On Wed, Jan 27, 2016 at 08:29:21AM +0100, Julien Cristau wrote:
> On Tue, Jan 26, 2016 at 16:51:27 +0100, Agustin Martin wrote:
>
> > Package: xserver-xorg-core
> > Version: 2:1.17.3-2
> > Severity: normal
> >
> > Dear Maintainers,
> >
> > I am having a strange problem apparently starting with 2:1.17.2-3.
> >
> > I often have a display-manager controlled X session for one user and open
> > another X session in a free tty for a different user with startx.
> >
> > This has been working for a long time. However, after a recent testing
> > upgrade including xserver-xorg-core 2:1.17.2-3 this started to fail
> > (failure happened before in a sid box, but there were more upgrades to
> > look when trying to locate which change might be responsible).
> >
> > When I have a display-mamager controlled X session and, without leaving the
> > session, switch to a free tty, login as another user and start an X session
> > with startx original X session gets killed and I am sent to DM greeter.
> >
> Please provide the log from both X processes.
Hi, thanks for quick reply.
Please find them attached.
DM (wdm in this case) is started at display 0, startx from tty is
started at display 1
Xorg.1.log: Log for display 1, session started with startx -- :1
Xorg.0.log: Log for display 0 when user session has already been wrongly
killed and DM greeter shown again.
Xorg.0.log.old: Hopefully log for killed session at display 0. Did not
notice before, but there is some possibly interesting info in
it.
- Unable to get master: Invalid argument
- NOUVEAU(0): failed to set mode: Permission denied
- Fatal server error: EnterVT failed for screen 0
- Error dropping master: -22(Invalid argument)
...
xserver-xorg-legacy is installed for this test.
Hope this helps,
--
Agustin
[ 1410.663] X.Org X Server 1.17.3 Release Date: 2015-10-26 [ 1410.663] X Protocol Version 11, Revision 0 [ 1410.663] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 1410.663] Current Operating System: Linux uguindo 4.3.0-1-amd64 #1 SMP Debian 4.3.3-7 (2016-01-19) x86_64 [ 1410.663] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0-1-amd64 root=/dev/mapper/debian-testing ro quiet [ 1410.663] Build Date: 27 October 2015 11:41:02PM [ 1410.663] xorg-server 2:1.17.3-2 (http://www.debian.org/support) [ 1410.663] Current version of pixman: 0.33.6 [ 1410.663] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1410.663] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1410.663] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Jan 27 15:28:33 2016 [ 1410.663] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 1410.664] (==) No Layout section. Using the first Screen section. [ 1410.664] (==) No screen section available. Using defaults. [ 1410.664] (**) |-->Screen "Default Screen Section" (0) [ 1410.664] (**) | |-->Monitor "<default monitor>" [ 1410.664] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 1410.664] (==) Automatically adding devices [ 1410.664] (==) Automatically enabling devices [ 1410.664] (==) Automatically adding GPU devices [ 1410.664] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 1410.664] Entry deleted from font path. [ 1410.664] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 1410.664] (==) ModulePath set to "/usr/lib/xorg/modules" [ 1410.664] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 1410.664] (II) Loader magic: 0x55c456ea7de0 [ 1410.664] (II) Module ABI versions: [ 1410.664] X.Org ANSI C Emulation: 0.4 [ 1410.664] X.Org Video Driver: 19.0 [ 1410.664] X.Org XInput driver : 21.0 [ 1410.664] X.Org Server Extension : 9.0 [ 1410.667] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_34 [ 1410.667] (II) xfree86: Adding drm device (/dev/dri/card0) [ 1410.668] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0 [ 1410.669] (--) PCI:*(0:1:0:0) 10de:104a:1043:8460 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 1410.669] (II) LoadModule: "glx" [ 1410.669] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 1410.671] (II) Module glx: vendor="X.Org Foundation" [ 1410.671] compiled for 1.17.3, module version = 1.0.0 [ 1410.671] ABI class: X.Org Server Extension, version 9.0 [ 1410.671] (==) AIGLX enabled [ 1410.671] (==) Matched nouveau as autoconfigured driver 0 [ 1410.671] (==) Matched nv as autoconfigured driver 1 [ 1410.671] (==) Matched nouveau as autoconfigured driver 2 [ 1410.671] (==) Matched nv as autoconfigured driver 3 [ 1410.671] (==) Matched modesetting as autoconfigured driver 4 [ 1410.671] (==) Matched fbdev as autoconfigured driver 5 [ 1410.671] (==) Matched vesa as autoconfigured driver 6 [ 1410.671] (==) Assigned the driver to the xf86ConfigLayout [ 1410.671] (II) LoadModule: "nouveau" [ 1410.671] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 1410.671] (II) Module nouveau: vendor="X.Org Foundation" [ 1410.671] compiled for 1.17.3, module version = 1.0.12 [ 1410.671] Module class: X.Org Video Driver [ 1410.671] ABI class: X.Org Video Driver, version 19.0 [ 1410.671] (II) LoadModule: "nv" [ 1410.671] (WW) Warning, couldn't open module nv [ 1410.671] (II) UnloadModule: "nv" [ 1410.671] (II) Unloading nv [ 1410.671] (EE) Failed to load module "nv" (module does not exist, 0) [ 1410.671] (II) LoadModule: "modesetting" [ 1410.671] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 1410.671] (II) Module modesetting: vendor="X.Org Foundation" [ 1410.671] compiled for 1.17.3, module version = 1.17.3 [ 1410.671] Module class: X.Org Video Driver [ 1410.671] ABI class: X.Org Video Driver, version 19.0 [ 1410.671] (II) LoadModule: "fbdev" [ 1410.672] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 1410.672] (II) Module fbdev: vendor="X.Org Foundation" [ 1410.672] compiled for 1.17.1, module version = 0.4.4 [ 1410.672] Module class: X.Org Video Driver [ 1410.672] ABI class: X.Org Video Driver, version 19.0 [ 1410.672] (II) LoadModule: "vesa" [ 1410.672] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 1410.672] (II) Module vesa: vendor="X.Org Foundation" [ 1410.672] compiled for 1.17.3, module version = 2.3.4 [ 1410.672] Module class: X.Org Video Driver [ 1410.672] ABI class: X.Org Video Driver, version 19.0 [ 1410.672] (II) NOUVEAU driver Date: Tue Dec 8 15:52:25 2015 +1000 [ 1410.672] (II) NOUVEAU driver for NVIDIA chipset families : [ 1410.672] RIVA TNT (NV04) [ 1410.672] RIVA TNT2 (NV05) [ 1410.672] GeForce 256 (NV10) [ 1410.672] GeForce 2 (NV11, NV15) [ 1410.672] GeForce 4MX (NV17, NV18) [ 1410.672] GeForce 3 (NV20) [ 1410.672] GeForce 4Ti (NV25, NV28) [ 1410.672] GeForce FX (NV3x) [ 1410.672] GeForce 6 (NV4x) [ 1410.672] GeForce 7 (G7x) [ 1410.672] GeForce 8 (G8x) [ 1410.672] GeForce GTX 200 (NVA0) [ 1410.672] GeForce GTX 400 (NVC0) [ 1410.672] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 1410.672] (II) FBDEV: driver for framebuffer: fbdev [ 1410.672] (II) VESA: driver for VESA chipsets: vesa [ 1410.672] (++) using VT number 2 [ 1410.672] (II) [drm] nouveau interface version: 1.3.0 [ 1410.672] (WW) Falling back to old probe method for modesetting [ 1410.672] (WW) Falling back to old probe method for fbdev [ 1410.672] (II) Loading sub module "fbdevhw" [ 1410.672] (II) LoadModule: "fbdevhw" [ 1410.672] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 1410.672] (II) Module fbdevhw: vendor="X.Org Foundation" [ 1410.672] compiled for 1.17.3, module version = 0.0.2 [ 1410.672] ABI class: X.Org Video Driver, version 19.0 [ 1410.672] (WW) Falling back to old probe method for vesa [ 1410.673] (II) Loading sub module "dri2" [ 1410.673] (II) LoadModule: "dri2" [ 1410.673] (II) Module "dri2" already built-in [ 1410.673] (--) NOUVEAU(0): Chipset: "NVIDIA NVD9" [ 1410.673] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 1410.673] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 1410.673] (==) NOUVEAU(0): RGB weight 888 [ 1410.673] (==) NOUVEAU(0): Default visual is TrueColor [ 1410.673] (==) NOUVEAU(0): Using HW cursor [ 1410.673] (==) NOUVEAU(0): Allowed maximum DRI level 2. [ 1410.673] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 1410.673] (==) NOUVEAU(0): Page flipping enabled [ 1410.673] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 1410.673] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 1410.673] (II) NOUVEAU(0): Initializing outputs ... [ 1410.685] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section [ 1410.687] (II) NOUVEAU(0): Output HDMI-1 has no monitor section [ 1410.728] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 1410.728] (II) NOUVEAU(0): 3 crtcs needed for screen. [ 1410.729] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 1410.729] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 1410.741] (II) NOUVEAU(0): EDID for output DVI-I-1 [ 1410.743] (II) NOUVEAU(0): EDID for output HDMI-1 [ 1410.784] (II) NOUVEAU(0): EDID for output VGA-1 [ 1410.784] (II) NOUVEAU(0): Manufacturer: SAM Model: 59a Serial#: 1129132594 [ 1410.784] (II) NOUVEAU(0): Year: 2010 Week: 11 [ 1410.784] (II) NOUVEAU(0): EDID Version: 1.3 [ 1410.784] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 1410.784] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen [ 1410.784] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 27 [ 1410.784] (II) NOUVEAU(0): Gamma: 2.20 [ 1410.785] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display [ 1410.785] (II) NOUVEAU(0): First detailed timing is preferred mode [ 1410.785] (II) NOUVEAU(0): redX: 0.648 redY: 0.339 greenX: 0.292 greenY: 0.603 [ 1410.785] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.070 whiteX: 0.312 whiteY: 0.329 [ 1410.785] (II) NOUVEAU(0): Supported established timings: [ 1410.785] (II) NOUVEAU(0): 640x480@60Hz [ 1410.785] (II) NOUVEAU(0): 800x600@56Hz [ 1410.785] (II) NOUVEAU(0): 800x600@60Hz [ 1410.785] (II) NOUVEAU(0): 1024x768@60Hz [ 1410.785] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 1410.785] (II) NOUVEAU(0): Supported standard timings: [ 1410.785] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 1410.785] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 1410.785] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 1410.785] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 1410.785] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 1410.785] (II) NOUVEAU(0): Supported detailed timing: [ 1410.785] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 477 x 268 mm [ 1410.785] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 1410.785] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 1410.785] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz [ 1410.785] (II) NOUVEAU(0): Monitor name: SyncMaster [ 1410.785] (II) NOUVEAU(0): Serial No: HMFZ300654 [ 1410.785] (II) NOUVEAU(0): EDID (in hex): [ 1410.785] (II) NOUVEAU(0): 00ffffffffffff004c2d9a0532324d43 [ 1410.785] (II) NOUVEAU(0): 0b1401030e301b782a3d81a6564a9a24 [ 1410.785] (II) NOUVEAU(0): 1250542308008100814081809500b300 [ 1410.785] (II) NOUVEAU(0): 010101010101023a801871382d40582c [ 1410.785] (II) NOUVEAU(0): 4500dd0c1100001e000000fd00383d1e [ 1410.785] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053 [ 1410.785] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff [ 1410.785] (II) NOUVEAU(0): 00484d465a3330303635340a20200028 [ 1410.785] (II) NOUVEAU(0): Printing probed modes for output VGA-1 [ 1410.785] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1410.785] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1410.785] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1410.785] (II) NOUVEAU(0): Output DVI-I-1 disconnected [ 1410.785] (II) NOUVEAU(0): Output HDMI-1 disconnected [ 1410.785] (II) NOUVEAU(0): Output VGA-1 connected [ 1410.785] (II) NOUVEAU(0): Using exact sizes for initial modes [ 1410.785] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080 [ 1410.785] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1410.785] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0) [ 1410.785] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1410.786] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1410.786] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz [ 1410.786] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1410.786] (==) NOUVEAU(0): DPI set to (96, 96) [ 1410.786] (II) Loading sub module "fb" [ 1410.786] (II) LoadModule: "fb" [ 1410.786] (II) Loading /usr/lib/xorg/modules/libfb.so [ 1410.786] (II) Module fb: vendor="X.Org Foundation" [ 1410.786] compiled for 1.17.3, module version = 1.0.0 [ 1410.786] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1410.786] (II) Loading sub module "shadowfb" [ 1410.786] (II) LoadModule: "shadowfb" [ 1410.786] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 1410.787] (II) Module shadowfb: vendor="X.Org Foundation" [ 1410.787] compiled for 1.17.3, module version = 1.0.0 [ 1410.787] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1410.787] (II) UnloadModule: "modesetting" [ 1410.787] (II) Unloading modesetting [ 1410.787] (II) UnloadModule: "fbdev" [ 1410.787] (II) Unloading fbdev [ 1410.787] (II) UnloadSubModule: "fbdevhw" [ 1410.787] (II) Unloading fbdevhw [ 1410.787] (II) UnloadModule: "vesa" [ 1410.787] (II) Unloading vesa [ 1410.787] (--) Depth 24 pixmap format is 32 bpp [ 1410.815] (II) NOUVEAU(0): Channel setup complete. [ 1410.840] (II) NOUVEAU(0): [COPY] async initialised. [ 1410.840] (II) NOUVEAU(0): Hardware support for Present enabled [ 1410.840] (II) NOUVEAU(0): [DRI2] Setup complete [ 1410.840] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 1410.840] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 1410.840] (II) Loading sub module "exa" [ 1410.840] (II) LoadModule: "exa" [ 1410.840] (II) Loading /usr/lib/xorg/modules/libexa.so [ 1410.840] (II) Module exa: vendor="X.Org Foundation" [ 1410.840] compiled for 1.17.3, module version = 2.6.0 [ 1410.840] ABI class: X.Org Video Driver, version 19.0 [ 1410.840] (II) EXA(0): Driver allocated offscreen pixmaps [ 1410.840] (II) EXA(0): Driver registered support for the following operations: [ 1410.841] (II) Solid [ 1410.841] (II) Copy [ 1410.841] (II) Composite (RENDER acceleration) [ 1410.841] (II) UploadToScreen [ 1410.841] (II) DownloadFromScreen [ 1410.841] (==) NOUVEAU(0): Backing store enabled [ 1410.841] (==) NOUVEAU(0): Silken mouse enabled [ 1410.841] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 1410.841] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 1410.841] (==) NOUVEAU(0): DPMS enabled [ 1410.841] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 1410.841] (--) RandR disabled [ 1410.846] (II) SELinux: Disabled on system [ 1410.887] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 1410.887] (II) AIGLX: enabled GLX_ARB_create_context [ 1410.887] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 1410.887] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 1410.887] (II) AIGLX: enabled GLX_INTEL_swap_event [ 1410.887] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 1410.887] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 1410.887] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 1410.887] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 1410.890] (II) AIGLX: Loaded and initialized nouveau [ 1410.890] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 1410.894] (II) NOUVEAU(0): NVEnterVT is called. [ 1410.921] (II) NOUVEAU(0): Setting screen physical size to 508 x 285 [ 1410.921] resize called 1920 1080 [ 1410.969] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 1410.969] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1410.969] (II) LoadModule: "evdev" [ 1410.969] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 1410.969] (II) Module evdev: vendor="X.Org Foundation" [ 1410.969] compiled for 1.16.4, module version = 2.9.2 [ 1410.969] Module class: X.Org XInput Driver [ 1410.969] ABI class: X.Org XInput driver, version 21.0 [ 1410.970] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 16 paused 0 [ 1410.970] (II) Using input driver 'evdev' for 'Power Button' [ 1410.970] (**) Power Button: always reports core events [ 1410.970] (**) evdev: Power Button: Device: "/dev/input/event3" [ 1410.970] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1410.970] (--) evdev: Power Button: Found keys [ 1410.970] (II) evdev: Power Button: Configuring as keyboard [ 1410.970] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" [ 1410.970] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 1410.970] (**) Option "xkb_rules" "evdev" [ 1410.970] (**) Option "xkb_model" "pc105" [ 1410.970] (**) Option "xkb_layout" "es" [ 1410.970] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1410.990] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 1410.991] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1410.992] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 17 paused 0 [ 1410.992] (II) Using input driver 'evdev' for 'Power Button' [ 1410.992] (**) Power Button: always reports core events [ 1410.992] (**) evdev: Power Button: Device: "/dev/input/event2" [ 1410.992] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1410.992] (--) evdev: Power Button: Found keys [ 1410.992] (II) evdev: Power Button: Configuring as keyboard [ 1410.992] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2" [ 1410.992] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 1410.992] (**) Option "xkb_rules" "evdev" [ 1410.992] (**) Option "xkb_model" "pc105" [ 1410.992] (**) Option "xkb_layout" "es" [ 1410.992] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1410.994] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14) [ 1410.994] (II) No input driver specified, ignoring this device. [ 1410.994] (II) This device may have been added with another device file. [ 1410.994] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15) [ 1410.994] (II) No input driver specified, ignoring this device. [ 1410.994] (II) This device may have been added with another device file. [ 1410.995] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10) [ 1410.995] (II) No input driver specified, ignoring this device. [ 1410.995] (II) This device may have been added with another device file. [ 1410.996] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11) [ 1410.996] (II) No input driver specified, ignoring this device. [ 1410.996] (II) This device may have been added with another device file. [ 1410.996] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12) [ 1410.996] (II) No input driver specified, ignoring this device. [ 1410.996] (II) This device may have been added with another device file. [ 1410.997] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event13) [ 1410.997] (II) No input driver specified, ignoring this device. [ 1410.997] (II) This device may have been added with another device file. [ 1410.998] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6) [ 1410.998] (II) No input driver specified, ignoring this device. [ 1410.998] (II) This device may have been added with another device file. [ 1410.998] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7) [ 1410.998] (II) No input driver specified, ignoring this device. [ 1410.998] (II) This device may have been added with another device file. [ 1410.999] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8) [ 1410.999] (II) No input driver specified, ignoring this device. [ 1410.999] (II) This device may have been added with another device file. [ 1410.999] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9) [ 1410.999] (II) No input driver specified, ignoring this device. [ 1410.999] (II) This device may have been added with another device file. [ 1411.000] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5) [ 1411.000] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 1411.001] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 18 paused 0 [ 1411.001] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys' [ 1411.001] (**) Eee PC WMI hotkeys: always reports core events [ 1411.001] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event5" [ 1411.001] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0 [ 1411.001] (--) evdev: Eee PC WMI hotkeys: Found keys [ 1411.001] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard [ 1411.001] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input13/event5" [ 1411.001] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 8) [ 1411.001] (**) Option "xkb_rules" "evdev" [ 1411.001] (**) Option "xkb_model" "pc105" [ 1411.001] (**) Option "xkb_layout" "es" [ 1411.002] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1411.003] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 1411.003] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 1411.004] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0 [ 1411.004] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 1411.004] (**) AT Translated Set 2 keyboard: always reports core events [ 1411.004] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 1411.004] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 1411.004] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 1411.004] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 1411.004] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 1411.004] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 1411.004] (**) Option "xkb_rules" "evdev" [ 1411.004] (**) Option "xkb_model" "pc105" [ 1411.004] (**) Option "xkb_layout" "es" [ 1411.004] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1411.005] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event1) [ 1411.005] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 1411.005] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 20 paused 0 [ 1411.005] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse' [ 1411.006] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events [ 1411.006] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event1" [ 1411.006] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6 [ 1411.006] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons [ 1411.006] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s) [ 1411.006] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes [ 1411.006] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes [ 1411.006] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse [ 1411.006] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support [ 1411.006] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 1411.006] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 1411.006] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [ 1411.006] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 10) [ 1411.006] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes. [ 1411.006] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1 [ 1411.006] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0 [ 1411.006] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000 [ 1411.006] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4 [ 1411.006] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0) [ 1411.006] (II) No input driver specified, ignoring this device. [ 1411.006] (II) This device may have been added with another device file. [ 1411.007] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 1411.007] (II) No input driver specified, ignoring this device. [ 1411.007] (II) This device may have been added with another device file. [ 1411.261] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1434 [ 1411.261] (II) NOUVEAU(0): Using EDID range info for horizontal sync [ 1411.261] (II) NOUVEAU(0): Using EDID range info for vertical refresh [ 1411.261] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 1411.261] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1411.261] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1411.261] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1412.658] (II) AIGLX: Suspending AIGLX clients for VT switch [ 1412.658] (II) NOUVEAU(0): NVLeaveVT is called. [ 1412.659] (II) systemd-logind: got pause for 13:66 [ 1412.659] (II) systemd-logind: got pause for 13:67 [ 1412.659] (II) systemd-logind: got pause for 226:0 [ 1412.659] (II) systemd-logind: got pause for 13:64 [ 1412.659] (II) systemd-logind: got pause for 13:69 [ 1412.659] (II) systemd-logind: got pause for 13:65 [ 1421.164] (II) systemd-logind: got resume for 13:66 [ 1421.176] (II) systemd-logind: got resume for 13:67 [ 1421.204] (II) systemd-logind: got resume for 226:0 [ 1421.204] (II) AIGLX: Resuming AIGLX clients after VT switch [ 1421.204] (II) NOUVEAU(0): NVEnterVT is called. [ 1421.277] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1434 [ 1421.277] (II) NOUVEAU(0): Using hsync ranges from config file [ 1421.277] (II) NOUVEAU(0): Using vrefresh ranges from config file [ 1421.277] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 1421.277] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1421.277] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1421.277] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1421.278] (II) systemd-logind: got resume for 13:64 [ 1421.278] (II) systemd-logind: got resume for 13:69 [ 1421.278] (II) systemd-logind: got resume for 13:65 [ 1422.448] (II) AIGLX: Suspending AIGLX clients for VT switch [ 1422.448] (II) NOUVEAU(0): NVLeaveVT is called. [ 1422.449] (II) systemd-logind: got pause for 13:66 [ 1422.449] (II) systemd-logind: got pause for 13:67 [ 1422.449] (II) systemd-logind: got pause for 226:0 [ 1422.449] (II) systemd-logind: got pause for 13:64 [ 1422.450] (II) systemd-logind: got pause for 13:69 [ 1422.450] (II) systemd-logind: got pause for 13:65 [ 1424.896] (II) systemd-logind: got resume for 13:66 [ 1424.912] (II) systemd-logind: got resume for 13:67 [ 1424.912] (II) systemd-logind: got resume for 226:0 [ 1424.912] (II) AIGLX: Resuming AIGLX clients after VT switch [ 1424.912] (II) NOUVEAU(0): NVEnterVT is called. [ 1424.993] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1434 [ 1424.994] (II) NOUVEAU(0): Using hsync ranges from config file [ 1424.994] (II) NOUVEAU(0): Using vrefresh ranges from config file [ 1424.994] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 1424.994] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1424.994] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1424.994] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1424.995] (II) systemd-logind: got resume for 13:64 [ 1424.995] (II) systemd-logind: got resume for 13:69 [ 1425.002] (II) systemd-logind: got resume for 13:65 [ 1426.004] (II) AIGLX: Suspending AIGLX clients for VT switch [ 1426.004] (II) NOUVEAU(0): NVLeaveVT is called. [ 1426.005] (II) systemd-logind: got pause for 13:66 [ 1426.005] (II) systemd-logind: got pause for 13:67 [ 1426.005] (II) systemd-logind: got pause for 226:0 [ 1426.005] (II) systemd-logind: got pause for 13:64 [ 1426.006] (II) systemd-logind: got pause for 13:69 [ 1426.006] (II) systemd-logind: got pause for 13:65 [ 1446.600] (II) systemd-logind: got resume for 13:66 [ 1446.612] (II) systemd-logind: got resume for 13:67 [ 1446.612] (II) systemd-logind: got resume for 226:0 [ 1446.612] (II) AIGLX: Resuming AIGLX clients after VT switch [ 1446.612] (II) NOUVEAU(0): NVEnterVT is called. [ 1446.694] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1434 [ 1446.694] (II) NOUVEAU(0): Using hsync ranges from config file [ 1446.694] (II) NOUVEAU(0): Using vrefresh ranges from config file [ 1446.694] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 1446.694] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1446.695] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1446.695] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1446.695] (II) systemd-logind: got resume for 13:64 [ 1446.695] (II) systemd-logind: got resume for 13:69 [ 1446.696] (II) systemd-logind: got resume for 13:65
[ 1426.251] X.Org X Server 1.17.3 Release Date: 2015-10-26 [ 1426.251] X Protocol Version 11, Revision 0 [ 1426.251] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 1426.251] Current Operating System: Linux uguindo 4.3.0-1-amd64 #1 SMP Debian 4.3.3-7 (2016-01-19) x86_64 [ 1426.251] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0-1-amd64 root=/dev/mapper/debian-testing ro quiet [ 1426.251] Build Date: 27 October 2015 11:41:02PM [ 1426.251] xorg-server 2:1.17.3-2 (http://www.debian.org/support) [ 1426.251] Current version of pixman: 0.33.6 [ 1426.251] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1426.251] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1426.251] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 27 15:28:48 2016 [ 1426.251] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 1426.252] (==) No Layout section. Using the first Screen section. [ 1426.252] (==) No screen section available. Using defaults. [ 1426.252] (**) |-->Screen "Default Screen Section" (0) [ 1426.252] (**) | |-->Monitor "<default monitor>" [ 1426.252] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 1426.252] (==) Automatically adding devices [ 1426.252] (==) Automatically enabling devices [ 1426.252] (==) Automatically adding GPU devices [ 1426.252] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 1426.252] Entry deleted from font path. [ 1426.252] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 1426.252] (==) ModulePath set to "/usr/lib/xorg/modules" [ 1426.252] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 1426.252] (II) Loader magic: 0x5621840c9de0 [ 1426.252] (II) Module ABI versions: [ 1426.252] X.Org ANSI C Emulation: 0.4 [ 1426.252] X.Org Video Driver: 19.0 [ 1426.252] X.Org XInput driver : 21.0 [ 1426.252] X.Org Server Extension : 9.0 [ 1426.253] (EE) systemd-logind: failed to get session: PID 5345 does not belong to any known session [ 1426.254] (II) xfree86: Adding drm device (/dev/dri/card0) [ 1426.295] (--) PCI:*(0:1:0:0) 10de:104a:1043:8460 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 1426.295] (II) LoadModule: "glx" [ 1426.295] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 1426.298] (II) Module glx: vendor="X.Org Foundation" [ 1426.298] compiled for 1.17.3, module version = 1.0.0 [ 1426.298] ABI class: X.Org Server Extension, version 9.0 [ 1426.298] (==) AIGLX enabled [ 1426.298] (==) Matched nouveau as autoconfigured driver 0 [ 1426.298] (==) Matched nv as autoconfigured driver 1 [ 1426.298] (==) Matched nouveau as autoconfigured driver 2 [ 1426.298] (==) Matched nv as autoconfigured driver 3 [ 1426.298] (==) Matched modesetting as autoconfigured driver 4 [ 1426.298] (==) Matched fbdev as autoconfigured driver 5 [ 1426.298] (==) Matched vesa as autoconfigured driver 6 [ 1426.298] (==) Assigned the driver to the xf86ConfigLayout [ 1426.298] (II) LoadModule: "nouveau" [ 1426.298] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 1426.298] (II) Module nouveau: vendor="X.Org Foundation" [ 1426.298] compiled for 1.17.3, module version = 1.0.12 [ 1426.298] Module class: X.Org Video Driver [ 1426.298] ABI class: X.Org Video Driver, version 19.0 [ 1426.298] (II) LoadModule: "nv" [ 1426.299] (WW) Warning, couldn't open module nv [ 1426.299] (II) UnloadModule: "nv" [ 1426.299] (II) Unloading nv [ 1426.299] (EE) Failed to load module "nv" (module does not exist, 0) [ 1426.299] (II) LoadModule: "modesetting" [ 1426.299] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 1426.299] (II) Module modesetting: vendor="X.Org Foundation" [ 1426.299] compiled for 1.17.3, module version = 1.17.3 [ 1426.299] Module class: X.Org Video Driver [ 1426.299] ABI class: X.Org Video Driver, version 19.0 [ 1426.299] (II) LoadModule: "fbdev" [ 1426.299] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 1426.299] (II) Module fbdev: vendor="X.Org Foundation" [ 1426.299] compiled for 1.17.1, module version = 0.4.4 [ 1426.299] Module class: X.Org Video Driver [ 1426.299] ABI class: X.Org Video Driver, version 19.0 [ 1426.299] (II) LoadModule: "vesa" [ 1426.299] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 1426.299] (II) Module vesa: vendor="X.Org Foundation" [ 1426.299] compiled for 1.17.3, module version = 2.3.4 [ 1426.299] Module class: X.Org Video Driver [ 1426.299] ABI class: X.Org Video Driver, version 19.0 [ 1426.299] (II) NOUVEAU driver Date: Tue Dec 8 15:52:25 2015 +1000 [ 1426.299] (II) NOUVEAU driver for NVIDIA chipset families : [ 1426.299] RIVA TNT (NV04) [ 1426.299] RIVA TNT2 (NV05) [ 1426.299] GeForce 256 (NV10) [ 1426.300] GeForce 2 (NV11, NV15) [ 1426.300] GeForce 4MX (NV17, NV18) [ 1426.300] GeForce 3 (NV20) [ 1426.300] GeForce 4Ti (NV25, NV28) [ 1426.300] GeForce FX (NV3x) [ 1426.300] GeForce 6 (NV4x) [ 1426.300] GeForce 7 (G7x) [ 1426.300] GeForce 8 (G8x) [ 1426.300] GeForce GTX 200 (NVA0) [ 1426.300] GeForce GTX 400 (NVC0) [ 1426.300] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 1426.300] (II) FBDEV: driver for framebuffer: fbdev [ 1426.300] (II) VESA: driver for VESA chipsets: vesa [ 1426.300] (++) using VT number 7 [ 1426.303] (II) [drm] nouveau interface version: 1.3.0 [ 1426.303] (WW) Falling back to old probe method for modesetting [ 1426.303] (WW) Falling back to old probe method for fbdev [ 1426.303] (II) Loading sub module "fbdevhw" [ 1426.303] (II) LoadModule: "fbdevhw" [ 1426.303] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 1426.303] (II) Module fbdevhw: vendor="X.Org Foundation" [ 1426.303] compiled for 1.17.3, module version = 0.0.2 [ 1426.303] ABI class: X.Org Video Driver, version 19.0 [ 1426.303] (WW) Falling back to old probe method for vesa [ 1426.304] (II) Loading sub module "dri2" [ 1426.304] (II) LoadModule: "dri2" [ 1426.304] (II) Module "dri2" already built-in [ 1426.304] (--) NOUVEAU(0): Chipset: "NVIDIA NVD9" [ 1426.304] (II) NOUVEAU(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 1426.304] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 1426.304] (==) NOUVEAU(0): RGB weight 888 [ 1426.304] (==) NOUVEAU(0): Default visual is TrueColor [ 1426.304] (==) NOUVEAU(0): Using HW cursor [ 1426.304] (==) NOUVEAU(0): Allowed maximum DRI level 2. [ 1426.304] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 1426.304] (==) NOUVEAU(0): Page flipping enabled [ 1426.304] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 1426.304] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 1426.304] (II) NOUVEAU(0): Initializing outputs ... [ 1426.316] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section [ 1426.318] (II) NOUVEAU(0): Output HDMI-1 has no monitor section [ 1426.359] (II) NOUVEAU(0): Output VGA-1 has no monitor section [ 1426.359] (II) NOUVEAU(0): 3 crtcs needed for screen. [ 1426.360] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 1426.360] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 1426.373] (II) NOUVEAU(0): EDID for output DVI-I-1 [ 1426.374] (II) NOUVEAU(0): EDID for output HDMI-1 [ 1426.415] (II) NOUVEAU(0): EDID for output VGA-1 [ 1426.416] (II) NOUVEAU(0): Manufacturer: SAM Model: 59a Serial#: 1129132594 [ 1426.416] (II) NOUVEAU(0): Year: 2010 Week: 11 [ 1426.416] (II) NOUVEAU(0): EDID Version: 1.3 [ 1426.416] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 1426.416] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen [ 1426.416] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48 vert.: 27 [ 1426.416] (II) NOUVEAU(0): Gamma: 2.20 [ 1426.416] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display [ 1426.416] (II) NOUVEAU(0): First detailed timing is preferred mode [ 1426.416] (II) NOUVEAU(0): redX: 0.648 redY: 0.339 greenX: 0.292 greenY: 0.603 [ 1426.416] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.070 whiteX: 0.312 whiteY: 0.329 [ 1426.416] (II) NOUVEAU(0): Supported established timings: [ 1426.416] (II) NOUVEAU(0): 640x480@60Hz [ 1426.416] (II) NOUVEAU(0): 800x600@56Hz [ 1426.416] (II) NOUVEAU(0): 800x600@60Hz [ 1426.416] (II) NOUVEAU(0): 1024x768@60Hz [ 1426.416] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 1426.416] (II) NOUVEAU(0): Supported standard timings: [ 1426.416] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 1426.416] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 1426.416] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 1426.416] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 1426.416] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 1426.416] (II) NOUVEAU(0): Supported detailed timing: [ 1426.416] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 477 x 268 mm [ 1426.416] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 1426.416] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 1426.416] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz [ 1426.416] (II) NOUVEAU(0): Monitor name: SyncMaster [ 1426.416] (II) NOUVEAU(0): Serial No: HMFZ300654 [ 1426.416] (II) NOUVEAU(0): EDID (in hex): [ 1426.416] (II) NOUVEAU(0): 00ffffffffffff004c2d9a0532324d43 [ 1426.416] (II) NOUVEAU(0): 0b1401030e301b782a3d81a6564a9a24 [ 1426.416] (II) NOUVEAU(0): 1250542308008100814081809500b300 [ 1426.416] (II) NOUVEAU(0): 010101010101023a801871382d40582c [ 1426.416] (II) NOUVEAU(0): 4500dd0c1100001e000000fd00383d1e [ 1426.416] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053 [ 1426.416] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff [ 1426.416] (II) NOUVEAU(0): 00484d465a3330303635340a20200028 [ 1426.416] (II) NOUVEAU(0): Printing probed modes for output VGA-1 [ 1426.416] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1426.416] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1426.416] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1426.416] (II) NOUVEAU(0): Output DVI-I-1 disconnected [ 1426.416] (II) NOUVEAU(0): Output HDMI-1 disconnected [ 1426.416] (II) NOUVEAU(0): Output VGA-1 connected [ 1426.416] (II) NOUVEAU(0): Using exact sizes for initial modes [ 1426.416] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080 [ 1426.416] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1426.416] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0) [ 1426.417] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 1426.417] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1426.417] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz [ 1426.417] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1426.417] (==) NOUVEAU(0): DPI set to (96, 96) [ 1426.417] (II) Loading sub module "fb" [ 1426.417] (II) LoadModule: "fb" [ 1426.417] (II) Loading /usr/lib/xorg/modules/libfb.so [ 1426.417] (II) Module fb: vendor="X.Org Foundation" [ 1426.417] compiled for 1.17.3, module version = 1.0.0 [ 1426.417] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1426.417] (II) Loading sub module "shadowfb" [ 1426.417] (II) LoadModule: "shadowfb" [ 1426.417] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 1426.418] (II) Module shadowfb: vendor="X.Org Foundation" [ 1426.418] compiled for 1.17.3, module version = 1.0.0 [ 1426.418] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1426.418] (II) UnloadModule: "modesetting" [ 1426.418] (II) Unloading modesetting [ 1426.418] (II) UnloadModule: "fbdev" [ 1426.418] (II) Unloading fbdev [ 1426.418] (II) UnloadSubModule: "fbdevhw" [ 1426.418] (II) Unloading fbdevhw [ 1426.418] (II) UnloadModule: "vesa" [ 1426.418] (II) Unloading vesa [ 1426.418] (--) Depth 24 pixmap format is 32 bpp [ 1426.446] (II) NOUVEAU(0): Channel setup complete. [ 1426.473] (II) NOUVEAU(0): [COPY] async initialised. [ 1426.473] (II) NOUVEAU(0): Hardware support for Present enabled [ 1426.474] (II) NOUVEAU(0): [DRI2] Setup complete [ 1426.474] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 1426.474] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 1426.474] (II) Loading sub module "exa" [ 1426.474] (II) LoadModule: "exa" [ 1426.474] (II) Loading /usr/lib/xorg/modules/libexa.so [ 1426.474] (II) Module exa: vendor="X.Org Foundation" [ 1426.474] compiled for 1.17.3, module version = 2.6.0 [ 1426.474] ABI class: X.Org Video Driver, version 19.0 [ 1426.474] (II) EXA(0): Driver allocated offscreen pixmaps [ 1426.474] (II) EXA(0): Driver registered support for the following operations: [ 1426.474] (II) Solid [ 1426.474] (II) Copy [ 1426.474] (II) Composite (RENDER acceleration) [ 1426.474] (II) UploadToScreen [ 1426.474] (II) DownloadFromScreen [ 1426.474] (==) NOUVEAU(0): Backing store enabled [ 1426.474] (==) NOUVEAU(0): Silken mouse enabled [ 1426.474] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 1426.474] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 1426.474] (==) NOUVEAU(0): DPMS enabled [ 1426.474] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 1426.475] (--) RandR disabled [ 1426.479] (II) SELinux: Disabled on system [ 1426.523] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 1426.523] (II) AIGLX: enabled GLX_ARB_create_context [ 1426.523] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 1426.523] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 1426.523] (II) AIGLX: enabled GLX_INTEL_swap_event [ 1426.523] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 1426.523] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 1426.523] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 1426.523] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 1426.526] (II) AIGLX: Loaded and initialized nouveau [ 1426.526] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 1426.530] (II) NOUVEAU(0): NVEnterVT is called. [ 1426.555] (II) NOUVEAU(0): Setting screen physical size to 508 x 285 [ 1426.555] resize called 1920 1080 [ 1426.603] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 1426.603] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1426.603] (II) LoadModule: "evdev" [ 1426.603] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 1426.603] (II) Module evdev: vendor="X.Org Foundation" [ 1426.603] compiled for 1.16.4, module version = 2.9.2 [ 1426.603] Module class: X.Org XInput Driver [ 1426.603] ABI class: X.Org XInput driver, version 21.0 [ 1426.603] (II) Using input driver 'evdev' for 'Power Button' [ 1426.603] (**) Power Button: always reports core events [ 1426.603] (**) evdev: Power Button: Device: "/dev/input/event3" [ 1426.603] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1426.603] (--) evdev: Power Button: Found keys [ 1426.603] (II) evdev: Power Button: Configuring as keyboard [ 1426.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" [ 1426.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 1426.603] (**) Option "xkb_rules" "evdev" [ 1426.603] (**) Option "xkb_model" "pc105" [ 1426.603] (**) Option "xkb_layout" "es" [ 1426.603] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1426.618] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 1426.618] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1426.618] (II) Using input driver 'evdev' for 'Power Button' [ 1426.618] (**) Power Button: always reports core events [ 1426.618] (**) evdev: Power Button: Device: "/dev/input/event2" [ 1426.618] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1426.618] (--) evdev: Power Button: Found keys [ 1426.618] (II) evdev: Power Button: Configuring as keyboard [ 1426.618] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2" [ 1426.618] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 1426.618] (**) Option "xkb_rules" "evdev" [ 1426.618] (**) Option "xkb_model" "pc105" [ 1426.618] (**) Option "xkb_layout" "es" [ 1426.618] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1426.618] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14) [ 1426.618] (II) No input driver specified, ignoring this device. [ 1426.618] (II) This device may have been added with another device file. [ 1426.619] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15) [ 1426.619] (II) No input driver specified, ignoring this device. [ 1426.619] (II) This device may have been added with another device file. [ 1426.619] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10) [ 1426.619] (II) No input driver specified, ignoring this device. [ 1426.619] (II) This device may have been added with another device file. [ 1426.619] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11) [ 1426.619] (II) No input driver specified, ignoring this device. [ 1426.619] (II) This device may have been added with another device file. [ 1426.619] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12) [ 1426.619] (II) No input driver specified, ignoring this device. [ 1426.619] (II) This device may have been added with another device file. [ 1426.619] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event13) [ 1426.620] (II) No input driver specified, ignoring this device. [ 1426.620] (II) This device may have been added with another device file. [ 1426.620] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6) [ 1426.620] (II) No input driver specified, ignoring this device. [ 1426.620] (II) This device may have been added with another device file. [ 1426.620] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7) [ 1426.620] (II) No input driver specified, ignoring this device. [ 1426.620] (II) This device may have been added with another device file. [ 1426.620] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8) [ 1426.620] (II) No input driver specified, ignoring this device. [ 1426.620] (II) This device may have been added with another device file. [ 1426.620] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9) [ 1426.620] (II) No input driver specified, ignoring this device. [ 1426.620] (II) This device may have been added with another device file. [ 1426.621] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5) [ 1426.621] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 1426.621] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys' [ 1426.621] (**) Eee PC WMI hotkeys: always reports core events [ 1426.621] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event5" [ 1426.621] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0 [ 1426.621] (--) evdev: Eee PC WMI hotkeys: Found keys [ 1426.621] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard [ 1426.621] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input13/event5" [ 1426.621] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 8) [ 1426.621] (**) Option "xkb_rules" "evdev" [ 1426.621] (**) Option "xkb_model" "pc105" [ 1426.621] (**) Option "xkb_layout" "es" [ 1426.621] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1426.621] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 1426.621] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 1426.621] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 1426.621] (**) AT Translated Set 2 keyboard: always reports core events [ 1426.621] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 1426.621] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 1426.621] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 1426.621] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 1426.621] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 1426.621] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 1426.621] (**) Option "xkb_rules" "evdev" [ 1426.621] (**) Option "xkb_model" "pc105" [ 1426.621] (**) Option "xkb_layout" "es" [ 1426.621] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1426.622] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event1) [ 1426.622] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 1426.622] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse' [ 1426.622] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events [ 1426.622] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event1" [ 1426.622] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6 [ 1426.622] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons [ 1426.622] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s) [ 1426.622] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes [ 1426.622] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes [ 1426.622] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse [ 1426.622] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support [ 1426.622] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 1426.622] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 1426.622] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [ 1426.622] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 10) [ 1426.622] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes. [ 1426.622] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1 [ 1426.622] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0 [ 1426.622] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000 [ 1426.622] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4 [ 1426.622] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0) [ 1426.622] (II) No input driver specified, ignoring this device. [ 1426.622] (II) This device may have been added with another device file. [ 1426.623] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 1426.623] (II) No input driver specified, ignoring this device. [ 1426.623] (II) This device may have been added with another device file. [ 1429.860] (II) AIGLX: Suspending AIGLX clients for VT switch [ 1429.860] (II) NOUVEAU(0): NVLeaveVT is called.
Attachment:
Xorg.0.log.old
Description: application/trash