Bug#766049: xserver-xorg-core: Blank primary screen when seocndary attached
Package: xserver-xorg-core
Version: 2:1.16.1-1
Severity: grave
Dear Maintainer,
[ issues with reportbug #758619 prevented me from using it completely
to send this report so I generated using reportbug --template ]
Since upgrading from 2.:1.16.0.901-1 to the above version I have been
unable to use a second screen attached to my laptop. During this
update, I also went from linux-image-amd64 (3.14+59) to 3.16+61 – not
sure if its relevant.
I have Debian Jessie on a Thinkpad T440s.
I normally boot with the second monitor attached and it boots fine
into gdm. Since the update, booting with the monitor attached blanks
the laptop screen (primary screen) as X starts. The second screen
works fine as a second screen – as in the primary display is off but
it behaves as if it is there. The only way out here is to ctrl-alt-f1
to a terminal and reboot.
Booting with the second screen unplugged works fine for the primary
laptop screen. Attaching the second screen when logged into gnome
causes the primary laptop screen to blank again. From here if I
ctrl-alt-f1 and then ctrl-alt-f7 back into X I sometimes get them both
working as expected. Sometimes this too doesn't work and I have to
reboot again.
This worked fine until the update noted above. I have fiddled with
various display options to no avail.
The segmentation fault at the address shown in Xorg.0.log happens consistently.
Please let me know if there is any further info I can provide.
Thanks
Takis
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 May 3 16:00 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2397280 Sep 23 07:49 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation
Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 1455 May 3 16:08 01-synaptics.conf
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 59701 Oct 1 20:55 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 308.365]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 308.365] X Protocol Version 11, Revision 0
[ 308.365] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 308.365] Current Operating System: Linux fitter 3.16-2-amd64 #1
SMP Debian 3.16.3-2 (2014-09-20) x86_64
[ 308.365] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64
root=UUID=cfca3780-efcd-4272-a268-648b0d9ffdf1 ro quiet
[ 308.365] Build Date: 22 September 2014 09:45:37PM
[ 308.365] xorg-server 2:1.16.1-1 (http://www.debian.org/support)
[ 308.365] Current version of pixman: 0.32.6
[ 308.366] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 308.366] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 308.366] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 1
20:38:26 2014
[ 308.366] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 308.366] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 308.366] (==) No Layout section. Using the first Screen section.
[ 308.366] (==) No screen section available. Using defaults.
[ 308.366] (**) |-->Screen "Default Screen Section" (0)
[ 308.366] (**) | |-->Monitor "<default monitor>"
[ 308.366] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 308.366] (==) Automatically adding devices
[ 308.366] (==) Automatically enabling devices
[ 308.366] (==) Automatically adding GPU devices
[ 308.366] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 308.366] Entry deleted from font path.
[ 308.366] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 308.366] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 308.366] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 308.366] (II) Loader magic: 0x7fe9264d8d80
[ 308.366] (II) Module ABI versions:
[ 308.366] X.Org ANSI C Emulation: 0.4
[ 308.366] X.Org Video Driver: 18.0
[ 308.366] X.Org XInput driver : 21.0
[ 308.366] X.Org Server Extension : 8.0
[ 308.366] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 308.367] (--) PCI:*(0:0:2:0) 8086:0a16:17aa:220c rev 11, Mem @
0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[ 308.367] (II) LoadModule: "glx"
[ 308.367] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 308.368] (II) Module glx: vendor="X.Org Foundation"
[ 308.368] compiled for 1.16.1, module version = 1.0.0
[ 308.368] ABI class: X.Org Server Extension, version 8.0
[ 308.368] (==) AIGLX enabled
[ 308.368] (==) Matched intel as autoconfigured driver 0
[ 308.368] (==) Matched intel as autoconfigured driver 1
[ 308.368] (==) Matched modesetting as autoconfigured driver 2
[ 308.368] (==) Matched fbdev as autoconfigured driver 3
[ 308.368] (==) Matched vesa as autoconfigured driver 4
[ 308.368] (==) Assigned the driver to the xf86ConfigLayout
[ 308.368] (II) LoadModule: "intel"
[ 308.368] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 308.368] (II) Module intel: vendor="X.Org Foundation"
[ 308.368] compiled for 1.15.99.904, module version = 2.21.15
[ 308.368] Module class: X.Org Video Driver
[ 308.368] ABI class: X.Org Video Driver, version 18.0
[ 308.368] (II) LoadModule: "modesetting"
[ 308.368] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 308.368] (II) Module modesetting: vendor="X.Org Foundation"
[ 308.368] compiled for 1.15.99.904, module version = 0.9.0
[ 308.368] Module class: X.Org Video Driver
[ 308.368] ABI class: X.Org Video Driver, version 18.0
[ 308.368] (II) LoadModule: "fbdev"
[ 308.368] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 308.368] (II) Module fbdev: vendor="X.Org Foundation"
[ 308.368] compiled for 1.15.99.904, module version = 0.4.4
[ 308.368] Module class: X.Org Video Driver
[ 308.368] ABI class: X.Org Video Driver, version 18.0
[ 308.368] (II) LoadModule: "vesa"
[ 308.368] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 308.368] (II) Module vesa: vendor="X.Org Foundation"
[ 308.368] compiled for 1.15.99.904, module version = 2.3.3
[ 308.368] Module class: X.Org Video Driver
[ 308.368] ABI class: X.Org Video Driver, version 18.0
[ 308.368] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 308.369] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 308.369] (II) FBDEV: driver for framebuffer: fbdev
[ 308.369] (II) VESA: driver for VESA chipsets: vesa
[ 308.369] (++) using VT number 1
[ 308.369] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 308.369] (WW) Falling back to old probe method for modesetting
[ 308.369] (WW) Falling back to old probe method for fbdev
[ 308.369] (II) Loading sub module "fbdevhw"
[ 308.369] (II) LoadModule: "fbdevhw"
[ 308.369] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 308.369] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 308.369] compiled for 1.16.1, module version = 0.0.2
[ 308.369] ABI class: X.Org Video Driver, version 18.0
[ 308.369] (WW) Falling back to old probe method for vesa
[ 308.369] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 308.369] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 308.369] (==) intel(0): RGB weight 888
[ 308.369] (==) intel(0): Default visual is TrueColor
[ 308.369] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics 4400
[ 308.369] (**) intel(0): Relaxed fencing enabled
[ 308.369] (**) intel(0): Wait on SwapBuffers? enabled
[ 308.369] (**) intel(0): Triple buffering? enabled
[ 308.369] (**) intel(0): Framebuffer tiled
[ 308.369] (**) intel(0): Pixmaps tiled
[ 308.369] (**) intel(0): 3D buffers tiled
[ 308.369] (**) intel(0): SwapBuffers wait enabled
[ 308.369] (==) intel(0): video overlay key set to 0x101fe
[ 308.369] (II) intel(0): Output eDP1 has no monitor section
[ 308.369] (--) intel(0): found backlight control interface
/sys/class/backlight/intel_backlight
[ 308.369] (II) intel(0): Output DP1 has no monitor section
[ 308.400] (II) intel(0): Output HDMI1 has no monitor section
[ 308.400] (II) intel(0): Output DP2 has no monitor section
[ 308.400] (II) intel(0): Output HDMI2 has no monitor section
[ 308.400] (II) intel(0): EDID for output eDP1
[ 308.400] (II) intel(0): Manufacturer: LGD Model: 40a Serial#: 0
[ 308.400] (II) intel(0): Year: 2013 Week: 0
[ 308.400] (II) intel(0): EDID Version: 1.4
[ 308.400] (II) intel(0): Digital Display Input
[ 308.400] (II) intel(0): 6 bits per channel
[ 308.400] (II) intel(0): Digital interface is DisplayPort
[ 308.400] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 308.401] (II) intel(0): Gamma: 2.20
[ 308.401] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 308.401] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 308.401] (II) intel(0): First detailed timing is preferred mode
[ 308.401] (II) intel(0): Preferred mode is native pixel format and
refresh rate
[ 308.401] (II) intel(0): redX: 0.640 redY: 0.345 greenX: 0.335
greenY: 0.625
[ 308.401] (II) intel(0): blueX: 0.150 blueY: 0.052 whiteX: 0.313
whiteY: 0.329
[ 308.401] (II) intel(0): Manufacturer's mask: 0
[ 308.401] (II) intel(0): Supported detailed timing:
[ 308.401] (II) intel(0): clock: 140.1 MHz Image Size: 309 x 175 mm
[ 308.401] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end
2016 h_blank_end 2092 h_border: 0
[ 308.401] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end
1088 v_blanking: 1116 v_border: 0
[ 308.401] (II) intel(0): LG Display
[ 308.401] (II) intel(0): LP140WF1-SPK1
[ 308.401] (II) intel(0): EDID (in hex):
[ 308.401] (II) intel(0): 00ffffffffffff0030e40a0400000000
[ 308.401] (II) intel(0): 00170104951f1178eadc95a35855a026
[ 308.401] (II) intel(0): 0d505400000001010101010101010101
[ 308.401] (II) intel(0): 010101010101ba3680ac703824403c24
[ 308.401] (II) intel(0): 350035af1000001a0000000000000000
[ 308.401] (II) intel(0): 00000000000000000000000000fe004c
[ 308.401] (II) intel(0): 4720446973706c61790a2020000000fe
[ 308.401] (II) intel(0): 004c503134305746312d53504b310074
[ 308.401] (II) intel(0): Not using default mode "320x240"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "512x384"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "640x480"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "640x512"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "800x600"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "896x672"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "928x696"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "960x720"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "576x432"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "680x384"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "680x384"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "700x525"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "720x450"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "800x512"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "840x525"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "840x525"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "960x540"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "960x600"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Not using default mode "1024x768"
(doublescan mode not supported)
[ 308.401] (II) intel(0): Printing probed modes for output eDP1
[ 308.401] (II) intel(0): Modeline "1920x1080"x60.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 308.401] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920
1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 308.401] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680
1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 308.401] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680
1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 308.401] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600
1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 308.401] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400
1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 308.401] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 308.401] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440
1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 308.401] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280
1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 308.401] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360
1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 308.401] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360
1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 308.401] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152
1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 308.401] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 308.401] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 308.401] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 308.401] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 308.401] (II) intel(0): EDID for output DP1
[ 308.432] (II) intel(0): EDID for output HDMI1
[ 308.432] (II) intel(0): EDID for output DP2
[ 308.432] (II) intel(0): EDID for output HDMI2
[ 308.432] (II) intel(0): Output eDP1 connected
[ 308.432] (II) intel(0): Output DP1 disconnected
[ 308.432] (II) intel(0): Output HDMI1 disconnected
[ 308.432] (II) intel(0): Output DP2 disconnected
[ 308.432] (II) intel(0): Output HDMI2 disconnected
[ 308.432] (II) intel(0): Using exact sizes for initial modes
[ 308.432] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 308.432] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 308.432] (II) intel(0): Kernel page flipping support detected, enabling
[ 308.432] (==) intel(0): DPI set to (96, 96)
[ 308.432] (II) Loading sub module "fb"
[ 308.432] (II) LoadModule: "fb"
[ 308.432] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 308.432] (II) Module fb: vendor="X.Org Foundation"
[ 308.432] compiled for 1.16.1, module version = 1.0.0
[ 308.432] ABI class: X.Org ANSI C Emulation, version 0.4
[ 308.432] (II) Loading sub module "dri2"
[ 308.432] (II) LoadModule: "dri2"
[ 308.432] (II) Module "dri2" already built-in
[ 308.432] (II) UnloadModule: "modesetting"
[ 308.432] (II) Unloading modesetting
[ 308.432] (II) UnloadModule: "fbdev"
[ 308.432] (II) Unloading fbdev
[ 308.432] (II) UnloadSubModule: "fbdevhw"
[ 308.432] (II) Unloading fbdevhw
[ 308.432] (II) UnloadModule: "vesa"
[ 308.432] (II) Unloading vesa
[ 308.432] (==) Depth 24 pixmap format is 32 bpp
[ 308.432] (II) intel(0): [DRI2] Setup complete
[ 308.432] (II) intel(0): [DRI2] DRI driver: i965
[ 308.432] (II) intel(0): Allocated new frame buffer 1920x1080
stride 7680, tiled
[ 308.433] (II) UXA(0): Driver registered support for the following
operations:
[ 308.433] (II) solid
[ 308.433] (II) copy
[ 308.433] (II) composite (RENDER acceleration)
[ 308.433] (II) put_image
[ 308.433] (II) get_image
[ 308.433] (==) intel(0): Backing store enabled
[ 308.433] (==) intel(0): Silken mouse enabled
[ 308.433] (II) intel(0): Initializing HW Cursor
[ 308.433] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 308.433] (==) intel(0): DPMS enabled
[ 308.433] (==) intel(0): Intel XvMC decoder enabled
[ 308.433] (II) intel(0): Set up textured video
[ 308.433] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 308.433] (II) intel(0): direct rendering: DRI2 Enabled
[ 308.433] (==) intel(0): hotplug detection: "enabled"
[ 308.452] (--) RandR disabled
[ 308.455] (II) SELinux: Disabled on system
[ 308.464] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 308.464] (II) AIGLX: enabled GLX_ARB_create_context
[ 308.464] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 308.464] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 308.464] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 308.464] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 308.464] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 308.464] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 308.464] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 308.464] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 308.464] (II) AIGLX: Loaded and initialized i965
[ 308.464] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 308.464] (II) intel(0): Setting screen physical size to 508 x 285
[ 308.482] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 308.482] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 308.482] (II) LoadModule: "evdev"
[ 308.482] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 308.482] (II) Module evdev: vendor="X.Org Foundation"
[ 308.482] compiled for 1.16.0, module version = 2.9.0
[ 308.482] Module class: X.Org XInput Driver
[ 308.482] ABI class: X.Org XInput driver, version 21.0
[ 308.482] (II) Using input driver 'evdev' for 'Power Button'
[ 308.482] (**) Power Button: always reports core events
[ 308.482] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 308.482] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 308.482] (--) evdev: Power Button: Found keys
[ 308.482] (II) evdev: Power Button: Configuring as keyboard
[ 308.482] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 308.482] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 308.482] (**) Option "xkb_rules" "evdev"
[ 308.482] (**) Option "xkb_model" "pc105"
[ 308.482] (**) Option "xkb_layout" "us"
[ 308.482] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 308.482] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 308.482] (II) Using input driver 'evdev' for 'Video Bus'
[ 308.482] (**) Video Bus: always reports core events
[ 308.482] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 308.482] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 308.482] (--) evdev: Video Bus: Found keys
[ 308.482] (II) evdev: Video Bus: Configuring as keyboard
[ 308.482] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[ 308.482] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 308.482] (**) Option "xkb_rules" "evdev"
[ 308.482] (**) Option "xkb_model" "pc105"
[ 308.482] (**) Option "xkb_layout" "us"
[ 308.482] (II) config/udev: Adding input device Lid Switch
(/dev/input/event1)
[ 308.482] (II) No input driver specified, ignoring this device.
[ 308.482] (II) This device may have been added with another device file.
[ 308.482] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 308.483] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 308.483] (II) Using input driver 'evdev' for 'Sleep Button'
[ 308.483] (**) Sleep Button: always reports core events
[ 308.483] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 308.483] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 308.483] (--) evdev: Sleep Button: Found keys
[ 308.483] (II) evdev: Sleep Button: Configuring as keyboard
[ 308.483] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 308.483] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 8)
[ 308.483] (**) Option "xkb_rules" "evdev"
[ 308.483] (**) Option "xkb_model" "pc105"
[ 308.483] (**) Option "xkb_layout" "us"
[ 308.483] (II) config/udev: Adding input device Leadtek WinFast DTV
Dongle Gold (/dev/input/event16)
[ 308.483] (**) Leadtek WinFast DTV Dongle Gold: Applying InputClass
"evdev keyboard catchall"
[ 308.483] (II) Using input driver 'evdev' for 'Leadtek WinFast DTV
Dongle Gold'
[ 308.483] (**) Leadtek WinFast DTV Dongle Gold: always reports core events
[ 308.483] (**) evdev: Leadtek WinFast DTV Dongle Gold: Device:
"/dev/input/event16"
[ 308.483] (--) evdev: Leadtek WinFast DTV Dongle Gold: Vendor 0x413
Product 0x6029
[ 308.483] (--) evdev: Leadtek WinFast DTV Dongle Gold: Found keys
[ 308.483] (II) evdev: Leadtek WinFast DTV Dongle Gold: Configuring
as keyboard
[ 308.483] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:0413:6029.0001/input/input17/event16"
[ 308.483] (II) XINPUT: Adding extended input device "Leadtek
WinFast DTV Dongle Gold" (type: KEYBOARD, id 9)
[ 308.483] (**) Option "xkb_rules" "evdev"
[ 308.483] (**) Option "xkb_model" "pc105"
[ 308.483] (**) Option "xkb_layout" "us"
[ 308.483] (II) config/udev: Adding input device Leadtek WinFast DTV
Dongle Gold (/dev/input/event15)
[ 308.483] (**) Leadtek WinFast DTV Dongle Gold: Applying InputClass
"evdev keyboard catchall"
[ 308.483] (II) Using input driver 'evdev' for 'Leadtek WinFast DTV
Dongle Gold'
[ 308.483] (**) Leadtek WinFast DTV Dongle Gold: always reports core events
[ 308.483] (**) evdev: Leadtek WinFast DTV Dongle Gold: Device:
"/dev/input/event15"
[ 308.483] (--) evdev: Leadtek WinFast DTV Dongle Gold: Vendor 0x413
Product 0x6029
[ 308.483] (--) evdev: Leadtek WinFast DTV Dongle Gold: Found keys
[ 308.483] (II) evdev: Leadtek WinFast DTV Dongle Gold: Configuring
as keyboard
[ 308.483] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input16/event15"
[ 308.483] (II) XINPUT: Adding extended input device "Leadtek
WinFast DTV Dongle Gold" (type: KEYBOARD, id 10)
[ 308.483] (**) Option "xkb_rules" "evdev"
[ 308.483] (**) Option "xkb_model" "pc105"
[ 308.483] (**) Option "xkb_layout" "us"
[ 308.484] (II) config/udev: Adding input device Microsoft Microsoft
3-Button Mouse with IntelliEye(TM) (/dev/input/event17)
[ 308.484] (**) Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 308.484] (II) Using input driver 'evdev' for 'Microsoft Microsoft
3-Button Mouse with IntelliEye(TM)'
[ 308.484] (**) Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): always reports core events
[ 308.484] (**) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Device: "/dev/input/event17"
[ 308.484] (--) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Vendor 0x45e Product 0x40
[ 308.484] (--) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Found 3 mouse buttons
[ 308.484] (--) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Found scroll wheel(s)
[ 308.484] (--) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Found relative axes
[ 308.484] (--) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Found x and y relative axes
[ 308.484] (II) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Configuring as mouse
[ 308.484] (II) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Adding scrollwheel support
[ 308.484] (**) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 308.484] (**) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
[ 308.484] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0040.0002/input/input18/event17"
[ 308.484] (II) XINPUT: Adding extended input device "Microsoft
Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 11)
[ 308.484] (II) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): initialized for relative axes.
[ 308.484] (**) Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 308.484] (**) Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): (accel) acceleration profile 0
[ 308.484] (**) Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): (accel) acceleration factor: 2.000
[ 308.484] (**) Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): (accel) acceleration threshold: 4
[ 308.484] (II) config/udev: Adding input device Microsoft Microsoft
3-Button Mouse with IntelliEye(TM) (/dev/input/mouse2)
[ 308.484] (II) No input driver specified, ignoring this device.
[ 308.484] (II) This device may have been added with another device file.
[ 308.484] (II) config/udev: Adding input device Integrated Camera
(/dev/input/event14)
[ 308.484] (**) Integrated Camera: Applying InputClass "evdev
keyboard catchall"
[ 308.484] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 308.484] (**) Integrated Camera: always reports core events
[ 308.484] (**) evdev: Integrated Camera: Device: "/dev/input/event14"
[ 308.484] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x26a
[ 308.484] (--) evdev: Integrated Camera: Found keys
[ 308.484] (II) evdev: Integrated Camera: Configuring as keyboard
[ 308.484] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input15/event14"
[ 308.484] (II) XINPUT: Adding extended input device "Integrated
Camera" (type: KEYBOARD, id 12)
[ 308.484] (**) Option "xkb_rules" "evdev"
[ 308.484] (**) Option "xkb_model" "pc105"
[ 308.484] (**) Option "xkb_layout" "us"
[ 308.484] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event8)
[ 308.484] (II) No input driver specified, ignoring this device.
[ 308.484] (II) This device may have been added with another device file.
[ 308.484] (II) config/udev: Adding input device HDA Intel PCH Dock
Mic (/dev/input/event9)
[ 308.484] (II) No input driver specified, ignoring this device.
[ 308.484] (II) This device may have been added with another device file.
[ 308.485] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event10)
[ 308.485] (II) No input driver specified, ignoring this device.
[ 308.485] (II) This device may have been added with another device file.
[ 308.485] (II) config/udev: Adding input device HDA Intel PCH Dock
Headphone (/dev/input/event11)
[ 308.485] (II) No input driver specified, ignoring this device.
[ 308.485] (II) This device may have been added with another device file.
[ 308.485] (II) config/udev: Adding input device HDA Intel PCH
Headphone (/dev/input/event12)
[ 308.485] (II) No input driver specified, ignoring this device.
[ 308.485] (II) This device may have been added with another device file.
[ 308.485] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 308.485] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 308.485] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 308.485] (**) AT Translated Set 2 keyboard: always reports core events
[ 308.485] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 308.485] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 308.485] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 308.485] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 308.485] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 308.485] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 13)
[ 308.485] (**) Option "xkb_rules" "evdev"
[ 308.485] (**) Option "xkb_model" "pc105"
[ 308.485] (**) Option "xkb_layout" "us"
[ 308.485] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/event6)
[ 308.485] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"evdev touchpad catchall"
[ 308.485] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"touchpad catchall"
[ 308.485] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"Default clickpad buttons"
[ 308.485] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"touchpad catchall"
[ 308.485] (II) LoadModule: "synaptics"
[ 308.485] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 308.485] (II) Module synaptics: vendor="X.Org Foundation"
[ 308.485] compiled for 1.16.0.901, module version = 1.8.99
[ 308.485] Module class: X.Org XInput Driver
[ 308.485] ABI class: X.Org XInput driver, version 21.0
[ 308.485] (II) Using input driver 'synaptics' for 'SynPS/2
Synaptics TouchPad'
[ 308.485] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 308.485] (**) Option "Device" "/dev/input/event6"
[ 308.512] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 308.512] (II) synaptics: SynPS/2 Synaptics TouchPad: found top
buttonpad property
[ 308.512] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range
1024 - 5112 (res 42)
[ 308.512] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range
2024 - 4832 (res 42)
[ 308.512] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 308.512] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width
range 0 - 15
[ 308.512] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left
double triple
[ 308.512] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 308.512] (**) Option "AreaTopEdge" "2400"
[ 308.512] (**) Option "HorizHysteresis" "30"
[ 308.512] (**) Option "VertHysteresis" "30"
[ 308.512] (**) Option "FingerLow" "40"
[ 308.512] (**) Option "FingerHigh" "45"
[ 308.512] (**) Option "VertEdgeScroll" "0"
[ 308.512] (**) Option "TapButton3" "2"
[ 308.512] (**) Option "MinSpeed" "1"
[ 308.512] (**) Option "MaxSpeed" "1"
[ 308.512] (**) Option "TapAndDragGesture" "0"
[ 308.512] (**) Option "SoftButtonAreas" "60% 0 0 2400 40% 60% 0 2400"
[ 308.512] (**) Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
[ 308.512] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 308.512] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 308.564] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 308.564] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 308.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MinSpeed is now constant deceleration 1.0
[ 308.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MaxSpeed is now 1.00
[ 308.564] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
AccelFactor is now 0.040
[ 308.564] (**) SynPS/2 Synaptics TouchPad: (accel) keeping
acceleration scheme 1
[ 308.564] (**) Option "ConstantDeceleration" "4"
[ 308.564] (**) SynPS/2 Synaptics TouchPad: (accel) constant
deceleration by 4.0
[ 308.564] (**) Option "AccelerationProfile" "2"
[ 308.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 2
[ 308.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 308.564] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 308.564] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 308.564] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/mouse0)
[ 308.564] (**) SynPS/2 Synaptics TouchPad: Ignoring device from
InputClass "touchpad ignore duplicates"
[ 308.564] (II) config/udev: Adding input device TPPS/2 IBM
TrackPoint (/dev/input/event13)
[ 308.564] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev
pointer catchall"
[ 308.564] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 308.564] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 308.564] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event13"
[ 308.564] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 308.564] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 308.564] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 308.564] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 308.564] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 308.564] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 308.564] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 308.564] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/serio2/input/input8/event13"
[ 308.564] (II) XINPUT: Adding extended input device "TPPS/2 IBM
TrackPoint" (type: MOUSE, id 15)
[ 308.564] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 308.565] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 308.565] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 308.565] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 308.565] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 308.565] (II) config/udev: Adding input device TPPS/2 IBM
TrackPoint (/dev/input/mouse1)
[ 308.565] (II) No input driver specified, ignoring this device.
[ 308.565] (II) This device may have been added with another device file.
[ 308.565] (II) config/udev: Adding input device PC Speaker
(/dev/input/event4)
[ 308.565] (II) No input driver specified, ignoring this device.
[ 308.565] (II) This device may have been added with another device file.
[ 308.565] (II) config/udev: Adding input device ThinkPad Extra
Buttons (/dev/input/event5)
[ 308.565] (**) ThinkPad Extra Buttons: Applying InputClass "evdev
keyboard catchall"
[ 308.565] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 308.565] (**) ThinkPad Extra Buttons: always reports core events
[ 308.565] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 308.565] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 308.565] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 308.565] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 308.565] (**) Option "config_info"
"udev:/sys/devices/platform/thinkpad_acpi/input/input7/event5"
[ 308.565] (II) XINPUT: Adding extended input device "ThinkPad Extra
Buttons" (type: KEYBOARD, id 16)
[ 308.565] (**) Option "xkb_rules" "evdev"
[ 308.565] (**) Option "xkb_model" "pc105"
[ 308.565] (**) Option "xkb_layout" "us"
[ 312.403] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 312.403] (II) intel(0): Printing DDC gathered Modelines:
[ 312.403] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 315.936] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 315.936] (II) intel(0): Printing DDC gathered Modelines:
[ 315.936] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 318.012] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 318.012] (II) intel(0): Printing DDC gathered Modelines:
[ 318.012] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 318.044] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 318.044] (II) intel(0): Printing DDC gathered Modelines:
[ 318.044] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 343.636] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 540.589] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 540.605] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 540.605] (II) intel(0): Printing DDC gathered Modelines:
[ 540.605] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 540.636] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 549.020] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 602.089] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 602.097] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 602.097] (II) intel(0): Printing DDC gathered Modelines:
[ 602.097] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 602.129] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 609.588] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 727.512] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 727.529] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 727.529] (II) intel(0): Printing DDC gathered Modelines:
[ 727.529] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 727.560] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 733.457] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 775.209] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 775.241] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.241] (II) intel(0): Printing DDC gathered Modelines:
[ 775.241] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 775.348] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 775.349] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.349] (II) intel(0): Printing DDC gathered Modelines:
[ 775.349] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 775.453] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.453] (II) intel(0): Printing DDC gathered Modelines:
[ 775.453] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 775.557] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.557] (II) intel(0): Printing DDC gathered Modelines:
[ 775.557] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 775.661] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.661] (II) intel(0): Printing DDC gathered Modelines:
[ 775.661] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 775.765] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.765] (II) intel(0): Printing DDC gathered Modelines:
[ 775.765] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 775.869] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.869] (II) intel(0): Printing DDC gathered Modelines:
[ 775.869] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 775.973] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 775.973] (II) intel(0): Printing DDC gathered Modelines:
[ 775.973] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 776.081] (II) intel(0): Allocated new frame buffer 3200x1080
stride 12800, tiled
[ 777.220] (II) intel(0): EDID vendor "LGD", prod id 1034
[ 777.220] (II) intel(0): Printing DDC gathered Modelines:
[ 777.220] (II) intel(0): Modeline "1920x1080"x0.0 140.10 1920
1980 2016 2092 1080 1083 1088 1116 +hsync -vsync (67.0 kHz eP)
[ 777.428] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 777.428] (II) intel(0): Using hsync ranges from config file
[ 777.428] (II) intel(0): Using vrefresh ranges from config file
[ 777.428] (II) intel(0): Printing DDC gathered Modelines:
[ 777.428] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 777.428] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 777.428] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 777.428] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 777.428] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 777.428] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 777.428] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 777.428] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 777.428] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 777.428] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 777.428] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 777.428] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 777.428] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 777.428] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 777.428] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 777.428] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 777.532] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 777.532] (II) intel(0): Using hsync ranges from config file
[ 777.532] (II) intel(0): Using vrefresh ranges from config file
[ 777.532] (II) intel(0): Printing DDC gathered Modelines:
[ 777.532] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 777.532] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 777.532] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 777.532] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 777.532] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 777.532] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 777.532] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 777.532] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 777.532] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 777.532] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 777.532] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 777.532] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 777.532] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 777.532] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 777.532] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 777.532] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 777.636] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 777.636] (II) intel(0): Using hsync ranges from config file
[ 777.636] (II) intel(0): Using vrefresh ranges from config file
[ 777.636] (II) intel(0): Printing DDC gathered Modelines:
[ 777.636] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 777.636] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 777.636] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 777.636] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 777.636] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 777.636] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 777.636] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 777.636] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 777.636] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 777.636] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 777.636] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 777.636] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 777.636] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 777.636] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 777.636] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 777.636] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 777.740] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 777.740] (II) intel(0): Using hsync ranges from config file
[ 777.740] (II) intel(0): Using vrefresh ranges from config file
[ 777.740] (II) intel(0): Printing DDC gathered Modelines:
[ 777.740] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 777.740] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 777.740] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 777.740] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 777.740] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 777.740] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 777.740] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 777.740] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 777.740] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 777.740] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 777.740] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 777.740] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 777.740] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 777.740] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 777.740] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 777.740] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 777.844] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 777.844] (II) intel(0): Using hsync ranges from config file
[ 777.844] (II) intel(0): Using vrefresh ranges from config file
[ 777.844] (II) intel(0): Printing DDC gathered Modelines:
[ 777.844] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 777.844] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 777.844] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 777.844] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 777.844] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 777.844] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 777.844] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 777.844] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 777.844] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 777.844] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 777.844] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 777.844] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 777.844] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 777.844] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 777.844] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 777.844] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 778.156] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 778.156] (II) intel(0): Using hsync ranges from config file
[ 778.156] (II) intel(0): Using vrefresh ranges from config file
[ 778.156] (II) intel(0): Printing DDC gathered Modelines:
[ 778.156] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 778.156] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 778.156] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 778.156] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 778.156] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 778.156] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 778.156] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 778.156] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 778.156] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 778.156] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 778.156] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 778.156] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 778.156] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 778.156] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 778.156] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 778.156] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 783.561] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 818.958] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 819.092] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 819.092] (II) intel(0): Using hsync ranges from config file
[ 819.092] (II) intel(0): Using vrefresh ranges from config file
[ 819.092] (II) intel(0): Printing DDC gathered Modelines:
[ 819.092] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 819.092] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 819.092] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 819.092] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 819.092] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 819.092] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 819.092] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 819.092] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 819.092] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 819.092] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 819.092] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 819.092] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 819.092] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 819.092] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 819.092] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 819.092] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 819.093] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 824.099] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1096.206] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1097.436] (II) intel(0): EDID vendor "PHL", prod id 2091
[ 1097.436] (II) intel(0): Using hsync ranges from config file
[ 1097.436] (II) intel(0): Using vrefresh ranges from config file
[ 1097.436] (II) intel(0): Printing DDC gathered Modelines:
[ 1097.436] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1097.436] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1097.436] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1097.436] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1097.436] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 1097.436] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1097.436] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1097.436] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1097.436] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1097.436] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1097.436] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1097.436] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1097.436] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1097.436] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1097.436] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1097.436] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1097.438] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1104.844] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1340.223] (II) evdev: ThinkPad Extra Buttons: Close
[ 1340.223] (II) UnloadModule: "evdev"
[ 1340.223] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 1340.223] (II) UnloadModule: "evdev"
[ 1340.223] (II) UnloadModule: "synaptics"
[ 1340.223] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1340.223] (II) UnloadModule: "evdev"
[ 1340.223] (II) evdev: Integrated Camera: Close
[ 1340.223] (II) UnloadModule: "evdev"
[ 1340.223] (II) evdev: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM): Close
[ 1340.223] (II) UnloadModule: "evdev"
[ 1340.223] (II) evdev: Leadtek WinFast DTV Dongle Gold: Close
[ 1340.242] (II) UnloadModule: "evdev"
[ 1340.242] (II) evdev: Leadtek WinFast DTV Dongle Gold: Close
[ 1340.243] (II) UnloadModule: "evdev"
[ 1340.243] (II) evdev: Sleep Button: Close
[ 1340.243] (II) UnloadModule: "evdev"
[ 1340.243] (II) evdev: Video Bus: Close
[ 1340.243] (II) UnloadModule: "evdev"
[ 1340.243] (II) evdev: Power Button: Close
[ 1340.243] (II) UnloadModule: "evdev"
[ 1340.260] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 1340.260] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 1340.260] (EE)
Fatal server error:
[ 1340.260] (EE) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 1340.260] (EE)
[ 1340.260] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1340.260] (EE) Please also check the log file at
"/var/log/Xorg.0.log" for additional information.
[ 1340.260] (EE)
[ 1340.260] (EE)
[ 1340.260] (EE) Backtrace:
[ 1340.260] (EE) 0: /usr/bin/X (xorg_backtrace+0x56) [0x7fe926251ab6]
[ 1340.260] (EE) 1: /usr/bin/X (0x7fe92609c000+0x1b9c99) [0x7fe926255c99]
[ 1340.260] (EE) 2: /lib/x86_64-linux-gnu/libc.so.6
(0x7fe923d8f000+0x350f0) [0x7fe923dc40f0]
[ 1340.260] (EE) 3: ?? [0x7fe926f77d00]
[ 1340.260] (EE)
[ 1340.260] (EE) Segmentation fault at address 0x7fe926f77d00
[ 1340.260] (EE)
FatalError re-entered, aborting
[ 1340.260] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 1340.260] (EE)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=92940
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=45323
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=53325
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=53419
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=87278
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=42106
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=91923
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=43754
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:0413:6029.0001/input/input16
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:0413:6029.0001/input/input16
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_2_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=WinFast_DTV_Dongle_Gold
E: ID_MODEL_ENC=WinFast\x20DTV\x20Dongle\x20Gold
E: ID_MODEL_ID=6029
E: ID_PATH=pci-0000:00:14.0-usb-0:3.2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_2_1_1
E: ID_REVISION=0200
E: ID_SERIAL=Leadtek_WinFast_DTV_Dongle_Gold
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:ff0000:030001:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Leadtek
E: ID_VENDOR_ENC=Leadtek
E: ID_VENDOR_ID=0413
E: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0003v0413p6029e0101-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="Leadtek WinFast DTV Dongle Gold"
E: PHYS="usb-0000:00:14.0-3.2/input1"
E: PRODUCT=3/413/6029/101
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=132983
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:0413:6029.0001/input/input16/event15
N: input/event15
S: input/by-id/usb-Leadtek_WinFast_DTV_Dongle_Gold-if01-event-kbd
S: input/by-path/pci-0000:00:14.0-usb-0:3.2:1.1-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Leadtek_WinFast_DTV_Dongle_Gold-if01-event-kbd
/dev/input/by-path/pci-0000:00:14.0-usb-0:3.2:1.1-event-kbd
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:0413:6029.0001/input/input16/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=WinFast_DTV_Dongle_Gold
E: ID_MODEL_ENC=WinFast\x20DTV\x20Dongle\x20Gold
E: ID_MODEL_ID=6029
E: ID_PATH=pci-0000:00:14.0-usb-0:3.2:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_2_1_1
E: ID_REVISION=0200
E: ID_SERIAL=Leadtek_WinFast_DTV_Dongle_Gold
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:ff0000:030001:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Leadtek
E: ID_VENDOR_ENC=Leadtek
E: ID_VENDOR_ID=0413
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=133030
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input15
E: EV=100013
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:14.0-usb-0:3.2
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_2
E: KEY=108fc310 280289100000000 0 118000 20018000004803 e168000000000
10000000000ffe
E: MODALIAS=input:b0003v0413p6029e0200-e0,1,4,14,k71,72,73,80,81,8B,8E,A7,A8,B5,CF,D0,D4,160,164,167,16B,16D,177,179,184,188,189,18E,18F,190,191,192,193,197,19C,ram4,lsfw
E: MSC=10
E: NAME="Leadtek WinFast DTV Dongle Gold"
E: PHYS="usb-0000:00:14.0-3.2/ir0"
E: PRODUCT=3/413/6029/200
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=548422
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input15/event14
N: input/event14
S: input/by-path/pci-0000:00:14.0-usb-0:3.2-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:3.2-event
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/rc/rc0/input15/event14
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:14.0-usb-0:3.2
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_2
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=548436
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0040.0002/input/input17
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0040.0002/input/input17
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_3-Button_Mouse_with_IntelliEye_TM_
E: ID_MODEL_ENC=Microsoft\x203-Button\x20Mouse\x20with\x20IntelliEye\x28TM\x29
E: ID_MODEL_ID=0040
E: ID_PATH=pci-0000:00:14.0-usb-0:3.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_REVISION=0300
E: ID_SERIAL=Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0003v045Ep0040e0110-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)"
E: PHYS="usb-0000:00:14.0-3.3/input0"
E: PRODUCT=3/45e/40/110
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=133205
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0040.0002/input/input17/event16
N: input/event16
S: input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-event-mouse
/dev/input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-event-mouse
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0040.0002/input/input17/event16
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_3-Button_Mouse_with_IntelliEye_TM_
E: ID_MODEL_ENC=Microsoft\x203-Button\x20Mouse\x20with\x20IntelliEye\x28TM\x29
E: ID_MODEL_ID=0040
E: ID_PATH=pci-0000:00:14.0-usb-0:3.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_REVISION=0300
E: ID_SERIAL=Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=133266
P: /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0040.0002/input/input17/mouse2
N: input/mouse2
S: input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-mouse
/dev/input/by-path/pci-0000:00:14.0-usb-0:3.3:1.0-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:0040.0002/input/input17/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Microsoft_3-Button_Mouse_with_IntelliEye_TM_
E: ID_MODEL_ENC=Microsoft\x203-Button\x20Mouse\x20with\x20IntelliEye\x28TM\x29
E: ID_MODEL_ID=0040
E: ID_PATH=pci-0000:00:14.0-usb-0:3.3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_3_1_0
E: ID_REVISION=0300
E: ID_SERIAL=Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=133230
P: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_8_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=026a
E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0
E: ID_REVISION=0003
E: ID_SERIAL=SunplusIT_INC._Integrated_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_INC.
E: ID_VENDOR_ENC=SunplusIT\x20INC.
E: ID_VENDOR_ID=5986
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v5986p026Ae0003-e0,1,kD4,ramlsfw
E: NAME="Integrated Camera"
E: PHYS="usb-0000:00:14.0-8/button"
E: PRODUCT=3/5986/26a/3
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=479462
P: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18/event17
N: input/event17
S: input/by-id/usb-SunplusIT_INC._Integrated_Camera-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-SunplusIT_INC._Integrated_Camera-event-if00
/dev/input/by-path/pci-0000:00:14.0-usb-0:8:1.0-event
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input18/event17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=026a
E: ID_PATH=pci-0000:00:14.0-usb-0:8:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_8_1_0
E: ID_REVISION=0003
E: ID_SERIAL=SunplusIT_INC._Integrated_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SunplusIT_INC.
E: ID_VENDOR_ENC=SunplusIT\x20INC.
E: ID_VENDOR_ID=5986
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=479500
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0292e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/292/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=60009
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=60073
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Dock Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=60260
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=60583
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=9960617
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=60648
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Dock Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=9960690
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=60728
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=9960772
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=60804
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB54-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab54
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=886
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=40600
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input5
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input5
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=15
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=79399
P: /devices/platform/i8042/serio1/input/input5/event5
N: input/event5
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/i8042/serio1/input/input5/event5
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=79774
P: /devices/platform/i8042/serio1/input/input5/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input5/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=79585
P: /devices/platform/i8042/serio1/serio2/input/input7
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input7
E: EV=7
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ae0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="TPPS/2 IBM TrackPoint"
E: PHYS="synaptics-pt/serio0/input0"
E: PRODUCT=11/2/a/0
E: PROP=0
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=271007
P: /devices/platform/i8042/serio1/serio2/input/input7/event13
N: input/event13
S: input/by-path/platform-i8042-serio-2-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input7/event13
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=271118
P: /devices/platform/i8042/serio1/serio2/input/input7/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-2-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input7/mouse1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=271100
P: /devices/platform/pcspkr/input/input6
E: DEVPATH=/devices/platform/pcspkr/input/input6
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=58405
P: /devices/platform/pcspkr/input/input6/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/pcspkr/input/input6/event4
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=60015
P: /devices/platform/thinkpad_acpi/input/input8
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input8
E: EV=33
E: ID_FOR_SEAT=input-platform-thinkpad_acpi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEY=18040000 0 10000000000000 0 1501b02102004 c000080021104000
10e000000000000 0
E: MODALIAS=input:b0019v17AAp5054e4101-e0,1,4,5,k71,72,73,78,8E,94,98,9D,AB,BE,BF,C2,CD,D4,D9,E0,E1,E3,E4,EC,EE,F0,174,1D2,1DB,1DC,ram4,lsfw3,
E: MSC=10
E: NAME="ThinkPad Extra Buttons"
E: PHYS="thinkpad_acpi/input0"
E: PRODUCT=19/17aa/5054/4101
E: PROP=0
E: SUBSYSTEM=input
E: SW=8
E: TAGS=:seat:
E: USEC_INITIALIZED=23037
P: /devices/platform/thinkpad_acpi/input/input8/event6
N: input/event6
S: input/by-path/platform-thinkpad_acpi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-thinkpad_acpi-event
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input8/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEYBOARD_KEY_01=screenlock
E: KEYBOARD_KEY_02=battery
E: KEYBOARD_KEY_03=sleep
E: KEYBOARD_KEY_04=wlan
E: KEYBOARD_KEY_06=switchvideomode
E: KEYBOARD_KEY_07=f21
E: KEYBOARD_KEY_08=f24
E: KEYBOARD_KEY_0b=suspend
E: KEYBOARD_KEY_0f=brightnessup
E: KEYBOARD_KEY_10=brightnessdown
E: KEYBOARD_KEY_11=kbdillumtoggle
E: KEYBOARD_KEY_13=zoom
E: KEYBOARD_KEY_14=volumeup
E: KEYBOARD_KEY_15=volumedown
E: KEYBOARD_KEY_16=mute
E: KEYBOARD_KEY_17=prog1
E: KEYBOARD_KEY_1a=f20
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=23162
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.690401] Linux agpgart interface v0.103
[ 8.084176] [drm] Initialized drm 1.1.0 20060810
[ 8.485825] [drm] Memory usable by graphics device = 2048M
[ 8.485827] [drm] Replacing VGA console driver
[ 8.485831] fb: switching to inteldrmfb from simple
[ 8.507565] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.507566] [drm] Driver supports precise vblank timestamp query.
[ 8.527362] [drm] VBT doesn't support DRRS
[ 8.631452] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to
bit banging on pin 5
[ 8.648189] fbcon: inteldrmfb (fb0) is primary device
[ 9.715946] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.748447] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.775163] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 299.831308] [drm:drm_edid_block_valid] *ERROR* EDID checksum is
invalid, remainder is 6
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.113
ii libaudit1 1:2.4-1
ii libc6 2.19-11
iu libdrm2 2.4.58-2
ii libegl1-mesa 10.2.8-1
ii libepoxy0 1.2-1
ii libgbm1 10.2.8-1
ii libgcrypt20 1.6.2-3
ii libgl1-mesa-glx [libgl1] 10.2.8-1
ii libpciaccess0 0.13.2-3
ii libpixman-1-0 0.32.6-3
ii libselinux1 2.3-2
ii libudev1 215-5+b1
ii libxau6 1:1.0.8-1
ii libxdmcp6 1:1.1.1-1
ii libxfont1 1:1.4.99.901-1
iu libxshmfence1 1.1-4
ii udev 215-5+b1
ii xserver-common 2:1.16.1-1
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 10.2.8-1
Versions of packages xserver-xorg-core suggests:
ii xfonts-100dpi 1:1.0.3
ii xfonts-75dpi 1:1.0.3
ii xfonts-scalable 1:1.0.3-1
-- no debconf information
Reply to: