xorg-docs: Changes to 'debian-unstable'
ChangeLog | 137 ++++++++
MAINTAINERS | 41 ++
autogen.sh | 5
configure.ac | 3
debian/README.source | 24 -
debian/changelog | 12
debian/compat | 2
debian/control | 10
debian/rules | 85 -----
debian/upstream/signing-key.asc | 60 +++
debian/watch | 1
debian/xsfbs/repack.sh | 32 --
debian/xsfbs/xsfbs-autoreconf.mk | 150 ---------
debian/xsfbs/xsfbs.mk | 285 -----------------
debian/xsfbs/xsfbs.sh | 622 ---------------------------------------
general/ReleaseNotes.xml | 4
general/input/XKB-Config.xml | 2
general/input/XKB-Enhancing.xml | 4
man/Consortium.man | 2
man/Standards.man | 2
man/X.man | 141 ++++----
man/Xsecurity.man | 2
specs/ICCCM/icccm.xml | 6
specs/XLFD/xlfd.xml | 2
specs/Xserver/XACE-Spec.xml | 4
specs/Xserver/analysis.xml | 8
specs/Xserver/appgroup.xml | 2
specs/Xserver/secint.xml | 4
28 files changed, 351 insertions(+), 1301 deletions(-)
New commits:
commit 78ae1784bc5ab185a0062647379fe4781a80a6a4
Author: Julien Cristau <jcristau@debian.org>
Date: Wed Oct 28 16:07:38 2015 +0000
Upload to unstable
diff --git a/debian/changelog b/debian/changelog
index ebf7b34..28f7c36 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,5 +1,6 @@
-xorg-docs (1:1.7.1-1) UNRELEASED; urgency=medium
+xorg-docs (1:1.7.1-1) unstable; urgency=medium
+ * Team upload.
* New upstream release.
* Let uscan verify tarball signatures.
* Remove Cyril from Uploaders.
@@ -7,7 +8,7 @@ xorg-docs (1:1.7.1-1) UNRELEASED; urgency=medium
* Switch to dh with the autoreconf and quilt addons.
* Get rid of debian/xsfbs/.
- -- Julien Cristau <jcristau@debian.org> Wed, 28 Oct 2015 15:51:03 +0000
+ -- Julien Cristau <jcristau@debian.org> Wed, 28 Oct 2015 16:07:28 +0000
xorg-docs (1:1.7-1) unstable; urgency=low
commit e9d1259769bad65a9e5e4dbef3f96b5beb61f5a5
Author: Julien Cristau <jcristau@debian.org>
Date: Wed Oct 28 15:57:33 2015 +0000
Get rid of debian/xsfbs/.
diff --git a/debian/README.source b/debian/README.source
index b09a1ab..4ecd5e6 100644
--- a/debian/README.source
+++ b/debian/README.source
@@ -47,27 +47,3 @@ are involved:
case, it appears directly in the .diff.gz.
* Otherwise, the patch is added to debian/patches/ which is managed
with quilt as documented in /usr/share/doc/quilt/README.source.
-
-quilt is actually invoked by the Debian X packaging through a larger
-set of scripts called XSFBS. XSFBS brings some other X specific
-features such as managing dependencies and conflicts due to the video
-and input driver ABIs.
-XSFBS itself is maintained in a separate repository at
- git://git.debian.org/pkg-xorg/xsfbs.git
-and it is pulled inside the other Debian X repositories when needed.
-
-The XSFBS patching system requires a build dependency on quilt. Also
-a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
-so that the XSFBS patching occurs before the actual build. So the
-very first target of the build (likely the one running autoreconf)
-should depend on $(STAMP_DIR)/patch. It should also not depend on
-anything so that parallel builds are correctly supported (nothing
-should probably run while patching is being done). And finally, the
-clean target should depend on the xsfclean target so that patches
-are unapplied on clean.
-
-When the upstream sources contain some DFSG-nonfree files, they are
-listed in text files in debian/prune/ in the "debian-*" branch of
-the Debian repository. XSFBS' scripts then take care of removing
-these listed files during the build so as to generate a modified
-DFSG-free .orig.tar.gz tarball.
diff --git a/debian/changelog b/debian/changelog
index 2d836ce..ebf7b34 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -5,6 +5,7 @@ xorg-docs (1:1.7.1-1) UNRELEASED; urgency=medium
* Remove Cyril from Uploaders.
* Bump Standards-Version to 3.9.6, update Vcs-* control fields.
* Switch to dh with the autoreconf and quilt addons.
+ * Get rid of debian/xsfbs/.
-- Julien Cristau <jcristau@debian.org> Wed, 28 Oct 2015 15:51:03 +0000
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
deleted file mode 100755
index 5935cc9..0000000
--- a/debian/xsfbs/repack.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
- exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
- exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
- exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
diff --git a/debian/xsfbs/xsfbs-autoreconf.mk b/debian/xsfbs/xsfbs-autoreconf.mk
deleted file mode 100644
index fc2fe62..0000000
--- a/debian/xsfbs/xsfbs-autoreconf.mk
+++ /dev/null
@@ -1,150 +0,0 @@
-#!/usr/bin/make -f
-# $Id: xsfbs-autoreconf.mk 2284 2006-06-06 18:02:50Z branden $
-
-# Automagical conversion of autoreconf results into quilt patches.
-
-# Copyright 2006 Eugene Konev
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# The idea behind this is storing changes produced by autoreconf as a
-# separate patch on quilt stack (on top of stack actually).
-# The only usable target here is 'autoreconf`. Other targets are not
-# supposed to be called directly. DO NOT invoke them, unless you know what
-# you are doing.
-# The autoreconf target will check if files with names in $(RECONF_CHECKFILES)
-# were changed during patching (from upstream version or from previously
-# autoreconfed version) and call actual autoreconfing if they were.
-# The actual autoreconfing target (doautoreconf) WILL FAIL after
-# calling autoreconf and pushing changes into quilt stack by design. It
-# should never be invoked by automatic build process.
-# The proposed use is adding autoreconf into clean's prerequisites before
-# xsfclean like:
-# - clean: xsfclean
-# + clean: autoreconf xsfclean
-# This will ensure it is called when you build package with dpkg-buildpackage.
-
-# This dir will be used for producing diff of autoreconfed tree
-RECONF_DIR := xsfautoreconf
-
-# This files will be checked for changes
-RECONF_CHECKFILES += configure.ac Makefile.am
-
-# This files will not be hardlinked but copied
-RECONF_NOLINKFILES += aclocal.m4
-
-# This files/dirs will be pruned after autoreconf run
-RECONF_PRUNEFILES += autom4te.cache config.h.in~ aclocal.m4~
-
-# Internal target. Never invoke directly.
-stampdir_target+=check.md5sum
-$(STAMP_DIR)/check.md5sum:
- dh_testdir
- $(MAKE) -f debian/rules prepare
- for F in $(RECONF_CHECKFILES); do \
- find . -wholename ./$(STAMP_DIR) -prune -o -name $$F -print | \
- LC_ALL=C sort | xargs --no-run-if-empty md5sum >>$@; \
- done
-
-# Internal target. Never invoke directly.
-$(STAMP_DIR)/clean.md5sum:
- dh_testdir
- $(MAKE) -f debian/rules unpatch
- rm -f $(STAMP_DIR)/check.md5sum
- $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
- mv $(STAMP_DIR)/check.md5sum $@
-
-# Internal target. Never invoke directly.
-debian/patches/patched.md5sum:
- dh_testdir
- [ -f $(STAMP_DIR)/clean.md5sum ] || \
- $(MAKE) -f debian/rules $(STAMP_DIR)/clean.md5sum
-
- $(MAKE) -f debian/rules patch
- rm -f $(STAMP_DIR)/check.md5sum
- $(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
- if ! diff $(STAMP_DIR)/clean.md5sum \
- $(STAMP_DIR)/check.md5sum > /dev/null; then \
- $(MAKE) -f debian/rules doautoreconf; \
- else \
- mv $(STAMP_DIR)/check.md5sum $@; \
- fi
-
-# Internal target. Never invoke directly.
-,PHONY: doautoreconf
-doautoreconf: patch
- quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1 || true
- if quilt applied | grep ^autoreconf.diff$$ > /dev/null; then \
- quilt pop -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- quilt rename -p autoreconf.diff autoreconf-old.diff \
- >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- quilt delete autoreconf-old.diff >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
- fi
-
- if [ -e $(RECONF_DIR) ]; then \
- echo "ERROR: $(RECONF_DIR) already exists. Cleanup by hand"; \
- exit 1; \
- fi
-
- mkdir -p $(RECONF_DIR)/before
- find . -maxdepth 1 -mindepth 1 ! -wholename ./$(RECONF_DIR) \
- -a ! -wholename ./debian -a ! -wholename ./patches \
- -a ! -wholename ./.pc -a ! -wholename ./$(STAMP_DIR) | \
- xargs -i{} cp -al {} $(RECONF_DIR)/before/
-
- for F in $(RECONF_PRUNEFILES); do \
- find $(RECONF_DIR)/before -name $$F -print | \
- xargs --no-run-if-empty rm -r; \
- done
-
- cp -al $(RECONF_DIR)/before $(RECONF_DIR)/after
-
- for F in $(RECONF_NOLINKFILES); do \
- find . -wholename ./$(RECONF_DIR) -prune -o -wholename ./debian \
- -prune -o -wholename ./$(STAMP_DIR) -prune -o -name $$F \
- -print | \
- xargs --no-run-if-empty -i{} cp --remove-destination {} \
- $(RECONF_DIR)/after/{}; \
- done
-
- cd $(RECONF_DIR)/after && autoreconf -v --install && \
- for F in $(RECONF_PRUNEFILES); do \
- find . -name $$F -print | \
- xargs --no-run-if-empty rm -r; \
- done
-
- cd $(RECONF_DIR) && diff -Nru before after > autoreconf.diff || true
-
- quilt import $(RECONF_DIR)/autoreconf.diff \
- >>$(STAMP_DIR)/log/autoreconf 2>&1
-
- mv $(STAMP_DIR)/check.md5sum debian/patches/patched.md5sum
-
- rm -r $(RECONF_DIR) && rm -f patches/autoreconf-old.diff
-
- @echo
- @echo "****************************************************************"
- @echo " This target is made to fail INTENTIONALLY. It should NEVER "
- @echo " be invoked during automatic builds. "
- @echo
- @echo " This target was invoked because you added/removed/changed "
- @echo " patches which modify either configure.ac or Makefile.am and, "
- @echo " thus, require autoreconf run. And all autoreconfing should "
- @echo " happen before uploading. "
- @echo
- @echo " (See also debian/xsfbs/xsfbs-autoreconf.mk) "
- @echo
- @echo " If you see this message, autoreconfing actually SUCCEEDED, "
- @echo " and your build should finish successfully, when rerun. "
- @echo "****************************************************************"
- @echo
- exit 1;
-
-.PHONY: autoreconf
-autoreconf: debian/patches/patched.md5sum patch $(STAMP_DIR)/check.md5sum
- if ! diff $(STAMP_DIR)/check.md5sum \
- debian/patches/patched.md5sum > /dev/null; then \
- $(MAKE) -f debian/rules doautoreconf; \
- fi
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
deleted file mode 100755
index 3c59c20..0000000
--- a/debian/xsfbs/xsfbs.mk
+++ /dev/null
@@ -1,285 +0,0 @@
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1000@debian.org>
-# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
-# Modified by Adam Heath <doogie@debian.org>
-# Modified by Branden Robinson <branden@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
-# Modified by David Nusinow <dnusinow@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the codename of a release in the Debian part of the
-# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
- ARCH:=$(ARCH)
- else
- ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-# 1) A target name that is invoked by a package-building tool or the user.
-# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-# 2) A line delcaring 1) as a phony target (".PHONY:").
-# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-# depend on other targets.
-# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-# "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir". Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again. Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
- mkdir $(STAMP_DIR)
- >$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/logdir $(STAMP_DIR)/genscripts
- >$@
-
-.PHONY: logdir
-stampdir_targets+=logdir
-logdir: $(STAMP_DIR)/logdir
-$(STAMP_DIR)/logdir: $(STAMP_DIR)/stampdir
- mkdir -p $(STAMP_DIR)/log
- >$@
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
- if ! [ `which quilt` ]; then \
- echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
- exit 1; \
- fi; \
- if $(QUILT) next >/dev/null 2>&1; then \
- echo -n "Applying patches..."; \
- if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
- cat $(STAMP_DIR)/log/patch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/patch; \
- echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "No patches to apply"; \
- fi; \
- >$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/logdir
- rm -f $(STAMP_DIR)/patch
- @echo -n "Unapplying patches..."; \
- if $(QUILT) applied >/dev/null 2>/dev/null; then \
- if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "nothing to do."; \
- fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
- rm -f $(STAMP_DIR)/genscripts
- rm -f debian/*.config \
- debian/*.postinst \
- debian/*.postrm \
- debian/*.preinst \
- debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
- dh_testdir
- rm -rf .pc
- rm -rf $(STAMP_DIR)
- dh_clean
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems. It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
- # Ensure we're in the correct directory.
- dh_testdir
- grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
- @echo -n "Auditing patches..."; \
- >$(STAMP_DIR)/log/patch; \
- FUZZY=; \
- while [ -n "$$($(QUILT) next)" ]; do \
- RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
- case "$$RESULT" in \
- succeeded) \
- echo "fuzzy patch: $$($(QUILT) top)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
- FUZZY=yes; \
- ;; \
- FAILED) \
- echo "broken patch: $$($(QUILT) next)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
- exit 1; \
- ;; \
- esac; \
- done; \
- if [ -n "$$FUZZY" ]; then \
- echo "there were fuzzy patches; please fix."; \
- exit 1; \
- else \
- echo "done."; \
- fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
- for FILE in debian/*.config.in \
- debian/*.postinst.in \
- debian/*.postrm.in \
- debian/*.preinst.in \
- debian/*.prerm.in; do \
- if [ -e "$$FILE" ]; then \
- MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
- sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
- cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
- sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
- sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
- -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
- <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
- rm $$MAINTSCRIPT.tmp; \
- fi; \
- done
- # Validate syntax of generated shell scripts.
- #sh debian/scripts/validate-posix-sh debian/*.config \
- # debian/*.postinst \
- # debian/*.postrm \
- # debian/*.preinst \
- # debian/*.prerm
- >$@
-
-# Compute dependencies for drivers
-#
-VIDEODEP = $(shell cat /usr/share/xserver-xorg/videodrvdep 2>/dev/null)
-INPUTDEP = $(shell cat /usr/share/xserver-xorg/xinputdep 2>/dev/null)
-
-# these two can be removed post-squeeze
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI), xorg-driver-video
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI), xorg-driver-input
-
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(VIDEODEP),)
- @echo 'error: xserver-xorg-dev >= 1.7.6.901 needs to be installed'
- @exit 1
-else
- echo "xviddriver:Depends=$(VIDEODEP)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Depends=$(INPUTDEP)" >> debian/$(PACKAGE).substvars
- # the following is there for compatibility...
- echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xserver:Depends=$(VIDEODEP), $(INPUTDEP)" >> debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
deleted file mode 100644
index 813fd8d..0000000
--- a/debian/xsfbs/xsfbs.sh
+++ /dev/null
@@ -1,622 +0,0 @@
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts. It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper operation
-# of those functions. By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
- DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
- DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
- RECONFIGURE="true"
-else
- RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
- FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
- UPGRADE="yes"
-fi
-
-trap "message;\
- message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
- message;\
- exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
- # syntax: reject_nondigits [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters other than decimal digits and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain anything but digits?
- if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- # can't use die(), because it wraps message() which wraps this function
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-reject_unlikely_path_chars () {
- # syntax: reject_unlikely_path_chars [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters unlikely to be seen in a path and which the shell might
- # interpret and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain any funny characters?
- if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
- "encountered possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user. This is used only as a fallback in the
-# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- DEFCOLUMNS=80
-fi
-
-message () {
- # pretty-print messages of arbitrary length
- reject_nondigits "$COLUMNS"
- echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
- # syntax: observe message ...
- #
- # issue observational message suitable for logging someday when support for
- # it exists in dpkg
- if [ -n "$DEBUG_XORG_PACKAGE" ]; then
- message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
- fi
-}
-
-warn () {
- # syntax: warn message ...
- #
- # issue warning message suitable for logging someday when support for
- # it exists in dpkg; also send to standard error
- message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
- # syntax: die message ...
- #
- # exit script with error message
- message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
- exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
- # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
- message "internal error: $*"
- if [ -n "$OFFICIAL_BUILD" ]; then
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- fi
- exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
- message "usage error: $*"
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- exit $SHELL_LIB_USAGE_ERROR
-}
-
-font_update () {
- # run $UPDATECMDS in $FONTDIRS
-
- local dir cmd shortcmd x_font_dir_prefix
-
- x_font_dir_prefix="/usr/share/fonts/X11"
-
- if [ -z "$UPDATECMDS" ]; then
- usage_error "font_update() called but \$UPDATECMDS not set"
- fi
- if [ -z "$FONTDIRS" ]; then
- usage_error "font_update() called but \$FONTDIRS not set"
- fi
-
- reject_unlikely_path_chars "$UPDATECMDS"
- reject_unlikely_path_chars "$FONTDIRS"
-
- for dir in $FONTDIRS; do
- if [ -d "$x_font_dir_prefix/$dir" ]; then
- for cmd in $UPDATECMDS; do
- if which "$cmd" > /dev/null 2>&1; then
- shortcmd=${cmd##*/}
- observe "running $shortcmd in $dir font directory"
- cmd_opts=
- if [ "$shortcmd" = "update-fonts-alias" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-dir" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-scale" ]; then
- cmd_opts=--x11r7-layout
- fi
- $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
- "failed; font directory data may not" \
- "be up to date"
- else
- warn "$cmd not found; not updating corresponding $dir font" \
- "directory data"
- fi
- done
- else
- warn "$dir is not a directory; not updating font directory data"
- fi
- done
-}
-
-remove_conffile_prepare () {
- # syntax: remove_conffile_prepare filename official_md5sum ...
- #
- # Check a conffile "filename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 2 ]; then
- usage_error "remove_conffile_prepare() called with wrong number of" \
- "arguments; expected at least 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
- shift
-
- # does the conffile even exist?
- if [ -e "$conffile" ]; then
- # calculate its checksum
- current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
- # compare it to each supplied checksum
- while [ -n "$1" ]; do
- if [ "$current_checksum" = "$1" ]; then
- # we found a match; move the confffile and stop looking
- observe "preparing obsolete conffile $conffile for removal"
- mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
- break
- fi
- shift
- done
- fi
-}
-
-remove_conffile_lookup () {
- # syntax: remove_conffile_lookup package filename
- #
- # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
- # if it matches the actual file's md5sum.
- #
- # Call this function when you would call remove_conffile_prepare but only
- # want to check against dpkg's status database instead of known checksums.
-
- local package conffile old_md5sum
-
- # validate arguments
- if [ $# -ne 2 ]; then
- usage_error "remove_conffile_lookup() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- package="$1"
- conffile="$2"
-
- if ! [ -e "$conffile" ]; then
- return
- fi
- old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
- awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
- if [ -n "$old_md5sum" ]; then
- remove_conffile_prepare "$conffile" "$old_md5sum"
- fi
-}
-
-remove_conffile_commit () {
- # syntax: remove_conffile_commit filename
- #
- # Complete the removal of a conffile "filename" that has become obsolete.
- #
- # Call this function from a postinst script after having used
- # remove_conffile_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_commit() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, remove it
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "committing removal of obsolete conffile $conffile"
- rm "$conffile.$THIS_PACKAGE-tmp"
- fi
-}
-
-remove_conffile_rollback () {
- # syntax: remove_conffile_rollback filename
- #
- # Roll back the removal of a conffile "filename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" is after having used remove_conffile_prepare() in the
- # preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_rollback() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, move it
- # back
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "rolling back removal of obsolete conffile $conffile"
- mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
- fi
-}
-
-replace_conffile_with_symlink_prepare () {
- # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
- # official_md5sum ...
- #
- # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails. Otherwise copy it
- # to newfilename and let dpkg handle it through conffiles mechanism.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 3 ]; then
- usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
- " number of arguments; expected at least 3, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- oldconffile="$1"
- shift
- newconffile="$1"
- shift
-
- remove_conffile_prepare "$_oldconffile" "$@"
- # If $oldconffile still exists, then md5sums didn't match.
- # Copy it to new one.
- if [ -f "$oldconffile" ]; then
- cp "$oldconffile" "$newconffile"
- fi
-
-}
-
-replace_conffile_with_symlink_commit () {
- # syntax: replace_conffile_with_symlink_commit oldfilename
- #
Reply to: