[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#800931: xserver-xorg-video-intel: needs xorg-video-abi-18, but not available



Package: xserver-xorg-video-intel
Version: 2:2.99.917-2
Severity: important

Dear Maintainer,

I tried to update my jessie on stretch. But package couldn't be
installed in case of abi-mismatch.

# apt-get install xserver-xorg-video-intel
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 xserver-xorg-video-intel : Depends: xorg-video-abi-18
 E: Unable to correct problems, you have held broken packages.


# apt-get install xorg-video-abi-18
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package xorg-video-abi-18 is a virtual package provided by:
  xserver-xorg-core 2:1.16.4-1 [Not candidate version]

  E: Package 'xorg-video-abi-18' has no installation candidate

best regards

Jakob

-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Feb 28  2015 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2388040 Aug 11 10:53 /usr/bin/Xorg

Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b)

/etc/X11/xorg.conf does not exist.

/etc/X11/xorg.conf.d does not exist.

/etc/modprobe.d contains no KMS configuration files.

Kernel version (/proc/version):
-------------------------------
Linux version 4.1.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.6-1 (2015-08-23)

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root  5486 Oct  4 13:52 /var/log/Xorg.1.log
-rw-r--r-- 1 root root  5486 Oct  4 13:52 /var/log/Xorg.2.log
-rw-r--r-- 1 root root  5486 Oct  4 13:52 /var/log/Xorg.3.log
-rw-r--r-- 1 root root  5486 Oct  4 13:52 /var/log/Xorg.4.log
-rw-r--r-- 1 root root  5486 Oct  4 13:52 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 26186 Oct  5 09:10 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[    30.417] 
X.Org X Server 1.17.2
Release Date: 2015-06-16
[    30.417] X Protocol Version 11, Revision 0
[    30.418] Build Operating System: Linux 4.1.0 x86_64 Debian
[    30.418] Current Operating System: Linux aldebaran 4.1.0-2-amd64 #1 SMP Debian 4.1.6-1 (2015-08-23) x86_64
[    30.418] Kernel command line: BOOT_IMAGE=/@debian-testing/boot/vmlinuz-4.1.0-2-amd64 root=UUID=56682d9f-5078-472b-83a2-fde3fa43f0b5 ro rootflags=subvol=@debian-testing quiet splash acpi_osi=Linux acpi_backlight=vendor i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 ii915.fastboot=0 i915.enable_fbc=1
[    30.418] Build Date: 11 August 2015  10:51:15AM
[    30.418] xorg-server 2:1.17.2-1.1 (http://www.debian.org/support) 
[    30.418] Current version of pixman: 0.33.2
[    30.418] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    30.418] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.418] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct  5 09:04:49 2015
[    30.421] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.456] (==) No Layout section.  Using the first Screen section.
[    30.456] (==) No screen section available. Using defaults.
[    30.456] (**) |-->Screen "Default Screen Section" (0)
[    30.456] (**) |   |-->Monitor "<default monitor>"
[    30.456] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    30.456] (**) |   |-->Device "card0"
[    30.456] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    30.456] (==) Automatically adding devices
[    30.456] (==) Automatically enabling devices
[    30.456] (==) Automatically adding GPU devices
[    30.458] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts".
[    30.458] 	Entry deleted from font path.
[    30.458] 	(Run 'mkfontdir' on "/usr/share/fonts").
[    30.458] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype".
[    30.458] 	Entry deleted from font path.
[    30.458] 	(Run 'mkfontdir' on "/usr/share/fonts/truetype").
[    30.458] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype/ttf-bitstream-vera".
[    30.458] 	Entry deleted from font path.
[    30.458] 	(Run 'mkfontdir' on "/usr/share/fonts/truetype/ttf-bitstream-vera").
[    30.459] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype/msttcorefonts".
[    30.459] 	Entry deleted from font path.
[    30.459] 	(Run 'mkfontdir' on "/usr/share/fonts/truetype/msttcorefonts").
[    30.460] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/X11".
[    30.460] 	Entry deleted from font path.
[    30.460] 	(Run 'mkfontdir' on "/usr/share/fonts/X11").
[    30.461] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype/ttf-liberation".
[    30.461] 	Entry deleted from font path.
[    30.461] 	(Run 'mkfontdir' on "/usr/share/fonts/truetype/ttf-liberation").
[    30.461] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/type1".
[    30.461] 	Entry deleted from font path.
[    30.462] 	(Run 'mkfontdir' on "/usr/share/fonts/type1").
[    30.462] (WW) The directory "/usr/share/fonts/truetype/wqy" does not exist.
[    30.462] 	Entry deleted from font path.
[    30.462] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    30.462] 	Entry deleted from font path.
[    30.545] (**) FontPath set to:
	/usr/share/fonts/console,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/windows,
	/usr/share/fonts/console,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    30.545] (**) ModulePath set to "/usr/lib/xorg/modules"
[    30.545] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.545] (II) Loader magic: 0x56345fa2dd40
[    30.545] (II) Module ABI versions:
[    30.545] 	X.Org ANSI C Emulation: 0.4
[    30.545] 	X.Org Video Driver: 19.0
[    30.545] 	X.Org XInput driver : 21.0
[    30.545] 	X.Org Server Extension : 9.0
[    30.545] (II) xfree86: Adding drm device (/dev/dri/card0)
[    30.546] (--) PCI:*(0:0:2:0) 8086:0a16:103c:2248 rev 11, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00007000/64
[    30.546] (II) LoadModule: "glx"
[    30.547] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    30.585] (II) Module glx: vendor="X.Org Foundation"
[    30.586] 	compiled for 1.17.2, module version = 1.0.0
[    30.586] 	ABI class: X.Org Server Extension, version 9.0
[    30.586] (==) AIGLX enabled
[    30.586] (II) LoadModule: "intel"
[    30.636] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    30.784] (II) Module intel: vendor="X.Org Foundation"
[    30.784] 	compiled for 1.17.2, module version = 2.99.917
[    30.784] 	Module class: X.Org Video Driver
[    30.784] 	ABI class: X.Org Video Driver, version 19.0
[    30.784] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    30.784] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    30.784] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    30.784] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    30.784] (++) using VT number 7

[    30.784] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[    30.784] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2 (Vincent Cheng <vcheng@debian.org>)
[    30.784] (II) intel(0): SNA compiled for use with valgrind
[    30.785] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[    30.785] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[    30.785] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    30.785] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    30.785] (==) intel(0): RGB weight 888
[    30.785] (==) intel(0): Default visual is TrueColor
[    30.785] (**) intel(0): Option "NoAccel" "False"
[    30.785] (**) intel(0): Option "AccelMethod" "glamor"
[    30.785] (**) intel(0): Option "Backlight" "intel_backlight"
[    30.785] (**) intel(0): Option "DRI" "True"
[    30.785] (**) intel(0): Option "TearFree" "true"
[    30.785] (II) intel(0): Output eDP1 has no monitor section
[    30.785] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    30.785] (II) intel(0): Enabled output eDP1
[    30.785] (II) intel(0): Output HDMI1 has no monitor section
[    30.785] (II) intel(0): Enabled output HDMI1
[    30.785] (II) intel(0): Output DP1 has no monitor section
[    30.785] (II) intel(0): Enabled output DP1
[    30.785] (II) intel(0): Output HDMI2 has no monitor section
[    30.785] (II) intel(0): Enabled output HDMI2
[    30.785] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    30.786] (II) intel(0): Output VIRTUAL1 has no monitor section
[    30.786] (II) intel(0): Enabled output VIRTUAL1
[    30.786] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    30.786] (**) intel(0): TearFree enabled
[    30.786] (==) intel(0): DPI set to (96, 96)
[    30.786] (II) Loading sub module "dri2"
[    30.786] (II) LoadModule: "dri2"
[    30.786] (II) Module "dri2" already built-in
[    30.786] (II) Loading sub module "present"
[    30.786] (II) LoadModule: "present"
[    30.786] (II) Module "present" already built-in
[    30.786] (==) Depth 24 pixmap format is 32 bpp
[    30.786] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    30.786] (==) intel(0): Backing store enabled
[    30.787] (==) intel(0): Silken mouse enabled
[    30.787] (II) intel(0): HW Cursor enabled
[    30.787] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    30.787] (==) intel(0): DPMS enabled
[    30.787] (==) intel(0): display hotplug detection enabled
[    30.787] (II) intel(0): [DRI2] Setup complete
[    30.787] (II) intel(0): [DRI2]   DRI driver: i965
[    30.787] (II) intel(0): [DRI2]   VDPAU driver: i965
[    30.787] (II) intel(0): direct rendering: DRI2 enabled
[    30.787] (II) intel(0): hardware support for Present enabled
[    30.787] (--) RandR disabled
[    30.791] (II) SELinux: Disabled on system
[    31.243] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    31.243] (II) AIGLX: enabled GLX_ARB_create_context
[    31.243] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    31.243] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    31.243] (II) AIGLX: enabled GLX_INTEL_swap_event
[    31.243] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    31.243] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    31.243] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    31.243] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    31.243] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    31.243] (II) AIGLX: Loaded and initialized i965
[    31.243] (II) GLX: Initialized DRI2 GL provider for screen 0
[    31.246] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    31.268] (II) intel(0): Setting screen physical size to 508 x 285
[    32.604] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.604] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.604] (II) LoadModule: "evdev"
[    32.604] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.753] (II) Module evdev: vendor="X.Org Foundation"
[    32.753] 	compiled for 1.16.4, module version = 2.9.2
[    32.753] 	Module class: X.Org XInput Driver
[    32.753] 	ABI class: X.Org XInput driver, version 21.0
[    32.753] (II) Using input driver 'evdev' for 'Power Button'
[    32.753] (**) Power Button: always reports core events
[    32.753] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.753] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.753] (--) evdev: Power Button: Found keys
[    32.753] (II) evdev: Power Button: Configuring as keyboard
[    32.753] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[    32.753] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.753] (**) Option "xkb_rules" "evdev"
[    32.753] (**) Option "xkb_model" "pc105"
[    32.753] (**) Option "xkb_layout" "de"
[    33.280] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    33.280] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    33.280] (II) Using input driver 'evdev' for 'Video Bus'
[    33.280] (**) Video Bus: always reports core events
[    33.280] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    33.280] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    33.280] (--) evdev: Video Bus: Found keys
[    33.280] (II) evdev: Video Bus: Configuring as keyboard
[    33.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event4"
[    33.281] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    33.281] (**) Option "xkb_rules" "evdev"
[    33.281] (**) Option "xkb_model" "pc105"
[    33.281] (**) Option "xkb_layout" "de"
[    33.281] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    33.281] (II) No input driver specified, ignoring this device.
[    33.281] (II) This device may have been added with another device file.
[    33.282] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    33.282] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    33.282] (II) Using input driver 'evdev' for 'Sleep Button'
[    33.282] (**) Sleep Button: always reports core events
[    33.282] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    33.282] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    33.282] (--) evdev: Sleep Button: Found keys
[    33.282] (II) evdev: Sleep Button: Configuring as keyboard
[    33.282] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event1"
[    33.282] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    33.282] (**) Option "xkb_rules" "evdev"
[    33.282] (**) Option "xkb_model" "pc105"
[    33.282] (**) Option "xkb_layout" "de"
[    33.283] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[    33.283] (II) No input driver specified, ignoring this device.
[    33.283] (II) This device may have been added with another device file.
[    33.283] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event11)
[    33.283] (II) No input driver specified, ignoring this device.
[    33.283] (II) This device may have been added with another device file.
[    33.284] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event12)
[    33.284] (II) No input driver specified, ignoring this device.
[    33.284] (II) This device may have been added with another device file.
[    33.284] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[    33.284] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    33.284] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    33.284] (**) Logitech USB Receiver: always reports core events
[    33.284] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[    33.340] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    33.340] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    33.340] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    33.340] (--) evdev: Logitech USB Receiver: Found relative axes
[    33.340] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    33.340] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    33.340] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    33.340] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    33.340] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.340] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input9/event5"
[    33.340] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[    33.340] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    33.340] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    33.340] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    33.340] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    33.340] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    33.341] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    33.341] (II) No input driver specified, ignoring this device.
[    33.341] (II) This device may have been added with another device file.
[    33.342] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[    33.342] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    33.342] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    33.342] (**) Logitech USB Receiver: always reports core events
[    33.342] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[    33.342] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    33.342] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    33.342] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    33.342] (--) evdev: Logitech USB Receiver: Found relative axes
[    33.342] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    33.342] (--) evdev: Logitech USB Receiver: Found absolute axes
[    33.342] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    33.342] (--) evdev: Logitech USB Receiver: Found keys
[    33.342] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    33.342] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    33.342] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    33.342] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    33.342] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    33.342] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/input/input10/event6"
[    33.342] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[    33.342] (**) Option "xkb_rules" "evdev"
[    33.342] (**) Option "xkb_model" "pc105"
[    33.342] (**) Option "xkb_layout" "de"
[    33.342] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    33.342] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    33.343] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    33.343] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    33.343] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    33.343] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    33.343] (II) config/udev: Adding input device HP HD Webcam (/dev/input/event18)
[    33.343] (**) HP HD Webcam: Applying InputClass "evdev keyboard catchall"
[    33.343] (II) Using input driver 'evdev' for 'HP HD Webcam'
[    33.343] (**) HP HD Webcam: always reports core events
[    33.343] (**) evdev: HP HD Webcam: Device: "/dev/input/event18"
[    33.343] (--) evdev: HP HD Webcam: Vendor 0x5c8 Product 0x374
[    33.343] (--) evdev: HP HD Webcam: Found keys
[    33.343] (II) evdev: HP HD Webcam: Configuring as keyboard
[    33.343] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25/event18"
[    33.343] (II) XINPUT: Adding extended input device "HP HD Webcam" (type: KEYBOARD, id 11)
[    33.343] (**) Option "xkb_rules" "evdev"
[    33.343] (**) Option "xkb_model" "pc105"
[    33.343] (**) Option "xkb_layout" "de"
[    33.344] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[    33.344] (II) No input driver specified, ignoring this device.
[    33.344] (II) This device may have been added with another device file.
[    33.344] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[    33.344] (II) No input driver specified, ignoring this device.
[    33.344] (II) This device may have been added with another device file.
[    33.345] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[    33.345] (II) No input driver specified, ignoring this device.
[    33.345] (II) This device may have been added with another device file.
[    33.345] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    33.345] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    33.345] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    33.345] (**) AT Translated Set 2 keyboard: always reports core events
[    33.345] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    33.345] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    33.345] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    33.345] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    33.345] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    33.345] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    33.345] (**) Option "xkb_rules" "evdev"
[    33.345] (**) Option "xkb_model" "pc105"
[    33.345] (**) Option "xkb_layout" "de"
[    33.346] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[    33.346] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    33.346] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    33.346] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    33.346] (II) LoadModule: "synaptics"
[    33.346] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    33.349] (II) Module synaptics: vendor="X.Org Foundation"
[    33.349] 	compiled for 1.16.4, module version = 1.8.2
[    33.349] 	Module class: X.Org XInput Driver
[    33.349] 	ABI class: X.Org XInput driver, version 21.0
[    33.349] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    33.349] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    33.349] (**) Option "Device" "/dev/input/event13"
[    33.463] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    33.463] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1220 - 5716 (res 46)
[    33.463] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 986 - 4886 (res 80)
[    33.463] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    33.463] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    33.463] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    33.463] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    33.463] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    33.463] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    33.492] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input15/event13"
[    33.492] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    33.492] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    33.492] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    33.492] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[    33.492] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    33.492] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    33.492] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    33.492] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    33.492] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    33.492] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    33.492] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    33.493] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[    33.493] (II) No input driver specified, ignoring this device.
[    33.493] (II) This device may have been added with another device file.
[    33.493] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    33.493] (II) No input driver specified, ignoring this device.
[    33.493] (II) This device may have been added with another device file.
[    33.493] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    33.493] (II) No input driver specified, ignoring this device.
[    33.493] (II) This device may have been added with another device file.
[    33.494] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[    33.494] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    33.494] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[    33.494] (**) HP Wireless hotkeys: always reports core events
[    33.494] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event7"
[    33.494] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[    33.494] (--) evdev: HP Wireless hotkeys: Found keys
[    33.494] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[    33.494] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event7"
[    33.494] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 14)
[    33.494] (**) Option "xkb_rules" "evdev"
[    33.494] (**) Option "xkb_model" "pc105"
[    33.494] (**) Option "xkb_layout" "de"
[    33.494] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event17)
[    33.494] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    33.494] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    33.494] (**) HP WMI hotkeys: always reports core events
[    33.494] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event17"
[    33.494] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    33.494] (--) evdev: HP WMI hotkeys: Found keys
[    33.494] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    33.494] (**) Option "config_info" "udev:/sys/devices/virtual/input/input24/event17"
[    33.494] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[    33.494] (**) Option "xkb_rules" "evdev"
[    33.494] (**) Option "xkb_model" "pc105"
[    33.494] (**) Option "xkb_layout" "de"
[    41.273] (II) intel(0): EDID vendor "CMN", prod id 5570
[    41.273] (II) intel(0): Printing DDC gathered Modelines:
[    41.273] (II) intel(0): Modeline "1920x1080"x0.0  152.84  1920 2010 2070 2250  1080 1086 1095 1132 +hsync -vsync (67.9 kHz eP)
[    41.273] (II) intel(0): Modeline "1920x1080"x0.0  101.89  1920 2010 2070 2250  1080 1086 1095 1132 +hsync -vsync (45.3 kHz e)
[   390.716] (II) intel(0): switch to mode 1920x1080@59.9 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4463242

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=17037346
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4499566

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=17052585
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=4462505

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16808978

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4461940

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=16869428
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=17325067

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17368489

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=17340960

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17380426

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=17369040

P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17400446

P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input9
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input9
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=3000
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046DpC52Fe0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:14.0-3/input0"
E: PRODUCT=3/46d/c52f/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4948876

P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input9/event5
N: input/event5
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event-mouse
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input9/event5
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=3000
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17125337

P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input9/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C52F.0001/input/input9/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=3000
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=4949401

P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/input/input10
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/input/input10
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_1
E: ID_REVISION=3000
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 1 130f938b17c000 677bfad9415fed 9ed68000004400 10000002
E: MODALIAS=input:b0003v046DpC52Fe0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E7,E8,E9,EA,EB,F0,F1,F4,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,250,251,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:14.0-3/input1"
E: PRODUCT=3/46d/c52f/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=4949143

P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/input/input10/event6
N: input/event6
S: input/by-id/usb-Logitech_USB_Receiver-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.1-event /dev/input/by-id/usb-Logitech_USB_Receiver-event-if01
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C52F.0002/input/input10/event6
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_1
E: ID_REVISION=3000
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17109161
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_7_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_HD_Webcam
E: ID_MODEL_ENC=HP\x20HD\x20Webcam
E: ID_MODEL_ID=0374
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=0101
E: ID_SERIAL=SunplusIT_INC._HP_HD_Webcam
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_INC.
E: ID_VENDOR_ENC=SunplusIT\x20INC.
E: ID_VENDOR_ID=05c8
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v05C8p0374e0101-e0,1,kD4,ramlsfw
E: NAME="HP HD Webcam"
E: PHYS="usb-0000:00:14.0-7/button"
E: PRODUCT=3/5c8/374/101
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19396969

P: /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25/event18
N: input/event18
S: input/by-id/usb-SunplusIT_INC._HP_HD_Webcam-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-SunplusIT_INC._HP_HD_Webcam-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:7:1.0-event
E: DEVNAME=/dev/input/event18
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input25/event18
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_HD_Webcam
E: ID_MODEL_ENC=HP\x20HD\x20Webcam
E: ID_MODEL_ID=0374
E: ID_PATH=pci-0000:00:14.0-usb-0:7:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_7_1_0
E: ID_REVISION=0101
E: ID_SERIAL=SunplusIT_INC._HP_HD_Webcam
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_INC.
E: ID_VENDOR_ENC=SunplusIT\x20INC.
E: ID_VENDOR_ID=05c8
E: MAJOR=13
E: MINOR=82
E: SUBSYSTEM=input
E: USEC_INITIALIZED=19442215
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input21
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0282e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card1/codec#0/beep0"
E: PRODUCT=1/10ec/282/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=17475840

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input21/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input21/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17622868

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input22
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=17624256

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input22/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input22/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17728490

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input23
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=17682395

P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input23/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input23/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17766691

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=20000 20 0 0 1500f02100000 3803078f900d401 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D4,D9,E0,E1,E2,E3,EC,EE,F0,185,1D1,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4454916

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_81=fn_esc
E: KEYBOARD_KEY_89=battery
E: KEYBOARD_KEY_8a=screenlock
E: KEYBOARD_KEY_8b=camera
E: KEYBOARD_KEY_8c=media
E: KEYBOARD_KEY_8e=dvd
E: KEYBOARD_KEY_92=brightnessdown
E: KEYBOARD_KEY_97=brightnessup
E: KEYBOARD_KEY_b1=help
E: KEYBOARD_KEY_b3=unknown
E: KEYBOARD_KEY_d7=wlan
E: KEYBOARD_KEY_ee=switchvideomode
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17286230
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/platform/i8042/serio3/input/input15
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio3/input/input15
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-3
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-3
E: ID_PATH_TAG=platform-i8042-serio-3
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio3/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=17390329

P: /devices/platform/i8042/serio3/input/input15/event13
N: input/event13
S: input/by-path/platform-i8042-serio-3-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-3-event-mouse
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/platform/i8042/serio3/input/input15/event13
E: ID_INPUT=1
E: ID_INPUT_HEIGHT_MM=48
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_WIDTH_MM=97
E: ID_PATH=platform-i8042-serio-3
E: ID_PATH_TAG=platform-i8042-serio-3
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17424547

P: /devices/platform/i8042/serio3/input/input15/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-3-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-3-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio3/input/input15/mouse1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-3
E: ID_PATH_TAG=platform-i8042-serio-3
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17390800

P: /devices/platform/lis3lv02d/input/input12
E: ABS=7
E: DEVPATH=/devices/platform/lis3lv02d/input/input12
E: EV=9
E: ID_FOR_SEAT=input-platform-lis3lv02d
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MODALIAS=input:b0019v0000p0000e0000-e0,3,kra0,1,2,mlsfw
E: NAME="ST LIS3LV02DL Accelerometer"
E: PHYS="lis3lv02d/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=17150583

P: /devices/platform/lis3lv02d/input/input12/event8
N: input/event8
S: input/by-path/platform-lis3lv02d-event
E: DEVLINKS=/dev/input/by-path/platform-lis3lv02d-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/lis3lv02d/input/input12/event8
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=18396544

P: /devices/platform/lis3lv02d/input/input12/js0
N: input/js0
E: DEVNAME=/dev/input/js0
E: DEVPATH=/devices/platform/lis3lv02d/input/input12/js0
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: MAJOR=13
E: MINOR=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17389526

P: /devices/platform/pcspkr/input/input19
E: DEVPATH=/devices/platform/pcspkr/input/input19
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=17288363

P: /devices/platform/pcspkr/input/input19/event9
N: input/event9
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/platform/pcspkr/input/input19/event9
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17340445

P: /devices/virtual/input/input11
E: DEVPATH=/devices/virtual/input/input11
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=80000000000000 0 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,kF7,ramlsfw
E: NAME="HP Wireless hotkeys"
E: PHYS="hpq6001/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=17139949

P: /devices/virtual/input/input11/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/virtual/input/input11/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17170152
E: XKBLAYOUT=de
E: XKBMODEL=pc105

P: /devices/virtual/input/input24
E: DEVPATH=/devices/virtual/input/input24
E: EV=33
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=4000000000 0 1000700000000 2102400 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,8D,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5,
E: MSC=10
E: NAME="HP WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=22
E: TAGS=:seat:
E: USEC_INITIALIZED=17779328

P: /devices/virtual/input/input24/event17
N: input/event17
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/virtual/input/input24/event17
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=17900327
E: XKBLAYOUT=de
E: XKBMODEL=pc105


DRM Information from dmesg:
---------------------------
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    4.396090] Linux agpgart interface v0.103
[    4.460404] [drm] Initialized drm 1.1.0 20060810
[    4.484672] [drm] Memory usable by graphics device = 2048M
[    4.484678] fb: switching to inteldrmfb from simple
[    4.484787] [drm] Replacing VGA console driver
[    4.485675] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[    4.491802] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.491805] [drm] Driver supports precise vblank timestamp query.
[    4.516307] fbcon: inteldrmfb (fb0) is primary device
[    4.517135] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[    5.605257] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   18.438876]  ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_tcpudp xt_conntrack nf_conntrack iptable_filter ip_tables x_tables ppdev lp parport efivarfs autofs4 btrfs xor raid6_pq sr_mod sd_mod cdrom hid_generic usbhid hid rtsx_pci_sdmmc mmc_core crc32c_intel ahci libahci libata scsi_mod i915 ehci_pci rtsx_pci i2c_algo_bit xhci_pci ehci_hcd r8169 xhci_hcd drm_kms_helper mii mfd_core usbcore drm usb_common thermal wmi video thermal_sys button


-- System Information:
Debian Release: stretch/sid
  APT prefers stable-updates
  APT policy: (1001, 'stable-updates'), (1001, 'testing'), (990, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.1.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.utf8, LC_CTYPE=de_AT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages xserver-xorg-video-intel depends on:
ii  libc6                                  2.19-22
ii  libdrm-intel1                          2.4.64-1
ii  libdrm2                                2.4.64-1
ii  libpciaccess0                          0.13.4-1
ii  libpixman-1-0                          0.33.2-2
ii  libudev1                               226-3
ii  libx11-6                               2:1.6.3-1
ii  libx11-xcb1                            2:1.6.3-1
ii  libxcb-dri2-0                          1.10-3+b1
ii  libxcb-dri3-0                          1.10-3+b1
ii  libxcb-sync1                           1.10-3+b1
ii  libxcb-util0                           0.3.8-3
ii  libxcb1                                1.10-3+b1
ii  libxcursor1                            1:1.1.14-1+b1
ii  libxdamage1                            1:1.1.4-2+b1
ii  libxext6                               2:1.3.3-1
ii  libxfixes3                             1:5.0.1-2+b2
ii  libxinerama1                           2:1.1.3-1+b1
ii  libxrandr2                             2:1.5.0-1
ii  libxrender1                            1:0.9.8-1+b1
ii  libxshmfence1                          1.2-1
ii  libxtst6                               2:1.2.2-1+b1
ii  libxv1                                 2:1.0.10-1+b1
ii  libxvmc1                               2:1.0.9-1
ii  xserver-xorg-core [xorg-video-abi-19]  2:1.17.2-1.1

xserver-xorg-video-intel recommends no packages.

xserver-xorg-video-intel suggests no packages.

-- no debconf information


Reply to: