xfonts-100dpi: Changes to 'debian-unstable'
debian/changelog | 9
debian/compat | 2
debian/control | 3
debian/rules | 18 -
debian/xsfbs/repack.sh | 32 --
debian/xsfbs/xsfbs.mk | 285 ----------------------
debian/xsfbs/xsfbs.sh | 622 -------------------------------------------------
7 files changed, 19 insertions(+), 952 deletions(-)
New commits:
commit 3854a1b003e6edb7c0f0eed2fad576fbc563f476
Author: Julien Cristau <jcristau@debian.org>
Date: Mon Feb 2 08:36:13 2015 +0100
Upload to unstable
diff --git a/debian/changelog b/debian/changelog
index d6d3b54..0a97699 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,11 +1,11 @@
-xfonts-100dpi (1:1.0.4) UNRELEASED; urgency=medium
+xfonts-100dpi (1:1.0.4) unstable; urgency=medium
* Get rid of xsfbs.
* Remove Cyril and David from Uploaders.
* Bump debhelper compat level to 7.
* Set GZIP=-n on build to avoid putting timestamps in compressed font files.
- -- Julien Cristau <jcristau@debian.org> Mon, 02 Feb 2015 08:28:30 +0100
+ -- Julien Cristau <jcristau@debian.org> Mon, 02 Feb 2015 08:35:16 +0100
xfonts-100dpi (1:1.0.3) unstable; urgency=low
commit ab42317bcb8807e52928eb60eaa318979b5f870f
Author: Julien Cristau <jcristau@debian.org>
Date: Mon Feb 2 08:33:26 2015 +0100
Set GZIP=-n on build to avoid putting timestamps in compressed font files.
diff --git a/debian/changelog b/debian/changelog
index 5c47897..d6d3b54 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -3,6 +3,7 @@ xfonts-100dpi (1:1.0.4) UNRELEASED; urgency=medium
* Get rid of xsfbs.
* Remove Cyril and David from Uploaders.
* Bump debhelper compat level to 7.
+ * Set GZIP=-n on build to avoid putting timestamps in compressed font files.
-- Julien Cristau <jcristau@debian.org> Mon, 02 Feb 2015 08:28:30 +0100
diff --git a/debian/rules b/debian/rules
index 80ecd87..0b2e656 100755
--- a/debian/rules
+++ b/debian/rules
@@ -44,7 +44,7 @@ $(STAMP_DIR)/build-%:
--mandir=\$${prefix}/share/man \
--infodir=\$${prefix}/share/info \
$(confflags)
- $(MAKE) -C $*-build
+ $(MAKE) -C $*-build GZIP=-n
>$@
build: build-stamp
commit 203584bfe7126f10604ecdc1bc424734bd714659
Author: Julien Cristau <jcristau@debian.org>
Date: Mon Feb 2 08:31:40 2015 +0100
Bump debhelper compat level to 7.
diff --git a/debian/changelog b/debian/changelog
index aba597c..5c47897 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -2,6 +2,7 @@ xfonts-100dpi (1:1.0.4) UNRELEASED; urgency=medium
* Get rid of xsfbs.
* Remove Cyril and David from Uploaders.
+ * Bump debhelper compat level to 7.
-- Julien Cristau <jcristau@debian.org> Mon, 02 Feb 2015 08:28:30 +0100
diff --git a/debian/compat b/debian/compat
index 7ed6ff8..7f8f011 100644
--- a/debian/compat
+++ b/debian/compat
@@ -1 +1 @@
-5
+7
diff --git a/debian/control b/debian/control
index 246cad9..ea28e2e 100644
--- a/debian/control
+++ b/debian/control
@@ -2,7 +2,7 @@ Source: xfonts-100dpi
Section: fonts
Priority: optional
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
-Build-Depends: debhelper (>= 5.0.31), pkg-config, xfonts-utils (>= 1:7.5)
+Build-Depends: debhelper (>= 7), pkg-config, xfonts-utils (>= 1:7.5)
Standards-Version: 3.8.3
Package: xfonts-100dpi
diff --git a/debian/rules b/debian/rules
index 6d961db..80ecd87 100755
--- a/debian/rules
+++ b/debian/rules
@@ -53,7 +53,6 @@ build-stamp: $(addprefix $(STAMP_DIR)/build-,$(SUBDIRS))
clean:
dh_testdir
- rm -f build-stamp
rm -f config.cache config.log config.status
rm -f */config.cache */config.log */config.status
rm -f conftest* */conftest*
@@ -83,7 +82,7 @@ binary-indep: build install
dh_testroot
dh_installdocs
- dh_install --sourcedir=debian/tmp --fail-missing --exclude fonts.dir --exclude fonts.scale
+ dh_install --fail-missing --exclude fonts.dir --exclude fonts.scale
dh_installxfonts
dh_installchangelogs
dh_compress
commit 1ae9addec52338ae9be299e60795f855b9ad519c
Author: Julien Cristau <jcristau@debian.org>
Date: Mon Feb 2 08:30:25 2015 +0100
Remove Cyril and David from Uploaders.
diff --git a/debian/changelog b/debian/changelog
index 1df6a51..aba597c 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,6 +1,7 @@
xfonts-100dpi (1:1.0.4) UNRELEASED; urgency=medium
* Get rid of xsfbs.
+ * Remove Cyril and David from Uploaders.
-- Julien Cristau <jcristau@debian.org> Mon, 02 Feb 2015 08:28:30 +0100
diff --git a/debian/control b/debian/control
index d443833..246cad9 100644
--- a/debian/control
+++ b/debian/control
@@ -2,7 +2,6 @@ Source: xfonts-100dpi
Section: fonts
Priority: optional
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
-Uploaders: David Nusinow <dnusinow@debian.org>, Cyril Brulebois <kibi@debian.org>
Build-Depends: debhelper (>= 5.0.31), pkg-config, xfonts-utils (>= 1:7.5)
Standards-Version: 3.8.3
commit 94a8f83f43c0913199c1c121b676d1be56723d46
Author: Julien Cristau <jcristau@debian.org>
Date: Mon Feb 2 08:30:13 2015 +0100
Get rid of xsfbs.
diff --git a/debian/changelog b/debian/changelog
index 501aea2..1df6a51 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+xfonts-100dpi (1:1.0.4) UNRELEASED; urgency=medium
+
+ * Get rid of xsfbs.
+
+ -- Julien Cristau <jcristau@debian.org> Mon, 02 Feb 2015 08:28:30 +0100
+
xfonts-100dpi (1:1.0.3) unstable; urgency=low
[ Julien Cristau ]
diff --git a/debian/rules b/debian/rules
index d6e892b..6d961db 100755
--- a/debian/rules
+++ b/debian/rules
@@ -10,13 +10,13 @@
# set this to the name of the main shlib's binary package
PACKAGE = xfonts-100dpi
-include debian/xsfbs/xsfbs.mk
-
ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
MAKEFLAGS += -j$(NUMJOBS)
endif
+STAMP_DIR = debian/stamps
+
# This package contains multiple modules as shipped by upstream. Each module is
# contained in a subdirectory in the root dir of the package. You must list
# each subdirectory explicitly so that the build system knows what to build.
@@ -36,6 +36,7 @@ else
endif
$(STAMP_DIR)/build-%:
+ mkdir -p $(STAMP_DIR)
mkdir -p $*-build
cd $*-build && \
../$*/configure \
@@ -47,20 +48,18 @@ $(STAMP_DIR)/build-%:
>$@
build: build-stamp
-build-stamp: $(STAMP_DIR)/prepare $(addprefix $(STAMP_DIR)/build-,$(SUBDIRS))
+build-stamp: $(addprefix $(STAMP_DIR)/build-,$(SUBDIRS))
>$@
-clean: xsfclean
+clean:
dh_testdir
- dh_testroot
rm -f build-stamp
-
rm -f config.cache config.log config.status
rm -f */config.cache */config.log */config.status
rm -f conftest* */conftest*
rm -rf autom4te.cache */autom4te.cache
rm -rf *-build
-
+ rm -rf $(STAMP_DIR)
dh_clean
install: build
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
deleted file mode 100755
index 5935cc9..0000000
--- a/debian/xsfbs/repack.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
- exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
- exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
- exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
deleted file mode 100755
index 3c59c20..0000000
--- a/debian/xsfbs/xsfbs.mk
+++ /dev/null
@@ -1,285 +0,0 @@
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1000@debian.org>
-# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
-# Modified by Adam Heath <doogie@debian.org>
-# Modified by Branden Robinson <branden@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
-# Modified by David Nusinow <dnusinow@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the codename of a release in the Debian part of the
-# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
- ARCH:=$(ARCH)
- else
- ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-# 1) A target name that is invoked by a package-building tool or the user.
-# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-# 2) A line delcaring 1) as a phony target (".PHONY:").
-# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-# depend on other targets.
-# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-# "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir". Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again. Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
- mkdir $(STAMP_DIR)
- >$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/logdir $(STAMP_DIR)/genscripts
- >$@
-
-.PHONY: logdir
-stampdir_targets+=logdir
-logdir: $(STAMP_DIR)/logdir
-$(STAMP_DIR)/logdir: $(STAMP_DIR)/stampdir
- mkdir -p $(STAMP_DIR)/log
- >$@
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
- if ! [ `which quilt` ]; then \
- echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
- exit 1; \
- fi; \
- if $(QUILT) next >/dev/null 2>&1; then \
- echo -n "Applying patches..."; \
- if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
- cat $(STAMP_DIR)/log/patch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/patch; \
- echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "No patches to apply"; \
- fi; \
- >$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/logdir
- rm -f $(STAMP_DIR)/patch
- @echo -n "Unapplying patches..."; \
- if $(QUILT) applied >/dev/null 2>/dev/null; then \
- if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "nothing to do."; \
- fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
- rm -f $(STAMP_DIR)/genscripts
- rm -f debian/*.config \
- debian/*.postinst \
- debian/*.postrm \
- debian/*.preinst \
- debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
- dh_testdir
- rm -rf .pc
- rm -rf $(STAMP_DIR)
- dh_clean
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems. It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
- # Ensure we're in the correct directory.
- dh_testdir
- grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
- @echo -n "Auditing patches..."; \
- >$(STAMP_DIR)/log/patch; \
- FUZZY=; \
- while [ -n "$$($(QUILT) next)" ]; do \
- RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
- case "$$RESULT" in \
- succeeded) \
- echo "fuzzy patch: $$($(QUILT) top)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
- FUZZY=yes; \
- ;; \
- FAILED) \
- echo "broken patch: $$($(QUILT) next)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
- exit 1; \
- ;; \
- esac; \
- done; \
- if [ -n "$$FUZZY" ]; then \
- echo "there were fuzzy patches; please fix."; \
- exit 1; \
- else \
- echo "done."; \
- fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
- for FILE in debian/*.config.in \
- debian/*.postinst.in \
- debian/*.postrm.in \
- debian/*.preinst.in \
- debian/*.prerm.in; do \
- if [ -e "$$FILE" ]; then \
- MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
- sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
- cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
- sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
- sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
- -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
- <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
- rm $$MAINTSCRIPT.tmp; \
- fi; \
- done
- # Validate syntax of generated shell scripts.
- #sh debian/scripts/validate-posix-sh debian/*.config \
- # debian/*.postinst \
- # debian/*.postrm \
- # debian/*.preinst \
- # debian/*.prerm
- >$@
-
-# Compute dependencies for drivers
-#
-VIDEODEP = $(shell cat /usr/share/xserver-xorg/videodrvdep 2>/dev/null)
-INPUTDEP = $(shell cat /usr/share/xserver-xorg/xinputdep 2>/dev/null)
-
-# these two can be removed post-squeeze
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI), xorg-driver-video
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI), xorg-driver-input
-
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(VIDEODEP),)
- @echo 'error: xserver-xorg-dev >= 1.7.6.901 needs to be installed'
- @exit 1
-else
- echo "xviddriver:Depends=$(VIDEODEP)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Depends=$(INPUTDEP)" >> debian/$(PACKAGE).substvars
- # the following is there for compatibility...
- echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xserver:Depends=$(VIDEODEP), $(INPUTDEP)" >> debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
deleted file mode 100644
index 813fd8d..0000000
--- a/debian/xsfbs/xsfbs.sh
+++ /dev/null
@@ -1,622 +0,0 @@
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts. It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper operation
-# of those functions. By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
- DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
- DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
- RECONFIGURE="true"
-else
- RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
- FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
- UPGRADE="yes"
-fi
-
-trap "message;\
- message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
- message;\
- exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
- # syntax: reject_nondigits [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters other than decimal digits and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain anything but digits?
- if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- # can't use die(), because it wraps message() which wraps this function
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-reject_unlikely_path_chars () {
- # syntax: reject_unlikely_path_chars [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters unlikely to be seen in a path and which the shell might
- # interpret and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain any funny characters?
- if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
- "encountered possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user. This is used only as a fallback in the
-# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- DEFCOLUMNS=80
-fi
-
-message () {
- # pretty-print messages of arbitrary length
- reject_nondigits "$COLUMNS"
- echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
- # syntax: observe message ...
- #
- # issue observational message suitable for logging someday when support for
- # it exists in dpkg
- if [ -n "$DEBUG_XORG_PACKAGE" ]; then
- message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
- fi
-}
-
-warn () {
- # syntax: warn message ...
- #
- # issue warning message suitable for logging someday when support for
- # it exists in dpkg; also send to standard error
- message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
- # syntax: die message ...
- #
- # exit script with error message
- message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
- exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
- # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
- message "internal error: $*"
- if [ -n "$OFFICIAL_BUILD" ]; then
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- fi
- exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
- message "usage error: $*"
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- exit $SHELL_LIB_USAGE_ERROR
-}
-
-font_update () {
- # run $UPDATECMDS in $FONTDIRS
-
- local dir cmd shortcmd x_font_dir_prefix
-
- x_font_dir_prefix="/usr/share/fonts/X11"
-
- if [ -z "$UPDATECMDS" ]; then
- usage_error "font_update() called but \$UPDATECMDS not set"
- fi
- if [ -z "$FONTDIRS" ]; then
- usage_error "font_update() called but \$FONTDIRS not set"
- fi
-
- reject_unlikely_path_chars "$UPDATECMDS"
- reject_unlikely_path_chars "$FONTDIRS"
-
- for dir in $FONTDIRS; do
- if [ -d "$x_font_dir_prefix/$dir" ]; then
- for cmd in $UPDATECMDS; do
- if which "$cmd" > /dev/null 2>&1; then
- shortcmd=${cmd##*/}
- observe "running $shortcmd in $dir font directory"
- cmd_opts=
- if [ "$shortcmd" = "update-fonts-alias" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-dir" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-scale" ]; then
- cmd_opts=--x11r7-layout
- fi
- $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
- "failed; font directory data may not" \
- "be up to date"
- else
- warn "$cmd not found; not updating corresponding $dir font" \
- "directory data"
- fi
- done
- else
- warn "$dir is not a directory; not updating font directory data"
- fi
- done
-}
-
-remove_conffile_prepare () {
- # syntax: remove_conffile_prepare filename official_md5sum ...
- #
- # Check a conffile "filename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 2 ]; then
- usage_error "remove_conffile_prepare() called with wrong number of" \
- "arguments; expected at least 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
- shift
-
- # does the conffile even exist?
- if [ -e "$conffile" ]; then
- # calculate its checksum
- current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
- # compare it to each supplied checksum
- while [ -n "$1" ]; do
- if [ "$current_checksum" = "$1" ]; then
- # we found a match; move the confffile and stop looking
- observe "preparing obsolete conffile $conffile for removal"
- mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
- break
- fi
- shift
- done
- fi
-}
-
-remove_conffile_lookup () {
- # syntax: remove_conffile_lookup package filename
- #
- # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
- # if it matches the actual file's md5sum.
- #
- # Call this function when you would call remove_conffile_prepare but only
- # want to check against dpkg's status database instead of known checksums.
-
- local package conffile old_md5sum
-
- # validate arguments
- if [ $# -ne 2 ]; then
- usage_error "remove_conffile_lookup() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- package="$1"
- conffile="$2"
-
- if ! [ -e "$conffile" ]; then
- return
- fi
- old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
- awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
- if [ -n "$old_md5sum" ]; then
- remove_conffile_prepare "$conffile" "$old_md5sum"
- fi
-}
-
-remove_conffile_commit () {
- # syntax: remove_conffile_commit filename
- #
- # Complete the removal of a conffile "filename" that has become obsolete.
- #
- # Call this function from a postinst script after having used
- # remove_conffile_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_commit() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, remove it
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "committing removal of obsolete conffile $conffile"
- rm "$conffile.$THIS_PACKAGE-tmp"
- fi
-}
-
-remove_conffile_rollback () {
- # syntax: remove_conffile_rollback filename
- #
- # Roll back the removal of a conffile "filename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" is after having used remove_conffile_prepare() in the
- # preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_rollback() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, move it
- # back
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "rolling back removal of obsolete conffile $conffile"
- mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
- fi
-}
-
-replace_conffile_with_symlink_prepare () {
- # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
- # official_md5sum ...
- #
- # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails. Otherwise copy it
- # to newfilename and let dpkg handle it through conffiles mechanism.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 3 ]; then
- usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
- " number of arguments; expected at least 3, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- oldconffile="$1"
- shift
- newconffile="$1"
- shift
-
- remove_conffile_prepare "$_oldconffile" "$@"
- # If $oldconffile still exists, then md5sums didn't match.
- # Copy it to new one.
- if [ -f "$oldconffile" ]; then
- cp "$oldconffile" "$newconffile"
- fi
-
-}
-
-replace_conffile_with_symlink_commit () {
- # syntax: replace_conffile_with_symlink_commit oldfilename
- #
- # Complete the removal of a conffile "oldfilename" that has been
- # replaced by a symlink.
- #
- # Call this function from a postinst script after having used
- # replace_conffile_with_symlink_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "replace_conffile_with_symlink_commit() called with wrong" \
- "number of arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- remove_conffile_commit "$conffile"
-}
-
-replace_conffile_with_symlink_rollback () {
- # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
- #
- # Roll back the replacing of a conffile "oldfilename" with symlink to
- # "newfilename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" and verify $2 to ensure the package failed to upgrade
- # from a version (or install over a version removed-but-not-purged) prior
- # to the one in which the conffile was obsoleted.
- # You should have used replace_conffile_with_symlink_prepare() in the
- # preinst.
-
- local conffile
-
Reply to: