Your message dated Thu, 15 Oct 2015 14:58:05 +0100 with message-id <1444917485.3900.2.camel@robots.org.uk> and subject line Not seen for a long time has caused the Debian Bug report #617608, regarding /usr/bin/Xorg: infinite loop after resuming virtualbox VM to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 617608: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=617608 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: /usr/bin/Xorg: infinite loop after resuming virtualbox VM
- From: Sam Morris <sam@robots.org.uk>
- Date: Wed, 09 Mar 2011 21:57:21 +0000
- Message-id: <20110309215721.2194.70708.reportbug@wintermute>
Package: xserver-xorg-core Version: 2:1.9.4.901-1 Severity: important File: /usr/bin/Xorg -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I suspended and then resumed my Virtualbox virtual machine, and the server froze. - -- Package-specific info: X server symlink status: - ------------------------ lrwxrwxrwx 1 root root 13 May 22 2009 /etc/X11/X -> /usr/bin/Xorg - -rwxr-xr-x 1 root root 1926304 Mar 7 15:48 /usr/bin/Xorg VGA-compatible devices on PCI bus: - ---------------------------------- 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] Xorg X server configuration file status: - ---------------------------------------- - -rw-r--r-- 1 root root 1377 Jun 19 2010 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: - ------------------------------- #xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg #Section "Device" # Identifier "Some Device" # Driver "vboxvideo" #EndSection #Section "InputDevice" # Identifier "Some Mouse" # Driver "vboxmouse" # CorePointer only necessary if there is another mouse device (damn hotplug!) # Option "CorePointer" #EndSection #Section "Screen" # Identifier "Some Screen" # Device "Some Device" #SubSection "Display" # Modes not necessary when auto-resize x11 client is running #Modes "1920x1200" #EndSubSection #EndSection Section "ServerFlags" #Option "AutoAddDevices" "false" Option "AllowDeactivateGrabs" "true" Option "AllowClosedownGrabs" "true" EndSection # vim: sts=0 #Section "InputDevice" # Identifier "VBoxMouse" # Driver "vboxmouse" # Option "CorePointer" #EndSection /etc/X11/xorg.conf.d does not exist. /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): - ------------------------------- Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011 Xorg X server log files on system: - ---------------------------------- - -rw-r--r-- 1 root root 21009 Aug 22 2009 /var/log/Xorg.20.log - -rw-r--r-- 1 root root 27525 Aug 1 2010 /var/log/Xorg.1.log - -rw-r--r-- 1 root root 46895 Mar 9 21:51 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): - --------------------------------------------------------------------- [ 8.332] X.Org X Server 1.9.4 Release Date: 2011-02-04 [ 8.333] X Protocol Version 11, Revision 0 [ 8.333] Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian [ 8.333] Current Operating System: Linux wintermute 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 [ 8.333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=5b4ecb9d-aa51-41a0-833e-ffa702725bf5 ro console=ttyS0 console=tty0 quiet [ 8.333] Build Date: 20 February 2011 04:48:15AM [ 8.333] xorg-server 2:1.9.4-3 (Cyril Brulebois <kibi@debian.org>) [ 8.333] Current version of pixman: 0.21.4 [ 8.333] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 8.333] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 8.333] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 5 21:47:25 2011 [ 8.336] (==) Using config file: "/etc/X11/xorg.conf" [ 8.336] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 8.337] (==) No Layout section. Using the first Screen section. [ 8.337] (==) No screen section available. Using defaults. [ 8.337] (**) |-->Screen "Default Screen Section" (0) [ 8.337] (**) | |-->Monitor "<default monitor>" [ 8.337] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 8.338] (==) Automatically adding devices [ 8.338] (==) Automatically enabling devices [ 8.355] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 8.355] Entry deleted from font path. [ 8.379] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 8.379] (==) ModulePath set to "/usr/lib/xorg/modules" [ 8.379] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 8.379] (II) Loader magic: 0x7cfac0 [ 8.379] (II) Module ABI versions: [ 8.379] X.Org ANSI C Emulation: 0.4 [ 8.379] X.Org Video Driver: 8.0 [ 8.379] X.Org XInput driver : 11.0 [ 8.379] X.Org Server Extension : 4.0 [ 8.384] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/33554432 [ 8.384] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 8.384] (II) LoadModule: "extmod" [ 8.385] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 8.399] (II) Module extmod: vendor="X.Org Foundation" [ 8.399] compiled for 1.9.4, module version = 1.0.0 [ 8.399] Module class: X.Org Server Extension [ 8.399] ABI class: X.Org Server Extension, version 4.0 [ 8.399] (II) Loading extension SELinux [ 8.399] (II) Loading extension MIT-SCREEN-SAVER [ 8.399] (II) Loading extension XFree86-VidModeExtension [ 8.399] (II) Loading extension XFree86-DGA [ 8.399] (II) Loading extension DPMS [ 8.399] (II) Loading extension XVideo [ 8.399] (II) Loading extension XVideo-MotionCompensation [ 8.399] (II) Loading extension X-Resource [ 8.399] (II) LoadModule: "dbe" [ 8.399] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 8.400] (II) Module dbe: vendor="X.Org Foundation" [ 8.400] compiled for 1.9.4, module version = 1.0.0 [ 8.400] Module class: X.Org Server Extension [ 8.400] ABI class: X.Org Server Extension, version 4.0 [ 8.400] (II) Loading extension DOUBLE-BUFFER [ 8.400] (II) LoadModule: "glx" [ 8.400] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 8.405] (II) Module glx: vendor="X.Org Foundation" [ 8.405] compiled for 1.9.4, module version = 1.0.0 [ 8.405] ABI class: X.Org Server Extension, version 4.0 [ 8.405] (==) AIGLX enabled [ 8.405] (II) Loading extension GLX [ 8.408] (II) LoadModule: "record" [ 8.408] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 8.420] (II) Module record: vendor="X.Org Foundation" [ 8.420] compiled for 1.9.4, module version = 1.13.0 [ 8.420] Module class: X.Org Server Extension [ 8.420] ABI class: X.Org Server Extension, version 4.0 [ 8.420] (II) Loading extension RECORD [ 8.420] (II) LoadModule: "dri" [ 8.420] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 8.440] (II) Module dri: vendor="X.Org Foundation" [ 8.440] compiled for 1.9.4, module version = 1.0.0 [ 8.440] ABI class: X.Org Server Extension, version 4.0 [ 8.440] (II) Loading extension XFree86-DRI [ 8.440] (II) LoadModule: "dri2" [ 8.441] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 8.442] (II) Module dri2: vendor="X.Org Foundation" [ 8.442] compiled for 1.9.4, module version = 1.2.0 [ 8.442] ABI class: X.Org Server Extension, version 4.0 [ 8.442] (II) Loading extension DRI2 [ 8.442] (==) Matched vboxvideo as autoconfigured driver 0 [ 8.442] (==) Matched vesa as autoconfigured driver 1 [ 8.442] (==) Matched fbdev as autoconfigured driver 2 [ 8.442] (==) Assigned the driver to the xf86ConfigLayout [ 8.442] (II) LoadModule: "vboxvideo" [ 8.443] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so [ 8.465] (II) Module vboxvideo: vendor="Oracle Corporation" [ 8.465] compiled for 1.9.4, module version = 1.0.1 [ 8.465] Module class: X.Org Video Driver [ 8.465] ABI class: X.Org Video Driver, version 8.0 [ 8.465] (**) Load address of symbol "VBOXVIDEO" is 0x7f6bfe257260 [ 8.465] (II) LoadModule: "vesa" [ 8.466] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 8.482] (II) Module vesa: vendor="X.Org Foundation" [ 8.482] compiled for 1.9.4, module version = 2.3.0 [ 8.482] Module class: X.Org Video Driver [ 8.482] ABI class: X.Org Video Driver, version 8.0 [ 8.482] (II) LoadModule: "fbdev" [ 8.483] (WW) Warning, couldn't open module fbdev [ 8.483] (II) UnloadModule: "fbdev" [ 8.483] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 8.483] (II) VBoxVideo: guest driver for VirtualBox: vbox [ 8.483] (II) VESA: driver for VESA chipsets: vesa [ 8.483] (++) using VT number 7 [ 8.500] (WW) Falling back to old probe method for vesa [ 8.500] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.0.4_OSE [ 8.501] (II) Loading sub module "ramdac" [ 8.501] (II) LoadModule: "ramdac" [ 8.501] (II) Module "ramdac" already built-in [ 8.501] (II) Loading sub module "vbe" [ 8.501] (II) LoadModule: "vbe" [ 8.501] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 8.505] (II) Module vbe: vendor="X.Org Foundation" [ 8.505] compiled for 1.9.4, module version = 1.1.0 [ 8.505] ABI class: X.Org Video Driver, version 8.0 [ 8.505] (II) Loading sub module "fb" [ 8.505] (II) LoadModule: "fb" [ 8.505] (II) Loading /usr/lib/xorg/modules/libfb.so [ 8.529] (II) Module fb: vendor="X.Org Foundation" [ 8.529] compiled for 1.9.4, module version = 1.0.0 [ 8.529] ABI class: X.Org ANSI C Emulation, version 0.4 [ 8.529] (II) Loading sub module "shadowfb" [ 8.529] (II) LoadModule: "shadowfb" [ 8.529] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 8.530] (II) Module shadowfb: vendor="X.Org Foundation" [ 8.530] compiled for 1.9.4, module version = 1.0.0 [ 8.530] ABI class: X.Org ANSI C Emulation, version 0.4 [ 8.530] (II) Loading sub module "vgahw" [ 8.530] (II) LoadModule: "vgahw" [ 8.530] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 8.530] (II) Module vgahw: vendor="X.Org Foundation" [ 8.530] compiled for 1.9.4, module version = 0.1.0 [ 8.530] ABI class: X.Org Video Driver, version 8.0 [ 8.530] (II) Loading sub module "dri" [ 8.530] (II) LoadModule: "dri" [ 8.531] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so [ 8.532] (II) VBoxVideo(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 8.532] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32 [ 8.532] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 132.1 MHz (scaled from 0.0 MHz), 68.6 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 132.1 MHz (scaled from 0.0 MHz), 68.6 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 132.1 MHz (scaled from 0.0 MHz), 68.6 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz) [ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 8.532] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz) [ 8.532] (==) VBoxVideo(0): RGB weight 888 [ 8.532] (==) VBoxVideo(0): Default visual is TrueColor [ 8.532] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0) [ 8.532] (==) VBoxVideo(0): DPI set to (96, 96) [ 8.532] (II) UnloadModule: "vesa" [ 8.532] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 8.532] (--) Depth 24 pixmap format is 32 bpp [ 8.533] (II) Loading sub module "int10" [ 8.533] (II) LoadModule: "int10" [ 8.533] (II) Loading /usr/lib/xorg/modules/libint10.so [ 8.534] (II) Module int10: vendor="X.Org Foundation" [ 8.534] compiled for 1.9.4, module version = 1.0.0 [ 8.534] ABI class: X.Org Video Driver, version 8.0 [ 8.534] (II) VBoxVideo(0): initializing int10 [ 8.535] (II) VBoxVideo(0): Primary V_BIOS segment is: 0xc000 [ 8.538] (II) VBoxVideo(0): VESA BIOS detected [ 8.538] (II) VBoxVideo(0): VESA VBE Version 2.0 [ 8.538] (II) VBoxVideo(0): VESA VBE Total Mem: 22528 kB [ 8.538] (II) VBoxVideo(0): VESA VBE OEM: VirtualBox VBE BIOS http://www.virtualbox.org/ [ 8.538] (II) VBoxVideo(0): VESA VBE OEM Software Rev: 0.2 [ 8.538] (II) VBoxVideo(0): VESA VBE OEM Vendor: Oracle Corporation [ 8.538] (II) VBoxVideo(0): VESA VBE OEM Product: Oracle VM VirtualBox VBE Adapter [ 8.538] (II) VBoxVideo(0): VESA VBE OEM Product Rev: Oracle VM VirtualBox Version 4.0.4 [ 9.372] (==) VBoxVideo(0): Default visual is TrueColor [ 9.372] drmOpenDevice: node name is /dev/dri/card0 [ 9.417] drmOpenDevice: node name is /dev/dri/card0 [ 9.518] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 9.518] drmOpenDevice: node name is /dev/dri/card0 [ 9.518] drmOpenDevice: open result is 11, (OK) [ 9.518] drmOpenByBusid: drmOpenMinor returns 11 [ 9.518] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 9.518] (II) [drm] loaded kernel module for "vboxvideo" driver. [ 9.518] (II) [drm] DRM interface version 1.3 [ 9.518] (II) [drm] DRM open master succeeded. [ 9.518] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables. [ 9.518] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000 [ 9.518] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel [ 9.518] (II) VBoxVideo(0): X context handle = 0x1 [ 9.518] (II) VBoxVideo(0): [drm] installed DRM signal handler [ 9.518] (II) VBoxVideo(0): visual configurations initialized [ 9.562] (==) VBoxVideo(0): Backing store disabled [ 9.562] (II) VBoxVideo(0): Requested monitor count: 1 [ 9.562] (II) VBoxVideo(0): Output VBOX0 has no monitor section [ 9.562] (II) VBoxVideo(0): Output VBOX0 has no monitor section [ 9.563] (II) VBoxVideo(0): EDID for output VBOX0 [ 9.563] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 74516352 [ 9.563] (II) VBoxVideo(0): Year: 1990 Week: 1 [ 9.563] (II) VBoxVideo(0): EDID Version: 1.3 [ 9.563] (II) VBoxVideo(0): Digital Display Input [ 9.563] (II) VBoxVideo(0): Indeterminate output size [ 9.563] (II) VBoxVideo(0): Gamma: 2.20 [ 9.563] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off [ 9.563] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 9.563] (II) VBoxVideo(0): Default color space is primary color space [ 9.563] (II) VBoxVideo(0): First detailed timing is preferred mode [ 9.563] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 9.563] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [ 9.563] (II) VBoxVideo(0): Manufacturer's mask: 0 [ 9.563] (II) VBoxVideo(0): Supported detailed timing: [ 9.563] (II) VBoxVideo(0): clock: 132.1 MHz Image Size: 0 x 0 mm [ 9.563] (II) VBoxVideo(0): h_active: 1920 h_sync: 1922 h_sync_end 1924 h_blank_end 1926 h_border: 0 [ 9.563] (II) VBoxVideo(0): v_active: 1137 v_sync: 1139 v_sync_end 1141 v_blanking: 1143 v_border: 0 [ 9.563] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz [ 9.563] (II) VBoxVideo(0): Monitor name: VBOX monitor [ 9.563] (II) VBoxVideo(0): EDID (in hex): [ 9.563] (II) VBoxVideo(0): 00ffffffffffff005858000080077104 [ 9.563] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926 [ 9.563] (II) VBoxVideo(0): 0f505400000001010101010101010101 [ 9.563] (II) VBoxVideo(0): 01010101010198338006707106400202 [ 9.563] (II) VBoxVideo(0): 2200000000000000000000fd0000c800 [ 9.563] (II) VBoxVideo(0): c864000a202020202020000000fc0056 [ 9.564] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010 [ 9.564] (II) VBoxVideo(0): 000a20202020202020202020202000cb [ 9.564] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 9.564] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 9.564] (II) VBoxVideo(0): Using hsync ranges from config file [ 9.564] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 9.564] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 9.564] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 9.564] (II) VBoxVideo(0): Printing probed modes for output VBOX0 [ 9.564] (II) VBoxVideo(0): Modeline "1920x1137"x60.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz) [ 9.564] (II) VBoxVideo(0): Modeline "1440x1050"x60.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz) [ 9.564] (II) VBoxVideo(0): Modeline "1280x960"x60.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz) [ 9.564] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz) [ 9.564] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz) [ 9.564] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz) [ 9.564] (II) VBoxVideo(0): Output VBOX0 connected [ 9.564] (II) VBoxVideo(0): Using exact sizes for initial modes [ 9.564] (II) VBoxVideo(0): Output VBOX0 using initial mode 1920x1137 [ 9.564] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 9.564] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 9.606] (==) VBoxVideo(0): DPMS enabled [ 9.609] (II) VBoxVideo(0): [DRI] installation complete [ 9.609] (--) RandR disabled [ 9.609] (II) Initializing built-in extension Generic Event Extension [ 9.609] (II) Initializing built-in extension SHAPE [ 9.609] (II) Initializing built-in extension MIT-SHM [ 9.609] (II) Initializing built-in extension XInputExtension [ 9.609] (II) Initializing built-in extension XTEST [ 9.609] (II) Initializing built-in extension BIG-REQUESTS [ 9.609] (II) Initializing built-in extension SYNC [ 9.609] (II) Initializing built-in extension XKEYBOARD [ 9.609] (II) Initializing built-in extension XC-MISC [ 9.609] (II) Initializing built-in extension XINERAMA [ 9.609] (II) Initializing built-in extension XFIXES [ 9.609] (II) Initializing built-in extension RENDER [ 9.609] (II) Initializing built-in extension RANDR [ 9.609] (II) Initializing built-in extension COMPOSITE [ 9.609] (II) Initializing built-in extension DAMAGE [ 9.609] (II) SELinux: Disabled on system [ 9.629] (II) AIGLX: Screen 0 is not DRI2 capable [ 9.629] drmOpenDevice: node name is /dev/dri/card0 [ 9.629] drmOpenDevice: open result is 12, (OK) [ 9.629] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 9.629] drmOpenDevice: node name is /dev/dri/card0 [ 9.629] drmOpenDevice: open result is 12, (OK) [ 9.629] drmOpenByBusid: drmOpenMinor returns 12 [ 9.629] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 9.671] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver [ 9.671] (II) The file referenced, is *NOT* loaded [ 9.671] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so [ 9.671] (EE) AIGLX error: vboxvideo does not export required DRI extension [ 9.671] (EE) AIGLX: reverting to software rendering [ 9.726] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so [ 9.726] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 9.727] (II) VBoxVideo(0): Setting screen physical size to 508 x 300 [ 10.488] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 10.488] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 10.488] (II) LoadModule: "evdev" [ 10.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 10.502] (II) Module evdev: vendor="X.Org Foundation" [ 10.502] compiled for 1.9.4, module version = 2.6.0 [ 10.502] Module class: X.Org XInput Driver [ 10.502] ABI class: X.Org XInput driver, version 11.0 [ 10.502] (**) Power Button: always reports core events [ 10.502] (**) Power Button: Device: "/dev/input/event4" [ 10.521] (--) Power Button: Found keys [ 10.521] (II) Power Button: Configuring as keyboard [ 10.521] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 10.521] (**) Option "xkb_rules" "evdev" [ 10.521] (**) Option "xkb_model" "pc105" [ 10.521] (**) Option "xkb_layout" "gb" [ 10.521] (**) Option "xkb_options" "lv3:ralt_switch" [ 10.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event5) [ 10.684] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 10.684] (**) Sleep Button: always reports core events [ 10.684] (**) Sleep Button: Device: "/dev/input/event5" [ 10.704] (--) Sleep Button: Found keys [ 10.704] (II) Sleep Button: Configuring as keyboard [ 10.704] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 10.704] (**) Option "xkb_rules" "evdev" [ 10.704] (**) Option "xkb_model" "pc105" [ 10.704] (**) Option "xkb_layout" "gb" [ 10.716] (**) Option "xkb_options" "lv3:ralt_switch" [ 10.718] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event2) [ 10.718] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall" [ 10.718] (**) VirtualBox USB Tablet: always reports core events [ 10.718] (**) VirtualBox USB Tablet: Device: "/dev/input/event2" [ 10.744] (--) VirtualBox USB Tablet: Found 9 mouse buttons [ 10.744] (--) VirtualBox USB Tablet: Found scroll wheel(s) [ 10.744] (--) VirtualBox USB Tablet: Found relative axes [ 10.744] (--) VirtualBox USB Tablet: Found absolute axes [ 10.744] (--) VirtualBox USB Tablet: Found x and y absolute axes [ 10.744] (II) VirtualBox USB Tablet: Configuring as mouse [ 10.744] (II) VirtualBox USB Tablet: Adding scrollwheel support [ 10.744] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5 [ 10.744] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 10.744] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE) [ 10.744] (EE) VirtualBox USB Tablet: failed to initialize for relative axes. [ 10.744] (II) VirtualBox USB Tablet: initialized for absolute axes. [ 10.745] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0) [ 10.745] (II) No input driver/identifier specified (ignoring) [ 10.745] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1) [ 10.745] (II) No input driver/identifier specified (ignoring) [ 10.747] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1) [ 10.747] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 10.747] (**) AT Translated Set 2 keyboard: always reports core events [ 10.747] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" [ 10.756] (--) AT Translated Set 2 keyboard: Found keys [ 10.756] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 10.756] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 10.756] (**) Option "xkb_rules" "evdev" [ 10.756] (**) Option "xkb_model" "pc105" [ 10.756] (**) Option "xkb_layout" "gb" [ 10.756] (**) Option "xkb_options" "lv3:ralt_switch" [ 10.757] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event6) [ 10.757] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 10.757] (**) ImExPS/2 Generic Explorer Mouse: always reports core events [ 10.757] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event6" [ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons [ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) [ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes [ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes [ 10.772] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse [ 10.772] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support [ 10.772] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 10.772] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 10.772] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE) [ 10.772] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 [ 10.772] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0 [ 10.772] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000 [ 10.773] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4 [ 10.773] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes. [ 10.773] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2) [ 10.773] (II) No input driver/identifier specified (ignoring) [ 10.773] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 10.773] (II) No input driver/identifier specified (ignoring) [ 10.776] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0) [ 10.776] (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" [ 10.776] (**) Macintosh mouse button emulation: always reports core events [ 10.776] (**) Macintosh mouse button emulation: Device: "/dev/input/event0" [ 10.788] (--) Macintosh mouse button emulation: Found 3 mouse buttons [ 10.788] (--) Macintosh mouse button emulation: Found relative axes [ 10.788] (--) Macintosh mouse button emulation: Found x and y relative axes [ 10.788] (II) Macintosh mouse button emulation: Configuring as mouse [ 10.788] (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 [ 10.788] (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 10.788] (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) [ 10.788] (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 [ 10.788] (**) Macintosh mouse button emulation: (accel) acceleration profile 0 [ 10.789] (**) Macintosh mouse button emulation: (accel) acceleration factor: 2.000 [ 10.789] (**) Macintosh mouse button emulation: (accel) acceleration threshold: 4 [ 10.789] (II) Macintosh mouse button emulation: initialized for relative axes. [ 10.789] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) [ 10.789] (II) No input driver/identifier specified (ignoring) [ 10.790] (II) config/udev: Adding input device (unnamed) (/dev/vboxguest) [ 10.790] (**) (unnamed): Applying InputClass "vboxmouse" [ 10.790] (II) LoadModule: "vboxmouse" [ 10.790] (II) Loading /usr/lib/xorg/modules/input/vboxmouse_drv.so [ 10.811] (II) Module vboxmouse: vendor="Oracle Corporation" [ 10.811] compiled for 0.0.0, module version = 1.0.0 [ 10.811] Module class: X.Org XInput Driver [ 10.811] ABI class: X.Org XInput driver, version 11.0 [ 10.811] (**) Load address of symbol "VBOXMOUSE" is 0x7f6bfb50f8a0 [ 10.811] (**) (unnamed): always reports core events [ 10.811] (**) (unnamed): Device: "/dev/vboxguest" [ 10.811] (II) XINPUT: Adding extended input device "(unnamed)" (type: MOUSE) [ 10.811] (**) (unnamed): (accel) keeping acceleration scheme 1 [ 10.811] (**) (unnamed): (accel) acceleration profile 0 [ 10.812] (**) (unnamed): (accel) acceleration factor: 2.000 [ 10.812] (**) (unnamed): (accel) acceleration threshold: 4 [ 10.812] (II) (unnamed): On. [ 13.218] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 13.218] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 13.218] (II) VBoxVideo(0): Using hsync ranges from config file [ 13.218] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 13.218] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 13.218] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 13.230] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 13.230] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 13.230] (II) VBoxVideo(0): Using hsync ranges from config file [ 13.230] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 13.230] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 13.230] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 13.307] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 13.307] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 13.307] (II) VBoxVideo(0): Using hsync ranges from config file [ 13.307] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 13.307] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 13.307] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 168.064] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 168.064] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 168.064] (II) VBoxVideo(0): Using hsync ranges from config file [ 168.064] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 168.064] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 168.064] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 168.071] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 168.071] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 168.071] (II) VBoxVideo(0): Using hsync ranges from config file [ 168.071] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 168.071] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 168.071] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 168.075] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 168.075] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 168.075] (II) VBoxVideo(0): Using hsync ranges from config file [ 168.075] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 168.076] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 168.076] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 170.459] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 170.459] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 170.459] (II) VBoxVideo(0): Using hsync ranges from config file [ 170.459] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 170.459] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 170.459] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 170.982] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 170.982] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 170.982] (II) VBoxVideo(0): Using hsync ranges from config file [ 170.982] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 170.982] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 170.982] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 37976.962] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 37976.962] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 37976.962] (II) VBoxVideo(0): Using hsync ranges from config file [ 37976.962] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 37976.962] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 37976.962] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 52601.754] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 52601.754] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 52601.754] (II) VBoxVideo(0): Using hsync ranges from config file [ 52601.754] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 52601.754] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 52601.754] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67303.235] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67303.252] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67303.252] (II) VBoxVideo(0): Using hsync ranges from config file [ 67303.252] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67303.252] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67303.252] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67303.375] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67303.375] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67303.375] (II) VBoxVideo(0): Using hsync ranges from config file [ 67303.375] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67303.375] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67303.375] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67303.790] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67303.790] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67303.790] (II) VBoxVideo(0): Using hsync ranges from config file [ 67303.790] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67303.790] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67303.790] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.022] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.022] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.022] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.022] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.022] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.022] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.022] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.022] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.022] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.022] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.023] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.023] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.023] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.023] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.023] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.023] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.023] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.023] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.024] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.024] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.024] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.024] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.024] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.024] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.124] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.124] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.124] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.124] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.124] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.124] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.124] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.124] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.124] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.124] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.124] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.124] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.128] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.128] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.128] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.128] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.128] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.128] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.131] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.131] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.131] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.131] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.131] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.131] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.174] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.174] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 67305.174] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.174] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.174] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.174] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz) [ 67305.195] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.195] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.195] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.195] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.195] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.195] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.274] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.274] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.275] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.275] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.275] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.275] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.526] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.526] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.526] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.526] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.526] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.526] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.530] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.530] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.530] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.530] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.530] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.530] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.547] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.547] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.547] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.547] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.547] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.547] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.550] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.550] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.550] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.550] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.550] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.550] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.558] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.558] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.558] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.558] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.558] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.558] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.563] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.563] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.563] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.563] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.563] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.563] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.573] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.573] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.573] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.573] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.573] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.573] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 67305.578] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 67305.578] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync. [ 67305.578] (II) VBoxVideo(0): Using hsync ranges from config file [ 67305.578] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 67305.578] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 67305.578] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz) [ 87015.115] (II) config/udev: removing device VirtualBox USB Tablet [ 87015.486] (II) VirtualBox USB Tablet: Close [ 87015.486] (II) UnloadModule: "evdev" [ 87015.787] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event2) [ 87015.795] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall" [ 87015.800] (**) VirtualBox USB Tablet: always reports core events [ 87015.800] (**) VirtualBox USB Tablet: Device: "/dev/input/event2" [ 87015.816] (--) VirtualBox USB Tablet: Found 9 mouse buttons [ 87015.816] (--) VirtualBox USB Tablet: Found scroll wheel(s) [ 87015.816] (--) VirtualBox USB Tablet: Found relative axes [ 87015.816] (--) VirtualBox USB Tablet: Found absolute axes [ 87015.816] (--) VirtualBox USB Tablet: Found x and y absolute axes [ 87015.816] (II) VirtualBox USB Tablet: Configuring as mouse [ 87015.816] (II) VirtualBox USB Tablet: Adding scrollwheel support [ 87015.816] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5 [ 87015.816] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 87015.816] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE) [ 87015.816] (EE) VirtualBox USB Tablet: failed to initialize for relative axes. [ 87015.816] (II) VirtualBox USB Tablet: initialized for absolute axes. [ 87015.817] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1) [ 87015.817] (II) No input driver/identifier specified (ignoring) [ 87015.817] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0) [ 87015.817] (II) No input driver/identifier specified (ignoring) [ 87046.768] [mi] EQ overflowing. The server is probably stuck in an infinite loop. [ 87046.768] Backtrace: [ 87046.834] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x45ceb8] [ 87046.834] 1: /usr/bin/Xorg (mieqEnqueue+0x1f4) [0x45cd34] [ 87046.844] 2: /usr/bin/Xorg (xf86PostMotionEventP+0xc4) [0x46ddb4] [ 87046.844] 3: /usr/bin/Xorg (xf86PostMotionEvent+0xa9) [0x46df59] [ 87046.844] 4: /usr/lib/xorg/modules/input/vboxmouse_drv.so (0x7f6bfb2bf000+0x176bf) [0x7f6bfb2d66bf] [ 87046.844] 5: /usr/bin/Xorg (0x400000+0x74277) [0x474277] [ 87046.844] 6: /usr/bin/Xorg (0x400000+0x1046f3) [0x5046f3] [ 87046.844] 7: /lib/libpthread.so.0 (0x7f6c012b3000+0xef60) [0x7f6c012c1f60] [ 87046.844] 8: /lib/libc.so.6 (memcpy+0x35) [0x7f6c00077785] [ 87046.844] 9: /usr/lib/xorg/modules/libfb.so (fbBlt+0xfc) [0x7f6bfd9d9c3c] [ 87046.844] 10: /usr/lib/xorg/modules/libfb.so (fbOddTile+0x16e) [0x7f6bfd9e72ee] [ 87046.844] 11: /usr/lib/xorg/modules/libfb.so (fbFill+0x45b) [0x7f6bfd9ddabb] [ 87046.844] 12: /usr/lib/xorg/modules/libfb.so (fbPolyFillRect+0x175) [0x7f6bfd9dde75] [ 87046.844] 13: /usr/lib/xorg/modules/libshadowfb.so (0x7f6bfd7c1000+0x24f9) [0x7f6bfd7c34f9] [ 87046.844] 14: /usr/bin/Xorg (0x400000+0xcc08d) [0x4cc08d] [ 87046.844] 15: /usr/bin/Xorg (miPaintWindow+0x1aa) [0x45a11a] [ 87046.844] 16: /usr/bin/Xorg (miWindowExposures+0xc8) [0x45a658] [ 87046.844] 17: /usr/lib/xorg/modules/extensions/libdri.so (DRIWindowExposures+0x9c) [0x7f6bfe66fc5c] [ 87046.844] 18: /usr/bin/Xorg (miHandleValidateExposures+0x68) [0x55e7a8] [ 87046.844] 19: /usr/bin/Xorg (miMoveWindow+0x21d) [0x55d9bd] [ 87046.845] 20: /usr/bin/Xorg (0x400000+0x124bde) [0x524bde] [ 87046.845] 21: /usr/bin/Xorg (ConfigureWindow+0x526) [0x455e16] [ 87046.845] 22: /usr/bin/Xorg (0x400000+0x31f94) [0x431f94] [ 87046.845] 23: /usr/bin/Xorg (0x400000+0x32e19) [0x432e19] [ 87046.845] 24: /usr/bin/Xorg (0x400000+0x2573b) [0x42573b] [ 87046.845] 25: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f6c00016c4d] [ 87046.845] 26: /usr/bin/Xorg (0x400000+0x252c9) [0x4252c9] udev information: - ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 N: input/event4 S: char/13:68 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 E: MAJOR=13 E: MINOR=68 E: DEVNAME=/dev/input/event4 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: DEVLINKS=/dev/char/13:68 E: XKBOPTIONS=lv3:ralt_switch E: DMI_VENDOR=innotek GmbH P: /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event5 N: input/event5 S: char/13:69 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event5 E: MAJOR=13 E: MINOR=69 E: DEVNAME=/dev/input/event5 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: DEVLINKS=/dev/char/13:69 E: XKBOPTIONS=lv3:ralt_switch E: DMI_VENDOR=innotek GmbH P: /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/event2 N: input/event2 S: char/13:66 S: input/by-id/usb-VirtualBox_USB_Tablet-event-mouse S: input/by-path/pci-0000:00:06.0-usb-0:1:1.0-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/event2 E: MAJOR=13 E: MINOR=66 E: DEVNAME=/dev/input/event2 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=VirtualBox E: ID_VENDOR_ENC=VirtualBox E: ID_VENDOR_ID=80ee E: ID_MODEL=USB_Tablet E: ID_MODEL_ENC=USB\x20Tablet E: ID_MODEL_ID=0021 E: ID_REVISION=0100 E: ID_SERIAL=VirtualBox_USB_Tablet E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:06.0-usb-0:1:1.0 E: DEVLINKS=/dev/char/13:66 /dev/input/by-id/usb-VirtualBox_USB_Tablet-event-mouse /dev/input/by-path/pci-0000:00:06.0-usb-0:1:1.0-event-mouse P: /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/js0 N: input/js0 S: char/13:0 S: input/by-id/usb-VirtualBox_USB_Tablet-mouse S: input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/js0 E: MAJOR=13 E: MINOR=0 E: DEVNAME=/dev/input/js0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=VirtualBox E: ID_VENDOR_ENC=VirtualBox E: ID_VENDOR_ID=80ee E: ID_MODEL=USB_Tablet E: ID_MODEL_ENC=USB\x20Tablet E: ID_MODEL_ID=0021 E: ID_REVISION=0100 E: ID_SERIAL=VirtualBox_USB_Tablet E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:06.0-usb-0:1:1.0 E: DEVLINKS=/dev/char/13:0 /dev/input/by-id/usb-VirtualBox_USB_Tablet-mouse /dev/input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse P: /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/mouse1 N: input/mouse1 S: char/13:33 S: input/by-id/usb-VirtualBox_USB_Tablet-mouse S: input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/mouse1 E: MAJOR=13 E: MINOR=33 E: DEVNAME=/dev/input/mouse1 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=VirtualBox E: ID_VENDOR_ENC=VirtualBox E: ID_VENDOR_ID=80ee E: ID_MODEL=USB_Tablet E: ID_MODEL_ENC=USB\x20Tablet E: ID_MODEL_ID=0021 E: ID_REVISION=0100 E: ID_SERIAL=VirtualBox_USB_Tablet E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:06.0-usb-0:1:1.0 E: DEVLINKS=/dev/char/13:33 /dev/input/by-id/usb-VirtualBox_USB_Tablet-mouse /dev/input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse P: /devices/platform/i8042/serio0/input/input1/event1 N: input/event1 S: char/13:65 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: XKBMODEL=pc105 E: XKBLAYOUT=gb E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd E: XKBOPTIONS=lv3:ralt_switch E: DMI_VENDOR=innotek GmbH P: /devices/platform/i8042/serio1/input/input6/event6 N: input/event6 S: char/13:70 S: input/by-path/platform-i8042-serio-1-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6 E: MAJOR=13 E: MINOR=70 E: DEVNAME=/dev/input/event6 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: DMI_VENDOR=innotek GmbH E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-i8042-serio-1-event-mouse P: /devices/platform/i8042/serio1/input/input6/mouse2 N: input/mouse2 S: char/13:34 S: input/by-path/platform-i8042-serio-1-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse2 E: MAJOR=13 E: MINOR=34 E: DEVNAME=/dev/input/mouse2 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: DEVLINKS=/dev/char/13:34 /dev/input/by-path/platform-i8042-serio-1-mouse P: /devices/platform/pcspkr/input/input3/event3 N: input/event3 S: char/13:67 S: input/by-path/platform-pcspkr-event-spkr E: UDEV_LOG=3 E: DEVPATH=/devices/platform/pcspkr/input/input3/event3 E: MAJOR=13 E: MINOR=67 E: DEVNAME=/dev/input/event3 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_SERIAL=noserial E: ID_PATH=platform-pcspkr E: DMI_VENDOR=innotek GmbH E: DEVLINKS=/dev/char/13:67 /dev/input/by-path/platform-pcspkr-event-spkr P: /devices/virtual/input/input0/event0 N: input/event0 S: char/13:64 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: DMI_VENDOR=innotek GmbH E: DEVLINKS=/dev/char/13:64 P: /devices/virtual/input/input0/mouse0 N: input/mouse0 S: char/13:32 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input0/mouse0 E: MAJOR=13 E: MINOR=32 E: DEVNAME=/dev/input/mouse0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: DEVLINKS=/dev/char/13:32 P: /devices/virtual/misc/vboxguest N: vboxguest S: char/10:59 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/misc/vboxguest E: MAJOR=10 E: MINOR=59 E: DEVNAME=/dev/vboxguest E: SUBSYSTEM=misc E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: DEVLINKS=/dev/char/10:59 DRM Information from dmesg: - --------------------------- [ 0.000000] No AGP bridge found [ 0.620747] Linux agpgart interface v0.103 [ 9.477723] [drm] Initialized drm 1.1.0 20060810 [ 9.518398] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0 - -- System Information: Debian Release: 6.0 APT prefers squeeze-updates APT policy: (550, 'squeeze-updates'), (550, 'stable'), (540, 'testing'), (530, 'unstable'), (520, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-core depends on: ii keyboard-configuration 1.68 system-wide keyboard preferences ii libaudit0 1.7.13-1+b2 Dynamic library for security audit ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib ii libdrm2 2.4.21-1~squeeze3 Userspace interface to kernel DRM ii libgcrypt11 1.4.6-5 LGPL Crypto library - runtime libr ii libpciaccess0 0.12.0-1 Generic PCI access library for X ii libpixman-1-0 0.21.4-2 pixel-manipulation library for X a ii libselinux1 2.0.96-1 SELinux runtime shared libraries ii libudev0 164-3 libudev shared library ii libxau6 1:1.0.6-1 X11 authorisation library ii libxdmcp6 1:1.0.3-2 X11 Display Manager Control Protoc ii libxfont1 1:1.4.3-2 X11 font rasterisation library ii udev 164-3 /dev/ and hotplug management daemo ii xserver-common 2:1.9.4.901-1 common files used by various X ser Versions of packages xserver-xorg-core recommends: ii libgl1-mesa-dri 7.7.1-4 A free implementation of the OpenG Versions of packages xserver-xorg-core suggests: ii xfonts-100dpi 1:1.0.1 100 dpi fonts for X ii xfonts-75dpi 1:1.0.1 75 dpi fonts for X ii xfonts-scalable 1:1.0.1-1 scalable fonts for X - -- no debconf information -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAk13970ACgkQshl/216gEHjwZACgmwAEoISr5Pi8rWxrQ2PxgpDb 8dEAoKwXh82rw9mYmAgVSyG2NxZNaHcP =+7xS -----END PGP SIGNATURE-----
--- End Message ---
--- Begin Message ---
- To: 617608-done@bugs.debian.org
- Subject: Not seen for a long time
- From: Sam Morris <sam@robots.org.uk>
- Date: Thu, 15 Oct 2015 14:58:05 +0100
- Message-id: <1444917485.3900.2.camel@robots.org.uk>
-- Sam Morris <https://robots.org.uk/> CAAA AA1A CA69 A83A 892B 1855 D20B 4202 5CDA 27B9Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---