Bug#772420: xorg: Error in /usr/bin/Xorg malloc() smallbin double linked list corrupted
Package: xorg
Version: 1:7.7+7
Severity: important
Dear Maintainer,
xorg crashes rather often during periods of inactivity either when on savescreen or on lid closed. I'm unable to trigger this reliably though.
The console shows the message above, with address 0x00007fb377837180.
Thanks.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 23 2010 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2397280 Nov 3 22:52 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011] (rev 02)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 7728 Dec 6 14:31 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 7728 Dec 6 14:31 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 7728 Dec 6 14:31 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 7728 Dec 6 14:31 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 7728 Dec 6 14:31 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 20525 Dec 6 17:49 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 46.135]
X.Org X Server 1.16.1.901 (1.16.2 RC 1)
Release Date: 2014-11-02
[ 46.136] X Protocol Version 11, Revision 0
[ 46.136] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 46.136] Current Operating System: Linux fox 3.16.0-4-amd64 #1 SMP Debian 3.16.7-2 (2014-11-06) x86_64
[ 46.136] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=99392638-3e9a-4366-a271-ad4fdd30bd49 ro quiet
[ 46.136] Build Date: 03 November 2014 09:44:08PM
[ 46.136] xorg-server 2:1.16.1.901-1 (http://www.debian.org/support)
[ 46.136] Current version of pixman: 0.32.6
[ 46.136] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 46.136] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 46.137] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 6 14:34:35 2014
[ 46.204] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 46.304] (==) No Layout section. Using the first Screen section.
[ 46.304] (==) No screen section available. Using defaults.
[ 46.304] (**) |-->Screen "Default Screen Section" (0)
[ 46.305] (**) | |-->Monitor "<default monitor>"
[ 46.379] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 46.379] (==) Automatically adding devices
[ 46.379] (==) Automatically enabling devices
[ 46.379] (==) Automatically adding GPU devices
[ 46.502] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 46.502] Entry deleted from font path.
[ 47.205] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 47.205] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 47.206] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 47.206] (II) Loader magic: 0x7fd0bd688d80
[ 47.206] (II) Module ABI versions:
[ 47.206] X.Org ANSI C Emulation: 0.4
[ 47.206] X.Org Video Driver: 18.0
[ 47.206] X.Org XInput driver : 21.0
[ 47.206] X.Org Server Extension : 8.0
[ 47.207] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 47.212] (--) PCI:*(0:0:2:0) 8086:a011:1043:8446 rev 2, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7d00000/1048576, I/O @ 0x0000dc00/8
[ 47.212] (--) PCI: (0:0:2:1) 8086:a012:1043:8446 rev 2, Mem @ 0xf7e80000/524288
[ 47.297] (II) LoadModule: "glx"
[ 47.425] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 50.427] (II) Module glx: vendor="X.Org Foundation"
[ 50.427] compiled for 1.16.1.901, module version = 1.0.0
[ 50.427] ABI class: X.Org Server Extension, version 8.0
[ 50.427] (==) AIGLX enabled
[ 50.428] (==) Matched intel as autoconfigured driver 0
[ 50.428] (==) Matched intel as autoconfigured driver 1
[ 50.428] (==) Matched modesetting as autoconfigured driver 2
[ 50.428] (==) Matched fbdev as autoconfigured driver 3
[ 50.428] (==) Matched vesa as autoconfigured driver 4
[ 50.428] (==) Assigned the driver to the xf86ConfigLayout
[ 50.428] (II) LoadModule: "intel"
[ 50.429] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 50.833] (II) Module intel: vendor="X.Org Foundation"
[ 50.834] compiled for 1.16.0, module version = 2.99.914
[ 50.834] Module class: X.Org Video Driver
[ 50.834] ABI class: X.Org Video Driver, version 18.0
[ 50.834] (II) LoadModule: "modesetting"
[ 50.834] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 51.017] (II) Module modesetting: vendor="X.Org Foundation"
[ 51.017] compiled for 1.15.99.903, module version = 0.9.0
[ 51.018] Module class: X.Org Video Driver
[ 51.018] ABI class: X.Org Video Driver, version 18.0
[ 51.018] (II) LoadModule: "fbdev"
[ 51.018] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 51.095] (II) Module fbdev: vendor="X.Org Foundation"
[ 51.095] compiled for 1.15.99.904, module version = 0.4.4
[ 51.095] Module class: X.Org Video Driver
[ 51.095] ABI class: X.Org Video Driver, version 18.0
[ 51.095] (II) LoadModule: "vesa"
[ 51.096] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 51.140] (II) Module vesa: vendor="X.Org Foundation"
[ 51.140] compiled for 1.15.99.904, module version = 2.3.3
[ 51.140] Module class: X.Org Video Driver
[ 51.140] ABI class: X.Org Video Driver, version 18.0
[ 51.140] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 51.355] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 51.355] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 51.355] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 51.355] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 51.355] (II) FBDEV: driver for framebuffer: fbdev
[ 51.356] (II) VESA: driver for VESA chipsets: vesa
[ 51.356] (++) using VT number 7
[ 51.412] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 51.412] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.914-1~exp1 (Vincent Cheng <vcheng@debian.org>)
[ 51.464] (WW) Falling back to old probe method for modesetting
[ 51.464] (WW) Falling back to old probe method for fbdev
[ 51.464] (II) Loading sub module "fbdevhw"
[ 51.464] (II) LoadModule: "fbdevhw"
[ 51.465] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 51.610] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 51.610] compiled for 1.16.1.901, module version = 0.0.2
[ 51.610] ABI class: X.Org Video Driver, version 18.0
[ 51.610] (WW) Falling back to old probe method for vesa
[ 51.674] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[ 51.674] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[ 51.674] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 51.675] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 51.675] (==) intel(0): RGB weight 888
[ 51.675] (==) intel(0): Default visual is TrueColor
[ 51.676] (II) intel(0): Output LVDS1 has no monitor section
[ 51.677] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 51.677] (II) intel(0): Output VGA1 has no monitor section
[ 51.677] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 51.678] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 51.678] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 1
[ 51.678] (==) intel(0): TearFree disabled
[ 51.678] (==) intel(0): DPI set to (96, 96)
[ 51.678] (II) Loading sub module "dri3"
[ 51.678] (II) LoadModule: "dri3"
[ 51.678] (II) Module "dri3" already built-in
[ 51.679] (II) Loading sub module "dri2"
[ 51.679] (II) LoadModule: "dri2"
[ 51.679] (II) Module "dri2" already built-in
[ 51.679] (II) Loading sub module "present"
[ 51.679] (II) LoadModule: "present"
[ 51.679] (II) Module "present" already built-in
[ 51.679] (II) UnloadModule: "modesetting"
[ 51.679] (II) Unloading modesetting
[ 51.680] (II) UnloadModule: "fbdev"
[ 51.680] (II) Unloading fbdev
[ 51.680] (II) UnloadSubModule: "fbdevhw"
[ 51.680] (II) Unloading fbdevhw
[ 51.681] (II) UnloadModule: "vesa"
[ 51.681] (II) Unloading vesa
[ 51.681] (==) Depth 24 pixmap format is 32 bpp
[ 52.056] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 52.056] (==) intel(0): Backing store enabled
[ 52.056] (==) intel(0): Silken mouse enabled
[ 52.057] (II) intel(0): HW Cursor enabled
[ 52.057] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 52.059] (==) intel(0): DPMS enabled
[ 52.084] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 52.084] (II) intel(0): [DRI2] Setup complete
[ 52.084] (II) intel(0): [DRI2] DRI driver: i915
[ 52.084] (II) intel(0): [DRI2] VDPAU driver: i915
[ 52.084] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 52.084] (II) intel(0): hardware support for Present enabled
[ 52.085] (==) intel(0): display hotplug detection enabled
[ 52.085] (--) RandR disabled
[ 52.107] (II) SELinux: Disabled on system
[ 53.031] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 53.032] (II) AIGLX: enabled GLX_ARB_create_context
[ 53.032] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 53.032] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 53.032] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 53.032] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 53.032] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 53.032] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 53.032] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 53.033] (II) AIGLX: Loaded and initialized i915
[ 53.033] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 53.050] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 53.068] (II) intel(0): Setting screen physical size to 361 x 203
[ 57.268] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 57.270] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 57.270] (II) LoadModule: "evdev"
[ 57.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 58.970] (II) Module evdev: vendor="X.Org Foundation"
[ 58.970] compiled for 1.16.0, module version = 2.9.0
[ 58.970] Module class: X.Org XInput Driver
[ 58.970] ABI class: X.Org XInput driver, version 21.0
[ 58.970] (II) Using input driver 'evdev' for 'Power Button'
[ 58.970] (**) Power Button: always reports core events
[ 58.971] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 58.971] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 58.971] (--) evdev: Power Button: Found keys
[ 58.971] (II) evdev: Power Button: Configuring as keyboard
[ 58.971] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 58.971] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 58.971] (**) Option "xkb_rules" "evdev"
[ 58.972] (**) Option "xkb_model" "pc105"
[ 58.972] (**) Option "xkb_layout" "it"
[ 59.216] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 59.216] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 59.216] (II) Using input driver 'evdev' for 'Video Bus'
[ 59.216] (**) Video Bus: always reports core events
[ 59.216] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 59.217] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 59.217] (--) evdev: Video Bus: Found keys
[ 59.217] (II) evdev: Video Bus: Configuring as keyboard
[ 59.217] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[ 59.217] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 59.217] (**) Option "xkb_rules" "evdev"
[ 59.217] (**) Option "xkb_model" "pc105"
[ 59.217] (**) Option "xkb_layout" "it"
[ 59.219] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 59.219] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 59.219] (II) Using input driver 'evdev' for 'Power Button'
[ 59.219] (**) Power Button: always reports core events
[ 59.219] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 59.220] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 59.220] (--) evdev: Power Button: Found keys
[ 59.220] (II) evdev: Power Button: Configuring as keyboard
[ 59.220] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 59.220] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 59.220] (**) Option "xkb_rules" "evdev"
[ 59.220] (**) Option "xkb_model" "pc105"
[ 59.220] (**) Option "xkb_layout" "it"
[ 59.222] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 59.223] (II) No input driver specified, ignoring this device.
[ 59.223] (II) This device may have been added with another device file.
[ 59.224] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 59.224] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 59.224] (II) Using input driver 'evdev' for 'Sleep Button'
[ 59.224] (**) Sleep Button: always reports core events
[ 59.224] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 59.224] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 59.225] (--) evdev: Sleep Button: Found keys
[ 59.225] (II) evdev: Sleep Button: Configuring as keyboard
[ 59.225] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 59.225] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 59.225] (**) Option "xkb_rules" "evdev"
[ 59.225] (**) Option "xkb_model" "pc105"
[ 59.225] (**) Option "xkb_layout" "it"
[ 59.228] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event6)
[ 59.228] (II) No input driver specified, ignoring this device.
[ 59.228] (II) This device may have been added with another device file.
[ 59.229] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7)
[ 59.229] (II) No input driver specified, ignoring this device.
[ 59.229] (II) This device may have been added with another device file.
[ 59.231] (II) config/udev: Adding input device USB2.0 UVC VGA WebCam (/dev/input/event10)
[ 59.231] (**) USB2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[ 59.231] (II) Using input driver 'evdev' for 'USB2.0 UVC VGA WebCam'
[ 59.231] (**) USB2.0 UVC VGA WebCam: always reports core events
[ 59.231] (**) evdev: USB2.0 UVC VGA WebCam: Device: "/dev/input/event10"
[ 59.231] (--) evdev: USB2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5702
[ 59.231] (--) evdev: USB2.0 UVC VGA WebCam: Found keys
[ 59.231] (II) evdev: USB2.0 UVC VGA WebCam: Configuring as keyboard
[ 59.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11/event10"
[ 59.231] (II) XINPUT: Adding extended input device "USB2.0 UVC VGA WebCam" (type: KEYBOARD, id 10)
[ 59.232] (**) Option "xkb_rules" "evdev"
[ 59.232] (**) Option "xkb_model" "pc105"
[ 59.232] (**) Option "xkb_layout" "it"
[ 59.234] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[ 59.234] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 59.234] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 59.234] (**) Eee PC WMI hotkeys: always reports core events
[ 59.234] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event5"
[ 59.235] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 59.235] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 59.235] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 59.235] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event5"
[ 59.235] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 59.235] (**) Option "xkb_rules" "evdev"
[ 59.235] (**) Option "xkb_model" "pc105"
[ 59.235] (**) Option "xkb_layout" "it"
[ 59.237] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 59.238] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 59.238] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 59.238] (**) AT Translated Set 2 keyboard: always reports core events
[ 59.238] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 59.238] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 59.238] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 59.238] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 59.238] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 59.238] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 59.238] (**) Option "xkb_rules" "evdev"
[ 59.239] (**) Option "xkb_model" "pc105"
[ 59.239] (**) Option "xkb_layout" "it"
[ 59.241] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 59.241] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 59.241] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 59.241] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 59.241] (II) LoadModule: "synaptics"
[ 59.242] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 59.411] (II) Module synaptics: vendor="X.Org Foundation"
[ 59.411] compiled for 1.16.0.901, module version = 1.8.99
[ 59.411] Module class: X.Org XInput Driver
[ 59.411] ABI class: X.Org XInput driver, version 21.0
[ 59.411] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 59.412] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 59.412] (**) Option "Device" "/dev/input/event8"
[ 59.456] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 59.456] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 69)
[ 59.456] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728 (res 96)
[ 59.456] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 59.456] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 59.456] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 59.456] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 59.457] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 59.457] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 59.492] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event8"
[ 59.492] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 59.492] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 59.492] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 59.492] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 59.493] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 59.493] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 59.493] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 59.493] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 59.494] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 59.495] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 59.495] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 79.871] (II) intel(0): EDID vendor "HSD", prod id 1206
[ 79.872] (II) intel(0): Printing DDC gathered Modelines:
[ 79.872] (II) intel(0): Modeline "1366x768"x0.0 71.90 1366 1414 1480 1486 768 774 782 806 -hsync -vsync (48.4 kHz eP)
[ 96.044] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 154.994] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 154.994] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 155.039] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2276.914] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=31582
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=420230
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=298191
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=298569
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=28922
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=419483
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=23520
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=417820
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=26009
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=418757
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=996297
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=996422
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=996555
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=996680
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_7-usb-0_6_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_UVC_VGA_WebCam
E: ID_MODEL_ENC=USB2.0\x20UVC\x20VGA\x20WebCam
E: ID_MODEL_ID=5702
E: ID_PATH=pci-0000:00:1d.7-usb-0:6:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_6_1_0
E: ID_REVISION=0322
E: ID_SERIAL=Azurewave_USB2.0_UVC_VGA_WebCam_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Azurewave
E: ID_VENDOR_ENC=Azurewave
E: ID_VENDOR_ID=13d3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v13D3p5702e0322-e0,1,kD4,ramlsfw
E: NAME="USB2.0 UVC VGA WebCam"
E: PHYS="usb-0000:00:1d.7-6/button"
E: PRODUCT=3/13d3/5702/322
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=355786
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11/event10
N: input/event10
S: input/by-id/usb-Azurewave_USB2.0_UVC_VGA_WebCam_200901010001-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Azurewave_USB2.0_UVC_VGA_WebCam_200901010001-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11/event10
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB2.0_UVC_VGA_WebCam
E: ID_MODEL_ENC=USB2.0\x20UVC\x20VGA\x20WebCam
E: ID_MODEL_ID=5702
E: ID_PATH=pci-0000:00:1d.7-usb-0:6:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_6_1_0
E: ID_REVISION=0322
E: ID_SERIAL=Azurewave_USB2.0_UVC_VGA_WebCam_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Azurewave
E: ID_VENDOR_ENC=Azurewave
E: ID_VENDOR_ID=13d3
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=355967
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/platform/eeepc-wmi/input/input7
E: DEVPATH=/devices/platform/eeepc-wmi/input/input7
E: EV=100013
E: ID_FOR_SEAT=input-platform-eeepc-wmi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: KEY=7e00000 0 800000000000 0 0 1400b00100000 8300180001100800 e000000000000 2
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,14,k71,72,73,8B,94,98,AB,AC,B8,B9,BF,D4,E0,E1,E3,EE,F0,1AF,215,216,217,218,219,21A,ram4,lsfw
E: MSC=10
E: NAME="Eee PC WMI hotkeys"
E: PHYS="eeepc-wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=911563
P: /devices/platform/eeepc-wmi/input/input7/event5
N: input/event5
S: input/by-path/platform-eeepc-wmi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-eeepc-wmi-event
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/eeepc-wmi/input/input7/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: KEYBOARD_KEY_6b=f21
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=911709
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=93683
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=417150
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input6
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input6
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=760486
P: /devices/platform/i8042/serio1/input/input6/event8
N: input/event8
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event8
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=761007
P: /devices/platform/i8042/serio1/input/input6/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=760914
DRM Information from dmesg:
---------------------------
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 1.142823] Linux agpgart interface v0.103
[ 1.142973] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.143019] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.143170] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.143497] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 15.425980] [drm] Initialized drm 1.1.0 20060810
[ 15.839423] [drm] Memory usable by graphics device = 512M
[ 15.839433] [drm] Replacing VGA console driver
[ 15.864223] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.864228] [drm] Driver supports precise vblank timestamp query.
[ 15.958707] [drm] initialized overlay support
[ 15.978101] fbcon: inteldrmfb (fb0) is primary device
[ 16.148477] agpgart-intel 0000:00:00.0: no hotplug settings from platform
[ 16.148480] agpgart-intel 0000:00:00.0: using default PCI settings
[ 16.252597] agpgart-intel 0000:00:00.0: no hotplug settings from platform
[ 16.252600] agpgart-intel 0000:00:00.0: using default PCI settings
[ 17.244224] [drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on
[ 17.263189] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 17.297747] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.360525] agpgart-intel 0000:00:00.0: no hotplug settings from platform
[ 17.360531] agpgart-intel 0000:00:00.0: using default PCI settings
[ 17.464615] agpgart-intel 0000:00:00.0: no hotplug settings from platform
[ 17.464625] agpgart-intel 0000:00:00.0: using default PCI settings
[ 97.336137] [drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xorg depends on:
ii gnome-terminal [x-terminal-emulator] 3.14.1-1
ii libgl1-mesa-dri 10.3.2-1
ii libgl1-mesa-glx [libgl1] 10.3.2-1
ii libglu1-mesa 9.0.0-2
ii lxterminal [x-terminal-emulator] 0.2.0-1
ii x11-apps 7.7+4
ii x11-session-utils 7.7+1
ii x11-utils 7.7+2
ii x11-xkb-utils 7.7+1
ii x11-xserver-utils 7.7+3+b1
ii xauth 1:1.0.9-1
ii xfce4-terminal [x-terminal-emulator] 0.6.3-1+b1
ii xfonts-100dpi 1:1.0.3
ii xfonts-75dpi 1:1.0.3
ii xfonts-base 1:1.0.3
ii xfonts-scalable 1:1.0.3-1
ii xfonts-utils 1:7.7+2
ii xinit 1.3.4-1
ii xkb-data 2.12-1
ii xorg-docs-core 1:1.7-1
ii xserver-xorg 1:7.7+7
ii xterm [x-terminal-emulator] 312-1
xorg recommends no packages.
Versions of packages xorg suggests:
ii x11-xfs-utils 7.7+1
pn xorg-docs <none>
Versions of packages xserver-xorg depends on:
ii libc6 2.19-13
ii x11-xkb-utils 7.7+1
ii xkb-data 2.12-1
ii xserver-xorg-core 2:1.16.1.901-1
ii xserver-xorg-input-all 1:7.7+7
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.9.0-2
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.1-1
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.8.1-1
ii xserver-xorg-input-vmmouse [xorg-driver-input] 1:13.0.0-1+b3
ii xserver-xorg-input-wacom [xorg-driver-input] 0.26.0+20140918-1
ii xserver-xorg-video-all 1:7.7+7
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.5.0-1
ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.2-2+b1
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b2
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.99.914-1~exp1
ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.4-2
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.3-2+b1
ii xserver-xorg-video-modesetting [xorg-driver-video] 0.9.0-1+exp1
ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.8-1+b2
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.11-1
ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.3.3-1+b2
ii xserver-xorg-video-r128 [xorg-driver-video] 6.9.2-1+b2
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.5.0-1
ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.7-2+b2
ii xserver-xorg-video-siliconmotion [xorg-driver-video] 1:1.7.7-2+b2
ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.6-2+b2
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.5-1+b2
ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.6-2+b2
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.3-1+b3
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.0.2-3+b1
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 10.3.2-1
-- no debconf information
Reply to: