Bug#758217: xserver-xorg-video-nouveau: Nvidia card no more listed in 'xrandr --listproviders' on Optimus laptop

To: 758217@bugs.debian.org
Cc: Sven Joachim <svenjoac@gmx.de>, maarten.lankhorst@canonical.com
Subject: Bug#758217: xserver-xorg-video-nouveau: Nvidia card no more listed in 'xrandr --listproviders' on Optimus laptop
From: Marco Mattiolo <marco.mattiolo@hotmail.it>
Date: Tue, 19 Aug 2014 00:12:04 +0200
Message-id: <[🔎] BLU436-SMTP135D304DB3839747EFE4D57E6D40@phx.gbl>
Reply-to: Marco Mattiolo <marco.mattiolo@hotmail.it>, 758217@bugs.debian.org
In-reply-to: <[🔎] 87ha1ba5tg.fsf@turtle.gmx.de>
References: <[🔎] BLU436-SMTP222C35F481E23F68660349FE6E90@phx.gbl> <[🔎] 87ha1ba5tg.fsf@turtle.gmx.de>

Il 17/08/2014 10:17, Sven Joachim ha scritto:

On 2014-08-15 15:18 +0200, Marco Mattiolo wrote:

On my Optimus laptop, the nVidia card is no more listed:
$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x8d cap: 0xb, Source Output, Sink Output, Sink
Offload crtcs: 2 outputs: 4 associated providers: 0 name:Intel

although present
$ lspci|grep NVIDIA
01:00.0 3D controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1)

It used to get listed by xrandr few weeks ago, (as in [1]) but I
cannot recall when it stopped,

A month ago the X server was upgraded from 1.15 to 1.16, that would seem
the most obvious candidate.  The nouveau driver has not seen any source
uploads for nine months.

as launching programs with 'DRI_PRIME=1' failsafe using Intel card.

As in [2], I checked and found no xorg.conf, no nouveau blacklisting
in /etc/modprobe.d/, no NVDIA driver installed.
Also, there's no bumblebee installation, as in [3].
As you can see in Xorg.0.log 21.061 line, Nvidia GPU gets 'removed'
for some unknown reason.

It might be a good idea to ask for help on the #nouveau IRC channel on
freenode.  I don't have an Optimus laptop, so I can't help.

Cheers,
        Sven

Hi Sven, thank you for answering!

First, I noticed that on some boot xrandr --listproviders output onlythe Intel integrated card, else it lists two cards, the Intel and a"modesetting" one.


As your advise, I asked on #nouveau ([1] from 06:39 to 07:45),
got pointed to two patches, which I've just tried.

First patch [2] results in xrandr listing only Intel card (dmesg andXorg log attached).

Second patch, from Maarten (which I've cc-ed) results in errors in dmesg:
[   11.167571] nouveau E[ DEVINIT][0000:01:00.0] init failed, -22
[   11.167642] nouveau E[     DRM] failed to create 0x80000080, -22
[   11.168283] nouveau: probe of 0000:01:00.0 failed with error -22

Hope this helps finding out the problem
Regards
Marco

[1]http://people.freedesktop.org/~cbrill/dri-log/index.php?channel=nouveau&date=2014-08-18

[2] http://lists.freedesktop.org/archives/xorg-devel/2014-August/043447.html

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cad35fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cad36000-0x00000000cad8dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cad8e000-0x00000000cad9dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cad9e000-0x00000000cad9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cada0000-0x00000000cada1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cada2000-0x00000000cadb7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cadb8000-0x00000000cadbdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cadbe000-0x00000000cade7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cade8000-0x00000000caf31fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caf32000-0x00000000cafe7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cafe8000-0x00000000caffcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caffd000-0x00000000caffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. RC530/RC730/RC530/RC730, BIOS 02WD.M007.20110810.PSA 08/10/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 base 0C8000000 mask FFC000000 write-back
[    0.000000]   4 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FE0000000 write-back
[    0.000000]   7 base 220000000 mask FF0000000 write-back
[    0.000000]   8 base 22FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcaffd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc90-0x000fcc9f] mapped at [ffff8800000fcc90]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
[    0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
[    0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
[    0.000000]  [mem 0x22fc00000-0x22fdfffff] page 2M
[    0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
[    0.000000]  [mem 0x22c000000-0x22fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[    0.000000]  [mem 0x200000000-0x22bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xcad35fff]
[    0.000000]  [mem 0x40200000-0xcabfffff] page 2M
[    0.000000]  [mem 0xcac00000-0xcad35fff] page 4k
[    0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE
[    0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcad8e000-0xcad9dfff]
[    0.000000]  [mem 0xcad8e000-0xcad9dfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcada0000-0xcada1fff]
[    0.000000]  [mem 0xcada0000-0xcada1fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcadb8000-0xcadbdfff]
[    0.000000]  [mem 0xcadb8000-0xcadbdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcade8000-0xcaf31fff]
[    0.000000]  [mem 0xcade8000-0xcaf31fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcafe8000-0xcaffcfff]
[    0.000000]  [mem 0xcafe8000-0xcaffcfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x360d6000-0x37062fff]
[    0.000000] ACPI: RSDP 00000000000f0430 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000caffee18 00006C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000caf9bd98 0000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xCAFE5E40/0x00000000CAFE5D40, using 32-bit address (20131218/tbfadt-271)
[    0.000000] ACPI: DSDT 00000000caf92018 0085A3 (v01 SECCSD LH43STAR 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 00000000cafe5e40 000040
[    0.000000] ACPI: APIC 00000000caffdf18 0000CC (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: HPET 00000000cafe6d18 000038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
[    0.000000] ACPI: SLIC 00000000caf9cc18 000176 (v01 SECCSD LH43STAR 06222004 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000cafe6c98 00003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000caf91018 000A5F (v01  PmRef  Cpu0Ist 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf90018 000996 (v01  PmRef    CpuPm 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf8c018 000D80 (v01  SgRef   SgTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf79018 0011E1 (v01 OptRef  OptTabl 00001000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
[    0.000000]   NODE_DATA [mem 0x22fdf4000-0x22fdf8fff]
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227400000-ffff88022e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x22fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xcad35fff]
[    0.000000]   node   0: [mem 0xcad8e000-0xcad9dfff]
[    0.000000]   node   0: [mem 0xcada0000-0xcada1fff]
[    0.000000]   node   0: [mem 0xcadb8000-0xcadbdfff]
[    0.000000]   node   0: [mem 0xcade8000-0xcaf31fff]
[    0.000000]   node   0: [mem 0xcafe8000-0xcaffcfff]
[    0.000000]   node   0: [mem 0x100000000-0x22fdfffff]
[    0.000000] On node 0 totalpages: 2074698
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 157 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11294 pages used for memmap
[    0.000000]   DMA32 zone: 826029 pages, LIFO batch:31
[    0.000000]   Normal zone: 17017 pages used for memmap
[    0.000000]   Normal zone: 1244672 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcad36000-0xcad8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcad9e000-0xcad9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcada2000-0xcadb7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcadbe000-0xcade7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaf32000-0xcafe7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaffd000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s86080 r8192 d24512 u131072
[    0.000000] pcpu-alloc: s86080 r8192 d24512 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2046174
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8086328K/8298792K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 212464K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS:33024 nr_irqs:808 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.073 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.14 BogoMIPS (lpj=8780292)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20131218
[    0.005586] ACPI: All ACPI Tables successfully acquired
[    0.011066] Security Framework initialized
[    0.011074] AppArmor: AppArmor disabled by boot time parameter
[    0.011075] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011581] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013350] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014107] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014116] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014314] Initializing cgroup subsys memory
[    0.014321] Initializing cgroup subsys devices
[    0.014322] Initializing cgroup subsys freezer
[    0.014323] Initializing cgroup subsys net_cls
[    0.014325] Initializing cgroup subsys blkio
[    0.014326] Initializing cgroup subsys perf_event
[    0.014350] CPU: Physical Processor ID: 0
[    0.014351] CPU: Processor Core ID: 0
[    0.014356] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014356] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014358] mce: CPU supports 9 MCE banks
[    0.014372] CPU0: Thermal monitoring enabled (TM1)
[    0.014382] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014382] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014382] tlb_flushall_shift: 6
[    0.014478] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000)
[    0.016045] Switched APIC routing to physical flat.
[    0.016464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056105] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (fam: 06, model: 2a, stepping: 07)
[    0.056113] TSC deadline timer enabled
[    0.056122] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.056128] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.056131] ... version:                3
[    0.056132] ... bit width:              48
[    0.056132] ... generic registers:      4
[    0.056134] ... value mask:             0000ffffffffffff
[    0.056135] ... max period:             0000ffffffffffff
[    0.056136] ... fixed-purpose events:   3
[    0.056137] ... event mask:             000000070000000f
[    0.056730] x86: Booting SMP configuration:
[    0.056732] .... node  #0, CPUs:        #1
[    0.069992] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070091]   #2  #3  #4  #5  #6  #7
[    0.149410] x86: Booted up 1 node, 8 CPUs
[    0.149415] smpboot: Total of 8 processors activated (35121.16 BogoMIPS)
[    0.156918] devtmpfs: initialized
[    0.160184] PM: Registering ACPI NVS region [mem 0xcaf32000-0xcafe7fff] (745472 bytes)
[    0.160365] pinctrl core: initialized pinctrl subsystem
[    0.160432] NET: Registered protocol family 16
[    0.160526] cpuidle: using governor ladder
[    0.160528] cpuidle: using governor menu
[    0.160556] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160558] ACPI: bus type PCI registered
[    0.160560] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.160664] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.160667] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.160752] PCI: Using configuration type 1 for base access
[    0.161104] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.161106] mtrr: probably your BIOS does not setup all CPUs.
[    0.161106] mtrr: corrected configuration.
[    0.161800] bio: create slab <bio-0> at 0
[    0.161943] ACPI: Added _OSI(Module Device)
[    0.161945] ACPI: Added _OSI(Processor Device)
[    0.161946] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161947] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164551] ACPI: Executed 1 blocks of module-level executable AML code
[    0.212679] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.220849] ACPI: SSDT 00000000cadd3718 000661 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.221189] ACPI: Dynamic OEM Table Load:
[    0.221191] ACPI: SSDT           (null) 000661 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.231983] ACPI: SSDT 00000000cadd4a98 000303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.232353] ACPI: Dynamic OEM Table Load:
[    0.232355] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.243834] ACPI: SSDT 00000000cadd2d98 000119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    0.244162] ACPI: Dynamic OEM Table Load:
[    0.244164] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    1.104606] ACPI: Interpreter enabled
[    1.104630] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    1.104635] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    1.104649] ACPI: (supports S0 S3 S4 S5)
[    1.104650] ACPI: Using IOAPIC for interrupt routing
[    1.104679] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.104861] ACPI: No dock devices found.
[    1.122857] ACPI: Power Resource [FN00] (off)
[    1.122955] ACPI: Power Resource [FN01] (off)
[    1.123550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.123556] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.123592] \_SB_.PCI0:_OSC invalid UUID
[    1.123593] _OSC request data:1 1f 0 
[    1.123597] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.124239] PCI host bridge to bus 0000:00
[    1.124242] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.124244] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.124246] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.124247] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.124249] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.124251] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.124253] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.124254] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.124256] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.124258] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.124260] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[    1.124267] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    1.124363] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    1.124397] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.124482] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    1.124493] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
[    1.124500] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.124504] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    1.124618] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    1.124643] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
[    1.124721] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.124818] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    1.124840] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff]
[    1.124933] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.125025] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    1.125042] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
[    1.125118] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.125205] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    1.125287] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.125338] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.125384] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    1.125466] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.125515] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.125569] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    1.125592] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff]
[    1.125684] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.125772] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    1.125958] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    1.125979] pci 0000:00:1f.2: reg 0x10: [io  0xe0b0-0xe0b7]
[    1.125987] pci 0000:00:1f.2: reg 0x14: [io  0xe0a0-0xe0a3]
[    1.125996] pci 0000:00:1f.2: reg 0x18: [io  0xe090-0xe097]
[    1.126004] pci 0000:00:1f.2: reg 0x1c: [io  0xe080-0xe083]
[    1.126013] pci 0000:00:1f.2: reg 0x20: [io  0xe060-0xe07f]
[    1.126022] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff]
[    1.126069] pci 0000:00:1f.2: PME# supported from D3hot
[    1.126151] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    1.126167] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit]
[    1.126189] pci 0000:00:1f.3: reg 0x20: [io  0xe040-0xe05f]
[    1.126338] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030200
[    1.126346] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
[    1.126355] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.126364] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.126370] pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
[    1.126377] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
[    1.131330] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.131338] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.131344] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
[    1.131353] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.131681] pci 0000:02:00.0: [8086:0896] type 00 class 0x028000
[    1.131866] pci 0000:02:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
[    1.132644] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.139450] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.139467] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.139471] pci 0000:00:1c.0:   bridge window [mem 0xf7200000-0xf7bfffff]
[    1.139478] pci 0000:00:1c.0:   bridge window [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.139635] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.139700] pci 0000:03:00.0: reg 0x10: [io  0xb000-0xb0ff]
[    1.139815] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    1.139890] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    1.140298] pci 0000:03:00.0: supports D1 D2
[    1.140300] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.147374] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.147383] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    1.147392] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
[    1.147406] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.147669] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.147727] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.147780] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.147831] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    1.147884] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.147936] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.147989] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    1.148041] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    1.148554] ACPI: Enabled 6 GPEs in block 00 to 3F
[    1.148598] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.152437] ACPI : EC: 0 stale EC events cleared
[    1.152598] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.152601] vgaarb: loaded
[    1.152602] vgaarb: bridge control possible 0000:00:02.0
[    1.152639] PCI: Using ACPI for IRQ routing
[    1.154223] PCI: pci_cache_line_size set to 64 bytes
[    1.154319] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.154321] e820: reserve RAM buffer [mem 0xcad36000-0xcbffffff]
[    1.154323] e820: reserve RAM buffer [mem 0xcad9e000-0xcbffffff]
[    1.154325] e820: reserve RAM buffer [mem 0xcada2000-0xcbffffff]
[    1.154327] e820: reserve RAM buffer [mem 0xcadbe000-0xcbffffff]
[    1.154329] e820: reserve RAM buffer [mem 0xcaf32000-0xcbffffff]
[    1.154330] e820: reserve RAM buffer [mem 0xcaffd000-0xcbffffff]
[    1.154332] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[    1.154452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.154457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.157481] Switched to clocksource hpet
[    1.159405] pnp: PnP ACPI init
[    1.159419] ACPI: bus type PNP registered
[    1.159486] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.159558] system 00:01: [io  0x06a4] has been reserved
[    1.159560] system 00:01: [io  0x06a0] has been reserved
[    1.159562] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.159572] pnp 00:02: [dma 4]
[    1.159593] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.159619] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    1.159723] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.159755] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.159802] system 00:06: [io  0x0680-0x069f] has been reserved
[    1.159804] system 00:06: [io  0x1000-0x100f] has been reserved
[    1.159806] system 00:06: [io  0xffff] has been reserved
[    1.159808] system 00:06: [io  0xffff] has been reserved
[    1.159810] system 00:06: [io  0x0400-0x0453] could not be reserved
[    1.159812] system 00:06: [io  0x0458-0x047f] has been reserved
[    1.159814] system 00:06: [io  0x0500-0x057f] has been reserved
[    1.159816] system 00:06: [io  0x0a00-0x0a03] has been reserved
[    1.159818] system 00:06: [io  0x164e-0x164f] has been reserved
[    1.159820] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.159868] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.159913] system 00:08: [io  0x0454-0x0457] has been reserved
[    1.159915] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.159966] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.160020] pnp 00:0a: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    1.160236] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.160238] system 00:0b: [mem 0xfed10000-0xfed17fff] could not be reserved
[    1.160240] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.160243] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.160245] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.160247] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.160249] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.160251] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.160253] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[    1.160255] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.160257] system 00:0b: [mem 0xcfa00000-0xcfa00fff] has been reserved
[    1.160259] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.160820] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    1.160823] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[    1.160825] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.160836] pnp: PnP ACPI: found 13 devices
[    1.160837] ACPI: bus type PNP unregistered
[    1.167466] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.167469] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.167472] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
[    1.167475] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.167478] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.167481] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.167487] pci 0000:00:1c.0:   bridge window [mem 0xf7200000-0xf7bfffff]
[    1.167491] pci 0000:00:1c.0:   bridge window [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.167498] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.167501] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    1.167506] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
[    1.167511] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.167518] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.167520] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.167521] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.167523] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.167525] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.167526] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.167528] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.167530] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.167531] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.167533] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
[    1.167535] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.167536] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
[    1.167538] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.167540] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    1.167542] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf7bfffff]
[    1.167543] pci_bus 0000:02: resource 2 [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.167545] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    1.167547] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
[    1.167548] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.167636] NET: Registered protocol family 2
[    1.167872] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.168042] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.168179] TCP: Hash tables configured (established 65536 bind 65536)
[    1.168198] TCP: reno registered
[    1.168210] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.168243] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.168359] NET: Registered protocol family 1
[    1.168371] pci 0000:00:02.0: Boot video device
[    1.168732] PCI: CLS 64 bytes, default 64
[    1.168775] Unpacking initramfs...
[    1.479172] Freeing initrd memory: 15924K (ffff8800360d6000 - ffff880037063000)
[    1.479178] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.479180] software IO TLB [mem 0xc6d36000-0xcad36000] (64MB) mapped at [ffff8800c6d36000-ffff8800cad35fff]
[    1.479576] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.479630] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479638] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479647] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479656] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479665] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479675] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479682] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479690] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
[    1.479745] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.480183] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    1.480276] audit: initializing netlink subsys (disabled)
[    1.480292] audit: type=2000 audit(1408392647.464:1): initialized
[    1.494600] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.494853] VFS: Disk quotas dquot_6.5.2
[    1.494889] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.494956] msgmni has been set to 15824
[    1.495202] alg: No test for stdrng (krng)
[    1.495230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.495282] io scheduler noop registered
[    1.495283] io scheduler deadline registered
[    1.495308] io scheduler cfq registered (default)
[    1.495480] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.495763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.495779] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.495815] intel_idle: MWAIT substates: 0x21120
[    1.495816] intel_idle: v0.4 model 0x2A
[    1.495817] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.496166] GHES: HEST is not enabled!
[    1.496220] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.496674] Linux agpgart interface v0.103
[    1.496794] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[    1.500383] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.500387] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.500510] mousedev: PS/2 mouse device common for all mice
[    1.500684] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.500713] rtc_cmos 00:07: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.500722] Intel P-state driver initializing.
[    1.500732] Intel pstate controlling: cpu 0
[    1.500751] Intel pstate controlling: cpu 1
[    1.500766] Intel pstate controlling: cpu 2
[    1.500781] Intel pstate controlling: cpu 3
[    1.500796] Intel pstate controlling: cpu 4
[    1.500815] Intel pstate controlling: cpu 5
[    1.500830] Intel pstate controlling: cpu 6
[    1.500845] Intel pstate controlling: cpu 7
[    1.500880] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.500881] AMD IOMMUv2 functionality not available on this system
[    1.500989] TCP: cubic registered
[    1.501123] NET: Registered protocol family 10
[    1.501424] mip6: Mobile IPv6
[    1.501434] NET: Registered protocol family 17
[    1.501437] mpls_gso: MPLS GSO support
[    1.501812] registered taskstats version 1
[    1.502353] rtc_cmos 00:07: setting system clock to 2014-08-18 20:10:47 UTC (1408392647)
[    1.502456] PM: Hibernation image not present or could not be loaded.
[    1.502763] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.503063] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000)
[    1.503064] Write protecting the kernel read-only data: 8192k
[    1.505852] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
[    1.508044] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
[    1.517591] systemd-udevd[88]: starting version 208
[    1.517886] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.529892] ACPI: Fan [FAN0] (off)
[    1.530849] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.530861] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.531033] ACPI: bus type USB registered
[    1.531081] usbcore: registered new interface driver usbfs
[    1.531098] usbcore: registered new interface driver hub
[    1.531118] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    1.531239] usbcore: registered new device driver usb
[    1.531326] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000000e000, e8:11:32:9d:94:26, XID 0c900800 IRQ 41
[    1.531329] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.531713] SCSI subsystem initialized
[    1.531789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.531974] ehci-pci: EHCI PCI platform driver
[    1.532104] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.532112] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.532128] ehci-pci 0000:00:1a.0: debug port 2
[    1.532934] libata version 3.00 loaded.
[    1.535033] ACPI: Invalid active2 threshold
[    1.536037] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.536054] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c08000
[    1.544937] thermal LNXTHERM:00: registered as thermal_zone0
[    1.544939] ACPI: Thermal Zone [TZ00] (56 C)
[    1.545121] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.545154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.545156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.545158] usb usb1: Product: EHCI Host Controller
[    1.545159] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    1.545160] usb usb1: SerialNumber: 0000:00:1a.0
[    1.545261] hub 1-0:1.0: USB hub found
[    1.545266] hub 1-0:1.0: 2 ports detected
[    1.545437] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.545442] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.545456] ehci-pci 0000:00:1d.0: debug port 2
[    1.549355] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.549390] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000
[    1.559967] thermal LNXTHERM:01: registered as thermal_zone1
[    1.559969] ACPI: Thermal Zone [TZ01] (56 C)
[    1.560088] ACPI: Fan [FAN1] (off)
[    1.561051] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.561086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.561096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.561097] usb usb2: Product: EHCI Host Controller
[    1.561098] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    1.561099] usb usb2: SerialNumber: 0000:00:1d.0
[    1.561251] hub 2-0:1.0: USB hub found
[    1.561255] hub 2-0:1.0: 2 ports detected
[    1.561342] ahci 0000:00:1f.2: version 3.0
[    1.561450] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.561494] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.561496] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.569622] scsi0 : ahci
[    1.569841] scsi1 : ahci
[    1.569989] scsi2 : ahci
[    1.570131] scsi3 : ahci
[    1.570245] scsi4 : ahci
[    1.570352] scsi5 : ahci
[    1.570388] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 42
[    1.570389] ata2: DUMMY
[    1.570391] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 42
[    1.570392] ata4: DUMMY
[    1.570393] ata5: DUMMY
[    1.570393] ata6: DUMMY
[    1.856765] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.888819] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.892825] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.894929] ata3.00: ATAPI: TSSTcorp CDDVDW TS-L633J, SC01, max UDMA/100
[    1.900779] ata3.00: configured for UDMA/100
[    1.914618] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.914628] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.949127] ata1.00: configured for UDMA/133
[    1.949615] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  CXM0 PQ: 0 ANSI: 5
[    1.955636] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633J  SC01 PQ: 0 ANSI: 5
[    1.961162] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.961193] sd 0:0:0:0: [sda] Write Protect is off
[    1.961195] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.961205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.968949]  sda: sda1 sda2
[    1.969197] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.972402] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.972404] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.972516] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.973008] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.973051] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.989006] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.989009] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.989288] hub 1-1:1.0: USB hub found
[    1.989371] hub 1-1:1.0: 6 ports detected
[    2.100644] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.232731] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.232741] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.233391] hub 2-1:1.0: USB hub found
[    2.233481] hub 2-1:1.0: 6 ports detected
[    2.304581] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    2.398362] usb 1-1.2: New USB device found, idVendor=041e, idProduct=415a
[    2.398372] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=4
[    2.398376] usb 1-1.2: Product: Zen_Stone_Plus
[    2.398380] usb 1-1.2: Manufacturer: CREATIVE
[    2.398383] usb 1-1.2: SerialNumber: 31383444313439304230453032313033
[    2.401768] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    2.402223] scsi6 : usb-storage 1-1.2:1.0
[    2.402440] usbcore: registered new interface driver usb-storage
[    2.468286] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.476063] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.718941] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1008
[    2.718952] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.718957] usb 1-1.4: Product: WebCam SCB-1100N
[    2.718961] usb 1-1.4: Manufacturer: 123
[    2.959873] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    3.056383] usb 2-1.3: New USB device found, idVendor=8086, idProduct=0189
[    3.056393] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.127562] usb 2-1.5: new low-speed USB device number 4 using ehci-pci
[    3.226138] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c05f
[    3.226147] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.226152] usb 2-1.5: Product: USB Optical Mouse
[    3.226156] usb 2-1.5: Manufacturer: Logitech
[    3.229345] hidraw: raw HID events driver (C) Jiri Kosina
[    3.234115] usbcore: registered new interface driver usbhid
[    3.234121] usbhid: USB HID core driver
[    3.234878] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05F.0001/input/input2
[    3.235024] hid-generic 0003:046D:C05F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[    3.311300] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.401058] scsi 6:0:0:0: Direct-Access     CREATIVE ZEN_Stone_Plus_S      PQ: 0 ANSI: 0 CCS
[    3.401877] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.402543] sd 6:0:0:0: [sdb] 3921920 512-byte logical blocks: (2.00 GB/1.87 GiB)
[    3.403394] sd 6:0:0:0: [sdb] Write Protect is off
[    3.403400] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[    3.404092] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.404162] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.407091] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.407159] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.408385]  sdb: sdb1
[    3.411311] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.411392] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.411468] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.475404] Switched to clocksource tsc
[    4.232958] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    4.349037] systemd[1]: Inserted module 'autofs4'
[    4.349463] systemd[1]: Set hostname to <matt-picci>.
[    4.362262] random: nonblocking pool is initialized
[    7.469801] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.470540] systemd[1]: Starting Syslog Socket.
[    7.470721] systemd[1]: Listening on Syslog Socket.
[    7.470755] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.470894] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.470921] systemd[1]: Starting Remote File Systems (Pre).
[    7.470946] systemd[1]: Reached target Remote File Systems (Pre).
[    7.470969] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.471017] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.471037] systemd[1]: Starting Delayed Shutdown Socket.
[    7.471081] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.471157] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.471365] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.471399] systemd[1]: Starting Journal Socket.
[    7.471483] systemd[1]: Listening on Journal Socket.
[    7.471516] systemd[1]: Starting LSB: live-config - System Configuration Components...
[    7.472482] systemd[1]: Starting Syslog.
[    7.472512] systemd[1]: Reached target Syslog.
[    7.472749] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.473514] systemd[1]: Mounting Huge Pages File System...
[    7.502725] systemd[1]: Starting Apply Kernel Variables...
[    7.503564] systemd[1]: Starting Journal Service...
[    7.504258] systemd[1]: Started Journal Service.
[    7.656407] lp: driver loaded but no devices found
[    7.665346] ppdev: user-space parallel port driver
[    7.689000] fuse init (API version 7.22)
[    7.709262] loop: module loaded
[    7.713727] systemd-udevd[222]: starting version 208
[    8.972442] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    9.260595] AVX version of gcm_enc/dec engaged.
[    9.262127] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    9.274427] alg: No test for crc32 (crc32-pclmul)
[    9.347022] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    9.362870] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[    9.362903] ACPI: Lid Switch [LID0]
[    9.362948] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[    9.362951] ACPI: Power Button [PWRB]
[    9.362997] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[    9.362999] ACPI: Sleep Button [SLPB]
[    9.363034] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    9.363035] ACPI: Power Button [PWRF]
[    9.363658] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.365309] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
[    9.365316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.365320] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    9.365325] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    9.365328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.365330] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    9.365334] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    9.365338] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.365340] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    9.365342] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    9.365346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.365348] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.365905] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    9.365931] ACPI: AC Adapter [ADP1] (on-line)
[    9.368316] wmi: Mapper loaded
[    9.370097] [drm] Initialized drm 1.1.0 20060810
[    9.387210] ACPI: Battery Slot [BAT1] (battery absent)
[    9.399924] cfg80211: Calling CRDA to update world regulatory domain
[    9.404620] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    9.404624] Copyright(c) 2003- 2014 Intel Corporation
[    9.404827] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.405101] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[    9.407934] MXM: GUID detected in BIOS
[    9.408021] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.408083] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.408213] pci 0000:00:02.0: optimus capabilities: enabled, status dynamic power, 
[    9.408245] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.408280] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.408387] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 
[    9.408389] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    9.408570] [drm] hdmi device  not found 1 0 1
[    9.408721] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0c1a00a1
[    9.408724] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[    9.408727] nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
[    9.408760] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    9.418477] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    9.418479] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    9.418537] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    9.418539] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[    9.433511] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[    9.433683] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    9.440550] iTCO_vendor_support: vendor-support=0
[    9.443646] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    9.443688] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    9.443800] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.450007] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    9.450010] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    9.450012] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    9.450013] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    9.450113] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    9.479469] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.649199] ACPI Warning: SystemIO range 0x000000000000e040-0x000000000000e05f conflicts with OpRegion 0x000000000000e040-0x000000000000e04f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[    9.649226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.724766] media: Linux media interface: v0.10
[    9.731225] Linux video capture interface: v2.00
[    9.750576] Bluetooth: Core ver 2.18
[    9.750593] NET: Registered protocol family 31
[    9.750595] Bluetooth: HCI device and connection manager initialized
[    9.750604] Bluetooth: HCI socket layer initialized
[    9.750608] Bluetooth: L2CAP socket layer initialized
[    9.750621] Bluetooth: SCO socket layer initialized
[    9.754205] uvcvideo: Found UVC 1.00 device WebCam SCB-1100N (2232:1008)
[    9.754372] usbcore: registered new interface driver btusb
[    9.773426] input: WebCam SCB-1100N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9
[    9.773515] usbcore: registered new interface driver uvcvideo
[    9.773518] USB Video Class driver (1.1.1)
[    9.800971] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    9.824327] cfg80211: World regulatory domain updated:
[    9.824331] cfg80211:  DFS Master region: unset
[    9.824333] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.824335] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    9.824337] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    9.824338] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    9.824340] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    9.824341] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    9.824343] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    9.840002] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.840100] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.840154] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.985248] samsung_laptop: detected SABI interface: SwSmi@
[    9.985252] samsung_laptop: Backlight controlled by ACPI video driver
[   10.014616] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
[   10.018359] systemd-journald[192]: Received request to flush runtime journal from PID 1
[   10.273341] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   10.287333] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
[   10.359648] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[   10.987645] RPC: Registered named UNIX socket transport module.
[   10.987653] RPC: Registered udp transport module.
[   10.987656] RPC: Registered tcp transport module.
[   10.987659] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.025072] FS-Cache: Loaded
[   11.066750] FS-Cache: Netfs 'nfs' registered for caching
[   11.143011] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.330859] vboxdrv: Found 8 processor cores.
[   11.331107] vboxdrv: fAsync=0 offMin=0x3f4 offMax=0x1b62
[   11.331189] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   11.331190] vboxdrv: Successfully loaded version 4.3.14_Debian (interface 0x001a0007).
[   11.356708] vboxpci: IOMMU not found (not registered)
[   11.596331] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.596335] Bluetooth: BNEP filters: protocol multicast
[   11.596341] Bluetooth: BNEP socket layer initialized
[   12.322717] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   12.431167] r8169 0000:03:00.0 eth0: link down
[   12.431234] r8169 0000:03:00.0 eth0: link down
[   12.431236] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.432523] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   12.439185] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   12.508677] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   12.515367] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   12.631118] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.983241] r8169 0000:03:00.0 eth0: link up
[   13.983330] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.459219] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   14.459229] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[   14.459515] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   14.459523] nouveau  [   VBIOS][0000:01:00.0] version 70.08.58.00.03
[   14.460744] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[   14.460759] nouveau  [   VBIOS][0000:01:00.0] running init tables
[   14.578481] nouveau 0000:01:00.0: irq 46 for MSI/MSI-X
[   14.578493] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   14.578522] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff8802267dc800] reclocking of this ram type unsupported
[   14.578524] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[   14.578526] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   14.578527] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   14.580083] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 850000uv
[   14.603374] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   14.603380] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   14.603383] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   14.603408] nouveau  [     CLK][0000:01:00.0] 07: core 202 MHz memory 324 MHz 
[   14.603411] nouveau  [     CLK][0000:01:00.0] 0f: core 672 MHz memory 900 MHz 
[   14.603548] nouveau  [     CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz 
[   14.607313] [TTM] Zone  kernel: Available graphics memory: 4052390 kiB
[   14.607316] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   14.607317] [TTM] Initializing pool allocator
[   14.607322] [TTM] Initializing DMA pool allocator
[   14.607332] nouveau  [     DRM] VRAM: 1024 MiB
[   14.607333] nouveau  [     DRM] GART: 1048576 MiB
[   14.607337] nouveau  [     DRM] TMDS table version 2.0
[   14.607338] nouveau  [     DRM] DCB version 4.0
[   14.607340] nouveau  [     DRM] DCB outp 00: 02010300 00000000
[   14.607341] nouveau  [     DRM] DCB conn 00: 00000100
[   14.607352] nouveau  [     DRM] DCB conn 07: 00010746
[   14.607353] nouveau  [     DRM] DCB conn 08: 00020846
[   14.607355] nouveau  [     DRM] DCB conn 09: 00000900
[   14.608034] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.608035] [drm] Driver supports precise vblank timestamp query.
[   14.608037] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[   14.613855] nouveau  [     DRM] MM: using COPY0 for buffer copies
[   14.613869] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[   14.614180] [drm] Memory usable by graphics device = 2048M
[   14.638623] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[   14.638650] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.638653] [drm] Driver supports precise vblank timestamp query.
[   14.638862] vga_switcheroo: enabled
[   14.638978] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   14.666481] [drm] Wrong MCH_SSKPD value: 0x16040307
[   14.666484] [drm] This can cause pipe underruns and display issues.
[   14.666485] [drm] Please upgrade your BIOS to fix this.
[   14.683555] fbcon: inteldrmfb (fb0) is primary device
[   15.735682] Console: switching to colour frame buffer device 170x48
[   15.741638] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.741642] i915 0000:00:02.0: registered panic notifier
[   15.742072] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   15.769797] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   15.771129] acpi device:47: registered as cooling_device11
[   15.771240] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input13
[   15.773261] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.774468] acpi device:51: registered as cooling_device12
[   15.774581] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14
[   15.774706] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[   15.813409] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   23.807617] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   23.807936] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   23.807948] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   52.780937] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   52.781230] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   52.781241] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   53.004957] wlan0: authenticate with 00:02:cf:be:f4:e6
[   53.016749] wlan0: send auth to 00:02:cf:be:f4:e6 (try 1/3)
[   53.019066] wlan0: authenticated
[   53.019142] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   53.019145] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   53.019146] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   53.020607] wlan0: associate with 00:02:cf:be:f4:e6 (try 1/3)
[   53.022547] wlan0: RX AssocResp from 00:02:cf:be:f4:e6 (capab=0x411 status=0 aid=3)
[   53.025781] wlan0: associated
[   53.025804] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Dave Airlie <airlied at redhat.com>
---
 config/udev.c | 82 ++++++++++++++++++++++++++++++++++++-----------------------
 1 file changed, 50 insertions(+), 32 deletions(-)

diff --git a/config/udev.c b/config/udev.c
index 1e4a9d7..dbe32c4 100644
--- a/config/udev.c
+++ b/config/udev.c
@@ -69,6 +69,23 @@ static const char *itoa(int i)
     return itoa_buf;
 }
 
+static enum { NO, OTHER, GPU } is_drm_device(struct udev_device *device)
+{
+    const char *sysname;
+
+    if (strcmp(udev_device_get_subsystem(device), "drm"))
+	return NO;
+
+    sysname = udev_device_get_sysname(device);
+    if (strncmp(sysname, "card", 4))
+	return OTHER;
+
+    if (strchr(sysname, '-'))
+	return OTHER;
+
+    return GPU;
+}
+
 static void
 device_added(struct udev_device *udev_device)
 {
@@ -87,7 +104,6 @@ device_added(struct udev_device *udev_device)
     dev_t devnum;
 
     path = udev_device_get_devnode(udev_device);
-
     syspath = udev_device_get_syspath(udev_device);
 
     if (!path || !syspath)
@@ -106,21 +122,18 @@ device_added(struct udev_device *udev_device)
     devnum = udev_device_get_devnum(udev_device);
 
 #ifdef CONFIG_UDEV_KMS
-    if (!strcmp(udev_device_get_subsystem(udev_device), "drm")) {
-        const char *sysname = udev_device_get_sysname(udev_device);
-
-        if (strncmp(sysname, "card", 4) != 0)
-            return;
-
-        /* Check for devices already added through xf86platformProbe() */
-        if (xf86_find_platform_device_by_devnum(major(devnum), minor(devnum)))
-            return;
-
-        LogMessage(X_INFO, "config/udev: Adding drm device (%s)\n", path);
-
-        config_udev_odev_setup_attribs(path, syspath, major(devnum),
-                                       minor(devnum), NewGPUDeviceRequest);
-        return;
+    switch (is_drm_device(udev_device)) {
+    case NO:
+	break;
+    case GPU:
+	/* Check for devices already added through xf86platformProbe() */
+	if (!xf86_find_platform_device_by_devnum(major(devnum), minor(devnum))) {
+	    LogMessage(X_INFO, "config/udev: Adding drm device (%s)\n", path);
+	    config_udev_odev_setup_attribs(path, syspath, major(devnum),
+					   minor(devnum), NewGPUDeviceRequest);
+	}
+    case OTHER:
+	return;
     }
 #endif
 
@@ -291,25 +304,30 @@ device_added(struct udev_device *udev_device)
 static void
 device_removed(struct udev_device *device)
 {
-    char *value;
+    dev_t devnum = udev_device_get_devnum(device);
     const char *syspath = udev_device_get_syspath(device);
+    char *value;
 
-#ifdef CONFIG_UDEV_KMS
-    if (!strcmp(udev_device_get_subsystem(device), "drm")) {
-        const char *sysname = udev_device_get_sysname(device);
-        const char *path = udev_device_get_devnode(device);
-        dev_t devnum = udev_device_get_devnum(device);
-
-        if (strncmp(sysname,"card", 4) != 0)
-            return;
-        ErrorF("removing GPU device %s %s\n", syspath, path);
-        if (!path)
-            return;
+    if (syspath == NULL)
+	return;
 
-        config_udev_odev_setup_attribs(path, syspath, major(devnum),
-                                       minor(devnum), DeleteGPUDeviceRequest);
-        /* Retry vtenter after a drm node removal */
-        systemd_logind_vtenter();
+#ifdef CONFIG_UDEV_KMS
+    switch (is_drm_device(device)) {
+    case NO:
+	break;
+    case GPU:
+	if (xf86_find_platform_device_by_devnum(major(devnum), minor(devnum))) {
+	    const char *path = udev_device_get_devnode(device);
+	    if (path) {
+		LogMessage(X_INFO, "config/udev: Removing drm device (%s)\n", path);
+		config_udev_odev_setup_attribs(path, syspath,
+					       major(devnum), minor(devnum),
+					       DeleteGPUDeviceRequest);
+		/* Retry vtenter after a drm node removal */
+		systemd_logind_vtenter();
+	    }
+	}
+    case OTHER:
         return;
     }
 #endif
-- 
2.0.1

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cad35fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cad36000-0x00000000cad8dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cad8e000-0x00000000cad9dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cad9e000-0x00000000cad9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cada0000-0x00000000cada1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cada2000-0x00000000cadb7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cadb8000-0x00000000cadbdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cadbe000-0x00000000cade7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cade8000-0x00000000caf31fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caf32000-0x00000000cafe7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cafe8000-0x00000000caffcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caffd000-0x00000000caffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. RC530/RC730/RC530/RC730, BIOS 02WD.M007.20110810.PSA 08/10/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 base 0C8000000 mask FFC000000 write-back
[    0.000000]   4 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FE0000000 write-back
[    0.000000]   7 base 220000000 mask FF0000000 write-back
[    0.000000]   8 base 22FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcaffd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc90-0x000fcc9f] mapped at [ffff8800000fcc90]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
[    0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
[    0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
[    0.000000]  [mem 0x22fc00000-0x22fdfffff] page 2M
[    0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
[    0.000000]  [mem 0x22c000000-0x22fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[    0.000000]  [mem 0x200000000-0x22bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xcad35fff]
[    0.000000]  [mem 0x40200000-0xcabfffff] page 2M
[    0.000000]  [mem 0xcac00000-0xcad35fff] page 4k
[    0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE
[    0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcad8e000-0xcad9dfff]
[    0.000000]  [mem 0xcad8e000-0xcad9dfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcada0000-0xcada1fff]
[    0.000000]  [mem 0xcada0000-0xcada1fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcadb8000-0xcadbdfff]
[    0.000000]  [mem 0xcadb8000-0xcadbdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcade8000-0xcaf31fff]
[    0.000000]  [mem 0xcade8000-0xcaf31fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcafe8000-0xcaffcfff]
[    0.000000]  [mem 0xcafe8000-0xcaffcfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x360d6000-0x37062fff]
[    0.000000] ACPI: RSDP 00000000000f0430 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000caffee18 00006C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000caf9bd98 0000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xCAFE5E40/0x00000000CAFE5D40, using 32-bit address (20131218/tbfadt-271)
[    0.000000] ACPI: DSDT 00000000caf92018 0085A3 (v01 SECCSD LH43STAR 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 00000000cafe5e40 000040
[    0.000000] ACPI: APIC 00000000caffdf18 0000CC (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: HPET 00000000cafe6d18 000038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
[    0.000000] ACPI: SLIC 00000000caf9cc18 000176 (v01 SECCSD LH43STAR 06222004 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000cafe6c98 00003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000caf91018 000A5F (v01  PmRef  Cpu0Ist 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf90018 000996 (v01  PmRef    CpuPm 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf8c018 000D80 (v01  SgRef   SgTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf79018 0011E1 (v01 OptRef  OptTabl 00001000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
[    0.000000]   NODE_DATA [mem 0x22fdf4000-0x22fdf8fff]
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227400000-ffff88022e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x22fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xcad35fff]
[    0.000000]   node   0: [mem 0xcad8e000-0xcad9dfff]
[    0.000000]   node   0: [mem 0xcada0000-0xcada1fff]
[    0.000000]   node   0: [mem 0xcadb8000-0xcadbdfff]
[    0.000000]   node   0: [mem 0xcade8000-0xcaf31fff]
[    0.000000]   node   0: [mem 0xcafe8000-0xcaffcfff]
[    0.000000]   node   0: [mem 0x100000000-0x22fdfffff]
[    0.000000] On node 0 totalpages: 2074698
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 157 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11294 pages used for memmap
[    0.000000]   DMA32 zone: 826029 pages, LIFO batch:31
[    0.000000]   Normal zone: 17017 pages used for memmap
[    0.000000]   Normal zone: 1244672 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcad36000-0xcad8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcad9e000-0xcad9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcada2000-0xcadb7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcadbe000-0xcade7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaf32000-0xcafe7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaffd000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s86080 r8192 d24512 u131072
[    0.000000] pcpu-alloc: s86080 r8192 d24512 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2046174
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8086328K/8298792K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 212464K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS:33024 nr_irqs:808 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.134 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.26 BogoMIPS (lpj=8780536)
[    0.000037] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20131218
[    0.005583] ACPI: All ACPI Tables successfully acquired
[    0.010884] Security Framework initialized
[    0.010892] AppArmor: AppArmor disabled by boot time parameter
[    0.010893] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011398] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013165] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013922] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013932] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014130] Initializing cgroup subsys memory
[    0.014137] Initializing cgroup subsys devices
[    0.014138] Initializing cgroup subsys freezer
[    0.014139] Initializing cgroup subsys net_cls
[    0.014141] Initializing cgroup subsys blkio
[    0.014142] Initializing cgroup subsys perf_event
[    0.014166] CPU: Physical Processor ID: 0
[    0.014167] CPU: Processor Core ID: 0
[    0.014172] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014172] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014175] mce: CPU supports 9 MCE banks
[    0.014189] CPU0: Thermal monitoring enabled (TM1)
[    0.014198] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014198] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014198] tlb_flushall_shift: 6
[    0.014295] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000)
[    0.015856] Switched APIC routing to physical flat.
[    0.016274] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055917] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (fam: 06, model: 2a, stepping: 07)
[    0.055925] TSC deadline timer enabled
[    0.055934] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.055940] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.055942] ... version:                3
[    0.055943] ... bit width:              48
[    0.055944] ... generic registers:      4
[    0.055945] ... value mask:             0000ffffffffffff
[    0.055946] ... max period:             0000ffffffffffff
[    0.055947] ... fixed-purpose events:   3
[    0.055948] ... event mask:             000000070000000f
[    0.056543] x86: Booting SMP configuration:
[    0.056545] .... node  #0, CPUs:        #1
[    0.069805] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.069905]   #2  #3  #4  #5  #6  #7
[    0.149126] x86: Booted up 1 node, 8 CPUs
[    0.149130] smpboot: Total of 8 processors activated (35122.14 BogoMIPS)
[    0.156636] devtmpfs: initialized
[    0.159902] PM: Registering ACPI NVS region [mem 0xcaf32000-0xcafe7fff] (745472 bytes)
[    0.160081] pinctrl core: initialized pinctrl subsystem
[    0.160148] NET: Registered protocol family 16
[    0.160243] cpuidle: using governor ladder
[    0.160244] cpuidle: using governor menu
[    0.160273] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160274] ACPI: bus type PCI registered
[    0.160276] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.160380] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.160383] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.160468] PCI: Using configuration type 1 for base access
[    0.160822] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.160823] mtrr: probably your BIOS does not setup all CPUs.
[    0.160824] mtrr: corrected configuration.
[    0.161521] bio: create slab <bio-0> at 0
[    0.161665] ACPI: Added _OSI(Module Device)
[    0.161666] ACPI: Added _OSI(Processor Device)
[    0.161667] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161669] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164273] ACPI: Executed 1 blocks of module-level executable AML code
[    0.212396] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.220520] ACPI: SSDT 00000000cadd3718 000661 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.220860] ACPI: Dynamic OEM Table Load:
[    0.220862] ACPI: SSDT           (null) 000661 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.231656] ACPI: SSDT 00000000cadd4a98 000303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.232026] ACPI: Dynamic OEM Table Load:
[    0.232028] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.243506] ACPI: SSDT 00000000cadd2d98 000119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    0.243835] ACPI: Dynamic OEM Table Load:
[    0.243837] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    1.104272] ACPI: Interpreter enabled
[    1.104294] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    1.104299] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    1.104313] ACPI: (supports S0 S3 S4 S5)
[    1.104315] ACPI: Using IOAPIC for interrupt routing
[    1.104344] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.104525] ACPI: No dock devices found.
[    1.119908] ACPI: Power Resource [FN00] (off)
[    1.120008] ACPI: Power Resource [FN01] (off)
[    1.120597] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.120602] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.120638] \_SB_.PCI0:_OSC invalid UUID
[    1.120639] _OSC request data:1 1f 0 
[    1.120643] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.121286] PCI host bridge to bus 0000:00
[    1.121289] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.121291] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.121292] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.121294] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.121296] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.121298] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.121299] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.121301] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.121303] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.121304] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.121306] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[    1.121314] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    1.121410] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    1.121444] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.121528] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    1.121539] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
[    1.121546] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.121550] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    1.121664] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    1.121689] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
[    1.121768] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.121865] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    1.121888] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff]
[    1.121980] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.122072] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    1.122090] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
[    1.122167] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.122254] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    1.122339] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.122389] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.122435] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    1.122519] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.122568] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.122621] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    1.122644] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff]
[    1.122736] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.122824] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    1.123016] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    1.123037] pci 0000:00:1f.2: reg 0x10: [io  0xe0b0-0xe0b7]
[    1.123045] pci 0000:00:1f.2: reg 0x14: [io  0xe0a0-0xe0a3]
[    1.123054] pci 0000:00:1f.2: reg 0x18: [io  0xe090-0xe097]
[    1.123062] pci 0000:00:1f.2: reg 0x1c: [io  0xe080-0xe083]
[    1.123071] pci 0000:00:1f.2: reg 0x20: [io  0xe060-0xe07f]
[    1.123080] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff]
[    1.123127] pci 0000:00:1f.2: PME# supported from D3hot
[    1.123209] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    1.123226] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit]
[    1.123248] pci 0000:00:1f.3: reg 0x20: [io  0xe040-0xe05f]
[    1.123397] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030200
[    1.123406] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
[    1.123415] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.123424] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.123430] pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
[    1.123436] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
[    1.131008] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.131016] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.131023] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
[    1.131032] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.131361] pci 0000:02:00.0: [8086:0896] type 00 class 0x028000
[    1.131546] pci 0000:02:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
[    1.132324] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.139128] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.139145] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.139150] pci 0000:00:1c.0:   bridge window [mem 0xf7200000-0xf7bfffff]
[    1.139156] pci 0000:00:1c.0:   bridge window [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.139309] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.139378] pci 0000:03:00.0: reg 0x10: [io  0xb000-0xb0ff]
[    1.139498] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    1.139573] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    1.139976] pci 0000:03:00.0: supports D1 D2
[    1.139978] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.147052] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.147062] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    1.147071] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
[    1.147085] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.147348] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.147405] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.147457] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.147509] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    1.147562] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.147614] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.147666] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    1.147718] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    1.148228] ACPI: Enabled 6 GPEs in block 00 to 3F
[    1.148271] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.149124] ACPI : EC: 0 stale EC events cleared
[    1.149282] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.149285] vgaarb: loaded
[    1.149286] vgaarb: bridge control possible 0000:00:02.0
[    1.149324] PCI: Using ACPI for IRQ routing
[    1.150911] PCI: pci_cache_line_size set to 64 bytes
[    1.151008] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.151010] e820: reserve RAM buffer [mem 0xcad36000-0xcbffffff]
[    1.151013] e820: reserve RAM buffer [mem 0xcad9e000-0xcbffffff]
[    1.151015] e820: reserve RAM buffer [mem 0xcada2000-0xcbffffff]
[    1.151017] e820: reserve RAM buffer [mem 0xcadbe000-0xcbffffff]
[    1.151018] e820: reserve RAM buffer [mem 0xcaf32000-0xcbffffff]
[    1.151020] e820: reserve RAM buffer [mem 0xcaffd000-0xcbffffff]
[    1.151021] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[    1.151144] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.151149] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.153170] Switched to clocksource hpet
[    1.155089] pnp: PnP ACPI init
[    1.155102] ACPI: bus type PNP registered
[    1.155157] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.155227] system 00:01: [io  0x06a4] has been reserved
[    1.155230] system 00:01: [io  0x06a0] has been reserved
[    1.155232] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.155242] pnp 00:02: [dma 4]
[    1.155262] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.155288] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    1.155392] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.155424] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.155470] system 00:06: [io  0x0680-0x069f] has been reserved
[    1.155473] system 00:06: [io  0x1000-0x100f] has been reserved
[    1.155475] system 00:06: [io  0xffff] has been reserved
[    1.155477] system 00:06: [io  0xffff] has been reserved
[    1.155479] system 00:06: [io  0x0400-0x0453] could not be reserved
[    1.155481] system 00:06: [io  0x0458-0x047f] has been reserved
[    1.155483] system 00:06: [io  0x0500-0x057f] has been reserved
[    1.155485] system 00:06: [io  0x0a00-0x0a03] has been reserved
[    1.155487] system 00:06: [io  0x164e-0x164f] has been reserved
[    1.155489] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.155537] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.155581] system 00:08: [io  0x0454-0x0457] has been reserved
[    1.155583] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.155634] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.155687] pnp 00:0a: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    1.155904] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.155907] system 00:0b: [mem 0xfed10000-0xfed17fff] could not be reserved
[    1.155909] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.155911] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.155913] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.155915] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.155917] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.155919] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.155921] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[    1.155923] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.155925] system 00:0b: [mem 0xcfa00000-0xcfa00fff] has been reserved
[    1.155928] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.156482] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    1.156484] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[    1.156487] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.156498] pnp: PnP ACPI: found 13 devices
[    1.156499] ACPI: bus type PNP unregistered
[    1.163121] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.163124] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.163127] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
[    1.163130] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.163134] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.163137] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.163142] pci 0000:00:1c.0:   bridge window [mem 0xf7200000-0xf7bfffff]
[    1.163147] pci 0000:00:1c.0:   bridge window [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.163153] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.163156] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    1.163162] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
[    1.163166] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.163174] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.163175] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.163177] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.163179] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.163180] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.163182] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.163184] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.163185] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.163187] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.163189] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
[    1.163191] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.163192] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
[    1.163194] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.163196] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    1.163197] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf7bfffff]
[    1.163199] pci_bus 0000:02: resource 2 [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.163201] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    1.163202] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
[    1.163204] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.163293] NET: Registered protocol family 2
[    1.163528] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.163698] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.163832] TCP: Hash tables configured (established 65536 bind 65536)
[    1.163850] TCP: reno registered
[    1.163862] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.163895] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.164011] NET: Registered protocol family 1
[    1.164023] pci 0000:00:02.0: Boot video device
[    1.164382] PCI: CLS 64 bytes, default 64
[    1.164424] Unpacking initramfs...
[    1.474408] Freeing initrd memory: 15924K (ffff8800360d6000 - ffff880037063000)
[    1.474413] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.474416] software IO TLB [mem 0xc6d36000-0xcad36000] (64MB) mapped at [ffff8800c6d36000-ffff8800cad35fff]
[    1.474814] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.474867] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474875] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474884] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474893] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474902] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474912] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474919] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474926] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
[    1.474981] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.475417] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    1.475509] audit: initializing netlink subsys (disabled)
[    1.475526] audit: type=2000 audit(1408398065.460:1): initialized
[    1.489848] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.490103] VFS: Disk quotas dquot_6.5.2
[    1.490138] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.490204] msgmni has been set to 15824
[    1.490450] alg: No test for stdrng (krng)
[    1.490477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.490528] io scheduler noop registered
[    1.490530] io scheduler deadline registered
[    1.490555] io scheduler cfq registered (default)
[    1.490726] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.491009] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.491024] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.491060] intel_idle: MWAIT substates: 0x21120
[    1.491062] intel_idle: v0.4 model 0x2A
[    1.491063] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.491404] GHES: HEST is not enabled!
[    1.491457] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.491913] Linux agpgart interface v0.103
[    1.492031] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[    1.495205] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.495209] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.495332] mousedev: PS/2 mouse device common for all mice
[    1.495506] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.495535] rtc_cmos 00:07: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.495544] Intel P-state driver initializing.
[    1.495554] Intel pstate controlling: cpu 0
[    1.495572] Intel pstate controlling: cpu 1
[    1.495588] Intel pstate controlling: cpu 2
[    1.495602] Intel pstate controlling: cpu 3
[    1.495617] Intel pstate controlling: cpu 4
[    1.495636] Intel pstate controlling: cpu 5
[    1.495651] Intel pstate controlling: cpu 6
[    1.495672] Intel pstate controlling: cpu 7
[    1.495699] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.495700] AMD IOMMUv2 functionality not available on this system
[    1.495810] TCP: cubic registered
[    1.495939] NET: Registered protocol family 10
[    1.496257] mip6: Mobile IPv6
[    1.496259] NET: Registered protocol family 17
[    1.496262] mpls_gso: MPLS GSO support
[    1.496640] registered taskstats version 1
[    1.497180] rtc_cmos 00:07: setting system clock to 2014-08-18 21:41:06 UTC (1408398066)
[    1.497289] PM: Hibernation image not present or could not be loaded.
[    1.497926] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000)
[    1.497928] Write protecting the kernel read-only data: 8192k
[    1.502416] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
[    1.502463] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.503379] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
[    1.512933] systemd-udevd[88]: starting version 208
[    1.513224] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.524570] ACPI: Fan [FAN0] (off)
[    1.525048] ACPI: Invalid active2 threshold
[    1.525640] ACPI: bus type USB registered
[    1.525673] usbcore: registered new interface driver usbfs
[    1.525687] usbcore: registered new interface driver hub
[    1.525741] usbcore: registered new device driver usb
[    1.525849] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.525862] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.526128] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    1.526137] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.526367] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000000e000, e8:11:32:9d:94:26, XID 0c900800 IRQ 41
[    1.526370] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.526457] ehci-pci: EHCI PCI platform driver
[    1.526575] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.526586] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.526602] ehci-pci 0000:00:1a.0: debug port 2
[    1.526765] SCSI subsystem initialized
[    1.527678] libata version 3.00 loaded.
[    1.530505] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.530523] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c08000
[    1.531765] thermal LNXTHERM:00: registered as thermal_zone0
[    1.531767] ACPI: Thermal Zone [TZ00] (57 C)
[    1.540770] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.540813] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.540814] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.540816] usb usb1: Product: EHCI Host Controller
[    1.540817] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    1.540818] usb usb1: SerialNumber: 0000:00:1a.0
[    1.540926] hub 1-0:1.0: USB hub found
[    1.540931] hub 1-0:1.0: 2 ports detected
[    1.541116] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.541121] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.541133] ehci-pci 0000:00:1d.0: debug port 2
[    1.545042] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.545080] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000
[    1.546620] thermal LNXTHERM:01: registered as thermal_zone1
[    1.546621] ACPI: Thermal Zone [TZ01] (57 C)
[    1.546744] ACPI: Fan [FAN1] (off)
[    1.556998] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.557130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.557132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.557134] usb usb2: Product: EHCI Host Controller
[    1.557135] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    1.557136] usb usb2: SerialNumber: 0000:00:1d.0
[    1.557369] hub 2-0:1.0: USB hub found
[    1.557376] hub 2-0:1.0: 2 ports detected
[    1.557544] ahci 0000:00:1f.2: version 3.0
[    1.557705] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.557767] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.557770] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.565612] scsi0 : ahci
[    1.565973] scsi1 : ahci
[    1.566207] scsi2 : ahci
[    1.566456] scsi3 : ahci
[    1.566676] scsi4 : ahci
[    1.566781] scsi5 : ahci
[    1.566825] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 42
[    1.566827] ata2: DUMMY
[    1.566829] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 42
[    1.566830] ata4: DUMMY
[    1.566831] ata5: DUMMY
[    1.566832] ata6: DUMMY
[    1.852538] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.884508] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.884550] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.886700] ata3.00: ATAPI: TSSTcorp CDDVDW TS-L633J, SC01, max UDMA/100
[    1.892534] ata3.00: configured for UDMA/100
[    1.912265] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.912274] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.946744] ata1.00: configured for UDMA/133
[    1.947166] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  CXM0 PQ: 0 ANSI: 5
[    1.952720] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633J  SC01 PQ: 0 ANSI: 5
[    1.957458] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.957491] sd 0:0:0:0: [sda] Write Protect is off
[    1.957493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.957503] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.964024]  sda: sda1 sda2
[    1.964212] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.970176] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.970177] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.970263] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.970729] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.970774] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.984565] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.984569] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.984856] hub 1-1:1.0: USB hub found
[    1.984937] hub 1-1:1.0: 6 ports detected
[    2.096383] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.228487] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.228497] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.229009] hub 2-1:1.0: USB hub found
[    2.229228] hub 2-1:1.0: 6 ports detected
[    2.300183] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    2.393954] usb 1-1.2: New USB device found, idVendor=041e, idProduct=415a
[    2.393964] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=4
[    2.393968] usb 1-1.2: Product: Zen_Stone_Plus
[    2.393972] usb 1-1.2: Manufacturer: CREATIVE
[    2.393975] usb 1-1.2: SerialNumber: 31383444313439304230453032313033
[    2.397638] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    2.398132] scsi6 : usb-storage 1-1.2:1.0
[    2.398311] usbcore: registered new interface driver usb-storage
[    2.463985] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.471748] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.714462] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1008
[    2.714471] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.714476] usb 1-1.4: Product: WebCam SCB-1100N
[    2.714481] usb 1-1.4: Manufacturer: 123
[    2.955443] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    3.060346] usb 2-1.3: New USB device found, idVendor=8086, idProduct=0189
[    3.060354] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.135243] usb 2-1.5: new low-speed USB device number 4 using ehci-pci
[    3.233587] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c05f
[    3.233595] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.233599] usb 2-1.5: Product: USB Optical Mouse
[    3.233603] usb 2-1.5: Manufacturer: Logitech
[    3.236559] hidraw: raw HID events driver (C) Jiri Kosina
[    3.240796] usbcore: registered new interface driver usbhid
[    3.240801] usbhid: USB HID core driver
[    3.241961] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05F.0001/input/input2
[    3.242153] hid-generic 0003:046D:C05F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[    3.396520] scsi 6:0:0:0: Direct-Access     CREATIVE ZEN_Stone_Plus_S      PQ: 0 ANSI: 0 CCS
[    3.397057] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.398628] sd 6:0:0:0: [sdb] 3921920 512-byte logical blocks: (2.00 GB/1.87 GiB)
[    3.399612] sd 6:0:0:0: [sdb] Write Protect is off
[    3.399623] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[    3.400328] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.400412] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.403703] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.403774] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.404967]  sdb: sdb1
[    3.408397] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.408470] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.408537] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.462778] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.470922] Switched to clocksource tsc
[    3.887719] random: nonblocking pool is initialized
[    4.362207] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    4.614126] systemd[1]: Inserted module 'autofs4'
[    4.622498] systemd[1]: Set hostname to <matt-picci>.
[    7.422844] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.423552] systemd[1]: Starting Syslog Socket.
[    7.423650] systemd[1]: Listening on Syslog Socket.
[    7.423681] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.423816] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.423844] systemd[1]: Starting Remote File Systems (Pre).
[    7.423868] systemd[1]: Reached target Remote File Systems (Pre).
[    7.423890] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.423941] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.423961] systemd[1]: Starting Delayed Shutdown Socket.
[    7.424009] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.424087] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.424289] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.424323] systemd[1]: Starting Journal Socket.
[    7.424406] systemd[1]: Listening on Journal Socket.
[    7.424439] systemd[1]: Starting LSB: live-config - System Configuration Components...
[    7.425397] systemd[1]: Starting Syslog.
[    7.425426] systemd[1]: Reached target Syslog.
[    7.425662] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.426471] systemd[1]: Mounting Huge Pages File System...
[    7.444898] systemd[1]: Starting Apply Kernel Variables...
[    7.445721] systemd[1]: Starting Journal Service...
[    7.446607] systemd[1]: Started Journal Service.
[    7.739684] lp: driver loaded but no devices found
[    7.759182] ppdev: user-space parallel port driver
[    7.770218] systemd-udevd[220]: starting version 208
[    7.773536] fuse init (API version 7.22)
[    7.775973] loop: module loaded
[    9.076349] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[    9.304377] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    9.310455] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.311492] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
[    9.311499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.311503] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    9.311507] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    9.311510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.311512] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    9.311515] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    9.311519] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.311520] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[    9.311523] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[    9.311527] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.311529] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.313333] ACPI: Battery Slot [BAT1] (battery absent)
[    9.313704] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[    9.313846] ACPI: AC Adapter [ADP1] (on-line)
[    9.313960] wmi: Mapper loaded
[    9.314093] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[    9.314111] ACPI: Lid Switch [LID0]
[    9.314219] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[    9.314224] ACPI: Power Button [PWRB]
[    9.314327] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[    9.314330] ACPI: Sleep Button [SLPB]
[    9.314403] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    9.314407] ACPI: Power Button [PWRF]
[    9.323215] AVX version of gcm_enc/dec engaged.
[    9.325879] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    9.327961] [drm] Initialized drm 1.1.0 20060810
[    9.416421] ACPI Warning: SystemIO range 0x000000000000e040-0x000000000000e05f conflicts with OpRegion 0x000000000000e040-0x000000000000e04f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[    9.416427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.548390] samsung_laptop: detected SABI interface: SwSmi@
[    9.548393] samsung_laptop: Backlight controlled by ACPI video driver
[    9.568022] alg: No test for crc32 (crc32-pclmul)
[    9.580172] iTCO_vendor_support: vendor-support=0
[    9.582152] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    9.582228] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    9.582482] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.582617] [drm] Memory usable by graphics device = 2048M
[    9.585108] cfg80211: Calling CRDA to update world regulatory domain
[    9.597122] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    9.597125] Copyright(c) 2003- 2014 Intel Corporation
[    9.597263] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.597439] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[    9.603145] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[    9.603364] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    9.603611] MXM: GUID detected in BIOS
[    9.603707] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.603773] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.603931] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    9.603940] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.603941] [drm] Driver supports precise vblank timestamp query.
[    9.604094] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, 
[    9.604179] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.604217] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.604219] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[    9.604330] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 
[    9.604332] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    9.631985] [drm] Wrong MCH_SSKPD value: 0x16040307
[    9.631988] [drm] This can cause pipe underruns and display issues.
[    9.631989] [drm] Please upgrade your BIOS to fix this.
[    9.643493] Bluetooth: Core ver 2.18
[    9.643504] NET: Registered protocol family 31
[    9.643505] Bluetooth: HCI device and connection manager initialized
[    9.643511] Bluetooth: HCI socket layer initialized
[    9.643512] Bluetooth: L2CAP socket layer initialized
[    9.643519] Bluetooth: SCO socket layer initialized
[    9.647011] media: Linux media interface: v0.10
[    9.649064] fbcon: inteldrmfb (fb0) is primary device
[    9.650627] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    9.650629] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    9.650630] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    9.650632] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[    9.650760] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    9.662989] usbcore: registered new interface driver btusb
[    9.672141] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.676572] Linux video capture interface: v2.00
[    9.873781] uvcvideo: Found UVC 1.00 device WebCam SCB-1100N (2232:1008)
[    9.877248] cfg80211: World regulatory domain updated:
[    9.877251] cfg80211:  DFS Master region: unset
[    9.877251] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.877253] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    9.877254] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    9.877255] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    9.877256] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    9.877257] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    9.877259] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    9.893320] input: WebCam SCB-1100N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9
[    9.893526] usbcore: registered new interface driver uvcvideo
[    9.893527] USB Video Class driver (1.1.1)
[   10.170326] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   10.184710] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
[   10.257654] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input4
[   10.681528] Console: switching to colour frame buffer device 170x48
[   10.687980] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.687984] i915 0000:00:02.0: registered panic notifier
[   10.688419] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   10.709101] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   10.710479] acpi device:47: registered as cooling_device11
[   10.710587] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input10
[   10.711977] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.713295] acpi device:51: registered as cooling_device12
[   10.713410] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[   10.713576] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.713885] [drm] hdmi device  not found 1 0 1
[   10.713958] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0c1a00a1
[   10.713965] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[   10.713969] nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
[   10.714044] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   10.723773] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   10.723776] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   10.723839] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   10.723842] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   10.723844] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[   10.776614] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   10.776702] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.776768] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.818946] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   11.167065] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   11.167077] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[   11.167413] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   11.167421] nouveau  [   VBIOS][0000:01:00.0] version 70.08.58.00.03
[   11.167436] nouveau W[   VBIOS][0000:01:00.0] DCB version 0x44 unknown
[   11.167440] nouveau W[   VBIOS][0000:01:00.0] DCB version 0x44 unknown
[   11.167459] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[   11.167469] nouveau  [   VBIOS][0000:01:00.0] running init tables
[   11.167476] nouveau E[   VBIOS][0000:01:00.0] 0x8802[0]: unknown opcode 0x00
[   11.167571] nouveau E[ DEVINIT][0000:01:00.0] init failed, -22
[   11.167642] nouveau E[     DRM] failed to create 0x80000080, -22
[   11.168283] nouveau: probe of 0000:01:00.0 failed with error -22
[   11.206892] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
[   11.215967] systemd-journald[194]: Received request to flush runtime journal from PID 1
[   11.943900] RPC: Registered named UNIX socket transport module.
[   11.943909] RPC: Registered udp transport module.
[   11.943912] RPC: Registered tcp transport module.
[   11.943915] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.985826] FS-Cache: Loaded
[   12.029803] FS-Cache: Netfs 'nfs' registered for caching
[   12.100785] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   12.468263] vboxdrv: Found 8 processor cores.
[   12.468724] vboxdrv: fAsync=0 offMin=0x1a9 offMax=0x15ae
[   12.468811] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   12.468812] vboxdrv: Successfully loaded version 4.3.14_Debian (interface 0x001a0007).
[   12.485665] vboxpci: IOMMU not found (not registered)
[   12.619838] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.619841] Bluetooth: BNEP filters: protocol multicast
[   12.619848] Bluetooth: BNEP socket layer initialized
[   13.198656] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   13.317863] r8169 0000:03:00.0 eth0: link down
[   13.317909] r8169 0000:03:00.0 eth0: link down
[   13.317923] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.319530] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   13.326204] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   13.394897] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   13.401579] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   13.516588] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.867669] r8169 0000:03:00.0 eth0: link up
[   14.867688] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   49.776461] wlan0: authenticate with 00:02:cf:be:f4:e6
[   49.788626] wlan0: send auth to 00:02:cf:be:f4:e6 (try 1/3)
[   49.790987] wlan0: authenticated
[   49.791324] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   49.791338] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   49.791346] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   49.792274] wlan0: associate with 00:02:cf:be:f4:e6 (try 1/3)
[   49.794358] wlan0: RX AssocResp from 00:02:cf:be:f4:e6 (capab=0x411 status=0 aid=3)
[   49.798614] wlan0: associated
[   49.798676] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cad35fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cad36000-0x00000000cad8dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cad8e000-0x00000000cad9dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cad9e000-0x00000000cad9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cada0000-0x00000000cada1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cada2000-0x00000000cadb7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cadb8000-0x00000000cadbdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cadbe000-0x00000000cade7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cade8000-0x00000000caf31fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caf32000-0x00000000cafe7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cafe8000-0x00000000caffcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000caffd000-0x00000000caffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. RC530/RC730/RC530/RC730, BIOS 02WD.M007.20110810.PSA 08/10/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 base 0C8000000 mask FFC000000 write-back
[    0.000000]   4 base 0CB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FE0000000 write-back
[    0.000000]   7 base 220000000 mask FF0000000 write-back
[    0.000000]   8 base 22FE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcaffd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc90-0x000fcc9f] mapped at [ffff8800000fcc90]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
[    0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
[    0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
[    0.000000]  [mem 0x22fc00000-0x22fdfffff] page 2M
[    0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
[    0.000000]  [mem 0x22c000000-0x22fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[    0.000000]  [mem 0x200000000-0x22bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xcad35fff]
[    0.000000]  [mem 0x40200000-0xcabfffff] page 2M
[    0.000000]  [mem 0xcac00000-0xcad35fff] page 4k
[    0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE
[    0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcad8e000-0xcad9dfff]
[    0.000000]  [mem 0xcad8e000-0xcad9dfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcada0000-0xcada1fff]
[    0.000000]  [mem 0xcada0000-0xcada1fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcadb8000-0xcadbdfff]
[    0.000000]  [mem 0xcadb8000-0xcadbdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcade8000-0xcaf31fff]
[    0.000000]  [mem 0xcade8000-0xcaf31fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcafe8000-0xcaffcfff]
[    0.000000]  [mem 0xcafe8000-0xcaffcfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x360d6000-0x37062fff]
[    0.000000] ACPI: RSDP 00000000000f0430 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000caffee18 00006C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000caf9bd98 0000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xCAFE5E40/0x00000000CAFE5D40, using 32-bit address (20131218/tbfadt-271)
[    0.000000] ACPI: DSDT 00000000caf92018 0085A3 (v01 SECCSD LH43STAR 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 00000000cafe5e40 000040
[    0.000000] ACPI: APIC 00000000caffdf18 0000CC (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
[    0.000000] ACPI: HPET 00000000cafe6d18 000038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
[    0.000000] ACPI: SLIC 00000000caf9cc18 000176 (v01 SECCSD LH43STAR 06222004 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000cafe6c98 00003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000caf91018 000A5F (v01  PmRef  Cpu0Ist 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf90018 000996 (v01  PmRef    CpuPm 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf8c018 000D80 (v01  SgRef   SgTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000caf79018 0011E1 (v01 OptRef  OptTabl 00001000 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
[    0.000000]   NODE_DATA [mem 0x22fdf4000-0x22fdf8fff]
[    0.000000]  [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227400000-ffff88022e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x22fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xcad35fff]
[    0.000000]   node   0: [mem 0xcad8e000-0xcad9dfff]
[    0.000000]   node   0: [mem 0xcada0000-0xcada1fff]
[    0.000000]   node   0: [mem 0xcadb8000-0xcadbdfff]
[    0.000000]   node   0: [mem 0xcade8000-0xcaf31fff]
[    0.000000]   node   0: [mem 0xcafe8000-0xcaffcfff]
[    0.000000]   node   0: [mem 0x100000000-0x22fdfffff]
[    0.000000] On node 0 totalpages: 2074698
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 157 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11294 pages used for memmap
[    0.000000]   DMA32 zone: 826029 pages, LIFO batch:31
[    0.000000]   Normal zone: 17017 pages used for memmap
[    0.000000]   Normal zone: 1244672 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcad36000-0xcad8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcad9e000-0xcad9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcada2000-0xcadb7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcadbe000-0xcade7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaf32000-0xcafe7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcaffd000-0xcaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s86080 r8192 d24512 u131072
[    0.000000] pcpu-alloc: s86080 r8192 d24512 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2046174
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8086328K/8298792K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 212464K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS:33024 nr_irqs:808 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.048 MHz processor
[    0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.09 BogoMIPS (lpj=8780192)
[    0.000037] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20131218
[    0.005601] ACPI: All ACPI Tables successfully acquired
[    0.010863] Security Framework initialized
[    0.010871] AppArmor: AppArmor disabled by boot time parameter
[    0.010872] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011377] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013153] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013911] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013921] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014117] Initializing cgroup subsys memory
[    0.014124] Initializing cgroup subsys devices
[    0.014125] Initializing cgroup subsys freezer
[    0.014127] Initializing cgroup subsys net_cls
[    0.014128] Initializing cgroup subsys blkio
[    0.014129] Initializing cgroup subsys perf_event
[    0.014153] CPU: Physical Processor ID: 0
[    0.014154] CPU: Processor Core ID: 0
[    0.014159] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014159] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014161] mce: CPU supports 9 MCE banks
[    0.014175] CPU0: Thermal monitoring enabled (TM1)
[    0.014184] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014184] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014184] tlb_flushall_shift: 6
[    0.014281] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000)
[    0.015846] Switched APIC routing to physical flat.
[    0.016264] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055990] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (fam: 06, model: 2a, stepping: 07)
[    0.055997] TSC deadline timer enabled
[    0.056006] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.056012] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.056015] ... version:                3
[    0.056016] ... bit width:              48
[    0.056016] ... generic registers:      4
[    0.056018] ... value mask:             0000ffffffffffff
[    0.056019] ... max period:             0000ffffffffffff
[    0.056020] ... fixed-purpose events:   3
[    0.056021] ... event mask:             000000070000000f
[    0.056617] x86: Booting SMP configuration:
[    0.056619] .... node  #0, CPUs:        #1
[    0.069906] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070006]   #2  #3  #4  #5  #6  #7
[    0.149394] x86: Booted up 1 node, 8 CPUs
[    0.149398] smpboot: Total of 8 processors activated (35120.76 BogoMIPS)
[    0.156917] devtmpfs: initialized
[    0.160185] PM: Registering ACPI NVS region [mem 0xcaf32000-0xcafe7fff] (745472 bytes)
[    0.160368] pinctrl core: initialized pinctrl subsystem
[    0.160436] NET: Registered protocol family 16
[    0.160530] cpuidle: using governor ladder
[    0.160532] cpuidle: using governor menu
[    0.160561] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160563] ACPI: bus type PCI registered
[    0.160565] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.160668] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.160671] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.160757] PCI: Using configuration type 1 for base access
[    0.161109] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.161110] mtrr: probably your BIOS does not setup all CPUs.
[    0.161111] mtrr: corrected configuration.
[    0.161808] bio: create slab <bio-0> at 0
[    0.161952] ACPI: Added _OSI(Module Device)
[    0.161954] ACPI: Added _OSI(Processor Device)
[    0.161955] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161956] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164567] ACPI: Executed 1 blocks of module-level executable AML code
[    0.212794] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.220936] ACPI: SSDT 00000000cadd3718 000661 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.221277] ACPI: Dynamic OEM Table Load:
[    0.221279] ACPI: SSDT           (null) 000661 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.232097] ACPI: SSDT 00000000cadd4a98 000303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.232468] ACPI: Dynamic OEM Table Load:
[    0.232469] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.243964] ACPI: SSDT 00000000cadd2d98 000119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    0.244293] ACPI: Dynamic OEM Table Load:
[    0.244295] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    1.106576] ACPI: Interpreter enabled
[    1.106585] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    1.106590] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    1.106605] ACPI: (supports S0 S3 S4 S5)
[    1.106606] ACPI: Using IOAPIC for interrupt routing
[    1.106635] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.106818] ACPI: No dock devices found.
[    1.122388] ACPI: Power Resource [FN00] (off)
[    1.122487] ACPI: Power Resource [FN01] (off)
[    1.123078] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.123083] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.123120] \_SB_.PCI0:_OSC invalid UUID
[    1.123121] _OSC request data:1 1f 0 
[    1.123124] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.123768] PCI host bridge to bus 0000:00
[    1.123771] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.123773] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.123775] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.123777] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.123779] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.123780] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.123782] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.123784] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.123785] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.123787] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.123789] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[    1.123797] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    1.123892] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    1.123926] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.124010] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    1.124021] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
[    1.124028] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.124032] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    1.124146] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    1.124171] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
[    1.124250] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.124346] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    1.124369] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff]
[    1.124461] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.124553] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    1.124570] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
[    1.124648] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.124734] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    1.124818] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.124868] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.124914] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    1.124998] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.125047] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.125101] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    1.125123] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff]
[    1.125216] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.125308] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    1.125499] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    1.125520] pci 0000:00:1f.2: reg 0x10: [io  0xe0b0-0xe0b7]
[    1.125528] pci 0000:00:1f.2: reg 0x14: [io  0xe0a0-0xe0a3]
[    1.125536] pci 0000:00:1f.2: reg 0x18: [io  0xe090-0xe097]
[    1.125545] pci 0000:00:1f.2: reg 0x1c: [io  0xe080-0xe083]
[    1.125553] pci 0000:00:1f.2: reg 0x20: [io  0xe060-0xe07f]
[    1.125562] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff]
[    1.125609] pci 0000:00:1f.2: PME# supported from D3hot
[    1.125692] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    1.125709] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit]
[    1.125730] pci 0000:00:1f.3: reg 0x20: [io  0xe040-0xe05f]
[    1.125879] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030200
[    1.125888] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
[    1.125897] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.125906] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.125912] pci 0000:01:00.0: reg 0x24: [io  0xd000-0xd07f]
[    1.125919] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
[    1.133362] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.133369] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.133376] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
[    1.133385] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.133711] pci 0000:02:00.0: [8086:0896] type 00 class 0x028000
[    1.133898] pci 0000:02:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
[    1.134678] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.141498] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.141516] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.141520] pci 0000:00:1c.0:   bridge window [mem 0xf7200000-0xf7bfffff]
[    1.141527] pci 0000:00:1c.0:   bridge window [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.141684] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.141754] pci 0000:03:00.0: reg 0x10: [io  0xb000-0xb0ff]
[    1.141874] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    1.141949] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    1.142358] pci 0000:03:00.0: supports D1 D2
[    1.142360] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.149440] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.149449] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    1.149458] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
[    1.149472] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.149735] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.149793] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.149846] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.149899] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    1.149951] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.150004] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.150056] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    1.150108] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[    1.150620] ACPI: Enabled 6 GPEs in block 00 to 3F
[    1.150663] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.151595] ACPI : EC: 0 stale EC events cleared
[    1.151755] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.151757] vgaarb: loaded
[    1.151758] vgaarb: bridge control possible 0000:00:02.0
[    1.151797] PCI: Using ACPI for IRQ routing
[    1.153388] PCI: pci_cache_line_size set to 64 bytes
[    1.153483] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.153485] e820: reserve RAM buffer [mem 0xcad36000-0xcbffffff]
[    1.153487] e820: reserve RAM buffer [mem 0xcad9e000-0xcbffffff]
[    1.153489] e820: reserve RAM buffer [mem 0xcada2000-0xcbffffff]
[    1.153491] e820: reserve RAM buffer [mem 0xcadbe000-0xcbffffff]
[    1.153493] e820: reserve RAM buffer [mem 0xcaf32000-0xcbffffff]
[    1.153494] e820: reserve RAM buffer [mem 0xcaffd000-0xcbffffff]
[    1.153496] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[    1.153615] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.153620] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.155645] Switched to clocksource hpet
[    1.157566] pnp: PnP ACPI init
[    1.157580] ACPI: bus type PNP registered
[    1.157635] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.157706] system 00:01: [io  0x06a4] has been reserved
[    1.157709] system 00:01: [io  0x06a0] has been reserved
[    1.157711] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.157721] pnp 00:02: [dma 4]
[    1.157742] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.157768] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    1.157873] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.157904] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.157951] system 00:06: [io  0x0680-0x069f] has been reserved
[    1.157953] system 00:06: [io  0x1000-0x100f] has been reserved
[    1.157955] system 00:06: [io  0xffff] has been reserved
[    1.157957] system 00:06: [io  0xffff] has been reserved
[    1.157959] system 00:06: [io  0x0400-0x0453] could not be reserved
[    1.157961] system 00:06: [io  0x0458-0x047f] has been reserved
[    1.157963] system 00:06: [io  0x0500-0x057f] has been reserved
[    1.157965] system 00:06: [io  0x0a00-0x0a03] has been reserved
[    1.157967] system 00:06: [io  0x164e-0x164f] has been reserved
[    1.157970] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.158018] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.158062] system 00:08: [io  0x0454-0x0457] has been reserved
[    1.158065] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.158116] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.158170] pnp 00:0a: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    1.158386] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.158389] system 00:0b: [mem 0xfed10000-0xfed17fff] could not be reserved
[    1.158391] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.158393] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.158395] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.158397] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.158399] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.158401] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.158403] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[    1.158405] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.158407] system 00:0b: [mem 0xcfa00000-0xcfa00fff] has been reserved
[    1.158410] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.158968] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    1.158970] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[    1.158972] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.158983] pnp: PnP ACPI: found 13 devices
[    1.158985] ACPI: bus type PNP unregistered
[    1.165614] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.165617] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.165620] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf60fffff]
[    1.165623] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.165626] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.165629] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.165635] pci 0000:00:1c.0:   bridge window [mem 0xf7200000-0xf7bfffff]
[    1.165639] pci 0000:00:1c.0:   bridge window [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.165646] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.165649] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
[    1.165654] pci 0000:00:1c.3:   bridge window [mem 0xf6800000-0xf71fffff]
[    1.165659] pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.165666] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.165668] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.165670] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.165671] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.165673] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.165674] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.165676] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.165678] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.165679] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.165681] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
[    1.165683] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.165684] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
[    1.165686] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.165688] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    1.165690] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf7bfffff]
[    1.165691] pci_bus 0000:02: resource 2 [mem 0xf2c00000-0xf35fffff 64bit pref]
[    1.165693] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    1.165695] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
[    1.165696] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
[    1.165785] NET: Registered protocol family 2
[    1.166019] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.166188] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.166322] TCP: Hash tables configured (established 65536 bind 65536)
[    1.166340] TCP: reno registered
[    1.166353] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.166386] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.166503] NET: Registered protocol family 1
[    1.166516] pci 0000:00:02.0: Boot video device
[    1.166875] PCI: CLS 64 bytes, default 64
[    1.166917] Unpacking initramfs...
[    1.477760] Freeing initrd memory: 15924K (ffff8800360d6000 - ffff880037063000)
[    1.477765] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.477768] software IO TLB [mem 0xc6d36000-0xcad36000] (64MB) mapped at [ffff8800c6d36000-ffff8800cad35fff]
[    1.478166] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.478219] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478227] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478236] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478245] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478254] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478264] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478271] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478279] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
[    1.478333] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.478772] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    1.478865] audit: initializing netlink subsys (disabled)
[    1.478881] audit: type=2000 audit(1408396488.460:1): initialized
[    1.493168] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.493423] VFS: Disk quotas dquot_6.5.2
[    1.493459] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.493525] msgmni has been set to 15824
[    1.493770] alg: No test for stdrng (krng)
[    1.493798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.493849] io scheduler noop registered
[    1.493851] io scheduler deadline registered
[    1.493876] io scheduler cfq registered (default)
[    1.494047] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.494331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.494347] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.494383] intel_idle: MWAIT substates: 0x21120
[    1.494384] intel_idle: v0.4 model 0x2A
[    1.494385] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.494736] GHES: HEST is not enabled!
[    1.494789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.495243] Linux agpgart interface v0.103
[    1.495363] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
[    1.498746] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.498751] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.498874] mousedev: PS/2 mouse device common for all mice
[    1.499048] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.499077] rtc_cmos 00:07: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.499086] Intel P-state driver initializing.
[    1.499096] Intel pstate controlling: cpu 0
[    1.499114] Intel pstate controlling: cpu 1
[    1.499129] Intel pstate controlling: cpu 2
[    1.499144] Intel pstate controlling: cpu 3
[    1.499159] Intel pstate controlling: cpu 4
[    1.499179] Intel pstate controlling: cpu 5
[    1.499193] Intel pstate controlling: cpu 6
[    1.499208] Intel pstate controlling: cpu 7
[    1.499232] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.499233] AMD IOMMUv2 functionality not available on this system
[    1.499353] TCP: cubic registered
[    1.499490] NET: Registered protocol family 10
[    1.499765] mip6: Mobile IPv6
[    1.499768] NET: Registered protocol family 17
[    1.499771] mpls_gso: MPLS GSO support
[    1.500181] registered taskstats version 1
[    1.500718] rtc_cmos 00:07: setting system clock to 2014-08-18 21:14:48 UTC (1408396488)
[    1.500822] PM: Hibernation image not present or could not be loaded.
[    1.501438] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000)
[    1.501440] Write protecting the kernel read-only data: 8192k
[    1.505737] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
[    1.505784] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.506660] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
[    1.515708] systemd-udevd[88]: starting version 208
[    1.515979] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.526876] ACPI: Fan [FAN0] (off)
[    1.527415] ACPI: Invalid active2 threshold
[    1.528006] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.528018] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.528302] ACPI: bus type USB registered
[    1.528317] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[    1.528331] usbcore: registered new interface driver usbfs
[    1.528341] usbcore: registered new interface driver hub
[    1.528461] usbcore: registered new device driver usb
[    1.528555] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000000e000, e8:11:32:9d:94:26, XID 0c900800 IRQ 41
[    1.528558] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.528800] SCSI subsystem initialized
[    1.528895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.529059] ehci-pci: EHCI PCI platform driver
[    1.529177] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.529186] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.529198] ehci-pci 0000:00:1a.0: debug port 2
[    1.529729] libata version 3.00 loaded.
[    1.533104] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.533130] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c08000
[    1.533596] thermal LNXTHERM:00: registered as thermal_zone0
[    1.533598] ACPI: Thermal Zone [TZ00] (55 C)
[    1.544075] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.544109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.544111] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.544112] usb usb1: Product: EHCI Host Controller
[    1.544113] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    1.544115] usb usb1: SerialNumber: 0000:00:1a.0
[    1.544245] hub 1-0:1.0: USB hub found
[    1.544250] hub 1-0:1.0: 2 ports detected
[    1.544429] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.544434] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.544445] ehci-pci 0000:00:1d.0: debug port 2
[    1.548345] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.548367] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000
[    1.560106] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.560191] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.560197] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.560201] usb usb2: Product: EHCI Host Controller
[    1.560206] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    1.560210] usb usb2: SerialNumber: 0000:00:1d.0
[    1.560371] hub 2-0:1.0: USB hub found
[    1.560376] hub 2-0:1.0: 2 ports detected
[    1.560534] ahci 0000:00:1f.2: version 3.0
[    1.560667] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.563247] thermal LNXTHERM:01: registered as thermal_zone1
[    1.563249] ACPI: Thermal Zone [TZ01] (55 C)
[    1.563322] ACPI: Fan [FAN1] (off)
[    1.576121] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.576124] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.584645] scsi0 : ahci
[    1.584837] scsi1 : ahci
[    1.585052] scsi2 : ahci
[    1.585235] scsi3 : ahci
[    1.585392] scsi4 : ahci
[    1.585552] scsi5 : ahci
[    1.585599] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 42
[    1.585600] ata2: DUMMY
[    1.585603] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 42
[    1.585604] ata4: DUMMY
[    1.585604] ata5: DUMMY
[    1.585605] ata6: DUMMY
[    1.856438] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.904467] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.904488] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.906396] ata3.00: ATAPI: TSSTcorp CDDVDW TS-L633J, SC01, max UDMA/100
[    1.907072] ata3.00: configured for UDMA/100
[    1.932537] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.932539] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.973939] ata1.00: configured for UDMA/133
[    1.974118] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  CXM0 PQ: 0 ANSI: 5
[    1.976576] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633J  SC01 PQ: 0 ANSI: 5
[    1.981251] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.981282] sd 0:0:0:0: [sda] Write Protect is off
[    1.981284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.981294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.988167]  sda: sda1 sda2
[    1.988359] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.988893] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.988895] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.989042] hub 1-1:1.0: USB hub found
[    1.989140] hub 1-1:1.0: 6 ports detected
[    1.996336] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.996338] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.996455] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.996945] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.996990] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.100841] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.233430] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.233440] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.234083] hub 2-1:1.0: USB hub found
[    2.234172] hub 2-1:1.0: 6 ports detected
[    2.305201] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    2.398812] usb 1-1.2: New USB device found, idVendor=041e, idProduct=415a
[    2.398822] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=4
[    2.398827] usb 1-1.2: Product: Zen_Stone_Plus
[    2.398830] usb 1-1.2: Manufacturer: CREATIVE
[    2.398834] usb 1-1.2: SerialNumber: 31383444313439304230453032313033
[    2.402154] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    2.402684] scsi6 : usb-storage 1-1.2:1.0
[    2.402883] usbcore: registered new interface driver usb-storage
[    2.469164] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.477049] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    2.720291] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1008
[    2.720308] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.720313] usb 1-1.4: Product: WebCam SCB-1100N
[    2.720317] usb 1-1.4: Manufacturer: 123
[    2.961778] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    3.058290] usb 2-1.3: New USB device found, idVendor=8086, idProduct=0189
[    3.058298] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.130051] usb 2-1.5: new low-speed USB device number 4 using ehci-pci
[    3.228592] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c05f
[    3.228601] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.228606] usb 2-1.5: Product: USB Optical Mouse
[    3.228610] usb 2-1.5: Manufacturer: Logitech
[    3.231829] hidraw: raw HID events driver (C) Jiri Kosina
[    3.236458] usbcore: registered new interface driver usbhid
[    3.236464] usbhid: USB HID core driver
[    3.237733] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05F.0001/input/input2
[    3.237953] hid-generic 0003:046D:C05F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[    3.403564] scsi 6:0:0:0: Direct-Access     CREATIVE ZEN_Stone_Plus_S      PQ: 0 ANSI: 0 CCS
[    3.404409] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.405335] sd 6:0:0:0: [sdb] 3921920 512-byte logical blocks: (2.00 GB/1.87 GiB)
[    3.406081] sd 6:0:0:0: [sdb] Write Protect is off
[    3.406091] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
[    3.406846] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.406915] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.410227] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.410296] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.411365]  sdb: sdb1
[    3.414589] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.414658] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.414725] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.478413] Switched to clocksource tsc
[    3.911845] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.003763] random: nonblocking pool is initialized
[    4.880009] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    5.055384] systemd[1]: Inserted module 'autofs4'
[    5.173523] systemd[1]: Set hostname to <matt-picci>.
[    8.572881] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.573614] systemd[1]: Starting Syslog Socket.
[    8.573713] systemd[1]: Listening on Syslog Socket.
[    8.573745] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.573878] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.573905] systemd[1]: Starting Remote File Systems (Pre).
[    8.573930] systemd[1]: Reached target Remote File Systems (Pre).
[    8.573953] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.574004] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.574024] systemd[1]: Starting Delayed Shutdown Socket.
[    8.574069] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.574146] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.574356] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.574389] systemd[1]: Starting Journal Socket.
[    8.574476] systemd[1]: Listening on Journal Socket.
[    8.574508] systemd[1]: Starting LSB: live-config - System Configuration Components...
[    8.575518] systemd[1]: Starting Syslog.
[    8.575549] systemd[1]: Reached target Syslog.
[    8.575793] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.576547] systemd[1]: Mounting Huge Pages File System...
[    8.598922] systemd[1]: Starting Apply Kernel Variables...
[    8.599826] systemd[1]: Starting Journal Service...
[    8.600550] systemd[1]: Started Journal Service.
[    8.726548] lp: driver loaded but no devices found
[    8.728071] ppdev: user-space parallel port driver
[    8.756624] fuse init (API version 7.22)
[    8.767076] loop: module loaded
[    8.787782] systemd-udevd[226]: starting version 208
[   10.169764] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[   10.542097] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   10.548825] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.550207] AVX version of gcm_enc/dec engaged.
[   10.550570] ACPI Warning: SystemIO range 0x000000000000e040-0x000000000000e05f conflicts with OpRegion 0x000000000000e040-0x000000000000e04f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[   10.550575] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.550802] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
[   10.550808] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.550815] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[   10.550817] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[   10.550820] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.550824] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[   10.550826] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[   10.550829] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.550832] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
[   10.550835] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20131218/utaddress-258)
[   10.550837] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.550838] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.551159] ACPI: Battery Slot [BAT1] (battery absent)
[   10.552519] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   10.554245] [drm] Initialized drm 1.1.0 20060810
[   10.557572] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   10.557599] ACPI: Lid Switch [LID0]
[   10.557637] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   10.557640] ACPI: Power Button [PWRB]
[   10.557674] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[   10.557676] ACPI: Sleep Button [SLPB]
[   10.557709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   10.557711] ACPI: Power Button [PWRF]
[   10.558628] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[   10.558649] ACPI: AC Adapter [ADP1] (on-line)
[   10.558856] wmi: Mapper loaded
[   10.579233] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   10.579327] alg: No test for crc32 (crc32-pclmul)
[   10.580833] [drm] Memory usable by graphics device = 2048M
[   10.585606] cfg80211: Calling CRDA to update world regulatory domain
[   10.585823] samsung_laptop: detected SABI interface: SwSmi@
[   10.585825] samsung_laptop: Backlight controlled by ACPI video driver
[   10.615897] MXM: GUID detected in BIOS
[   10.615986] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   10.616147] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   10.616459] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, 
[   10.616509] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   10.616563] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   10.616750] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 
[   10.616753] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[   10.617759] iTCO_vendor_support: vendor-support=0
[   10.619095] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   10.619130] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   10.622195] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.622228] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   10.622231] Copyright(c) 2003- 2014 Intel Corporation
[   10.624990] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   10.625604] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X
[   10.625616] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   10.625716] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.625718] [drm] Driver supports precise vblank timestamp query.
[   10.625912] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.637339] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[   10.637475] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   10.638564] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.638660] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.638731] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.656972] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   10.656975] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   10.656976] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   10.656978] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[   10.657077] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   10.657797] [drm] Wrong MCH_SSKPD value: 0x16040307
[   10.657800] [drm] This can cause pipe underruns and display issues.
[   10.657801] [drm] Please upgrade your BIOS to fix this.
[   10.675451] fbcon: inteldrmfb (fb0) is primary device
[   10.676843] media: Linux media interface: v0.10
[   10.676857] Bluetooth: Core ver 2.18
[   10.676870] NET: Registered protocol family 31
[   10.676871] Bluetooth: HCI device and connection manager initialized
[   10.676877] Bluetooth: HCI socket layer initialized
[   10.676878] Bluetooth: L2CAP socket layer initialized
[   10.676888] Bluetooth: SCO socket layer initialized
[   10.679499] usbcore: registered new interface driver btusb
[   10.682229] Linux video capture interface: v2.00
[   10.683220] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   10.685051] cfg80211: World regulatory domain updated:
[   10.685052] cfg80211:  DFS Master region: unset
[   10.685052] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.685054] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   10.685055] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   10.685056] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   10.685056] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   10.685057] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   10.685058] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   10.694510] uvcvideo: Found UVC 1.00 device WebCam SCB-1100N (2232:1008)
[   10.713778] input: WebCam SCB-1100N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[   10.713844] usbcore: registered new interface driver uvcvideo
[   10.713845] USB Video Class driver (1.1.1)
[   11.088902] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: discard
[   11.471372] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[   11.486035] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
[   11.561553] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[   11.713487] Console: switching to colour frame buffer device 170x48
[   11.719027] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.719030] i915 0000:00:02.0: registered panic notifier
[   11.719468] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   11.724291] systemd-journald[196]: Received request to flush runtime journal from PID 1
[   11.752655] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   11.754343] acpi device:47: registered as cooling_device11
[   11.754477] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input13
[   11.756371] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.757978] acpi device:51: registered as cooling_device12
[   11.758133] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14
[   11.758334] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   11.760129] [drm] hdmi device  not found 1 0 1
[   11.760179] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0c1a00a1
[   11.760183] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[   11.760186] nouveau  [  DEVICE][0000:01:00.0] Family : NVC0
[   11.760232] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[   11.769975] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.769979] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[   11.770041] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[   11.770046] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[   11.843220] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   12.393482] RPC: Registered named UNIX socket transport module.
[   12.393490] RPC: Registered udp transport module.
[   12.393493] RPC: Registered tcp transport module.
[   12.393495] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.433535] FS-Cache: Loaded
[   12.474607] FS-Cache: Netfs 'nfs' registered for caching
[   12.589911] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   12.958139] vboxdrv: Found 8 processor cores.
[   12.958620] vboxdrv: fAsync=0 offMin=0x2f1 offMax=0x5ed7
[   12.958727] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   12.958729] vboxdrv: Successfully loaded version 4.3.14_Debian (interface 0x001a0007).
[   12.980487] vboxpci: IOMMU not found (not registered)
[   13.125939] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.125943] Bluetooth: BNEP filters: protocol multicast
[   13.125949] Bluetooth: BNEP socket layer initialized
[   13.401566] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[   13.518677] r8169 0000:03:00.0 eth0: link down
[   13.518720] r8169 0000:03:00.0 eth0: link down
[   13.518728] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.519935] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   13.526617] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   13.596475] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   13.603170] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   13.717930] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.076301] r8169 0000:03:00.0 eth0: link up
[   15.076321] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.132618] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   17.132630] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[   17.132952] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   17.132961] nouveau  [   VBIOS][0000:01:00.0] version 70.08.58.00.03
[   17.133965] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[   17.133977] nouveau  [   VBIOS][0000:01:00.0] running init tables
[   17.252084] nouveau 0000:01:00.0: irq 47 for MSI/MSI-X
[   17.252095] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   17.252129] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff880224507000] reclocking of this ram type unsupported
[   17.252131] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[   17.252133] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   17.252135] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   17.254115] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 850000uv
[   17.277524] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   17.277532] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   17.277536] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   17.277562] nouveau  [     CLK][0000:01:00.0] 07: core 202 MHz memory 324 MHz 
[   17.277565] nouveau  [     CLK][0000:01:00.0] 0f: core 672 MHz memory 900 MHz 
[   17.277704] nouveau  [     CLK][0000:01:00.0] --: core 202 MHz memory 324 MHz 
[   17.282252] vga_switcheroo: enabled
[   17.282532] [TTM] Zone  kernel: Available graphics memory: 4052390 kiB
[   17.282539] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   17.282542] [TTM] Initializing pool allocator
[   17.282555] [TTM] Initializing DMA pool allocator
[   17.282591] nouveau  [     DRM] VRAM: 1024 MiB
[   17.282593] nouveau  [     DRM] GART: 1048576 MiB
[   17.282597] nouveau  [     DRM] TMDS table version 2.0
[   17.282599] nouveau  [     DRM] DCB version 4.0
[   17.282601] nouveau  [     DRM] DCB outp 00: 02010300 00000000
[   17.282603] nouveau  [     DRM] DCB conn 00: 00000100
[   17.282605] nouveau  [     DRM] DCB conn 07: 00010746
[   17.282607] nouveau  [     DRM] DCB conn 08: 00020846
[   17.282609] nouveau  [     DRM] DCB conn 09: 00000900
[   17.283384] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   17.283386] [drm] Driver supports precise vblank timestamp query.
[   17.283389] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[   17.290671] nouveau  [     DRM] MM: using COPY0 for buffer copies
[   17.290687] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
[   24.883463] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   24.883795] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   24.883808] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   55.008040] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   55.008310] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   55.008319] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
[   55.750520] wlan0: authenticate with 00:02:cf:be:f4:e6
[   55.763471] wlan0: send auth to 00:02:cf:be:f4:e6 (try 1/3)
[   55.765191] wlan0: authenticated
[   55.765538] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   55.765547] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[   55.765552] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[   55.768791] wlan0: associate with 00:02:cf:be:f4:e6 (try 1/3)
[   55.770895] wlan0: RX AssocResp from 00:02:cf:be:f4:e6 (capab=0x411 status=0 aid=3)
[   55.775243] wlan0: associated
[   55.775308] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

From: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Subject: [PATCH] do not use drmGetBusid to grab the pci-id name

The kernel returns EACCES or EAGAIN on drm open when the drm device is
currently unavailable, such as if it is in use by another process
(e.g. plymouth), or hasn't finished initializing (e.g. on a really fast
SSD). Because the probing is done before a vt switch is completed,
we have no way to ensure that we can own DRM master. This results
in failing to boot.

Also attrib->unowned is not initialized, always initialize it to fix
a valgrind warning, and to prevent adding the same device a second time
after a vt switch.

Fixes: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/982889

Signed-off-by: Bryce Harrington <bryce@canonical.com>
---
 hw/xfree86/os-support/linux/lnx_platform.c |   29 +++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

--- a/config/udev.c
+++ b/config/udev.c
@@ -116,7 +116,7 @@
         if (xf86_find_platform_device_by_devnum(major(devnum), minor(devnum)))
             return;
 
-        LogMessage(X_INFO, "config/udev: Adding drm device (%s)\n", path);
+        LogMessage(X_INFO, "config/udev: Adding drm device (%s) %s %s\n", path, sysname, syspath);
 
         config_udev_odev_setup_attribs(path, syspath, major(devnum),
                                        minor(devnum), NewGPUDeviceRequest);
@@ -456,18 +456,55 @@
 
 #ifdef CONFIG_UDEV_KMS
 
+static Bool
+get_pci_busid(const char *in, char *pci_str)
+{
+    int ret, domain, bus, dev, func;
+    ret = sscanf(in, "/%04x:%02x:%02x.%d/drm/card%*d", &domain, &bus, &dev, &func);
+    if (ret != 4)
+        return FALSE;
+    sprintf(pci_str, "pci:%04x:%02x:%02x.%d", domain, bus, dev, func);
+    return TRUE;
+}
+
 static void
 config_udev_odev_setup_attribs(const char *path, const char *syspath,
                                int major, int minor,
                                config_odev_probe_proc_ptr probe_callback)
 {
     struct OdevAttributes *attribs = config_odev_allocate_attribute_list();
+    const char *platform;
 
     config_odev_add_attribute(attribs, ODEV_ATTRIB_PATH, path);
     config_odev_add_attribute(attribs, ODEV_ATTRIB_SYSPATH, syspath);
     config_odev_add_int_attribute(attribs, ODEV_ATTRIB_MAJOR, major);
     config_odev_add_int_attribute(attribs, ODEV_ATTRIB_MINOR, minor);
 
+    if (strstr(syspath, "/devices/pci")) {
+        char pci_str[17];
+        const char *end = strstr(syspath, "/drm/card");
+        if (strstr(syspath, "/usb"))
+            config_odev_add_attribute(attribs, ODEV_ATTRIB_BUSID, "");
+        else if (get_pci_busid(end - 13, pci_str))
+            config_odev_add_attribute(attribs, ODEV_ATTRIB_BUSID, pci_str);
+    } else if ((platform = strstr(syspath, "/devices/platform/"))) {
+        /* OMAP relies on this, modesetting doesn't use it */
+        const char *end;
+        platform += 18;
+        end = strchr(platform, '.');
+        if (end) {
+            char *busid;
+            int ret;
+
+            ret = asprintf(&busid, "platform:%.*s:%02li",
+                           (int)(end - platform), platform, strtol(end + 1, NULL, 10));
+            if (ret >= 0) {
+                config_odev_add_attribute(attribs, ODEV_ATTRIB_BUSID, busid);
+                free(busid);
+            }
+        }
+    }
+
     /* ownership of attribs is passed to probe layer */
     probe_callback(attribs);
 }
--- a/hw/xfree86/os-support/linux/lnx_platform.c
+++ b/hw/xfree86/os-support/linux/lnx_platform.c
@@ -23,11 +23,8 @@
 static Bool
 get_drm_info(struct OdevAttributes *attribs, char *path, int delayed_index)
 {
-    drmSetVersion sv;
     drmVersionPtr v;
-    char *buf;
     int major, minor, fd;
-    int err = 0;
     Bool paused, server_fd = FALSE;
 
     major = config_odev_get_int_attribute(attribs, ODEV_ATTRIB_MAJOR, 0);
@@ -51,18 +48,6 @@
     if (fd == -1)
         return FALSE;
 
-    sv.drm_di_major = 1;
-    sv.drm_di_minor = 4;
-    sv.drm_dd_major = -1;       /* Don't care */
-    sv.drm_dd_minor = -1;       /* Don't care */
-
-    err = drmSetInterfaceVersion(fd, &sv);
-    if (err) {
-        xf86Msg(X_ERROR, "%s: failed to set DRM interface version 1.4: %s\n",
-                path, strerror(-err));
-        goto out;
-    }
-
     /* for a delayed probe we've already added the device */
     if (delayed_index == -1) {
             xf86_add_platform_device(attribs, FALSE);
@@ -72,11 +57,6 @@
     if (server_fd)
         xf86_platform_devices[delayed_index].flags |= XF86_PDEV_SERVER_FD;
 
-    buf = drmGetBusid(fd);
-    xf86_add_platform_device_attrib(delayed_index,
-                                    ODEV_ATTRIB_BUSID, buf);
-    drmFreeBusid(buf);
-
     v = drmGetVersion(fd);
     if (!v) {
         xf86Msg(X_ERROR, "%s: failed to query DRM version\n", path);
@@ -90,7 +70,7 @@
 out:
     if (!server_fd)
         close(fd);
-    return (err == 0);
+    return TRUE;
 }
 
 Bool
@@ -170,8 +150,11 @@
             break;
     }
 
-    if (i != xf86_num_platform_devices)
+    if (i != xf86_num_platform_devices) {
+        LogMessage(X_INFO, "config/udev: Ignoring already known drm device (%s)\n",
+                   path);
         goto out_free;
+    }
 
     LogMessage(X_INFO, "xfree86: Adding drm device (%s)\n", path);

[    12.735] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    12.735] X Protocol Version 11, Revision 0
[    12.735] Build Operating System: Linux 3.14-1-amd64 x86_64 Debian
[    12.735] Current Operating System: Linux matt-picci 3.14-2-amd64 #1 SMP Debian 3.14.15-2 (2014-08-09) x86_64
[    12.735] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    12.735] Build Date: 17 July 2014  10:22:36PM
[    12.735] xorg-server 2:1.16.0-1 (http://www.debian.org/support) 
[    12.735] Current version of pixman: 0.32.6
[    12.735] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    12.735] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.736] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 18 22:10:58 2014
[    12.765] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.805] (==) No Layout section.  Using the first Screen section.
[    12.805] (==) No screen section available. Using defaults.
[    12.805] (**) |-->Screen "Default Screen Section" (0)
[    12.805] (**) |   |-->Monitor "<default monitor>"
[    12.806] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    12.806] (==) Automatically adding devices
[    12.806] (==) Automatically enabling devices
[    12.806] (==) Automatically adding GPU devices
[    12.840] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    12.840] 	Entry deleted from font path.
[    12.909] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    12.909] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.909] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.909] (II) Loader magic: 0x7f67a469ad80
[    12.909] (II) Module ABI versions:
[    12.909] 	X.Org ANSI C Emulation: 0.4
[    12.909] 	X.Org Video Driver: 18.0
[    12.909] 	X.Org XInput driver : 21.0
[    12.909] 	X.Org Server Extension : 8.0
[    12.910] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.781] (--) PCI:*(0:0:2:0) 8086:0116:144d:c0c1 rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000e000/64
[    15.781] (--) PCI: (0:1:0:0) 10de:0df4:144d:c0c1 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    15.786] (II) LoadModule: "glx"
[    15.793] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.141] (II) Module glx: vendor="X.Org Foundation"
[    16.141] 	compiled for 1.16.0, module version = 1.0.0
[    16.141] 	ABI class: X.Org Server Extension, version 8.0
[    16.141] (==) AIGLX enabled
[    16.141] (==) Matched nouveau as autoconfigured driver 0
[    16.141] (==) Matched nv as autoconfigured driver 1
[    16.141] (==) Matched intel as autoconfigured driver 2
[    16.141] (==) Matched modesetting as autoconfigured driver 3
[    16.141] (==) Matched fbdev as autoconfigured driver 4
[    16.141] (==) Matched vesa as autoconfigured driver 5
[    16.141] (==) Assigned the driver to the xf86ConfigLayout
[    16.141] (II) LoadModule: "nouveau"
[    16.141] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    16.182] (II) Module nouveau: vendor="X.Org Foundation"
[    16.182] 	compiled for 1.15.99.904, module version = 1.0.10
[    16.182] 	Module class: X.Org Video Driver
[    16.182] 	ABI class: X.Org Video Driver, version 18.0
[    16.182] (II) LoadModule: "nv"
[    16.200] (WW) Warning, couldn't open module nv
[    16.200] (II) UnloadModule: "nv"
[    16.200] (II) Unloading nv
[    16.200] (EE) Failed to load module "nv" (module does not exist, 0)
[    16.200] (II) LoadModule: "intel"
[    16.200] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.253] (II) Module intel: vendor="X.Org Foundation"
[    16.253] 	compiled for 1.15.99.904, module version = 2.21.15
[    16.253] 	Module class: X.Org Video Driver
[    16.253] 	ABI class: X.Org Video Driver, version 18.0
[    16.253] (II) LoadModule: "modesetting"
[    16.253] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    16.273] (II) Module modesetting: vendor="X.Org Foundation"
[    16.273] 	compiled for 1.15.99.904, module version = 0.9.0
[    16.273] 	Module class: X.Org Video Driver
[    16.273] 	ABI class: X.Org Video Driver, version 18.0
[    16.273] (II) LoadModule: "fbdev"
[    16.273] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.291] (II) Module fbdev: vendor="X.Org Foundation"
[    16.291] 	compiled for 1.15.99.904, module version = 0.4.4
[    16.291] 	Module class: X.Org Video Driver
[    16.291] 	ABI class: X.Org Video Driver, version 18.0
[    16.291] (II) LoadModule: "vesa"
[    16.292] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.309] (II) Module vesa: vendor="X.Org Foundation"
[    16.309] 	compiled for 1.15.99.904, module version = 2.3.3
[    16.309] 	Module class: X.Org Video Driver
[    16.309] 	ABI class: X.Org Video Driver, version 18.0
[    16.309] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    16.309] (II) NOUVEAU driver for NVIDIA chipset families :
[    16.309] 	RIVA TNT        (NV04)
[    16.309] 	RIVA TNT2       (NV05)
[    16.309] 	GeForce 256     (NV10)
[    16.309] 	GeForce 2       (NV11, NV15)
[    16.309] 	GeForce 4MX     (NV17, NV18)
[    16.309] 	GeForce 3       (NV20)
[    16.309] 	GeForce 4Ti     (NV25, NV28)
[    16.310] 	GeForce FX      (NV3x)
[    16.310] 	GeForce 6       (NV4x)
[    16.310] 	GeForce 7       (G7x)
[    16.310] 	GeForce 8       (G8x)
[    16.310] 	GeForce GTX 200 (NVA0)
[    16.310] 	GeForce GTX 400 (NVC0)
[    16.310] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    16.323] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.323] (II) FBDEV: driver for framebuffer: fbdev
[    16.323] (II) VESA: driver for VESA chipsets: vesa
[    16.323] (++) using VT number 7

[    16.331] (II) [drm] nouveau interface version: 1.1.1
[    16.337] (WW) Falling back to old probe method for modesetting
[    16.337] (WW) Falling back to old probe method for fbdev
[    16.337] (II) Loading sub module "fbdevhw"
[    16.337] (II) LoadModule: "fbdevhw"
[    16.338] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.355] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.355] 	compiled for 1.16.0, module version = 0.0.2
[    16.355] 	ABI class: X.Org Video Driver, version 18.0
[    16.355] (WW) Falling back to old probe method for vesa
[    16.356] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    16.356] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.356] (==) intel(0): RGB weight 888
[    16.356] (==) intel(0): Default visual is TrueColor
[    16.356] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    16.356] (**) intel(0): Relaxed fencing enabled
[    16.356] (**) intel(0): Wait on SwapBuffers? enabled
[    16.356] (**) intel(0): Triple buffering? enabled
[    16.356] (**) intel(0): Framebuffer tiled
[    16.356] (**) intel(0): Pixmaps tiled
[    16.356] (**) intel(0): 3D buffers tiled
[    16.356] (**) intel(0): SwapBuffers wait enabled
[    16.356] (==) intel(0): video overlay key set to 0x101fe
[    16.356] (II) intel(0): Output LVDS1 has no monitor section
[    16.357] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    16.358] (II) intel(0): Output VGA2 has no monitor section
[    16.358] (II) intel(0): Output HDMI1 has no monitor section
[    16.358] (II) intel(0): Output DP1 has no monitor section
[    16.359] (II) intel(0): EDID for output LVDS1
[    16.359] (II) intel(0): Manufacturer: SEC  Model: 3245  Serial#: 0
[    16.359] (II) intel(0): Year: 2011  Week: 0
[    16.359] (II) intel(0): EDID Version: 1.3
[    16.359] (II) intel(0): Digital Display Input
[    16.359] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    16.359] (II) intel(0): Gamma: 2.20
[    16.359] (II) intel(0): No DPMS capabilities specified
[    16.359] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.359] (II) intel(0): First detailed timing is preferred mode
[    16.359] (II) intel(0): redX: 0.615 redY: 0.335   greenX: 0.335 greenY: 0.610
[    16.359] (II) intel(0): blueX: 0.150 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
[    16.359] (II) intel(0): Manufacturer's mask: 0
[    16.359] (II) intel(0): Supported detailed timing:
[    16.359] (II) intel(0): clock: 70.4 MHz   Image Size:  344 x 194 mm
[    16.359] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[    16.359] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    16.359] (II) intel(0): Unknown vendor-specific block f
[    16.359] (II) intel(0):  SAMSUNG
[    16.359] (II) intel(0):  LTN156AT05000
[    16.359] (II) intel(0): EDID (in hex):
[    16.359] (II) intel(0): 	00ffffffffffff004ca3453200000000
[    16.359] (II) intel(0): 	00150103802213780abda59d55559c26
[    16.359] (II) intel(0): 	19505400000001010101010101010101
[    16.359] (II) intel(0): 	010101010101841b5678500016303020
[    16.359] (II) intel(0): 	250058c2100000190000000f00000000
[    16.359] (II) intel(0): 	00000000002387026401000000fe0053
[    16.359] (II) intel(0): 	414d53554e470a2020202020000000fe
[    16.359] (II) intel(0): 	004c544e313536415430353030300065
[    16.359] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    16.359] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.359] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.359] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    16.359] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    16.360] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    16.360] (II) intel(0): Printing probed modes for output LVDS1
[    16.360] (II) intel(0): Modeline "1366x768"x60.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    16.360] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    16.360] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    16.360] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    16.360] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    16.360] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    16.360] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    16.361] (II) intel(0): EDID for output VGA2
[    16.362] (II) intel(0): EDID for output HDMI1
[    16.362] (II) intel(0): EDID for output DP1
[    16.362] (II) intel(0): Output LVDS1 connected
[    16.362] (II) intel(0): Output VGA2 disconnected
[    16.362] (II) intel(0): Output HDMI1 disconnected
[    16.362] (II) intel(0): Output DP1 disconnected
[    16.362] (II) intel(0): Using exact sizes for initial modes
[    16.362] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    16.362] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.362] (II) intel(0): Kernel page flipping support detected, enabling
[    16.362] (==) intel(0): DPI set to (96, 96)
[    16.362] (II) Loading sub module "fb"
[    16.362] (II) LoadModule: "fb"
[    16.362] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.389] (II) Module fb: vendor="X.Org Foundation"
[    16.389] 	compiled for 1.16.0, module version = 1.0.0
[    16.389] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.389] (II) Loading sub module "dri2"
[    16.389] (II) LoadModule: "dri2"
[    16.389] (II) Module "dri2" already built-in
[    16.389] (II) Loading sub module "dri2"
[    16.389] (II) LoadModule: "dri2"
[    16.389] (II) Module "dri2" already built-in
[    16.389] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[    16.389] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    16.389] (==) NOUVEAU(G0): RGB weight 888
[    16.389] (==) NOUVEAU(G0): Default visual is TrueColor
[    16.389] (==) NOUVEAU(G0): Using HW cursor
[    16.389] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[    16.389] (==) NOUVEAU(G0): Page flipping enabled
[    16.389] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[    16.410] (II) NOUVEAU(G0): Output VGA-1-1 has no monitor section
[    16.420] (II) NOUVEAU(G0): EDID for output VGA-1-1
[    16.420] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-1
[    16.420] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.420] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.420] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.420] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    16.420] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    16.420] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.420] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    16.420] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    16.420] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    16.421] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    16.421] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    16.421] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    16.421] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    16.421] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    16.421] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    16.421] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    16.421] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    16.421] (==) NOUVEAU(G0): DPI set to (96, 96)
[    16.421] (II) Loading sub module "fb"
[    16.421] (II) LoadModule: "fb"
[    16.421] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.421] (II) Module fb: vendor="X.Org Foundation"
[    16.421] 	compiled for 1.16.0, module version = 1.0.0
[    16.421] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.421] (II) Loading sub module "exa"
[    16.421] (II) LoadModule: "exa"
[    16.421] (II) Loading /usr/lib/xorg/modules/libexa.so
[    16.455] (II) Module exa: vendor="X.Org Foundation"
[    16.455] 	compiled for 1.16.0, module version = 2.6.0
[    16.455] 	ABI class: X.Org Video Driver, version 18.0
[    16.455] (II) Loading sub module "shadowfb"
[    16.455] (II) LoadModule: "shadowfb"
[    16.456] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    16.471] (II) Module shadowfb: vendor="X.Org Foundation"
[    16.471] 	compiled for 1.16.0, module version = 1.0.0
[    16.471] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.471] (II) UnloadModule: "modesetting"
[    16.471] (II) Unloading modesetting
[    16.471] (II) UnloadModule: "fbdev"
[    16.472] (II) Unloading fbdev
[    16.472] (II) UnloadSubModule: "fbdevhw"
[    16.472] (II) Unloading fbdevhw
[    16.472] (II) UnloadModule: "vesa"
[    16.472] (II) Unloading vesa
[    16.472] (==) Depth 24 pixmap format is 32 bpp
[    16.475] (II) NOUVEAU(G0): Opened GPU channel 0
[    16.540] (II) NOUVEAU(G0): [DRI2] Setup complete
[    16.540] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    16.540] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    16.580] (II) EXA(256): Driver allocated offscreen pixmaps
[    16.580] (II) EXA(256): Driver registered support for the following operations:
[    16.580] (II)         Solid
[    16.580] (II)         Copy
[    16.580] (II)         Composite (RENDER acceleration)
[    16.580] (II)         UploadToScreen
[    16.580] (II)         DownloadFromScreen
[    16.580] (==) NOUVEAU(G0): Backing store enabled
[    16.580] (==) NOUVEAU(G0): Silken mouse enabled
[    16.598] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    16.598] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    16.598] (==) NOUVEAU(G0): DPMS enabled
[    16.598] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.623] (II) intel(0): [DRI2] Setup complete
[    16.623] (II) intel(0): [DRI2]   DRI driver: i965
[    16.623] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    16.625] (II) UXA(0): Driver registered support for the following operations:
[    16.625] (II)         solid
[    16.625] (II)         copy
[    16.625] (II)         composite (RENDER acceleration)
[    16.625] (II)         put_image
[    16.625] (II)         get_image
[    16.625] (==) intel(0): Backing store enabled
[    16.625] (==) intel(0): Silken mouse enabled
[    16.625] (II) intel(0): Initializing HW Cursor
[    16.625] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.627] (==) intel(0): DPMS enabled
[    16.627] (==) intel(0): Intel XvMC decoder enabled
[    16.627] (II) intel(0): Set up textured video
[    16.627] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    16.627] (II) intel(0): direct rendering: DRI2 Enabled
[    16.627] (==) intel(0): hotplug detection: "enabled"
[    16.660] (--) RandR disabled
[    16.692] (II) SELinux: Disabled on system
[    17.154] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    17.154] (II) AIGLX: enabled GLX_ARB_create_context
[    17.154] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    17.154] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    17.154] (II) AIGLX: enabled GLX_INTEL_swap_event
[    17.154] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    17.154] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    17.154] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    17.154] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    17.154] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    17.154] (II) AIGLX: Loaded and initialized i965
[    17.154] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.157] (II) NOUVEAU(G0): NVEnterVT is called.
[    17.157] (II) intel(0): Setting screen physical size to 361 x 203
[    17.862] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    17.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.863] (II) LoadModule: "evdev"
[    17.863] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.898] (II) Module evdev: vendor="X.Org Foundation"
[    17.898] 	compiled for 1.15.99.904, module version = 2.8.2
[    17.898] 	Module class: X.Org XInput Driver
[    17.898] 	ABI class: X.Org XInput driver, version 21.0
[    17.898] (II) Using input driver 'evdev' for 'Power Button'
[    17.898] (**) Power Button: always reports core events
[    17.898] (**) evdev: Power Button: Device: "/dev/input/event6"
[    17.898] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.898] (--) evdev: Power Button: Found keys
[    17.898] (II) evdev: Power Button: Configuring as keyboard
[    17.898] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    17.898] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.898] (**) Option "xkb_rules" "evdev"
[    17.898] (**) Option "xkb_model" "pc105"
[    17.898] (**) Option "xkb_layout" "it"
[    17.986] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    17.986] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.986] (II) Using input driver 'evdev' for 'Video Bus'
[    17.986] (**) Video Bus: always reports core events
[    17.986] (**) evdev: Video Bus: Device: "/dev/input/event13"
[    17.986] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    17.986] (--) evdev: Video Bus: Found keys
[    17.986] (II) evdev: Video Bus: Configuring as keyboard
[    17.986] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[    17.986] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    17.986] (**) Option "xkb_rules" "evdev"
[    17.986] (**) Option "xkb_model" "pc105"
[    17.986] (**) Option "xkb_layout" "it"
[    17.987] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    17.987] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.987] (II) Using input driver 'evdev' for 'Video Bus'
[    17.987] (**) Video Bus: always reports core events
[    17.987] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    17.987] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    17.987] (--) evdev: Video Bus: Found keys
[    17.987] (II) evdev: Video Bus: Configuring as keyboard
[    17.987] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input13/event12"
[    17.987] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    17.987] (**) Option "xkb_rules" "evdev"
[    17.987] (**) Option "xkb_model" "pc105"
[    17.987] (**) Option "xkb_layout" "it"
[    17.988] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    17.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.988] (II) Using input driver 'evdev' for 'Power Button'
[    17.988] (**) Power Button: always reports core events
[    17.988] (**) evdev: Power Button: Device: "/dev/input/event4"
[    17.988] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.988] (--) evdev: Power Button: Found keys
[    17.988] (II) evdev: Power Button: Configuring as keyboard
[    17.988] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event4"
[    17.988] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    17.988] (**) Option "xkb_rules" "evdev"
[    17.988] (**) Option "xkb_model" "pc105"
[    17.988] (**) Option "xkb_layout" "it"
[    17.989] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    17.989] (II) No input driver specified, ignoring this device.
[    17.989] (II) This device may have been added with another device file.
[    17.989] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    17.989] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    17.989] (II) Using input driver 'evdev' for 'Sleep Button'
[    17.989] (**) Sleep Button: always reports core events
[    17.989] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[    17.990] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    17.990] (--) evdev: Sleep Button: Found keys
[    17.990] (II) evdev: Sleep Button: Configuring as keyboard
[    17.990] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event5"
[    17.990] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    17.990] (**) Option "xkb_rules" "evdev"
[    17.990] (**) Option "xkb_model" "pc105"
[    17.990] (**) Option "xkb_layout" "it"
[    17.990] (II) config/udev: Adding drm device (/dev/dri/card1)
[    17.990] (II) xfree86: Adding drm device (/dev/dri/card1)
[    17.990] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[    17.991] (II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event7)
[    17.991] (**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall"
[    17.991] (II) Using input driver 'evdev' for 'WebCam SCB-1100N'
[    17.991] (**) WebCam SCB-1100N: always reports core events
[    17.991] (**) evdev: WebCam SCB-1100N: Device: "/dev/input/event7"
[    17.991] (--) evdev: WebCam SCB-1100N: Vendor 0x2232 Product 0x1008
[    17.991] (--) evdev: WebCam SCB-1100N: Found keys
[    17.991] (II) evdev: WebCam SCB-1100N: Configuring as keyboard
[    17.991] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9/event7"
[    17.991] (II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD, id 11)
[    17.991] (**) Option "xkb_rules" "evdev"
[    17.991] (**) Option "xkb_model" "pc105"
[    17.991] (**) Option "xkb_layout" "it"
[    17.992] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    17.992] (II) No input driver specified, ignoring this device.
[    17.992] (II) This device may have been added with another device file.
[    17.993] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[    17.993] (II) No input driver specified, ignoring this device.
[    17.993] (II) This device may have been added with another device file.
[    17.993] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[    17.993] (II) No input driver specified, ignoring this device.
[    17.993] (II) This device may have been added with another device file.
[    17.994] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    17.994] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    17.994] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    17.994] (**) Logitech USB Optical Mouse: always reports core events
[    17.994] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[    17.994] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05f
[    17.994] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    17.994] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    17.994] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    17.994] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    17.994] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    17.994] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    17.994] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    17.994] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.994] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05F.0001/input/input2/event1"
[    17.994] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 12)
[    17.994] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    17.994] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    17.994] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    17.994] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    17.994] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    17.995] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    17.995] (II) No input driver specified, ignoring this device.
[    17.995] (II) This device may have been added with another device file.
[    17.995] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    17.995] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    17.995] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    17.996] (**) AT Translated Set 2 keyboard: always reports core events
[    17.996] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    17.996] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    17.996] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    17.996] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    17.996] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    17.996] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    17.996] (**) Option "xkb_rules" "evdev"
[    17.996] (**) Option "xkb_model" "pc105"
[    17.996] (**) Option "xkb_layout" "it"
[    17.996] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event11)
[    17.997] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    17.997] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    17.997] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    17.997] (II) LoadModule: "synaptics"
[    17.997] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.080] (II) Module synaptics: vendor="X.Org Foundation"
[    18.080] 	compiled for 1.15.99.904, module version = 1.8.0
[    18.080] 	Module class: X.Org XInput Driver
[    18.080] 	ABI class: X.Org XInput driver, version 21.0
[    18.080] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    18.080] (**) ETPS/2 Elantech Touchpad: always reports core events
[    18.080] (**) Option "Device" "/dev/input/event11"
[    18.284] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2508 (res 0)
[    18.284] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1320 (res 0)
[    18.284] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    18.284] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    18.284] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    18.284] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    18.284] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    18.284] (**) ETPS/2 Elantech Touchpad: always reports core events
[    18.380] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event11"
[    18.380] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    18.380] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    18.380] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    18.380] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.071
[    18.381] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    18.381] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    18.381] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    18.381] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    18.381] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    18.381] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    18.381] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    18.382] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    18.382] (II) No input driver specified, ignoring this device.
[    18.382] (II) This device may have been added with another device file.
[    18.389] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[    18.389] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[    18.389] (II) NOUVEAU(G0): NVLeaveVT is called.
[    18.390] (II) NOUVEAU(G0): Closed GPU channel 0
[    18.390] (II) UnloadModule: "nouveau"
[    18.390] (II) UnloadSubModule: "shadowfb"
[    18.390] (II) Unloading shadowfb
[    18.391] (II) UnloadSubModule: "exa"
[    18.391] (II) Unloading exa
[    18.391] (II) UnloadSubModule: "fb"
[    18.391] (II) Unloading fb
[    18.391] (II) config/udev: Adding drm device (/dev/dri/card0)
[    18.391] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.391] (II) LoadModule: "modesetting"
[    18.391] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.391] (II) Module modesetting: vendor="X.Org Foundation"
[    18.391] 	compiled for 1.15.99.904, module version = 0.9.0
[    18.391] 	Module class: X.Org Video Driver
[    18.391] 	ABI class: X.Org Video Driver, version 18.0
[    18.392] (II) modesetting(G0): using drv /dev/dri/card0
[    18.401] (II) modesetting(G0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.401] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[    18.401] (==) modesetting(G0): RGB weight 888
[    18.401] (==) modesetting(G0): Default visual is TrueColor
[    18.401] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[    18.412] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[    18.423] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    18.423] (==) modesetting(G0): DPI set to (96, 96)
[    18.423] (II) Loading sub module "fb"
[    18.423] (II) LoadModule: "fb"
[    18.423] (II) Loading /usr/lib/xorg/modules/libfb.so
[    18.423] (II) Module fb: vendor="X.Org Foundation"
[    18.423] 	compiled for 1.16.0, module version = 1.0.0
[    18.423] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    18.423] (II) Loading sub module "shadow"
[    18.423] (II) LoadModule: "shadow"
[    18.423] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    18.457] (II) Module shadow: vendor="X.Org Foundation"
[    18.457] 	compiled for 1.16.0, module version = 1.1.0
[    18.457] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    18.467] (==) modesetting(G0): Backing store enabled
[    18.467] (==) modesetting(G0): Silken mouse enabled
[    18.467] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.468] (==) modesetting(G0): DPMS enabled
[    18.468] (II) modesetting(G0): Damage tracking initialized
[    18.468] xf86: found device 1
[    18.468] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-VGA-1 (null)
[    18.469] (II) config/udev: removing device Video Bus
[    18.524] (II) evdev: Video Bus: Close
[    18.524] (II) UnloadModule: "evdev"
[    18.524] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    18.524] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.524] (II) Using input driver 'evdev' for 'Video Bus'
[    18.525] (**) Video Bus: always reports core events
[    18.525] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    18.525] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.525] (--) evdev: Video Bus: Found keys
[    18.525] (II) evdev: Video Bus: Configuring as keyboard
[    18.525] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input13/event12"
[    18.525] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    18.525] (**) Option "xkb_rules" "evdev"
[    18.525] (**) Option "xkb_model" "pc105"
[    18.525] (**) Option "xkb_layout" "it"
[    18.526] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card1 /dev/dri/card1
[    18.526] (II) config/udev: Adding drm device (/dev/dri/card1)
[    18.526] (II) xfree86: Adding drm device (/dev/dri/card1)
[    18.526] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[    18.526] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-LVDS-1 (null)
[    18.526] (II) config/udev: removing device Video Bus
[    18.556] (II) evdev: Video Bus: Close
[    18.556] (II) UnloadModule: "evdev"
[    18.556] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    18.556] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.556] (II) Using input driver 'evdev' for 'Video Bus'
[    18.556] (**) Video Bus: always reports core events
[    18.556] (**) evdev: Video Bus: Device: "/dev/input/event13"
[    18.556] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.556] (--) evdev: Video Bus: Found keys
[    18.556] (II) evdev: Video Bus: Configuring as keyboard
[    18.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[    18.556] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.556] (**) Option "xkb_rules" "evdev"
[    18.556] (**) Option "xkb_model" "pc105"
[    18.556] (**) Option "xkb_layout" "it"
[    18.557] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-VGA-2 (null)
[    18.557] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-HDMI-A-1 (null)
[    18.557] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-DP-1 (null)
[    44.244] (II) intel(0): EDID vendor "SEC", prod id 12869
[    44.244] (II) intel(0): Printing DDC gathered Modelines:
[    44.244] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    48.876] (II) intel(0): EDID vendor "SEC", prod id 12869
[    48.876] (II) intel(0): Printing DDC gathered Modelines:
[    48.876] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    50.311] (II) intel(0): EDID vendor "SEC", prod id 12869
[    50.311] (II) intel(0): Printing DDC gathered Modelines:
[    50.311] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   136.491] (II) intel(0): EDID vendor "SEC", prod id 12869
[   136.491] (II) intel(0): Printing DDC gathered Modelines:
[   136.492] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[   136.494] (II) intel(0): EDID vendor "SEC", prod id 12869
[   136.494] (II) intel(0): Printing DDC gathered Modelines:
[   136.494] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)

[    13.618] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    13.618] X Protocol Version 11, Revision 0
[    13.618] Build Operating System: Linux 3.14-2-amd64 x86_64 Debian
[    13.618] Current Operating System: Linux matt-picci 3.14-2-amd64 #1 SMP Debian 3.14.15-2 (2014-08-09) x86_64
[    13.618] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    13.618] Build Date: 18 August 2014  11:26:27PM
[    13.618] xorg-server 2:1.16.0-1 (http://www.debian.org/support) 
[    13.618] Current version of pixman: 0.32.6
[    13.618] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.618] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.619] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 18 23:41:18 2014
[    13.641] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    13.688] (==) No Layout section.  Using the first Screen section.
[    13.688] (==) No screen section available. Using defaults.
[    13.688] (**) |-->Screen "Default Screen Section" (0)
[    13.688] (**) |   |-->Monitor "<default monitor>"
[    13.689] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    13.689] (==) Automatically adding devices
[    13.689] (==) Automatically enabling devices
[    13.689] (==) Automatically adding GPU devices
[    13.723] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    13.723] 	Entry deleted from font path.
[    13.792] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    13.792] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.792] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.792] (II) Loader magic: 0x7ff486971d80
[    13.792] (II) Module ABI versions:
[    13.792] 	X.Org ANSI C Emulation: 0.4
[    13.792] 	X.Org Video Driver: 18.0
[    13.792] 	X.Org XInput driver : 21.0
[    13.792] 	X.Org Server Extension : 8.0
[    13.793] (II) xfree86: Adding drm device (/dev/dri/card0)
[    13.795] (--) PCI:*(0:0:2:0) 8086:0116:144d:c0c1 rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000e000/64
[    13.795] (--) PCI: (0:1:0:0) 10de:0df4:144d:c0c1 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    13.799] (II) LoadModule: "glx"
[    13.828] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.041] (II) Module glx: vendor="X.Org Foundation"
[    14.041] 	compiled for 1.16.0, module version = 1.0.0
[    14.041] 	ABI class: X.Org Server Extension, version 8.0
[    14.041] (==) AIGLX enabled
[    14.041] (==) Matched intel as autoconfigured driver 0
[    14.041] (==) Matched intel as autoconfigured driver 1
[    14.041] (==) Matched modesetting as autoconfigured driver 2
[    14.041] (==) Matched fbdev as autoconfigured driver 3
[    14.041] (==) Matched vesa as autoconfigured driver 4
[    14.041] (==) Assigned the driver to the xf86ConfigLayout
[    14.041] (II) LoadModule: "intel"
[    14.041] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    14.095] (II) Module intel: vendor="X.Org Foundation"
[    14.095] 	compiled for 1.15.99.904, module version = 2.21.15
[    14.095] 	Module class: X.Org Video Driver
[    14.095] 	ABI class: X.Org Video Driver, version 18.0
[    14.095] (II) LoadModule: "modesetting"
[    14.095] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    14.112] (II) Module modesetting: vendor="X.Org Foundation"
[    14.112] 	compiled for 1.15.99.904, module version = 0.9.0
[    14.112] 	Module class: X.Org Video Driver
[    14.112] 	ABI class: X.Org Video Driver, version 18.0
[    14.112] (II) LoadModule: "fbdev"
[    14.113] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    14.129] (II) Module fbdev: vendor="X.Org Foundation"
[    14.129] 	compiled for 1.15.99.904, module version = 0.4.4
[    14.129] 	Module class: X.Org Video Driver
[    14.129] 	ABI class: X.Org Video Driver, version 18.0
[    14.129] (II) LoadModule: "vesa"
[    14.130] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    14.147] (II) Module vesa: vendor="X.Org Foundation"
[    14.147] 	compiled for 1.15.99.904, module version = 2.3.3
[    14.147] 	Module class: X.Org Video Driver
[    14.147] 	ABI class: X.Org Video Driver, version 18.0
[    14.147] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    14.153] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    14.153] (II) FBDEV: driver for framebuffer: fbdev
[    14.153] (II) VESA: driver for VESA chipsets: vesa
[    14.153] (++) using VT number 7

[    14.174] (WW) Falling back to old probe method for modesetting
[    14.174] (WW) Falling back to old probe method for fbdev
[    14.174] (II) Loading sub module "fbdevhw"
[    14.174] (II) LoadModule: "fbdevhw"
[    14.175] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    14.192] (II) Module fbdevhw: vendor="X.Org Foundation"
[    14.192] 	compiled for 1.16.0, module version = 0.0.2
[    14.192] 	ABI class: X.Org Video Driver, version 18.0
[    14.192] (WW) Falling back to old probe method for vesa
[    14.192] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    14.192] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    14.192] (==) intel(0): RGB weight 888
[    14.192] (==) intel(0): Default visual is TrueColor
[    14.192] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    14.193] (**) intel(0): Relaxed fencing enabled
[    14.193] (**) intel(0): Wait on SwapBuffers? enabled
[    14.193] (**) intel(0): Triple buffering? enabled
[    14.193] (**) intel(0): Framebuffer tiled
[    14.193] (**) intel(0): Pixmaps tiled
[    14.193] (**) intel(0): 3D buffers tiled
[    14.193] (**) intel(0): SwapBuffers wait enabled
[    14.193] (==) intel(0): video overlay key set to 0x101fe
[    14.193] (II) intel(0): Output LVDS1 has no monitor section
[    14.193] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    14.194] (II) intel(0): Output VGA1 has no monitor section
[    14.195] (II) intel(0): Output HDMI1 has no monitor section
[    14.195] (II) intel(0): Output DP1 has no monitor section
[    14.195] (II) intel(0): EDID for output LVDS1
[    14.195] (II) intel(0): Manufacturer: SEC  Model: 3245  Serial#: 0
[    14.195] (II) intel(0): Year: 2011  Week: 0
[    14.195] (II) intel(0): EDID Version: 1.3
[    14.195] (II) intel(0): Digital Display Input
[    14.195] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    14.195] (II) intel(0): Gamma: 2.20
[    14.195] (II) intel(0): No DPMS capabilities specified
[    14.195] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    14.195] (II) intel(0): First detailed timing is preferred mode
[    14.195] (II) intel(0): redX: 0.615 redY: 0.335   greenX: 0.335 greenY: 0.610
[    14.195] (II) intel(0): blueX: 0.150 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
[    14.195] (II) intel(0): Manufacturer's mask: 0
[    14.195] (II) intel(0): Supported detailed timing:
[    14.195] (II) intel(0): clock: 70.4 MHz   Image Size:  344 x 194 mm
[    14.195] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[    14.196] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    14.196] (II) intel(0): Unknown vendor-specific block f
[    14.196] (II) intel(0):  SAMSUNG
[    14.196] (II) intel(0):  LTN156AT05000
[    14.196] (II) intel(0): EDID (in hex):
[    14.196] (II) intel(0): 	00ffffffffffff004ca3453200000000
[    14.196] (II) intel(0): 	00150103802213780abda59d55559c26
[    14.196] (II) intel(0): 	19505400000001010101010101010101
[    14.196] (II) intel(0): 	010101010101841b5678500016303020
[    14.196] (II) intel(0): 	250058c2100000190000000f00000000
[    14.196] (II) intel(0): 	00000000002387026401000000fe0053
[    14.196] (II) intel(0): 	414d53554e470a2020202020000000fe
[    14.196] (II) intel(0): 	004c544e313536415430353030300065
[    14.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    14.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    14.196] (II) intel(0): Printing probed modes for output LVDS1
[    14.197] (II) intel(0): Modeline "1366x768"x60.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    14.197] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    14.197] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    14.197] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    14.197] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    14.197] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    14.197] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    14.198] (II) intel(0): EDID for output VGA1
[    14.198] (II) intel(0): EDID for output HDMI1
[    14.198] (II) intel(0): EDID for output DP1
[    14.198] (II) intel(0): Output LVDS1 connected
[    14.198] (II) intel(0): Output VGA1 disconnected
[    14.198] (II) intel(0): Output HDMI1 disconnected
[    14.198] (II) intel(0): Output DP1 disconnected
[    14.199] (II) intel(0): Using exact sizes for initial modes
[    14.199] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    14.199] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    14.199] (II) intel(0): Kernel page flipping support detected, enabling
[    14.199] (==) intel(0): DPI set to (96, 96)
[    14.199] (II) Loading sub module "fb"
[    14.199] (II) LoadModule: "fb"
[    14.199] (II) Loading /usr/lib/xorg/modules/libfb.so
[    14.219] (II) Module fb: vendor="X.Org Foundation"
[    14.219] 	compiled for 1.16.0, module version = 1.0.0
[    14.219] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    14.219] (II) Loading sub module "dri2"
[    14.219] (II) LoadModule: "dri2"
[    14.219] (II) Module "dri2" already built-in
[    14.219] (II) UnloadModule: "modesetting"
[    14.219] (II) Unloading modesetting
[    14.219] (II) UnloadModule: "fbdev"
[    14.219] (II) Unloading fbdev
[    14.219] (II) UnloadSubModule: "fbdevhw"
[    14.219] (II) Unloading fbdevhw
[    14.219] (II) UnloadModule: "vesa"
[    14.219] (II) Unloading vesa
[    14.219] (==) Depth 24 pixmap format is 32 bpp
[    14.231] (II) intel(0): [DRI2] Setup complete
[    14.231] (II) intel(0): [DRI2]   DRI driver: i965
[    14.231] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    14.249] (II) UXA(0): Driver registered support for the following operations:
[    14.249] (II)         solid
[    14.249] (II)         copy
[    14.250] (II)         composite (RENDER acceleration)
[    14.250] (II)         put_image
[    14.250] (II)         get_image
[    14.250] (==) intel(0): Backing store enabled
[    14.250] (==) intel(0): Silken mouse enabled
[    14.255] (II) intel(0): Initializing HW Cursor
[    14.255] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    14.268] (==) intel(0): DPMS enabled
[    14.268] (==) intel(0): Intel XvMC decoder enabled
[    14.268] (II) intel(0): Set up textured video
[    14.269] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    14.269] (II) intel(0): direct rendering: DRI2 Enabled
[    14.269] (==) intel(0): hotplug detection: "enabled"
[    14.288] (--) RandR disabled
[    14.304] (II) SELinux: Disabled on system
[    14.567] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    14.567] (II) AIGLX: enabled GLX_ARB_create_context
[    14.567] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    14.567] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    14.567] (II) AIGLX: enabled GLX_INTEL_swap_event
[    14.567] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    14.567] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    14.567] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    14.567] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    14.567] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    14.568] (II) AIGLX: Loaded and initialized i965
[    14.568] (II) GLX: Initialized DRI2 GL provider for screen 0
[    14.569] (II) intel(0): Setting screen physical size to 361 x 203
[    15.680] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    15.680] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.680] (II) LoadModule: "evdev"
[    15.692] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.716] (II) Module evdev: vendor="X.Org Foundation"
[    15.717] 	compiled for 1.15.99.904, module version = 2.8.2
[    15.717] 	Module class: X.Org XInput Driver
[    15.717] 	ABI class: X.Org XInput driver, version 21.0
[    15.717] (II) Using input driver 'evdev' for 'Power Button'
[    15.717] (**) Power Button: always reports core events
[    15.717] (**) evdev: Power Button: Device: "/dev/input/event6"
[    15.717] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.717] (--) evdev: Power Button: Found keys
[    15.717] (II) evdev: Power Button: Configuring as keyboard
[    15.717] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6"
[    15.717] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.717] (**) Option "xkb_rules" "evdev"
[    15.717] (**) Option "xkb_model" "pc105"
[    15.717] (**) Option "xkb_layout" "it"
[    15.780] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    15.780] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    15.780] (II) Using input driver 'evdev' for 'Video Bus'
[    15.780] (**) Video Bus: always reports core events
[    15.780] (**) evdev: Video Bus: Device: "/dev/input/event10"
[    15.780] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    15.780] (--) evdev: Video Bus: Found keys
[    15.780] (II) evdev: Video Bus: Configuring as keyboard
[    15.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event10"
[    15.780] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    15.780] (**) Option "xkb_rules" "evdev"
[    15.780] (**) Option "xkb_model" "pc105"
[    15.780] (**) Option "xkb_layout" "it"
[    15.781] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    15.782] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    15.782] (II) Using input driver 'evdev' for 'Video Bus'
[    15.782] (**) Video Bus: always reports core events
[    15.782] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    15.782] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    15.782] (--) evdev: Video Bus: Found keys
[    15.782] (II) evdev: Video Bus: Configuring as keyboard
[    15.782] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input10/event9"
[    15.782] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    15.782] (**) Option "xkb_rules" "evdev"
[    15.782] (**) Option "xkb_model" "pc105"
[    15.782] (**) Option "xkb_layout" "it"
[    15.783] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    15.783] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.783] (II) Using input driver 'evdev' for 'Power Button'
[    15.783] (**) Power Button: always reports core events
[    15.783] (**) evdev: Power Button: Device: "/dev/input/event4"
[    15.783] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.783] (--) evdev: Power Button: Found keys
[    15.783] (II) evdev: Power Button: Configuring as keyboard
[    15.783] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6/event4"
[    15.783] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    15.783] (**) Option "xkb_rules" "evdev"
[    15.783] (**) Option "xkb_model" "pc105"
[    15.783] (**) Option "xkb_layout" "it"
[    15.784] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    15.784] (II) No input driver specified, ignoring this device.
[    15.784] (II) This device may have been added with another device file.
[    15.785] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    15.785] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    15.785] (II) Using input driver 'evdev' for 'Sleep Button'
[    15.785] (**) Sleep Button: always reports core events
[    15.785] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[    15.785] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    15.785] (--) evdev: Sleep Button: Found keys
[    15.785] (II) evdev: Sleep Button: Configuring as keyboard
[    15.785] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7/event5"
[    15.785] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    15.785] (**) Option "xkb_rules" "evdev"
[    15.785] (**) Option "xkb_model" "pc105"
[    15.785] (**) Option "xkb_layout" "it"
[    15.786] (II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event7)
[    15.786] (**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall"
[    15.786] (II) Using input driver 'evdev' for 'WebCam SCB-1100N'
[    15.786] (**) WebCam SCB-1100N: always reports core events
[    15.786] (**) evdev: WebCam SCB-1100N: Device: "/dev/input/event7"
[    15.786] (--) evdev: WebCam SCB-1100N: Vendor 0x2232 Product 0x1008
[    15.786] (--) evdev: WebCam SCB-1100N: Found keys
[    15.786] (II) evdev: WebCam SCB-1100N: Configuring as keyboard
[    15.786] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9/event7"
[    15.786] (II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD, id 11)
[    15.786] (**) Option "xkb_rules" "evdev"
[    15.786] (**) Option "xkb_model" "pc105"
[    15.787] (**) Option "xkb_layout" "it"
[    15.787] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    15.787] (II) No input driver specified, ignoring this device.
[    15.787] (II) This device may have been added with another device file.
[    15.788] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    15.788] (II) No input driver specified, ignoring this device.
[    15.788] (II) This device may have been added with another device file.
[    15.788] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    15.788] (II) No input driver specified, ignoring this device.
[    15.788] (II) This device may have been added with another device file.
[    15.789] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    15.789] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    15.789] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    15.789] (**) Logitech USB Optical Mouse: always reports core events
[    15.789] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[    15.789] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05f
[    15.789] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    15.789] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    15.789] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    15.789] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    15.789] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    15.789] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    15.789] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    15.789] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    15.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05F.0001/input/input2/event1"
[    15.789] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 12)
[    15.790] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    15.790] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    15.790] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    15.790] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    15.790] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    15.790] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    15.790] (II) No input driver specified, ignoring this device.
[    15.790] (II) This device may have been added with another device file.
[    15.791] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    15.791] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    15.791] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    15.791] (**) AT Translated Set 2 keyboard: always reports core events
[    15.791] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    15.791] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    15.791] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    15.791] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    15.791] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    15.791] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    15.791] (**) Option "xkb_rules" "evdev"
[    15.791] (**) Option "xkb_model" "pc105"
[    15.791] (**) Option "xkb_layout" "it"
[    15.792] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[    15.792] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    15.792] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    15.792] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    15.792] (II) LoadModule: "synaptics"
[    15.793] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    15.838] (II) Module synaptics: vendor="X.Org Foundation"
[    15.838] 	compiled for 1.15.99.904, module version = 1.8.0
[    15.838] 	Module class: X.Org XInput Driver
[    15.838] 	ABI class: X.Org XInput driver, version 21.0
[    15.838] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    15.838] (**) ETPS/2 Elantech Touchpad: always reports core events
[    15.838] (**) Option "Device" "/dev/input/event8"
[    15.980] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2508 (res 0)
[    15.980] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1320 (res 0)
[    15.980] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    15.980] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    15.980] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    15.980] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    15.980] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    15.980] (**) ETPS/2 Elantech Touchpad: always reports core events
[    16.044] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event8"
[    16.044] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    16.044] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    16.044] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    16.044] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.071
[    16.044] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    16.045] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    16.045] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    16.045] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    16.045] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    16.045] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    16.045] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    16.046] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    16.046] (II) No input driver specified, ignoring this device.
[    16.046] (II) This device may have been added with another device file.
[    42.255] (II) intel(0): EDID vendor "SEC", prod id 12869
[    42.255] (II) intel(0): Printing DDC gathered Modelines:
[    42.255] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    46.332] (II) intel(0): EDID vendor "SEC", prod id 12869
[    46.332] (II) intel(0): Printing DDC gathered Modelines:
[    46.332] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    47.386] (II) intel(0): EDID vendor "SEC", prod id 12869
[    47.386] (II) intel(0): Printing DDC gathered Modelines:
[    47.386] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    79.999] (II) intel(0): EDID vendor "SEC", prod id 12869
[    79.999] (II) intel(0): Printing DDC gathered Modelines:
[    79.999] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    80.002] (II) intel(0): EDID vendor "SEC", prod id 12869
[    80.002] (II) intel(0): Printing DDC gathered Modelines:
[    80.002] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)

[    14.010] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[    14.010] X Protocol Version 11, Revision 0
[    14.010] Build Operating System: Linux 3.14-2-amd64 x86_64 Debian
[    14.010] Current Operating System: Linux matt-picci 3.14-2-amd64 #1 SMP Debian 3.14.15-2 (2014-08-09) x86_64
[    14.010] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=9a1eda4b-7aaa-4993-b71b-0484a03b332a ro quiet
[    14.011] Build Date: 18 August 2014  10:35:32PM
[    14.011] xorg-server 2:1.16.0-1 (http://www.debian.org/support) 
[    14.011] Current version of pixman: 0.32.6
[    14.011] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.011] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.011] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 18 23:15:01 2014
[    14.040] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.080] (==) No Layout section.  Using the first Screen section.
[    14.080] (==) No screen section available. Using defaults.
[    14.080] (**) |-->Screen "Default Screen Section" (0)
[    14.080] (**) |   |-->Monitor "<default monitor>"
[    14.081] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    14.081] (==) Automatically adding devices
[    14.081] (==) Automatically enabling devices
[    14.081] (==) Automatically adding GPU devices
[    14.116] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    14.116] 	Entry deleted from font path.
[    14.186] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    14.186] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.186] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.186] (II) Loader magic: 0x7f62138c3d80
[    14.186] (II) Module ABI versions:
[    14.186] 	X.Org ANSI C Emulation: 0.4
[    14.186] 	X.Org Video Driver: 18.0
[    14.186] 	X.Org XInput driver : 21.0
[    14.186] 	X.Org Server Extension : 8.0
[    14.187] (II) xfree86: Adding drm device (/dev/dri/card1)
[    17.258] (II) xfree86: Adding drm device (/dev/dri/card0)
[    17.260] (--) PCI:*(0:0:2:0) 8086:0116:144d:c0c1 rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000e000/64
[    17.260] (--) PCI: (0:1:0:0) 10de:0df4:144d:c0c1 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    17.282] (II) LoadModule: "glx"
[    17.326] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.548] (II) Module glx: vendor="X.Org Foundation"
[    17.548] 	compiled for 1.16.0, module version = 1.0.0
[    17.548] 	ABI class: X.Org Server Extension, version 8.0
[    17.548] (==) AIGLX enabled
[    17.548] (==) Matched intel as autoconfigured driver 0
[    17.548] (==) Matched nouveau as autoconfigured driver 1
[    17.548] (==) Matched nv as autoconfigured driver 2
[    17.548] (==) Matched intel as autoconfigured driver 3
[    17.548] (==) Matched modesetting as autoconfigured driver 4
[    17.548] (==) Matched fbdev as autoconfigured driver 5
[    17.548] (==) Matched vesa as autoconfigured driver 6
[    17.548] (==) Assigned the driver to the xf86ConfigLayout
[    17.548] (II) LoadModule: "intel"
[    17.549] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    17.601] (II) Module intel: vendor="X.Org Foundation"
[    17.601] 	compiled for 1.15.99.904, module version = 2.21.15
[    17.601] 	Module class: X.Org Video Driver
[    17.601] 	ABI class: X.Org Video Driver, version 18.0
[    17.601] (II) LoadModule: "nouveau"
[    17.601] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    17.648] (II) Module nouveau: vendor="X.Org Foundation"
[    17.648] 	compiled for 1.15.99.904, module version = 1.0.10
[    17.648] 	Module class: X.Org Video Driver
[    17.648] 	ABI class: X.Org Video Driver, version 18.0
[    17.648] (II) LoadModule: "nv"
[    17.665] (WW) Warning, couldn't open module nv
[    17.666] (II) UnloadModule: "nv"
[    17.666] (II) Unloading nv
[    17.666] (EE) Failed to load module "nv" (module does not exist, 0)
[    17.666] (II) LoadModule: "modesetting"
[    17.666] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.684] (II) Module modesetting: vendor="X.Org Foundation"
[    17.684] 	compiled for 1.15.99.904, module version = 0.9.0
[    17.684] 	Module class: X.Org Video Driver
[    17.684] 	ABI class: X.Org Video Driver, version 18.0
[    17.684] (II) LoadModule: "fbdev"
[    17.684] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.701] (II) Module fbdev: vendor="X.Org Foundation"
[    17.701] 	compiled for 1.15.99.904, module version = 0.4.4
[    17.701] 	Module class: X.Org Video Driver
[    17.701] 	ABI class: X.Org Video Driver, version 18.0
[    17.701] (II) LoadModule: "vesa"
[    17.701] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.719] (II) Module vesa: vendor="X.Org Foundation"
[    17.719] 	compiled for 1.15.99.904, module version = 2.3.3
[    17.719] 	Module class: X.Org Video Driver
[    17.719] 	ABI class: X.Org Video Driver, version 18.0
[    17.719] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    17.725] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    17.725] (II) NOUVEAU driver for NVIDIA chipset families :
[    17.725] 	RIVA TNT        (NV04)
[    17.725] 	RIVA TNT2       (NV05)
[    17.725] 	GeForce 256     (NV10)
[    17.725] 	GeForce 2       (NV11, NV15)
[    17.725] 	GeForce 4MX     (NV17, NV18)
[    17.725] 	GeForce 3       (NV20)
[    17.725] 	GeForce 4Ti     (NV25, NV28)
[    17.725] 	GeForce FX      (NV3x)
[    17.725] 	GeForce 6       (NV4x)
[    17.725] 	GeForce 7       (G7x)
[    17.725] 	GeForce 8       (G8x)
[    17.725] 	GeForce GTX 200 (NVA0)
[    17.725] 	GeForce GTX 400 (NVC0)
[    17.726] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    17.726] (II) FBDEV: driver for framebuffer: fbdev
[    17.726] (II) VESA: driver for VESA chipsets: vesa
[    17.726] (++) using VT number 7

[    17.746] (II) [drm] nouveau interface version: 1.1.1
[    17.746] (WW) Falling back to old probe method for modesetting
[    17.746] (WW) Falling back to old probe method for fbdev
[    17.746] (II) Loading sub module "fbdevhw"
[    17.746] (II) LoadModule: "fbdevhw"
[    17.746] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.764] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.764] 	compiled for 1.16.0, module version = 0.0.2
[    17.764] 	ABI class: X.Org Video Driver, version 18.0
[    17.765] (WW) Falling back to old probe method for vesa
[    17.765] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    17.765] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    17.765] (==) intel(0): RGB weight 888
[    17.765] (==) intel(0): Default visual is TrueColor
[    17.765] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    17.765] (**) intel(0): Relaxed fencing enabled
[    17.765] (**) intel(0): Wait on SwapBuffers? enabled
[    17.765] (**) intel(0): Triple buffering? enabled
[    17.765] (**) intel(0): Framebuffer tiled
[    17.765] (**) intel(0): Pixmaps tiled
[    17.765] (**) intel(0): 3D buffers tiled
[    17.765] (**) intel(0): SwapBuffers wait enabled
[    17.765] (==) intel(0): video overlay key set to 0x101fe
[    17.765] (II) intel(0): Output LVDS1 has no monitor section
[    17.766] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[    17.767] (II) intel(0): Output VGA1 has no monitor section
[    17.767] (II) intel(0): Output HDMI1 has no monitor section
[    17.767] (II) intel(0): Output DP1 has no monitor section
[    17.768] (II) intel(0): EDID for output LVDS1
[    17.768] (II) intel(0): Manufacturer: SEC  Model: 3245  Serial#: 0
[    17.768] (II) intel(0): Year: 2011  Week: 0
[    17.768] (II) intel(0): EDID Version: 1.3
[    17.768] (II) intel(0): Digital Display Input
[    17.768] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    17.768] (II) intel(0): Gamma: 2.20
[    17.768] (II) intel(0): No DPMS capabilities specified
[    17.768] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.768] (II) intel(0): First detailed timing is preferred mode
[    17.768] (II) intel(0): redX: 0.615 redY: 0.335   greenX: 0.335 greenY: 0.610
[    17.768] (II) intel(0): blueX: 0.150 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
[    17.768] (II) intel(0): Manufacturer's mask: 0
[    17.768] (II) intel(0): Supported detailed timing:
[    17.768] (II) intel(0): clock: 70.4 MHz   Image Size:  344 x 194 mm
[    17.768] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[    17.768] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    17.768] (II) intel(0): Unknown vendor-specific block f
[    17.768] (II) intel(0):  SAMSUNG
[    17.768] (II) intel(0):  LTN156AT05000
[    17.768] (II) intel(0): EDID (in hex):
[    17.768] (II) intel(0): 	00ffffffffffff004ca3453200000000
[    17.768] (II) intel(0): 	00150103802213780abda59d55559c26
[    17.768] (II) intel(0): 	19505400000001010101010101010101
[    17.768] (II) intel(0): 	010101010101841b5678500016303020
[    17.768] (II) intel(0): 	250058c2100000190000000f00000000
[    17.768] (II) intel(0): 	00000000002387026401000000fe0053
[    17.768] (II) intel(0): 	414d53554e470a2020202020000000fe
[    17.768] (II) intel(0): 	004c544e313536415430353030300065
[    17.769] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    17.769] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.769] (II) intel(0): Printing probed modes for output LVDS1
[    17.769] (II) intel(0): Modeline "1366x768"x60.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    17.769] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    17.769] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    17.769] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    17.769] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    17.769] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    17.769] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    17.770] (II) intel(0): EDID for output VGA1
[    17.771] (II) intel(0): EDID for output HDMI1
[    17.771] (II) intel(0): EDID for output DP1
[    17.771] (II) intel(0): Output LVDS1 connected
[    17.771] (II) intel(0): Output VGA1 disconnected
[    17.771] (II) intel(0): Output HDMI1 disconnected
[    17.771] (II) intel(0): Output DP1 disconnected
[    17.771] (II) intel(0): Using exact sizes for initial modes
[    17.771] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    17.771] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.771] (II) intel(0): Kernel page flipping support detected, enabling
[    17.771] (==) intel(0): DPI set to (96, 96)
[    17.771] (II) Loading sub module "fb"
[    17.771] (II) LoadModule: "fb"
[    17.771] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.790] (II) Module fb: vendor="X.Org Foundation"
[    17.791] 	compiled for 1.16.0, module version = 1.0.0
[    17.791] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.791] (II) Loading sub module "dri2"
[    17.791] (II) LoadModule: "dri2"
[    17.791] (II) Module "dri2" already built-in
[    17.791] (II) Loading sub module "dri2"
[    17.791] (II) LoadModule: "dri2"
[    17.791] (II) Module "dri2" already built-in
[    17.791] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[    17.791] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[    17.791] (==) NOUVEAU(G0): RGB weight 888
[    17.791] (==) NOUVEAU(G0): Default visual is TrueColor
[    17.791] (==) NOUVEAU(G0): Using HW cursor
[    17.791] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[    17.791] (==) NOUVEAU(G0): Page flipping enabled
[    17.791] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[    17.811] (II) NOUVEAU(G0): Output VGA-1-2 has no monitor section
[    17.821] (II) NOUVEAU(G0): EDID for output VGA-1-2
[    17.821] (II) NOUVEAU(G0): Printing probed modes for output VGA-1-2
[    17.821] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    17.821] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    17.821] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    17.822] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    17.822] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    17.822] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.822] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[    17.822] (**) NOUVEAU(G0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    17.822] (II) NOUVEAU(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    17.822] (**) NOUVEAU(G0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    17.822] (II) NOUVEAU(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    17.822] (**) NOUVEAU(G0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    17.822] (II) NOUVEAU(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    17.822] (**) NOUVEAU(G0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[    17.822] (II) NOUVEAU(G0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    17.822] (**) NOUVEAU(G0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    17.822] (II) NOUVEAU(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    17.822] (==) NOUVEAU(G0): DPI set to (96, 96)
[    17.822] (II) Loading sub module "fb"
[    17.822] (II) LoadModule: "fb"
[    17.822] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.822] (II) Module fb: vendor="X.Org Foundation"
[    17.822] 	compiled for 1.16.0, module version = 1.0.0
[    17.822] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.822] (II) Loading sub module "exa"
[    17.822] (II) LoadModule: "exa"
[    17.822] (II) Loading /usr/lib/xorg/modules/libexa.so
[    17.840] (II) Module exa: vendor="X.Org Foundation"
[    17.840] 	compiled for 1.16.0, module version = 2.6.0
[    17.840] 	ABI class: X.Org Video Driver, version 18.0
[    17.840] (II) Loading sub module "shadowfb"
[    17.840] (II) LoadModule: "shadowfb"
[    17.840] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    17.851] (II) Module shadowfb: vendor="X.Org Foundation"
[    17.852] 	compiled for 1.16.0, module version = 1.0.0
[    17.852] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.852] (II) UnloadModule: "modesetting"
[    17.852] (II) Unloading modesetting
[    17.852] (II) UnloadModule: "fbdev"
[    17.852] (II) Unloading fbdev
[    17.852] (II) UnloadSubModule: "fbdevhw"
[    17.852] (II) Unloading fbdevhw
[    17.852] (II) UnloadModule: "vesa"
[    17.852] (II) Unloading vesa
[    17.852] (==) Depth 24 pixmap format is 32 bpp
[    17.855] (II) NOUVEAU(G0): Opened GPU channel 0
[    17.913] (II) NOUVEAU(G0): [DRI2] Setup complete
[    17.913] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[    17.913] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[    17.932] (II) EXA(256): Driver allocated offscreen pixmaps
[    17.932] (II) EXA(256): Driver registered support for the following operations:
[    17.932] (II)         Solid
[    17.932] (II)         Copy
[    17.932] (II)         Composite (RENDER acceleration)
[    17.932] (II)         UploadToScreen
[    17.932] (II)         DownloadFromScreen
[    17.932] (==) NOUVEAU(G0): Backing store enabled
[    17.932] (==) NOUVEAU(G0): Silken mouse enabled
[    17.945] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    17.945] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[    17.945] (==) NOUVEAU(G0): DPMS enabled
[    17.945] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.953] (II) intel(0): [DRI2] Setup complete
[    17.953] (II) intel(0): [DRI2]   DRI driver: i965
[    17.953] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    17.954] (II) UXA(0): Driver registered support for the following operations:
[    17.955] (II)         solid
[    17.955] (II)         copy
[    17.955] (II)         composite (RENDER acceleration)
[    17.955] (II)         put_image
[    17.955] (II)         get_image
[    17.955] (==) intel(0): Backing store enabled
[    17.955] (==) intel(0): Silken mouse enabled
[    17.955] (II) intel(0): Initializing HW Cursor
[    17.955] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.956] (==) intel(0): DPMS enabled
[    17.956] (==) intel(0): Intel XvMC decoder enabled
[    17.956] (II) intel(0): Set up textured video
[    17.956] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    17.956] (II) intel(0): direct rendering: DRI2 Enabled
[    17.956] (==) intel(0): hotplug detection: "enabled"
[    17.976] (--) RandR disabled
[    17.994] (II) SELinux: Disabled on system
[    18.393] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    18.393] (II) AIGLX: enabled GLX_ARB_create_context
[    18.393] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    18.393] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    18.393] (II) AIGLX: enabled GLX_INTEL_swap_event
[    18.393] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    18.393] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    18.393] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    18.393] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    18.393] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    18.394] (II) AIGLX: Loaded and initialized i965
[    18.394] (II) GLX: Initialized DRI2 GL provider for screen 0
[    18.396] (II) NOUVEAU(G0): NVEnterVT is called.
[    18.397] (II) intel(0): Setting screen physical size to 361 x 203
[    19.335] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    19.335] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.335] (II) LoadModule: "evdev"
[    19.335] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    19.370] (II) Module evdev: vendor="X.Org Foundation"
[    19.370] 	compiled for 1.15.99.904, module version = 2.8.2
[    19.370] 	Module class: X.Org XInput Driver
[    19.370] 	ABI class: X.Org XInput driver, version 21.0
[    19.370] (II) Using input driver 'evdev' for 'Power Button'
[    19.371] (**) Power Button: always reports core events
[    19.371] (**) evdev: Power Button: Device: "/dev/input/event6"
[    19.371] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.371] (--) evdev: Power Button: Found keys
[    19.371] (II) evdev: Power Button: Configuring as keyboard
[    19.371] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[    19.371] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    19.371] (**) Option "xkb_rules" "evdev"
[    19.371] (**) Option "xkb_model" "pc105"
[    19.371] (**) Option "xkb_layout" "it"
[    19.461] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    19.461] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.461] (II) Using input driver 'evdev' for 'Video Bus'
[    19.461] (**) Video Bus: always reports core events
[    19.461] (**) evdev: Video Bus: Device: "/dev/input/event13"
[    19.461] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.461] (--) evdev: Video Bus: Found keys
[    19.461] (II) evdev: Video Bus: Configuring as keyboard
[    19.461] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[    19.461] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    19.462] (**) Option "xkb_rules" "evdev"
[    19.462] (**) Option "xkb_model" "pc105"
[    19.462] (**) Option "xkb_layout" "it"
[    19.463] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    19.463] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    19.463] (II) Using input driver 'evdev' for 'Video Bus'
[    19.463] (**) Video Bus: always reports core events
[    19.463] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    19.463] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    19.463] (--) evdev: Video Bus: Found keys
[    19.463] (II) evdev: Video Bus: Configuring as keyboard
[    19.463] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input13/event12"
[    19.463] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    19.463] (**) Option "xkb_rules" "evdev"
[    19.463] (**) Option "xkb_model" "pc105"
[    19.463] (**) Option "xkb_layout" "it"
[    19.464] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    19.464] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.464] (II) Using input driver 'evdev' for 'Power Button'
[    19.464] (**) Power Button: always reports core events
[    19.464] (**) evdev: Power Button: Device: "/dev/input/event4"
[    19.464] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.464] (--) evdev: Power Button: Found keys
[    19.464] (II) evdev: Power Button: Configuring as keyboard
[    19.464] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event4"
[    19.464] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    19.464] (**) Option "xkb_rules" "evdev"
[    19.464] (**) Option "xkb_model" "pc105"
[    19.464] (**) Option "xkb_layout" "it"
[    19.465] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    19.465] (II) No input driver specified, ignoring this device.
[    19.465] (II) This device may have been added with another device file.
[    19.465] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    19.465] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    19.465] (II) Using input driver 'evdev' for 'Sleep Button'
[    19.465] (**) Sleep Button: always reports core events
[    19.465] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[    19.465] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    19.465] (--) evdev: Sleep Button: Found keys
[    19.465] (II) evdev: Sleep Button: Configuring as keyboard
[    19.465] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event5"
[    19.465] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    19.465] (**) Option "xkb_rules" "evdev"
[    19.465] (**) Option "xkb_model" "pc105"
[    19.465] (**) Option "xkb_layout" "it"
[    19.467] (II) config/udev: Adding input device WebCam SCB-1100N (/dev/input/event10)
[    19.467] (**) WebCam SCB-1100N: Applying InputClass "evdev keyboard catchall"
[    19.467] (II) Using input driver 'evdev' for 'WebCam SCB-1100N'
[    19.467] (**) WebCam SCB-1100N: always reports core events
[    19.467] (**) evdev: WebCam SCB-1100N: Device: "/dev/input/event10"
[    19.467] (--) evdev: WebCam SCB-1100N: Vendor 0x2232 Product 0x1008
[    19.467] (--) evdev: WebCam SCB-1100N: Found keys
[    19.467] (II) evdev: WebCam SCB-1100N: Configuring as keyboard
[    19.467] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event10"
[    19.467] (II) XINPUT: Adding extended input device "WebCam SCB-1100N" (type: KEYBOARD, id 11)
[    19.467] (**) Option "xkb_rules" "evdev"
[    19.467] (**) Option "xkb_model" "pc105"
[    19.467] (**) Option "xkb_layout" "it"
[    19.468] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    19.468] (II) No input driver specified, ignoring this device.
[    19.468] (II) This device may have been added with another device file.
[    19.468] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[    19.468] (II) No input driver specified, ignoring this device.
[    19.468] (II) This device may have been added with another device file.
[    19.469] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    19.469] (II) No input driver specified, ignoring this device.
[    19.469] (II) This device may have been added with another device file.
[    19.469] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[    19.469] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    19.469] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    19.469] (**) Logitech USB Optical Mouse: always reports core events
[    19.469] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[    19.469] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05f
[    19.469] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[    19.470] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    19.470] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    19.470] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    19.470] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    19.470] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    19.470] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    19.470] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05F.0001/input/input2/event1"
[    19.470] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 12)
[    19.470] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    19.470] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    19.470] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    19.470] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    19.470] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    19.471] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[    19.471] (II) No input driver specified, ignoring this device.
[    19.471] (II) This device may have been added with another device file.
[    19.471] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    19.471] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    19.471] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    19.471] (**) AT Translated Set 2 keyboard: always reports core events
[    19.471] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    19.471] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    19.471] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    19.471] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    19.471] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    19.471] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    19.471] (**) Option "xkb_rules" "evdev"
[    19.471] (**) Option "xkb_model" "pc105"
[    19.471] (**) Option "xkb_layout" "it"
[    19.472] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event11)
[    19.472] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    19.472] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    19.472] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    19.472] (II) LoadModule: "synaptics"
[    19.473] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    19.557] (II) Module synaptics: vendor="X.Org Foundation"
[    19.557] 	compiled for 1.15.99.904, module version = 1.8.0
[    19.557] 	Module class: X.Org XInput Driver
[    19.557] 	ABI class: X.Org XInput driver, version 21.0
[    19.557] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    19.557] (**) ETPS/2 Elantech Touchpad: always reports core events
[    19.557] (**) Option "Device" "/dev/input/event11"
[    19.756] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2508 (res 0)
[    19.756] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1320 (res 0)
[    19.756] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    19.756] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    19.756] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    19.756] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    19.756] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    19.756] (**) ETPS/2 Elantech Touchpad: always reports core events
[    19.836] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event11"
[    19.836] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    19.836] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    19.836] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[    19.836] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.071
[    19.836] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    19.836] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    19.836] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    19.837] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    19.837] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    19.837] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    19.837] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    19.838] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    19.838] (II) No input driver specified, ignoring this device.
[    19.838] (II) This device may have been added with another device file.
[    19.844] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[    19.844] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[    19.844] (II) NOUVEAU(G0): NVLeaveVT is called.
[    19.845] (II) NOUVEAU(G0): Closed GPU channel 0
[    19.845] (II) UnloadModule: "nouveau"
[    19.845] (II) UnloadSubModule: "shadowfb"
[    19.845] (II) Unloading shadowfb
[    19.845] (II) UnloadSubModule: "exa"
[    19.845] (II) Unloading exa
[    19.845] (II) UnloadSubModule: "fb"
[    19.845] (II) Unloading fb
[    19.845] (II) config/udev: Adding drm device (/dev/dri/card1)
[    19.845] (II) xfree86: Adding drm device (/dev/dri/card1)
[    19.846] (II) LoadModule: "modesetting"
[    19.846] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    19.846] (II) Module modesetting: vendor="X.Org Foundation"
[    19.846] 	compiled for 1.15.99.904, module version = 0.9.0
[    19.846] 	Module class: X.Org Video Driver
[    19.846] 	ABI class: X.Org Video Driver, version 18.0
[    19.846] xf86: found device 1
[    19.846] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1/card1-VGA-2 (null)
[    47.312] (II) intel(0): EDID vendor "SEC", prod id 12869
[    47.312] (II) intel(0): Printing DDC gathered Modelines:
[    47.312] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    51.820] (II) intel(0): EDID vendor "SEC", prod id 12869
[    51.820] (II) intel(0): Printing DDC gathered Modelines:
[    51.820] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    53.363] (II) intel(0): EDID vendor "SEC", prod id 12869
[    53.363] (II) intel(0): Printing DDC gathered Modelines:
[    53.363] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    87.517] (II) intel(0): EDID vendor "SEC", prod id 12869
[    87.517] (II) intel(0): Printing DDC gathered Modelines:
[    87.517] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    87.520] (II) intel(0): EDID vendor "SEC", prod id 12869
[    87.520] (II) intel(0): Printing DDC gathered Modelines:
[    87.520] (II) intel(0): Modeline "1366x768"x0.0   70.44  1366 1414 1446 1486  768 770 775 790 -hsync -vsync (47.4 kHz eP)

Reply to:

References:
- Bug#758217: xserver-xorg-video-nouveau: Nvidia card no more listed in 'xrandr --listproviders' on Optimus laptop
  - From: Marco Mattiolo <marco.mattiolo@hotmail.it>
- Bug#758217: xserver-xorg-video-nouveau: Nvidia card no more listed in 'xrandr --listproviders' on Optimus laptop
  - From: Sven Joachim <svenjoac@gmx.de>

Prev by Date: Bug#758574: xserver-xorg-core: Xserver crashes during initialization of XDMCP session
Next by Date: Bug#758002: xserver-xorg-video-radeon: If there is no open session, the system crashes
Previous by thread: Bug#758217: xserver-xorg-video-nouveau: Nvidia card no more listed in 'xrandr --listproviders' on Optimus laptop
Next by thread: Bug#758269: libdrm-nouveau2: Libdrm2 breaks tasks on vlc to acces on drm
Index(es):
- Date
- Thread