Package: xserver-xorg-video-intel
Version: 2:2.99.917-2~bpo8+1
Severity: important
Dear Maintainer,
I am using a Lenovo Thinkpad T450s, which is docked to a Lenovo Ultradock, when
I am sitting at my desk. An external display is connected to the dock via DVI.
I would like the external display to automatically turn on, when I put the
notebook into the dock.
Instead, the following happens:
1. The notebook is suspended, the lid is closed, I put it into the dock.
2. Nothing happens, the external display stays dark, the notebook is still
suspended. Even when I press keys on the external keyboard or move the mouse,
the display stays dark.
3. I open the lid, the internal display turns on and I can log in to debian.
However, the external display still stays dark. External keyboard and mouse are
working.
4. I open system preferences in Gnome. During the launch suddenly the external
display turns on, the internal one goes dark. Afterwards, it works as
configured: The external display is the main one, the internal one is turned
off and I can close the lid without any change.
Although this procedure works, I don't want to go through it several times per
day.
If I can provide additional information to help resolve this issue, I would be
happy to do so.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Feb 15 14:51 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2401376 Feb 11 2015 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:1616] (rev 09)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 31080 Feb 25 13:54 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 3.738]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 3.738] X Protocol Version 11, Revision 0
[ 3.738] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 3.738] Current Operating System: Linux raffi 4.3.0-0.bpo.1-amd64 #1 SMP Debian 4.3.3-7~bpo8+1 (2016-01-19) x86_64
[ 3.738] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.3.0-0.bpo.1-amd64 root=UUID=f5c9d52a-06da-4175-8c86-cdc3050e411a ro quiet
[ 3.738] Build Date: 11 February 2015 12:32:02AM
[ 3.738] Current version of pixman: 0.32.6
to make sure that you have the latest version.
[ 3.738] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.738] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 25 13:48:39 2016
[ 3.747] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.749] (==) No Layout section. Using the first Screen section.
[ 3.749] (==) No screen section available. Using defaults.
[ 3.749] (**) |-->Screen "Default Screen Section" (0)
[ 3.749] (**) | |-->Monitor "<default monitor>"
[ 3.749] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.749] (==) Automatically adding devices
[ 3.749] (==) Automatically enabling devices
[ 3.749] (==) Automatically adding GPU devices
[ 3.755] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3.755] Entry deleted from font path.
[ 3.764] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11/Type1".
[ 3.765] Entry deleted from font path.
[ 3.765] (Run 'mkfontdir' on "/usr/share/fonts/X11/Type1").
[ 3.765] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 3.765] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.765] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.765] (II) Loader magic: 0x562fe876cd80
[ 3.765] (II) Module ABI versions:
[ 3.765] X.Org ANSI C Emulation: 0.4
[ 3.765] X.Org Video Driver: 18.0
[ 3.765] X.Org XInput driver : 21.0
[ 3.765] X.Org Server Extension : 8.0
[ 3.765] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.869] (--) PCI:*(0:0:2:0) 8086:1616:17aa:5036 rev 9, Mem @ 0xe0000000/16777216, 0xd0000000/268435456, I/O @ 0x00003000/64
[ 3.869] (II) LoadModule: "glx"
[ 3.878] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.898] (II) Module glx: vendor="X.Org Foundation"
[ 3.898] compiled for 1.16.4, module version = 1.0.0
[ 3.898] ABI class: X.Org Server Extension, version 8.0
[ 3.898] (==) AIGLX enabled
[ 3.898] (==) Matched intel as autoconfigured driver 0
[ 3.898] (==) Matched intel as autoconfigured driver 1
[ 3.898] (==) Matched modesetting as autoconfigured driver 2
[ 3.898] (==) Matched fbdev as autoconfigured driver 3
[ 3.898] (==) Matched vesa as autoconfigured driver 4
[ 3.898] (==) Assigned the driver to the xf86ConfigLayout
[ 3.898] (II) LoadModule: "intel"
[ 3.902] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.911] (II) Module intel: vendor="X.Org Foundation"
[ 3.911] compiled for 1.16.4, module version = 2.99.917
[ 3.911] Module class: X.Org Video Driver
[ 3.911] ABI class: X.Org Video Driver, version 18.0
[ 3.911] (II) LoadModule: "modesetting"
[ 3.912] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.912] (II) Module modesetting: vendor="X.Org Foundation"
[ 3.912] compiled for 1.16.4, module version = 0.9.0
[ 3.912] Module class: X.Org Video Driver
[ 3.912] ABI class: X.Org Video Driver, version 18.0
[ 3.912] (II) LoadModule: "fbdev"
[ 3.912] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3.914] (II) Module fbdev: vendor="X.Org Foundation"
[ 3.914] compiled for 1.15.99.904, module version = 0.4.4
[ 3.914] Module class: X.Org Video Driver
[ 3.914] ABI class: X.Org Video Driver, version 18.0
[ 3.914] (II) LoadModule: "vesa"
[ 3.914] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3.914] (II) Module vesa: vendor="X.Org Foundation"
[ 3.914] compiled for 1.15.99.904, module version = 2.3.3
[ 3.914] Module class: X.Org Video Driver
[ 3.914] ABI class: X.Org Video Driver, version 18.0
[ 3.914] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.915] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 3.915] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 3.915] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 3.915] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3.915] (II) FBDEV: driver for framebuffer: fbdev
[ 3.915] (II) VESA: driver for VESA chipsets: vesa
[ 3.915] (++) using VT number 7
[ 3.923] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150731
[ 3.923] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2~bpo8+1 (Vincent Cheng <
vcheng@debian.org>)
[ 3.923] (II) intel(0): SNA compiled for use with valgrind
[ 3.924] (WW) Falling back to old probe method for modesetting
[ 3.924] (WW) Falling back to old probe method for fbdev
[ 3.924] (II) Loading sub module "fbdevhw"
[ 3.924] (II) LoadModule: "fbdevhw"
[ 3.924] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3.925] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3.925] compiled for 1.16.4, module version = 0.0.2
[ 3.925] ABI class: X.Org Video Driver, version 18.0
[ 3.925] (WW) Falling back to old probe method for vesa
[ 3.926] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD graphics 5500
[ 3.926] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 3.926] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.926] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.926] (==) intel(0): RGB weight 888
[ 3.926] (==) intel(0): Default visual is TrueColor
[ 3.926] (II) intel(0): Output eDP1 has no monitor section
[ 3.972] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 3.972] (II) intel(0): Enabled output eDP1
[ 3.972] (II) intel(0): Output DP1 has no monitor section
[ 3.972] (II) intel(0): Enabled output DP1
[ 3.972] (II) intel(0): Output HDMI1 has no monitor section
[ 3.972] (II) intel(0): Enabled output HDMI1
[ 3.972] (II) intel(0): Output DP2 has no monitor section
[ 3.972] (II) intel(0): Enabled output DP2
[ 3.972] (II) intel(0): Output HDMI2 has no monitor section
[ 3.972] (II) intel(0): Enabled output HDMI2
[ 3.972] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 3.972] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.972] (II) intel(0): Enabled output VIRTUAL1
[ 3.972] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 3.972] (==) intel(0): TearFree disabled
[ 3.972] (==) intel(0): DPI set to (96, 96)
[ 3.972] (II) Loading sub module "dri2"
[ 3.972] (II) LoadModule: "dri2"
[ 3.972] (II) Module "dri2" already built-in
[ 3.972] (II) Loading sub module "present"
[ 3.972] (II) LoadModule: "present"
[ 3.972] (II) Module "present" already built-in
[ 3.972] (II) UnloadModule: "modesetting"
[ 3.972] (II) Unloading modesetting
[ 3.972] (II) UnloadModule: "fbdev"
[ 3.972] (II) Unloading fbdev
[ 3.972] (II) UnloadSubModule: "fbdevhw"
[ 3.972] (II) Unloading fbdevhw
[ 3.972] (II) UnloadModule: "vesa"
[ 3.972] (II) Unloading vesa
[ 3.972] (==) Depth 24 pixmap format is 32 bpp
[ 3.975] (II) intel(0): SNA initialized with Broadwell backend
[ 3.975] (==) intel(0): Backing store enabled
[ 3.975] (==) intel(0): Silken mouse enabled
[ 3.976] (II) intel(0): HW Cursor enabled
[ 3.976] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.976] (==) intel(0): DPMS enabled
[ 3.977] (==) intel(0): display hotplug detection enabled
[ 3.977] (II) intel(0): [DRI2] Setup complete
[ 3.977] (II) intel(0): [DRI2] DRI driver: i965
[ 3.977] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3.977] (II) intel(0): direct rendering: DRI2 enabled
[ 3.977] (II) intel(0): hardware support for Present enabled
[ 3.977] (--) RandR disabled
[ 3.983] (II) SELinux: Disabled on system
[ 4.012] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4.012] (II) AIGLX: enabled GLX_ARB_create_context
[ 4.012] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4.013] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4.013] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4.013] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4.013] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 4.013] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 4.014] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4.014] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 4.014] (II) AIGLX: Loaded and initialized i965
[ 4.014] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4.019] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 4.026] (II) intel(0): Setting screen physical size to 508 x 285
[ 4.087] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4.087] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.087] (II) LoadModule: "evdev"
[ 4.087] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4.089] (II) Module evdev: vendor="X.Org Foundation"
[ 4.089] compiled for 1.16.0, module version = 2.9.0
[ 4.089] Module class: X.Org XInput Driver
[ 4.089] ABI class: X.Org XInput driver, version 21.0
[ 4.089] (II) Using input driver 'evdev' for 'Power Button'
[ 4.089] (**) Power Button: always reports core events
[ 4.089] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4.090] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.090] (--) evdev: Power Button: Found keys
[ 4.090] (II) evdev: Power Button: Configuring as keyboard
[ 4.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 4.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.090] (**) Option "xkb_rules" "evdev"
[ 4.090] (**) Option "xkb_model" "pc105"
[ 4.090] (**) Option "xkb_layout" "de"
[ 4.104] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 4.104] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4.104] (II) Using input driver 'evdev' for 'Video Bus'
[ 4.104] (**) Video Bus: always reports core events
[ 4.104] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 4.104] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4.104] (--) evdev: Video Bus: Found keys
[ 4.104] (II) evdev: Video Bus: Configuring as keyboard
[ 4.104] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6"
[ 4.104] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4.104] (**) Option "xkb_rules" "evdev"
[ 4.104] (**) Option "xkb_model" "pc105"
[ 4.104] (**) Option "xkb_layout" "de"
[ 4.105] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4.105] (II) No input driver specified, ignoring this device.
[ 4.105] (II) This device may have been added with another device file.
[ 4.105] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4.105] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.105] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.105] (**) Sleep Button: always reports core events
[ 4.105] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 4.105] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.105] (--) evdev: Sleep Button: Found keys
[ 4.105] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.105] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 4.105] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 4.105] (**) Option "xkb_rules" "evdev"
[ 4.105] (**) Option "xkb_model" "pc105"
[ 4.105] (**) Option "xkb_layout" "de"
[ 4.106] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[ 4.106] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 4.106] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 4.106] (**) Integrated Camera: always reports core events
[ 4.106] (**) evdev: Integrated Camera: Device: "/dev/input/event8"
[ 4.106] (--) evdev: Integrated Camera: Vendor 0x4ca Product 0x703c
[ 4.106] (--) evdev: Integrated Camera: Found keys
[ 4.106] (II) evdev: Integrated Camera: Configuring as keyboard
[ 4.106] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input10/event8"
[ 4.106] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[ 4.106] (**) Option "xkb_rules" "evdev"
[ 4.106] (**) Option "xkb_model" "pc105"
[ 4.106] (**) Option "xkb_layout" "de"
[ 4.107] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4.107] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.107] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.107] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.107] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4.107] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.107] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.107] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.107] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.107] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 4.107] (**) Option "xkb_rules" "evdev"
[ 4.107] (**) Option "xkb_model" "pc105"
[ 4.107] (**) Option "xkb_layout" "de"
[ 4.107] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 4.107] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4.107] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4.107] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 4.107] (II) LoadModule: "synaptics"
[ 4.108] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.109] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.109] compiled for 1.16.0.901, module version = 1.8.99
[ 4.109] Module class: X.Org XInput Driver
[ 4.109] ABI class: X.Org XInput driver, version 21.0
[ 4.109] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 4.109] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4.109] (**) Option "Device" "/dev/input/event7"
[ 4.192] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 4.192] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 45)
[ 4.192] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 68)
[ 4.192] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4.192] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4.192] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 4.192] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 4.192] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 4.192] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4.192] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4.236] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 4.236] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 4.236] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4.236] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 4.236] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 4.236] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 4.236] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4.236] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4.236] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4.236] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 4.236] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 4.236] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4.236] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 4.236] (II) No input driver specified, ignoring this device.
[ 4.236] (II) This device may have been added with another device file.
[ 4.238] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 4.238] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 4.238] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 4.238] (**) ThinkPad Extra Buttons: always reports core events
[ 4.238] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 4.238] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 4.238] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 4.238] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 4.238] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 4.238] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[ 4.238] (**) Option "xkb_rules" "evdev"
[ 4.238] (**) Option "xkb_model" "pc105"
[ 4.238] (**) Option "xkb_layout" "de"
[ 4.858] (II) intel(0): EDID vendor "AUO", prod id 4925
[ 4.858] (II) intel(0): Printing DDC gathered Modelines:
[ 4.858] (II) intel(0): Modeline "1920x1080"x0.0 141.00 1920 1936 1952 2104 1080 1083 1097 1116 -hsync -vsync (67.0 kHz eP)
[ 7.413] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 7.413] (II) No input driver specified, ignoring this device.
[ 7.413] (II) This device may have been added with another device file.
[ 7.421] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event9)
[ 7.421] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 7.421] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 7.421] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 7.421] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event9"
[ 7.421] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 7.421] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 7.421] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 7.421] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 7.421] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 7.421] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 7.421] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.421] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input9/event9"
[ 7.421] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 7.421] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 7.421] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 7.421] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 7.421] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 7.421] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 204.604] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse2)
[ 204.604] (II) No input driver specified, ignoring this device.
[ 204.604] (II) This device may have been added with another device file.
[ 204.604] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event10)
[ 204.604] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 204.604] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 204.604] (**) Logitech USB Optical Mouse: always reports core events
[ 204.604] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event10"
[ 204.624] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 204.624] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 204.624] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 204.624] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 204.624] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 204.624] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 204.624] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 204.624] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 204.624] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 204.624] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:046D:C05A.0001/input/input11/event10"
[ 204.624] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 14)
[ 204.624] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 204.624] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 204.624] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 204.624] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 204.624] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 204.955] (II) config/udev: Adding input device Logitech Logitech Wireless Headset (/dev/input/event13)
[ 204.955] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall"
[ 204.955] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset'
[ 204.955] (**) Logitech Logitech Wireless Headset: always reports core events
[ 204.955] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event13"
[ 204.955] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29
[ 204.955] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes
[ 204.955] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes
[ 204.955] (II) evdev: Logitech Logitech Wireless Headset: No buttons found, faking one.
[ 204.955] (--) evdev: Logitech Logitech Wireless Headset: Found keys
[ 204.955] (II) evdev: Logitech Logitech Wireless Headset: Forcing relative x/y axes to exist.
[ 204.955] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse
[ 204.955] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard
[ 204.955] (**) evdev: Logitech Logitech Wireless Headset: YAxisMapping: buttons 4 and 5
[ 204.955] (**) evdev: Logitech Logitech Wireless Headset: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 204.955] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.3/0003:046D:0A29.0004/input/input14/event13"
[ 204.955] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 15)
[ 204.955] (**) Option "xkb_rules" "evdev"
[ 204.955] (**) Option "xkb_model" "pc105"
[ 204.955] (**) Option "xkb_layout" "de"
[ 204.955] (EE) BUG: triggered 'if (axnum >= dev->valuator->numAxes)'
[ 204.955] (EE) BUG: ../../Xi/exevents.c:2086 in InitValuatorAxisStruct()
[ 204.955] (EE)
[ 204.955] (EE) Backtrace:
[ 204.956] (EE) 0: /usr/bin/Xorg (xorg_backtrace+0x56) [0x562fe84e5d46]
[ 204.956] (EE) 1: /usr/bin/Xorg (InitValuatorAxisStruct+0x67) [0x562fe8474e77]
[ 204.956] (EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (0x7ff585b8d000+0x4f38) [0x7ff585b91f38]
[ 204.956] (EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7ff585b8d000+0x53d6) [0x7ff585b923d6]
[ 204.956] (EE) 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7ff585b8d000+0x7058) [0x7ff585b94058]
[ 204.956] (EE) 5: /usr/bin/Xorg (ActivateDevice+0x4a) [0x562fe837b3da]
[ 204.956] (EE) 6: /usr/bin/Xorg (0x562fe832f000+0xa4b31) [0x562fe83d3b31]
[ 204.956] (EE) 7: /usr/bin/Xorg (0x562fe832f000+0xbb43b) [0x562fe83ea43b]
[ 204.956] (EE) 8: /usr/bin/Xorg (0x562fe832f000+0xbb7f0) [0x562fe83ea7f0]
[ 204.956] (EE) 9: /usr/bin/Xorg (WakeupHandler+0x6b) [0x562fe838b0db]
[ 204.956] (EE) 10: /usr/bin/Xorg (WaitForSomething+0x1c3) [0x562fe84e2ff3]
[ 204.956] (EE) 11: /usr/bin/Xorg (0x562fe832f000+0x57211) [0x562fe8386211]
[ 204.956] (EE) 12: /usr/bin/Xorg (0x562fe832f000+0x5b596) [0x562fe838a596]
[ 204.956] (EE) 13: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0x7ff58bd1eb45]
[ 204.956] (EE) 14: /usr/bin/Xorg (0x562fe832f000+0x4590e) [0x562fe837490e]
[ 204.956] (EE)
[ 204.956] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes.
[ 204.956] (**) Logitech Logitech Wireless Headset: (accel) keeping acceleration scheme 1
[ 204.956] (**) Logitech Logitech Wireless Headset: (accel) acceleration profile 0
[ 204.956] (**) Logitech Logitech Wireless Headset: (accel) acceleration factor: 2.000
[ 204.956] (**) Logitech Logitech Wireless Headset: (accel) acceleration threshold: 4
[ 204.962] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event12)
[ 204.962] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 204.962] (II) Using input driver 'evdev' for 'CHICONY USB Keyboard'
[ 204.962] (**) CHICONY USB Keyboard: always reports core events
[ 204.962] (**) evdev: CHICONY USB Keyboard: Device: "/dev/input/event12"
[ 204.962] (--) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x1113
[ 204.962] (--) evdev: CHICONY USB Keyboard: Found 1 mouse buttons
[ 204.962] (--) evdev: CHICONY USB Keyboard: Found scroll wheel(s)
[ 204.962] (--) evdev: CHICONY USB Keyboard: Found relative axes
[ 204.962] (II) evdev: CHICONY USB Keyboard: Forcing relative x/y axes to exist.
[ 204.962] (--) evdev: CHICONY USB Keyboard: Found absolute axes
[ 204.962] (II) evdev: CHICONY USB Keyboard: Forcing absolute x/y axes to exist.
[ 204.962] (--) evdev: CHICONY USB Keyboard: Found keys
[ 204.962] (II) evdev: CHICONY USB Keyboard: Configuring as mouse
[ 204.962] (II) evdev: CHICONY USB Keyboard: Configuring as keyboard
[ 204.962] (II) evdev: CHICONY USB Keyboard: Adding scrollwheel support
[ 204.962] (**) evdev: CHICONY USB Keyboard: YAxisMapping: buttons 4 and 5
[ 204.962] (**) evdev: CHICONY USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 204.962] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:04F2:1113.0003/input/input13/event12"
[ 204.962] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 16)
[ 204.962] (**) Option "xkb_rules" "evdev"
[ 204.962] (**) Option "xkb_model" "pc105"
[ 204.962] (**) Option "xkb_layout" "de"
[ 204.963] (II) evdev: CHICONY USB Keyboard: initialized for relative axes.
[ 204.963] (WW) evdev: CHICONY USB Keyboard: ignoring absolute axes.
[ 204.963] (**) CHICONY USB Keyboard: (accel) keeping acceleration scheme 1
[ 204.963] (**) CHICONY USB Keyboard: (accel) acceleration profile 0
[ 204.963] (**) CHICONY USB Keyboard: (accel) acceleration factor: 2.000
[ 204.963] (**) CHICONY USB Keyboard: (accel) acceleration threshold: 4
[ 204.966] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event11)
[ 204.966] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 204.966] (II) Using input driver 'evdev' for 'CHICONY USB Keyboard'
[ 204.966] (**) CHICONY USB Keyboard: always reports core events
[ 204.966] (**) evdev: CHICONY USB Keyboard: Device: "/dev/input/event11"
[ 204.966] (--) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x1113
[ 204.966] (--) evdev: CHICONY USB Keyboard: Found keys
[ 204.966] (II) evdev: CHICONY USB Keyboard: Configuring as keyboard
[ 204.966] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:04F2:1113.0002/input/input12/event11"
[ 204.966] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 17)
[ 204.966] (**) Option "xkb_rules" "evdev"
[ 204.966] (**) Option "xkb_model" "pc105"
[ 204.966] (**) Option "xkb_layout" "de"
[ 246.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-3 (null)
[ 246.053] (II) intel(0): Output DP2-1 has no monitor section
[ 246.053] (II) intel(0): Enabled output DP2-1
[ 246.068] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-4 (null)
[ 246.068] (II) intel(0): Output DP2-2 has no monitor section
[ 246.068] (II) intel(0): Enabled output DP2-2
[ 246.068] (II) intel(0): Output DP2-3 has no monitor section
[ 246.068] (II) intel(0): Enabled output DP2-3
[ 246.236] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-5 (null)
[ 246.531] (II) intel(0): resizing framebuffer to 1680x1050
[ 246.535] (II) intel(0): switch to mode 1680x1050@60.0 on DP2-2 using pipe 0, position (0, 0), rotation normal, reflection none
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=81012
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=35987
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=47180
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=47255
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=80905
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=34144
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=80978
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=35242
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:046D:C05A.0001/input/input11
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:046D:C05A.0001/input/input11
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05a
E: ID_PATH=pci-0000:00:14.0-usb-0:3.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_REVISION=6300
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v046DpC05Ae0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Optical Mouse"
E: PHYS="usb-0000:00:14.0-3.3/input0"
E: PRODUCT=3/46d/c05a/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4432580
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:046D:C05A.0001/input/input11/event10
N: input/event10
S: input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-event-mouse
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:046D:C05A.0001/input/input11/event10
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05a
E: ID_PATH=pci-0000:00:14.0-usb-0:3.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_REVISION=6300
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4432642
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:046D:C05A.0001/input/input11/mouse2
N: input/mouse2
S: input/by-id/usb-Logitech_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:046D:C05A.0001/input/input11/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05a
E: ID_PATH=pci-0000:00:14.0-usb-0:3.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_REVISION=6300
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4432610
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:04F2:1113.0002/input/input12
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:04F2:1113.0002/input/input12
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_4_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=1113
E: ID_PATH=pci-0000:00:14.0-usb-0:3.4.1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_4_1_1_0
E: ID_REVISION=0001
E: ID_SERIAL=CHICONY_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CHICONY
E: ID_VENDOR_ENC=CHICONY
E: ID_VENDOR_ID=04f2
E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0003v04F2p1113e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="CHICONY USB Keyboard"
E: PHYS="usb-0000:00:14.0-3.4.1/input0"
E: PRODUCT=3/4f2/1113/110
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4432882
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:04F2:1113.0002/input/input12/event11
N: input/event11
S: input/by-id/usb-CHICONY_USB_Keyboard-event-kbd
S: input/by-path/pci-0000:00:14.0-usb-0:3.4.1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-CHICONY_USB_Keyboard-event-kbd /dev/input/by-path/pci-0000:00:14.0-usb-0:3.4.1:1.0-event-kbd
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/0003:04F2:1113.0002/input/input12/event11
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=1113
E: ID_PATH=pci-0000:00:14.0-usb-0:3.4.1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_4_1_1_0
E: ID_REVISION=0001
E: ID_SERIAL=CHICONY_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CHICONY
E: ID_VENDOR_ENC=CHICONY
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4488263
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:04F2:1113.0003/input/input13
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:04F2:1113.0003/input/input13
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_4_1_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=1113
E: ID_PATH=pci-0000:00:14.0-usb-0:3.4.1:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_4_1_1_1
E: ID_REVISION=0001
E: ID_SERIAL=CHICONY_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=CHICONY
E: ID_VENDOR_ENC=CHICONY
E: ID_VENDOR_ID=04f2
E: KEY=3f0003007f 0 0 483ffff17aff32d bf54444600000000 1 130f938b17c000 677bfad941dfed 9ed68000004400 10000002
E: MODALIAS=input:b0003v04F2p1113e0110-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E7,E8,E9,EA,EB,F0,F1,F4,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,250,251,260,261,262,263,264,265,r6,a20,m4,lsfw
E: MSC=10
E: NAME="CHICONY USB Keyboard"
E: PHYS="usb-0000:00:14.0-3.4.1/input1"
E: PRODUCT=3/4f2/1113/110
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4489544
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:04F2:1113.0003/input/input13/event12
N: input/event12
S: input/by-id/usb-CHICONY_USB_Keyboard-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:3.4.1:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-CHICONY_USB_Keyboard-event-if01 /dev/input/by-path/pci-0000:00:14.0-usb-0:3.4.1:1.1-event
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.1/0003:04F2:1113.0003/input/input13/event12
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=1113
E: ID_PATH=pci-0000:00:14.0-usb-0:3.4.1:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_4_1_1_1
E: ID_REVISION=0001
E: ID_SERIAL=CHICONY_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=CHICONY
E: ID_VENDOR_ENC=CHICONY
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4544193
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.3/0003:046D:0A29.0004/input/input14
E: ABS=ffffff0000000000
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.3/0003:046D:0A29.0004/input/input14
E: EV=1b
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_4_2_1_3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Logitech_Wireless_Headset
E: ID_MODEL_ENC=Logitech\x20Wireless\x20Headset
E: ID_MODEL_ID=0a29
E: ID_PATH=pci-0000:00:14.0-usb-0:3.4.2:1.3
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_4_2_1_3
E: ID_REVISION=7657
E: ID_SERIAL=Logitech_Logitech_Wireless_Headset_000D44D3DFB7
E: ID_SERIAL_SHORT=000D44D3DFB7
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:010100:010200:030000:
E: ID_USB_INTERFACE_NUM=03
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=18000 17800000000 8e000000000000 0
E: MODALIAS=input:b0003v046Dp0A29e0111-e0,1,3,4,k71,72,73,77,A3,A4,A5,A6,A8,CF,D0,ra28,29,2A,2B,2C,2D,2E,2F,30,31,32,33,34,35,36,37,38,39,3A,3B,3C,3D,3E,m4,lsfw
E: MSC=10
E: NAME="Logitech Logitech Wireless Headset"
E: PHYS="usb-0000:00:14.0-3.4.2/input3"
E: PRODUCT=3/46d/a29/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ="000D44D3DFB7"
E: USEC_INITIALIZED=4547391
P: /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.3/0003:046D:0A29.0004/input/input14/event13
N: input/event13
S: input/by-id/usb-Logitech_Logitech_Wireless_Headset_000D44D3DFB7-event-if03
S: input/by-path/pci-0000:00:14.0-usb-0:3.4.2:1.3-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_Logitech_Wireless_Headset_000D44D3DFB7-event-if03 /dev/input/by-path/pci-0000:00:14.0-usb-0:3.4.2:1.3-event
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.3/0003:046D:0A29.0004/input/input14/event13
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Logitech_Wireless_Headset
E: ID_MODEL_ENC=Logitech\x20Wireless\x20Headset
E: ID_MODEL_ID=0a29
E: ID_PATH=pci-0000:00:14.0-usb-0:3.4.2:1.3
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_4_2_1_3
E: ID_REVISION=7657
E: ID_SERIAL=Logitech_Logitech_Wireless_Headset_000D44D3DFB7
E: ID_SERIAL_SHORT=000D44D3DFB7
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:010100:010200:030000:
E: ID_USB_INTERFACE_NUM=03
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4600249
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input10
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input10
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_8_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=703c
E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0
E: ID_REVISION=0017
E: ID_SERIAL=J89FC71Z9_Integrated_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=J89FC71Z9
E: ID_VENDOR_ENC=J89FC71Z9
E: ID_VENDOR_ID=04ca
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04CAp703Ce0017-e0,1,kD4,ramlsfw
E: NAME="Integrated Camera"
E: PHYS="usb-0000:00:14.0-8/button"
E: PRODUCT=3/4ca/703c/17
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=15459
P: /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input10/event8
N: input/event8
S: input/by-id/usb-J89FC71Z9_Integrated_Camera-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-J89FC71Z9_Integrated_Camera-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input10/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=703c
E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0
E: ID_REVISION=0017
E: ID_SERIAL=J89FC71Z9_Integrated_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=J89FC71Z9
E: ID_VENDOR_ENC=J89FC71Z9
E: ID_VENDOR_ID=04ca
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=15657
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB54-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab54
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5063
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=33674
E: XKBLAYOUT=de
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input7
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input7
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=68823
P: /devices/platform/i8042/serio1/input/input7/event7
N: input/event7
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=68937
P: /devices/platform/i8042/serio1/input/input7/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=68922
P: /devices/platform/i8042/serio1/serio2/input/input9
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input9
E: EV=7
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ae0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="TPPS/2 IBM TrackPoint"
E: PHYS="synaptics-pt/serio0/input0"
E: PRODUCT=11/2/a/0
E: PROP=21
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12056
P: /devices/platform/i8042/serio1/serio2/input/input9/event9
N: input/event9
S: input/by-path/platform-i8042-serio-2-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input9/event9
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=12681
P: /devices/platform/i8042/serio1/serio2/input/input9/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-2-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input9/mouse1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=12625
P: /devices/platform/pcspkr/input/input6
E: DEVPATH=/devices/platform/pcspkr/input/input6
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=30308
P: /devices/platform/pcspkr/input/input6/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/pcspkr/input/input6/event4
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=36665
P: /devices/platform/thinkpad_acpi/input/input5
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input5
E: EV=33
E: ID_FOR_SEAT=input-platform-thinkpad_acpi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEY=10040 0 18040000 0 10000000000000 0 1501b02102004 c000280041114000 10e000000000000 0
E: MODALIAS=input:b0019v17AAp5054e4101-e0,1,4,5,k71,72,73,78,8E,90,94,98,9E,AB,AD,BE,BF,C2,CD,D4,D9,E0,E1,E3,E4,EC,EE,F0,174,1D2,1DB,1DC,246,250,ram4,lsfw3,
E: MSC=10
E: NAME="ThinkPad Extra Buttons"
E: PHYS="thinkpad_acpi/input0"
E: PRODUCT=19/17aa/5054/4101
E: PROP=0
E: SUBSYSTEM=input
E: SW=8
E: TAGS=:seat:
E: USEC_INITIALIZED=43166
P: /devices/platform/thinkpad_acpi/input/input5/event5
N: input/event5
S: input/by-path/platform-thinkpad_acpi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-thinkpad_acpi-event
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input5/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEYBOARD_KEY_01=screenlock
E: KEYBOARD_KEY_02=battery
E: KEYBOARD_KEY_03=sleep
E: KEYBOARD_KEY_04=wlan
E: KEYBOARD_KEY_06=switchvideomode
E: KEYBOARD_KEY_07=f21
E: KEYBOARD_KEY_08=f24
E: KEYBOARD_KEY_0b=suspend
E: KEYBOARD_KEY_0f=brightnessup
E: KEYBOARD_KEY_10=brightnessdown
E: KEYBOARD_KEY_11=kbdillumtoggle
E: KEYBOARD_KEY_13=zoom
E: KEYBOARD_KEY_14=volumeup
E: KEYBOARD_KEY_15=volumedown
E: KEYBOARD_KEY_16=mute
E: KEYBOARD_KEY_17=prog1
E: KEYBOARD_KEY_1a=f20
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43974
E: XKBLAYOUT=de
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 1.260792] Linux agpgart interface v0.103
[ 1.937941] ata1.00: supports DRM functions and may not be fully accessible
[ 1.940613] ata1.00: supports DRM functions and may not be fully accessible
[ 2.272481] [drm] Initialized drm 1.1.0 20060810
[ 2.324116] [drm] Memory usable by graphics device = 4096M
[ 2.324121] fb: switching to inteldrmfb from simple
[ 2.324235] [drm] Replacing VGA console driver
[ 2.336102] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.336104] [drm] Driver supports precise vblank timestamp query.
[ 2.359083] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
[ 2.411855] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 2.429358] fbcon: inteldrmfb (fb0) is primary device
[ 3.451265] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 186.531789] ata1.00: supports DRM functions and may not be fully accessible
[ 186.534384] ata1.00: supports DRM functions and may not be fully accessible
-- System Information:
Debian Release: 8.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.3.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-18+deb8u3
ii libdrm-intel1 2.4.66-2~bpo8+1
ii libdrm2 2.4.66-2~bpo8+1
ii libpciaccess0 0.13.2-3+b1
ii libpixman-1-0 0.32.6-3
ii libudev1 215-17+deb8u3
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb-dri2-0 1.10-3+b1
ii libxcb-dri3-0 1.10-3+b1
ii libxcb-sync1 1.10-3+b1
ii libxcb-util0 0.3.8-3
ii libxcb1 1.10-3+b1
ii libxcursor1 1:1.1.14-1+b1
ii libxdamage1 1:1.1.4-2+b1
ii libxext6 2:1.3.3-1
ii libxfixes3 1:5.0.1-2+b2
ii libxinerama1 2:1.1.3-1+b1
ii libxrandr2 2:1.4.2-1+b1
ii libxrender1 1:0.9.8-1+b1
ii libxshmfence1 1.1-4
ii libxtst6 2:1.2.2-1+b1
ii libxv1 2:1.0.10-1+b1
ii libxvmc1 2:1.0.8-2+b1
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.4-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information