Bug#749150: Xorg + xinput (Segmentation fault) on testing
Package: xserver-xorg
Version: 1:7.7+7
Severity: important
File: xorg
Hello,
When I use xinput 1.6.1, (XI version on server 2.3) on gnome version 3.8.4 on
testing (3.14-1-686-pae #1 SMP Debian 3.14.4-1 (2014-05-13) i686 GNU/Linux)
I have a Segmentation fault ( Xorg crash) when I move the second mouse pointer
created with xinput.
To debug the problem I tried to generate a core file in enable the mode verbose
log in /etc/gdm3/daemon.conf but when the server crash no core file is generate
in /etc/X11/
For information on the current stable version xinput + gnome works well
(installed + tested on virtualbox).
Thks in advance,
Topher
Below my Xorg.log
[ 40.369]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 40.370] X Protocol Version 11, Revision 0
[ 40.370] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 40.370] Current Operating System: Linux Dexter 3.14-1-686-pae #1 SMP
Debian
3.14.4-1 (2014-05-13) i686
[ 40.370] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae
root=U
UID=cff90031-f660-49c4-88b7-80620f940cdb ro splash quiet
[ 40.370] Build Date: 15 April 2014 07:46:36PM
[ 40.370] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 40.370] Current version of pixman: 0.32.4
[ 40.370] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 40.370] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 40.370] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 24 16:06:29
201
4
[ 40.502] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 40.611] (==) No Layout section. Using the first Screen section.
[ 40.611] (==) No screen section available. Using defaults.
[ 40.611] (**) |-->Screen "Default Screen Section" (0)
[ 40.611] (**) | |-->Monitor "<default monitor>"
[ 40.640] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 40.640] (==) Automatically adding devices
[ 40.640] (==) Automatically enabling devices
[ 40.640] (==) Automatically adding GPU devices
[ 40.840] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 40.840] Entry deleted from font path.
[ 40.933] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 40.933] Entry deleted from font path.
[ 40.995] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 40.995] Entry deleted from font path.
[ 40.995] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 40.995] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 40.995] (II) The server relies on udev to provide the list of input
devices
..
If no devices become available, reconfigure udev or disable
AutoAddDevic
es.
[ 40.995] (II) Loader magic: 0xb77cb6c0
[ 40.995] (II) Module ABI versions:
[ 40.995] X.Org ANSI C Emulation: 0.4
[ 40.995] X.Org Video Driver: 15.0
[ 40.995] X.Org XInput driver : 20.0
[ 40.995] X.Org Server Extension : 8.0
[ 40.995] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 40.997] (--) PCI:*(0:0:2:0) 8086:2a02:104d:9008 rev 12, Mem @
0xfc000000/10
48576, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 40.997] (--) PCI: (0:0:2:1) 8086:2a03:104d:9008 rev 12, Mem @
0xfc100000/10
48576
[ 41.023] Initializing built-in extension Generic Event Extension
[ 41.023] Initializing built-in extension SHAPE
[ 41.023] Initializing built-in extension MIT-SHM
[ 41.023] Initializing built-in extension XInputExtension
[ 41.024] Initializing built-in extension XTEST
[ 41.024] Initializing built-in extension BIG-REQUESTS
[ 41.024] Initializing built-in extension SYNC
[ 41.024] Initializing built-in extension XKEYBOARD
[ 41.024] Initializing built-in extension XC-MISC
[ 41.024] Initializing built-in extension SECURITY
[ 41.024] Initializing built-in extension XINERAMA
[ 41.024] Initializing built-in extension XFIXES
[ 41.024] Initializing built-in extension RENDER
[ 41.024] Initializing built-in extension RANDR
[ 41.024] Initializing built-in extension COMPOSITE
[ 41.024] Initializing built-in extension DAMAGE
[ 41.024] Initializing built-in extension MIT-SCREEN-SAVER
[ 41.024] Initializing built-in extension DOUBLE-BUFFER
[ 41.024] Initializing built-in extension RECORD
[ 41.024] Initializing built-in extension DPMS
[ 41.024] Initializing built-in extension Present
[ 41.024] Initializing built-in extension DRI3
[ 41.024] Initializing built-in extension X-Resource
[ 41.024] Initializing built-in extension XVideo
[ 41.024] Initializing built-in extension XVideo-MotionCompensation
[ 41.024] Initializing built-in extension SELinux
[ 41.024] Initializing built-in extension XFree86-VidModeExtension
[ 41.024] Initializing built-in extension XFree86-DGA
[ 41.024] Initializing built-in extension XFree86-DRI
[ 41.024] Initializing built-in extension DRI2
[ 41.024] (II) LoadModule: "glx"
[ 41.128] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41.295] (II) Module glx: vendor="X.Org Foundation"
[ 41.295] compiled for 1.15.1, module version = 1.0.0
[ 41.295] ABI class: X.Org Server Extension, version 8.0
[ 41.295] (==) AIGLX enabled
[ 41.295] Loading extension GLX
[ 41.295] (==) Matched intel as autoconfigured driver 0
[ 41.295] (==) Matched intel as autoconfigured driver 1
[ 41.295] (==) Matched modesetting as autoconfigured driver 2
[ 41.295] (==) Matched fbdev as autoconfigured driver 3
[ 41.295] (==) Matched vesa as autoconfigured driver 4
[ 41.295] (==) Assigned the driver to the xf86ConfigLayout
[ 41.295] (II) LoadModule: "intel"
[ 41.319] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 41.567] (II) Module intel: vendor="X.Org Foundation"
[ 41.567] compiled for 1.15.0, module version = 2.21.15
[ 41.567] Module class: X.Org Video Driver
[ 41.567] ABI class: X.Org Video Driver, version 15.0
[ 41.567] (II) LoadModule: "modesetting"
[ 41.567] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 41.632] (II) Module modesetting: vendor="X.Org Foundation"
[ 41.632] compiled for 1.15.1, module version = 0.8.1
[ 41.632] Module class: X.Org Video Driver
[ 41.632] ABI class: X.Org Video Driver, version 15.0
[ 41.632] (II) LoadModule: "fbdev"
[ 41.632] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 41.656] (II) Module fbdev: vendor="X.Org Foundation"
[ 41.656] compiled for 1.15.0, module version = 0.4.4
[ 41.656] Module class: X.Org Video Driver
[ 41.656] ABI class: X.Org Video Driver, version 15.0
[ 41.656] (II) LoadModule: "vesa"
[ 41.656] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 41.669] (II) Module vesa: vendor="X.Org Foundation"
[ 41.669] compiled for 1.15.0, module version = 2.3.3
[ 41.669] Module class: X.Org Video Driver
[ 41.669] ABI class: X.Org Video Driver, version 15.0
[ 41.669] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 41.693] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 41.693] (II) FBDEV: driver for framebuffer: fbdev
[ 41.693] (II) VESA: driver for VESA chipsets: vesa
[ 41.693] (++) using VT number 7
[ 41.732] (WW) Falling back to old probe method for modesetting
[ 41.732] (WW) Falling back to old probe method for fbdev
[ 41.732] (II) Loading sub module "fbdevhw"
[ 41.732] (II) LoadModule: "fbdevhw"
[ 41.732] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 41.857] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 41.857] compiled for 1.15.1, module version = 0.0.2
[ 41.857] ABI class: X.Org Video Driver, version 15.0
[ 41.857] (WW) Falling back to old probe method for vesa
[ 41.858] (II) intel(0): Creating default Display subsection in Screen
sectio
n
"Default Screen Section" for depth/fbbpp 24/32
[ 41.858] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 41.858] (==) intel(0): RGB weight 888
[ 41.858] (==) intel(0): Default visual is TrueColor
[ 41.858] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 41.858] (**) intel(0): Relaxed fencing enabled
[ 41.858] (**) intel(0): Wait on SwapBuffers? enabled
[ 41.858] (**) intel(0): Triple buffering? enabled
[ 41.858] (**) intel(0): Framebuffer tiled
[ 41.858] (**) intel(0): Pixmaps tiled
[ 41.858] (**) intel(0): 3D buffers tiled
[ 41.858] (**) intel(0): SwapBuffers wait enabled
[ 41.858] (==) intel(0): video overlay key set to 0x101fe
[ 41.858] (II) intel(0): Output LVDS1 has no monitor section
[ 41.858] (--) intel(0): found backlight control interface
/sys/class/backlig
ht/acpi_video0
[ 41.956] (II) intel(0): Output VGA1 has no monitor section
[ 41.956] (II) intel(0): EDID for output LVDS1
[ 41.956] (II) intel(0): Not using default mode "320x240" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "400x300" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "400x300" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "512x384" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "640x480" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "640x512" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "800x600" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "896x672" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "928x696" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "960x720" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "576x432" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "680x384" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "680x384" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "700x525" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "720x450" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "800x512" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "840x525" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "840x525" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "960x540" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "960x600" (doublescan mode
no
t supported)
[ 41.956] (II) intel(0): Not using default mode "1024x768" (doublescan mode
n
ot supported)
[ 41.956] (II) intel(0): Printing probed modes for output LVDS1
[ 41.956] (II) intel(0): Modeline "1280x800"x60.0 70.59 1280 1344 1408
145
3 800 804 806 810 -hsync -vsync (48.6 kHz P)
[ 41.956] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
134
4 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 41.956] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
6
00 601 605 628 +hsync +vsync (37.9 kHz d)
[ 41.956] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
6
00 601 603 625 +hsync +vsync (35.2 kHz d)
[ 41.956] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
48
0 490 492 525 -hsync -vsync (31.5 kHz d)
[ 42.056] (II) intel(0): EDID for output VGA1
[ 42.056] (II) intel(0): Manufacturer: SAM Model: 529 Serial#: 1162228275
[ 42.056] (II) intel(0): Year: 2009 Week: 35
[ 42.056] (II) intel(0): EDID Version: 1.3
[ 42.056] (II) intel(0): Analog Display Input, Input Voltage Level:
0.700/0.
300 V
[ 42.056] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 42.056] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 42.056] (II) intel(0): Gamma: 2.20
[ 42.056] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 42.056] (II) intel(0): First detailed timing is preferred mode
[ 42.056] (II) intel(0): redX: 0.650 redY: 0.337 greenX: 0.295 greenY:
0.60
5
[ 42.056] (II) intel(0): blueX: 0.147 blueY: 0.075 whiteX: 0.312 whiteY:
0.
329
[ 42.056] (II) intel(0): Supported established timings:
[ 42.056] (II) intel(0): 640x480@60Hz
[ 42.056] (II) intel(0): 800x600@56Hz
[ 42.056] (II) intel(0): 800x600@60Hz
[ 42.056] (II) intel(0): 1024x768@60Hz
[ 42.056] (II) intel(0): Manufacturer's mask: 0
[ 42.056] (II) intel(0): Supported standard timings:
[ 42.056] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 42.056] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 42.056] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid:
32897
[ 42.056] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 42.056] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 42.056] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid:
16553
[ 42.056] (II) intel(0): Supported detailed timing:
[ 42.056] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 42.056] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052
h_blan
k_end 2200 h_border: 0
[ 42.056] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089
v_blan
king: 1125 v_border: 0
[ 42.056] (II) intel(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 81
kHz, PixClock max 175 MHz
[ 42.056] (II) intel(0): Monitor name: SyncMaster
[ 42.056] (II) intel(0): Serial No: H9MS812067
[ 42.056] (II) intel(0): EDID (in hex):
[ 42.056] (II) intel(0): 00ffffffffffff004c2d290533324645
[ 42.056] (II) intel(0): 231301030e331d782a98d1a6564b9b25
[ 42.056] (II) intel(0): 1350542308008100814081809500b300
[ 42.056] (II) intel(0): a94001010101023a801871382d40582c
[ 42.056] (II) intel(0): 4500fe1f1100001e000000fd00383d1e
[ 42.056] (II) intel(0): 5111000a202020202020000000fc0053
[ 42.056] (II) intel(0): 796e634d61737465720a2020000000ff
[ 42.056] (II) intel(0): 0048394d533831323036370a202000bf
[ 42.056] (II) intel(0): Printing probed modes for output VGA1
[ 42.056] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052
22
00 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 42.056] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856
21
60 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 42.057] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960
22
40 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 42.057] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440
16
88 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 42.057] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672
190
4 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 42.057] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488
180
0 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 42.057] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480
168
0 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 42.057] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
134
4 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 42.057] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
6
00 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42.057] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
6
00 601 603 625 +hsync +vsync (35.2 kHz e)
[ 42.057] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800
48
0 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.057] (II) intel(0): Output LVDS1 connected
[ 42.057] (II) intel(0): Output VGA1 connected
[ 42.057] (II) intel(0): Using exact sizes for initial modes
[ 42.057] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 42.057] (II) intel(0): Output VGA1 using initial mode 1280x800
[ 42.057] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherw
ise stated.
[ 42.057] (II) intel(0): Kernel page flipping support detected, enabling
[ 42.057] (==) intel(0): DPI set to (96, 96)
[ 42.057] (II) Loading sub module "fb"
[ 42.057] (II) LoadModule: "fb"
[ 42.057] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 42.125] (II) Module fb: vendor="X.Org Foundation"
[ 42.125] compiled for 1.15.1, module version = 1.0.0
[ 42.125] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42.125] (II) Loading sub module "dri2"
[ 42.125] (II) LoadModule: "dri2"
[ 42.125] (II) Module "dri2" already built-in
[ 42.125] (II) UnloadModule: "modesetting"
[ 42.125] (II) Unloading modesetting
[ 42.125] (II) UnloadModule: "fbdev"
[ 42.125] (II) Unloading fbdev
[ 42.125] (II) UnloadSubModule: "fbdevhw"
[ 42.125] (II) Unloading fbdevhw
[ 42.125] (II) UnloadModule: "vesa"
[ 42.125] (II) Unloading vesa
[ 42.125] (==) Depth 24 pixmap format is 32 bpp
[ 42.160] (II) intel(0): [DRI2] Setup complete
[ 42.160] (II) intel(0): [DRI2] DRI driver: i965
[ 42.160] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120,
til
ed
[ 42.272] (II) UXA(0): Driver registered support for the following
operations
:
[ 42.272] (II) solid
[ 42.272] (II) copy
[ 42.272] (II) composite (RENDER acceleration)
[ 42.272] (II) put_image
[ 42.272] (II) get_image
[ 42.272] (==) intel(0): Backing store enabled
[ 42.272] (==) intel(0): Silken mouse enabled
[ 42.274] (II) intel(0): Initializing HW Cursor
[ 42.274] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabl
ed message.
[ 42.314] (==) intel(0): DPMS enabled
[ 42.314] (==) intel(0): Intel XvMC decoder enabled
[ 42.314] (II) intel(0): Set up textured video
[ 42.314] (II) intel(0): Set up overlay video
[ 42.314] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 42.314] (II) intel(0): direct rendering: DRI2 Enabled
[ 42.314] (==) intel(0): hotplug detection: "enabled"
[ 42.380] (--) RandR disabled
[ 42.532] (II) SELinux: Disabled on system
[ 43.747] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.747] (II) AIGLX: enabled GLX_ARB_create_context
[ 43.747] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 43.747] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 43.747] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.747] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.747] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 43.747] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 43.747] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.747] (II) AIGLX: Loaded and initialized i965
[ 43.747] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.747] (II) intel(0): Setting screen physical size to 338 x 211
[ 46.181] (II) XKB: Reusing cached keymap
[ 46.184] (II) config/udev: Adding input device Video Bus
(/dev/input/event14
)
[ 46.184] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.184] (II) LoadModule: "evdev"
[ 46.184] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 46.438] (II) Module evdev: vendor="X.Org Foundation"
[ 46.438] compiled for 1.15.0, module version = 2.8.2
[ 46.438] Module class: X.Org XInput Driver
[ 46.438] ABI class: X.Org XInput driver, version 20.0
[ 46.438] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.438] Option "XkbRules" "evdev"
[ 46.438] Option "xkb_model" "pc105"
[ 46.438] Option "xkb_layout" "fr"
[ 46.438] Option "_source" "server/udev"
[ 46.438] Option "name" "Video Bus"
[ 46.438] Option "path" "/dev/input/event14"
[ 46.438] Option "device" "/dev/input/event14"
[ 46.438] Option "xkb_variant" "latin9"
[ 46.438] Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PN
P0A08:00/LNXVIDEO:01/input/input17/event14"
[ 46.438] Option "driver" "evdev"
[ 46.438] (**) Video Bus: always reports core events
[ 46.438] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 46.438] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.438] (--) evdev: Video Bus: Found keys
[ 46.439] (II) evdev: Video Bus: Configuring as keyboard
[ 46.439] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/
PNP0A08:00/LNXVIDEO:01/input/input17/event14"
[ 46.439] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOA
RD, id 6)
[ 46.439] (**) Option "xkb_rules" "evdev"
[ 46.439] (**) Option "xkb_model" "pc105"
[ 46.439] (**) Option "xkb_layout" "fr"
[ 46.439] (**) Option "xkb_variant" "latin9"
[ 46.832] (II) config/udev: Adding input device Sony Vaio Keys
(/dev/input/ev
ent7)
[ 46.832] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 46.832] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 46.832] Option "XkbRules" "evdev"
[ 46.832] Option "xkb_model" "pc105"
[ 46.832] Option "xkb_layout" "fr"
[ 46.832] Option "_source" "server/udev"
[ 46.832] Option "name" "Sony Vaio Keys"
[ 46.832] Option "path" "/dev/input/event7"
[ 46.832] Option "device" "/dev/input/event7"
[ 46.832] Option "xkb_variant" "latin9"
[ 46.832] Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PN
P0A08:00/device:39/SNY6001:00/input/input8/event7"
[ 46.832] Option "driver" "evdev"
[ 46.832] (**) Sony Vaio Keys: always reports core events
[ 46.832] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event7"
[ 46.832] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 46.832] (--) evdev: Sony Vaio Keys: Found keys
[ 46.832] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 46.832] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/
PNP0A08:00/device:39/SNY6001:00/input/input8/event7"
[ 46.832] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type:
K
EYBOARD, id 7)
[ 46.832] (**) Option "xkb_rules" "evdev"
[ 46.832] (**) Option "xkb_model" "pc105"
[ 46.832] (**) Option "xkb_layout" "fr"
[ 46.832] (**) Option "xkb_variant" "latin9"
[ 46.832] (II) XKB: Reusing cached keymap
[ 46.833] (II) config/udev: Adding input device Sony Vaio Jogdial
(/dev/input
/event8)
[ 46.833] (II) No input driver specified, ignoring this device.
[ 46.833] (II) This device may have been added with another device file.
[ 46.833] (II) config/udev: Adding input device Sony Vaio Jogdial
(/dev/input
/mouse2)
[ 46.833] (II) No input driver specified, ignoring this device.
[ 46.833] (II) This device may have been added with another device file.
[ 46.833] (II) config/udev: Adding input device Power Button
(/dev/input/even
t5)
[ 46.833] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 46.833] (II) Using input driver 'evdev' for 'Power Button'
[ 46.833] Option "XkbRules" "evdev"
[ 46.833] Option "xkb_model" "pc105"
[ 46.833] Option "xkb_layout" "fr"
[ 46.833] Option "_source" "server/udev"
[ 46.833] Option "name" "Power Button"
[ 46.833] Option "path" "/dev/input/event5"
[ 46.833] Option "device" "/dev/input/event5"
[ 46.833] Option "xkb_variant" "latin9"
[ 46.833] Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PN
P0C0C:00/input/input6/event5"
[ 46.833] Option "driver" "evdev"
[ 46.833] (**) Power Button: always reports core events
[ 46.833] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 46.833] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.833] (--) evdev: Power Button: Found keys
[ 46.833] (II) evdev: Power Button: Configuring as keyboard
[ 46.833] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/
PNP0C0C:00/input/input6/event5"
[ 46.833] (II) XINPUT: Adding extended input device "Power Button" (type:
KEY
BOARD, id 8)
[ 46.833] (**) Option "xkb_rules" "evdev"
[ 46.834] (**) Option "xkb_model" "pc105"
[ 46.834] (**) Option "xkb_layout" "fr"
[ 46.834] (**) Option "xkb_variant" "latin9"
[ 46.834] (II) XKB: Reusing cached keymap
[ 46.834] (II) config/udev: Adding input device Lid Switch
(/dev/input/event6
)
[ 46.834] (II) No input driver specified, ignoring this device.
[ 46.834] (II) This device may have been added with another device file.
[ 46.834] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 46.835] (II) config/udev: Adding input device HDA Intel Mic
(/dev/input/eve
nt13)
[ 46.835] (II) No input driver specified, ignoring this device.
[ 46.835] (II) This device may have been added with another device file.
[ 46.835] (II) config/udev: Adding input device HDA Intel Headphone
(/dev/inp
ut/event12)
[ 46.835] (II) No input driver specified, ignoring this device.
[ 46.835] (II) This device may have been added with another device file.
[ 46.835] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/event1)
[ 46.835] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
cat
chall"
[ 46.835] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.835] Option "XkbRules" "evdev"
[ 46.835] Option "xkb_model" "pc105"
[ 46.835] Option "xkb_layout" "fr"
[ 46.835] Option "_source" "server/udev"
[ 46.835] Option "name" "Logitech USB Receiver"
[ 46.835] Option "path" "/dev/input/event1"
[ 46.835] Option "device" "/dev/input/event1"
[ 46.835] Option "xkb_variant" "latin9"
[ 46.835] Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.1/
usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1"
[ 46.835] Option "driver" "evdev"
[ 46.835] (**) Logitech USB Receiver: always reports core events
[ 46.835] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 46.835] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc529
[ 46.835] (--) evdev: Logitech USB Receiver: Found keys
[ 46.835] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.835] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.
1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1"
[ 46.835] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(
type: KEYBOARD, id 9)
[ 46.836] (**) Option "xkb_rules" "evdev"
[ 46.836] (**) Option "xkb_model" "pc105"
[ 46.836] (**) Option "xkb_layout" "fr"
[ 46.836] (**) Option "xkb_variant" "latin9"
[ 46.836] (II) XKB: Reusing cached keymap
[ 46.836] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/event2)
[ 46.836] (**) Logitech USB Receiver: Applying InputClass "evdev pointer
catc
hall"
[ 46.836] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
cat
chall"
[ 46.836] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.836] Option "XkbRules" "evdev"
[ 46.836] Option "xkb_model" "pc105"
[ 46.836] Option "xkb_layout" "fr"
[ 46.836] Option "_source" "server/udev"
[ 46.836] Option "name" "Logitech USB Receiver"
[ 46.836] Option "path" "/dev/input/event2"
[ 46.836] Option "device" "/dev/input/event2"
[ 46.836] Option "xkb_variant" "latin9"
[ 46.836] Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.1/
usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2"
[ 46.836] Option "driver" "evdev"
[ 46.836] (**) Logitech USB Receiver: always reports core events
[ 46.836] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 46.836] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [652..1]
[ 46.837] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc529
[ 46.837] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 46.837] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.837] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.837] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 46.837] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 46.837] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to
exi
st.
[ 46.837] (--) evdev: Logitech USB Receiver: Found keys
[ 46.837] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.837] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.837] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.837] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.837] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWh
eelInertia: 10, EmulateWheelTimeout: 200
[ 46.837] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.
1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2"
[ 46.837] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(
type: KEYBOARD, id 10)
[ 46.837] (**) Option "xkb_rules" "evdev"
[ 46.837] (**) Option "xkb_model" "pc105"
[ 46.837] (**) Option "xkb_layout" "fr"
[ 46.837] (**) Option "xkb_variant" "latin9"
[ 46.837] (II) XKB: Reusing cached keymap
[ 46.837] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.837] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 46.837] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.837] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.837] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.837] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.838] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/mouse0)
[ 46.838] (II) No input driver specified, ignoring this device.
[ 46.838] (II) This device may have been added with another device file.
[ 46.838] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/event3)
[ 46.838] (**) Logitech USB Receiver: Applying InputClass "evdev pointer
catc
hall"
[ 46.838] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.838] Option "XkbRules" "evdev"
[ 46.838] Option "XkbModel" "pc104"
[ 46.838] Option "XkbLayout" "us"
[ 46.838] Option "_source" "server/udev"
[ 46.838] Option "name" "Logitech USB Receiver"
[ 46.838] Option "path" "/dev/input/event3"
[ 46.838] Option "device" "/dev/input/event3"
[ 46.838] Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/
usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3"
[ 46.838] Option "driver" "evdev"
[ 46.838] (**) Logitech USB Receiver: always reports core events
[ 46.838] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 46.838] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 46.838] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 46.838] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.838] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.838] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 46.838] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.838] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.838] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.838] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWh
eelInertia: 10, EmulateWheelTimeout: 200
[ 46.838] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.
7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3"
[ 46.838] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(
type: MOUSE, id 11)
[ 46.838] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.839] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.839] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.839] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.839] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.839] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/mouse1)
[ 46.839] (II) No input driver specified, ignoring this device.
[ 46.839] (II) This device may have been added with another device file.
[ 46.839] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/event4)
[ 46.839] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
cat
chall"
[ 46.839] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.839] Option "XkbRules" "evdev"
[ 46.840] Option "xkb_model" "pc105"
[ 46.840] Option "xkb_layout" "fr"
[ 46.840] Option "_source" "server/udev"
[ 46.840] Option "name" "Logitech USB Receiver"
[ 46.840] Option "path" "/dev/input/event4"
[ 46.840] Option "device" "/dev/input/event4"
[ 46.840] Option "xkb_variant" "latin9"
[ 46.840] Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/
usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4"
[ 46.840] Option "driver" "evdev"
[ 46.840] (**) Logitech USB Receiver: always reports core events
[ 46.840] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 46.840] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [652..1]
[ 46.840] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 46.840] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 46.840] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.840] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.840] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to
exi
st.
[ 46.840] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 46.840] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to
exi
st.
[ 46.840] (--) evdev: Logitech USB Receiver: Found keys
[ 46.840] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.840] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.840] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.840] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.840] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWh
eelInertia: 10, EmulateWheelTimeout: 200
[ 46.840] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.
7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4"
[ 46.840] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(
type: KEYBOARD, id 12)
[ 46.840] (**) Option "xkb_rules" "evdev"
[ 46.840] (**) Option "xkb_model" "pc105"
[ 46.840] (**) Option "xkb_layout" "fr"
[ 46.840] (**) Option "xkb_variant" "latin9"
[ 46.840] (II) XKB: Reusing cached keymap
[ 46.840] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.840] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 46.840] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.840] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.840] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.840] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.841] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/event10)
[ 46.841] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
cat
chall"
[ 46.841] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.841] Option "XkbRules" "evdev"
[ 46.841] Option "xkb_model" "pc105"
[ 46.841] Option "xkb_layout" "fr"
[ 46.841] Option "_source" "server/udev"
[ 46.841] Option "name" "Logitech USB Receiver"
[ 46.841] Option "path" "/dev/input/event10"
[ 46.841] Option "device" "/dev/input/event10"
[ 46.841] Option "xkb_variant" "latin9"
[ 46.841] Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/
usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10"
[ 46.841] Option "driver" "evdev"
[ 46.841] (**) Logitech USB Receiver: always reports core events
[ 46.841] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event10"
[ 46.841] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc50c
[ 46.841] (--) evdev: Logitech USB Receiver: Found keys
[ 46.841] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.841] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.
7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10"
[ 46.841] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(
type: KEYBOARD, id 13)
[ 46.841] (**) Option "xkb_rules" "evdev"
[ 46.841] (**) Option "xkb_model" "pc105"
[ 46.841] (**) Option "xkb_layout" "fr"
[ 46.841] (**) Option "xkb_variant" "latin9"
[ 46.841] (II) XKB: Reusing cached keymap
[ 46.842] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/event11)
[ 46.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer
catc
hall"
[ 46.842] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard
cat
chall"
[ 46.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.842] Option "XkbRules" "evdev"
[ 46.842] Option "xkb_model" "pc105"
[ 46.842] Option "xkb_layout" "fr"
[ 46.842] Option "_source" "server/udev"
[ 46.842] Option "name" "Logitech USB Receiver"
[ 46.842] Option "path" "/dev/input/event11"
[ 46.842] Option "device" "/dev/input/event11"
[ 46.842] Option "xkb_variant" "latin9"
[ 46.842] Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/
usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11"
[ 46.842] Option "driver" "evdev"
[ 46.842] (**) Logitech USB Receiver: always reports core events
[ 46.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event11"
[ 46.842] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [4173..1]
[ 46.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc50c
[ 46.842] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 46.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.842] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 46.842] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 46.842] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to
exi
st.
[ 46.842] (--) evdev: Logitech USB Receiver: Found keys
[ 46.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.842] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4,
EmulateWh
eelInertia: 10, EmulateWheelTimeout: 200
[ 46.842] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.
7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11"
[ 46.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver"
(
type: KEYBOARD, id 14)
[ 46.842] (**) Option "xkb_rules" "evdev"
[ 46.842] (**) Option "xkb_model" "pc105"
[ 46.842] (**) Option "xkb_layout" "fr"
[ 46.842] (**) Option "xkb_variant" "latin9"
[ 46.843] (II) XKB: Reusing cached keymap
[ 46.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.843] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 46.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.843] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/i
nput/mouse3)
[ 46.843] (II) No input driver specified, ignoring this device.
[ 46.843] (II) This device may have been added with another device file.
[ 46.844] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 46.844] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keybo
ard catchall"
[ 46.844] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 46.844] Option "XkbRules" "evdev"
[ 46.844] Option "xkb_model" "pc105"
[ 46.844] Option "xkb_layout" "fr"
[ 46.844] Option "_source" "server/udev"
[ 46.844] Option "name" "AT Translated Set 2 keyboard"
[ 46.844] Option "path" "/dev/input/event0"
[ 46.844] Option "device" "/dev/input/event0"
[ 46.844] Option "xkb_variant" "latin9"
[ 46.844] Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/in
put/input0/event0"
[ 46.844] Option "driver" "evdev"
[ 46.844] (**) AT Translated Set 2 keyboard: always reports core events
[ 46.844] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event
0"
[ 46.844] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 46.844] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 46.844] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 46.844] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/
input/input0/event0"
[ 46.844] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyb
oard" (type: KEYBOARD, id 15)
[ 46.844] (**) Option "xkb_rules" "evdev"
[ 46.844] (**) Option "xkb_model" "pc105"
[ 46.844] (**) Option "xkb_layout" "fr"
[ 46.844] (**) Option "xkb_variant" "latin9"
[ 46.844] (II) XKB: Reusing cached keymap
[ 46.845] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint
(/de
v/input/event16)
[ 46.845] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad
catchall"
[ 46.845] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad
catcha
ll"
[ 46.845] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default
clickpa
d buttons"
[ 46.845] (II) LoadModule: "synaptics"
[ 46.845] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 46.929] (II) Module synaptics: vendor="X.Org Foundation"
[ 46.929] compiled for 1.15.0, module version = 1.7.3
[ 46.929] Module class: X.Org XInput Driver
[ 46.929] ABI class: X.Org XInput driver, version 20.0
[ 46.929] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 46.929] Option "_source" "server/udev"
[ 46.929] Option "name" "AlpsPS/2 ALPS GlidePoint"
[ 46.929] Option "path" "/dev/input/event16"
[ 46.929] Option "device" "/dev/input/event16"
[ 46.929] Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/in
put/input13/event16"
[ 46.929] Option "driver" "synaptics"
[ 46.929] Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 46.929] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 46.929] (**) Option "Device" "/dev/input/event16"
[ 46.990] (**) Option "Device" "/dev/input/event16"
[ 46.990] port opened successfully
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(re
s 0)
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(res
0)
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 46.990] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report
fi
nger width.
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right
middl
e
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width
rang
e. defaulting to 0 - 15
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 46.990] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 47.056] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/
input/input13/event16"
[ 47.056] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS
GlidePoint
" (type: TOUCHPAD, id 16)
[ 47.056] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now
c
onstant deceleration 2.5
[ 47.056] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now
1
..75
[ 47.056] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is
no
w 0.156
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme
1
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 47.056] (**) Option "Device" "/dev/input/event16"
[ 47.056] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 47.056] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint
(/de
v/input/mouse5)
[ 47.057] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass
"tou
chpad ignore duplicates"
[ 47.057] (II) config/udev: Adding input device ALPS PS/2 Device
(/dev/input/
event15)
[ 47.057] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer
catchall"
[ 47.057] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 47.057] Option "XkbRules" "evdev"
[ 47.057] Option "XkbModel" "pc104"
[ 47.057] Option "XkbLayout" "us"
[ 47.057] Option "_source" "server/udev"
[ 47.057] Option "name" "ALPS PS/2 Device"
[ 47.057] Option "path" "/dev/input/event15"
[ 47.057] Option "device" "/dev/input/event15"
[ 47.057] Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/in
put/input16/event15"
[ 47.057] Option "driver" "evdev"
[ 47.057] (**) ALPS PS/2 Device: always reports core events
[ 47.057] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event15"
[ 47.057] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 47.057] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 47.057] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 47.057] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 47.057] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 47.057] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 47.057] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4,
EmulateWheelIn
ertia: 10, EmulateWheelTimeout: 200
[ 47.057] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/
input/input16/event15"
[ 47.057] (II) XINPUT: Adding extended input device "ALPS PS/2 Device"
(type:
MOUSE, id 17)
[ 47.057] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 47.057] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 47.057] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 47.057] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 47.057] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 47.058] (II) config/udev: Adding input device ALPS PS/2 Device
(/dev/input/
mouse4)
[ 47.058] (II) No input driver specified, ignoring this device.
[ 47.058] (II) This device may have been added with another device file.
[ 47.058] (II) config/udev: Adding input device PC Speaker
(/dev/input/event9
)
[ 47.058] (II) No input driver specified, ignoring this device.
[ 47.058] (II) This device may have been added with another device file.
[ 47.058] (II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event17)
[ 47.059] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev
keybo
ard catchall"
[ 47.059] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 47.059] Option "XkbRules" "evdev"
[ 47.059] Option "xkb_model" "pc105"
[ 47.059] Option "xkb_layout" "fr"
[ 47.059] Option "_source" "server/udev"
[ 47.059] Option "name" "ACPI Virtual Keyboard Device"
[ 47.059] Option "path" "/dev/input/event17"
[ 47.059] Option "device" "/dev/input/event17"
[ 47.059] Option "xkb_variant" "latin9"
[ 47.059] Option "config_info"
"udev:/sys/devices/virtual/input/input18/ev
ent17"
[ 47.059] Option "driver" "evdev"
[ 47.059] (**) ACPI Virtual Keyboard Device: always reports core events
[ 47.059] (**) evdev: ACPI Virtual Keyboard Device: Device:
"/dev/input/event
17"
[ 47.059] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 47.059] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 47.059] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 47.059] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input18/
event17"
[ 47.059] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard
De
vice" (type: KEYBOARD, id 18)
[ 47.059] (**) Option "xkb_rules" "evdev"
[ 47.059] (**) Option "xkb_model" "pc105"
[ 47.059] (**) Option "xkb_layout" "fr"
[ 47.059] (**) Option "xkb_variant" "latin9"
[ 47.059] (II) XKB: Reusing cached keymap
[ 57.456] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680,
ti
led
[ 62.700] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 62.700] (II) intel(0): Using EDID range info for horizontal sync
[ 62.700] (II) intel(0): Using EDID range info for vertical refresh
[ 62.700] (II) intel(0): Printing DDC gathered Modelines:
[ 62.700] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052
220
0 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 62.700] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
60
0 601 605 628 +hsync +vsync (37.9 kHz e)
[ 62.700] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
60
0 601 603 625 +hsync +vsync (35.2 kHz e)
[ 62.700] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480
490 492 525 -hsync -vsync (31.5 kHz e)
[ 62.700] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344
768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 62.700] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680
800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 62.701] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800
960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 62.701] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
168
8 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 62.701] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672
1904
900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 62.701] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
224
0 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 62.701] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
216
0 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 99.280] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 99.280] (II) intel(0): Using hsync ranges from config file
[ 99.280] (II) intel(0): Using vrefresh ranges from config file
[ 99.280] (II) intel(0): Printing DDC gathered Modelines:
[ 99.280] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052
220
0 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 99.280] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
60
0 601 605 628 +hsync +vsync (37.9 kHz e)
[ 99.280] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
60
0 601 603 625 +hsync +vsync (35.2 kHz e)
[ 99.280] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480
490 492 525 -hsync -vsync (31.5 kHz e)
[ 99.280] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344
768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 99.280] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680
800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 99.280] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800
960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 99.280] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
168
8 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 99.280] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672
1904
900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 99.280] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
224
0 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 99.280] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
216
0 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 103.460] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 103.460] (II) intel(0): Using hsync ranges from config file
[ 103.460] (II) intel(0): Using vrefresh ranges from config file
[ 103.460] (II) intel(0): Printing DDC gathered Modelines:
[ 103.460] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052
220
0 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 103.460] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
60
0 601 605 628 +hsync +vsync (37.9 kHz e)
[ 103.460] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
60
0 601 603 625 +hsync +vsync (35.2 kHz e)
[ 103.460] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480
490 492 525 -hsync -vsync (31.5 kHz e)
[ 103.460] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344
768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 103.460] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680
800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 103.460] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800
960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 103.460] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
168
8 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 103.460] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672
1904
900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 103.460] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
224
0 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 103.460] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
216
0 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 103.904] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 103.904] (II) intel(0): Using hsync ranges from config file
[ 103.904] (II) intel(0): Using vrefresh ranges from config file
[ 103.904] (II) intel(0): Printing DDC gathered Modelines:
[ 103.904] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052
220
0 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 103.904] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
60
0 601 605 628 +hsync +vsync (37.9 kHz e)
[ 103.904] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
60
0 601 603 625 +hsync +vsync (35.2 kHz e)
[ 103.904] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480
490 492 525 -hsync -vsync (31.5 kHz e)
[ 103.904] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344
768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 103.904] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680
800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 103.904] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488
1800
960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 103.904] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440
168
8 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 103.904] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672
1904
900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 103.904] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960
224
0 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 103.904] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856
216
0 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 242.829] (II) XKB: Reusing cached keymap
[ 242.829] (II) XKB: Reusing cached keymap
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/Xorg (xorg_backtrace+0x4f) [0xb7744c0f]
(EE) 1: /usr/bin/Xorg (0xb759d000+0x1ab9e4) [0xb77489e4]
(EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb757b40c]
(EE) 3: /usr/bin/Xorg (0xb759d000+0x1383e6) [0xb76d53e6]
(EE) 4: /usr/bin/Xorg (0xb759d000+0x138ce2) [0xb76d5ce2]
(EE) 5: /usr/bin/Xorg (miPointerSetPosition+0x448) [0xb772fd98]
(EE) 6: /usr/bin/Xorg (0xb759d000+0x53120) [0xb75f0120]
(EE) 7: /usr/bin/Xorg (0xb759d000+0x535b4) [0xb75f05b4]
(EE) 8: /usr/bin/Xorg (GetPointerEvents+0x154) [0xb75f1d44]
(EE) 9: /usr/bin/Xorg (QueuePointerEvents+0x4a) [0xb75f225a]
(EE) 10: /usr/bin/Xorg (xf86PostMotionEventM+0x24b) [0xb762b8cb]
(EE) 11: /usr/lib/xorg/modules/input/evdev_drv.so (0xb63e4000+0x48df)
[0xb63e88d
f]
(EE) 12: /usr/bin/Xorg (0xb759d000+0x7e095) [0xb761b095]
(EE) 13: /usr/bin/Xorg (0xb759d000+0xa8b4b) [0xb7645b4b]
(EE) 14: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb757b400]
(EE) 15: linux-gate.so.1 (__kernel_vsyscall+0x10) [0xb757b424]
(EE) 16: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__select+0x2d) [0xb71da7dd]
(EE) 17: /usr/bin/Xorg (WaitForSomething+0x178) [0xb7741fb8]
(EE) 18: /usr/bin/Xorg (0xb759d000+0x3c88e) [0xb75d988e]
(EE) 19: /usr/bin/Xorg (0xb759d000+0x40c25) [0xb75ddc25]
(EE) 20: /usr/bin/Xorg (0xb759d000+0x2a93e) [0xb75c793e]
(EE) 21: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf3)
[0xb71
11a63]
(EE) 22: /usr/bin/Xorg (0xb759d000+0x2a974) [0xb75c7974]
(EE)
(EE) Segmentation fault at address 0xe8b9eb36
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional
info
rmation.
(EE)
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) Server terminated with error (1). Closing log file.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jun 30 2010 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2314672 Apr 15 21:50 /usr/bin/Xorg
Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so.1.2.0 to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/arm-linux-gnueabihf/libGL.so to /usr/lib/mesa-diverted/arm-linux-gnueabihf/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/libGL.so.1.2.0 to /usr/lib/mesa-diverted/libGL.so.1.2.0 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.14-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 8264 May 17 18:49 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 8259 May 17 18:49 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 8259 May 17 18:49 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 8259 May 17 18:49 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 8259 May 17 18:49 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 55454 May 24 16:10 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 250.437]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 250.437] X Protocol Version 11, Revision 0
[ 250.437] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 250.437] Current Operating System: Linux Dexter 3.14-1-686-pae #1 SMP Debian 3.14.4-1 (2014-05-13) i686
[ 250.437] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae root=UUID=cff90031-f660-49c4-88b7-80620f940cdb ro splash quiet
[ 250.437] Build Date: 15 April 2014 07:46:36PM
[ 250.437] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 250.437] Current version of pixman: 0.32.4
[ 250.437] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 250.437] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 250.437] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 24 16:10:00 2014
[ 250.437] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 250.438] (==) No Layout section. Using the first Screen section.
[ 250.438] (==) No screen section available. Using defaults.
[ 250.438] (**) |-->Screen "Default Screen Section" (0)
[ 250.438] (**) | |-->Monitor "<default monitor>"
[ 250.438] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 250.438] (==) Automatically adding devices
[ 250.438] (==) Automatically enabling devices
[ 250.438] (==) Automatically adding GPU devices
[ 250.438] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 250.438] Entry deleted from font path.
[ 250.438] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 250.438] Entry deleted from font path.
[ 250.438] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 250.438] Entry deleted from font path.
[ 250.438] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 250.438] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 250.438] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 250.438] (II) Loader magic: 0xb77416c0
[ 250.438] (II) Module ABI versions:
[ 250.438] X.Org ANSI C Emulation: 0.4
[ 250.438] X.Org Video Driver: 15.0
[ 250.438] X.Org XInput driver : 20.0
[ 250.438] X.Org Server Extension : 8.0
[ 250.438] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 250.440] (--) PCI:*(0:0:2:0) 8086:2a02:104d:9008 rev 12, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 250.441] (--) PCI: (0:0:2:1) 8086:2a03:104d:9008 rev 12, Mem @ 0xfc100000/1048576
[ 250.441] Initializing built-in extension Generic Event Extension
[ 250.441] Initializing built-in extension SHAPE
[ 250.441] Initializing built-in extension MIT-SHM
[ 250.441] Initializing built-in extension XInputExtension
[ 250.441] Initializing built-in extension XTEST
[ 250.441] Initializing built-in extension BIG-REQUESTS
[ 250.441] Initializing built-in extension SYNC
[ 250.441] Initializing built-in extension XKEYBOARD
[ 250.441] Initializing built-in extension XC-MISC
[ 250.441] Initializing built-in extension SECURITY
[ 250.441] Initializing built-in extension XINERAMA
[ 250.441] Initializing built-in extension XFIXES
[ 250.441] Initializing built-in extension RENDER
[ 250.441] Initializing built-in extension RANDR
[ 250.441] Initializing built-in extension COMPOSITE
[ 250.441] Initializing built-in extension DAMAGE
[ 250.441] Initializing built-in extension MIT-SCREEN-SAVER
[ 250.441] Initializing built-in extension DOUBLE-BUFFER
[ 250.441] Initializing built-in extension RECORD
[ 250.441] Initializing built-in extension DPMS
[ 250.441] Initializing built-in extension Present
[ 250.441] Initializing built-in extension DRI3
[ 250.441] Initializing built-in extension X-Resource
[ 250.441] Initializing built-in extension XVideo
[ 250.441] Initializing built-in extension XVideo-MotionCompensation
[ 250.441] Initializing built-in extension SELinux
[ 250.441] Initializing built-in extension XFree86-VidModeExtension
[ 250.441] Initializing built-in extension XFree86-DGA
[ 250.441] Initializing built-in extension XFree86-DRI
[ 250.441] Initializing built-in extension DRI2
[ 250.441] (II) LoadModule: "glx"
[ 250.441] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 250.441] (II) Module glx: vendor="X.Org Foundation"
[ 250.442] compiled for 1.15.1, module version = 1.0.0
[ 250.442] ABI class: X.Org Server Extension, version 8.0
[ 250.442] (==) AIGLX enabled
[ 250.442] Loading extension GLX
[ 250.442] (==) Matched intel as autoconfigured driver 0
[ 250.442] (==) Matched intel as autoconfigured driver 1
[ 250.442] (==) Matched modesetting as autoconfigured driver 2
[ 250.442] (==) Matched fbdev as autoconfigured driver 3
[ 250.442] (==) Matched vesa as autoconfigured driver 4
[ 250.442] (==) Assigned the driver to the xf86ConfigLayout
[ 250.442] (II) LoadModule: "intel"
[ 250.442] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 250.442] (II) Module intel: vendor="X.Org Foundation"
[ 250.442] compiled for 1.15.0, module version = 2.21.15
[ 250.442] Module class: X.Org Video Driver
[ 250.442] ABI class: X.Org Video Driver, version 15.0
[ 250.442] (II) LoadModule: "modesetting"
[ 250.442] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 250.442] (II) Module modesetting: vendor="X.Org Foundation"
[ 250.442] compiled for 1.15.1, module version = 0.8.1
[ 250.442] Module class: X.Org Video Driver
[ 250.442] ABI class: X.Org Video Driver, version 15.0
[ 250.442] (II) LoadModule: "fbdev"
[ 250.443] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 250.443] (II) Module fbdev: vendor="X.Org Foundation"
[ 250.443] compiled for 1.15.0, module version = 0.4.4
[ 250.443] Module class: X.Org Video Driver
[ 250.443] ABI class: X.Org Video Driver, version 15.0
[ 250.443] (II) LoadModule: "vesa"
[ 250.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 250.443] (II) Module vesa: vendor="X.Org Foundation"
[ 250.443] compiled for 1.15.0, module version = 2.3.3
[ 250.443] Module class: X.Org Video Driver
[ 250.443] ABI class: X.Org Video Driver, version 15.0
[ 250.443] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 250.444] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 250.444] (II) FBDEV: driver for framebuffer: fbdev
[ 250.444] (II) VESA: driver for VESA chipsets: vesa
[ 250.444] (++) using VT number 7
[ 250.449] (WW) Falling back to old probe method for modesetting
[ 250.449] (WW) Falling back to old probe method for fbdev
[ 250.449] (II) Loading sub module "fbdevhw"
[ 250.449] (II) LoadModule: "fbdevhw"
[ 250.449] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 250.449] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 250.449] compiled for 1.15.1, module version = 0.0.2
[ 250.449] ABI class: X.Org Video Driver, version 15.0
[ 250.449] (WW) Falling back to old probe method for vesa
[ 250.450] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 250.450] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 250.450] (==) intel(0): RGB weight 888
[ 250.450] (==) intel(0): Default visual is TrueColor
[ 250.450] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 250.450] (**) intel(0): Relaxed fencing enabled
[ 250.450] (**) intel(0): Wait on SwapBuffers? enabled
[ 250.450] (**) intel(0): Triple buffering? enabled
[ 250.450] (**) intel(0): Framebuffer tiled
[ 250.450] (**) intel(0): Pixmaps tiled
[ 250.450] (**) intel(0): 3D buffers tiled
[ 250.450] (**) intel(0): SwapBuffers wait enabled
[ 250.450] (==) intel(0): video overlay key set to 0x101fe
[ 250.450] (II) intel(0): Output LVDS1 has no monitor section
[ 250.450] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 250.556] (II) intel(0): Output VGA1 has no monitor section
[ 250.556] (II) intel(0): EDID for output LVDS1
[ 250.556] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 250.556] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 250.556] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 250.556] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 250.556] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 250.557] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 250.557] (II) intel(0): Printing probed modes for output LVDS1
[ 250.557] (II) intel(0): Modeline "1280x800"x60.0 70.59 1280 1344 1408 1453 800 804 806 810 -hsync -vsync (48.6 kHz P)
[ 250.557] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 250.557] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 250.557] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 250.557] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 250.660] (II) intel(0): EDID for output VGA1
[ 250.660] (II) intel(0): Manufacturer: SAM Model: 529 Serial#: 1162228275
[ 250.660] (II) intel(0): Year: 2009 Week: 35
[ 250.660] (II) intel(0): EDID Version: 1.3
[ 250.660] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 250.660] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 250.660] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 250.660] (II) intel(0): Gamma: 2.20
[ 250.660] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 250.660] (II) intel(0): First detailed timing is preferred mode
[ 250.660] (II) intel(0): redX: 0.650 redY: 0.337 greenX: 0.295 greenY: 0.605
[ 250.660] (II) intel(0): blueX: 0.147 blueY: 0.075 whiteX: 0.312 whiteY: 0.329
[ 250.660] (II) intel(0): Supported established timings:
[ 250.660] (II) intel(0): 640x480@60Hz
[ 250.660] (II) intel(0): 800x600@56Hz
[ 250.661] (II) intel(0): 800x600@60Hz
[ 250.661] (II) intel(0): 1024x768@60Hz
[ 250.661] (II) intel(0): Manufacturer's mask: 0
[ 250.661] (II) intel(0): Supported standard timings:
[ 250.661] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 250.661] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 250.661] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 250.661] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 250.661] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 250.661] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 250.661] (II) intel(0): Supported detailed timing:
[ 250.661] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 250.661] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 250.661] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 250.661] (II) intel(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 250.661] (II) intel(0): Monitor name: SyncMaster
[ 250.661] (II) intel(0): Serial No: H9MS812067
[ 250.661] (II) intel(0): EDID (in hex):
[ 250.661] (II) intel(0): 00ffffffffffff004c2d290533324645
[ 250.661] (II) intel(0): 231301030e331d782a98d1a6564b9b25
[ 250.661] (II) intel(0): 1350542308008100814081809500b300
[ 250.661] (II) intel(0): a94001010101023a801871382d40582c
[ 250.661] (II) intel(0): 4500fe1f1100001e000000fd00383d1e
[ 250.661] (II) intel(0): 5111000a202020202020000000fc0053
[ 250.661] (II) intel(0): 796e634d61737465720a2020000000ff
[ 250.662] (II) intel(0): 0048394d533831323036370a202000bf
[ 250.662] (II) intel(0): Printing probed modes for output VGA1
[ 250.662] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 250.662] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 250.662] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 250.662] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 250.662] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 250.662] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 250.662] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 250.662] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 250.662] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 250.662] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 250.662] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 250.662] (II) intel(0): Output LVDS1 connected
[ 250.662] (II) intel(0): Output VGA1 connected
[ 250.662] (II) intel(0): Using exact sizes for initial modes
[ 250.662] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 250.662] (II) intel(0): Output VGA1 using initial mode 1280x800
[ 250.662] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 250.662] (II) intel(0): Kernel page flipping support detected, enabling
[ 250.663] (==) intel(0): DPI set to (96, 96)
[ 250.663] (II) Loading sub module "fb"
[ 250.663] (II) LoadModule: "fb"
[ 250.663] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 250.663] (II) Module fb: vendor="X.Org Foundation"
[ 250.663] compiled for 1.15.1, module version = 1.0.0
[ 250.663] ABI class: X.Org ANSI C Emulation, version 0.4
[ 250.663] (II) Loading sub module "dri2"
[ 250.663] (II) LoadModule: "dri2"
[ 250.663] (II) Module "dri2" already built-in
[ 250.663] (II) UnloadModule: "modesetting"
[ 250.663] (II) Unloading modesetting
[ 250.664] (II) UnloadModule: "fbdev"
[ 250.664] (II) Unloading fbdev
[ 250.664] (II) UnloadSubModule: "fbdevhw"
[ 250.664] (II) Unloading fbdevhw
[ 250.664] (II) UnloadModule: "vesa"
[ 250.664] (II) Unloading vesa
[ 250.664] (==) Depth 24 pixmap format is 32 bpp
[ 250.664] (II) intel(0): [DRI2] Setup complete
[ 250.664] (II) intel(0): [DRI2] DRI driver: i965
[ 250.664] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 250.682] (II) UXA(0): Driver registered support for the following operations:
[ 250.682] (II) solid
[ 250.682] (II) copy
[ 250.682] (II) composite (RENDER acceleration)
[ 250.682] (II) put_image
[ 250.682] (II) get_image
[ 250.682] (==) intel(0): Backing store enabled
[ 250.682] (==) intel(0): Silken mouse enabled
[ 250.682] (II) intel(0): Initializing HW Cursor
[ 250.682] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 250.683] (==) intel(0): DPMS enabled
[ 250.683] (==) intel(0): Intel XvMC decoder enabled
[ 250.683] (II) intel(0): Set up textured video
[ 250.683] (II) intel(0): Set up overlay video
[ 250.683] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 250.683] (II) intel(0): direct rendering: DRI2 Enabled
[ 250.683] (==) intel(0): hotplug detection: "enabled"
[ 250.764] (--) RandR disabled
[ 250.781] (II) SELinux: Disabled on system
[ 250.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 250.785] (II) AIGLX: enabled GLX_ARB_create_context
[ 250.785] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 250.785] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 250.785] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 250.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 250.785] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 250.785] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 250.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 250.785] (II) AIGLX: Loaded and initialized i965
[ 250.785] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 250.785] (II) intel(0): Setting screen physical size to 338 x 211
[ 250.821] (II) XKB: Reusing cached keymap
[ 250.824] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 250.824] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 250.824] (II) LoadModule: "evdev"
[ 250.824] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 250.824] (II) Module evdev: vendor="X.Org Foundation"
[ 250.824] compiled for 1.15.0, module version = 2.8.2
[ 250.824] Module class: X.Org XInput Driver
[ 250.824] ABI class: X.Org XInput driver, version 20.0
[ 250.824] (II) Using input driver 'evdev' for 'Video Bus'
[ 250.824] Option "XkbRules" "evdev"
[ 250.824] Option "xkb_model" "pc105"
[ 250.824] Option "xkb_layout" "fr"
[ 250.824] Option "_source" "server/udev"
[ 250.824] Option "name" "Video Bus"
[ 250.824] Option "path" "/dev/input/event14"
[ 250.824] Option "device" "/dev/input/event14"
[ 250.824] Option "xkb_variant" "latin9"
[ 250.824] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17/event14"
[ 250.824] Option "driver" "evdev"
[ 250.824] (**) Video Bus: always reports core events
[ 250.825] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 250.825] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 250.825] (--) evdev: Video Bus: Found keys
[ 250.825] (II) evdev: Video Bus: Configuring as keyboard
[ 250.825] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17/event14"
[ 250.825] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 250.825] (**) Option "xkb_rules" "evdev"
[ 250.825] (**) Option "xkb_model" "pc105"
[ 250.825] (**) Option "xkb_layout" "fr"
[ 250.825] (**) Option "xkb_variant" "latin9"
[ 250.850] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event7)
[ 250.850] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 250.850] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 250.850] Option "XkbRules" "evdev"
[ 250.850] Option "xkb_model" "pc105"
[ 250.850] Option "xkb_layout" "fr"
[ 250.850] Option "_source" "server/udev"
[ 250.850] Option "name" "Sony Vaio Keys"
[ 250.850] Option "path" "/dev/input/event7"
[ 250.850] Option "device" "/dev/input/event7"
[ 250.850] Option "xkb_variant" "latin9"
[ 250.850] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8/event7"
[ 250.850] Option "driver" "evdev"
[ 250.850] (**) Sony Vaio Keys: always reports core events
[ 250.850] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event7"
[ 250.850] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 250.850] (--) evdev: Sony Vaio Keys: Found keys
[ 250.850] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 250.851] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8/event7"
[ 250.851] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 250.851] (**) Option "xkb_rules" "evdev"
[ 250.851] (**) Option "xkb_model" "pc105"
[ 250.851] (**) Option "xkb_layout" "fr"
[ 250.851] (**) Option "xkb_variant" "latin9"
[ 250.851] (II) XKB: Reusing cached keymap
[ 250.851] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event8)
[ 250.851] (II) No input driver specified, ignoring this device.
[ 250.851] (II) This device may have been added with another device file.
[ 250.851] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse2)
[ 250.851] (II) No input driver specified, ignoring this device.
[ 250.851] (II) This device may have been added with another device file.
[ 250.852] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 250.852] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 250.852] (II) Using input driver 'evdev' for 'Power Button'
[ 250.852] Option "XkbRules" "evdev"
[ 250.852] Option "xkb_model" "pc105"
[ 250.852] Option "xkb_layout" "fr"
[ 250.852] Option "_source" "server/udev"
[ 250.852] Option "name" "Power Button"
[ 250.852] Option "path" "/dev/input/event5"
[ 250.852] Option "device" "/dev/input/event5"
[ 250.852] Option "xkb_variant" "latin9"
[ 250.852] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event5"
[ 250.852] Option "driver" "evdev"
[ 250.852] (**) Power Button: always reports core events
[ 250.852] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 250.852] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 250.852] (--) evdev: Power Button: Found keys
[ 250.852] (II) evdev: Power Button: Configuring as keyboard
[ 250.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event5"
[ 250.852] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 250.852] (**) Option "xkb_rules" "evdev"
[ 250.852] (**) Option "xkb_model" "pc105"
[ 250.852] (**) Option "xkb_layout" "fr"
[ 250.852] (**) Option "xkb_variant" "latin9"
[ 250.852] (II) XKB: Reusing cached keymap
[ 250.853] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 250.853] (II) No input driver specified, ignoring this device.
[ 250.853] (II) This device may have been added with another device file.
[ 250.853] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 250.853] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event13)
[ 250.853] (II) No input driver specified, ignoring this device.
[ 250.853] (II) This device may have been added with another device file.
[ 250.853] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 250.853] (II) No input driver specified, ignoring this device.
[ 250.853] (II) This device may have been added with another device file.
[ 250.854] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 250.854] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 250.854] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 250.854] Option "XkbRules" "evdev"
[ 250.854] Option "xkb_model" "pc105"
[ 250.854] Option "xkb_layout" "fr"
[ 250.854] Option "_source" "server/udev"
[ 250.854] Option "name" "Logitech USB Receiver"
[ 250.854] Option "path" "/dev/input/event1"
[ 250.854] Option "device" "/dev/input/event1"
[ 250.854] Option "xkb_variant" "latin9"
[ 250.854] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1"
[ 250.854] Option "driver" "evdev"
[ 250.854] (**) Logitech USB Receiver: always reports core events
[ 250.854] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 250.854] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc529
[ 250.854] (--) evdev: Logitech USB Receiver: Found keys
[ 250.854] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 250.854] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1"
[ 250.854] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 250.854] (**) Option "xkb_rules" "evdev"
[ 250.854] (**) Option "xkb_model" "pc105"
[ 250.854] (**) Option "xkb_layout" "fr"
[ 250.854] (**) Option "xkb_variant" "latin9"
[ 250.854] (II) XKB: Reusing cached keymap
[ 250.855] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 250.855] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 250.855] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 250.855] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 250.855] Option "XkbRules" "evdev"
[ 250.855] Option "xkb_model" "pc105"
[ 250.855] Option "xkb_layout" "fr"
[ 250.855] Option "_source" "server/udev"
[ 250.855] Option "name" "Logitech USB Receiver"
[ 250.855] Option "path" "/dev/input/event2"
[ 250.855] Option "device" "/dev/input/event2"
[ 250.855] Option "xkb_variant" "latin9"
[ 250.855] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2"
[ 250.855] Option "driver" "evdev"
[ 250.855] (**) Logitech USB Receiver: always reports core events
[ 250.855] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 250.855] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [652..1]
[ 250.855] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc529
[ 250.855] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 250.855] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 250.855] (--) evdev: Logitech USB Receiver: Found relative axes
[ 250.855] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 250.855] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 250.855] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 250.855] (--) evdev: Logitech USB Receiver: Found keys
[ 250.855] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 250.855] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 250.855] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 250.855] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 250.855] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 250.855] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2"
[ 250.855] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 250.855] (**) Option "xkb_rules" "evdev"
[ 250.855] (**) Option "xkb_model" "pc105"
[ 250.855] (**) Option "xkb_layout" "fr"
[ 250.855] (**) Option "xkb_variant" "latin9"
[ 250.855] (II) XKB: Reusing cached keymap
[ 250.856] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 250.856] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 250.856] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 250.856] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 250.856] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 250.856] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 250.856] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 250.856] (II) No input driver specified, ignoring this device.
[ 250.856] (II) This device may have been added with another device file.
[ 250.857] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 250.857] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 250.857] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 250.857] Option "XkbRules" "evdev"
[ 250.857] Option "XkbModel" "pc104"
[ 250.857] Option "XkbLayout" "us"
[ 250.857] Option "_source" "server/udev"
[ 250.857] Option "name" "Logitech USB Receiver"
[ 250.857] Option "path" "/dev/input/event3"
[ 250.857] Option "device" "/dev/input/event3"
[ 250.857] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3"
[ 250.857] Option "driver" "evdev"
[ 250.857] (**) Logitech USB Receiver: always reports core events
[ 250.857] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 250.857] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 250.857] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 250.857] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 250.857] (--) evdev: Logitech USB Receiver: Found relative axes
[ 250.857] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 250.857] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 250.857] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 250.857] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 250.857] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 250.857] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3"
[ 250.857] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 250.857] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 250.857] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 250.857] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 250.857] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 250.857] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 250.858] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 250.858] (II) No input driver specified, ignoring this device.
[ 250.858] (II) This device may have been added with another device file.
[ 250.858] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 250.858] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 250.858] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 250.858] Option "XkbRules" "evdev"
[ 250.858] Option "xkb_model" "pc105"
[ 250.858] Option "xkb_layout" "fr"
[ 250.858] Option "_source" "server/udev"
[ 250.858] Option "name" "Logitech USB Receiver"
[ 250.858] Option "path" "/dev/input/event4"
[ 250.858] Option "device" "/dev/input/event4"
[ 250.858] Option "xkb_variant" "latin9"
[ 250.858] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4"
[ 250.858] Option "driver" "evdev"
[ 250.858] (**) Logitech USB Receiver: always reports core events
[ 250.858] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 250.858] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [652..1]
[ 250.858] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 250.858] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 250.858] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 250.858] (--) evdev: Logitech USB Receiver: Found relative axes
[ 250.858] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 250.858] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 250.858] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 250.858] (--) evdev: Logitech USB Receiver: Found keys
[ 250.858] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 250.858] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 250.858] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 250.858] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 250.858] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 250.858] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4"
[ 250.858] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 250.858] (**) Option "xkb_rules" "evdev"
[ 250.859] (**) Option "xkb_model" "pc105"
[ 250.859] (**) Option "xkb_layout" "fr"
[ 250.859] (**) Option "xkb_variant" "latin9"
[ 250.859] (II) XKB: Reusing cached keymap
[ 250.859] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 250.859] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 250.859] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 250.859] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 250.859] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 250.859] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 250.859] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 250.859] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 250.859] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 250.859] Option "XkbRules" "evdev"
[ 250.859] Option "xkb_model" "pc105"
[ 250.859] Option "xkb_layout" "fr"
[ 250.859] Option "_source" "server/udev"
[ 250.859] Option "name" "Logitech USB Receiver"
[ 250.859] Option "path" "/dev/input/event10"
[ 250.859] Option "device" "/dev/input/event10"
[ 250.860] Option "xkb_variant" "latin9"
[ 250.860] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10"
[ 250.860] Option "driver" "evdev"
[ 250.860] (**) Logitech USB Receiver: always reports core events
[ 250.860] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event10"
[ 250.860] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc50c
[ 250.860] (--) evdev: Logitech USB Receiver: Found keys
[ 250.860] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 250.860] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10"
[ 250.860] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 250.860] (**) Option "xkb_rules" "evdev"
[ 250.860] (**) Option "xkb_model" "pc105"
[ 250.860] (**) Option "xkb_layout" "fr"
[ 250.860] (**) Option "xkb_variant" "latin9"
[ 250.860] (II) XKB: Reusing cached keymap
[ 250.860] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 250.860] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 250.861] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 250.861] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 250.861] Option "XkbRules" "evdev"
[ 250.861] Option "xkb_model" "pc105"
[ 250.861] Option "xkb_layout" "fr"
[ 250.861] Option "_source" "server/udev"
[ 250.861] Option "name" "Logitech USB Receiver"
[ 250.861] Option "path" "/dev/input/event11"
[ 250.861] Option "device" "/dev/input/event11"
[ 250.861] Option "xkb_variant" "latin9"
[ 250.861] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11"
[ 250.861] Option "driver" "evdev"
[ 250.861] (**) Logitech USB Receiver: always reports core events
[ 250.861] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event11"
[ 250.861] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [4173..1]
[ 250.861] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc50c
[ 250.861] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 250.861] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 250.861] (--) evdev: Logitech USB Receiver: Found relative axes
[ 250.861] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 250.861] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 250.861] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 250.861] (--) evdev: Logitech USB Receiver: Found keys
[ 250.861] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 250.861] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 250.861] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 250.861] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 250.861] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 250.861] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11"
[ 250.861] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 14)
[ 250.861] (**) Option "xkb_rules" "evdev"
[ 250.861] (**) Option "xkb_model" "pc105"
[ 250.861] (**) Option "xkb_layout" "fr"
[ 250.861] (**) Option "xkb_variant" "latin9"
[ 250.861] (II) XKB: Reusing cached keymap
[ 250.861] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 250.861] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 250.861] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 250.861] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 250.861] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 250.861] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 250.862] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse3)
[ 250.862] (II) No input driver specified, ignoring this device.
[ 250.862] (II) This device may have been added with another device file.
[ 250.862] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 250.862] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 250.862] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 250.862] Option "XkbRules" "evdev"
[ 250.862] Option "xkb_model" "pc105"
[ 250.862] Option "xkb_layout" "fr"
[ 250.862] Option "_source" "server/udev"
[ 250.862] Option "name" "AT Translated Set 2 keyboard"
[ 250.862] Option "path" "/dev/input/event0"
[ 250.862] Option "device" "/dev/input/event0"
[ 250.862] Option "xkb_variant" "latin9"
[ 250.862] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 250.862] Option "driver" "evdev"
[ 250.862] (**) AT Translated Set 2 keyboard: always reports core events
[ 250.862] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 250.862] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 250.862] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 250.862] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 250.862] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 250.862] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 250.862] (**) Option "xkb_rules" "evdev"
[ 250.862] (**) Option "xkb_model" "pc105"
[ 250.863] (**) Option "xkb_layout" "fr"
[ 250.863] (**) Option "xkb_variant" "latin9"
[ 250.863] (II) XKB: Reusing cached keymap
[ 250.863] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event16)
[ 250.863] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 250.863] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 250.863] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 250.863] (II) LoadModule: "synaptics"
[ 250.863] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 250.863] (II) Module synaptics: vendor="X.Org Foundation"
[ 250.863] compiled for 1.15.0, module version = 1.7.3
[ 250.863] Module class: X.Org XInput Driver
[ 250.863] ABI class: X.Org XInput driver, version 20.0
[ 250.863] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 250.863] Option "_source" "server/udev"
[ 250.863] Option "name" "AlpsPS/2 ALPS GlidePoint"
[ 250.863] Option "path" "/dev/input/event16"
[ 250.863] Option "device" "/dev/input/event16"
[ 250.863] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event16"
[ 250.863] Option "driver" "synaptics"
[ 250.863] Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 250.863] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 250.864] (**) Option "Device" "/dev/input/event16"
[ 250.996] (**) Option "Device" "/dev/input/event16"
[ 250.996] port opened successfully
[ 250.996] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 250.997] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 250.997] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 250.997] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 250.997] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 250.997] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 250.997] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 250.997] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 250.997] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 251.086] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event16"
[ 251.086] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 16)
[ 251.086] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 251.086] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 251.086] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 251.087] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 251.087] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 251.087] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 251.087] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 251.087] (**) Option "Device" "/dev/input/event16"
[ 251.087] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 251.088] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse5)
[ 251.088] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 251.088] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event15)
[ 251.088] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 251.089] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 251.089] Option "XkbRules" "evdev"
[ 251.089] Option "XkbModel" "pc104"
[ 251.089] Option "XkbLayout" "us"
[ 251.089] Option "_source" "server/udev"
[ 251.089] Option "name" "ALPS PS/2 Device"
[ 251.089] Option "path" "/dev/input/event15"
[ 251.089] Option "device" "/dev/input/event15"
[ 251.089] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event15"
[ 251.089] Option "driver" "evdev"
[ 251.089] (**) ALPS PS/2 Device: always reports core events
[ 251.089] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event15"
[ 251.089] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 251.089] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 251.089] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 251.089] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 251.089] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 251.089] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 251.089] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 251.089] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event15"
[ 251.089] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 17)
[ 251.089] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 251.090] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 251.090] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 251.090] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 251.090] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 251.091] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse4)
[ 251.091] (II) No input driver specified, ignoring this device.
[ 251.091] (II) This device may have been added with another device file.
[ 251.091] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 251.091] (II) No input driver specified, ignoring this device.
[ 251.091] (II) This device may have been added with another device file.
[ 251.093] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event17)
[ 251.093] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 251.093] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 251.093] Option "XkbRules" "evdev"
[ 251.093] Option "xkb_model" "pc105"
[ 251.093] Option "xkb_layout" "fr"
[ 251.093] Option "_source" "server/udev"
[ 251.093] Option "name" "ACPI Virtual Keyboard Device"
[ 251.093] Option "path" "/dev/input/event17"
[ 251.093] Option "device" "/dev/input/event17"
[ 251.093] Option "xkb_variant" "latin9"
[ 251.093] Option "config_info" "udev:/sys/devices/virtual/input/input18/event17"
[ 251.093] Option "driver" "evdev"
[ 251.093] (**) ACPI Virtual Keyboard Device: always reports core events
[ 251.093] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event17"
[ 251.093] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 251.093] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 251.093] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 251.093] (**) Option "config_info" "udev:/sys/devices/virtual/input/input18/event17"
[ 251.094] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 18)
[ 251.094] (**) Option "xkb_rules" "evdev"
[ 251.094] (**) Option "xkb_model" "pc105"
[ 251.094] (**) Option "xkb_layout" "fr"
[ 251.094] (**) Option "xkb_variant" "latin9"
[ 251.094] (II) XKB: Reusing cached keymap
[ 251.568] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 252.344] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 252.344] (II) intel(0): Using EDID range info for horizontal sync
[ 252.344] (II) intel(0): Using EDID range info for vertical refresh
[ 252.344] (II) intel(0): Printing DDC gathered Modelines:
[ 252.344] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 252.344] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 252.344] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 252.344] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 252.344] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 252.344] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 252.344] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 252.345] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 252.345] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 252.345] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 252.345] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 260.596] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 260.596] (II) intel(0): Using hsync ranges from config file
[ 260.596] (II) intel(0): Using vrefresh ranges from config file
[ 260.596] (II) intel(0): Printing DDC gathered Modelines:
[ 260.596] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 260.596] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 260.596] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 260.596] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 260.596] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 260.596] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 260.596] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 260.597] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 260.597] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 260.597] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 260.597] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 261.160] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 261.160] (II) intel(0): Using hsync ranges from config file
[ 261.160] (II) intel(0): Using vrefresh ranges from config file
[ 261.160] (II) intel(0): Printing DDC gathered Modelines:
[ 261.160] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 261.160] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 261.160] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 261.160] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 261.160] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 261.160] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 261.160] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 261.160] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 261.160] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 261.160] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 261.160] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 261.312] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 261.312] (II) intel(0): Using hsync ranges from config file
[ 261.312] (II) intel(0): Using vrefresh ranges from config file
[ 261.312] (II) intel(0): Printing DDC gathered Modelines:
[ 261.312] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 261.312] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 261.312] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 261.312] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 261.312] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 261.312] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 261.312] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 261.312] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 261.312] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 261.312] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 261.312] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_01
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b 0 0 0 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=479035
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17/event14
N: input/event14
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17/event14
E: DMI_VENDOR=Sony Corporation
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=479133
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8
E: EV=13
E: ID_FOR_SEAT=input-acpi-SNY6001_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY6001:00
E: ID_PATH_TAG=acpi-SNY6001_00
E: KEY=1f d6070000 c 0 100100 0 2 0 600f 102c00 3800002 40300400 e0000 0 0 0
E: MODALIAS=input:b0010v104Dp0000e0000-e0,1,4,k71,72,73,8A,94,95,9E,A1,B7,B8,B9,CA,CB,CD,D4,E0,E1,E2,E3,ED,EE,121,168,174,1A2,1A3,1D0,1D1,1D2,1D9,1DA,1DC,1DE,1DF,1E0,1E1,1E2,1E3,1E4,ram4,lsfw
E: MSC=10
E: NAME="Sony Vaio Keys"
E: PRODUCT=10/104d/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=22433
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8/event7
E: DMI_VENDOR=Sony Corporation
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-SNY6001:00
E: ID_PATH_TAG=acpi-SNY6001_00
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=99968
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input9
E: EV=7
E: ID_FOR_SEAT=input-acpi-SNY6001_00
E: ID_INPUT=1
E: ID_PATH=acpi-SNY6001:00
E: ID_PATH_TAG=acpi-SNY6001_00
E: KEY=40000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0010v104Dp0000e0000-e0,1,2,k112,r8,amlsfw
E: NAME="Sony Vaio Jogdial"
E: PRODUCT=10/104d/0/0
E: PROP=0
E: REL=100
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=23434
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input9/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input9/event8
E: ID_INPUT=1
E: ID_PATH=acpi-SNY6001:00
E: ID_PATH_TAG=acpi-SNY6001_00
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=899
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input9/mouse2
N: input/mouse2
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input9/mouse2
E: ID_INPUT=1
E: ID_PATH=acpi-SNY6001:00
E: ID_PATH_TAG=acpi-SNY6001_00
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=24494
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=43588
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event5
E: DMI_VENDOR=Sony Corporation
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=98047
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=45121
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7/event6
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=99004
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=805545
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=805617
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=805394
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=805470
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_1-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c529
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0711
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
E: LED=1f
E: MODALIAS=input:b0003v046DpC529e0111-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.1-1/input0"
E: PRODUCT=3/46d/c529/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=14234
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Receiver-event-kbd
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-kbd
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c529
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0711
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=93997
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3
E: ABS=1 0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_1-usb-0_1_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c529
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_1
E: ID_REVISION=0711
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=837fff 72ff32d bf544446 0 0 ffff0001 20f94 8b17c000 6773fa d941dfed 9ed680 4400 0 10000002
E: MODALIAS=input:b0003v046DpC529e0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E2,E4,E7,E8,E9,EA,EB,F1,100,110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,r0,1,6,7,8,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.1-1/input1"
E: PRODUCT=3/46d/c529/111
E: PROP=0
E: REL=1c3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=14423
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2
N: input/event2
S: input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-event-mouse
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c529
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_1
E: ID_REVISION=0711
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=95110
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-if01-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if01-mouse /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c529
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_1
E: ID_REVISION=0711
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14465
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_1_3_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c526
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_3_1_0
E: ID_REVISION=0500
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0003v046DpC526e0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.7-1.3/input0"
E: PRODUCT=3/46d/c526/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=15163
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3
N: input/event3
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:1.3:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:1.3:1.0-event-mouse
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c526
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_3_1_0
E: ID_REVISION=0500
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=96154
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/mouse1
N: input/mouse1
S: input/by-id/usb-Logitech_USB_Receiver-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:1.3:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:1.3:1.0-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/mouse1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c526
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_3_1_0
E: ID_REVISION=0500
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=15223
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5
E: ABS=1 0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_1_3_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c526
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.3:1.1
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_3_1_1
E: ID_REVISION=0500
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=4837fff 72ff32d bf544446 0 0 1 20f94 8b17c000 6773fa d9415fed 9ed680 4400 0 10000002
E: MODALIAS=input:b0003v046DpC526e0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E2,E4,E7,E8,E9,EA,EB,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.7-1.3/input1"
E: PRODUCT=3/46d/c526/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=15474
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4
N: input/event4
S: input/by-id/usb-Logitech_USB_Receiver-event-if01
S: input/by-path/pci-0000:00:1d.7-usb-0:1.3:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-if01 /dev/input/by-path/pci-0000:00:1d.7-usb-0:1.3:1.1-event
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c526
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.3:1.1
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_3_1_1
E: ID_REVISION=0500
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=97070
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_1_4_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c50c
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.4:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_4_1_0
E: ID_REVISION=2240
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
E: LED=1f
E: MODALIAS=input:b0003v046DpC50Ce0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.7-1.4/input0"
E: PRODUCT=3/46d/c50c/110
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=477381
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10
N: input/event10
S: input/by-id/usb-Logitech_USB_Receiver-event-kbd
S: input/by-path/pci-0000:00:1d.7-usb-0:1.4:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd /dev/input/by-path/pci-0000:00:1d.7-usb-0:1.4:1.0-event-kbd
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c50c
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.4:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_4_1_0
E: ID_REVISION=2240
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=477447
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12
E: ABS=1 0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_1_4_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c50c
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.4:1.1
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_4_1_1
E: ID_REVISION=2240
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=c0000000 4837fff 72ff32d bf5c4447 0 0 ff0001 20f94 8b37cc00 6773fe dd71dfed 9ed680 4400 0 10000002
E: MODALIAS=input:b0003v046DpC50Ce0110-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,8F,90,94,95,96,98,9A,9B,9C,9E,9F,A1,A2,A3,A4,A5,A6,A7,A8,A9,AC,AD,AE,B0,B1,B2,B5,B6,CA,CB,CE,CF,D0,D1,D2,D4,D5,D8,D9,DB,DF,E2,E4,E7,E8,E9,EA,EB,F1,100,110,111,112,113,114,115,116,117,160,161,162,166,16A,16E,172,173,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,1DE,1DF,r0,1,6,7,8,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:1d.7-1.4/input1"
E: PRODUCT=3/46d/c50c/110
E: PROP=0
E: REL=1c3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=479005
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11
N: input/event11
S: input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:1.4:1.1-event-mouse
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:1.4:1.1-event-mouse
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c50c
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.4:1.1
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_4_1_1
E: ID_REVISION=2240
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=479127
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/mouse3
N: input/mouse3
S: input/by-id/usb-Logitech_USB_Receiver-if01-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:1.4:1.1-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if01-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:1.4:1.1-mouse
E: DEVNAME=/dev/input/mouse3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/mouse3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c50c
E: ID_PATH=pci-0000:00:1d.7-usb-0:1.4:1.1
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_1_4_1_1
E: ID_REVISION=2240
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=35
E: SUBSYSTEM=input
E: USEC_INITIALIZED=479066
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=27017
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=Sony Corporation
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=92920
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
P: /devices/platform/i8042/serio1/input/input13
E: ABS=1000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input13
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=420 0 70000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0011v0002p0008e0200-e0,1,3,k110,111,112,145,14A,ra0,1,18,mlsfw
E: NAME="AlpsPS/2 ALPS GlidePoint"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/8/200
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=661323
P: /devices/platform/i8042/serio1/input/input13/event16
N: input/event16
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/platform/i8042/serio1/input/input13/event16
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=661442
P: /devices/platform/i8042/serio1/input/input13/mouse5
N: input/mouse5
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse5
E: DEVPATH=/devices/platform/i8042/serio1/input/input13/mouse5
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=37
E: SUBSYSTEM=input
E: USEC_INITIALIZED=661417
P: /devices/platform/i8042/serio1/input/input16
E: DEVPATH=/devices/platform/i8042/serio1/input/input16
E: EV=7
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=70000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0011v0002p0008e0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="ALPS PS/2 Device"
E: PHYS="isa0060/serio1/input1"
E: PRODUCT=11/2/8/0
E: PROP=0
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=645683
P: /devices/platform/i8042/serio1/input/input16/event15
N: input/event15
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/platform/i8042/serio1/input/input16/event15
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=645833
P: /devices/platform/i8042/serio1/input/input16/mouse4
N: input/mouse4
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse4
E: DEVPATH=/devices/platform/i8042/serio1/input/input16/mouse4
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=36
E: SUBSYSTEM=input
E: USEC_INITIALIZED=645807
P: /devices/platform/pcspkr/input/input10
E: DEVPATH=/devices/platform/pcspkr/input/input10
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=78271
P: /devices/platform/pcspkr/input/input10/event9
N: input/event9
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/platform/pcspkr/input/input10/event9
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1881
P: /devices/virtual/input/input18
E: DEVPATH=/devices/virtual/input/input18
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=21912
P: /devices/virtual/input/input18/event17
N: input/event17
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/virtual/input/input18/event17
E: DMI_VENDOR=Sony Corporation
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=22550
E: XKBLAYOUT=fr
E: XKBMODEL=pc105
E: XKBVARIANT=latin9
DRM Information from dmesg:
---------------------------
[ 0.897804] Linux agpgart interface v0.103
[ 0.897946] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.897997] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.898498] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.898650] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 9.174048] [drm] Initialized drm 1.1.0 20060810
[ 10.655810] [drm] Memory usable by graphics device = 512M
[ 10.680164] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.680167] [drm] Driver supports precise vblank timestamp query.
[ 10.685217] [drm] initialized overlay support
[ 10.795575] fbcon: inteldrmfb (fb0) is primary device
[ 11.476931] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.478971] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.14-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii libc6 2.18-5
ii virtualbox-guest-x11 [xorg-driver-video] 4.3.10-dfsg-1
ii x11-xkb-utils 7.7+1
ii xkb-data 2.11-1
ii xserver-xorg-core 2:1.15.1-1
ii xserver-xorg-input-all 1:7.7+7
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.8.2-1+b1
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.0-1+b2
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.7.3-1+b1
ii xserver-xorg-input-vmmouse [xorg-driver-input] 1:13.0.0-1+b2
ii xserver-xorg-input-wacom [xorg-driver-input] 0.23.0+20131011-1+b1
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.3.0-1+b1
ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.2-2
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b1
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.21.15-2+b1
ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.4-1+b2
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.3-2
ii xserver-xorg-video-modesetting [xorg-driver-video] 0.8.1-2
ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.8-1+b1
ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.3.3-1+b1
ii xserver-xorg-video-r128 [xorg-driver-video] 6.9.2-1+b1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.3.0-1+b1
ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.7-2+b1
ii xserver-xorg-video-siliconmotion [xorg-driver-video] 1:1.7.7-2+b1
ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.6-2+b1
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.5-1+b1
ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.6-2+b1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.3-1+b2
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.0.2-2
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 10.1.2-1
xserver-xorg suggests no packages.
-- no debconf information
[ 40.369]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 40.370] X Protocol Version 11, Revision 0
[ 40.370] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 40.370] Current Operating System: Linux Dexter 3.14-1-686-pae #1 SMP Debian 3.14.4-1 (2014-05-13) i686
[ 40.370] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-686-pae root=UUID=cff90031-f660-49c4-88b7-80620f940cdb ro splash quiet
[ 40.370] Build Date: 15 April 2014 07:46:36PM
[ 40.370] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 40.370] Current version of pixman: 0.32.4
[ 40.370] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 40.370] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 40.370] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 24 16:06:29 2014
[ 40.502] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 40.611] (==) No Layout section. Using the first Screen section.
[ 40.611] (==) No screen section available. Using defaults.
[ 40.611] (**) |-->Screen "Default Screen Section" (0)
[ 40.611] (**) | |-->Monitor "<default monitor>"
[ 40.640] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 40.640] (==) Automatically adding devices
[ 40.640] (==) Automatically enabling devices
[ 40.640] (==) Automatically adding GPU devices
[ 40.840] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 40.840] Entry deleted from font path.
[ 40.933] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 40.933] Entry deleted from font path.
[ 40.995] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 40.995] Entry deleted from font path.
[ 40.995] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[ 40.995] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 40.995] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 40.995] (II) Loader magic: 0xb77cb6c0
[ 40.995] (II) Module ABI versions:
[ 40.995] X.Org ANSI C Emulation: 0.4
[ 40.995] X.Org Video Driver: 15.0
[ 40.995] X.Org XInput driver : 20.0
[ 40.995] X.Org Server Extension : 8.0
[ 40.995] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 40.997] (--) PCI:*(0:0:2:0) 8086:2a02:104d:9008 rev 12, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 40.997] (--) PCI: (0:0:2:1) 8086:2a03:104d:9008 rev 12, Mem @ 0xfc100000/1048576
[ 41.023] Initializing built-in extension Generic Event Extension
[ 41.023] Initializing built-in extension SHAPE
[ 41.023] Initializing built-in extension MIT-SHM
[ 41.023] Initializing built-in extension XInputExtension
[ 41.024] Initializing built-in extension XTEST
[ 41.024] Initializing built-in extension BIG-REQUESTS
[ 41.024] Initializing built-in extension SYNC
[ 41.024] Initializing built-in extension XKEYBOARD
[ 41.024] Initializing built-in extension XC-MISC
[ 41.024] Initializing built-in extension SECURITY
[ 41.024] Initializing built-in extension XINERAMA
[ 41.024] Initializing built-in extension XFIXES
[ 41.024] Initializing built-in extension RENDER
[ 41.024] Initializing built-in extension RANDR
[ 41.024] Initializing built-in extension COMPOSITE
[ 41.024] Initializing built-in extension DAMAGE
[ 41.024] Initializing built-in extension MIT-SCREEN-SAVER
[ 41.024] Initializing built-in extension DOUBLE-BUFFER
[ 41.024] Initializing built-in extension RECORD
[ 41.024] Initializing built-in extension DPMS
[ 41.024] Initializing built-in extension Present
[ 41.024] Initializing built-in extension DRI3
[ 41.024] Initializing built-in extension X-Resource
[ 41.024] Initializing built-in extension XVideo
[ 41.024] Initializing built-in extension XVideo-MotionCompensation
[ 41.024] Initializing built-in extension SELinux
[ 41.024] Initializing built-in extension XFree86-VidModeExtension
[ 41.024] Initializing built-in extension XFree86-DGA
[ 41.024] Initializing built-in extension XFree86-DRI
[ 41.024] Initializing built-in extension DRI2
[ 41.024] (II) LoadModule: "glx"
[ 41.128] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 41.295] (II) Module glx: vendor="X.Org Foundation"
[ 41.295] compiled for 1.15.1, module version = 1.0.0
[ 41.295] ABI class: X.Org Server Extension, version 8.0
[ 41.295] (==) AIGLX enabled
[ 41.295] Loading extension GLX
[ 41.295] (==) Matched intel as autoconfigured driver 0
[ 41.295] (==) Matched intel as autoconfigured driver 1
[ 41.295] (==) Matched modesetting as autoconfigured driver 2
[ 41.295] (==) Matched fbdev as autoconfigured driver 3
[ 41.295] (==) Matched vesa as autoconfigured driver 4
[ 41.295] (==) Assigned the driver to the xf86ConfigLayout
[ 41.295] (II) LoadModule: "intel"
[ 41.319] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 41.567] (II) Module intel: vendor="X.Org Foundation"
[ 41.567] compiled for 1.15.0, module version = 2.21.15
[ 41.567] Module class: X.Org Video Driver
[ 41.567] ABI class: X.Org Video Driver, version 15.0
[ 41.567] (II) LoadModule: "modesetting"
[ 41.567] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 41.632] (II) Module modesetting: vendor="X.Org Foundation"
[ 41.632] compiled for 1.15.1, module version = 0.8.1
[ 41.632] Module class: X.Org Video Driver
[ 41.632] ABI class: X.Org Video Driver, version 15.0
[ 41.632] (II) LoadModule: "fbdev"
[ 41.632] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 41.656] (II) Module fbdev: vendor="X.Org Foundation"
[ 41.656] compiled for 1.15.0, module version = 0.4.4
[ 41.656] Module class: X.Org Video Driver
[ 41.656] ABI class: X.Org Video Driver, version 15.0
[ 41.656] (II) LoadModule: "vesa"
[ 41.656] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 41.669] (II) Module vesa: vendor="X.Org Foundation"
[ 41.669] compiled for 1.15.0, module version = 2.3.3
[ 41.669] Module class: X.Org Video Driver
[ 41.669] ABI class: X.Org Video Driver, version 15.0
[ 41.669] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 41.693] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 41.693] (II) FBDEV: driver for framebuffer: fbdev
[ 41.693] (II) VESA: driver for VESA chipsets: vesa
[ 41.693] (++) using VT number 7
[ 41.732] (WW) Falling back to old probe method for modesetting
[ 41.732] (WW) Falling back to old probe method for fbdev
[ 41.732] (II) Loading sub module "fbdevhw"
[ 41.732] (II) LoadModule: "fbdevhw"
[ 41.732] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 41.857] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 41.857] compiled for 1.15.1, module version = 0.0.2
[ 41.857] ABI class: X.Org Video Driver, version 15.0
[ 41.857] (WW) Falling back to old probe method for vesa
[ 41.858] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 41.858] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 41.858] (==) intel(0): RGB weight 888
[ 41.858] (==) intel(0): Default visual is TrueColor
[ 41.858] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 41.858] (**) intel(0): Relaxed fencing enabled
[ 41.858] (**) intel(0): Wait on SwapBuffers? enabled
[ 41.858] (**) intel(0): Triple buffering? enabled
[ 41.858] (**) intel(0): Framebuffer tiled
[ 41.858] (**) intel(0): Pixmaps tiled
[ 41.858] (**) intel(0): 3D buffers tiled
[ 41.858] (**) intel(0): SwapBuffers wait enabled
[ 41.858] (==) intel(0): video overlay key set to 0x101fe
[ 41.858] (II) intel(0): Output LVDS1 has no monitor section
[ 41.858] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 41.956] (II) intel(0): Output VGA1 has no monitor section
[ 41.956] (II) intel(0): EDID for output LVDS1
[ 41.956] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 41.956] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 41.956] (II) intel(0): Printing probed modes for output LVDS1
[ 41.956] (II) intel(0): Modeline "1280x800"x60.0 70.59 1280 1344 1408 1453 800 804 806 810 -hsync -vsync (48.6 kHz P)
[ 41.956] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 41.956] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 41.956] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 41.956] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 42.056] (II) intel(0): EDID for output VGA1
[ 42.056] (II) intel(0): Manufacturer: SAM Model: 529 Serial#: 1162228275
[ 42.056] (II) intel(0): Year: 2009 Week: 35
[ 42.056] (II) intel(0): EDID Version: 1.3
[ 42.056] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 42.056] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 42.056] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 42.056] (II) intel(0): Gamma: 2.20
[ 42.056] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 42.056] (II) intel(0): First detailed timing is preferred mode
[ 42.056] (II) intel(0): redX: 0.650 redY: 0.337 greenX: 0.295 greenY: 0.605
[ 42.056] (II) intel(0): blueX: 0.147 blueY: 0.075 whiteX: 0.312 whiteY: 0.329
[ 42.056] (II) intel(0): Supported established timings:
[ 42.056] (II) intel(0): 640x480@60Hz
[ 42.056] (II) intel(0): 800x600@56Hz
[ 42.056] (II) intel(0): 800x600@60Hz
[ 42.056] (II) intel(0): 1024x768@60Hz
[ 42.056] (II) intel(0): Manufacturer's mask: 0
[ 42.056] (II) intel(0): Supported standard timings:
[ 42.056] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 42.056] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 42.056] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 42.056] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 42.056] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 42.056] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 42.056] (II) intel(0): Supported detailed timing:
[ 42.056] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 42.056] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.056] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 42.056] (II) intel(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 42.056] (II) intel(0): Monitor name: SyncMaster
[ 42.056] (II) intel(0): Serial No: H9MS812067
[ 42.056] (II) intel(0): EDID (in hex):
[ 42.056] (II) intel(0): 00ffffffffffff004c2d290533324645
[ 42.056] (II) intel(0): 231301030e331d782a98d1a6564b9b25
[ 42.056] (II) intel(0): 1350542308008100814081809500b300
[ 42.056] (II) intel(0): a94001010101023a801871382d40582c
[ 42.056] (II) intel(0): 4500fe1f1100001e000000fd00383d1e
[ 42.056] (II) intel(0): 5111000a202020202020000000fc0053
[ 42.056] (II) intel(0): 796e634d61737465720a2020000000ff
[ 42.056] (II) intel(0): 0048394d533831323036370a202000bf
[ 42.056] (II) intel(0): Printing probed modes for output VGA1
[ 42.056] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 42.056] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 42.057] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 42.057] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 42.057] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 42.057] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 42.057] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 42.057] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 42.057] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42.057] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 42.057] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.057] (II) intel(0): Output LVDS1 connected
[ 42.057] (II) intel(0): Output VGA1 connected
[ 42.057] (II) intel(0): Using exact sizes for initial modes
[ 42.057] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 42.057] (II) intel(0): Output VGA1 using initial mode 1280x800
[ 42.057] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 42.057] (II) intel(0): Kernel page flipping support detected, enabling
[ 42.057] (==) intel(0): DPI set to (96, 96)
[ 42.057] (II) Loading sub module "fb"
[ 42.057] (II) LoadModule: "fb"
[ 42.057] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 42.125] (II) Module fb: vendor="X.Org Foundation"
[ 42.125] compiled for 1.15.1, module version = 1.0.0
[ 42.125] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42.125] (II) Loading sub module "dri2"
[ 42.125] (II) LoadModule: "dri2"
[ 42.125] (II) Module "dri2" already built-in
[ 42.125] (II) UnloadModule: "modesetting"
[ 42.125] (II) Unloading modesetting
[ 42.125] (II) UnloadModule: "fbdev"
[ 42.125] (II) Unloading fbdev
[ 42.125] (II) UnloadSubModule: "fbdevhw"
[ 42.125] (II) Unloading fbdevhw
[ 42.125] (II) UnloadModule: "vesa"
[ 42.125] (II) Unloading vesa
[ 42.125] (==) Depth 24 pixmap format is 32 bpp
[ 42.160] (II) intel(0): [DRI2] Setup complete
[ 42.160] (II) intel(0): [DRI2] DRI driver: i965
[ 42.160] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 42.272] (II) UXA(0): Driver registered support for the following operations:
[ 42.272] (II) solid
[ 42.272] (II) copy
[ 42.272] (II) composite (RENDER acceleration)
[ 42.272] (II) put_image
[ 42.272] (II) get_image
[ 42.272] (==) intel(0): Backing store enabled
[ 42.272] (==) intel(0): Silken mouse enabled
[ 42.274] (II) intel(0): Initializing HW Cursor
[ 42.274] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 42.314] (==) intel(0): DPMS enabled
[ 42.314] (==) intel(0): Intel XvMC decoder enabled
[ 42.314] (II) intel(0): Set up textured video
[ 42.314] (II) intel(0): Set up overlay video
[ 42.314] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 42.314] (II) intel(0): direct rendering: DRI2 Enabled
[ 42.314] (==) intel(0): hotplug detection: "enabled"
[ 42.380] (--) RandR disabled
[ 42.532] (II) SELinux: Disabled on system
[ 43.747] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.747] (II) AIGLX: enabled GLX_ARB_create_context
[ 43.747] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 43.747] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 43.747] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.747] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.747] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 43.747] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 43.747] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.747] (II) AIGLX: Loaded and initialized i965
[ 43.747] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.747] (II) intel(0): Setting screen physical size to 338 x 211
[ 46.181] (II) XKB: Reusing cached keymap
[ 46.184] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 46.184] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.184] (II) LoadModule: "evdev"
[ 46.184] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 46.438] (II) Module evdev: vendor="X.Org Foundation"
[ 46.438] compiled for 1.15.0, module version = 2.8.2
[ 46.438] Module class: X.Org XInput Driver
[ 46.438] ABI class: X.Org XInput driver, version 20.0
[ 46.438] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.438] Option "XkbRules" "evdev"
[ 46.438] Option "xkb_model" "pc105"
[ 46.438] Option "xkb_layout" "fr"
[ 46.438] Option "_source" "server/udev"
[ 46.438] Option "name" "Video Bus"
[ 46.438] Option "path" "/dev/input/event14"
[ 46.438] Option "device" "/dev/input/event14"
[ 46.438] Option "xkb_variant" "latin9"
[ 46.438] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17/event14"
[ 46.438] Option "driver" "evdev"
[ 46.438] (**) Video Bus: always reports core events
[ 46.438] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 46.438] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.438] (--) evdev: Video Bus: Found keys
[ 46.439] (II) evdev: Video Bus: Configuring as keyboard
[ 46.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input17/event14"
[ 46.439] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 46.439] (**) Option "xkb_rules" "evdev"
[ 46.439] (**) Option "xkb_model" "pc105"
[ 46.439] (**) Option "xkb_layout" "fr"
[ 46.439] (**) Option "xkb_variant" "latin9"
[ 46.832] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event7)
[ 46.832] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 46.832] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 46.832] Option "XkbRules" "evdev"
[ 46.832] Option "xkb_model" "pc105"
[ 46.832] Option "xkb_layout" "fr"
[ 46.832] Option "_source" "server/udev"
[ 46.832] Option "name" "Sony Vaio Keys"
[ 46.832] Option "path" "/dev/input/event7"
[ 46.832] Option "device" "/dev/input/event7"
[ 46.832] Option "xkb_variant" "latin9"
[ 46.832] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8/event7"
[ 46.832] Option "driver" "evdev"
[ 46.832] (**) Sony Vaio Keys: always reports core events
[ 46.832] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event7"
[ 46.832] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 46.832] (--) evdev: Sony Vaio Keys: Found keys
[ 46.832] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 46.832] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:39/SNY6001:00/input/input8/event7"
[ 46.832] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 7)
[ 46.832] (**) Option "xkb_rules" "evdev"
[ 46.832] (**) Option "xkb_model" "pc105"
[ 46.832] (**) Option "xkb_layout" "fr"
[ 46.832] (**) Option "xkb_variant" "latin9"
[ 46.832] (II) XKB: Reusing cached keymap
[ 46.833] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event8)
[ 46.833] (II) No input driver specified, ignoring this device.
[ 46.833] (II) This device may have been added with another device file.
[ 46.833] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse2)
[ 46.833] (II) No input driver specified, ignoring this device.
[ 46.833] (II) This device may have been added with another device file.
[ 46.833] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 46.833] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 46.833] (II) Using input driver 'evdev' for 'Power Button'
[ 46.833] Option "XkbRules" "evdev"
[ 46.833] Option "xkb_model" "pc105"
[ 46.833] Option "xkb_layout" "fr"
[ 46.833] Option "_source" "server/udev"
[ 46.833] Option "name" "Power Button"
[ 46.833] Option "path" "/dev/input/event5"
[ 46.833] Option "device" "/dev/input/event5"
[ 46.833] Option "xkb_variant" "latin9"
[ 46.833] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event5"
[ 46.833] Option "driver" "evdev"
[ 46.833] (**) Power Button: always reports core events
[ 46.833] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 46.833] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.833] (--) evdev: Power Button: Found keys
[ 46.833] (II) evdev: Power Button: Configuring as keyboard
[ 46.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event5"
[ 46.833] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 46.833] (**) Option "xkb_rules" "evdev"
[ 46.834] (**) Option "xkb_model" "pc105"
[ 46.834] (**) Option "xkb_layout" "fr"
[ 46.834] (**) Option "xkb_variant" "latin9"
[ 46.834] (II) XKB: Reusing cached keymap
[ 46.834] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 46.834] (II) No input driver specified, ignoring this device.
[ 46.834] (II) This device may have been added with another device file.
[ 46.834] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 46.835] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event13)
[ 46.835] (II) No input driver specified, ignoring this device.
[ 46.835] (II) This device may have been added with another device file.
[ 46.835] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 46.835] (II) No input driver specified, ignoring this device.
[ 46.835] (II) This device may have been added with another device file.
[ 46.835] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 46.835] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 46.835] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.835] Option "XkbRules" "evdev"
[ 46.835] Option "xkb_model" "pc105"
[ 46.835] Option "xkb_layout" "fr"
[ 46.835] Option "_source" "server/udev"
[ 46.835] Option "name" "Logitech USB Receiver"
[ 46.835] Option "path" "/dev/input/event1"
[ 46.835] Option "device" "/dev/input/event1"
[ 46.835] Option "xkb_variant" "latin9"
[ 46.835] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1"
[ 46.835] Option "driver" "evdev"
[ 46.835] (**) Logitech USB Receiver: always reports core events
[ 46.835] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 46.835] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc529
[ 46.835] (--) evdev: Logitech USB Receiver: Found keys
[ 46.835] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C529.0001/input/input2/event1"
[ 46.835] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 46.836] (**) Option "xkb_rules" "evdev"
[ 46.836] (**) Option "xkb_model" "pc105"
[ 46.836] (**) Option "xkb_layout" "fr"
[ 46.836] (**) Option "xkb_variant" "latin9"
[ 46.836] (II) XKB: Reusing cached keymap
[ 46.836] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 46.836] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 46.836] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 46.836] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.836] Option "XkbRules" "evdev"
[ 46.836] Option "xkb_model" "pc105"
[ 46.836] Option "xkb_layout" "fr"
[ 46.836] Option "_source" "server/udev"
[ 46.836] Option "name" "Logitech USB Receiver"
[ 46.836] Option "path" "/dev/input/event2"
[ 46.836] Option "device" "/dev/input/event2"
[ 46.836] Option "xkb_variant" "latin9"
[ 46.836] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2"
[ 46.836] Option "driver" "evdev"
[ 46.836] (**) Logitech USB Receiver: always reports core events
[ 46.836] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 46.836] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [652..1]
[ 46.837] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc529
[ 46.837] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 46.837] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.837] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.837] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 46.837] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 46.837] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 46.837] (--) evdev: Logitech USB Receiver: Found keys
[ 46.837] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.837] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.837] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.837] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.837] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 46.837] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C529.0002/input/input3/event2"
[ 46.837] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 46.837] (**) Option "xkb_rules" "evdev"
[ 46.837] (**) Option "xkb_model" "pc105"
[ 46.837] (**) Option "xkb_layout" "fr"
[ 46.837] (**) Option "xkb_variant" "latin9"
[ 46.837] (II) XKB: Reusing cached keymap
[ 46.837] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.837] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 46.837] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.837] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.837] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.837] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.838] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 46.838] (II) No input driver specified, ignoring this device.
[ 46.838] (II) This device may have been added with another device file.
[ 46.838] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 46.838] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 46.838] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.838] Option "XkbRules" "evdev"
[ 46.838] Option "XkbModel" "pc104"
[ 46.838] Option "XkbLayout" "us"
[ 46.838] Option "_source" "server/udev"
[ 46.838] Option "name" "Logitech USB Receiver"
[ 46.838] Option "path" "/dev/input/event3"
[ 46.838] Option "device" "/dev/input/event3"
[ 46.838] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3"
[ 46.838] Option "driver" "evdev"
[ 46.838] (**) Logitech USB Receiver: always reports core events
[ 46.838] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 46.838] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 46.838] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 46.838] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.838] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.838] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 46.838] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.838] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.838] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.838] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 46.838] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.0/0003:046D:C526.0003/input/input4/event3"
[ 46.838] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 46.838] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.839] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.839] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.839] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.839] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.839] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 46.839] (II) No input driver specified, ignoring this device.
[ 46.839] (II) This device may have been added with another device file.
[ 46.839] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 46.839] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 46.839] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.839] Option "XkbRules" "evdev"
[ 46.840] Option "xkb_model" "pc105"
[ 46.840] Option "xkb_layout" "fr"
[ 46.840] Option "_source" "server/udev"
[ 46.840] Option "name" "Logitech USB Receiver"
[ 46.840] Option "path" "/dev/input/event4"
[ 46.840] Option "device" "/dev/input/event4"
[ 46.840] Option "xkb_variant" "latin9"
[ 46.840] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4"
[ 46.840] Option "driver" "evdev"
[ 46.840] (**) Logitech USB Receiver: always reports core events
[ 46.840] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 46.840] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [652..1]
[ 46.840] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 46.840] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 46.840] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.840] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.840] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 46.840] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 46.840] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 46.840] (--) evdev: Logitech USB Receiver: Found keys
[ 46.840] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.840] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.840] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.840] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.840] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 46.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.3/7-1.3:1.1/0003:046D:C526.0004/input/input5/event4"
[ 46.840] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 46.840] (**) Option "xkb_rules" "evdev"
[ 46.840] (**) Option "xkb_model" "pc105"
[ 46.840] (**) Option "xkb_layout" "fr"
[ 46.840] (**) Option "xkb_variant" "latin9"
[ 46.840] (II) XKB: Reusing cached keymap
[ 46.840] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.840] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 46.840] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.840] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.840] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.840] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.841] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[ 46.841] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 46.841] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.841] Option "XkbRules" "evdev"
[ 46.841] Option "xkb_model" "pc105"
[ 46.841] Option "xkb_layout" "fr"
[ 46.841] Option "_source" "server/udev"
[ 46.841] Option "name" "Logitech USB Receiver"
[ 46.841] Option "path" "/dev/input/event10"
[ 46.841] Option "device" "/dev/input/event10"
[ 46.841] Option "xkb_variant" "latin9"
[ 46.841] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10"
[ 46.841] Option "driver" "evdev"
[ 46.841] (**) Logitech USB Receiver: always reports core events
[ 46.841] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event10"
[ 46.841] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc50c
[ 46.841] (--) evdev: Logitech USB Receiver: Found keys
[ 46.841] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.841] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.0/0003:046D:C50C.0005/input/input11/event10"
[ 46.841] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 46.841] (**) Option "xkb_rules" "evdev"
[ 46.841] (**) Option "xkb_model" "pc105"
[ 46.841] (**) Option "xkb_layout" "fr"
[ 46.841] (**) Option "xkb_variant" "latin9"
[ 46.841] (II) XKB: Reusing cached keymap
[ 46.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 46.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 46.842] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 46.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 46.842] Option "XkbRules" "evdev"
[ 46.842] Option "xkb_model" "pc105"
[ 46.842] Option "xkb_layout" "fr"
[ 46.842] Option "_source" "server/udev"
[ 46.842] Option "name" "Logitech USB Receiver"
[ 46.842] Option "path" "/dev/input/event11"
[ 46.842] Option "device" "/dev/input/event11"
[ 46.842] Option "xkb_variant" "latin9"
[ 46.842] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11"
[ 46.842] Option "driver" "evdev"
[ 46.842] (**) Logitech USB Receiver: always reports core events
[ 46.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event11"
[ 46.842] (--) evdev: Logitech USB Receiver: absolute axis 0x20 [4173..1]
[ 46.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc50c
[ 46.842] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 46.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 46.842] (--) evdev: Logitech USB Receiver: Found relative axes
[ 46.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 46.842] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 46.842] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 46.842] (--) evdev: Logitech USB Receiver: Found keys
[ 46.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 46.842] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 46.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 46.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 46.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 46.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.4/7-1.4:1.1/0003:046D:C50C.0006/input/input12/event11"
[ 46.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 14)
[ 46.842] (**) Option "xkb_rules" "evdev"
[ 46.842] (**) Option "xkb_model" "pc105"
[ 46.842] (**) Option "xkb_layout" "fr"
[ 46.842] (**) Option "xkb_variant" "latin9"
[ 46.843] (II) XKB: Reusing cached keymap
[ 46.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 46.843] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 46.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 46.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 46.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 46.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 46.843] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse3)
[ 46.843] (II) No input driver specified, ignoring this device.
[ 46.843] (II) This device may have been added with another device file.
[ 46.844] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 46.844] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 46.844] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 46.844] Option "XkbRules" "evdev"
[ 46.844] Option "xkb_model" "pc105"
[ 46.844] Option "xkb_layout" "fr"
[ 46.844] Option "_source" "server/udev"
[ 46.844] Option "name" "AT Translated Set 2 keyboard"
[ 46.844] Option "path" "/dev/input/event0"
[ 46.844] Option "device" "/dev/input/event0"
[ 46.844] Option "xkb_variant" "latin9"
[ 46.844] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 46.844] Option "driver" "evdev"
[ 46.844] (**) AT Translated Set 2 keyboard: always reports core events
[ 46.844] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 46.844] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 46.844] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 46.844] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 46.844] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 46.844] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 46.844] (**) Option "xkb_rules" "evdev"
[ 46.844] (**) Option "xkb_model" "pc105"
[ 46.844] (**) Option "xkb_layout" "fr"
[ 46.844] (**) Option "xkb_variant" "latin9"
[ 46.844] (II) XKB: Reusing cached keymap
[ 46.845] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event16)
[ 46.845] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 46.845] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 46.845] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 46.845] (II) LoadModule: "synaptics"
[ 46.845] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 46.929] (II) Module synaptics: vendor="X.Org Foundation"
[ 46.929] compiled for 1.15.0, module version = 1.7.3
[ 46.929] Module class: X.Org XInput Driver
[ 46.929] ABI class: X.Org XInput driver, version 20.0
[ 46.929] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 46.929] Option "_source" "server/udev"
[ 46.929] Option "name" "AlpsPS/2 ALPS GlidePoint"
[ 46.929] Option "path" "/dev/input/event16"
[ 46.929] Option "device" "/dev/input/event16"
[ 46.929] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event16"
[ 46.929] Option "driver" "synaptics"
[ 46.929] Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 46.929] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 46.929] (**) Option "Device" "/dev/input/event16"
[ 46.990] (**) Option "Device" "/dev/input/event16"
[ 46.990] port opened successfully
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 46.990] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 46.990] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 46.990] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 47.056] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event16"
[ 47.056] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 16)
[ 47.056] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 47.056] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 47.056] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 47.056] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 47.056] (**) Option "Device" "/dev/input/event16"
[ 47.056] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 47.056] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse5)
[ 47.057] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 47.057] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event15)
[ 47.057] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 47.057] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 47.057] Option "XkbRules" "evdev"
[ 47.057] Option "XkbModel" "pc104"
[ 47.057] Option "XkbLayout" "us"
[ 47.057] Option "_source" "server/udev"
[ 47.057] Option "name" "ALPS PS/2 Device"
[ 47.057] Option "path" "/dev/input/event15"
[ 47.057] Option "device" "/dev/input/event15"
[ 47.057] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event15"
[ 47.057] Option "driver" "evdev"
[ 47.057] (**) ALPS PS/2 Device: always reports core events
[ 47.057] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event15"
[ 47.057] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 47.057] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 47.057] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 47.057] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 47.057] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 47.057] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 47.057] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.057] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event15"
[ 47.057] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 17)
[ 47.057] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 47.057] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 47.057] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 47.057] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 47.057] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 47.058] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse4)
[ 47.058] (II) No input driver specified, ignoring this device.
[ 47.058] (II) This device may have been added with another device file.
[ 47.058] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[ 47.058] (II) No input driver specified, ignoring this device.
[ 47.058] (II) This device may have been added with another device file.
[ 47.058] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event17)
[ 47.059] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 47.059] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 47.059] Option "XkbRules" "evdev"
[ 47.059] Option "xkb_model" "pc105"
[ 47.059] Option "xkb_layout" "fr"
[ 47.059] Option "_source" "server/udev"
[ 47.059] Option "name" "ACPI Virtual Keyboard Device"
[ 47.059] Option "path" "/dev/input/event17"
[ 47.059] Option "device" "/dev/input/event17"
[ 47.059] Option "xkb_variant" "latin9"
[ 47.059] Option "config_info" "udev:/sys/devices/virtual/input/input18/event17"
[ 47.059] Option "driver" "evdev"
[ 47.059] (**) ACPI Virtual Keyboard Device: always reports core events
[ 47.059] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event17"
[ 47.059] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 47.059] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 47.059] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 47.059] (**) Option "config_info" "udev:/sys/devices/virtual/input/input18/event17"
[ 47.059] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 18)
[ 47.059] (**) Option "xkb_rules" "evdev"
[ 47.059] (**) Option "xkb_model" "pc105"
[ 47.059] (**) Option "xkb_layout" "fr"
[ 47.059] (**) Option "xkb_variant" "latin9"
[ 47.059] (II) XKB: Reusing cached keymap
[ 57.456] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 62.700] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 62.700] (II) intel(0): Using EDID range info for horizontal sync
[ 62.700] (II) intel(0): Using EDID range info for vertical refresh
[ 62.700] (II) intel(0): Printing DDC gathered Modelines:
[ 62.700] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 62.700] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 62.700] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 62.700] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 62.700] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 62.700] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 62.701] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 62.701] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 62.701] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 62.701] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 62.701] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 99.280] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 99.280] (II) intel(0): Using hsync ranges from config file
[ 99.280] (II) intel(0): Using vrefresh ranges from config file
[ 99.280] (II) intel(0): Printing DDC gathered Modelines:
[ 99.280] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 99.280] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 99.280] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 99.280] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 99.280] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 99.280] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 99.280] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 99.280] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 99.280] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 99.280] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 99.280] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 103.460] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 103.460] (II) intel(0): Using hsync ranges from config file
[ 103.460] (II) intel(0): Using vrefresh ranges from config file
[ 103.460] (II) intel(0): Printing DDC gathered Modelines:
[ 103.460] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 103.460] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 103.460] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 103.460] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 103.460] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 103.460] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 103.460] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 103.460] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 103.460] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 103.460] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 103.460] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 103.904] (II) intel(0): EDID vendor "SAM", prod id 1321
[ 103.904] (II) intel(0): Using hsync ranges from config file
[ 103.904] (II) intel(0): Using vrefresh ranges from config file
[ 103.904] (II) intel(0): Printing DDC gathered Modelines:
[ 103.904] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 103.904] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 103.904] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 103.904] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 103.904] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 103.904] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 103.904] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 103.904] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 103.904] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 103.904] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 103.904] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 242.829] (II) XKB: Reusing cached keymap
[ 242.829] (II) XKB: Reusing cached keymap
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/Xorg (xorg_backtrace+0x4f) [0xb7744c0f]
(EE) 1: /usr/bin/Xorg (0xb759d000+0x1ab9e4) [0xb77489e4]
(EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb757b40c]
(EE) 3: /usr/bin/Xorg (0xb759d000+0x1383e6) [0xb76d53e6]
(EE) 4: /usr/bin/Xorg (0xb759d000+0x138ce2) [0xb76d5ce2]
(EE) 5: /usr/bin/Xorg (miPointerSetPosition+0x448) [0xb772fd98]
(EE) 6: /usr/bin/Xorg (0xb759d000+0x53120) [0xb75f0120]
(EE) 7: /usr/bin/Xorg (0xb759d000+0x535b4) [0xb75f05b4]
(EE) 8: /usr/bin/Xorg (GetPointerEvents+0x154) [0xb75f1d44]
(EE) 9: /usr/bin/Xorg (QueuePointerEvents+0x4a) [0xb75f225a]
(EE) 10: /usr/bin/Xorg (xf86PostMotionEventM+0x24b) [0xb762b8cb]
(EE) 11: /usr/lib/xorg/modules/input/evdev_drv.so (0xb63e4000+0x48df) [0xb63e88df]
(EE) 12: /usr/bin/Xorg (0xb759d000+0x7e095) [0xb761b095]
(EE) 13: /usr/bin/Xorg (0xb759d000+0xa8b4b) [0xb7645b4b]
(EE) 14: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb757b400]
(EE) 15: linux-gate.so.1 (__kernel_vsyscall+0x10) [0xb757b424]
(EE) 16: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__select+0x2d) [0xb71da7dd]
(EE) 17: /usr/bin/Xorg (WaitForSomething+0x178) [0xb7741fb8]
(EE) 18: /usr/bin/Xorg (0xb759d000+0x3c88e) [0xb75d988e]
(EE) 19: /usr/bin/Xorg (0xb759d000+0x40c25) [0xb75ddc25]
(EE) 20: /usr/bin/Xorg (0xb759d000+0x2a93e) [0xb75c793e]
(EE) 21: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf3) [0xb7111a63]
(EE) 22: /usr/bin/Xorg (0xb759d000+0x2a974) [0xb75c7974]
(EE)
(EE) Segmentation fault at address 0xe8b9eb36
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) Server terminated with error (1). Closing log file.
Reply to: