_Webcam_HD', /dev/input/event15 is a keyboard
[ 5.036] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 5.036] (II) No input driver specified, ignoring this device.
[ 5.036] (II) This device may have been added with another device file.
[ 5.037] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event13)
[ 5.037] (II) No input driver specified, ignoring this device.
[ 5.037] (II) This device may have been added with another device file.
[ 5.037] (II) config/udev: Adding input device DLL0665:01 06CB:76AD Touchpad (/dev/input/event16)
[ 5.037] (**) DLL0665:01 06CB:76AD Touchpad: Applying InputClass "evdev touchpad catchall"
[ 5.037] (**) DLL0665:01 06CB:76AD Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 5.037] (**) DLL0665:01 06CB:76AD Touchpad: Applying InputClass "libinput touchpad catchall"
[ 5.037] (**) DLL0665:01 06CB:76AD Touchpad: Applying InputClass "libinput touchscreen catchall"
[ 5.037] (II) Using input driver 'libinput' for 'DLL0665:01 06CB:76AD Touchpad'
[ 5.037] (**) DLL0665:01 06CB:76AD Touchpad: always reports core events
[ 5.037] (**) Option "Device" "/dev/input/event16"
[ 5.037] (**) Option "_source" "server/udev"
[ 5.038] (II) input device 'DLL0665:01 06CB:76AD Touchpad', /dev/input/event16 is tagged by udev as: Touchpad Touchscreen
[ 5.038] (II) input device 'DLL0665:01 06CB:76AD Touchpad', /dev/input/event16 is a touchpad
[ 5.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input17/event16"
[ 5.056] (II) XINPUT: Adding extended input device "DLL0665:01 06CB:76AD Touchpad" (type: TOUCHPAD, id 12)
[ 5.056] (**) Option "AccelerationScheme" "none"
[ 5.056] (**) DLL0665:01 06CB:76AD Touchpad: (accel) selected scheme none/0
[ 5.056] (**) DLL0665:01 06CB:76AD Touchpad: (accel) acceleration factor: 2.000
[ 5.056] (**) DLL0665:01 06CB:76AD Touchpad: (accel) acceleration threshold: 4
[ 5.057] (II) input device 'DLL0665:01 06CB:76AD Touchpad', /dev/input/event16 is tagged by udev as: Touchpad Touchscreen
[ 5.057] (II) input device 'DLL0665:01 06CB:76AD Touchpad', /dev/input/event16 is a touchpad
[ 5.058] (II) config/udev: Adding input device DLL0665:01 06CB:76AD Touchpad (/dev/input/mouse2)
[ 5.058] (II) No input driver specified, ignoring this device.
[ 5.058] (II) This device may have been added with another device file.
[ 5.058] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 5.058] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.058] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 5.058] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 5.058] (**) AT Translated Set 2 keyboard: always reports core events
[ 5.058] (**) Option "Device" "/dev/input/event0"
[ 5.058] (**) Option "_source" "server/udev"
[ 5.058] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 5.058] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 5.084] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 5.084] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 5.084] (**) Option "xkb_model" "pc105"
[ 5.084] (**) Option "xkb_layout" "us"
[ 5.084] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 5.084] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 5.084] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 5.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 5.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 5.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 5.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall"
[ 5.084] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 5.084] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5.084] (**) Option "Device" "/dev/input/event7"
[ 5.084] (**) Option "_source" "server/udev"
[ 5.085] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is tagged by udev as: Touchpad Touchscreen
[ 5.085] (II) SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 5.085] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is a touchpad
[ 5.108] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[ 5.108] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 5.108] (**) Option "AccelerationScheme" "none"
[ 5.108] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 5.108] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 5.108] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 5.108] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is tagged by udev as: Touchpad Touchscreen
[ 5.108] (II) SynPS/2 Synaptics TouchPad: no resolution or size hints, assuming a size of 69x50mm
[ 5.108] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is a touchpad
[ 5.108] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 5.108] (II) No input driver specified, ignoring this device.
[ 5.108] (II) This device may have been added with another device file.
[ 5.108] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 5.108] (II) No input driver specified, ignoring this device.
[ 5.108] (II) This device may have been added with another device file.
[ 5.109] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event14)
[ 5.109] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 5.109] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5.109] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 5.109] (**) Dell WMI hotkeys: always reports core events
[ 5.109] (**) Option "Device" "/dev/input/event14"
[ 5.109] (**) Option "_source" "server/udev"
[ 5.109] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is tagged by udev as: Keyboard
[ 5.109] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is a keyboard
[ 5.120] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event14"
[ 5.120] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[ 5.120] (**) Option "xkb_model" "pc105"
[ 5.120] (**) Option "xkb_layout" "us"
[ 5.120] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is tagged by udev as: Keyboard
[ 5.120] (II) input device 'Dell WMI hotkeys', /dev/input/event14 is a keyboard
[ 15.416] (II) modeset(0): EDID vendor "SHP", prod id 5152
[ 15.416] (II) modeset(0): Printing DDC gathered Modelines:
[ 15.416] (II) modeset(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 16.002] (II) modeset(0): EDID vendor "SHP", prod id 5152
[ 16.002] (II) modeset(0): Printing DDC gathered Modelines:
[ 16.002] (II) modeset(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 46.516] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 46.527] (II) input device 'DLL0665:01 06CB:76AD Touchpad', /dev/input/event16 is tagged by udev as: Touchpad Touchscreen
[ 46.527] (II) input device 'DLL0665:01 06CB:76AD Touchpad', /dev/input/event16 is a touchpad
[ 106.413] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 106.413] (II) UnloadModule: "libinput"
[ 108.051] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 108.051] (II) No input driver specified, ignoring this device.
[ 108.051] (II) This device may have been added with another device file.
[ 108.173] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 108.173] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 108.173] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 108.173] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 108.173] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 108.173] (**) Option "Device" "/dev/input/event6"
[ 108.173] (**) Option "_source" "server/udev"
[ 108.228] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 108.228] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 108.252] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0003/input/input19/event6"
[ 108.252] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 108.252] (**) Option "AccelerationScheme" "none"
[ 108.252] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 108.252] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 108.252] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 168.213] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 168.213] (II) UnloadModule: "libinput"
[ 169.830] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 169.831] (II) No input driver specified, ignoring this device.
[ 169.831] (II) This device may have been added with another device file.
[ 169.973] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 169.973] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 169.973] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 169.973] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 169.973] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 169.973] (**) Option "Device" "/dev/input/event6"
[ 169.973] (**) Option "_source" "server/udev"
[ 170.028] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 170.028] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 170.052] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0004/input/input20/event6"
[ 170.052] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 170.052] (**) Option "AccelerationScheme" "none"
[ 170.052] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 170.052] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 170.052] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 230.009] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 230.009] (II) UnloadModule: "libinput"
[ 231.638] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 231.638] (II) No input driver specified, ignoring this device.
[ 231.638] (II) This device may have been added with another device file.
[ 231.825] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 231.825] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 231.825] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 231.825] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 231.825] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 231.825] (**) Option "Device" "/dev/input/event6"
[ 231.825] (**) Option "_source" "server/udev"
[ 231.880] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 231.880] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 231.908] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0005/input/input21/event6"
[ 231.908] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 231.908] (**) Option "AccelerationScheme" "none"
[ 231.908] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 231.908] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 231.908] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 261.078] [dix] EventToCore: Not implemented yet
[ 292.009] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 292.009] (II) UnloadModule: "libinput"
[ 293.689] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 293.689] (II) No input driver specified, ignoring this device.
[ 293.689] (II) This device may have been added with another device file.
[ 293.813] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 293.813] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 293.813] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 293.813] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 293.813] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 293.813] (**) Option "Device" "/dev/input/event6"
[ 293.813] (**) Option "_source" "server/udev"
[ 293.868] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 293.868] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 293.892] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0006/input/input22/event6"
[ 293.892] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 293.892] (**) Option "AccelerationScheme" "none"
[ 293.892] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 293.892] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 293.892] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 353.945] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 353.945] (II) UnloadModule: "libinput"
[ 355.572] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 355.572] (II) No input driver specified, ignoring this device.
[ 355.572] (II) This device may have been added with another device file.
[ 355.761] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 355.761] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 355.761] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 355.761] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 355.761] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 355.761] (**) Option "Device" "/dev/input/event6"
[ 355.761] (**) Option "_source" "server/udev"
[ 355.816] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 355.816] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 355.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0007/input/input23/event6"
[ 355.844] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 355.844] (**) Option "AccelerationScheme" "none"
[ 355.844] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 355.844] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 355.844] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 415.837] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 415.837] (II) UnloadModule: "libinput"
[ 417.477] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 417.477] (II) No input driver specified, ignoring this device.
[ 417.477] (II) This device may have been added with another device file.
[ 417.617] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 417.617] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 417.617] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 417.617] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 417.617] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 417.617] (**) Option "Device" "/dev/input/event6"
[ 417.617] (**) Option "_source" "server/udev"
[ 417.672] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 417.672] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 417.696] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0008/input/input24/event6"
[ 417.696] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 417.696] (**) Option "AccelerationScheme" "none"
[ 417.696] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 417.696] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 417.696] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 477.701] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 477.701] (II) UnloadModule: "libinput"
[ 479.345] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 479.345] (II) No input driver specified, ignoring this device.
[ 479.345] (II) This device may have been added with another device file.
[ 479.465] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 479.465] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 479.465] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 479.465] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 479.465] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 479.465] (**) Option "Device" "/dev/input/event6"
[ 479.465] (**) Option "_source" "server/udev"
[ 479.520] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 479.520] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 479.544] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0009/input/input25/event6"
[ 479.544] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 479.544] (**) Option "AccelerationScheme" "none"
[ 479.544] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 479.544] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 479.544] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 720.736] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 720.736] (II) UnloadModule: "libinput"
[ 721.655] (II) config/udev: Adding input device (unnamed) (/dev/input/mouse0)
[ 721.655] (II) No input driver specified, ignoring this device.
[ 721.655] (II) This device may have been added with another device file.
[ 721.928] (II) config/udev: Adding input device (unnamed) (/dev/input/event6)
[ 721.928] (**) (unnamed): Applying InputClass "evdev pointer catchall"
[ 721.928] (**) (unnamed): Applying InputClass "libinput pointer catchall"
[ 721.928] (II) Using input driver 'libinput' for '(unnamed)'
[ 721.928] (**) (unnamed): always reports core events
[ 721.928] (**) Option "Device" "/dev/input/event6"
[ 721.928] (**) Option "_source" "server/udev"
[ 721.984] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 721.984] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 722.008] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.000A/input/input26/event6"
[ 722.008] (II) XINPUT: Adding extended input device "(unnamed)" (type: MOUSE, id 10)
[ 722.008] (**) Option "AccelerationScheme" "none"
[ 722.008] (**) (unnamed): (accel) selected scheme none/0
[ 722.008] (**) (unnamed): (accel) acceleration factor: 2.000
[ 722.008] (**) (unnamed): (accel) acceleration threshold: 4
[ 722.569] (II) config/udev: removing device (unnamed)
[ 722.569] (II) UnloadModule: "libinput"
[ 723.439] (II) config/udev: Adding input device (unnamed) (/dev/input/mouse0)
[ 723.439] (II) No input driver specified, ignoring this device.
[ 723.439] (II) This device may have been added with another device file.
[ 723.714] (II) config/udev: Adding input device (unnamed) (/dev/input/event6)
[ 723.714] (**) (unnamed): Applying InputClass "evdev pointer catchall"
[ 723.714] (**) (unnamed): Applying InputClass "libinput pointer catchall"
[ 723.714] (II) Using input driver 'libinput' for '(unnamed)'
[ 723.714] (**) (unnamed): always reports core events
[ 723.714] (**) Option "Device" "/dev/input/event6"
[ 723.714] (**) Option "_source" "server/udev"
[ 723.768] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 723.768] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 723.796] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.000B/input/input27/event6"
[ 723.796] (II) XINPUT: Adding extended input device "(unnamed)" (type: MOUSE, id 10)
[ 723.796] (**) Option "AccelerationScheme" "none"
[ 723.796] (**) (unnamed): (accel) selected scheme none/0
[ 723.796] (**) (unnamed): (accel) acceleration factor: 2.000
[ 723.796] (**) (unnamed): (accel) acceleration threshold: 4
[ 724.364] (II) config/udev: removing device (unnamed)
[ 724.365] (II) UnloadModule: "libinput"
[ 725.587] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 725.587] (II) No input driver specified, ignoring this device.
[ 725.587] (II) This device may have been added with another device file.
[ 725.887] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 725.887] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 725.887] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 725.887] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 725.887] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 725.887] (**) Option "Device" "/dev/input/event6"
[ 725.887] (**) Option "_source" "server/udev"
[ 725.940] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 725.940] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 725.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.000C/input/input28/event6"
[ 725.968] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 725.968] (**) Option "AccelerationScheme" "none"
[ 725.968] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 725.968] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 725.968] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 908.158] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 908.158] (II) UnloadModule: "libinput"
[ 908.159] (II) config/udev: Adding input device (unnamed) (/dev/input/mouse0)
[ 908.159] (II) No input driver specified, ignoring this device.
[ 908.159] (II) This device may have been added with another device file.
[ 908.160] (II) config/udev: Adding input device (unnamed) (/dev/input/event6)
[ 908.160] (**) (unnamed): Applying InputClass "evdev pointer catchall"
[ 908.160] (**) (unnamed): Applying InputClass "libinput pointer catchall"
[ 908.160] (II) Using input driver 'libinput' for '(unnamed)'
[ 908.160] (**) (unnamed): always reports core events
[ 908.160] (**) Option "Device" "/dev/input/event6"
[ 908.160] (**) Option "_source" "server/udev"
[ 908.216] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 908.216] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 908.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.000D/input/input29/event6"
[ 908.240] (II) XINPUT: Adding extended input device "(unnamed)" (type: MOUSE, id 10)
[ 908.240] (**) Option "AccelerationScheme" "none"
[ 908.240] (**) (unnamed): (accel) selected scheme none/0
[ 908.240] (**) (unnamed): (accel) acceleration factor: 2.000
[ 908.240] (**) (unnamed): (accel) acceleration threshold: 4
[ 908.240] (II) config/udev: removing device (unnamed)
[ 908.240] (II) UnloadModule: "libinput"
[ 908.241] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 908.241] (II) No input driver specified, ignoring this device.
[ 908.241] (II) This device may have been added with another device file.
[ 908.241] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 908.241] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 908.241] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 908.241] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 908.241] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 908.241] (**) Option "Device" "/dev/input/event6"
[ 908.241] (**) Option "_source" "server/udev"
[ 908.296] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 908.296] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 908.320] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.000E/input/input30/event6"
[ 908.320] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 908.320] (**) Option "AccelerationScheme" "none"
[ 908.320] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 908.320] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 908.320] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 968.325] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 968.325] (II) UnloadModule: "libinput"
[ 969.964] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 969.964] (II) No input driver specified, ignoring this device.
[ 969.964] (II) This device may have been added with another device file.
[ 970.089] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 970.089] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 970.089] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 970.089] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 970.089] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 970.089] (**) Option "Device" "/dev/input/event6"
[ 970.089] (**) Option "_source" "server/udev"
[ 970.144] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 970.144] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 970.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.000F/input/input31/event6"
[ 970.172] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 970.172] (**) Option "AccelerationScheme" "none"
[ 970.172] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 970.172] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 970.172] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 1030.217] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 1030.217] (II) UnloadModule: "libinput"
[ 1031.812] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 1031.812] (II) No input driver specified, ignoring this device.
[ 1031.812] (II) This device may have been added with another device file.
[ 1032.117] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 1032.117] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1032.117] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 1032.117] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 1032.117] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 1032.117] (**) Option "Device" "/dev/input/event6"
[ 1032.117] (**) Option "_source" "server/udev"
[ 1032.172] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 1032.172] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 1032.196] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0010/input/input32/event6"
[ 1032.196] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 1032.196] (**) Option "AccelerationScheme" "none"
[ 1032.196] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 1032.196] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1032.196] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 1092.257] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 1092.257] (II) UnloadModule: "libinput"
[ 1093.842] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 1093.842] (II) No input driver specified, ignoring this device.
[ 1093.842] (II) This device may have been added with another device file.
[ 1094.065] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 1094.065] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1094.065] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 1094.065] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 1094.065] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 1094.065] (**) Option "Device" "/dev/input/event6"
[ 1094.065] (**) Option "_source" "server/udev"
[ 1094.120] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 1094.120] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 1094.144] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0011/input/input33/event6"
[ 1094.144] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 1094.144] (**) Option "AccelerationScheme" "none"
[ 1094.144] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 1094.144] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1094.144] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[ 1154.173] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[ 1154.173] (II) UnloadModule: "libinput"
[ 1155.784] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[ 1155.784] (II) No input driver specified, ignoring this device.
[ 1155.784] (II) This device may have been added with another device file.
[ 1156.025] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event6)
[ 1156.025] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1156.025] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 1156.025] (II) Using input driver 'libinput' for 'PixArt Microsoft USB Optical Mouse'
[ 1156.025] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[ 1156.025] (**) Option "Device" "/dev/input/event6"
[ 1156.025] (**) Option "_source" "server/udev"
[ 1156.080] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is tagged by udev as: Mouse
[ 1156.080] (II) input device 'PixArt Microsoft USB Optical Mouse', /dev/input/event6 is a pointer caps
[ 1156.108] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0012/input/input34/event6"
[ 1156.108] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 10)
[ 1156.108] (**) Option "AccelerationScheme" "none"
[ 1156.108] (**) PixArt Microsoft USB Optical Mouse: (accel) selected scheme none/0
[ 1156.108] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1156.108] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=665021
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3716368
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=734656
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3725418
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=664884
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3724391
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=659954
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3720316
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=665112
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3724883
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:03.0/sound/card1/input11
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card1/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=3746623
P: /devices/pci0000:00/0000:00:03.0/sound/card1/input11/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card1/input11/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3788573
P: /devices/pci0000:00/0000:00:03.0/sound/card1/input12
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card1/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=3747526
P: /devices/pci0000:00/0000:00:03.0/sound/card1/input12/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card1/input12/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3788518
P: /devices/pci0000:00/0000:00:03.0/sound/card1/input13
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card1/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=3748489
P: /devices/pci0000:00/0000:00:03.0/sound/card1/input13/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card1/input13/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3789265
P: /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0012/input/input34
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0012/input/input34
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_USB_Optical_Mouse
E: ID_MODEL_ENC=Microsoft\x20USB\x20Optical\x20Mouse
E: ID_MODEL_ID=0782
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=PixArt_Microsoft_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=PixArt
E: ID_VENDOR_ENC=PixArt
E: ID_VENDOR_ID=045e
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v045Ep0782e0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="PixArt Microsoft USB Optical Mouse"
E: PHYS="usb-0000:00:14.0-2/input0"
E: PRODUCT=3/45e/782/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=1155782246
P: /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0012/input/input34/event6
N: input/event6
S: input/by-id/usb-PixArt_Microsoft_USB_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-PixArt_Microsoft_USB_Optical_Mouse-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.0-event-mouse
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0012/input/input34/event6
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_USB_Optical_Mouse
E: ID_MODEL_ENC=Microsoft\x20USB\x20Optical\x20Mouse
E: ID_MODEL_ID=0782
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=PixArt_Microsoft_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=PixArt
E: ID_VENDOR_ENC=PixArt
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1156024797
P: /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0012/input/input34/mouse0
N: input/mouse0
S: input/by-id/usb-PixArt_Microsoft_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:2:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.0-mouse /dev/input/by-id/usb-PixArt_Microsoft_USB_Optical_Mouse-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:0782.0012/input/input34/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_USB_Optical_Mouse
E: ID_MODEL_ENC=Microsoft\x20USB\x20Optical\x20Mouse
E: ID_MODEL_ID=0782
E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0
E: ID_REVISION=0100
E: ID_SERIAL=PixArt_Microsoft_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=PixArt
E: ID_VENDOR_ENC=PixArt
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1155783749
P: /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_5_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=670c
E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0
E: ID_REVISION=4725
E: ID_SERIAL=CN09GTFM724874BLB41ZA00_Integrated_Webcam_HD
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN09GTFM724874BLB41ZA00
E: ID_VENDOR_ENC=CN09GTFM724874BLB41ZA00
E: ID_VENDOR_ID=0c45
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v0C45p670Ce4725-e0,1,kD4,ramlsfw
E: NAME="Integrated_Webcam_HD"
E: PHYS="usb-0000:00:14.0-5/button"
E: PRODUCT=3/c45/670c/4725
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3767713
P: /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16/event15
N: input/event15
S: input/by-id/usb-CN09GTFM724874BLB41ZA00_Integrated_Webcam_HD-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event /dev/input/by-id/usb-CN09GTFM724874BLB41ZA00_Integrated_Webcam_HD-event-if00
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=670c
E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0
E: ID_REVISION=4725
E: ID_SERIAL=CN09GTFM724874BLB41ZA00_Integrated_Webcam_HD
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN09GTFM724874BLB41ZA00
E: ID_VENDOR_ENC=CN09GTFM724874BLB41ZA00
E: ID_VENDOR_ID=0c45
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3800948
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0288e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/288/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3752868
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3788702
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=3754758
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3789079
P: /devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input17
E: ABS=260800000000003
E: DEVPATH=/devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input17
E: EV=b
E: ID_FOR_SEAT=input-platform-INT3433_00
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-INT3433:00
E: ID_PATH_TAG=platform-INT3433_00
E: ID_SERIAL=noserial
E: KEY=6420 10000 0 0 0 0
E: MODALIAS=input:b0018v06CBp76ADe0100-e0,1,3,k110,145,14A,14D,14E,ra0,1,2F,35,36,39,mlsfw
E: NAME="DLL0665:01 06CB:76AD Touchpad"
E: PHYS="i2c-DLL0665:01"
E: PRODUCT=18/6cb/76ad/100
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=3777567
P: /devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input17/event16
N: input/event16
S: input/by-path/platform-INT3433:00-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-INT3433:00-event-mouse
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input17/event16
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=56
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=101
E: ID_PATH=platform-INT3433:00
E: ID_PATH_TAG=platform-INT3433_00
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3804738
P: /devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input17/mouse2
N: input/mouse2
S: input/by-path/platform-INT3433:00-mouse
E: DEVLINKS=/dev/input/by-path/platform-INT3433:00-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/INT3433:00/i2c-7/i2c-DLL0665:01/0018:06CB:76AD.0002/input/input17/mouse2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-INT3433:00
E: ID_PATH_TAG=platform-INT3433_00
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3778508
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=1100f02902000 8380307cf910f001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=656506
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_81=playpause
E: KEYBOARD_KEY_82=stopcd
E: KEYBOARD_KEY_83=previoussong
E: KEYBOARD_KEY_84=nextsong
E: KEYBOARD_KEY_85=brightnessdown
E: KEYBOARD_KEY_86=brightnessup
E: KEYBOARD_KEY_87=battery
E: KEYBOARD_KEY_88=unknown
E: KEYBOARD_KEY_89=ejectclosecd
E: KEYBOARD_KEY_8F=switchvideomode
E: KEYBOARD_KEY_8a=suspend
E: KEYBOARD_KEY_8b=switchvideomode
E: KEYBOARD_KEY_8c=!unknown
E: KEYBOARD_KEY_90=previoussong
E: KEYBOARD_KEY_91=prog1
E: KEYBOARD_KEY_92=media
E: KEYBOARD_KEY_93=unknown
E: KEYBOARD_KEY_95=camera
E: KEYBOARD_KEY_97=email
E: KEYBOARD_KEY_98=f21
E: KEYBOARD_KEY_99=nextsong
E: KEYBOARD_KEY_9a=setup
E: KEYBOARD_KEY_9b=switchvideomode
E: KEYBOARD_KEY_9e=f21
E: KEYBOARD_KEY_a2=playpause
E: KEYBOARD_KEY_a4=stopcd
E: KEYBOARD_KEY_d8=screenlock
E: KEYBOARD_KEY_d9=f21
E: KEYBOARD_KEY_ed=media
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3714987
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input6
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input6
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1665033
P: /devices/platform/i8042/serio1/input/input6/event7
N: input/event7
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event7
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3736403
P: /devices/platform/i8042/serio1/input/input6/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1665392
P: /devices/platform/pcspkr/input/input9
E: DEVPATH=/devices/platform/pcspkr/input/input9
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3735482
P: /devices/platform/pcspkr/input/input9/event8
N: input/event8
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/pcspkr/input/input9/event8
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=3773330
P: /devices/virtual/input/input15
E: DEVPATH=/devices/virtual/input/input15
E: EV=13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=101000b00000400 100000 e000000000000 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k71,72,73,94,CA,E0,E1,E3,F0,F8,ram4,lsfw
E: MSC=10
E: NAME="Dell WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=3762197
P: /devices/virtual/input/input15/event14
N: input/event14
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/virtual/input/input15/event14
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3788509
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 0.592111] Linux agpgart interface v0.103
[ 0.651347] [drm] Initialized drm 1.1.0 20060810
[ 0.706607] [drm] Memory usable by graphics device = 4096M
[ 0.706612] fb: switching to inteldrmfb from simple
[ 0.706702] [drm] Replacing VGA console driver
[ 0.707012] [drm] ACPI BIOS requests an excessive sleep of 25000 ms, using 1500 ms instead
[ 0.713272] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.713274] [drm] Driver supports precise vblank timestamp query.
[ 0.739326] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 0.853181] fbcon: inteldrmfb (fb0) is primary device
[ 2.220875] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
-- System Information:
Debian Release: stretch/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.4.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.139
ii libaudit1 1:2.4.5-1+b1
ii libc6 2.22-3
ii libdbus-1-3 1.10.8-1
ii libdrm2 2.4.67-1
ii libegl1-mesa 11.1.2-1
ii libepoxy0 1.3.1-1
ii libgbm1 11.1.2-1
ii libgcrypt20 1.6.5-2
ii libgl1-mesa-glx [libgl1] 11.1.2-1
ii libpciaccess0 0.13.4-1
ii libpixman-1-0 0.33.6-1
ii libselinux1 2.4-3+b1
ii libsystemd0 229-2
ii libudev1 229-2
ii libxau6 1:1.0.8-1
ii libxdmcp6 1:1.1.2-1.1
ii libxfont1 1:1.5.1-1
ii libxshmfence1 1.2-1
ii udev 229-2
ii xserver-common 2:1.18.2-1
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 11.1.2-1
ii libpam-systemd 229-2
Versions of packages xserver-xorg-core suggests:
pn xfonts-100dpi | xfonts-75dpi <none>
pn xfonts-scalable <none>
-- no debconf information
#0 0x00007f83fcc32210 in drmHandleEvent () from /usr/lib/x86_64-linux-gnu/libdrm.so.2
#1 0x000055f46e5a173d in WakeupHandler ()
#2 0x000055f46e6f7c5f in WaitForSomething ()
#3 0x000055f46e59c9ce in ?? ()
#4 0x000055f46e5a0bb3 in ?? ()
#5 0x00007f83fb89a610 in __libc_start_main (main=0x55f46e58af10, argc=11, argv=0x7ffe34d6fdb8, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7ffe34d6fda8) at libc-start.c:291
#6 0x000055f46e58af49 in _start ()
Detaching from program: /usr/lib/xorg/Xorg, process 769
--- End Message ---