Bug#795544: xorg: open source video drivers flawed?
Package: xorg
Version: 1:7.7+9
Severity: grave
Justification: renders package unusable
It seems either development is stalled on open source drivers or we have an
upstream issue in the video department.
Fedora is working proof that open source drivers not only work, but compete
with closed sourced ones.They are pulling an upstream version of both nvidia
AND ATI to get things going. ON TOP of that, they have working OpenCL to go
alongside with the drivers.
So someone tell me where Debian is going wrong here and causing breakage and
failure to get 3D acceleration to work.The MYTH of no 3D acceleration with open
source drivers has no basis of fact anymore.
Im not understanding where the problem is when they are only using a more
upstream package version that what you are using.(As-is the case with a LOT of
fedora packages, they are very bleeding edge..) I think as of version 18 they
dropped closed source support and its more of a PITA to get these drivers
installed, its nearly impossible after 20.And really its pointless, the open
source drivers work like a charm.There is no need to install the non-free
ones.All "driver" issues were diagnosed to really being a LD_PRELOAD libc or
other error.
How come debian and other derivatives cant benefit from these CLEARLY working
3D accelerated drivers? You cant blame REDHAT here, the work on Fedora is done
as a "FREE" product.Everything is done under MIT license.Share alike.
You might need to "alien" some packages, but there should be no reason to see
if thier changes to these components cannot be applied here.
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2 to /usr/lib/mesa-diverted/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/libGLESv2.so to /usr/lib/mesa-diverted/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so.1.1.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so.1.1.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv2.so.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so to /usr/lib/mesa-diverted/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGLESv1_CM.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGLESv1_CM.so by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv1_CM.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv1_CM.so.1 by glx-diversions
diversion of /usr/lib/libGLESv2.so.2.0.0 to /usr/lib/mesa-diverted/libGLESv2.so.2.0.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGLESv2.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGLESv2.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850] [1002:6819]
08:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850] [1002:6819]
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 1297 Aug 10 14:19 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]-0"
Driver "fglrx"
BusID "PCI:8:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]-0"
Device "aticonfig-Device[1]-0"
Monitor "aticonfig-Monitor[1]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.0.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-2) ) #1 SMP Debian 4.0.8-2 (2015-07-22)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 76615 Aug 15 02:33 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 7.540]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 7.540] X Protocol Version 11, Revision 0
[ 7.540] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 7.540] Current Operating System: Linux livingroom 4.0.0-2-amd64 #1 SMP Debian 4.0.8-2 (2015-07-22) x86_64
[ 7.540] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-amd64 root=UUID=e26b0d1e-661c-4ee3-8e0b-e1bf691fe8df ro selinux=1 security=selinux quiet
[ 7.540] Build Date: 01 July 2015 05:17:14PM
[ 7.540] xorg-server 2:1.17.2-1 (http://www.debian.org/support)
[ 7.540] Current version of pixman: 0.32.6
[ 7.540] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.540] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.540] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 14 17:12:02 2015
[ 7.566] (==) Using config file: "/etc/X11/xorg.conf"
[ 7.566] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.572] (==) ServerLayout "aticonfig Layout"
[ 7.572] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 7.572] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 7.572] (**) | |-->Device "aticonfig-Device[0]-0"
[ 7.572] (**) |-->Screen "aticonfig-Screen[1]-0" (1)
[ 7.572] (**) | |-->Monitor "aticonfig-Monitor[1]-0"
[ 7.572] (**) | |-->Device "aticonfig-Device[1]-0"
[ 7.572] (==) Automatically adding devices
[ 7.572] (==) Automatically enabling devices
[ 7.572] (==) Automatically adding GPU devices
[ 7.582] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 7.582] Entry deleted from font path.
[ 7.651] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 7.651] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.651] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.652] (II) Loader magic: 0x7f13160e9d80
[ 7.652] (II) Module ABI versions:
[ 7.652] X.Org ANSI C Emulation: 0.4
[ 7.652] X.Org Video Driver: 19.0
[ 7.652] X.Org XInput driver : 21.0
[ 7.652] X.Org Server Extension : 9.0
[ 7.654] (--) PCI:*(0:1:0:0) 1002:6819:174b:a001 rev 0, Mem @ 0xd0000000/268435456, 0xfea00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 7.654] (--) PCI: (0:8:0:0) 1002:6819:174b:a001 rev 0, Mem @ 0xc0000000/268435456, 0xfe300000/262144, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 7.655] (II) "glx" will be loaded by default.
[ 7.655] (II) LoadModule: "glx"
[ 7.658] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 7.662] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 7.662] compiled for 6.9.0, module version = 1.0.0
[ 7.662] (II) LoadModule: "fglrx"
[ 7.663] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 7.762] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 7.762] compiled for 1.4.99.906, module version = 15.20.3
[ 7.762] Module class: X.Org Video Driver
[ 7.763] (II) Loading sub module "fglrxdrm"
[ 7.763] (II) LoadModule: "fglrxdrm"
[ 7.763] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 7.766] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 7.766] compiled for 1.4.99.906, module version = 15.20.3
[ 7.766] (II) AMD Proprietary Linux Driver Version Identifier:15.20.3
[ 7.766] (II) AMD Proprietary Linux Driver Release Identifier: 15.20.1046
[ 7.766] (II) AMD Proprietary Linux Driver Build Date: Jun 22 2015 21:28:37
[ 7.766] (++) using VT number 7
[ 7.771] (WW) Falling back to old probe method for fglrx
[ 7.785] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 7.787] ukiDynamicMajor: found major device number 247
[ 7.787] ukiDynamicMajor: found major device number 247
[ 7.787] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 7.787] ukiOpenDevice: node name is /dev/ati/card0
[ 7.787] ukiOpenDevice: open result is 9, (OK)
[ 8.247] ukiOpenByBusid: ukiOpenMinor returns 9
[ 8.247] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 8.248] ukiDynamicMajor: found major device number 247
[ 8.248] ukiDynamicMajor: found major device number 247
[ 8.248] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 8.248] ukiOpenDevice: node name is /dev/ati/card0
[ 8.248] ukiOpenDevice: open result is 9, (OK)
[ 8.248] ukiOpenByBusid: ukiOpenMinor returns 9
[ 8.248] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 8.248] ukiOpenDevice: node name is /dev/ati/card1
[ 8.499] ukiOpenDevice: open result is 9, (OK)
[ 8.500] ukiOpenByBusid: ukiOpenMinor returns 9
[ 8.500] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 8.509] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 8.509] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:5:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:6:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:7:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:11:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:13:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 8.511] (WW) fglrx: No matching Device section for instance (BusID PCI:0@8:0:1) found
[ 8.512] (II) fglrx(0): pEnt->device->identifier=0x7f1315fe2090
[ 8.512] (II) fglrx(1): pEnt->device->identifier=0x7f1315fe23b0
[ 8.512] (II) fglrx(0): === [xdl_xs117_atiddxPreInit] === begin
[ 8.512] (II) fglrx(0): FB driver is not enabled
[ 8.512] (II) Loading sub module "vgahw"
[ 8.512] (II) LoadModule: "vgahw"
[ 8.514] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 8.516] (II) Module vgahw: vendor="X.Org Foundation"
[ 8.516] compiled for 1.17.2, module version = 0.1.0
[ 8.516] ABI class: X.Org Video Driver, version 19.0
[ 8.517] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 8.517] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 8.517] (==) fglrx(0): Default visual is TrueColor
[ 8.517] (**) fglrx(0): Option "DPMS" "true"
[ 8.517] (==) fglrx(0): RGB weight 888
[ 8.517] (II) fglrx(0): Using 8 bits per RGB
[ 8.517] (==) fglrx(0): Buffer Tiling is ON
[ 8.517] (II) Loading sub module "fglrxdrm"
[ 8.517] (II) LoadModule: "fglrxdrm"
[ 8.517] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 8.517] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 8.517] compiled for 1.4.99.906, module version = 15.20.3
[ 8.518] ukiDynamicMajor: found major device number 247
[ 8.519] ukiDynamicMajor: found major device number 247
[ 8.519] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 8.519] ukiOpenDevice: node name is /dev/ati/card0
[ 8.519] ukiOpenDevice: open result is 11, (OK)
[ 8.519] ukiOpenByBusid: ukiOpenMinor returns 11
[ 8.519] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 8.519] (**) fglrx(0): NoAccel = NO
[ 8.519] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 8.519] (--) fglrx(0): Chipset: "AMD Radeon R7 200 Series " (Chipset = 0x6819)
[ 8.519] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xa001)
[ 8.519] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 8.519] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 8.519] (--) fglrx(0): MMIO registers at 0xfea00000
[ 8.519] (--) fglrx(0): I/O port at 0x0000e000
[ 8.519] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 8.520] (II) fglrx(0): AC Adapter is used
[ 8.522] (EE) fglrx(0): Cannot read int vect
[ 8.609] (II) Loading sub module "vbe"
[ 8.609] (II) LoadModule: "vbe"
[ 8.609] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 8.609] (II) Module vbe: vendor="X.Org Foundation"
[ 8.609] compiled for 1.17.2, module version = 1.1.0
[ 8.609] ABI class: X.Org Video Driver, version 19.0
[ 8.609] (II) Loading sub module "int10"
[ 8.609] (II) LoadModule: "int10"
[ 8.610] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 8.611] (II) Module int10: vendor="X.Org Foundation"
[ 8.611] compiled for 1.17.2, module version = 1.0.0
[ 8.611] ABI class: X.Org Video Driver, version 19.0
[ 8.611] (II) fglrx(0): initializing int10
[ 8.611] (EE) fglrx(0): Cannot read int vect
[ 8.611] (WW) fglrx(0): GetVBEMode failed
[ 8.611] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 8.611] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 8.611] (II) fglrx(0): PCIE card detected
[ 8.611] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 8.611] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 8.611] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 8.611] (II) fglrx(0): RandR 1.2 support is enabled!
[ 8.611] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 8.612] (II) Loading sub module "fb"
[ 8.612] (II) LoadModule: "fb"
[ 8.612] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.613] (II) Module fb: vendor="X.Org Foundation"
[ 8.613] compiled for 1.17.2, module version = 1.0.0
[ 8.613] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.613] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 8.613] (II) Loading sub module "ddc"
[ 8.613] (II) LoadModule: "ddc"
[ 8.613] (II) Module "ddc" already built-in
[ 8.799] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 8.799] (II) fglrx(0): Output DFP2 has no monitor section
[ 8.799] (II) fglrx(0): Output DFP3 has no monitor section
[ 8.799] (II) fglrx(0): Output DFP4 has no monitor section
[ 8.799] (II) fglrx(0): Output DFP5 has no monitor section
[ 8.799] (II) fglrx(0): Output DFP6 has no monitor section
[ 8.799] (II) fglrx(0): Output DFP7 has no monitor section
[ 8.799] (II) fglrx(0): Output CRT1 has no monitor section
[ 8.799] (II) Loading sub module "ddc"
[ 8.799] (II) LoadModule: "ddc"
[ 8.799] (II) Module "ddc" already built-in
[ 8.799] (II) fglrx(0): Connected Display0: CRT1
[ 8.799] (II) fglrx(0): Display0 EDID data ---------------------------
[ 8.799] (II) fglrx(0): Manufacturer: AOC Model: 1950 Serial#: 0
[ 8.799] (II) fglrx(0): Year: 2011 Week: 0
[ 8.799] (II) fglrx(0): EDID Version: 1.3
[ 8.799] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8.799] (II) fglrx(0): Sync: Separate
[ 8.799] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 8.799] (II) fglrx(0): Gamma: 2.20
[ 8.799] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 8.799] (II) fglrx(0): First detailed timing is preferred mode
[ 8.799] (II) fglrx(0): redX: 0.634 redY: 0.351 greenX: 0.334 greenY: 0.604
[ 8.799] (II) fglrx(0): blueX: 0.146 blueY: 0.059 whiteX: 0.312 whiteY: 0.328
[ 8.799] (II) fglrx(0): Supported established timings:
[ 8.799] (II) fglrx(0): 720x400@70Hz
[ 8.799] (II) fglrx(0): 640x480@60Hz
[ 8.799] (II) fglrx(0): 640x480@67Hz
[ 8.799] (II) fglrx(0): 640x480@72Hz
[ 8.799] (II) fglrx(0): 640x480@75Hz
[ 8.799] (II) fglrx(0): 800x600@56Hz
[ 8.799] (II) fglrx(0): 800x600@60Hz
[ 8.799] (II) fglrx(0): 800x600@72Hz
[ 8.799] (II) fglrx(0): 800x600@75Hz
[ 8.800] (II) fglrx(0): 832x624@75Hz
[ 8.800] (II) fglrx(0): 1024x768@60Hz
[ 8.800] (II) fglrx(0): 1024x768@70Hz
[ 8.800] (II) fglrx(0): 1024x768@75Hz
[ 8.800] (II) fglrx(0): Manufacturer's mask: 0
[ 8.800] (II) fglrx(0): Supported standard timings:
[ 8.800] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 8.800] (II) fglrx(0): #1: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 8.800] (II) fglrx(0): Supported detailed timing:
[ 8.800] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 8.800] (II) fglrx(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 8.800] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 8.800] (II) fglrx(0): Supported detailed timing:
[ 8.800] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 8.800] (II) fglrx(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 8.800] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 8.800] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 95 MHz
[ 8.800] (II) fglrx(0): Monitor name: 1950W
[ 8.800] (II) fglrx(0): EDID (in hex):
[ 8.800] (II) fglrx(0): 00ffffffffffff0005e3501900000000
[ 8.800] (II) fglrx(0): 00150103682917782a7b40a259559a25
[ 8.800] (II) fglrx(0): 0f5054bfee0081c0310a010101010101
[ 8.800] (II) fglrx(0): 010101010101662156aa51001e30468f
[ 8.800] (II) fglrx(0): 33009ae61000001e662150b051001b30
[ 8.800] (II) fglrx(0): 407036009ae61000001e000000fd0032
[ 8.800] (II) fglrx(0): 4c1e3c09000a202020202020000000fc
[ 8.800] (II) fglrx(0): 0031393530570a202020202020200059
[ 8.800] (II) fglrx(0): End of Display0 EDID data --------------------
[ 8.800] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 8.801] (II) fglrx(0): EDID for output DFP1
[ 8.801] (II) fglrx(0): EDID for output DFP2
[ 8.801] (II) fglrx(0): EDID for output DFP3
[ 8.801] (II) fglrx(0): EDID for output DFP4
[ 8.801] (II) fglrx(0): EDID for output DFP5
[ 8.801] (II) fglrx(0): EDID for output DFP6
[ 8.801] (II) fglrx(0): EDID for output DFP7
[ 8.801] (II) fglrx(0): EDID for output CRT1
[ 8.801] (II) fglrx(0): Manufacturer: AOC Model: 1950 Serial#: 0
[ 8.801] (II) fglrx(0): Year: 2011 Week: 0
[ 8.801] (II) fglrx(0): EDID Version: 1.3
[ 8.801] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8.801] (II) fglrx(0): Sync: Separate
[ 8.801] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 8.801] (II) fglrx(0): Gamma: 2.20
[ 8.801] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 8.801] (II) fglrx(0): First detailed timing is preferred mode
[ 8.801] (II) fglrx(0): redX: 0.634 redY: 0.351 greenX: 0.334 greenY: 0.604
[ 8.801] (II) fglrx(0): blueX: 0.146 blueY: 0.059 whiteX: 0.312 whiteY: 0.328
[ 8.801] (II) fglrx(0): Supported established timings:
[ 8.801] (II) fglrx(0): 720x400@70Hz
[ 8.801] (II) fglrx(0): 640x480@60Hz
[ 8.801] (II) fglrx(0): 640x480@67Hz
[ 8.801] (II) fglrx(0): 640x480@72Hz
[ 8.801] (II) fglrx(0): 640x480@75Hz
[ 8.801] (II) fglrx(0): 800x600@56Hz
[ 8.801] (II) fglrx(0): 800x600@60Hz
[ 8.801] (II) fglrx(0): 800x600@72Hz
[ 8.801] (II) fglrx(0): 800x600@75Hz
[ 8.801] (II) fglrx(0): 832x624@75Hz
[ 8.801] (II) fglrx(0): 1024x768@60Hz
[ 8.801] (II) fglrx(0): 1024x768@70Hz
[ 8.801] (II) fglrx(0): 1024x768@75Hz
[ 8.801] (II) fglrx(0): Manufacturer's mask: 0
[ 8.801] (II) fglrx(0): Supported standard timings:
[ 8.801] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 8.801] (II) fglrx(0): #1: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 8.801] (II) fglrx(0): Supported detailed timing:
[ 8.801] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 8.801] (II) fglrx(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 8.801] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 8.801] (II) fglrx(0): Supported detailed timing:
[ 8.801] (II) fglrx(0): clock: 85.5 MHz Image Size: 410 x 230 mm
[ 8.801] (II) fglrx(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 8.801] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 8.801] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 95 MHz
[ 8.801] (II) fglrx(0): Monitor name: 1950W
[ 8.801] (II) fglrx(0): EDID (in hex):
[ 8.801] (II) fglrx(0): 00ffffffffffff0005e3501900000000
[ 8.801] (II) fglrx(0): 00150103682917782a7b40a259559a25
[ 8.801] (II) fglrx(0): 0f5054bfee0081c0310a010101010101
[ 8.801] (II) fglrx(0): 010101010101662156aa51001e30468f
[ 8.801] (II) fglrx(0): 33009ae61000001e662150b051001b30
[ 8.801] (II) fglrx(0): 407036009ae61000001e000000fd0032
[ 8.801] (II) fglrx(0): 4c1e3c09000a202020202020000000fc
[ 8.801] (II) fglrx(0): 0031393530570a202020202020200059
[ 8.803] (II) fglrx(0): Printing probed modes for output CRT1
[ 8.803] (II) fglrx(0): Modeline "1366x768"x60.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 8.803] (II) fglrx(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 8.803] (II) fglrx(0): Modeline "1280x768"x60.0 85.50 1280 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 8.803] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 8.803] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8.803] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8.803] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.803] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.803] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.803] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.803] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.803] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 8.803] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.803] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 8.803] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.803] (II) fglrx(0): Output DFP1 disconnected
[ 8.803] (II) fglrx(0): Output DFP2 disconnected
[ 8.803] (II) fglrx(0): Output DFP3 disconnected
[ 8.803] (II) fglrx(0): Output DFP4 disconnected
[ 8.803] (II) fglrx(0): Output DFP5 disconnected
[ 8.803] (II) fglrx(0): Output DFP6 disconnected
[ 8.803] (II) fglrx(0): Output DFP7 disconnected
[ 8.803] (II) fglrx(0): Output CRT1 connected
[ 8.803] (II) fglrx(0): Using exact sizes for initial modes
[ 8.803] (II) fglrx(0): Output CRT1 using initial mode 1366x768
[ 8.803] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 8.803] (II) fglrx(0): DPI set to (96, 96)
[ 8.803] (II) fglrx(0): Eyefinity capable adapter detected.
[ 8.803] (II) fglrx(0): Adapter AMD Radeon R7 200 Series has 6 configurable heads and 1 displays connected.
[ 8.803] (==) fglrx(0): PseudoColor visuals disabled
[ 8.803] (II) Loading sub module "ramdac"
[ 8.803] (II) LoadModule: "ramdac"
[ 8.803] (II) Module "ramdac" already built-in
[ 8.803] (==) fglrx(0): NoDRI = NO
[ 8.803] (==) fglrx(0): Capabilities: 0x00000000
[ 8.803] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 8.803] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 8.803] (==) fglrx(0): UseFastTLS=0
[ 8.803] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 8.803] (II) fglrx(1): === [xdl_xs117_atiddxPreInit] === begin
[ 8.803] (II) fglrx(1): FB driver is not enabled
[ 8.803] (**) fglrx(1): Depth 24, (--) framebuffer bpp 32
[ 8.803] (II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 8.803] (==) fglrx(1): Default visual is TrueColor
[ 8.803] (**) fglrx(1): Option "DPMS" "true"
[ 8.804] (==) fglrx(1): RGB weight 888
[ 8.804] (II) fglrx(1): Using 8 bits per RGB
[ 8.804] (==) fglrx(1): Buffer Tiling is ON
[ 8.804] (II) Loading sub module "fglrxdrm"
[ 8.804] (II) LoadModule: "fglrxdrm"
[ 8.804] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 8.804] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 8.804] compiled for 1.4.99.906, module version = 15.20.3
[ 8.805] ukiDynamicMajor: found major device number 247
[ 8.805] ukiDynamicMajor: found major device number 247
[ 8.805] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 8.805] ukiOpenDevice: node name is /dev/ati/card0
[ 8.805] ukiOpenDevice: open result is 12, (OK)
[ 8.805] ukiOpenByBusid: ukiOpenMinor returns 12
[ 8.805] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 8.805] ukiOpenDevice: node name is /dev/ati/card1
[ 8.805] ukiOpenDevice: open result is 12, (OK)
[ 8.805] ukiOpenByBusid: ukiOpenMinor returns 12
[ 8.805] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 8.805] (WW) fglrx(1): Unable to register ADL handler for 0x00C00000
[ 8.806] (**) fglrx(1): NoAccel = NO
[ 8.806] (**) fglrx(1): AMD 2D Acceleration Architecture enabled
[ 8.806] (--) fglrx(1): Chipset: "AMD Radeon R7 200 Series " (Chipset = 0x6819)
[ 8.806] (--) fglrx(1): (PciSubVendor = 0x174b, PciSubDevice = 0xa001)
[ 8.806] (==) fglrx(1): board vendor info: third party graphics adapter - NOT original AMD
[ 8.806] (--) fglrx(1): Linear framebuffer (phys) at 0xc0000000
[ 8.806] (--) fglrx(1): MMIO registers at 0xfe300000
[ 8.806] (--) fglrx(1): I/O port at 0x0000a000
[ 8.806] (==) fglrx(1): ROM-BIOS at 0x000c0000
[ 8.806] (II) fglrx(0): AC Adapter is used
[ 8.806] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 8.806] (--) fglrx(1): Video RAM: 2097152 kByte, Type: GDDR5
[ 8.806] (II) fglrx(1): PCIE card detected
[ 8.806] (--) fglrx(1): Using per-process page tables (PPPT) as GART.
[ 8.806] (WW) fglrx(1): board is an unknown third party board, chipset is supported
[ 8.806] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 8.806] (II) fglrx(1): RandR 1.2 support is enabled!
[ 8.806] (II) fglrx(1): RandR 1.2 rotation support is enabled!
[ 8.806] (II) Loading sub module "fb"
[ 8.806] (II) LoadModule: "fb"
[ 8.806] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.806] (II) Module fb: vendor="X.Org Foundation"
[ 8.806] compiled for 1.17.2, module version = 1.0.0
[ 8.806] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.806] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 8.806] (II) Loading sub module "ddc"
[ 8.806] (II) LoadModule: "ddc"
[ 8.806] (II) Module "ddc" already built-in
[ 8.856] (II) fglrx(1): Output DFP1 using monitor section aticonfig-Monitor[1]-0
[ 8.856] (II) fglrx(1): Output DFP2 has no monitor section
[ 8.856] (II) fglrx(1): Output DFP3 has no monitor section
[ 8.856] (II) fglrx(1): Output DFP4 has no monitor section
[ 8.856] (II) fglrx(1): Output DFP5 has no monitor section
[ 8.856] (II) fglrx(1): Output DFP6 has no monitor section
[ 8.856] (II) fglrx(1): Output DFP7 has no monitor section
[ 8.856] (II) fglrx(1): Output CRT1 has no monitor section
[ 8.856] (II) Loading sub module "ddc"
[ 8.856] (II) LoadModule: "ddc"
[ 8.856] (II) Module "ddc" already built-in
[ 8.856] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 8.856] (II) fglrx(1): EDID for output DFP1
[ 8.856] (II) fglrx(1): EDID for output DFP2
[ 8.856] (II) fglrx(1): EDID for output DFP3
[ 8.856] (II) fglrx(1): EDID for output DFP4
[ 8.857] (II) fglrx(1): EDID for output DFP5
[ 8.857] (II) fglrx(1): EDID for output DFP6
[ 8.857] (II) fglrx(1): EDID for output DFP7
[ 8.857] (II) fglrx(1): Printing probed modes for output CRT1
[ 8.857] (II) fglrx(1): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP)
[ 8.857] (II) fglrx(1): Modeline "1400x1050"x60.0 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync (65.2 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1366x768"x60.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.857] (II) fglrx(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.857] (II) fglrx(1): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.857] (II) fglrx(1): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 8.857] (II) fglrx(1): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.857] (II) fglrx(1): Output DFP1 disconnected
[ 8.857] (II) fglrx(1): Output DFP2 disconnected
[ 8.857] (II) fglrx(1): Output DFP3 disconnected
[ 8.857] (II) fglrx(1): Output DFP4 disconnected
[ 8.857] (II) fglrx(1): Output DFP5 disconnected
[ 8.857] (II) fglrx(1): Output DFP6 disconnected
[ 8.857] (II) fglrx(1): Output DFP7 disconnected
[ 8.857] (II) fglrx(1): Output CRT1 connected
[ 8.857] (II) fglrx(1): Using exact sizes for initial modes
[ 8.857] (II) fglrx(1): Output CRT1 using initial mode 1600x1200
[ 8.857] (II) fglrx(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 8.857] (II) fglrx(1): DPI set to (96, 96)
[ 8.857] (WW) fglrx(0): Unable to register ADL handler for 0x00110000
[ 8.857] (WW) fglrx(0): Unable to register ADL handler for 0x00120000
[ 8.857] (WW) fglrx(0): Unable to register ADL handler for 0x00130000
[ 8.857] (WW) fglrx(0): Unable to register ADL handler for 0x00150000
[ 8.857] (II) fglrx(1): Eyefinity capable adapter detected.
[ 8.857] (II) fglrx(1): Adapter AMD Radeon R7 200 Series has 6 configurable heads and 0 displays connected.
[ 8.857] (==) fglrx(1): PseudoColor visuals disabled
[ 8.857] (II) Loading sub module "ramdac"
[ 8.857] (II) LoadModule: "ramdac"
[ 8.857] (II) Module "ramdac" already built-in
[ 8.857] (==) fglrx(1): NoDRI = NO
[ 8.857] (==) fglrx(1): Capabilities: 0x00000000
[ 8.857] (==) fglrx(1): CapabilitiesEx: 0x00000000
[ 8.857] (==) fglrx(1): OpenGL ClientDriverName: "fglrx_dri.so"
[ 8.857] (==) fglrx(1): UseFastTLS=0
[ 8.857] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 8.857] (--) Depth 24 pixmap format is 32 bpp
[ 8.857] (II) fglrx(0): doing swlDriScreenInit
[ 8.857] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 8.857] ukiDynamicMajor: found major device number 247
[ 8.857] ukiDynamicMajor: found major device number 247
[ 8.857] ukiDynamicMajor: found major device number 247
[ 8.857] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 8.857] ukiOpenDevice: node name is /dev/ati/card0
[ 8.857] ukiOpenDevice: open result is 13, (OK)
[ 8.857] ukiOpenByBusid: ukiOpenMinor returns 13
[ 8.857] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 8.857] (II) fglrx(0): [uki] DRM interface version 1.0
[ 8.857] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 8.857] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 8.857] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f13160e2000
[ 8.857] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 8.857] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 8.857] (II) fglrx(0): swlDriScreenInit done
[ 8.857] (II) fglrx(0): Kernel Module Version Information:
[ 8.857] (II) fglrx(0): Name: fglrx
[ 8.858] (II) fglrx(0): Version: 15.20.3
[ 8.858] (II) fglrx(0): Date: Jun 22 2015
[ 8.858] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 8.858] (II) fglrx(0): Kernel Module version matches driver.
[ 8.858] (II) fglrx(0): Kernel Module Build Time Information:
[ 8.858] (II) fglrx(0): Build-Kernel UTS_RELEASE: 4.0.0-2-amd64
[ 8.858] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 8.858] (II) fglrx(0): Build-Kernel __SMP__: no
[ 8.858] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 8.858] (II) fglrx(0): [uki] register handle = 0x00004000
[ 8.861] (II) fglrx(0): DRI initialization successfull
[ 8.862] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01080000
[ 8.863] (==) fglrx(0): Backing store enabled
[ 8.863] (**) fglrx(0): DPMS enabled
[ 8.864] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 8.864] (**) fglrx(0): Textured Video is enabled.
[ 8.864] (II) LoadModule: "glesx"
[ 8.864] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 8.884] (II) Module glesx: vendor="X.Org Foundation"
[ 8.884] compiled for 1.4.99.906, module version = 1.0.0
[ 8.884] (II) fglrx(0): GLESX enableFlags = 8784
[ 8.885] (II) fglrx(0): GLESX is enabled
[ 8.885] (II) LoadModule: "amdxmm"
[ 8.885] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 8.888] (II) Module amdxmm: vendor="X.Org Foundation"
[ 8.888] compiled for 1.4.99.906, module version = 2.0.0
[ 8.900] (II) fglrx(0): Enable composite support successfully
[ 8.900] (WW) fglrx(0): Option "VendorName" is not used
[ 8.900] (WW) fglrx(0): Option "ModelName" is not used
[ 8.900] (II) fglrx(0): X context handle = 0x1
[ 8.900] (II) fglrx(0): [DRI] installation complete
[ 8.900] (==) fglrx(0): Silken mouse enabled
[ 8.901] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 8.901] (II) fglrx(0): LPT is disabled by configure option
[ 8.901] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.016] (--) RandR disabled
[ 9.016] (II) fglrx(1): doing swlDriScreenInit
[ 9.016] (II) fglrx(1): swlDriScreenInit for fglrx driver
[ 9.016] ukiDynamicMajor: found major device number 247
[ 9.016] ukiDynamicMajor: found major device number 247
[ 9.016] ukiDynamicMajor: found major device number 247
[ 9.016] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 9.016] ukiOpenDevice: node name is /dev/ati/card0
[ 9.016] ukiOpenDevice: open result is 14, (OK)
[ 9.016] ukiOpenByBusid: ukiOpenMinor returns 14
[ 9.016] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.016] ukiOpenDevice: node name is /dev/ati/card1
[ 9.016] ukiOpenDevice: open result is 14, (OK)
[ 9.016] ukiOpenByBusid: ukiOpenMinor returns 14
[ 9.016] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 9.016] (II) fglrx(1): [uki] DRM interface version 1.0
[ 9.016] (II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:8:0:0"
[ 9.016] (II) fglrx(1): [uki] added 8192 byte SAREA at 0x18000
[ 9.016] (II) fglrx(1): [uki] mapped SAREA 0x18000 to 0x7f130d420000
[ 9.016] (II) fglrx(1): [uki] framebuffer handle = 0x19000
[ 9.016] (II) fglrx(1): [uki] added 1 reserved context for kernel
[ 9.016] (II) fglrx(1): swlDriScreenInit done
[ 9.016] (II) fglrx(1): Kernel Module Version Information:
[ 9.016] (II) fglrx(1): Name: fglrx
[ 9.016] (II) fglrx(1): Version: 15.20.3
[ 9.016] (II) fglrx(1): Date: Jun 22 2015
[ 9.016] (II) fglrx(1): Desc: AMD FireGL DRM kernel module
[ 9.016] (II) fglrx(1): Kernel Module version matches driver.
[ 9.016] (II) fglrx(1): Kernel Module Build Time Information:
[ 9.016] (II) fglrx(1): Build-Kernel UTS_RELEASE: 4.0.0-2-amd64
[ 9.016] (II) fglrx(1): Build-Kernel MODVERSIONS: no
[ 9.016] (II) fglrx(1): Build-Kernel __SMP__: no
[ 9.016] (II) fglrx(1): Build-Kernel PAGE_SIZE: 0x1000
[ 9.016] (II) fglrx(1): [uki] register handle = 0x0001a000
[ 9.016] (II) fglrx(1): Display width adjusted to to 1664 due to alignment constraints
[ 9.016] (II) fglrx(1): DRI initialization successfull
[ 9.016] (II) fglrx(1): FBADPhys: 0xf400000000 FBMappedSize: 0x01110000
[ 9.016] (==) fglrx(1): Backing store enabled
[ 9.016] (**) fglrx(1): DPMS enabled
[ 9.016] (**) fglrx(1): Textured Video is enabled.
[ 9.016] (II) fglrx(1): GLESX enableFlags = 8784
[ 9.016] (II) fglrx(1): GLESX is enabled
[ 9.028] (II) fglrx(1): Enable composite support successfully
[ 9.028] (WW) fglrx(1): Option "VendorName" is not used
[ 9.028] (WW) fglrx(1): Option "ModelName" is not used
[ 9.028] (II) fglrx(1): X context handle = 0x1
[ 9.028] (II) fglrx(1): [DRI] installation complete
[ 9.028] (==) fglrx(1): Silken mouse enabled
[ 9.028] (==) fglrx(1): Using HW cursor of display infrastructure!
[ 9.028] (II) fglrx(1): LPT is disabled by configure option
[ 9.028] (II) fglrx(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.240] (--) RandR disabled
[ 9.268] (II) SELinux: Disabled on system
[ 9.270] ukiDynamicMajor: found major device number 247
[ 9.270] ukiDynamicMajor: found major device number 247
[ 9.270] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 9.270] ukiOpenDevice: node name is /dev/ati/card0
[ 9.270] ukiOpenDevice: open result is 15, (OK)
[ 9.270] ukiOpenByBusid: ukiOpenMinor returns 15
[ 9.270] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 9.270] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 9.270] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 9.270] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 10.383] ukiDynamicMajor: found major device number 247
[ 10.384] ukiDynamicMajor: found major device number 247
[ 10.384] ukiDynamicMajor: found major device number 247
[ 10.384] ukiOpenDevice: node name is /dev/ati/card0
[ 10.384] ukiOpenDevice: open result is 16, (OK)
[ 10.384] ukiGetBusid returned 'PCI:1:0:0'
[ 10.384] ukiOpenDevice: node name is /dev/ati/card1
[ 10.384] ukiOpenDevice: open result is 16, (OK)
[ 10.384] ukiGetBusid returned 'PCI:8:0:0'
[ 10.384] ukiOpenDevice: node name is /dev/ati/card2
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card3
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card4
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card5
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card6
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card7
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card8
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card9
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card10
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card11
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card12
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card13
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card14
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiOpenDevice: node name is /dev/ati/card15
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: open result is -1, (No such device)
[ 10.384] ukiOpenDevice: Open failed
[ 10.384] ukiDynamicMajor: found major device number 247
[ 10.384] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 10.384] ukiOpenDevice: node name is /dev/ati/card0
[ 10.384] ukiOpenDevice: open result is 16, (OK)
[ 10.384] ukiOpenByBusid: ukiOpenMinor returns 16
[ 10.384] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.752] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 10.752] ukiDynamicMajor: found major device number 247
[ 10.752] ukiDynamicMajor: found major device number 247
[ 10.752] ukiOpenByBusid: Searching for BusID PCI:8:0:0
[ 10.752] ukiOpenDevice: node name is /dev/ati/card0
[ 10.752] ukiOpenDevice: open result is 17, (OK)
[ 10.752] ukiOpenByBusid: ukiOpenMinor returns 17
[ 10.752] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.752] ukiOpenDevice: node name is /dev/ati/card1
[ 10.752] ukiOpenDevice: open result is 17, (OK)
[ 10.752] ukiOpenByBusid: ukiOpenMinor returns 17
[ 10.752] ukiOpenByBusid: ukiGetBusid reports PCI:8:0:0
[ 10.759] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 1
[ 10.760] ukiDynamicMajor: found major device number 247
[ 10.760] ukiDynamicMajor: found major device number 247
[ 10.760] ukiDynamicMajor: found major device number 247
[ 10.760] ukiOpenDevice: node name is /dev/ati/card0
[ 10.760] ukiOpenDevice: open result is 18, (OK)
[ 10.760] ukiGetBusid returned 'PCI:1:0:0'
[ 10.760] ukiOpenDevice: node name is /dev/ati/card1
[ 10.760] ukiOpenDevice: open result is 18, (OK)
[ 10.760] ukiGetBusid returned 'PCI:8:0:0'
[ 10.760] ukiOpenDevice: node name is /dev/ati/card2
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card3
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card4
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card5
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card6
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card7
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card8
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card9
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card10
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card11
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card12
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card13
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card14
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiOpenDevice: node name is /dev/ati/card15
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: open result is -1, (No such device)
[ 10.760] ukiOpenDevice: Open failed
[ 10.760] ukiDynamicMajor: found major device number 247
[ 10.761] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 10.761] ukiOpenDevice: node name is /dev/ati/card0
[ 10.761] ukiOpenDevice: open result is 18, (OK)
[ 10.761] ukiOpenByBusid: ukiOpenMinor returns 18
[ 10.761] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.809] (II) fglrx(0): OverDrive5 Detected!
[ 10.811] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 10.811] (II) fglrx(0): OverDrive5 Detected!
[ 10.815] (II) fglrx(1): Setting screen physical size to 423 x 317
[ 10.893] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 10.893] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.893] (II) LoadModule: "evdev"
[ 10.893] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.903] (II) Module evdev: vendor="X.Org Foundation"
[ 10.903] compiled for 1.16.4, module version = 2.9.2
[ 10.903] Module class: X.Org XInput Driver
[ 10.903] ABI class: X.Org XInput driver, version 21.0
[ 10.903] (II) Using input driver 'evdev' for 'Power Button'
[ 10.903] (**) Power Button: always reports core events
[ 10.903] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 10.903] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.903] (--) evdev: Power Button: Found keys
[ 10.903] (II) evdev: Power Button: Configuring as keyboard
[ 10.903] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[ 10.903] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.903] (**) Option "xkb_rules" "evdev"
[ 10.903] (**) Option "xkb_model" "pc105"
[ 10.903] (**) Option "xkb_layout" "us"
[ 10.903] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.903] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.903] (II) Using input driver 'evdev' for 'Power Button'
[ 10.903] (**) Power Button: always reports core events
[ 10.903] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.903] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.903] (--) evdev: Power Button: Found keys
[ 10.903] (II) evdev: Power Button: Configuring as keyboard
[ 10.903] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[ 10.903] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.903] (**) Option "xkb_rules" "evdev"
[ 10.903] (**) Option "xkb_model" "pc105"
[ 10.903] (**) Option "xkb_layout" "us"
[ 10.904] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 10.904] (II) No input driver specified, ignoring this device.
[ 10.904] (II) This device may have been added with another device file.
[ 10.904] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event11)
[ 10.904] (II) No input driver specified, ignoring this device.
[ 10.904] (II) This device may have been added with another device file.
[ 10.905] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event12)
[ 10.905] (II) No input driver specified, ignoring this device.
[ 10.905] (II) This device may have been added with another device file.
[ 10.905] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event13)
[ 10.905] (II) No input driver specified, ignoring this device.
[ 10.905] (II) This device may have been added with another device file.
[ 10.905] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event14)
[ 10.905] (II) No input driver specified, ignoring this device.
[ 10.905] (II) This device may have been added with another device file.
[ 10.906] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event15)
[ 10.906] (II) No input driver specified, ignoring this device.
[ 10.906] (II) This device may have been added with another device file.
[ 10.906] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event8)
[ 10.906] (II) No input driver specified, ignoring this device.
[ 10.906] (II) This device may have been added with another device file.
[ 10.906] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event9)
[ 10.906] (II) No input driver specified, ignoring this device.
[ 10.906] (II) This device may have been added with another device file.
[ 10.906] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event4)
[ 10.906] (II) No input driver specified, ignoring this device.
[ 10.906] (II) This device may have been added with another device file.
[ 10.907] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event5)
[ 10.907] (II) No input driver specified, ignoring this device.
[ 10.907] (II) This device may have been added with another device file.
[ 10.907] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event6)
[ 10.907] (II) No input driver specified, ignoring this device.
[ 10.907] (II) This device may have been added with another device file.
[ 10.907] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event7)
[ 10.907] (II) No input driver specified, ignoring this device.
[ 10.907] (II) This device may have been added with another device file.
[ 10.908] (II) config/udev: Adding input device Webcam C110 (/dev/input/event27)
[ 10.908] (**) Webcam C110: Applying InputClass "evdev keyboard catchall"
[ 10.908] (II) Using input driver 'evdev' for 'Webcam C110'
[ 10.908] (**) Webcam C110: always reports core events
[ 10.908] (**) evdev: Webcam C110: Device: "/dev/input/event27"
[ 10.908] (--) evdev: Webcam C110: Vendor 0x46d Product 0x829
[ 10.908] (--) evdev: Webcam C110: Found keys
[ 10.908] (II) evdev: Webcam C110: Configuring as keyboard
[ 10.908] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb7/7-1/7-1:1.0/input/input30/event27"
[ 10.908] (II) XINPUT: Adding extended input device "Webcam C110" (type: KEYBOARD, id 8)
[ 10.908] (**) Option "xkb_rules" "evdev"
[ 10.908] (**) Option "xkb_model" "pc105"
[ 10.908] (**) Option "xkb_layout" "us"
[ 10.908] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event17)
[ 10.908] (II) No input driver specified, ignoring this device.
[ 10.908] (II) This device may have been added with another device file.
[ 10.909] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event18)
[ 10.909] (II) No input driver specified, ignoring this device.
[ 10.909] (II) This device may have been added with another device file.
[ 10.909] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event19)
[ 10.909] (II) No input driver specified, ignoring this device.
[ 10.909] (II) This device may have been added with another device file.
[ 10.909] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event20)
[ 10.909] (II) No input driver specified, ignoring this device.
[ 10.909] (II) This device may have been added with another device file.
[ 10.910] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event21)
[ 10.910] (II) No input driver specified, ignoring this device.
[ 10.910] (II) This device may have been added with another device file.
[ 10.910] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event22)
[ 10.910] (II) No input driver specified, ignoring this device.
[ 10.910] (II) This device may have been added with another device file.
[ 10.910] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event23)
[ 10.910] (II) No input driver specified, ignoring this device.
[ 10.910] (II) This device may have been added with another device file.
[ 10.911] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event24)
[ 10.911] (II) No input driver specified, ignoring this device.
[ 10.911] (II) This device may have been added with another device file.
[ 10.911] (II) config/udev: Adding input device Logitech M705 (/dev/input/event1)
[ 10.911] (**) Logitech M705: Applying InputClass "evdev pointer catchall"
[ 10.911] (II) Using input driver 'evdev' for 'Logitech M705'
[ 10.911] (**) Logitech M705: always reports core events
[ 10.911] (**) evdev: Logitech M705: Device: "/dev/input/event1"
[ 10.911] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b
[ 10.911] (--) evdev: Logitech M705: Found 20 mouse buttons
[ 10.911] (--) evdev: Logitech M705: Found scroll wheel(s)
[ 10.911] (--) evdev: Logitech M705: Found relative axes
[ 10.911] (--) evdev: Logitech M705: Found x and y relative axes
[ 10.911] (II) evdev: Logitech M705: Configuring as mouse
[ 10.911] (II) evdev: Logitech M705: Adding scrollwheel support
[ 10.911] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5
[ 10.911] (**) evdev: Logitech M705: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.911] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3/event1"
[ 10.911] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 9)
[ 10.911] (II) evdev: Logitech M705: initialized for relative axes.
[ 10.912] (**) Logitech M705: (accel) keeping acceleration scheme 1
[ 10.912] (**) Logitech M705: (accel) acceleration profile 0
[ 10.912] (**) Logitech M705: (accel) acceleration factor: 2.000
[ 10.912] (**) Logitech M705: (accel) acceleration threshold: 4
[ 10.912] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse0)
[ 10.912] (II) No input driver specified, ignoring this device.
[ 10.912] (II) This device may have been added with another device file.
[ 10.913] (II) config/udev: Adding input device Logitech K360 (/dev/input/event0)
[ 10.913] (**) Logitech K360: Applying InputClass "evdev keyboard catchall"
[ 10.913] (II) Using input driver 'evdev' for 'Logitech K360'
[ 10.913] (**) Logitech K360: always reports core events
[ 10.913] (**) evdev: Logitech K360: Device: "/dev/input/event0"
[ 10.913] (--) evdev: Logitech K360: Vendor 0x46d Product 0x4004
[ 10.913] (--) evdev: Logitech K360: Found 1 mouse buttons
[ 10.913] (--) evdev: Logitech K360: Found scroll wheel(s)
[ 10.913] (--) evdev: Logitech K360: Found relative axes
[ 10.913] (II) evdev: Logitech K360: Forcing relative x/y axes to exist.
[ 10.913] (--) evdev: Logitech K360: Found absolute axes
[ 10.913] (II) evdev: Logitech K360: Forcing absolute x/y axes to exist.
[ 10.913] (--) evdev: Logitech K360: Found keys
[ 10.913] (II) evdev: Logitech K360: Configuring as mouse
[ 10.913] (II) evdev: Logitech K360: Configuring as keyboard
[ 10.913] (II) evdev: Logitech K360: Adding scrollwheel support
[ 10.913] (**) evdev: Logitech K360: YAxisMapping: buttons 4 and 5
[ 10.913] (**) evdev: Logitech K360: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.913] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input2/event0"
[ 10.913] (II) XINPUT: Adding extended input device "Logitech K360" (type: KEYBOARD, id 10)
[ 10.913] (**) Option "xkb_rules" "evdev"
[ 10.913] (**) Option "xkb_model" "pc105"
[ 10.913] (**) Option "xkb_layout" "us"
[ 10.913] (II) evdev: Logitech K360: initialized for relative axes.
[ 10.913] (WW) evdev: Logitech K360: ignoring absolute axes.
[ 10.913] (**) Logitech K360: (accel) keeping acceleration scheme 1
[ 10.913] (**) Logitech K360: (accel) acceleration profile 0
[ 10.913] (**) Logitech K360: (accel) acceleration factor: 2.000
[ 10.913] (**) Logitech K360: (accel) acceleration threshold: 4
[ 10.914] (II) config/udev: Adding input device Chinese-made Xbox Controller (/dev/input/event26)
[ 10.914] (II) No input driver specified, ignoring this device.
[ 10.914] (II) This device may have been added with another device file.
[ 10.914] (II) config/udev: Adding input device Chinese-made Xbox Controller (/dev/input/js0)
[ 10.914] (II) No input driver specified, ignoring this device.
[ 10.914] (II) This device may have been added with another device file.
[ 10.915] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event25)
[ 10.915] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10.915] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 10.915] (**) Eee PC WMI hotkeys: always reports core events
[ 10.915] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event25"
[ 10.915] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 10.915] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 10.915] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 10.915] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input28/event25"
[ 10.915] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 10.915] (**) Option "xkb_rules" "evdev"
[ 10.915] (**) Option "xkb_model" "pc105"
[ 10.915] (**) Option "xkb_layout" "us"
[ 10.915] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[ 10.915] (II) No input driver specified, ignoring this device.
[ 10.915] (II) This device may have been added with another device file.
[ 10.921] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 10.928] (II) fglrx(1): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 22.026] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 22.026] (II) fglrx(0): Using EDID range info for horizontal sync
[ 22.026] (II) fglrx(0): Using EDID range info for vertical refresh
[ 22.026] (II) fglrx(0): Printing DDC gathered Modelines:
[ 22.026] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 22.026] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 22.026] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 22.026] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 22.026] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 22.026] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 22.026] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 22.026] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 22.026] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 22.026] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 22.026] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 22.026] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 22.026] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 22.026] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 22.026] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 22.026] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 22.026] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 795.541] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 795.541] (II) fglrx(0): Using hsync ranges from config file
[ 795.541] (II) fglrx(0): Using vrefresh ranges from config file
[ 795.541] (II) fglrx(0): Printing DDC gathered Modelines:
[ 795.541] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 795.541] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 795.541] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 795.541] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 795.541] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 795.541] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 795.541] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 795.541] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 795.541] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 795.541] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 795.541] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 795.541] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 795.541] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 795.541] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 795.541] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 795.541] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 795.541] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 7505.555] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 7505.555] (II) fglrx(0): Using hsync ranges from config file
[ 7505.555] (II) fglrx(0): Using vrefresh ranges from config file
[ 7505.555] (II) fglrx(0): Printing DDC gathered Modelines:
[ 7505.555] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 7505.555] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 7505.555] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 15004.878] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 15004.878] (II) fglrx(0): Using hsync ranges from config file
[ 15004.878] (II) fglrx(0): Using vrefresh ranges from config file
[ 15004.878] (II) fglrx(0): Printing DDC gathered Modelines:
[ 15004.878] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 15004.878] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 15004.878] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 19546.093] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 19546.093] (II) fglrx(0): Using hsync ranges from config file
[ 19546.093] (II) fglrx(0): Using vrefresh ranges from config file
[ 19546.093] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19546.093] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 19546.093] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 19546.093] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 19546.094] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 19546.094] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 19546.094] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 28808.091] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 28808.091] (II) fglrx(0): Using hsync ranges from config file
[ 28808.091] (II) fglrx(0): Using vrefresh ranges from config file
[ 28808.091] (II) fglrx(0): Printing DDC gathered Modelines:
[ 28808.091] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 28808.091] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 28808.091] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
[ 33711.708] (II) fglrx(0): EDID vendor "AOC", prod id 6480
[ 33711.708] (II) fglrx(0): Using hsync ranges from config file
[ 33711.708] (II) fglrx(0): Using vrefresh ranges from config file
[ 33711.708] (II) fglrx(0): Printing DDC gathered Modelines:
[ 33711.709] (II) fglrx(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 33711.709] (II) fglrx(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 33711.709] (II) fglrx(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4718462
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5564466
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=4718442
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=5562045
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5518324
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5576659
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5518826
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5576658
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5523973
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5621006
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=9"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5521134
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5621020
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=10"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5521899
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5620835
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=11"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5521104
P: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5638013
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input10
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_08_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=10"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5507114
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input10/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input10/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6552885
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input11
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_08_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=11"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5507815
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input11/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input11/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6564504
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input6
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input6
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_08_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=4723877
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input6/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input6/event4
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6557042
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input7
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input7
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_08_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5268891
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input7/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input7/event5
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6557050
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input8
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input8
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_08_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5275813
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input8/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input8/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6557041
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input9
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input9
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_08_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=9"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=5281292
P: /devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input9/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:08:00.1/sound/card2/input9/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:08:00.1
E: ID_PATH_TAG=pci-0000_08_00_1
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6560739
P: /devices/pci0000:00/0000:00:12.2/usb7/7-1/7-1:1.0/input/input30
E: DEVPATH=/devices/pci0000:00/0000:00:12.2/usb7/7-1/7-1:1.0/input/input30
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_12_2-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Webcam_C110
E: ID_MODEL_ENC=Webcam\x20C110
E: ID_MODEL_ID=0829
E: ID_PATH=pci-0000:00:12.2-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_12_2-usb-0_1_1_0
E: ID_REVISION=28a6
E: ID_SERIAL=_Webcam_C110
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:010100:010200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR_ENC=\x20
E: ID_VENDOR_ID=046d
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v046Dp0829e28A6-e0,1,kD4,ramlsfw
E: NAME="Webcam C110"
E: PHYS="usb-0000:00:12.2-1/button"
E: PRODUCT=3/46d/829/28a6
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5687107
P: /devices/pci0000:00/0000:00:12.2/usb7/7-1/7-1:1.0/input/input30/event27
N: input/event27
S: input/by-id/usb-_Webcam_C110-event-if00
S: input/by-path/pci-0000:00:12.2-usb-0:1:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-_Webcam_C110-event-if00 /dev/input/by-path/pci-0000:00:12.2-usb-0:1:1.0-event
E: DEVNAME=/dev/input/event27
E: DEVPATH=/devices/pci0000:00/0000:00:12.2/usb7/7-1/7-1:1.0/input/input30/event27
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Webcam_C110
E: ID_MODEL_ENC=Webcam\x20C110
E: ID_MODEL_ID=0829
E: ID_PATH=pci-0000:00:12.2-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_12_2-usb-0_1_1_0
E: ID_REVISION=28a6
E: ID_SERIAL=_Webcam_C110
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:010100:010200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR_ENC=\x20
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=91
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5724928
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input20
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input20
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA ATI SB Front Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=5526217
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input20/event17
N: input/event17
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input20/event17
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5644571
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input21
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input21
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA ATI SB Rear Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=5526283
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input21/event18
N: input/event18
E: DEVNAME=/dev/input/event18
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input21/event18
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=82
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5644593
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input22
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input22
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD,
E: NAME="HDA ATI SB Line"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=2000
E: TAGS=:seat:
E: USEC_INITIALIZED=5527009
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input22/event19
N: input/event19
E: DEVNAME=/dev/input/event19
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input22/event19
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=83
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5660423
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input23
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input23
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA ATI SB Line Out Front"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=5527275
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input23/event20
N: input/event20
E: DEVNAME=/dev/input/event20
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input23/event20
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=84
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5664520
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input24
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input24
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA ATI SB Line Out Surround"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=5527192
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input24/event21
N: input/event21
E: DEVNAME=/dev/input/event21
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input24/event21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=85
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5681183
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input25
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input25
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA ATI SB Line Out CLFE"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=5528139
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input25/event22
N: input/event22
E: DEVNAME=/dev/input/event22
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input25/event22
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=86
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5676983
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input26
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input26
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA ATI SB Line Out Side"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=5528128
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input26/event23
N: input/event23
E: DEVNAME=/dev/input/event23
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input26/event23
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=87
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5676891
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input27
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input27
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_14_2
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA ATI SB Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=5529802
P: /devices/pci0000:00/0000:00:14.2/sound/card0/input27/event24
N: input/event24
E: DEVNAME=/dev/input/event24
E: DEVPATH=/devices/pci0000:00/0000:00:14.2/sound/card0/input27/event24
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:14.2
E: ID_PATH_TAG=pci-0000_00_14_2
E: MAJOR=13
E: MINOR=88
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5681184
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_16_2-usb-0_1_2_1_2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:16.2-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046Dp101Be0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech M705"
E: PHYS="usb-0000:00:16.2-1.2:2"
E: PRODUCT=3/46d/101b/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2338771
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse
S: input/by-path/pci-0000:00:16.2-usb-0:1.2:1.2-event-mouse
E: DEVLINKS=/dev/input/by-path/pci-0000:00:16.2-usb-0:1.2:1.2-event-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:16.2-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=65
E: MOUSE_DPI=800@166
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5554129
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-if02-mouse
S: input/by-path/pci-0000:00:16.2-usb-0:1.2:1.2-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse /dev/input/by-path/pci-0000:00:16.2-usb-0:1.2:1.2-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:101B.0005/input/input3/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:16.2-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2339062
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input2
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input2
E: EV=12001f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_16_2-usb-0_1_2_1_2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:16.2-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 1 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
E: LED=1f
E: MODALIAS=input:b0003v046Dp4004e0111-e0,1,2,3,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E0,E1,E4,E7,E8,E9,EA,EB,F0,F1,F4,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,197,198,199,19A,19C,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1AF,1B0,1B1,1B7,1BA,240,241,242,243,244,245,246,250,251,r6,a20,m4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Logitech K360"
E: PHYS="usb-0000:00:16.2-1.2:1"
E: PRODUCT=3/46d/4004/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2338759
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input2/event0
N: input/event0
S: input/by-id/usb-Logitech_USB_Receiver-if02-event-kbd
S: input/by-path/pci-0000:00:16.2-usb-0:1.2:1.2-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:16.2-usb-0:1.2:1.2-event-kbd /dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.2/9-1.2:1.2/0003:046D:C52B.0003/0003:046D:4004.0004/input/input2/event0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:16.2-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5553988
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1:1.0/input/input29
E: ABS=3003f
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1:1.0/input/input29
E: EV=20000b
E: FF=107030000 0
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_16_2-usb-0_1_4_1_1_0
E: ID_INPUT=1
E: ID_INPUT_JOYSTICK=1
E: ID_MODEL=ffff
E: ID_MODEL_ENC=ffff
E: ID_MODEL_ID=ffff
E: ID_PATH=pci-0000:00:16.2-usb-0:1.4.1:1.0
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_4_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=ffff_ffff
E: ID_TYPE=generic
E: ID_USB_DRIVER=xpad
E: ID_USB_INTERFACES=:584200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=ffff
E: ID_VENDOR_ENC=ffff
E: ID_VENDOR_ID=ffff
E: KEY=6c3f000000000000 0 0 0 0
E: MODALIAS=input:b0003vFFFFpFFFFe0100-e0,1,3,15,k130,131,132,133,134,135,13A,13B,13D,13E,ra0,1,2,3,4,5,10,11,mlsf50,51,58,59,5A,60,w
E: NAME="Chinese-made Xbox Controller"
E: PHYS="usb-0000:00:16.2-1.4.1/input0"
E: PRODUCT=3/ffff/ffff/100
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5679007
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1:1.0/input/input29/event26
N: input/event26
S: input/by-id/usb-ffff_ffff-event-joystick
S: input/by-path/pci-0000:00:16.2-usb-0:1.4.1:1.0-event-joystick
E: DEVLINKS=/dev/input/by-id/usb-ffff_ffff-event-joystick /dev/input/by-path/pci-0000:00:16.2-usb-0:1.4.1:1.0-event-joystick
E: DEVNAME=/dev/input/event26
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1:1.0/input/input29/event26
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_16_2-usb-0_1_4_1_1_0
E: ID_INPUT=1
E: ID_INPUT_JOYSTICK=1
E: ID_MODEL=ffff
E: ID_MODEL_ENC=ffff
E: ID_MODEL_ID=ffff
E: ID_PATH=pci-0000:00:16.2-usb-0:1.4.1:1.0
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_4_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=ffff_ffff
E: ID_TYPE=generic
E: ID_USB_DRIVER=xpad
E: ID_USB_INTERFACES=:584200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=ffff
E: ID_VENDOR_ENC=ffff
E: ID_VENDOR_ID=ffff
E: MAJOR=13
E: MINOR=90
E: SUBSYSTEM=input
E: TAGS=:uaccess:seat:
E: USEC_INITIALIZED=5717072
P: /devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1:1.0/input/input29/js0
N: input/js0
S: input/by-id/usb-ffff_ffff-joystick
S: input/by-path/pci-0000:00:16.2-usb-0:1.4.1:1.0-joystick
E: DEVLINKS=/dev/input/by-path/pci-0000:00:16.2-usb-0:1.4.1:1.0-joystick /dev/input/by-id/usb-ffff_ffff-joystick
E: DEVNAME=/dev/input/js0
E: DEVPATH=/devices/pci0000:00/0000:00:16.2/usb9/9-1/9-1.4/9-1.4.1/9-1.4.1:1.0/input/input29/js0
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_16_2-usb-0_1_4_1_1_0
E: ID_INPUT=1
E: ID_INPUT_JOYSTICK=1
E: ID_MODEL=ffff
E: ID_MODEL_ENC=ffff
E: ID_MODEL_ID=ffff
E: ID_PATH=pci-0000:00:16.2-usb-0:1.4.1:1.0
E: ID_PATH_TAG=pci-0000_00_16_2-usb-0_1_4_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=ffff_ffff
E: ID_TYPE=generic
E: ID_USB_DRIVER=xpad
E: ID_USB_INTERFACES=:584200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=ffff
E: ID_VENDOR_ENC=ffff
E: ID_VENDOR_ID=ffff
E: MAJOR=13
E: MINOR=0
E: SUBSYSTEM=input
E: TAGS=:uaccess:seat:
E: USEC_INITIALIZED=5680607
P: /devices/platform/eeepc-wmi/input/input28
E: DEVPATH=/devices/platform/eeepc-wmi/input/input28
E: EV=100013
E: ID_FOR_SEAT=input-platform-eeepc-wmi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: KEY=7e40000 0 800000000000 0 0 1400b00100000 300180001100800 e000000000000 2
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,14,k71,72,73,8B,94,98,AB,AC,B8,B9,D4,E0,E1,E3,EE,F0,1AF,212,215,216,217,218,219,21A,ram4,lsfw
E: MSC=10
E: NAME="Eee PC WMI hotkeys"
E: PHYS="eeepc-wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5530044
P: /devices/platform/eeepc-wmi/input/input28/event25
N: input/event25
S: input/by-path/platform-eeepc-wmi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-eeepc-wmi-event
E: DEVNAME=/dev/input/event25
E: DEVPATH=/devices/platform/eeepc-wmi/input/input28/event25
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: MAJOR=13
E: MINOR=89
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5687739
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/pcspkr/input/input18
E: DEVPATH=/devices/platform/pcspkr/input/input18
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=5522995
P: /devices/platform/pcspkr/input/input18/event16
N: input/event16
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/platform/pcspkr/input/input18/event16
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=5648784
DRM Information from dmesg:
---------------------------
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb0000000-0xb3ffffff] (65536KB)
[ 1.194276] PCI-DMA: Disabling AGP.
[ 1.194343] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.201028] Linux agpgart interface v0.103
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.0.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xorg depends on:
ii konsole [x-terminal-emulator] 4:15.04.3-2
ii libgl1-mesa-dri 10.6.3-1
ii libgl1-mesa-glx [libgl1] 10.6.3-1
ii libglu1-mesa 9.0.0-2
ii lxterminal [x-terminal-emulator] 0.2.0-1
ii mate-terminal [x-terminal-emulator] 1.8.1+dfsg1-5
ii x11-apps 7.7+5
ii x11-session-utils 7.7+2
ii x11-utils 7.7+3
ii x11-xkb-utils 7.7+2
ii x11-xserver-utils 7.7+4
ii xauth 1:1.0.9-1
ii xfonts-100dpi 1:1.0.4+nmu1
ii xfonts-75dpi 1:1.0.4+nmu1
ii xfonts-base 1:1.0.4+nmu1
ii xfonts-scalable 1:1.0.3-1.1
ii xfonts-utils 1:7.7+3
ii xinit 1.3.4-1
ii xkb-data 2.14-1
ii xorg-docs-core 1:1.7-1
ii xserver-xorg 1:7.7+9
ii xterm [x-terminal-emulator] 318-2
xorg recommends no packages.
Versions of packages xorg suggests:
pn x11-xfs-utils <none>
pn xorg-docs <none>
Versions of packages xserver-xorg depends on:
ii fglrx-driver [xorg-driver-video] 1:15.7-1
ii libc6 2.19-19
ii x11-xkb-utils 7.7+2
ii xkb-data 2.14-1
ii xserver-xorg-core 2:1.17.2-1
ii xserver-xorg-input-all 1:7.7+9
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.9.2-1
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.1-1
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.8.2-1
ii xserver-xorg-input-vmmouse [xorg-driver-input] 1:13.0.99-1
ii xserver-xorg-input-wacom [xorg-driver-input] 0.30.0-1
ii xserver-xorg-video-all 1:7.7+9
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.5.0-1+b1
ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.3-1
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b3
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.99.917-2
ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.5-1
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.4-1+b1
ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.9-1
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.11-1+b1
ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.3.3-1+b3
ii xserver-xorg-video-qxl [xorg-driver-video] 0.1.4-3
ii xserver-xorg-video-r128 [xorg-driver-video] 6.10.0-1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.5.0-1+b1
ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.8-1
ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.6-2+b3
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.6-1+b1
ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.7-1+b1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.3-1+b4
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.1.0-2
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 10.6.3-1
-- no debconf information
Reply to: