Bug#760044: xserver-xorg-video-nouveau: vga output erroneously reported connected both in xrandr and xorg.0.log
Package: xserver-xorg-video-nouveau
Version: 1:1.0.10-1+b2
Severity: normal
Hello
my xrandr output in current sid is
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
LVDS-1 connected 1600x900+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
1600x900 60.00*+
1152x864 59.96
1024x768 59.92
800x600 59.86
640x480 59.38
720x400 59.55
640x400 59.95
640x350 59.77
VGA-1 disconnected (normal left inverted right xaxis y axis)
DVI-D-1 disconnected (normal left inverted right x axis y axis)
VGA-2 connected (normal left inverted right x axis y axis)
1024x768 60.00
800x600 60.32 56.25
848x480 60.00
640x480 59.94
DP-1 disconnected (normal left inverted right x axis y axis)
however, no monitor is really connected to vga-2.
In wheezy, the xrandr output is infact
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
LVDS-1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1600x900 60.0*+
1152x864 60.0
1024x768 59.9
800x600 59.9
640x480 59.4
720x400 59.6
640x400 60.0
640x350 59.8
VGA-1 disconnected (normal left inverted right x axis y axis)
DVI-D-1 disconnected (normal left inverted right x axis y axis)
VGA-2 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
The nuisance is that my screen starts at reduced resolution.
Best regards and thank you for your work
Fulvio Ciriaco
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jun 4 18:40 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2356320 Jul 18 00:25 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218M [NVS 2100M] [10de:0a6a] (rev a2)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 30692 Jun 5 17:13 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 28321 Aug 31 09:07 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 22.480]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 22.480] X Protocol Version 11, Revision 0
[ 22.480] Build Operating System: Linux 3.14-1-amd64 x86_64 Debian
[ 22.480] Current Operating System: Linux fc 3.14-2-amd64 #1 SMP Debian 3.14.15-2 (2014-08-09) x86_64
[ 22.480] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=60bc171f-48fc-4e98-ac08-4d8333d4398b ro quiet
[ 22.480] Build Date: 17 July 2014 10:22:36PM
[ 22.480] xorg-server 2:1.16.0-1 (http://www.debian.org/support)
[ 22.480] Current version of pixman: 0.32.6
[ 22.480] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.480] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.481] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 31 08:54:34 2014
[ 22.508] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.660] (==) No Layout section. Using the first Screen section.
[ 22.660] (==) No screen section available. Using defaults.
[ 22.660] (**) |-->Screen "Default Screen Section" (0)
[ 22.660] (**) | |-->Monitor "<default monitor>"
[ 22.660] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.660] (==) Automatically adding devices
[ 22.660] (==) Automatically enabling devices
[ 22.660] (==) Automatically adding GPU devices
[ 22.755] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 22.755] Entry deleted from font path.
[ 22.904] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 22.904] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.904] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.904] (II) Loader magic: 0x7fba73c5bd80
[ 22.904] (II) Module ABI versions:
[ 22.904] X.Org ANSI C Emulation: 0.4
[ 22.904] X.Org Video Driver: 18.0
[ 22.904] X.Org XInput driver : 21.0
[ 22.904] X.Org Server Extension : 8.0
[ 22.904] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 22.913] (--) PCI:*(0:1:0:0) 10de:0a6a:1179:0001 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 22.946] (II) LoadModule: "glx"
[ 23.006] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.166] (II) Module glx: vendor="X.Org Foundation"
[ 23.166] compiled for 1.16.0, module version = 1.0.0
[ 23.166] ABI class: X.Org Server Extension, version 8.0
[ 23.166] (==) AIGLX enabled
[ 23.166] (==) Matched nouveau as autoconfigured driver 0
[ 23.166] (==) Matched nv as autoconfigured driver 1
[ 23.166] (==) Matched nouveau as autoconfigured driver 2
[ 23.166] (==) Matched nv as autoconfigured driver 3
[ 23.166] (==) Matched modesetting as autoconfigured driver 4
[ 23.166] (==) Matched fbdev as autoconfigured driver 5
[ 23.166] (==) Matched vesa as autoconfigured driver 6
[ 23.166] (==) Assigned the driver to the xf86ConfigLayout
[ 23.166] (II) LoadModule: "nouveau"
[ 23.171] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 23.201] (II) Module nouveau: vendor="X.Org Foundation"
[ 23.201] compiled for 1.15.99.904, module version = 1.0.10
[ 23.201] Module class: X.Org Video Driver
[ 23.201] ABI class: X.Org Video Driver, version 18.0
[ 23.201] (II) LoadModule: "nv"
[ 23.263] (WW) Warning, couldn't open module nv
[ 23.263] (II) UnloadModule: "nv"
[ 23.263] (II) Unloading nv
[ 23.263] (EE) Failed to load module "nv" (module does not exist, 0)
[ 23.263] (II) LoadModule: "modesetting"
[ 23.263] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 23.271] (II) Module modesetting: vendor="X.Org Foundation"
[ 23.271] compiled for 1.15.99.904, module version = 0.9.0
[ 23.271] Module class: X.Org Video Driver
[ 23.271] ABI class: X.Org Video Driver, version 18.0
[ 23.271] (II) LoadModule: "fbdev"
[ 23.271] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 23.287] (II) Module fbdev: vendor="X.Org Foundation"
[ 23.287] compiled for 1.15.99.904, module version = 0.4.4
[ 23.287] Module class: X.Org Video Driver
[ 23.287] ABI class: X.Org Video Driver, version 18.0
[ 23.287] (II) LoadModule: "vesa"
[ 23.287] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.292] (II) Module vesa: vendor="X.Org Foundation"
[ 23.292] compiled for 1.15.99.904, module version = 2.3.3
[ 23.292] Module class: X.Org Video Driver
[ 23.292] ABI class: X.Org Video Driver, version 18.0
[ 23.292] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 23.292] (II) NOUVEAU driver for NVIDIA chipset families :
[ 23.292] RIVA TNT (NV04)
[ 23.292] RIVA TNT2 (NV05)
[ 23.292] GeForce 256 (NV10)
[ 23.292] GeForce 2 (NV11, NV15)
[ 23.292] GeForce 4MX (NV17, NV18)
[ 23.292] GeForce 3 (NV20)
[ 23.292] GeForce 4Ti (NV25, NV28)
[ 23.292] GeForce FX (NV3x)
[ 23.292] GeForce 6 (NV4x)
[ 23.292] GeForce 7 (G7x)
[ 23.292] GeForce 8 (G8x)
[ 23.292] GeForce GTX 200 (NVA0)
[ 23.292] GeForce GTX 400 (NVC0)
[ 23.292] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 23.292] (II) FBDEV: driver for framebuffer: fbdev
[ 23.293] (II) VESA: driver for VESA chipsets: vesa
[ 23.293] (++) using VT number 7
[ 23.293] (II) [drm] nouveau interface version: 1.1.1
[ 23.293] (WW) Falling back to old probe method for modesetting
[ 23.294] (WW) Falling back to old probe method for fbdev
[ 23.294] (II) Loading sub module "fbdevhw"
[ 23.294] (II) LoadModule: "fbdevhw"
[ 23.294] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 23.294] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 23.294] compiled for 1.16.0, module version = 0.0.2
[ 23.294] ABI class: X.Org Video Driver, version 18.0
[ 23.294] (WW) Falling back to old probe method for vesa
[ 23.294] (II) Loading sub module "dri2"
[ 23.294] (II) LoadModule: "dri2"
[ 23.294] (II) Module "dri2" already built-in
[ 23.295] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[ 23.295] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.295] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 23.295] (==) NOUVEAU(0): RGB weight 888
[ 23.295] (==) NOUVEAU(0): Default visual is TrueColor
[ 23.295] (==) NOUVEAU(0): Using HW cursor
[ 23.295] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 23.295] (==) NOUVEAU(0): Page flipping enabled
[ 23.295] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 23.325] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 23.346] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 23.348] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 23.381] (II) NOUVEAU(0): Output VGA-2 has no monitor section
[ 23.508] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 23.508] (II) NOUVEAU(0): EDID for output LVDS-1
[ 23.508] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 23.508] (II) NOUVEAU(0): Modeline "1600x900"x60.0 97.79 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.6 kHz eP)
[ 23.508] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 23.508] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 23.508] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 23.508] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 23.508] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 23.508] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 23.508] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 23.529] (II) NOUVEAU(0): EDID for output VGA-1
[ 23.532] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 23.564] (II) NOUVEAU(0): EDID for output VGA-2
[ 23.564] (II) NOUVEAU(0): Printing probed modes for output VGA-2
[ 23.564] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.564] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.564] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 23.564] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 23.564] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 23.692] (II) NOUVEAU(0): EDID for output DP-1
[ 23.692] (II) NOUVEAU(0): Output LVDS-1 connected
[ 23.692] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 23.692] (II) NOUVEAU(0): Output DVI-D-1 disconnected
[ 23.692] (II) NOUVEAU(0): Output VGA-2 connected
[ 23.692] (II) NOUVEAU(0): Output DP-1 disconnected
[ 23.692] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 23.692] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1024x768
[ 23.692] (II) NOUVEAU(0): Output VGA-2 using initial mode 1024x768
[ 23.692] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.692] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 23.692] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 23.692] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.692] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 23.692] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.692] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 23.692] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 23.692] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 23.692] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 23.692] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 23.692] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 23.692] (==) NOUVEAU(0): DPI set to (96, 96)
[ 23.692] (II) Loading sub module "fb"
[ 23.692] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.723] (II) Module fb: vendor="X.Org Foundation"
[ 23.723] compiled for 1.16.0, module version = 1.0.0
[ 23.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.723] (II) Loading sub module "exa"
[ 23.723] (II) LoadModule: "exa"
[ 23.723] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 23.759] (II) Module exa: vendor="X.Org Foundation"
[ 23.759] compiled for 1.16.0, module version = 2.6.0
[ 23.759] ABI class: X.Org Video Driver, version 18.0
[ 23.759] (II) Loading sub module "shadowfb"
[ 23.759] (II) LoadModule: "shadowfb"
[ 23.760] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 23.785] (II) Module shadowfb: vendor="X.Org Foundation"
[ 23.785] compiled for 1.16.0, module version = 1.0.0
[ 23.785] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.785] (II) UnloadModule: "modesetting"
[ 23.785] (II) Unloading modesetting
[ 23.785] (II) UnloadModule: "fbdev"
[ 23.785] (II) Unloading fbdev
[ 23.785] (II) UnloadSubModule: "fbdevhw"
[ 23.785] (II) Unloading fbdevhw
[ 23.786] (II) UnloadModule: "vesa"
[ 23.786] (II) Unloading vesa
[ 23.786] (--) Depth 24 pixmap format is 32 bpp
[ 23.788] (II) NOUVEAU(0): Opened GPU channel 0
[ 23.831] (II) NOUVEAU(0): [DRI2] Setup complete
[ 23.831] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 23.831] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 23.834] (II) EXA(0): Driver allocated offscreen pixmaps
[ 23.834] (II) EXA(0): Driver registered support for the following operations:
[ 23.835] (II) Solid
[ 23.835] (II) Copy
[ 23.835] (II) Composite (RENDER acceleration)
[ 23.835] (II) UploadToScreen
[ 23.835] (II) DownloadFromScreen
[ 23.835] (==) NOUVEAU(0): Backing store enabled
[ 23.835] (==) NOUVEAU(0): Silken mouse enabled
[ 23.862] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 23.862] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 23.862] (==) NOUVEAU(0): DPMS enabled
[ 23.862] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.862] (--) RandR disabled
[ 23.883] (II) SELinux: Disabled on system
[ 24.928] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 24.928] (II) AIGLX: enabled GLX_ARB_create_context
[ 24.928] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 24.928] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 24.928] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 24.928] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 24.928] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 24.928] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 24.928] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 24.929] (II) AIGLX: Loaded and initialized nouveau
[ 24.929] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 24.931] (II) NOUVEAU(0): NVEnterVT is called.
[ 25.031] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 25.031] resize called 1024 768
[ 25.591] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 25.591] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.591] (II) LoadModule: "evdev"
[ 25.591] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 25.678] (II) Module evdev: vendor="X.Org Foundation"
[ 25.678] compiled for 1.16.0, module version = 2.9.0
[ 25.678] Module class: X.Org XInput Driver
[ 25.678] ABI class: X.Org XInput driver, version 21.0
[ 25.678] (II) Using input driver 'evdev' for 'Power Button'
[ 25.678] (**) Power Button: always reports core events
[ 25.678] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 25.678] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.678] (--) evdev: Power Button: Found keys
[ 25.678] (II) evdev: Power Button: Configuring as keyboard
[ 25.678] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[ 25.678] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 25.678] (**) Option "xkb_rules" "evdev"
[ 25.678] (**) Option "xkb_model" "pc105"
[ 25.678] (**) Option "xkb_layout" "gb"
[ 25.857] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 25.857] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 25.857] (II) Using input driver 'evdev' for 'Video Bus'
[ 25.857] (**) Video Bus: always reports core events
[ 25.857] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 25.857] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 25.857] (--) evdev: Video Bus: Found keys
[ 25.857] (II) evdev: Video Bus: Configuring as keyboard
[ 25.857] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6/event4"
[ 25.857] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 25.857] (**) Option "xkb_rules" "evdev"
[ 25.857] (**) Option "xkb_model" "pc105"
[ 25.857] (**) Option "xkb_layout" "gb"
[ 25.858] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 25.858] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 25.858] (II) Using input driver 'evdev' for 'Power Button'
[ 25.858] (**) Power Button: always reports core events
[ 25.858] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 25.858] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 25.858] (--) evdev: Power Button: Found keys
[ 25.858] (II) evdev: Power Button: Configuring as keyboard
[ 25.858] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event1"
[ 25.858] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 25.858] (**) Option "xkb_rules" "evdev"
[ 25.858] (**) Option "xkb_model" "pc105"
[ 25.858] (**) Option "xkb_layout" "gb"
[ 25.859] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 25.859] (II) No input driver specified, ignoring this device.
[ 25.859] (II) This device may have been added with another device file.
[ 25.859] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[ 25.859] (II) No input driver specified, ignoring this device.
[ 25.859] (II) This device may have been added with another device file.
[ 25.860] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event12)
[ 25.860] (II) No input driver specified, ignoring this device.
[ 25.860] (II) This device may have been added with another device file.
[ 25.860] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[ 25.860] (II) No input driver specified, ignoring this device.
[ 25.860] (II) This device may have been added with another device file.
[ 25.860] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event10)
[ 25.860] (II) No input driver specified, ignoring this device.
[ 25.860] (II) This device may have been added with another device file.
[ 25.861] (II) config/udev: Adding input device USB2.0 UVC WebCam (/dev/input/event16)
[ 25.861] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 25.861] (II) Using input driver 'evdev' for 'USB2.0 UVC WebCam'
[ 25.861] (**) USB2.0 UVC WebCam: always reports core events
[ 25.861] (**) evdev: USB2.0 UVC WebCam: Device: "/dev/input/event16"
[ 25.861] (--) evdev: USB2.0 UVC WebCam: Vendor 0x4f2 Product 0xb130
[ 25.861] (--) evdev: USB2.0 UVC WebCam: Found keys
[ 25.861] (II) evdev: USB2.0 UVC WebCam: Configuring as keyboard
[ 25.861] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18/event16"
[ 25.861] (II) XINPUT: Adding extended input device "USB2.0 UVC WebCam" (type: KEYBOARD, id 9)
[ 25.861] (**) Option "xkb_rules" "evdev"
[ 25.861] (**) Option "xkb_model" "pc105"
[ 25.861] (**) Option "xkb_layout" "gb"
[ 25.862] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 25.862] (II) No input driver specified, ignoring this device.
[ 25.862] (II) This device may have been added with another device file.
[ 25.862] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
[ 25.862] (II) No input driver specified, ignoring this device.
[ 25.862] (II) This device may have been added with another device file.
[ 25.862] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[ 25.862] (II) No input driver specified, ignoring this device.
[ 25.862] (II) This device may have been added with another device file.
[ 25.863] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 25.863] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 25.863] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 25.863] (**) AT Translated Set 2 keyboard: always reports core events
[ 25.863] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 25.863] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 25.863] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 25.863] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 25.863] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 25.863] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 25.863] (**) Option "xkb_rules" "evdev"
[ 25.863] (**) Option "xkb_model" "pc105"
[ 25.863] (**) Option "xkb_layout" "gb"
[ 25.863] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event14)
[ 25.863] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 25.863] (II) Using input driver 'evdev' for 'DualPoint Stick'
[ 25.863] (**) DualPoint Stick: always reports core events
[ 25.863] (**) evdev: DualPoint Stick: Device: "/dev/input/event14"
[ 25.864] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
[ 25.864] (--) evdev: DualPoint Stick: Found 3 mouse buttons
[ 25.864] (--) evdev: DualPoint Stick: Found relative axes
[ 25.864] (--) evdev: DualPoint Stick: Found x and y relative axes
[ 25.864] (II) evdev: DualPoint Stick: Configuring as mouse
[ 25.864] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 25.864] (**) evdev: DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 25.864] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event14"
[ 25.864] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 11)
[ 25.864] (II) evdev: DualPoint Stick: initialized for relative axes.
[ 25.864] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[ 25.864] (**) DualPoint Stick: (accel) acceleration profile 0
[ 25.864] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[ 25.864] (**) DualPoint Stick: (accel) acceleration threshold: 4
[ 25.864] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
[ 25.864] (II) No input driver specified, ignoring this device.
[ 25.864] (II) This device may have been added with another device file.
[ 25.864] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event15)
[ 25.864] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 25.864] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 25.864] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 25.864] (II) LoadModule: "synaptics"
[ 25.865] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 25.875] (II) Module synaptics: vendor="X.Org Foundation"
[ 25.875] compiled for 1.15.99.904, module version = 1.8.0
[ 25.875] Module class: X.Org XInput Driver
[ 25.875] ABI class: X.Org XInput driver, version 21.0
[ 25.875] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 25.875] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.875] (**) Option "Device" "/dev/input/event15"
[ 25.944] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023 (res 0)
[ 25.944] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767 (res 0)
[ 25.944] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 25.944] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 25.944] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
[ 25.944] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 25.944] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 25.944] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.944] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 25.984] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event15"
[ 25.985] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 12)
[ 25.985] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 25.985] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 25.985] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.156
[ 25.985] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 25.985] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 25.985] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 25.985] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 25.985] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 25.986] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[ 25.986] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 25.986] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 25.986] (II) No input driver specified, ignoring this device.
[ 25.986] (II) This device may have been added with another device file.
[ 25.987] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7)
[ 25.987] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[ 25.987] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 25.987] (**) Toshiba input device: always reports core events
[ 25.987] (**) evdev: Toshiba input device: Device: "/dev/input/event7"
[ 25.987] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 25.987] (--) evdev: Toshiba input device: Found keys
[ 25.987] (II) evdev: Toshiba input device: Configuring as keyboard
[ 25.987] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event7"
[ 25.987] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 13)
[ 25.987] (**) Option "xkb_rules" "evdev"
[ 25.987] (**) Option "xkb_model" "pc105"
[ 25.987] (**) Option "xkb_layout" "gb"
[ 25.988] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event17)
[ 25.988] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 25.988] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 25.988] (**) ACPI Virtual Keyboard Device: always reports core events
[ 25.988] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event17"
[ 25.988] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 25.988] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 25.988] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 25.988] (**) Option "config_info" "udev:/sys/devices/virtual/input/input19/event17"
[ 25.988] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[ 25.988] (**) Option "xkb_rules" "evdev"
[ 25.988] (**) Option "xkb_model" "pc105"
[ 25.988] (**) Option "xkb_layout" "gb"
[ 67.869] resize called 1600 900
[ 794.716] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 794.716] (II) NOUVEAU(0): NVLeaveVT is called.
[ 801.579] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 801.579] (II) NOUVEAU(0): NVEnterVT is called.
[ 801.789] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=35876
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=65578
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=55220
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=66251
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=31354
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=63852
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=32630
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=64545
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=68789
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=68919
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=68553
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=68698
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=68323
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=68455
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_01_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA NVidia HDMI/DP,pcm=9"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=68136
P: /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:01:00.1
E: ID_PATH_TAG=pci-0000_01_00_1
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=68240
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1a_0-usb-0_1_4_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_UVC_WebCam
E: ID_MODEL_ENC=USB2.0\x20UVC\x20WebCam
E: ID_MODEL_ID=b130
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.4:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_4_1_0
E: ID_REVISION=7730
E: ID_SERIAL=Chicony_USB2.0_UVC_WebCam_CNA8155-000001
E: ID_SERIAL_SHORT=CNA8155-000001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony
E: ID_VENDOR_ENC=Chicony
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB130e7730-e0,1,kD4,ramlsfw
E: NAME="USB2.0 UVC WebCam"
E: PHYS="usb-0000:00:1a.0-1.4/button"
E: PRODUCT=3/4f2/b130/7730
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=53543
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18/event16
N: input/event16
S: input/by-id/usb-Chicony_USB2.0_UVC_WebCam_CNA8155-000001-event-if00
S: input/by-path/pci-0000:00:1a.0-usb-0:1.4:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Chicony_USB2.0_UVC_WebCam_CNA8155-000001-event-if00 /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.4:1.0-event
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input18/event16
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_UVC_WebCam
E: ID_MODEL_ENC=USB2.0\x20UVC\x20WebCam
E: ID_MODEL_ID=b130
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.4:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_4_1_0
E: ID_REVISION=7730
E: ID_SERIAL=Chicony_USB2.0_UVC_WebCam_CNA8155-000001
E: ID_SERIAL_SHORT=CNA8155-000001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony
E: ID_VENDOR_ENC=Chicony
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=53598
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/input/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input7
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0268e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/268/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=11830
P: /devices/pci0000:00/0000:00:1b.0/input/input7/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input7/event5
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=66922
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel MID Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=8968
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9025
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel MID Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=8778
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8847
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=96053
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=62810
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input13
E: DEVPATH=/devices/platform/i8042/serio1/input/input13
E: EV=7
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0011v0002p0008e0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="DualPoint Stick"
E: PHYS="isa0060/serio1/input1"
E: PRODUCT=11/2/8/0
E: PROP=0
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=48868
P: /devices/platform/i8042/serio1/input/input13/event14
N: input/event14
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/platform/i8042/serio1/input/input13/event14
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=48937
P: /devices/platform/i8042/serio1/input/input13/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input13/mouse0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=48892
P: /devices/platform/i8042/serio1/input/input8
E: ABS=1000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input8
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=420 70000 0 0 0 0
E: MODALIAS=input:b0011v0002p0008e0200-e0,1,3,k110,111,112,145,14A,ra0,1,18,mlsfw
E: NAME="AlpsPS/2 ALPS DualPoint TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/8/200
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=7464326
P: /devices/platform/i8042/serio1/input/input8/event15
N: input/event15
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event15
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=64393
P: /devices/platform/i8042/serio1/input/input8/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/mouse1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=64351
P: /devices/platform/pcspkr/input/input9
E: DEVPATH=/devices/platform/pcspkr/input/input9
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=86248
P: /devices/platform/pcspkr/input/input9/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/pcspkr/input/input9/event6
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=86964
P: /devices/virtual/input/input10
E: DEVPATH=/devices/virtual/input/input10
E: EV=13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=40000 10000 1c00000000 0 0 81501f00002000 3809604001 2000000000000 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k71,80,8E,95,96,98,9B,A3,A4,A5,CD,E0,E1,E2,E3,E4,EC,EE,F0,F7,1A2,1A3,1A4,1D0,212,ram4,lsfw
E: MSC=10
E: NAME="Toshiba input device"
E: PHYS="toshiba_acpi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=15648
P: /devices/virtual/input/input10/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/virtual/input/input10/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=16699
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
P: /devices/virtual/input/input19
E: DEVPATH=/devices/virtual/input/input19
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=853955
P: /devices/virtual/input/input19/event17
N: input/event17
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/virtual/input/input19/event17
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=854100
E: XKBLAYOUT=gb
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.608131] Linux agpgart interface v0.103
[ 6.923382] [drm] Initialized drm 1.1.0 20060810
[ 10.153423] nouveau [ DRM] VRAM: 512 MiB
[ 10.153426] nouveau [ DRM] GART: 1048576 MiB
[ 10.153432] nouveau [ DRM] TMDS table version 2.0
[ 10.153435] nouveau [ DRM] DCB version 4.0
[ 10.153439] nouveau [ DRM] DCB outp 00: 010003f3 00010035
[ 10.153442] nouveau [ DRM] DCB outp 01: 02811300 00000000
[ 10.153446] nouveau [ DRM] DCB outp 02: 02822362 00020010
[ 10.153449] nouveau [ DRM] DCB outp 03: 01833310 00000000
[ 10.153452] nouveau [ DRM] DCB outp 04: 088443c6 0f220010
[ 10.153455] nouveau [ DRM] DCB outp 05: 08844382 00020010
[ 10.153457] nouveau [ DRM] DCB conn 00: 00000040
[ 10.153461] nouveau [ DRM] DCB conn 01: 00000100
[ 10.153464] nouveau [ DRM] DCB conn 02: 00001231
[ 10.153467] nouveau [ DRM] DCB conn 03: 00000351
[ 10.153469] nouveau [ DRM] DCB conn 04: 00202446
[ 10.153480] nouveau [ DRM] BIOS FP mode: 1600x900 (97790kHz pixel clock)
[ 10.184674] nouveau W[ DRM] unknown connector type 51
[ 10.184776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.184779] [drm] Driver supports precise vblank timestamp query.
[ 10.184783] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 10.224426] nouveau [ DRM] MM: using COPY for buffer copies
[ 10.319084] nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo ffff880037288400
[ 11.529254] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 795.426410] nouveau [ DRM] suspending display...
[ 795.426434] nouveau [ DRM] unpinning framebuffer(s)...
[ 795.426508] nouveau [ DRM] evicting buffers...
[ 795.860162] nouveau [ DRM] waiting for kernel channels to go idle...
[ 795.860186] nouveau [ DRM] suspending client object trees...
[ 795.860885] nouveau [ DRM] suspending kernel object tree...
[ 800.287321] nouveau [ DRM] re-enabling device...
[ 800.287336] nouveau [ DRM] resuming kernel object tree...
[ 800.562100] nouveau [ DRM] resuming client object trees...
[ 800.562434] nouveau [ DRM] resuming display...
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.14-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.19-10
ii libdrm-nouveau2 2.4.56-1
ii libdrm2 2.4.56-1
ii libudev1 208-8
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.0-1
Versions of packages xserver-xorg-video-nouveau recommends:
ii libgl1-mesa-dri 10.2.6-1
xserver-xorg-video-nouveau suggests no packages.
-- no debconf information
Reply to: