Bug#755877: Bad rerender in Gnome (sometimes i see strange shapes insead of right view)
Package: xserver-xorg-video-intel
Version: 2:2.21.15-2+b2
Severity: serious
Problem occurs sometimes, typical when must be refresh / redraw full sreen (switch view in gnome-shell), after unlock screen etc.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 28 2013 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2356320 Jul 18 00:25 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-4) ) #1 SMP Debian 3.14.12-1 (2014-07-11)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 8227 Feb 28 17:42 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 8227 Feb 28 17:42 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 38425 Mar 7 08:43 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 38791 May 1 17:22 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 45236 Jul 13 13:28 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 51503 Jul 23 22:53 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 21.349]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 21.349] X Protocol Version 11, Revision 0
[ 21.349] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[ 21.349] Current Operating System: Linux asus 3.14-1-amd64 #1 SMP Debian 3.14.9-1 (2014-06-30) x86_64
[ 21.349] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=566f9e50-43c2-4caa-b015-9af4c53a415b ro quiet
[ 21.349] Build Date: 15 April 2014 06:58:36PM
[ 21.349] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 21.349] Current version of pixman: 0.32.4
[ 21.349] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.349] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.349] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 23 11:19:42 2014
[ 21.417] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.472] (==) No Layout section. Using the first Screen section.
[ 21.472] (==) No screen section available. Using defaults.
[ 21.472] (**) |-->Screen "Default Screen Section" (0)
[ 21.472] (**) | |-->Monitor "<default monitor>"
[ 21.473] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.473] (==) Automatically adding devices
[ 21.473] (==) Automatically enabling devices
[ 21.473] (==) Automatically adding GPU devices
[ 21.512] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 21.512] Entry deleted from font path.
[ 21.529] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 21.529] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.529] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.529] (II) Loader magic: 0x7f0641236d40
[ 21.529] (II) Module ABI versions:
[ 21.529] X.Org ANSI C Emulation: 0.4
[ 21.529] X.Org Video Driver: 15.0
[ 21.529] X.Org XInput driver : 20.0
[ 21.529] X.Org Server Extension : 8.0
[ 21.530] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 21.531] (--) PCI:*(0:0:2:0) 8086:2772:1043:817a rev 2, Mem @ 0xdfe00000/524288, 0xe0000000/268435456, 0xdfe80000/262144, I/O @ 0x00008000/8
[ 21.531] Initializing built-in extension Generic Event Extension
[ 21.531] Initializing built-in extension SHAPE
[ 21.531] Initializing built-in extension MIT-SHM
[ 21.531] Initializing built-in extension XInputExtension
[ 21.531] Initializing built-in extension XTEST
[ 21.531] Initializing built-in extension BIG-REQUESTS
[ 21.531] Initializing built-in extension SYNC
[ 21.531] Initializing built-in extension XKEYBOARD
[ 21.532] Initializing built-in extension XC-MISC
[ 21.532] Initializing built-in extension SECURITY
[ 21.532] Initializing built-in extension XINERAMA
[ 21.532] Initializing built-in extension XFIXES
[ 21.532] Initializing built-in extension RENDER
[ 21.532] Initializing built-in extension RANDR
[ 21.532] Initializing built-in extension COMPOSITE
[ 21.532] Initializing built-in extension DAMAGE
[ 21.532] Initializing built-in extension MIT-SCREEN-SAVER
[ 21.532] Initializing built-in extension DOUBLE-BUFFER
[ 21.532] Initializing built-in extension RECORD
[ 21.532] Initializing built-in extension DPMS
[ 21.532] Initializing built-in extension Present
[ 21.532] Initializing built-in extension DRI3
[ 21.532] Initializing built-in extension X-Resource
[ 21.532] Initializing built-in extension XVideo
[ 21.532] Initializing built-in extension XVideo-MotionCompensation
[ 21.532] Initializing built-in extension SELinux
[ 21.532] Initializing built-in extension XFree86-VidModeExtension
[ 21.532] Initializing built-in extension XFree86-DGA
[ 21.532] Initializing built-in extension XFree86-DRI
[ 21.532] Initializing built-in extension DRI2
[ 21.532] (II) LoadModule: "glx"
[ 21.539] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.597] (II) Module glx: vendor="X.Org Foundation"
[ 21.597] compiled for 1.15.1, module version = 1.0.0
[ 21.598] ABI class: X.Org Server Extension, version 8.0
[ 21.598] (==) AIGLX enabled
[ 21.598] Loading extension GLX
[ 21.598] (==) Matched intel as autoconfigured driver 0
[ 21.598] (==) Matched intel as autoconfigured driver 1
[ 21.598] (==) Matched modesetting as autoconfigured driver 2
[ 21.598] (==) Matched fbdev as autoconfigured driver 3
[ 21.598] (==) Matched vesa as autoconfigured driver 4
[ 21.598] (==) Assigned the driver to the xf86ConfigLayout
[ 21.598] (II) LoadModule: "intel"
[ 21.598] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 21.687] (II) Module intel: vendor="X.Org Foundation"
[ 21.687] compiled for 1.15.0, module version = 2.21.15
[ 21.687] Module class: X.Org Video Driver
[ 21.687] ABI class: X.Org Video Driver, version 15.0
[ 21.687] (II) LoadModule: "modesetting"
[ 21.687] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 21.703] (II) Module modesetting: vendor="X.Org Foundation"
[ 21.703] compiled for 1.15.1, module version = 0.9.0
[ 21.703] Module class: X.Org Video Driver
[ 21.703] ABI class: X.Org Video Driver, version 15.0
[ 21.703] (II) LoadModule: "fbdev"
[ 21.704] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 21.719] (II) Module fbdev: vendor="X.Org Foundation"
[ 21.719] compiled for 1.15.0, module version = 0.4.4
[ 21.719] Module class: X.Org Video Driver
[ 21.719] ABI class: X.Org Video Driver, version 15.0
[ 21.719] (II) LoadModule: "vesa"
[ 21.719] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 21.730] (II) Module vesa: vendor="X.Org Foundation"
[ 21.730] compiled for 1.15.0, module version = 2.3.3
[ 21.730] Module class: X.Org Video Driver
[ 21.730] ABI class: X.Org Video Driver, version 15.0
[ 21.730] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 21.731] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 21.731] (II) FBDEV: driver for framebuffer: fbdev
[ 21.731] (II) VESA: driver for VESA chipsets: vesa
[ 21.731] (++) using VT number 7
[ 21.742] (WW) Falling back to old probe method for modesetting
[ 21.742] (WW) Falling back to old probe method for fbdev
[ 21.742] (II) Loading sub module "fbdevhw"
[ 21.742] (II) LoadModule: "fbdevhw"
[ 21.743] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 21.763] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 21.763] compiled for 1.15.1, module version = 0.0.2
[ 21.763] ABI class: X.Org Video Driver, version 15.0
[ 21.763] (WW) Falling back to old probe method for vesa
[ 21.763] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.763] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 21.763] (==) intel(0): RGB weight 888
[ 21.763] (==) intel(0): Default visual is TrueColor
[ 21.763] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[ 21.763] (**) intel(0): Relaxed fencing disabled
[ 21.765] (**) intel(0): Wait on SwapBuffers? enabled
[ 21.765] (**) intel(0): Triple buffering? enabled
[ 21.765] (**) intel(0): Framebuffer tiled
[ 21.765] (**) intel(0): Pixmaps tiled
[ 21.765] (**) intel(0): 3D buffers tiled
[ 21.765] (**) intel(0): SwapBuffers wait enabled
[ 21.765] (==) intel(0): video overlay key set to 0x101fe
[ 21.864] (II) intel(0): Output VGA1 has no monitor section
[ 21.964] (II) intel(0): EDID for output VGA1
[ 21.964] (II) intel(0): Manufacturer: ACR Model: 350 Serial#: 1077952479
[ 21.964] (II) intel(0): Year: 2014 Week: 4
[ 21.964] (II) intel(0): EDID Version: 1.3
[ 21.964] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 21.964] (II) intel(0): Sync: Separate
[ 21.964] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 21.964] (II) intel(0): Gamma: 2.20
[ 21.964] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 21.964] (II) intel(0): First detailed timing is preferred mode
[ 21.964] (II) intel(0): redX: 0.651 redY: 0.338 greenX: 0.321 greenY: 0.614
[ 21.964] (II) intel(0): blueX: 0.154 blueY: 0.063 whiteX: 0.313 whiteY: 0.329
[ 21.964] (II) intel(0): Supported established timings:
[ 21.964] (II) intel(0): 720x400@70Hz
[ 21.964] (II) intel(0): 640x480@60Hz
[ 21.964] (II) intel(0): 640x480@67Hz
[ 21.964] (II) intel(0): 800x600@56Hz
[ 21.964] (II) intel(0): 800x600@60Hz
[ 21.964] (II) intel(0): 1024x768@60Hz
[ 21.964] (II) intel(0): 1024x768@70Hz
[ 21.964] (II) intel(0): Manufacturer's mask: 0
[ 21.964] (II) intel(0): Supported standard timings:
[ 21.964] (II) intel(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 21.964] (II) intel(0): #1: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 21.964] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 21.964] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 21.964] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 21.964] (II) intel(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 21.964] (II) intel(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 21.964] (II) intel(0): Supported detailed timing:
[ 21.964] (II) intel(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 21.964] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 21.964] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 21.964] (II) intel(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 21.964] (II) intel(0): Serial No: LYWEE0054210
[ 21.964] (II) intel(0): Monitor name: Acer V236HL
[ 21.964] (II) intel(0): EDID (in hex):
[ 21.964] (II) intel(0): 00ffffffffffff0004725003df3f4040
[ 21.964] (II) intel(0): 0418010368331d782ae595a656529d27
[ 21.964] (II) intel(0): 105054b30c00d1c0b300950081808100
[ 21.964] (II) intel(0): 81c0714f0101023a801871382d40582c
[ 21.965] (II) intel(0): 4500fd1e1100001e000000fd00374c1e
[ 21.965] (II) intel(0): 5311000a202020202020000000ff004c
[ 21.965] (II) intel(0): 59574545303035343231300a000000fc
[ 21.965] (II) intel(0): 00416365722056323336484c0a2000ce
[ 21.965] (II) intel(0): Printing probed modes for output VGA1
[ 21.965] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 21.965] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 21.965] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 21.965] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 21.965] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 21.965] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 21.965] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 21.965] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 21.965] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.965] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.965] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.965] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 21.965] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 21.965] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 21.965] (II) intel(0): Output VGA1 connected
[ 21.965] (II) intel(0): Using exact sizes for initial modes
[ 21.965] (II) intel(0): Output VGA1 using initial mode 1920x1080
[ 21.965] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.965] (II) intel(0): Kernel page flipping support detected, enabling
[ 21.965] (==) intel(0): DPI set to (96, 96)
[ 21.965] (II) Loading sub module "fb"
[ 21.965] (II) LoadModule: "fb"
[ 21.965] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.003] (II) Module fb: vendor="X.Org Foundation"
[ 22.003] compiled for 1.15.1, module version = 1.0.0
[ 22.003] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.003] (II) Loading sub module "dri2"
[ 22.003] (II) LoadModule: "dri2"
[ 22.003] (II) Module "dri2" already built-in
[ 22.003] (II) UnloadModule: "modesetting"
[ 22.003] (II) Unloading modesetting
[ 22.003] (II) UnloadModule: "fbdev"
[ 22.003] (II) Unloading fbdev
[ 22.003] (II) UnloadSubModule: "fbdevhw"
[ 22.003] (II) Unloading fbdevhw
[ 22.004] (II) UnloadModule: "vesa"
[ 22.004] (II) Unloading vesa
[ 22.004] (==) Depth 24 pixmap format is 32 bpp
[ 22.004] (II) intel(0): [DRI2] Setup complete
[ 22.005] (II) intel(0): [DRI2] DRI driver: i915
[ 22.005] (II) intel(0): Allocated new frame buffer 1920x1080 stride 8192, tiled
[ 22.016] (II) UXA(0): Driver registered support for the following operations:
[ 22.017] (II) solid
[ 22.017] (II) copy
[ 22.017] (II) composite (RENDER acceleration)
[ 22.017] (II) put_image
[ 22.017] (II) get_image
[ 22.017] (==) intel(0): Backing store enabled
[ 22.017] (==) intel(0): Silken mouse enabled
[ 22.035] (II) intel(0): Initializing HW Cursor
[ 22.035] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.039] (==) intel(0): DPMS enabled
[ 22.039] (==) intel(0): Intel XvMC decoder disabled
[ 22.039] (II) intel(0): Set up textured video
[ 22.039] (II) intel(0): Set up overlay video
[ 22.039] (II) intel(0): direct rendering: DRI2 Enabled
[ 22.039] (==) intel(0): hotplug detection: "enabled"
[ 22.080] (--) RandR disabled
[ 22.089] (II) SELinux: Disabled on system
[ 22.419] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 22.419] (II) AIGLX: enabled GLX_ARB_create_context
[ 22.419] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 22.419] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 22.419] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 22.419] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 22.419] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 22.419] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 22.419] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 22.420] (II) AIGLX: Loaded and initialized i915
[ 22.420] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 22.420] (II) intel(0): Setting screen physical size to 508 x 285
[ 23.326] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 23.326] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.326] (II) LoadModule: "evdev"
[ 23.345] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.377] (II) Module evdev: vendor="X.Org Foundation"
[ 23.377] compiled for 1.15.0, module version = 2.8.2
[ 23.377] Module class: X.Org XInput Driver
[ 23.377] ABI class: X.Org XInput driver, version 20.0
[ 23.377] (II) Using input driver 'evdev' for 'Power Button'
[ 23.377] (**) Power Button: always reports core events
[ 23.377] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 23.378] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.378] (--) evdev: Power Button: Found keys
[ 23.378] (II) evdev: Power Button: Configuring as keyboard
[ 23.378] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 23.378] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.378] (**) Option "xkb_rules" "evdev"
[ 23.378] (**) Option "xkb_model" "pc105"
[ 23.378] (**) Option "xkb_layout" "cz"
[ 23.437] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 23.437] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.437] (II) Using input driver 'evdev' for 'Power Button'
[ 23.437] (**) Power Button: always reports core events
[ 23.437] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 23.437] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.437] (--) evdev: Power Button: Found keys
[ 23.437] (II) evdev: Power Button: Configuring as keyboard
[ 23.437] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event4"
[ 23.437] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 23.437] (**) Option "xkb_rules" "evdev"
[ 23.437] (**) Option "xkb_model" "pc105"
[ 23.437] (**) Option "xkb_layout" "cz"
[ 23.438] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 23.438] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 23.438] (II) No input driver specified, ignoring this device.
[ 23.438] (II) This device may have been added with another device file.
[ 23.439] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event10)
[ 23.439] (II) No input driver specified, ignoring this device.
[ 23.439] (II) This device may have been added with another device file.
[ 23.439] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 23.439] (II) No input driver specified, ignoring this device.
[ 23.439] (II) This device may have been added with another device file.
[ 23.439] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event8)
[ 23.439] (II) No input driver specified, ignoring this device.
[ 23.439] (II) This device may have been added with another device file.
[ 23.440] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/event0)
[ 23.440] (**) USB USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.440] (II) Using input driver 'evdev' for 'USB USB Keyboard'
[ 23.440] (**) USB USB Keyboard: always reports core events
[ 23.440] (**) evdev: USB USB Keyboard: Device: "/dev/input/event0"
[ 23.440] (--) evdev: USB USB Keyboard: Vendor 0x1a2c Product 0xc21
[ 23.440] (--) evdev: USB USB Keyboard: Found keys
[ 23.440] (II) evdev: USB USB Keyboard: Configuring as keyboard
[ 23.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:1A2C:0C21.0001/input/input2/event0"
[ 23.440] (II) XINPUT: Adding extended input device "USB USB Keyboard" (type: KEYBOARD, id 8)
[ 23.440] (**) Option "xkb_rules" "evdev"
[ 23.440] (**) Option "xkb_model" "pc105"
[ 23.440] (**) Option "xkb_layout" "cz"
[ 23.441] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/event1)
[ 23.441] (**) USB USB Keyboard: Applying InputClass "evdev pointer catchall"
[ 23.441] (**) USB USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.441] (II) Using input driver 'evdev' for 'USB USB Keyboard'
[ 23.441] (**) USB USB Keyboard: always reports core events
[ 23.441] (**) evdev: USB USB Keyboard: Device: "/dev/input/event1"
[ 23.441] (--) evdev: USB USB Keyboard: Vendor 0x1a2c Product 0xc21
[ 23.442] (--) evdev: USB USB Keyboard: Found 3 mouse buttons
[ 23.442] (--) evdev: USB USB Keyboard: Found scroll wheel(s)
[ 23.442] (--) evdev: USB USB Keyboard: Found relative axes
[ 23.442] (--) evdev: USB USB Keyboard: Found x and y relative axes
[ 23.442] (--) evdev: USB USB Keyboard: Found absolute axes
[ 23.442] (II) evdev: USB USB Keyboard: Forcing absolute x/y axes to exist.
[ 23.442] (--) evdev: USB USB Keyboard: Found keys
[ 23.442] (II) evdev: USB USB Keyboard: Configuring as mouse
[ 23.442] (II) evdev: USB USB Keyboard: Configuring as keyboard
[ 23.442] (II) evdev: USB USB Keyboard: Adding scrollwheel support
[ 23.442] (**) evdev: USB USB Keyboard: YAxisMapping: buttons 4 and 5
[ 23.442] (**) evdev: USB USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.442] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C21.0002/input/input3/event1"
[ 23.442] (II) XINPUT: Adding extended input device "USB USB Keyboard" (type: KEYBOARD, id 9)
[ 23.442] (**) Option "xkb_rules" "evdev"
[ 23.442] (**) Option "xkb_model" "pc105"
[ 23.442] (**) Option "xkb_layout" "cz"
[ 23.442] (II) evdev: USB USB Keyboard: initialized for relative axes.
[ 23.442] (WW) evdev: USB USB Keyboard: ignoring absolute axes.
[ 23.442] (**) USB USB Keyboard: (accel) keeping acceleration scheme 1
[ 23.443] (**) USB USB Keyboard: (accel) acceleration profile 0
[ 23.443] (**) USB USB Keyboard: (accel) acceleration factor: 2.000
[ 23.443] (**) USB USB Keyboard: (accel) acceleration threshold: 4
[ 23.443] (II) config/udev: Adding input device USB USB Keyboard (/dev/input/mouse0)
[ 23.443] (II) No input driver specified, ignoring this device.
[ 23.443] (II) This device may have been added with another device file.
[ 23.444] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 23.444] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 23.444] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 23.444] (**) Logitech USB Receiver: always reports core events
[ 23.444] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 23.444] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 23.444] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 23.444] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 23.444] (--) evdev: Logitech USB Receiver: Found relative axes
[ 23.444] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 23.444] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 23.444] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 23.444] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 23.444] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.444] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input4/event2"
[ 23.444] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 23.444] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 23.445] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 23.445] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 23.445] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 23.445] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 23.445] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 23.445] (II) No input driver specified, ignoring this device.
[ 23.445] (II) This device may have been added with another device file.
[ 23.446] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 23.446] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 23.446] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 23.446] (**) Logitech USB Receiver: always reports core events
[ 23.446] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 23.446] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 23.446] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 23.446] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 23.446] (--) evdev: Logitech USB Receiver: Found relative axes
[ 23.446] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 23.446] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 23.446] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 23.446] (--) evdev: Logitech USB Receiver: Found keys
[ 23.446] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 23.446] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 23.446] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 23.446] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 23.446] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0004/input/input5/event3"
[ 23.446] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 23.446] (**) Option "xkb_rules" "evdev"
[ 23.446] (**) Option "xkb_model" "pc105"
[ 23.446] (**) Option "xkb_layout" "cz"
[ 23.446] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 23.447] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 23.447] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 23.447] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 23.447] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 23.447] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 23.448] (II) config/udev: Adding input device WALTOP Tablet (/dev/input/event11)
[ 23.448] (**) WALTOP Tablet : Applying InputClass "evdev tablet catchall"
[ 23.448] (**) WALTOP Tablet : Applying InputClass "Waltop class"
[ 23.448] (II) LoadModule: "wacom"
[ 23.448] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 23.469] (II) Module wacom: vendor="X.Org Foundation"
[ 23.469] compiled for 1.15.0, module version = 0.23.0
[ 23.469] Module class: X.Org XInput Driver
[ 23.469] ABI class: X.Org XInput driver, version 20.0
[ 23.469] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus 0x9F,
TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
TabletPC 0x101, TabletPC 0x10D, TabletPC 0x4001, usb:172f:0024,
usb:172f:0025, usb:172f:0026, usb:172f:0027, usb:172f:0028,
usb:172f:0030, usb:172f:0031, usb:172f:0032, usb:172f:0033,
usb:172f:0034, usb:172f:0035, usb:172f:0036, usb:172f:0037,
usb:172f:0038, usb:172f:0039, usb:172f:0051, usb:172f:0052,
usb:172f:0053, usb:172f:0054, usb:172f:0055, usb:172f:0056,
usb:172f:0057, usb:172f:0058, usb:172f:0500, usb:172f:0501,
usb:172f:0502, usb:172f:0503, usb:1b96:0001, usb:17ef:6004
[ 23.471] (II) Using input driver 'wacom' for ' WALTOP Tablet '
[ 23.472] (**) WALTOP Tablet : always reports core events
[ 23.472] (**) Option "Device" "/dev/input/event11"
[ 23.472] (II) WALTOP Tablet : type not specified, assuming 'stylus'.
[ 23.472] (II) WALTOP Tablet : other types will be automatically added.
[ 23.472] (--) WALTOP Tablet stylus: using pressure threshold of 27 for button 1
[ 23.472] (--) WALTOP Tablet stylus: maxX=17920 maxY=10752 maxZ=1023 resX=81000 resY=81000 tilt=disabled
[ 23.472] (II) WALTOP Tablet stylus: hotplugging dependent devices.
[ 23.472] (EE) WALTOP Tablet stylus: Invalid type 'eraser' for this device.
[ 23.472] (EE) WALTOP Tablet stylus: Invalid type 'cursor' for this device.
[ 23.472] (EE) WALTOP Tablet stylus: Invalid type 'touch' for this device.
[ 23.472] (EE) WALTOP Tablet stylus: Invalid type 'pad' for this device.
[ 23.472] (II) WALTOP Tablet stylus: hotplugging completed.
[ 23.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:172F:0038.0005/input/input14/event11"
[ 23.473] (II) XINPUT: Adding extended input device " WALTOP Tablet stylus" (type: STYLUS, id 12)
[ 23.474] (**) WALTOP Tablet stylus: (accel) keeping acceleration scheme 1
[ 23.474] (**) WALTOP Tablet stylus: (accel) acceleration profile 0
[ 23.474] (**) WALTOP Tablet stylus: (accel) acceleration factor: 2.000
[ 23.474] (**) WALTOP Tablet stylus: (accel) acceleration threshold: 4
[ 23.475] (II) config/udev: Adding input device WALTOP Tablet (/dev/input/mouse2)
[ 23.475] (II) No input driver specified, ignoring this device.
[ 23.475] (II) This device may have been added with another device file.
[ 23.475] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 23.475] (II) No input driver specified, ignoring this device.
[ 23.475] (II) This device may have been added with another device file.
[ 29.628] (II) intel(0): EDID vendor "ACR", prod id 848
[ 29.628] (II) intel(0): Using EDID range info for horizontal sync
[ 29.628] (II) intel(0): Using EDID range info for vertical refresh
[ 29.628] (II) intel(0): Printing DDC gathered Modelines:
[ 29.628] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 29.628] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.628] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29.628] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 29.628] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29.628] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29.628] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 29.628] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.628] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 29.628] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 29.628] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 29.628] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 29.628] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 29.628] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 29.628] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 33.404] (II) intel(0): EDID vendor "ACR", prod id 848
[ 33.404] (II) intel(0): Using hsync ranges from config file
[ 33.404] (II) intel(0): Using vrefresh ranges from config file
[ 33.404] (II) intel(0): Printing DDC gathered Modelines:
[ 33.404] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 33.404] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.404] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33.404] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 33.404] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.404] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 33.404] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 33.404] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.404] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 33.404] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 33.404] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 33.404] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33.404] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 33.404] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 33.404] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 33.908] (II) intel(0): EDID vendor "ACR", prod id 848
[ 33.908] (II) intel(0): Using hsync ranges from config file
[ 33.908] (II) intel(0): Using vrefresh ranges from config file
[ 33.908] (II) intel(0): Printing DDC gathered Modelines:
[ 33.908] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 33.908] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.908] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 33.908] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 33.908] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.908] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 33.908] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 33.908] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.908] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 33.908] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 33.908] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 33.908] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33.908] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 33.908] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 33.908] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 114.200] (II) intel(0): EDID vendor "ACR", prod id 848
[ 114.200] (II) intel(0): Using hsync ranges from config file
[ 114.200] (II) intel(0): Using vrefresh ranges from config file
[ 114.200] (II) intel(0): Printing DDC gathered Modelines:
[ 114.200] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 114.200] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 114.200] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 114.200] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 114.200] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 114.200] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 114.200] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 114.200] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 114.200] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 114.200] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 114.200] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 114.200] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 114.200] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 114.200] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 114.200] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 117.804] (II) intel(0): EDID vendor "ACR", prod id 848
[ 117.804] (II) intel(0): Using hsync ranges from config file
[ 117.804] (II) intel(0): Using vrefresh ranges from config file
[ 117.804] (II) intel(0): Printing DDC gathered Modelines:
[ 117.804] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 117.804] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 117.804] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 117.804] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 117.804] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 117.804] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 117.804] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 117.804] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 117.804] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 117.804] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 117.804] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 117.804] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 117.804] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 117.804] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 117.804] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 123.724] (II) intel(0): EDID vendor "ACR", prod id 848
[ 123.724] (II) intel(0): Using hsync ranges from config file
[ 123.724] (II) intel(0): Using vrefresh ranges from config file
[ 123.724] (II) intel(0): Printing DDC gathered Modelines:
[ 123.724] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 123.724] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 123.724] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 123.724] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 123.724] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 123.724] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 123.724] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 123.724] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 123.724] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 123.724] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 123.724] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 123.724] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 123.724] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 123.724] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 123.724] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 127.036] (II) intel(0): EDID vendor "ACR", prod id 848
[ 127.036] (II) intel(0): Using hsync ranges from config file
[ 127.036] (II) intel(0): Using vrefresh ranges from config file
[ 127.036] (II) intel(0): Printing DDC gathered Modelines:
[ 127.036] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 127.036] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 127.036] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 127.036] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 127.036] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 127.036] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 127.036] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 127.036] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 127.036] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 127.036] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 127.036] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 127.036] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 127.036] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 127.036] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 127.036] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10597.788] (II) intel(0): EDID vendor "ACR", prod id 848
[ 10597.788] (II) intel(0): Using hsync ranges from config file
[ 10597.788] (II) intel(0): Using vrefresh ranges from config file
[ 10597.788] (II) intel(0): Printing DDC gathered Modelines:
[ 10597.788] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 10597.788] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10597.788] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10597.788] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10597.788] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10597.788] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10597.788] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10597.788] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10597.788] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 10597.788] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 10597.788] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 10597.788] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10597.788] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 10597.788] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 10597.788] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10607.176] (II) intel(0): EDID vendor "ACR", prod id 848
[ 10607.176] (II) intel(0): Using hsync ranges from config file
[ 10607.176] (II) intel(0): Using vrefresh ranges from config file
[ 10607.176] (II) intel(0): Printing DDC gathered Modelines:
[ 10607.176] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 10607.176] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10607.176] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10607.176] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10607.176] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10607.176] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10607.176] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10607.176] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10607.176] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 10607.176] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 10607.176] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 10607.176] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10607.176] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 10607.176] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 10607.176] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 41644.126] (II) UnloadModule: "wacom"
[ 41644.212] (II) evdev: Logitech USB Receiver: Close
[ 41644.255] (II) UnloadModule: "evdev"
[ 41644.255] (II) evdev: Logitech USB Receiver: Close
[ 41644.256] (II) UnloadModule: "evdev"
[ 41644.276] (II) evdev: USB USB Keyboard: Close
[ 41644.276] (II) UnloadModule: "evdev"
[ 41644.276] (II) evdev: USB USB Keyboard: Close
[ 41644.290] (II) UnloadModule: "evdev"
[ 41644.290] (II) evdev: Power Button: Close
[ 41644.339] (II) UnloadModule: "evdev"
[ 41644.339] (II) evdev: Power Button: Close
[ 41644.339] (II) UnloadModule: "evdev"
[ 41645.747] (EE) Server terminated successfully (0). Closing log file.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=84862
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=99051
E: XKBLAYOUT=cz
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=83227
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=98885
E: XKBLAYOUT=cz
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/input/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0883e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/883/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1284
P: /devices/pci0000:00/0000:00:1b.0/input/input8/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=99217
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD,
E: NAME="HDA Intel Line"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=2000
E: TAGS=:seat:
E: USEC_INITIALIZED=16182
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9942
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel Line Out"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=13742
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=439
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Rear Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=18008
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=11855
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:1A2C:0C21.0001/input/input2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:1A2C:0C21.0001/input/input2
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0c21
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=0110
E: ID_SERIAL=USB_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=USB
E: ID_VENDOR_ENC=USB
E: ID_VENDOR_ID=1a2c
E: KEY=1000000000007 ff800000000007ff febeffdff3cfffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0003v1A2Cp0C21e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="USB USB Keyboard"
E: PHYS="usb-0000:00:1d.0-1/input0"
E: PRODUCT=3/1a2c/c21/110
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=88171
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:1A2C:0C21.0001/input/input2/event0
N: input/event0
S: input/by-id/usb-USB_USB_Keyboard-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-USB_USB_Keyboard-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:1A2C:0C21.0001/input/input2/event0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0c21
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_0
E: ID_REVISION=0110
E: ID_SERIAL=USB_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=USB
E: ID_VENDOR_ENC=USB
E: ID_VENDOR_ID=1a2c
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=97749
E: XKBLAYOUT=cz
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C21.0002/input/input3
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C21.0002/input/input3
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_1_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0c21
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=0110
E: ID_SERIAL=USB_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=USB
E: ID_VENDOR_ENC=USB
E: ID_VENDOR_ID=1a2c
E: KEY=4837fff072ff32d bf54444600000000 70001 20c100b17c000 267bfad941dfed 9e168000004400 10000002
E: MODALIAS=input:b0003v1A2Cp0C21e0110-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B1,B2,B5,CE,CF,D0,D1,D2,D4,D8,D9,DB,E4,EA,EB,F1,100,110,111,112,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r0,1,6,8,a20,m4,lsfw
E: MSC=10
E: NAME="USB USB Keyboard"
E: PHYS="usb-0000:00:1d.0-1/input1"
E: PRODUCT=3/1a2c/c21/110
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=88748
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C21.0002/input/input3/event1
N: input/event1
S: input/by-id/usb-USB_USB_Keyboard-if01-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-USB_USB_Keyboard-if01-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C21.0002/input/input3/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0c21
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=0110
E: ID_SERIAL=USB_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=USB
E: ID_VENDOR_ENC=USB
E: ID_VENDOR_ID=1a2c
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=98057
E: XKBLAYOUT=cz
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C21.0002/input/input3/mouse0
N: input/mouse0
S: input/by-id/usb-USB_USB_Keyboard-if01-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse
E: DEVLINKS=/dev/input/by-id/usb-USB_USB_Keyboard-if01-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:1A2C:0C21.0002/input/input3/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0c21
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_1_1
E: ID_REVISION=0110
E: ID_SERIAL=USB_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=USB
E: ID_VENDOR_ENC=USB
E: ID_VENDOR_ID=1a2c
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=88908
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input4
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input4
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0
E: ID_REVISION=2201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046DpC52Fe0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.0-2/input0"
E: PRODUCT=3/46d/c52f/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=82922
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input4/event2
N: input/event2
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input4/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0
E: ID_REVISION=2201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=98316
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input4/mouse1
N: input/mouse1
S: input/by-id/usb-Logitech_USB_Receiver-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input4/mouse1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0
E: ID_REVISION=2201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=82944
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0004/input/input5
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0004/input/input5
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_2_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_1
E: ID_REVISION=2201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=4837fff072ff32d bf54444600000000 1 20f908b17c000 677bfad9415fed 9ed68000004400 10000002
E: MODALIAS=input:b0003v046DpC52Fe0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E4,E7,E8,E9,EA,EB,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.0-2/input1"
E: PRODUCT=3/46d/c52f/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=87418
P: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0004/input/input5/event3
N: input/event3
S: input/by-id/usb-Logitech_USB_Receiver-event-if01
S: input/by-path/pci-0000:00:1d.0-usb-0:2:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-if01 /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.1-event
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0004/input/input5/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52f
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_1
E: ID_REVISION=2201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=98700
E: XKBLAYOUT=cz
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:172F:0038.0005/input/input14
E: ABS=1000003
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:172F:0038.0005/input/input14
E: EV=1b
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_1-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=Tablet
E: ID_MODEL_ENC=\x20\x20\x20\x20\x20\x20\x20\x20\x20Tablet\x20\x20\x20\x20
E: ID_MODEL_ID=0038
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0102
E: ID_SERIAL=WALTOP_Tablet
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=WALTOP
E: ID_VENDOR_ENC=\x20\x20\x20\x20\x20\x20\x20\x20\x20WALTOP\x20\x20\x20
E: ID_VENDOR_ID=172f
E: KEY=1c01 0 0 0 0 0
E: MODALIAS=input:b0003v172Fp0038e0110-e0,1,3,4,k140,14A,14B,14C,ra0,1,18,m4,lsfw
E: MSC=10
E: NAME=" WALTOP Tablet "
E: PHYS="usb-0000:00:1d.1-1/input0"
E: PRODUCT=3/172f/38/110
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=93570
P: /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:172F:0038.0005/input/input14/event11
N: input/event11
S: input/by-id/usb-WALTOP_Tablet-event-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-WALTOP_Tablet-event-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:172F:0038.0005/input/input14/event11
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=Tablet
E: ID_MODEL_ENC=\x20\x20\x20\x20\x20\x20\x20\x20\x20Tablet\x20\x20\x20\x20
E: ID_MODEL_ID=0038
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0102
E: ID_SERIAL=WALTOP_Tablet
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=WALTOP
E: ID_VENDOR_ENC=\x20\x20\x20\x20\x20\x20\x20\x20\x20WALTOP\x20\x20\x20
E: ID_VENDOR_ID=172f
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=93782
P: /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:172F:0038.0005/input/input14/mouse2
N: input/mouse2
S: input/by-id/usb-WALTOP_Tablet-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-WALTOP_Tablet-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:172F:0038.0005/input/input14/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_MODEL=Tablet
E: ID_MODEL_ENC=\x20\x20\x20\x20\x20\x20\x20\x20\x20Tablet\x20\x20\x20\x20
E: ID_MODEL_ID=0038
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0102
E: ID_SERIAL=WALTOP_Tablet
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=WALTOP
E: ID_VENDOR_ENC=\x20\x20\x20\x20\x20\x20\x20\x20\x20WALTOP\x20\x20\x20
E: ID_VENDOR_ID=172f
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=93688
P: /devices/platform/pcspkr/input/input13
E: DEVPATH=/devices/platform/pcspkr/input/input13
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=76333
P: /devices/platform/pcspkr/input/input13/event10
N: input/event10
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/platform/pcspkr/input/input13/event10
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=13322
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.508856] Linux agpgart interface v0.103
[ 0.508919] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 0.508981] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.509090] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.509239] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 8.287695] [drm] Initialized drm 1.1.0 20060810
[ 8.333079] [drm] Memory usable by graphics device = 256M
[ 8.364917] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.364924] [drm] Driver supports precise vblank timestamp query.
[ 8.376137] [drm] initialized overlay support
[ 8.535813] fbcon: inteldrmfb (fb0) is primary device
[ 8.591959] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.591994] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.14-1-amd64 (SMP w/1 CPU core)
Locale: LANG=cs_CZ.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.19-7
ii libdrm-intel1 2.4.54-1
ii libdrm2 2.4.54-1
ii libpciaccess0 0.13.2-3
ii libpixman-1-0 0.32.6-1
ii libudev1 208-6
ii libx11-6 2:1.6.2-2
ii libx11-xcb1 2:1.6.2-2
ii libxcb-dri2-0 1.10-3
ii libxcb-util0 0.3.8-2
ii libxcb1 1.10-3
ii libxv1 2:1.0.10-1
ii libxvmc1 2:1.0.8-2
ii xserver-xorg-core [xorg-video-abi-18] 2:1.16.0-1
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: