Bug#801105: /usr/lib/i386-linux-gnu/dri/i915_dri.so: Most of accelerated applications crash
В Tue, 6 Oct 2015 18:02:42 +0200
Julien Cristau <jcristau@debian.org> пишет:
> Please provide X and kernel logs.
Sure, here they are. Though there is nothing of interest just after the
crash and initialization messages look very ordinary. Should I
have increased a verbosity level somewhere?
--
Best regards,
Ivan
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f67ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f680000-0x000000003f68dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f68e000-0x000000003f6cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f6d0000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: ASUSTeK Computer INC. 1011PX/1015PE, BIOS 1401 08/30/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f680 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[ 0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[ 0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3607a000-0x37034fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FBE90 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x3F680100 00006C (v01 _ASUS_ Notebook 08001130 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x3F680290 0000F4 (v04 A_M_I_ OEMFACP 08001130 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x3F6804A0 0085B1 (v02 A1563 A1563000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x3F68E000 000040
[ 0.000000] ACPI: APIC 0x3F680390 00006C (v02 A_M_I_ OEMAPIC 08001130 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x3F680400 00003C (v01 A_M_I_ OEMMCFG 08001130 MSFT 00000097)
[ 0.000000] ACPI: ECDT 0x3F680440 000055 (v01 A_M_I_ OEMECDT 08001130 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x3F68E040 000061 (v01 A_M_I_ AMI_OEM 08001130 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x3F688A60 000038 (v01 A_M_I_ OEMHPET 08001130 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x3F68E0B0 002024 (v01 A_M_I_ GMCHSCI 08001130 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x3F691360 000999 (v01 PmRef CpuPm4 00003000 INTL 20051117)
[ 0.000000] ACPI: SLIC 0x3F688AA0 000176 (v01 _ASUS_ Notebook 08001130 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 128MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3f67ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3f67ffff]
[ 0.000000] On node 0 totalpages: 259614
[ 0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f588a020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 258 pages used for memmap
[ 0.000000] HighMem zone: 32898 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75c0000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257842
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=/dev/mapper/VG-root ro apparmor=1 security=apparmor pcie_aspm=force quiet
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0003f680)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1005316K/1038456K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 33140K reserved, 131592K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166d000 - 0xc1711000 ( 656 kB)
.data : 0xc147e300 - 0xc166b880 (1973 kB)
.text : 0xc1000000 - 0xc147e300 (4600 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1666.419 MHz processor
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.83 BogoMIPS (lpj=6665676)
[ 0.004025] pid_max: default: 32768 minimum: 301
[ 0.004049] ACPI: Core revision 20140424
[ 0.022213] ACPI: All ACPI Tables successfully acquired
[ 0.024077] Security Framework initialized
[ 0.024100] AppArmor: AppArmor initialized
[ 0.024105] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.024145] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.024152] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.028088] Initializing cgroup subsys memory
[ 0.028104] Initializing cgroup subsys devices
[ 0.028125] Initializing cgroup subsys freezer
[ 0.028135] Initializing cgroup subsys net_cls
[ 0.028150] Initializing cgroup subsys blkio
[ 0.028162] Initializing cgroup subsys perf_event
[ 0.028170] Initializing cgroup subsys net_prio
[ 0.028223] CPU: Physical Processor ID: 0
[ 0.028228] CPU: Processor Core ID: 0
[ 0.028237] mce: CPU supports 5 MCE banks
[ 0.028249] CPU0: Thermal monitoring enabled (TM2)
[ 0.028256] process: using mwait in idle threads
[ 0.028269] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.028464] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[ 0.030070] ftrace: allocating 20756 entries in 41 pages
[ 0.040164] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040655] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082112] smpboot: CPU0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz (fam: 06, model: 1c, stepping: 0a)
[ 0.084000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.084000] ... version: 3
[ 0.084000] ... bit width: 40
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 000000ffffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 3
[ 0.084000] ... event mask: 0000000700000003
[ 0.084293] CPU 1 irqstacks, hard=f5546000 soft=f5548000
[ 0.084300] x86: Booting SMP configuration:
[ 0.084305] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.096203] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096583] CPU 2 irqstacks, hard=f55da000 soft=f55dc000
[ 0.096589] #2
[ 0.008000] Initializing CPU#2
[ 0.111366] CPU 3 irqstacks, hard=f562c000 soft=f562e000
[ 0.111374] #3
[ 0.008000] Initializing CPU#3
[ 0.124000] TSC synchronization [CPU#0 -> CPU#3]:
[ 0.124000] Measured 80 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.124000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.124097] x86: Booted up 1 node, 4 CPUs
[ 0.124104] smpboot: Total of 4 processors activated (13331.35 BogoMIPS)
[ 0.126018] devtmpfs: initialized
[ 0.126018] PM: Registering ACPI NVS region [mem 0x3f68e000-0x3f6cffff] (270336 bytes)
[ 0.127205] pinctrl core: initialized pinctrl subsystem
[ 0.127433] NET: Registered protocol family 16
[ 0.128218] cpuidle: using governor ladder
[ 0.128226] cpuidle: using governor menu
[ 0.128381] ACPI: bus type PCI registered
[ 0.128388] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.128630] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.128638] PCI: not using MMCONFIG
[ 0.128836] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.128928] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.128932] PCI: Using configuration type 1 for base access
[ 0.144169] ACPI: Added _OSI(Module Device)
[ 0.144176] ACPI: Added _OSI(Processor Device)
[ 0.144181] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144185] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147174] ACPI : EC: EC description table is found, configuring boot EC
[ 0.150494] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.156852] ACPI: Dynamic OEM Table Load:
[ 0.156870] ACPI: SSDT 0xF56BBC00 00033A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.158043] ACPI: Dynamic OEM Table Load:
[ 0.158061] ACPI: SSDT 0xF5679000 000724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.158061] ACPI: Dynamic OEM Table Load:
[ 0.158061] ACPI: SSDT 0xF566C000 000217 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.158061] ACPI: Dynamic OEM Table Load:
[ 0.158061] ACPI: SSDT 0xF5682DC0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.159122] ACPI: Dynamic OEM Table Load:
[ 0.159137] ACPI: SSDT 0xF568EC00 000217 (v01 PmRef Cpu2Ist 00003000 INTL 20051117)
[ 0.160159] ACPI: Dynamic OEM Table Load:
[ 0.160171] ACPI: SSDT 0xF5682D00 000085 (v01 PmRef Cpu2Cst 00003000 INTL 20051117)
[ 0.161457] ACPI: Dynamic OEM Table Load:
[ 0.161471] ACPI: SSDT 0xF568E800 000217 (v01 PmRef Cpu3Ist 00003000 INTL 20051117)
[ 0.162481] ACPI: Dynamic OEM Table Load:
[ 0.162493] ACPI: SSDT 0xF5682C40 000085 (v01 PmRef Cpu3Cst 00003000 INTL 20051117)
[ 0.163697] ACPI: Interpreter enabled
[ 0.163722] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.163733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.163767] ACPI: (supports S0 S3 S4 S5)
[ 0.163772] ACPI: Using IOAPIC for interrupt routing
[ 0.163835] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.165072] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.165077] PCI: Using MMCONFIG for extended config space
[ 0.165124] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.177336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.180754] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.180770] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.180785] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.181448] PCI host bridge to bus 0000:00
[ 0.181457] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.181464] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.181470] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.181476] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.181482] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.181488] pci_bus 0000:00: root bus resource [mem 0x3f700000-0xfed8ffff]
[ 0.181510] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[ 0.181746] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[ 0.181765] pci 0000:00:02.0: reg 0x10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.181775] pci 0000:00:02.0: reg 0x14: [io 0xdc00-0xdc07]
[ 0.181786] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.181797] pci 0000:00:02.0: reg 0x1c: [mem 0xf7d00000-0xf7dfffff]
[ 0.182027] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[ 0.182043] pci 0000:00:02.1: reg 0x10: [mem 0xf7e80000-0xf7efffff]
[ 0.182324] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.182359] pci 0000:00:1b.0: reg 0x10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[ 0.182492] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.182725] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.182857] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.182967] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.183123] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.183263] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.183368] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.183525] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.183667] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.183771] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.183924] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.183991] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.184236] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.184303] pci 0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f]
[ 0.184536] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.184603] pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f]
[ 0.184832] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.184899] pci 0000:00:1d.3: reg 0x20: [io 0xd880-0xd89f]
[ 0.185150] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.185183] pci 0000:00:1d.7: reg 0x10: [mem 0xf7cf7c00-0xf7cf7fff]
[ 0.185303] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.185540] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.185706] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.185858] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.186205] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.186240] pci 0000:00:1f.2: reg 0x10: [io 0xd080-0xd087]
[ 0.186257] pci 0000:00:1f.2: reg 0x14: [io 0xd000-0xd003]
[ 0.186274] pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07]
[ 0.186291] pci 0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883]
[ 0.186308] pci 0000:00:1f.2: reg 0x20: [io 0xc800-0xc81f]
[ 0.186325] pci 0000:00:1f.2: reg 0x24: [mem 0xf7cf7800-0xf7cf7bff]
[ 0.186403] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.186770] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.186954] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.186999] pci 0000:02:00.0: reg 0x10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.187189] pci 0000:02:00.0: supports D1
[ 0.187194] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.196039] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.196054] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.196067] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.196245] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
[ 0.196291] pci 0000:01:00.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.196313] pci 0000:01:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.196485] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204036] pci 0000:00:1c.3: PCI bridge to [bus 01]
[ 0.204046] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.204056] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.204228] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.204249] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.204255] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.204261] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.204267] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.204274] pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xfed8ffff] (subtractive decode)
[ 0.204316] pci_bus 0000:00: on NUMA node 0
[ 0.206036] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.206194] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.206349] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.206503] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.206656] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.206812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.206966] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.207119] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.207391] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.207547] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.208063] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.208069] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208079] vgaarb: loaded
[ 0.208083] vgaarb: bridge control possible 0000:00:02.0
[ 0.208083] PCI: Using ACPI for IRQ routing
[ 0.208148] PCI: pci_cache_line_size set to 64 bytes
[ 0.208226] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.208232] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.208237] e820: reserve RAM buffer [mem 0x3f680000-0x3fffffff]
[ 0.208710] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.208721] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.208731] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.212060] Switched to clocksource hpet
[ 0.227384] AppArmor: AppArmor Filesystem Enabled
[ 0.227586] pnp: PnP ACPI init
[ 0.227634] ACPI: bus type PNP registered
[ 0.227827] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.227836] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.227845] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.228081] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228254] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.228409] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.228857] system 00:04: [io 0x025c-0x025f] has been reserved
[ 0.228866] system 00:04: [io 0x0380-0x0383] has been reserved
[ 0.228873] system 00:04: [io 0x0400-0x041f] has been reserved
[ 0.228880] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.228887] system 00:04: [io 0x0800-0x087f] could not be reserved
[ 0.228894] system 00:04: [io 0x0480-0x04bf] has been reserved
[ 0.228902] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.228909] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.228917] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.228924] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.228931] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.228940] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229240] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.229248] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.229257] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229443] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.229452] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230034] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.230044] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.230051] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.230058] system 00:07: [mem 0x00100000-0x3f6fffff] could not be reserved
[ 0.230065] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.230074] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.230479] pnp: PnP ACPI: found 8 devices
[ 0.230484] ACPI: bus type PNP unregistered
[ 0.230500] PnPBIOS: Disabled by ACPI PNP
[ 0.272937] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.272949] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.272958] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.272976] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.272996] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.273027] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.273034] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.273041] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.273048] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.273055] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.273071] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.273088] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.273103] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.273113] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.273122] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.273130] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.273138] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.273150] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.273159] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.273172] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.273180] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.273190] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.273199] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.273211] pci 0000:00:1c.3: PCI bridge to [bus 01]
[ 0.273219] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.273229] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.273239] pci 0000:00:1c.3: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.273250] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.273270] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.273276] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.273283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.273289] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.273295] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xfed8ffff]
[ 0.273301] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.273307] pci_bus 0000:04: resource 1 [mem 0x40000000-0x401fffff]
[ 0.273313] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.273320] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.273326] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.273332] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.273338] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.273344] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.273350] pci_bus 0000:01: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.273357] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.273363] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.273369] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.273375] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.273381] pci_bus 0000:05: resource 8 [mem 0x3f700000-0xfed8ffff]
[ 0.273530] NET: Registered protocol family 2
[ 0.274145] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.274187] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.274243] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.274288] TCP: reno registered
[ 0.274296] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274313] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274492] NET: Registered protocol family 1
[ 0.274536] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.275669] PCI: CLS 32 bytes, default 64
[ 0.275811] Unpacking initramfs...
[ 1.038933] Freeing initrd memory: 16108K (f607a000 - f7035000)
[ 1.039803] microcode: CPU0 sig=0x106ca, pf=0x10, revision=0x107
[ 1.039832] microcode: CPU1 sig=0x106ca, pf=0x10, revision=0x107
[ 1.039847] microcode: CPU2 sig=0x106ca, pf=0x10, revision=0x107
[ 1.039871] microcode: CPU3 sig=0x106ca, pf=0x10, revision=0x107
[ 1.040086] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.041088] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.041171] audit: initializing netlink subsys (disabled)
[ 1.041223] audit: type=2000 audit(1443624456.040:1): initialized
[ 1.042030] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.042074] zbud: loaded
[ 1.042394] VFS: Disk quotas dquot_6.5.2
[ 1.042439] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.042575] msgmni has been set to 1737
[ 1.043542] alg: No test for stdrng (krng)
[ 1.043609] bounce: pool size: 64 pages
[ 1.043656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.043798] io scheduler noop registered
[ 1.043805] io scheduler deadline registered
[ 1.043924] io scheduler cfq registered (default)
[ 1.044180] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.044375] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.044550] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
[ 1.044686] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 1.044969] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 1.045222] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.045278] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.045344] intel_idle: MWAIT substates: 0x20220
[ 1.045365] intel_idle: v0.4 model 0x1C
[ 1.045370] intel_idle: lapic_timer_reliable_states 0x2
[ 1.045881] GHES: HEST is not enabled!
[ 1.045940] isapnp: Scanning for PnP cards...
[ 1.399691] isapnp: No Plug & Play device found
[ 1.399954] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.401450] Linux agpgart interface v0.103
[ 1.401707] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.401746] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.401935] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.402290] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.402783] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.420377] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.420395] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.420901] mousedev: PS/2 mouse device common for all mice
[ 1.421619] rtc_cmos 00:01: RTC can wake from S4
[ 1.421917] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.421965] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.422012] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.422936] TCP: cubic registered
[ 1.423184] NET: Registered protocol family 10
[ 1.423827] mip6: Mobile IPv6
[ 1.423837] NET: Registered protocol family 17
[ 1.423854] mpls_gso: MPLS GSO support
[ 1.424598] Using IPI No-Shortcut mode
[ 1.425066] registered taskstats version 1
[ 1.425145] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.426119] rtc_cmos 00:01: setting system clock to 2015-09-30 14:47:37 UTC (1443624457)
[ 1.426304] PM: Hibernation image not present or could not be loaded.
[ 1.426853] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[ 1.427021] Write protecting the kernel text: 4604k
[ 1.427134] Write protecting the kernel read-only data: 1452k
[ 1.427138] NX-protecting the kernel data: 3588k
[ 1.441663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.563653] systemd-udevd[76]: starting version 215
[ 1.564980] random: systemd-udevd urandom read with 1 bits of entropy available
[ 1.618604] ACPI: bus type USB registered
[ 1.618750] usbcore: registered new interface driver usbfs
[ 1.618830] usbcore: registered new interface driver hub
[ 1.619031] usbcore: registered new device driver usb
[ 1.620998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.621976] ehci-pci: EHCI PCI platform driver
[ 1.622399] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.622426] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.622431] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.622466] ehci-pci 0000:00:1d.7: debug port 1
[ 1.626443] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.626524] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.626642] SCSI subsystem initialized
[ 1.630035] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.630044] ACPI: Thermal Zone [TZ00] (29 C)
[ 1.631847] libata version 3.00 loaded.
[ 1.636082] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.636380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.636392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636400] usb usb1: Product: EHCI Host Controller
[ 1.636407] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.636414] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.637139] hub 1-0:1.0: USB hub found
[ 1.637185] hub 1-0:1.0: 8 ports detected
[ 1.639699] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.639743] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.639772] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.639818] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.640101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.640113] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.640121] usb usb2: Product: UHCI Host Controller
[ 1.640129] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.640136] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.640833] hub 2-0:1.0: USB hub found
[ 1.640874] hub 2-0:1.0: 2 ports detected
[ 1.641890] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.641923] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.641944] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.642036] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.642267] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.642278] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.642287] usb usb3: Product: UHCI Host Controller
[ 1.642295] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.642303] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.643160] hub 3-0:1.0: USB hub found
[ 1.643186] hub 3-0:1.0: 2 ports detected
[ 1.643850] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.643877] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.643897] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.643987] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.644235] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.644243] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.644251] usb usb4: Product: UHCI Host Controller
[ 1.644257] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.644264] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.644943] hub 4-0:1.0: USB hub found
[ 1.644970] hub 4-0:1.0: 2 ports detected
[ 1.645862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.645887] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.645908] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.645948] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[ 1.645997] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.646225] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.646235] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.646243] usb usb5: Product: UHCI Host Controller
[ 1.646250] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.646257] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.647021] hub 5-0:1.0: USB hub found
[ 1.647060] hub 5-0:1.0: 2 ports detected
[ 1.647819] ahci 0000:00:1f.2: version 3.0
[ 1.662078] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.662220] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.662234] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.668236] scsi0 : ahci
[ 1.670568] scsi1 : ahci
[ 1.671153] scsi2 : ahci
[ 1.673146] scsi3 : ahci
[ 1.673406] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 43
[ 1.673413] ata2: DUMMY
[ 1.673417] ata3: DUMMY
[ 1.673421] ata4: DUMMY
[ 1.992167] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.994810] ata1.00: unexpected _GTF length (8)
[ 2.032819] ata1.00: ATA-8: WDC WD3200BPVT-80JJ5T0, 01.01A01, max UDMA/133
[ 2.032832] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.035082] ata1.00: unexpected _GTF length (8)
[ 2.035466] ata1.00: configured for UDMA/133
[ 2.035785] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-8 1A01 PQ: 0 ANSI: 5
[ 2.044605] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.044616] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.044809] sd 0:0:0:0: [sda] Write Protect is off
[ 2.044818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.044880] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.095450] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.097287] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.098851] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.680465] device-mapper: uevent: version 1.0.3
[ 2.680764] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 11.976209] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 12.109797] usb 1-2: New USB device found, idVendor=054c, idProduct=06b0
[ 12.109805] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.109811] usb 1-2: Product: Storage Media
[ 12.109816] usb 1-2: Manufacturer: Sony
[ 12.109821] usb 1-2: SerialNumber: 4C5211410143750029
[ 12.115059] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 12.115446] scsi4 : usb-storage 1-2:1.0
[ 12.115902] usbcore: registered new interface driver usb-storage
[ 13.838373] scsi 4:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4
[ 13.839472] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 13.840081] sd 4:0:0:0: [sdb] 63406080 512-byte logical blocks: (32.4 GB/30.2 GiB)
[ 13.840975] sd 4:0:0:0: [sdb] Write Protect is off
[ 13.840989] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 13.841803] sd 4:0:0:0: [sdb] No Caching mode page found
[ 13.841814] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 13.847101] sdb: sdb1
[ 13.850556] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.921535] random: nonblocking pool is initialized
[ 20.705439] NET: Registered protocol family 38
[ 21.650622] PM: Starting manual resume from disk
[ 21.650635] PM: Hibernation image partition 254:2 present
[ 21.650639] PM: Looking for hibernation image.
[ 21.651287] PM: Image not found (code -22)
[ 21.651293] PM: Hibernation image not present or could not be loaded.
[ 21.889620] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 23.017076] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
[ 28.022985] lp: driver loaded but no devices found
[ 28.121819] ppdev: user-space parallel port driver
[ 28.251441] fuse init (API version 7.23)
[ 28.309765] loop: module loaded
[ 28.610455] systemd-udevd[286]: starting version 215
[ 30.620210] EXT4-fs (dm-1): warning: checktime reached, running e2fsck is recommended
[ 30.725247] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 31.197156] ACPI: AC Adapter [AC0] (off-line)
[ 31.200465] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 31.205478] ACPI: Lid Switch [LID]
[ 31.205821] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 31.205840] ACPI: Sleep Button [SLPB]
[ 31.206194] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 31.206211] ACPI: Power Button [PWRB]
[ 31.206553] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 31.206568] ACPI: Power Button [PWRF]
[ 31.304518] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.331973] wmi: Mapper loaded
[ 31.380694] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 31.408518] ACPI: Battery Slot [BAT0] (battery present)
[ 31.522486] ACPI Warning: SystemIO range 0x00000828-0x0000082f conflicts with OpRegion 0x00000800-0x0000087f (\PMIO) (20140424/utaddress-258)
[ 31.522507] ACPI Warning: SystemIO range 0x00000828-0x0000082f conflicts with OpRegion 0x00000828-0x0000082f (\_SB_.PCI0.SBRG.IELK.GPSE) (20140424/utaddress-258)
[ 31.522520] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 31.522528] ACPI Warning: SystemIO range 0x000004b0-0x000004bf conflicts with OpRegion 0x00000480-0x000004bf (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-258)
[ 31.522541] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 31.522546] ACPI Warning: SystemIO range 0x00000480-0x000004af conflicts with OpRegion 0x00000480-0x000004bf (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-258)
[ 31.522558] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 31.522563] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 31.955098] [drm] Initialized drm 1.1.0 20060810
[ 32.107535] cfg80211: Calling CRDA to update world regulatory domain
[ 32.221198] [drm] Memory usable by graphics device = 512M
[ 32.221210] [drm] Replacing VGA console driver
[ 32.222001] Console: switching to colour dummy device 80x25
[ 32.244209] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 32.244238] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 32.244242] [drm] Driver supports precise vblank timestamp query.
[ 32.244381] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 32.332192] [drm] initialized overlay support
[ 32.353644] fbcon: inteldrmfb (fb0) is primary device
[ 32.515165] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x140100)
[ 32.577973] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[ 32.888119] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 32.952411] asus_wmi: ASUS WMI generic driver loaded
[ 33.084255] Console: switching to colour frame buffer device 128x37
[ 33.092832] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 33.092839] i915 0000:00:02.0: registered panic notifier
[ 33.112346] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 33.126688] acpi device:2b: registered as cooling_device4
[ 33.127046] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 33.127398] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 33.128669] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 33.129010] asus_wmi: Initialization: 0x0
[ 33.129125] asus_wmi: BIOS WMI version: 0.8
[ 33.129360] asus_wmi: SFUN value: 0x0
[ 33.132323] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
[ 33.286853] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 33.286863] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 33.286870] sound hdaudioC0D0: hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[ 33.286876] sound hdaudioC0D0: mono: mono_out=0x0
[ 33.286880] sound hdaudioC0D0: inputs:
[ 33.286887] sound hdaudioC0D0: Mic=0x12
[ 33.294899] input: HDA Intel Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 33.298414] iTCO_vendor_support: vendor-support=0
[ 33.299472] ath: phy0: ASPM enabled: 0x42
[ 33.299481] ath: EEPROM regdomain: 0x60
[ 33.299485] ath: EEPROM indicates we should expect a direct regpair map
[ 33.299491] ath: Country alpha2 being used: 00
[ 33.299494] ath: Regpair used: 0x60
[ 33.402258] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 33.552148] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 33.552252] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 33.552648] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 34.108082] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 34.293237] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 34.294024] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8520000, irq=17
[ 34.736738] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 34.886561] Adding 974844k swap on /dev/mapper/VG-swap. Priority:-1 extents:1 across:974844k FS
[ 35.149497] asus_wmi: Backlight controlled by ACPI video driver
[ 36.750975] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 37.210750] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 37.232989] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 39.168376] systemd-journald[259]: Received request to flush runtime journal from PID 1
[ 39.625031] zram: Created 4 device(s) ...
[ 39.739418] zram0: detected capacity change from 0 to 196243456
[ 39.944375] Adding 191640k swap on /dev/zram0. Priority:10 extents:1 across:191640k SSFS
[ 39.945467] zram1: detected capacity change from 0 to 196243456
[ 39.956288] Adding 191640k swap on /dev/zram1. Priority:10 extents:1 across:191640k SSFS
[ 39.957396] zram2: detected capacity change from 0 to 196243456
[ 39.970962] Adding 191640k swap on /dev/zram2. Priority:10 extents:1 across:191640k SSFS
[ 39.972285] zram3: detected capacity change from 0 to 196243456
[ 39.986350] Adding 191640k swap on /dev/zram3. Priority:10 extents:1 across:191640k SSFS
[ 40.850138] audit: type=1400 audit(1443613696.919:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session-wrapper" pid=865 comm="apparmor_parser"
[ 41.020825] audit: type=1400 audit(1443613697.091:3): apparmor="STATUS" operation="profile_load" name="lxc-container-default" pid=865 comm="apparmor_parser"
[ 41.020848] audit: type=1400 audit(1443613697.091:4): apparmor="STATUS" operation="profile_load" name="lxc-container-default-with-mounting" pid=865 comm="apparmor_parser"
[ 41.020866] audit: type=1400 audit(1443613697.091:5): apparmor="STATUS" operation="profile_load" name="lxc-container-default-with-nesting" pid=865 comm="apparmor_parser"
[ 41.086297] audit: type=1400 audit(1443613697.155:6): apparmor="STATUS" operation="profile_load" name="system_tor" pid=865 comm="apparmor_parser"
[ 41.114488] audit: type=1400 audit(1443613697.187:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/lxc-start" pid=865 comm="apparmor_parser"
[ 41.246117] audit: type=1400 audit(1443613697.315:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/skype" pid=865 comm="apparmor_parser"
[ 41.378862] audit: type=1400 audit(1443613697.447:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=865 comm="apparmor_parser"
[ 41.378887] audit: type=1400 audit(1443613697.447:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=865 comm="apparmor_parser"
[ 41.378906] audit: type=1400 audit(1443613697.447:11): apparmor="STATUS" operation="profile_load" name="third_party" pid=865 comm="apparmor_parser"
[ 42.363881] RPC: Registered named UNIX socket transport module.
[ 42.363890] RPC: Registered udp transport module.
[ 42.363894] RPC: Registered tcp transport module.
[ 42.363897] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 42.403600] FS-Cache: Loaded
[ 42.487928] FS-Cache: Netfs 'nfs' registered for caching
[ 42.577789] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 44.285496] apm: BIOS not found.
[ 44.859956] NET: Registered protocol family 4
[ 47.427044] vboxdrv: Found 4 processor cores.
[ 47.428569] vboxdrv: fAsync=0 offMin=0x38e offMax=0x1464
[ 47.428889] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 47.428898] vboxdrv: Successfully loaded version 4.3.30 (interface 0x001a000a).
[ 48.264189] vboxpci: IOMMU not found (not compiled)
[ 60.996144] usb 1-1: new high-speed USB device number 3 using ehci-pci
[ 61.154452] usb 1-1: New USB device found, idVendor=090c, idProduct=1000
[ 61.154465] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 61.154475] usb 1-1: Product: USB Flash Disk
[ 61.154484] usb 1-1: Manufacturer: General
[ 61.154492] usb 1-1: SerialNumber: GB00000000000514
[ 61.155382] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 61.159332] scsi5 : usb-storage 1-1:1.0
[ 62.358972] scsi 5:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
[ 62.360955] sd 5:0:0:0: [sdc] 7858176 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 62.361023] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 62.361835] sd 5:0:0:0: [sdc] Write Protect is off
[ 62.361849] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 62.362816] sd 5:0:0:0: [sdc] No Caching mode page found
[ 62.362829] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 62.368197] sdc: sdc1
[ 62.371818] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 65.484536] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 65.502933] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 65.541572] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 68.414128] wlan0: authenticate with c0:4a:00:50:c9:bc
[ 68.424190] wlan0: send auth to c0:4a:00:50:c9:bc (try 1/3)
[ 68.455133] wlan0: authenticated
[ 68.460096] wlan0: associate with c0:4a:00:50:c9:bc (try 1/3)
[ 68.557091] wlan0: RX AssocResp from c0:4a:00:50:c9:bc (capab=0x421 status=0 aid=1)
[ 68.557238] wlan0: associated
[ 68.558595] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 92.771990] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 101.517265] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 102.254981] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 199.188764] cfg80211: Calling CRDA to update world regulatory domain
[ 387.436179] usb 1-1: USB disconnect, device number 3
[ 388.480446] usb 1-2: USB disconnect, device number 2
[ 466.152173] perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 696.679542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 696.835753] wlan0: deauthenticating from c0:4a:00:50:c9:bc by local choice (Reason: 3=DEAUTH_LEAVING)
[ 696.844354] cfg80211: Calling CRDA to update world regulatory domain
[ 697.738173] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 698.972309] PM: Hibernation mode set to 'platform'
[ 699.190767] PM: Syncing filesystems ... done.
[ 702.200366] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 702.202733] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 702.202742] PM: Basic memory bitmaps created
[ 702.202792] PM: Preallocating image memory... done (allocated 139590 pages)
[ 702.592554] PM: Allocated 558360 kbytes in 0.38 seconds (1469.36 MB/s)
[ 702.592559] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 702.594337] Suspending console(s) (use no_console_suspend to debug)
[ 702.865149] PM: freeze of devices complete after 270.795 msecs
[ 702.865614] PM: late freeze of devices complete after 0.454 msecs
[ 702.866970] PM: noirq freeze of devices complete after 1.343 msecs
[ 702.867020] ACPI: Preparing to enter system sleep state S4
[ 703.360332] PM: Saving platform NVS memory
[ 703.360907] Disabling non-boot CPUs ...
[ 703.362749] kvm: disabling virtualization on CPU1
[ 703.464055] smpboot: CPU 1 is now offline
[ 703.466913] kvm: disabling virtualization on CPU2
[ 703.568058] smpboot: CPU 2 is now offline
[ 703.570618] kvm: disabling virtualization on CPU3
[ 703.672035] smpboot: CPU 3 is now offline
[ 703.673087] PM: Creating hibernation image:
[ 703.676011] PM: Need to copy 83290 pages
[ 703.676011] PM: Normal pages needed: 72357 + 1024, available pages: 154339
[ 703.676011] PM: Restoring platform NVS memory
[ 703.676011] Enabling non-boot CPUs ...
[ 703.676011] x86: Booting SMP configuration:
[ 703.676011] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 703.362766] Initializing CPU#1
[ 703.362766] kvm: enabling virtualization on CPU1
[ 703.685621] CPU1 is up
[ 703.685875] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 703.466923] Initializing CPU#2
[ 703.466923] kvm: enabling virtualization on CPU2
[ 703.698158] CPU2 is up
[ 703.698397] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 703.570636] Initializing CPU#3
[ 703.570636] kvm: enabling virtualization on CPU3
[ 703.710762] CPU3 is up
[ 703.712564] ACPI: Waking up from system sleep state S4
[ 703.744169] PM: noirq restore of devices complete after 15.856 msecs
[ 703.744617] PM: early restore of devices complete after 0.392 msecs
[ 703.805419] usb usb2: root hub lost power or was reset
[ 703.805454] usb usb3: root hub lost power or was reset
[ 703.805489] usb usb4: root hub lost power or was reset
[ 703.805513] usb usb5: root hub lost power or was reset
[ 703.805546] usb usb1: root hub lost power or was reset
[ 703.805838] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 703.806623] ath: phy0: ASPM enabled: 0x43
[ 703.809471] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 703.813161] sd 0:0:0:0: [sda] Starting disk
[ 704.132168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 704.134837] ata1.00: unexpected _GTF length (8)
[ 704.138074] ata1.00: unexpected _GTF length (8)
[ 704.138529] ata1.00: configured for UDMA/133
[ 704.574160] PM: restore of devices complete after 769.124 msecs
[ 704.574612] PM: Image restored successfully.
[ 704.574637] PM: Basic memory bitmaps freed
[ 704.574642] Restarting tasks ... done.
[ 704.665837] video LNXVIDEO:00: Restoring backlight state
[ 704.708065] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 705.222163] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 705.282313] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 705.298260] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 705.321648] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 705.924076] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 706.571540] cfg80211: Calling CRDA to update world regulatory domain
[ 707.324313] wlan0: authenticate with ec:43:f6:dd:3a:40
[ 707.342252] wlan0: send auth to ec:43:f6:dd:3a:40 (try 1/3)
[ 707.345444] wlan0: authenticated
[ 707.348165] wlan0: associate with ec:43:f6:dd:3a:40 (try 1/3)
[ 707.352077] wlan0: RX AssocResp from ec:43:f6:dd:3a:40 (capab=0x411 status=0 aid=3)
[ 707.352256] wlan0: associated
[ 707.352534] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 707.352718] cfg80211: Calling CRDA to update world regulatory domain
[ 845.063689] perf interrupt took too long (5013 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 940.615613] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 940.723179] wlan0: deauthenticating from ec:43:f6:dd:3a:40 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 940.732458] cfg80211: Calling CRDA for country: RU
[ 941.997061] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 942.119007] PM: Hibernation mode set to 'platform'
[ 942.120626] PM: Syncing filesystems ... done.
[ 943.027884] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 943.030535] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 943.030544] PM: Basic memory bitmaps created
[ 943.030596] PM: Preallocating image memory... done (allocated 139622 pages)
[ 944.349072] PM: Allocated 558488 kbytes in 1.31 seconds (426.32 MB/s)
[ 944.349077] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 944.350922] Suspending console(s) (use no_console_suspend to debug)
[ 944.368150] PM: freeze of devices complete after 17.207 msecs
[ 944.368614] PM: late freeze of devices complete after 0.453 msecs
[ 944.370188] PM: noirq freeze of devices complete after 1.563 msecs
[ 944.370230] ACPI: Preparing to enter system sleep state S4
[ 944.860331] PM: Saving platform NVS memory
[ 944.860886] Disabling non-boot CPUs ...
[ 944.862486] kvm: disabling virtualization on CPU1
[ 944.862513] smpboot: CPU 1 is now offline
[ 944.865523] kvm: disabling virtualization on CPU2
[ 944.968071] smpboot: CPU 2 is now offline
[ 944.970327] kvm: disabling virtualization on CPU3
[ 944.970349] smpboot: CPU 3 is now offline
[ 944.971887] PM: Creating hibernation image:
[ 944.973176] PM: Need to copy 83028 pages
[ 944.973176] PM: Normal pages needed: 68747 + 1024, available pages: 157950
[ 944.973176] PM: Restoring platform NVS memory
[ 944.973176] Enabling non-boot CPUs ...
[ 944.973176] x86: Booting SMP configuration:
[ 944.973176] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 944.862497] Initializing CPU#1
[ 944.862497] kvm: enabling virtualization on CPU1
[ 944.984500] CPU1 is up
[ 944.984747] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 944.865540] Initializing CPU#2
[ 944.865540] kvm: enabling virtualization on CPU2
[ 944.997055] CPU2 is up
[ 944.997294] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 944.970336] Initializing CPU#3
[ 944.970336] kvm: enabling virtualization on CPU3
[ 945.009756] CPU3 is up
[ 945.011522] ACPI: Waking up from system sleep state S4
[ 945.044155] PM: noirq restore of devices complete after 15.861 msecs
[ 945.044684] PM: early restore of devices complete after 0.466 msecs
[ 945.111965] usb usb2: root hub lost power or was reset
[ 945.112008] usb usb3: root hub lost power or was reset
[ 945.112078] usb usb4: root hub lost power or was reset
[ 945.112133] usb usb5: root hub lost power or was reset
[ 945.112172] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 945.112177] usb usb1: root hub lost power or was reset
[ 945.113421] ath: phy0: ASPM enabled: 0x43
[ 945.114293] sd 0:0:0:0: [sda] Starting disk
[ 945.116076] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 945.432101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 945.434687] ata1.00: unexpected _GTF length (8)
[ 945.437860] ata1.00: unexpected _GTF length (8)
[ 945.438269] ata1.00: configured for UDMA/133
[ 945.838163] PM: restore of devices complete after 726.836 msecs
[ 945.838619] PM: Image restored successfully.
[ 945.838637] PM: Basic memory bitmaps freed
[ 945.838641] Restarting tasks ... done.
[ 945.944362] video LNXVIDEO:00: Restoring backlight state
[ 946.000115] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 946.514225] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 946.647151] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 946.662034] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 946.708780] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 947.216090] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 949.211426] cfg80211: Calling CRDA for country: RU
[ 1418.408954] wlan0: authenticate with 00:19:cb:8d:14:cf
[ 1418.427608] wlan0: direct probe to 00:19:cb:8d:14:cf (try 1/3)
[ 1418.628108] wlan0: direct probe to 00:19:cb:8d:14:cf (try 2/3)
[ 1418.832125] wlan0: direct probe to 00:19:cb:8d:14:cf (try 3/3)
[ 1419.036066] wlan0: authentication with 00:19:cb:8d:14:cf timed out
[ 4840.462467] Bluetooth: Core ver 2.19
[ 4840.462540] NET: Registered protocol family 31
[ 4840.462546] Bluetooth: HCI device and connection manager initialized
[ 4840.462568] Bluetooth: HCI socket layer initialized
[ 4840.462582] Bluetooth: L2CAP socket layer initialized
[ 4840.462620] Bluetooth: SCO socket layer initialized
[ 4902.526990] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4902.539472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4902.600354] PM: Hibernation mode set to 'platform'
[ 4902.608384] PM: Syncing filesystems ... done.
[ 4903.219566] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4903.222402] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4903.222411] PM: Basic memory bitmaps created
[ 4903.222459] PM: Preallocating image memory... done (allocated 139608 pages)
[ 4904.224282] PM: Allocated 558432 kbytes in 1.00 seconds (558.43 MB/s)
[ 4904.224287] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4904.226060] Suspending console(s) (use no_console_suspend to debug)
[ 4904.244144] PM: freeze of devices complete after 18.065 msecs
[ 4904.244955] PM: late freeze of devices complete after 0.790 msecs
[ 4904.247008] PM: noirq freeze of devices complete after 2.039 msecs
[ 4904.247059] ACPI: Preparing to enter system sleep state S4
[ 4904.744532] PM: Saving platform NVS memory
[ 4904.745308] Disabling non-boot CPUs ...
[ 4904.747071] kvm: disabling virtualization on CPU1
[ 4904.848048] smpboot: CPU 1 is now offline
[ 4904.850347] kvm: disabling virtualization on CPU2
[ 4904.952077] smpboot: CPU 2 is now offline
[ 4904.954761] kvm: disabling virtualization on CPU3
[ 4905.056180] smpboot: CPU 3 is now offline
[ 4905.057166] PM: Creating hibernation image:
[ 4905.060011] PM: Need to copy 79409 pages
[ 4905.060011] PM: Normal pages needed: 70342 + 1024, available pages: 156346
[ 4905.060011] PM: Restoring platform NVS memory
[ 4905.060011] Enabling non-boot CPUs ...
[ 4905.060011] x86: Booting SMP configuration:
[ 4905.060011] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4904.747087] Initializing CPU#1
[ 4904.747087] kvm: enabling virtualization on CPU1
[ 4905.069689] CPU1 is up
[ 4905.069934] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4904.850358] Initializing CPU#2
[ 4904.850358] kvm: enabling virtualization on CPU2
[ 4905.082216] CPU2 is up
[ 4905.082457] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4904.954775] Initializing CPU#3
[ 4904.954775] kvm: enabling virtualization on CPU3
[ 4905.094806] CPU3 is up
[ 4905.096644] ACPI: Waking up from system sleep state S4
[ 4905.128157] PM: noirq restore of devices complete after 15.844 msecs
[ 4905.128636] PM: early restore of devices complete after 0.421 msecs
[ 4905.185378] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 4905.185888] usb usb3: root hub lost power or was reset
[ 4905.185902] usb usb2: root hub lost power or was reset
[ 4905.185905] usb usb4: root hub lost power or was reset
[ 4905.185956] usb usb5: root hub lost power or was reset
[ 4905.186033] usb usb1: root hub lost power or was reset
[ 4905.187059] ath: phy0: ASPM enabled: 0x43
[ 4905.189963] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 4905.192617] sd 0:0:0:0: [sda] Starting disk
[ 4905.508075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4905.510677] ata1.00: unexpected _GTF length (8)
[ 4905.513796] ata1.00: unexpected _GTF length (8)
[ 4905.514217] ata1.00: configured for UDMA/133
[ 4905.918172] PM: restore of devices complete after 733.299 msecs
[ 4905.918628] PM: Image restored successfully.
[ 4905.918651] PM: Basic memory bitmaps freed
[ 4905.918656] Restarting tasks ... done.
[ 4905.986333] video LNXVIDEO:00: Restoring backlight state
[ 4906.084099] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 4906.254783] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 4906.270420] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4906.296100] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4906.599299] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 4907.300117] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 4907.353688] Uhhuh. NMI received for unknown reason 2c on CPU 0.
[ 4907.353700] Do you have a strange power saving mode enabled?
[ 4907.353706] Dazed and confused, but trying to continue
[ 4907.401972] wlan0: authenticate with c0:4a:00:50:c9:bc
[ 4907.410183] wlan0: send auth to c0:4a:00:50:c9:bc (try 1/3)
[ 4907.412294] wlan0: authenticated
[ 4907.416147] wlan0: associate with c0:4a:00:50:c9:bc (try 1/3)
[ 4907.419690] wlan0: RX AssocResp from c0:4a:00:50:c9:bc (capab=0x421 status=0 aid=10)
[ 4907.419856] wlan0: associated
[ 4907.419939] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5735.491655] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5735.597335] wlan0: deauthenticating from c0:4a:00:50:c9:bc by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5735.608464] cfg80211: Calling CRDA to update world regulatory domain
[ 5735.725101] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5735.844700] PM: Hibernation mode set to 'platform'
[ 5735.845909] PM: Syncing filesystems ... done.
[ 5736.273714] Freezing user space processes ... (elapsed 0.016 seconds) done.
[ 5736.290706] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 5736.290714] PM: Basic memory bitmaps created
[ 5736.290770] PM: Preallocating image memory... done (allocated 139622 pages)
[ 5736.951218] PM: Allocated 558488 kbytes in 0.66 seconds (846.19 MB/s)
[ 5736.951223] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5736.952949] Suspending console(s) (use no_console_suspend to debug)
[ 5736.972143] PM: freeze of devices complete after 19.174 msecs
[ 5736.973011] PM: late freeze of devices complete after 0.853 msecs
[ 5736.974576] PM: noirq freeze of devices complete after 1.550 msecs
[ 5736.974625] ACPI: Preparing to enter system sleep state S4
[ 5737.472537] PM: Saving platform NVS memory
[ 5737.473313] Disabling non-boot CPUs ...
[ 5737.475078] kvm: disabling virtualization on CPU1
[ 5737.576053] smpboot: CPU 1 is now offline
[ 5737.578273] kvm: disabling virtualization on CPU2
[ 5737.680060] smpboot: CPU 2 is now offline
[ 5737.682539] kvm: disabling virtualization on CPU3
[ 5737.784033] smpboot: CPU 3 is now offline
[ 5737.784976] PM: Creating hibernation image:
[ 5737.788010] PM: Need to copy 68451 pages
[ 5737.788010] PM: Normal pages needed: 61108 + 1024, available pages: 165584
[ 5737.788010] PM: Restoring platform NVS memory
[ 5737.788010] Enabling non-boot CPUs ...
[ 5737.788010] x86: Booting SMP configuration:
[ 5737.788010] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5737.475095] Initializing CPU#1
[ 5737.475095] kvm: enabling virtualization on CPU1
[ 5737.797515] CPU1 is up
[ 5737.797769] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 5737.578283] Initializing CPU#2
[ 5737.578283] kvm: enabling virtualization on CPU2
[ 5737.810056] CPU2 is up
[ 5737.810300] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5737.682554] Initializing CPU#3
[ 5737.682554] kvm: enabling virtualization on CPU3
[ 5737.822646] CPU3 is up
[ 5737.824460] ACPI: Waking up from system sleep state S4
[ 5737.856152] PM: noirq restore of devices complete after 15.859 msecs
[ 5737.856628] PM: early restore of devices complete after 0.417 msecs
[ 5737.907761] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5737.907975] usb usb3: root hub lost power or was reset
[ 5737.907993] usb usb2: root hub lost power or was reset
[ 5737.908072] usb usb5: root hub lost power or was reset
[ 5737.908130] usb usb4: root hub lost power or was reset
[ 5737.908184] usb usb1: root hub lost power or was reset
[ 5737.909189] ath: phy0: ASPM enabled: 0x43
[ 5737.912088] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 5737.915396] sd 0:0:0:0: [sda] Starting disk
[ 5738.232087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5738.233827] ata1.00: unexpected _GTF length (8)
[ 5738.235930] ata1.00: unexpected _GTF length (8)
[ 5738.236222] ata1.00: configured for UDMA/133
[ 5738.666176] PM: restore of devices complete after 759.096 msecs
[ 5738.666632] PM: Image restored successfully.
[ 5738.666650] PM: Basic memory bitmaps freed
[ 5738.666654] Restarting tasks ... done.
[ 5738.735935] video LNXVIDEO:00: Restoring backlight state
[ 5738.772100] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 5739.139822] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 5739.158205] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5739.181699] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5739.289646] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 5739.992089] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 6332.698879] cfg80211: Calling CRDA to update world regulatory domain
[ 9639.394946] glxgears[9869]: segfault at 18 ip b6caa5c1 sp bf923ce0 error 4 in i915_dri.so[b69ea000+5aa000]
[11141.944279] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[11141.957610] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11142.192369] PM: Hibernation mode set to 'platform'
[11142.221524] PM: Syncing filesystems ... done.
[11142.907837] Freezing user space processes ... (elapsed 0.004 seconds) done.
[11142.912623] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[11142.912632] PM: Basic memory bitmaps created
[11142.912686] PM: Preallocating image memory...
[11155.477773] PM: Basic memory bitmaps freed
[11155.477784] Restarting tasks ... done.
[11155.570629] video LNXVIDEO:00: Restoring backlight state
[11157.980145] usb 1-6: new high-speed USB device number 4 using ehci-pci
[11159.032116] usb 1-6: New USB device found, idVendor=13d3, idProduct=5702
[11159.032126] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[11159.032132] usb 1-6: Product: USB2.0 UVC VGA WebCam
[11159.032138] usb 1-6: Manufacturer: Azurewave
[11159.032143] usb 1-6: SerialNumber: 200901010001
[11167.931128] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[11167.947105] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[11168.466694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11172.359902] media: Linux media interface: v0.10
[11172.517237] Linux video capture interface: v2.00
[11172.718017] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[11172.737842] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11
[11172.738120] usbcore: registered new interface driver uvcvideo
[11172.738126] USB Video Class driver (1.1.1)
[11186.688211] usb 1-6: USB disconnect, device number 4
[11197.575156] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[11197.589094] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11197.832603] PM: Hibernation mode set to 'platform'
[11197.834058] PM: Syncing filesystems ... done.
[11198.430216] Freezing user space processes ... (elapsed 0.017 seconds) done.
[11198.447320] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[11198.447328] PM: Basic memory bitmaps created
[11198.447376] PM: Preallocating image memory... done (allocated 127773 pages)
[11200.815423] PM: Allocated 511092 kbytes in 2.36 seconds (216.56 MB/s)
[11200.815439] Freezing remaining freezable tasks ... (elapsed 0.048 seconds) done.
[11200.864562] Suspending console(s) (use no_console_suspend to debug)
[11201.068400] PM: freeze of devices complete after 203.815 msecs
[11201.068980] PM: late freeze of devices complete after 0.566 msecs
[11201.070482] PM: noirq freeze of devices complete after 1.489 msecs
[11201.070528] ACPI: Preparing to enter system sleep state S4
[11201.560342] PM: Saving platform NVS memory
[11201.560867] Disabling non-boot CPUs ...
[11201.562415] kvm: disabling virtualization on CPU1
[11201.562439] smpboot: CPU 1 is now offline
[11201.564768] kvm: disabling virtualization on CPU2
[11201.564892] smpboot: CPU 2 is now offline
[11201.566997] kvm: disabling virtualization on CPU3
[11201.668034] smpboot: CPU 3 is now offline
[11201.669009] PM: Creating hibernation image:
[11201.672010] PM: Need to copy 120330 pages
[11201.672010] PM: Normal pages needed: 111441 + 1024, available pages: 130368
[11201.672010] PM: Restoring platform NVS memory
[11201.672010] Enabling non-boot CPUs ...
[11201.672010] x86: Booting SMP configuration:
[11201.672010] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11201.562426] Initializing CPU#1
[11201.562426] kvm: enabling virtualization on CPU1
[11201.681555] CPU1 is up
[11201.681816] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11201.564782] Initializing CPU#2
[11201.564782] kvm: enabling virtualization on CPU2
[11201.694100] CPU2 is up
[11201.694338] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11201.567007] Initializing CPU#3
[11201.567007] kvm: enabling virtualization on CPU3
[11201.706735] CPU3 is up
[11201.708556] ACPI: Waking up from system sleep state S4
[11201.740162] PM: noirq restore of devices complete after 15.848 msecs
[11201.740601] PM: early restore of devices complete after 0.381 msecs
[11201.820216] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[11201.820453] usb usb3: root hub lost power or was reset
[11201.820463] usb usb2: root hub lost power or was reset
[11201.820508] usb usb4: root hub lost power or was reset
[11201.820518] usb usb5: root hub lost power or was reset
[11201.820554] usb usb1: root hub lost power or was reset
[11201.821621] ath: phy0: ASPM enabled: 0x43
[11201.824471] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[11201.825009] sd 0:0:0:0: [sda] Starting disk
[11202.144101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[11202.146721] ata1.00: unexpected _GTF length (8)
[11202.149887] ata1.00: unexpected _GTF length (8)
[11202.150295] ata1.00: configured for UDMA/133
[11202.569017] PM: restore of devices complete after 749.612 msecs
[11202.569465] PM: Image restored successfully.
[11202.569482] PM: Basic memory bitmaps freed
[11202.569486] Restarting tasks ... done.
[11202.672050] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[11202.691167] video LNXVIDEO:00: Restoring backlight state
[11203.186223] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[11203.888117] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[11215.866018] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[11215.883500] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[11216.050682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11217.007626] cfg80211: Calling CRDA to update world regulatory domain
[11217.457071] wlan0: authenticate with ec:43:f6:dd:3a:40
[11217.471456] wlan0: send auth to ec:43:f6:dd:3a:40 (try 1/3)
[11217.473248] wlan0: authenticated
[11217.476231] wlan0: associate with ec:43:f6:dd:3a:40 (try 1/3)
[11217.480243] wlan0: RX AssocResp from ec:43:f6:dd:3a:40 (capab=0x411 status=0 aid=3)
[11217.480387] wlan0: associated
[11217.480473] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[11217.480575] cfg80211: Calling CRDA to update world regulatory domain
[11991.837963] quakespasm[11582]: segfault at 58 ip b22c83a6 sp bfb5b070 error 4 in i915_dri.so[b2007000+5aa000]
[12025.870190] [sched_delayed] 4CE: hpet increased min_delta_ns to 20115 nsec
[12025.870419] [sched_delayed] 4CE: hpet increased min_delta_ns to 30172 nsec
[12186.325928] quakespasm[11745]: segfault at 58 ip b238c3a6 sp bfa684e0 error 4 in i915_dri.so[b20cb000+5aa000]
[12414.645518] [sched_delayed] 4CE: hpet increased min_delta_ns to 45258 nsec
[13304.687872] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[13305.022387] wlan0: deauthenticating from ec:43:f6:dd:3a:40 by local choice (Reason: 3=DEAUTH_LEAVING)
[13305.031627] cfg80211: Calling CRDA to update world regulatory domain
[13306.841872] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13307.363053] PM: Hibernation mode set to 'platform'
[13307.376244] PM: Syncing filesystems ... done.
[13307.916789] Freezing user space processes ... (elapsed 0.031 seconds) done.
[13307.948753] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[13307.948762] PM: Basic memory bitmaps created
[13307.948810] PM: Preallocating image memory... done (allocated 139622 pages)
[13312.601640] PM: Allocated 558488 kbytes in 4.65 seconds (120.10 MB/s)
[13312.601645] Freezing remaining freezable tasks ... (elapsed 0.006 seconds) done.
[13312.608663] Suspending console(s) (use no_console_suspend to debug)
[13312.640197] PM: freeze of devices complete after 31.507 msecs
[13312.641196] PM: late freeze of devices complete after 0.985 msecs
[13312.643070] PM: noirq freeze of devices complete after 1.857 msecs
[13312.643123] ACPI: Preparing to enter system sleep state S4
[13313.140533] PM: Saving platform NVS memory
[13313.141298] Disabling non-boot CPUs ...
[13313.143127] kvm: disabling virtualization on CPU1
[13313.244054] smpboot: CPU 1 is now offline
[13313.246782] kvm: disabling virtualization on CPU2
[13313.348051] smpboot: CPU 2 is now offline
[13313.350565] kvm: disabling virtualization on CPU3
[13313.452036] smpboot: CPU 3 is now offline
[13313.453059] PM: Creating hibernation image:
[13313.456011] PM: Need to copy 106831 pages
[13313.456011] PM: Normal pages needed: 103858 + 1024, available pages: 149787
[13313.456011] PM: Restoring platform NVS memory
[13313.456011] Enabling non-boot CPUs ...
[13313.456011] x86: Booting SMP configuration:
[13313.456011] smpboot: Booting Node 0 Processor 1 APIC 0x2
[13313.143142] Initializing CPU#1
[13313.143142] kvm: enabling virtualization on CPU1
[13313.465603] CPU1 is up
[13313.465864] smpboot: Booting Node 0 Processor 2 APIC 0x1
[13313.246794] Initializing CPU#2
[13313.246794] kvm: enabling virtualization on CPU2
[13313.478157] CPU2 is up
[13313.478395] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13313.350580] Initializing CPU#3
[13313.350580] kvm: enabling virtualization on CPU3
[13313.490741] CPU3 is up
[13313.492535] ACPI: Waking up from system sleep state S4
[13313.524167] PM: noirq restore of devices complete after 15.889 msecs
[13313.524579] PM: early restore of devices complete after 0.354 msecs
[13313.593311] usb usb2: root hub lost power or was reset
[13313.593361] usb usb3: root hub lost power or was reset
[13313.593401] usb usb4: root hub lost power or was reset
[13313.593440] usb usb5: root hub lost power or was reset
[13313.593474] usb usb1: root hub lost power or was reset
[13313.596489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[13313.597355] ath: phy0: ASPM enabled: 0x43
[13313.597391] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[13313.603152] sd 0:0:0:0: [sda] Starting disk
[13313.924186] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[13313.926843] ata1.00: unexpected _GTF length (8)
[13313.930071] ata1.00: unexpected _GTF length (8)
[13313.930514] ata1.00: configured for UDMA/133
[13314.370220] PM: restore of devices complete after 777.139 msecs
[13314.370682] PM: Image restored successfully.
[13314.370700] PM: Basic memory bitmaps freed
[13314.370704] Restarting tasks ... done.
[13314.449482] video LNXVIDEO:00: Restoring backlight state
[13314.456076] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[13314.970326] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[13315.672076] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[13319.661739] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[13319.678272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[13320.014185] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13323.823558] cfg80211: Calling CRDA to update world regulatory domain
[13324.592945] wlan0: authenticate with ec:43:f6:dd:3a:40
[13324.610974] wlan0: send auth to ec:43:f6:dd:3a:40 (try 1/3)
[13324.612917] wlan0: authenticated
[13324.618404] wlan0: associate with ec:43:f6:dd:3a:40 (try 1/3)
[13324.623755] wlan0: RX AssocResp from ec:43:f6:dd:3a:40 (capab=0x411 status=0 aid=2)
[13324.623908] wlan0: associated
[13324.624054] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[13324.624328] cfg80211: Calling CRDA to update world regulatory domain
[14534.259052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[14534.366214] wlan0: deauthenticating from ec:43:f6:dd:3a:40 by local choice (Reason: 3=DEAUTH_LEAVING)
[14534.376241] cfg80211: Calling CRDA for country: RU
[14535.657500] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14535.791895] PM: Syncing filesystems ... done.
[14536.172693] PM: Preparing system for mem sleep
[14536.172879] Freezing user space processes ... (elapsed 0.002 seconds) done.
[14536.175266] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[14536.176231] PM: Entering mem sleep
[14536.176288] Suspending console(s) (use no_console_suspend to debug)
[14536.176915] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14536.314290] sd 0:0:0:0: [sda] Stopping disk
[14536.948181] PM: suspend of devices complete after 771.600 msecs
[14536.964116] PM: late suspend of devices complete after 15.919 msecs
[14536.980287] PM: noirq suspend of devices complete after 16.158 msecs
[14536.980321] ACPI: Preparing to enter system sleep state S3
[14537.488332] PM: Saving platform NVS memory
[14537.488891] Disabling non-boot CPUs ...
[14537.490694] kvm: disabling virtualization on CPU1
[14537.592042] smpboot: CPU 1 is now offline
[14537.594427] kvm: disabling virtualization on CPU2
[14537.696060] smpboot: CPU 2 is now offline
[14537.698785] kvm: disabling virtualization on CPU3
[14537.800035] smpboot: CPU 3 is now offline
[14537.800539] ACPI: Low-level resume complete
[14537.800539] PM: Restoring platform NVS memory
[14537.800539] Enabling non-boot CPUs ...
[14537.800539] x86: Booting SMP configuration:
[14537.800539] smpboot: Booting Node 0 Processor 1 APIC 0x2
[14537.490713] Initializing CPU#1
[14537.490713] kvm: enabling virtualization on CPU1
[14537.813542] CPU1 is up
[14537.813798] smpboot: Booting Node 0 Processor 2 APIC 0x1
[14537.594438] Initializing CPU#2
[14537.594438] kvm: enabling virtualization on CPU2
[14537.826079] CPU2 is up
[14537.826318] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14537.698799] Initializing CPU#3
[14537.698799] kvm: enabling virtualization on CPU3
[14537.838657] CPU3 is up
[14537.840425] ACPI: Waking up from system sleep state S3
[14537.904836] PM: noirq resume of devices complete after 16.558 msecs
[14537.905427] PM: early resume of devices complete after 0.533 msecs
[14537.905752] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[14537.905934] usb usb2: root hub lost power or was reset
[14537.905980] usb usb3: root hub lost power or was reset
[14537.906023] usb usb4: root hub lost power or was reset
[14537.906065] usb usb5: root hub lost power or was reset
[14537.907209] ath: phy0: ASPM enabled: 0x43
[14537.916485] sd 0:0:0:0: [sda] Starting disk
[14538.016213] PM: resume of devices complete after 110.776 msecs
[14538.016717] PM: Finishing wakeup.
[14538.016721] Restarting tasks ... done.
[14538.186471] video LNXVIDEO:00: Restoring backlight state
[14538.201996] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[14538.218683] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[14538.243348] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14538.816097] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[14539.330372] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[14539.528144] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14539.530263] ata1.00: unexpected _GTF length (8)
[14539.689927] ata1.00: unexpected _GTF length (8)
[14539.690301] ata1.00: configured for UDMA/133
[14540.032138] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[14540.500592] cfg80211: Calling CRDA for country: RU
[14540.946623] wlan0: authenticate with ec:43:f6:dd:3a:40
[14540.953982] wlan0: send auth to ec:43:f6:dd:3a:40 (try 1/3)
[14540.955875] wlan0: authenticated
[14540.960107] wlan0: associate with ec:43:f6:dd:3a:40 (try 1/3)
[14540.964139] wlan0: RX AssocResp from ec:43:f6:dd:3a:40 (capab=0x411 status=0 aid=2)
[14540.964310] wlan0: associated
[14540.964423] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14684.355288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[14684.489571] wlan0: deauthenticating from ec:43:f6:dd:3a:40 by local choice (Reason: 3=DEAUTH_LEAVING)
[14684.500103] cfg80211: Calling CRDA to update world regulatory domain
[14686.241328] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14686.459556] PM: Hibernation mode set to 'platform'
[14686.466276] PM: Syncing filesystems ... done.
[14686.962347] Freezing user space processes ... (elapsed 0.017 seconds) done.
[14686.979605] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[14686.979614] PM: Basic memory bitmaps created
[14686.979668] PM: Preallocating image memory... done (allocated 139603 pages)
[14687.951181] PM: Allocated 558412 kbytes in 0.97 seconds (575.68 MB/s)
[14687.951186] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14687.953018] Suspending console(s) (use no_console_suspend to debug)
[14687.972166] PM: freeze of devices complete after 19.126 msecs
[14687.972813] PM: late freeze of devices complete after 0.636 msecs
[14687.974320] PM: noirq freeze of devices complete after 1.496 msecs
[14687.974359] ACPI: Preparing to enter system sleep state S4
[14687.975468] PM: Saving platform NVS memory
[14687.976086] Disabling non-boot CPUs ...
[14687.977814] kvm: disabling virtualization on CPU1
[14688.080082] smpboot: CPU 1 is now offline
[14688.082992] kvm: disabling virtualization on CPU2
[14688.184053] smpboot: CPU 2 is now offline
[14688.186655] kvm: disabling virtualization on CPU3
[14688.288035] smpboot: CPU 3 is now offline
[14688.289136] PM: Creating hibernation image:
[14688.292011] PM: Need to copy 82445 pages
[14688.292011] PM: Normal pages needed: 69493 + 1024, available pages: 157199
[14688.292011] PM: Restoring platform NVS memory
[14688.292011] Enabling non-boot CPUs ...
[14688.292011] x86: Booting SMP configuration:
[14688.292011] smpboot: Booting Node 0 Processor 1 APIC 0x2
[14687.977830] Initializing CPU#1
[14687.977830] kvm: enabling virtualization on CPU1
[14688.301650] CPU1 is up
[14688.301909] smpboot: Booting Node 0 Processor 2 APIC 0x1
[14688.083005] Initializing CPU#2
[14688.083005] kvm: enabling virtualization on CPU2
[14688.314221] CPU2 is up
[14688.314449] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14688.186673] Initializing CPU#3
[14688.186673] kvm: enabling virtualization on CPU3
[14688.326831] CPU3 is up
[14688.328628] ACPI: Waking up from system sleep state S4
[14688.360185] PM: noirq restore of devices complete after 15.696 msecs
[14688.360589] PM: early restore of devices complete after 0.349 msecs
[14688.425723] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[14688.425954] usb usb3: root hub lost power or was reset
[14688.425969] usb usb2: root hub lost power or was reset
[14688.425971] usb usb4: root hub lost power or was reset
[14688.426021] usb usb5: root hub lost power or was reset
[14688.426069] usb usb1: root hub lost power or was reset
[14688.427110] ath: phy0: ASPM enabled: 0x43
[14688.427773] sd 0:0:0:0: [sda] Starting disk
[14688.429990] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[14688.744162] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14688.746783] ata1.00: unexpected _GTF length (8)
[14688.750085] ata1.00: unexpected _GTF length (8)
[14688.750553] ata1.00: configured for UDMA/133
[14689.122245] PM: restore of devices complete after 697.261 msecs
[14689.122749] PM: Image restored successfully.
[14689.122768] PM: Basic memory bitmaps freed
[14689.122773] Restarting tasks ... done.
[14689.192714] video LNXVIDEO:00: Restoring backlight state
[14689.296098] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[14689.798029] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[14689.810445] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[14689.814925] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[14690.512071] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[14690.577311] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[14693.101173] cfg80211: Calling CRDA to update world regulatory domain
[14693.752546] wlan0: authenticate with ec:43:f6:dd:3a:40
[14693.771001] wlan0: send auth to ec:43:f6:dd:3a:40 (try 1/3)
[14693.772772] wlan0: authenticated
[14693.776106] wlan0: associate with ec:43:f6:dd:3a:40 (try 1/3)
[14693.779956] wlan0: RX AssocResp from ec:43:f6:dd:3a:40 (capab=0x411 status=0 aid=2)
[14693.780128] wlan0: associated
[14693.780228] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[14693.780336] cfg80211: Calling CRDA to update world regulatory domain
[14792.795971] glxgears[14796]: segfault at 18 ip b6ce15c1 sp bf801e60 error 4 in i915_dri.so[b6a21000+5aa000]
[ 56.688]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 56.688] X Protocol Version 11, Revision 0
[ 56.688] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 56.688] Current Operating System: Linux infinitea 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) i686
[ 56.688] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=/dev/mapper/VG-root ro apparmor=1 security=apparmor pcie_aspm=force quiet
[ 56.688] Build Date: 11 February 2015 01:14:26AM
[ 56.688] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 56.688] Current version of pixman: 0.32.6
[ 56.688] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 56.689] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 56.689] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 30 14:48:32 2015
[ 56.771] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 56.771] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 56.895] (==) No Layout section. Using the first Screen section.
[ 56.896] (==) No screen section available. Using defaults.
[ 56.896] (**) |-->Screen "Default Screen Section" (0)
[ 56.896] (**) | |-->Monitor "<default monitor>"
[ 57.376] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 57.376] (==) Automatically adding devices
[ 57.376] (==) Automatically enabling devices
[ 57.376] (==) Automatically adding GPU devices
[ 57.726] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 57.726] Entry deleted from font path.
[ 57.880] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 57.880] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 57.880] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 57.880] (II) Loader magic: 0xb77c4700
[ 57.880] (II) Module ABI versions:
[ 57.880] X.Org ANSI C Emulation: 0.4
[ 57.880] X.Org Video Driver: 18.0
[ 57.881] X.Org XInput driver : 21.0
[ 57.881] X.Org Server Extension : 8.0
[ 57.881] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 57.886] (--) PCI:*(0:0:2:0) 8086:a011:1043:83ac rev 2, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7d00000/1048576, I/O @ 0x0000dc00/8
[ 57.886] (--) PCI: (0:0:2:1) 8086:a012:1043:83ac rev 2, Mem @ 0xf7e80000/524288
[ 58.069] (II) LoadModule: "glx"
[ 58.272] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 58.753] (II) Module glx: vendor="X.Org Foundation"
[ 58.753] compiled for 1.16.4, module version = 1.0.0
[ 58.753] ABI class: X.Org Server Extension, version 8.0
[ 58.753] (==) AIGLX enabled
[ 58.753] (==) Matched intel as autoconfigured driver 0
[ 58.753] (==) Matched intel as autoconfigured driver 1
[ 58.753] (==) Matched modesetting as autoconfigured driver 2
[ 58.753] (==) Matched fbdev as autoconfigured driver 3
[ 58.753] (==) Matched vesa as autoconfigured driver 4
[ 58.754] (==) Assigned the driver to the xf86ConfigLayout
[ 58.754] (II) LoadModule: "intel"
[ 58.786] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 59.124] (II) Module intel: vendor="X.Org Foundation"
[ 59.124] compiled for 1.15.99.904, module version = 2.21.15
[ 59.125] Module class: X.Org Video Driver
[ 59.125] ABI class: X.Org Video Driver, version 18.0
[ 59.125] (II) LoadModule: "modesetting"
[ 59.174] (WW) Warning, couldn't open module modesetting
[ 59.174] (II) UnloadModule: "modesetting"
[ 59.174] (II) Unloading modesetting
[ 59.174] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 59.174] (II) LoadModule: "fbdev"
[ 59.175] (WW) Warning, couldn't open module fbdev
[ 59.175] (II) UnloadModule: "fbdev"
[ 59.175] (II) Unloading fbdev
[ 59.175] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 59.175] (II) LoadModule: "vesa"
[ 59.176] (WW) Warning, couldn't open module vesa
[ 59.176] (II) UnloadModule: "vesa"
[ 59.176] (II) Unloading vesa
[ 59.176] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 59.176] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 59.182] (++) using VT number 7
[ 59.201] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 59.201] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 59.202] (==) intel(0): RGB weight 888
[ 59.202] (==) intel(0): Default visual is TrueColor
[ 59.202] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[ 59.202] (**) intel(0): Relaxed fencing enabled
[ 59.202] (**) intel(0): Wait on SwapBuffers? enabled
[ 59.202] (**) intel(0): Triple buffering? enabled
[ 59.202] (**) intel(0): Framebuffer tiled
[ 59.202] (**) intel(0): Pixmaps tiled
[ 59.202] (**) intel(0): 3D buffers tiled
[ 59.202] (**) intel(0): SwapBuffers wait enabled
[ 59.202] (==) intel(0): video overlay key set to 0x101fe
[ 59.203] (II) intel(0): Output LVDS1 has no monitor section
[ 59.203] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 59.248] (II) intel(0): Output VGA1 has no monitor section
[ 59.248] (II) intel(0): EDID for output LVDS1
[ 59.248] (II) intel(0): Manufacturer: IVO Model: 3f4 Serial#: 0
[ 59.248] (II) intel(0): Year: 2010 Week: 10
[ 59.248] (II) intel(0): EDID Version: 1.3
[ 59.248] (II) intel(0): Digital Display Input
[ 59.248] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 59.249] (II) intel(0): Gamma: 2.20
[ 59.249] (II) intel(0): No DPMS capabilities specified
[ 59.249] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 59.249] (II) intel(0): First detailed timing is preferred mode
[ 59.249] (II) intel(0): redX: 0.578 redY: 0.346 greenX: 0.336 greenY: 0.560
[ 59.249] (II) intel(0): blueX: 0.155 blueY: 0.122 whiteX: 0.312 whiteY: 0.328
[ 59.249] (II) intel(0): Manufacturer's mask: 0
[ 59.249] (II) intel(0): Supported detailed timing:
[ 59.249] (II) intel(0): clock: 50.4 MHz Image Size: 223 x 125 mm
[ 59.249] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1344 h_border: 0
[ 59.249] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 613 v_blanking: 625 v_border: 0
[ 59.249] (II) intel(0): Unknown vendor-specific block f
[ 59.249] (II) intel(0): InfoVision
[ 59.249] (II) intel(0): M101NWT2 R2
[ 59.249] (II) intel(0): EDID (in hex):
[ 59.249] (II) intel(0): 00ffffffffffff0026cff40300000000
[ 59.249] (II) intel(0): 0a14010380160d780a21d09458568f27
[ 59.249] (II) intel(0): 1f505400000001010101010101010101
[ 59.249] (II) intel(0): 010101010101b0130040415819203020
[ 59.249] (II) intel(0): 3a00df7d000000190000000f00000000
[ 59.250] (II) intel(0): 00000000000000000001000000fe0049
[ 59.250] (II) intel(0): 6e666f566973696f6e0a2020000000fe
[ 59.250] (II) intel(0): 004d3130314e575432205232200a0011
[ 59.250] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 59.250] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 59.250] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 59.250] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 59.250] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 59.250] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 59.251] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 59.251] (II) intel(0): Printing probed modes for output LVDS1
[ 59.251] (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 59.251] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 59.251] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 59.251] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 59.296] (II) intel(0): EDID for output VGA1
[ 59.296] (II) intel(0): Output LVDS1 connected
[ 59.296] (II) intel(0): Output VGA1 disconnected
[ 59.296] (II) intel(0): Using exact sizes for initial modes
[ 59.297] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 59.297] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 59.297] (II) intel(0): Kernel page flipping support detected, enabling
[ 59.297] (==) intel(0): DPI set to (96, 96)
[ 59.297] (II) Loading sub module "fb"
[ 59.297] (II) LoadModule: "fb"
[ 59.297] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 59.345] (II) Module fb: vendor="X.Org Foundation"
[ 59.345] compiled for 1.16.4, module version = 1.0.0
[ 59.345] ABI class: X.Org ANSI C Emulation, version 0.4
[ 59.345] (II) Loading sub module "dri2"
[ 59.345] (II) LoadModule: "dri2"
[ 59.345] (II) Module "dri2" already built-in
[ 59.345] (==) Depth 24 pixmap format is 32 bpp
[ 59.403] (II) intel(0): [DRI2] Setup complete
[ 59.403] (II) intel(0): [DRI2] DRI driver: i915
[ 59.403] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 59.536] (II) UXA(0): Driver registered support for the following operations:
[ 59.536] (II) solid
[ 59.536] (II) copy
[ 59.536] (II) composite (RENDER acceleration)
[ 59.536] (II) put_image
[ 59.536] (II) get_image
[ 59.536] (==) intel(0): Backing store enabled
[ 59.536] (==) intel(0): Silken mouse enabled
[ 59.542] (II) intel(0): Initializing HW Cursor
[ 59.543] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 59.560] (==) intel(0): DPMS enabled
[ 59.560] (==) intel(0): Intel XvMC decoder disabled
[ 59.560] (II) intel(0): Set up textured video
[ 59.560] (II) intel(0): Set up overlay video
[ 59.560] (II) intel(0): direct rendering: DRI2 Enabled
[ 59.561] (==) intel(0): hotplug detection: "enabled"
[ 59.580] (--) RandR disabled
[ 59.628] (II) SELinux: Disabled on system
[ 60.688] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 60.688] (II) AIGLX: enabled GLX_ARB_create_context
[ 60.688] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 60.688] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 60.688] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 60.688] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 60.688] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 60.689] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 60.689] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 60.689] (II) AIGLX: Loaded and initialized i915
[ 60.689] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 60.690] (II) intel(0): Setting screen physical size to 270 x 158
[ 62.411] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 62.412] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 62.412] (II) LoadModule: "evdev"
[ 62.413] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.536] (II) Module evdev: vendor="X.Org Foundation"
[ 62.536] compiled for 1.16.0, module version = 2.9.0
[ 62.536] Module class: X.Org XInput Driver
[ 62.536] ABI class: X.Org XInput driver, version 21.0
[ 62.536] (II) Using input driver 'evdev' for 'Power Button'
[ 62.536] (**) Power Button: always reports core events
[ 62.536] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 62.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 62.536] (--) evdev: Power Button: Found keys
[ 62.536] (II) evdev: Power Button: Configuring as keyboard
[ 62.537] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 62.537] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 62.537] (**) Option "xkb_rules" "evdev"
[ 62.537] (**) Option "xkb_model" "pc105"
[ 62.537] (**) Option "xkb_layout" "us,ru"
[ 62.537] (**) Option "xkb_variant" ","
[ 62.537] (**) Option "xkb_options" "grp:shift_caps_switch,grp_led:scroll"
[ 62.787] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 62.787] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 62.787] (II) Using input driver 'evdev' for 'Video Bus'
[ 62.787] (**) Video Bus: always reports core events
[ 62.787] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 62.788] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 62.788] (--) evdev: Video Bus: Found keys
[ 62.788] (II) evdev: Video Bus: Configuring as keyboard
[ 62.788] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event6"
[ 62.788] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 62.788] (**) Option "xkb_rules" "evdev"
[ 62.788] (**) Option "xkb_model" "pc105"
[ 62.788] (**) Option "xkb_layout" "us,ru"
[ 62.788] (**) Option "xkb_variant" ","
[ 62.788] (**) Option "xkb_options" "grp:shift_caps_switch,grp_led:scroll"
[ 62.792] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 62.792] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 62.792] (II) Using input driver 'evdev' for 'Power Button'
[ 62.792] (**) Power Button: always reports core events
[ 62.792] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 62.793] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 62.793] (--) evdev: Power Button: Found keys
[ 62.793] (II) evdev: Power Button: Configuring as keyboard
[ 62.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 62.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 62.793] (**) Option "xkb_rules" "evdev"
[ 62.793] (**) Option "xkb_model" "pc105"
[ 62.793] (**) Option "xkb_layout" "us,ru"
[ 62.793] (**) Option "xkb_variant" ","
[ 62.793] (**) Option "xkb_options" "grp:shift_caps_switch,grp_led:scroll"
[ 62.795] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 62.796] (II) No input driver specified, ignoring this device.
[ 62.796] (II) This device may have been added with another device file.
[ 62.797] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 62.797] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 62.797] (II) Using input driver 'evdev' for 'Sleep Button'
[ 62.797] (**) Sleep Button: always reports core events
[ 62.797] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 62.797] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 62.797] (--) evdev: Sleep Button: Found keys
[ 62.797] (II) evdev: Sleep Button: Configuring as keyboard
[ 62.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 62.797] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 62.798] (**) Option "xkb_rules" "evdev"
[ 62.798] (**) Option "xkb_model" "pc105"
[ 62.798] (**) Option "xkb_layout" "us,ru"
[ 62.798] (**) Option "xkb_variant" ","
[ 62.798] (**) Option "xkb_options" "grp:shift_caps_switch,grp_led:scroll"
[ 62.800] (II) config/udev: Adding input device HDA Intel Headphone Mic (/dev/input/event8)
[ 62.800] (II) No input driver specified, ignoring this device.
[ 62.800] (II) This device may have been added with another device file.
[ 62.801] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 62.801] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 62.801] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 62.801] (**) Eee PC WMI hotkeys: always reports core events
[ 62.801] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 62.801] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 62.801] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 62.801] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 62.801] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event7"
[ 62.801] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 10)
[ 62.801] (**) Option "xkb_rules" "evdev"
[ 62.802] (**) Option "xkb_model" "pc105"
[ 62.802] (**) Option "xkb_layout" "us,ru"
[ 62.802] (**) Option "xkb_variant" ","
[ 62.802] (**) Option "xkb_options" "grp:shift_caps_switch,grp_led:scroll"
[ 62.803] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 62.804] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 62.804] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 62.804] (**) AT Translated Set 2 keyboard: always reports core events
[ 62.804] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 62.804] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 62.804] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 62.804] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 62.804] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 62.804] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 62.804] (**) Option "xkb_rules" "evdev"
[ 62.804] (**) Option "xkb_model" "pc105"
[ 62.804] (**) Option "xkb_layout" "us,ru"
[ 62.804] (**) Option "xkb_variant" ","
[ 62.805] (**) Option "xkb_options" "grp:shift_caps_switch,grp_led:scroll"
[ 62.806] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 62.806] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 62.806] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 62.806] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 62.806] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad enable two-finger scroll"
[ 62.806] (II) LoadModule: "synaptics"
[ 62.807] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 62.843] (II) Module synaptics: vendor="X.Org Foundation"
[ 62.843] compiled for 1.16.0.901, module version = 1.8.99
[ 62.843] Module class: X.Org XInput Driver
[ 62.843] ABI class: X.Org XInput driver, version 21.0
[ 62.843] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 62.843] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 62.843] (**) Option "Device" "/dev/input/event9"
[ 62.880] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[ 62.880] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1216 (res 0)
[ 62.880] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 512 (res 0)
[ 62.880] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 62.880] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 62.880] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 62.880] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 62.880] (**) Option "HorizTwoFingerScroll" "1"
[ 62.880] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 62.880] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 62.927] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event9"
[ 62.927] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 62.927] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 62.927] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 62.927] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.152
[ 62.928] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 62.928] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 62.928] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 62.928] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 62.929] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 62.930] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 62.930] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 62.930] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 62.930] (II) No input driver specified, ignoring this device.
[ 62.930] (II) This device may have been added with another device file.
[ 86.769] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 86.769] (II) intel(0): Printing DDC gathered Modelines:
[ 86.769] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 86.808] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 86.808] (II) intel(0): Printing DDC gathered Modelines:
[ 86.808] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 87.033] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 87.033] (II) intel(0): Printing DDC gathered Modelines:
[ 87.033] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 87.092] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 87.092] (II) intel(0): Printing DDC gathered Modelines:
[ 87.092] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 87.132] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 87.132] (II) intel(0): Printing DDC gathered Modelines:
[ 87.132] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 705.421] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 705.436] (II) intel(0): Printing DDC gathered Modelines:
[ 705.436] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 947.848] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 947.866] (II) intel(0): Printing DDC gathered Modelines:
[ 947.866] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 4906.052] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 4906.174] (II) intel(0): Printing DDC gathered Modelines:
[ 4906.175] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 5739.751] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 5739.827] (II) intel(0): Printing DDC gathered Modelines:
[ 5739.827] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 6454.607] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption: Resource deadlock avoided.
(II) config/udev: Adding input device USB2.0 UVC VGA WebCam (/dev/input/event10)
[ 11174.629] (**) USB2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[ 11174.665] (II) Using input driver 'evdev' for 'USB2.0 UVC VGA WebCam'
[ 11174.665] (**) USB2.0 UVC VGA WebCam: always reports core events
[ 11174.665] (**) evdev: USB2.0 UVC VGA WebCam: Device: "/dev/input/event10"
[ 11174.665] (--) evdev: USB2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5702
[ 11174.666] (--) evdev: USB2.0 UVC VGA WebCam: Found keys
[ 11174.666] (II) evdev: USB2.0 UVC VGA WebCam: Configuring as keyboard
[ 11174.666] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11/event10"
[ 11174.666] (II) XINPUT: Adding extended input device "USB2.0 UVC VGA WebCam" (type: KEYBOARD, id 13)
[ 11174.666] (**) Option "xkb_rules" "evdev"
[ 11174.666] (**) Option "xkb_model" "pc105"
[ 11174.666] (**) Option "xkb_layout" "us,ru"
[ 11174.666] (**) Option "xkb_variant" ","
[ 11174.666] (**) Option "xkb_options" "grp:shift_caps_switch,grp_led:scroll"
[ 11186.747] (II) config/udev: removing device USB2.0 UVC VGA WebCam
[ 11186.765] (II) evdev: USB2.0 UVC VGA WebCam: Close
[ 11186.908] (II) UnloadModule: "evdev"
[ 11212.059] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 11212.158] (II) intel(0): Printing DDC gathered Modelines:
[ 11212.158] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 13320.361] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 13320.452] (II) intel(0): Printing DDC gathered Modelines:
[ 13320.452] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 14538.031] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 14538.031] (II) intel(0): Printing DDC gathered Modelines:
[ 14538.031] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 14690.118] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 14690.152] (II) intel(0): Printing DDC gathered Modelines:
[ 14690.152] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
Reply to: