[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#754822: ETPS/2 Elantech Touchpad horribly slow, unconfigurable in Xfce



Package: xserver-xorg-input-synaptics
Version: 1.8.0-1
Severity: important

I'm not at all sure if this is the right package.  This may be a problem
with the core X server instead, particularly since downgrading this
package to the previous version didn't correct this problem.  But since
it's clearly related to the touchpad driver, I thought I'd start here.

Sometime between July 8th and today (July 14th) on a system tracking
unstable, something about the X configuration and packages changed so as
to seriously impact the configuration of my touchpad, an ETPS/2 Elantech
that uses the synaptics driver.  The symptoms were that, after an X server
restart, the mouse cursor was pinned to a very, very slow speed with
zero acceleration.  (It took four or five swipes across the touchpad to
move the cursor across the screen.)  The Xfce Mouse settings dialog had
absolutely no effect on the mouse speed or acceleration, no matter how I
changed the sliders.  (It previously worked fine.)

I tried downgrading xserver-xorg-input-synaptics to 1.7.3-1+b2, but that
did not resolve the problem.  This makes me think that the problem may
instead be with the xserver-xorg-core upgrade from 1.15.1-1 to
1.15.99.904-1, or one of the various rebuilds of the other xserver-xorg
input drivers or synaptics driver, but I'm not sure.  I haven't tried
downgrading everything.

Using:

    xinput --set-prop 11 274 5.0 12.0 0.3 0.0

to manually set the Synaptics mouse acceleration *does* work and restores
reasonable mouse behavior, although as you can see the numbers I have to
use are much higher than the default values around 1.5.  These also seem
much higher than the default values on various web sites about how to
manually configure the Synaptics driver.

My previous Xfce settings were:

* Acceleration: 1.5
* Sensitivity: 30 px

I have no idea how that's intended to map to the Synaptics values.

-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jun 21  2013 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2356320 Jul  8 06:30 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)

/etc/X11/xorg.conf does not exist.

/etc/modprobe.d contains no KMS configuration files.

Kernel version (/proc/version):
-------------------------------
Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-4) ) #1 SMP Debian 3.14.12-1 (2014-07-11)

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 25117 Jul 14 09:24 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[   982.852] 
X.Org X Server 1.15.99.904 (1.16.0 RC 4)
Release Date: 2014-07-07
[   982.852] X Protocol Version 11, Revision 0
[   982.852] Build Operating System: Linux 3.14-1-amd64 x86_64 Debian
[   982.852] Current Operating System: Linux wanderer 3.14-1-amd64 #1 SMP Debian 3.14.12-1 (2014-07-11) x86_64
[   982.852] Kernel command line: BOOT_IMAGE=/vmlinuz-3.14-1-amd64 root=/dev/mapper/wanderer-root ro init=/bin/systemd quiet systemd.show_status=true
[   982.852] Build Date: 08 July 2014  01:26:43PM
[   982.852] xorg-server 2:1.15.99.904-1 (http://www.debian.org/support) 
[   982.852] Current version of pixman: 0.32.6
[   982.852] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   982.852] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   982.852] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 14 09:23:56 2014
[   982.852] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   982.852] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   982.853] (==) No Layout section.  Using the first Screen section.
[   982.853] (==) No screen section available. Using defaults.
[   982.853] (**) |-->Screen "Default Screen Section" (0)
[   982.853] (**) |   |-->Monitor "<default monitor>"
[   982.853] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   982.853] (==) Automatically adding devices
[   982.853] (==) Automatically enabling devices
[   982.853] (==) Automatically adding GPU devices
[   982.853] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   982.853] 	Entry deleted from font path.
[   982.853] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[   982.853] (==) ModulePath set to "/usr/lib/xorg/modules"
[   982.853] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   982.853] (II) Loader magic: 0x7fb2b2efdd80
[   982.853] (II) Module ABI versions:
[   982.853] 	X.Org ANSI C Emulation: 0.4
[   982.853] 	X.Org Video Driver: 18.0
[   982.853] 	X.Org XInput driver : 21.0
[   982.853] 	X.Org Server Extension : 8.0
[   982.854] (II) xfree86: Adding drm device (/dev/dri/card0)
[   982.855] (--) PCI:*(0:0:2:0) 8086:0166:1558:2706 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[   982.855] (II) LoadModule: "glx"
[   982.855] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   982.857] (II) Module glx: vendor="X.Org Foundation"
[   982.857] 	compiled for 1.15.99.904, module version = 1.0.0
[   982.857] 	ABI class: X.Org Server Extension, version 8.0
[   982.857] (==) AIGLX enabled
[   982.857] (==) Matched intel as autoconfigured driver 0
[   982.857] (==) Matched intel as autoconfigured driver 1
[   982.857] (==) Matched modesetting as autoconfigured driver 2
[   982.857] (==) Matched fbdev as autoconfigured driver 3
[   982.857] (==) Matched vesa as autoconfigured driver 4
[   982.857] (==) Assigned the driver to the xf86ConfigLayout
[   982.857] (II) LoadModule: "intel"
[   982.857] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   982.857] (II) Module intel: vendor="X.Org Foundation"
[   982.858] 	compiled for 1.15.99.904, module version = 2.21.15
[   982.858] 	Module class: X.Org Video Driver
[   982.858] 	ABI class: X.Org Video Driver, version 18.0
[   982.858] (II) LoadModule: "modesetting"
[   982.858] (WW) Warning, couldn't open module modesetting
[   982.858] (II) UnloadModule: "modesetting"
[   982.858] (II) Unloading modesetting
[   982.858] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   982.858] (II) LoadModule: "fbdev"
[   982.858] (WW) Warning, couldn't open module fbdev
[   982.858] (II) UnloadModule: "fbdev"
[   982.858] (II) Unloading fbdev
[   982.858] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   982.858] (II) LoadModule: "vesa"
[   982.858] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   982.858] (II) Module vesa: vendor="X.Org Foundation"
[   982.858] 	compiled for 1.15.99.904, module version = 2.3.3
[   982.858] 	Module class: X.Org Video Driver
[   982.858] 	ABI class: X.Org Video Driver, version 18.0
[   982.858] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[   982.859] (II) VESA: driver for VESA chipsets: vesa
[   982.859] (++) using VT number 7

[   982.869] (WW) Falling back to old probe method for vesa
[   982.869] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   982.869] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   982.869] (==) intel(0): RGB weight 888
[   982.869] (==) intel(0): Default visual is TrueColor
[   982.869] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[   982.869] (**) intel(0): Relaxed fencing enabled
[   982.869] (**) intel(0): Wait on SwapBuffers? enabled
[   982.869] (**) intel(0): Triple buffering? enabled
[   982.869] (**) intel(0): Framebuffer tiled
[   982.869] (**) intel(0): Pixmaps tiled
[   982.869] (**) intel(0): 3D buffers tiled
[   982.869] (**) intel(0): SwapBuffers wait enabled
[   982.869] (==) intel(0): video overlay key set to 0x101fe
[   982.869] (II) intel(0): Output LVDS1 has no monitor section
[   982.870] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   982.871] (II) intel(0): Output VGA1 has no monitor section
[   982.872] (II) intel(0): Output HDMI1 has no monitor section
[   982.872] (II) intel(0): Output DP1 has no monitor section
[   982.872] (II) intel(0): EDID for output LVDS1
[   982.872] (II) intel(0): Manufacturer: LGD  Model: 1e9  Serial#: 0
[   982.872] (II) intel(0): Year: 2009  Week: 0
[   982.872] (II) intel(0): EDID Version: 1.3
[   982.872] (II) intel(0): Digital Display Input
[   982.872] (II) intel(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[   982.872] (II) intel(0): Gamma: 2.20
[   982.872] (II) intel(0): No DPMS capabilities specified
[   982.872] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   982.872] (II) intel(0): First detailed timing is preferred mode
[   982.872] (II) intel(0): redX: 0.621 redY: 0.352   greenX: 0.314 greenY: 0.586
[   982.872] (II) intel(0): blueX: 0.147 blueY: 0.118   whiteX: 0.313 whiteY: 0.329
[   982.872] (II) intel(0): Manufacturer's mask: 0
[   982.872] (II) intel(0): Supported detailed timing:
[   982.872] (II) intel(0): clock: 138.5 MHz   Image Size:  345 x 194 mm
[   982.872] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[   982.872] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[   982.872] (II) intel(0):  LG Display
[   982.872] (II) intel(0):  LP156WF1-TLC1
[   982.872] (II) intel(0): EDID (in hex):
[   982.872] (II) intel(0): 	00ffffffffffff0030e4e90100000000
[   982.872] (II) intel(0): 	00130103802313780a08d59f5a509625
[   982.872] (II) intel(0): 	1e505400000001010101010101010101
[   982.872] (II) intel(0): 	0101010101011a3680a070381f403020
[   982.872] (II) intel(0): 	350059c2100000190000000000000000
[   982.872] (II) intel(0): 	00000000000000000000000000fe004c
[   982.872] (II) intel(0): 	4720446973706c61790a2020000000fe
[   982.872] (II) intel(0): 	004c503135365746312d544c433100b0
[   982.873] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[   982.873] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   982.873] (II) intel(0): Printing probed modes for output LVDS1
[   982.873] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[   982.873] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[   982.873] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   982.873] (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[   982.873] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   982.873] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   982.873] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[   982.873] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   982.873] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   982.873] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   982.873] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[   982.873] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   982.873] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   982.873] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   982.873] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   982.874] (II) intel(0): EDID for output VGA1
[   982.875] (II) intel(0): EDID for output HDMI1
[   982.875] (II) intel(0): EDID for output DP1
[   982.875] (II) intel(0): Output LVDS1 connected
[   982.875] (II) intel(0): Output VGA1 disconnected
[   982.875] (II) intel(0): Output HDMI1 disconnected
[   982.875] (II) intel(0): Output DP1 disconnected
[   982.875] (II) intel(0): Using exact sizes for initial modes
[   982.875] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[   982.875] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   982.875] (II) intel(0): Kernel page flipping support detected, enabling
[   982.875] (==) intel(0): DPI set to (96, 96)
[   982.875] (II) Loading sub module "fb"
[   982.875] (II) LoadModule: "fb"
[   982.875] (II) Loading /usr/lib/xorg/modules/libfb.so
[   982.875] (II) Module fb: vendor="X.Org Foundation"
[   982.875] 	compiled for 1.15.99.904, module version = 1.0.0
[   982.876] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   982.876] (II) Loading sub module "dri2"
[   982.876] (II) LoadModule: "dri2"
[   982.876] (II) Module "dri2" already built-in
[   982.876] (II) UnloadModule: "vesa"
[   982.876] (II) Unloading vesa
[   982.876] (==) Depth 24 pixmap format is 32 bpp
[   982.876] (II) intel(0): [DRI2] Setup complete
[   982.876] (II) intel(0): [DRI2]   DRI driver: i965
[   982.876] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[   982.877] (II) UXA(0): Driver registered support for the following operations:
[   982.877] (II)         solid
[   982.877] (II)         copy
[   982.877] (II)         composite (RENDER acceleration)
[   982.877] (II)         put_image
[   982.877] (II)         get_image
[   982.877] (==) intel(0): Backing store enabled
[   982.877] (==) intel(0): Silken mouse enabled
[   982.877] (II) intel(0): Initializing HW Cursor
[   982.877] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   982.880] (==) intel(0): DPMS enabled
[   982.880] (==) intel(0): Intel XvMC decoder enabled
[   982.880] (II) intel(0): Set up textured video
[   982.880] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   982.880] (II) intel(0): direct rendering: DRI2 Enabled
[   982.880] (==) intel(0): hotplug detection: "enabled"
[   982.904] (--) RandR disabled
[   982.910] (II) SELinux: Disabled on system
[   982.926] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   982.926] (II) AIGLX: enabled GLX_ARB_create_context
[   982.926] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   982.926] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   982.926] (II) AIGLX: enabled GLX_INTEL_swap_event
[   982.926] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   982.926] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   982.926] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   982.926] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   982.926] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   982.926] (II) AIGLX: Loaded and initialized i965
[   982.926] (II) GLX: Initialized DRI2 GL provider for screen 0
[   982.927] (II) intel(0): Setting screen physical size to 508 x 285
[   982.960] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   982.960] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   982.960] (II) LoadModule: "evdev"
[   982.960] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   982.960] (II) Module evdev: vendor="X.Org Foundation"
[   982.960] 	compiled for 1.15.99.904, module version = 2.8.2
[   982.960] 	Module class: X.Org XInput Driver
[   982.960] 	ABI class: X.Org XInput driver, version 21.0
[   982.960] (II) Using input driver 'evdev' for 'Power Button'
[   982.960] (**) Power Button: always reports core events
[   982.960] (**) evdev: Power Button: Device: "/dev/input/event5"
[   982.960] (--) evdev: Power Button: Vendor 0 Product 0x1
[   982.960] (--) evdev: Power Button: Found keys
[   982.960] (II) evdev: Power Button: Configuring as keyboard
[   982.960] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event5"
[   982.960] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   982.960] (**) Option "xkb_rules" "evdev"
[   982.960] (**) Option "xkb_model" "pc105"
[   982.960] (**) Option "xkb_layout" "us"
[   982.961] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   982.961] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   982.961] (II) Using input driver 'evdev' for 'Video Bus'
[   982.961] (**) Video Bus: always reports core events
[   982.961] (**) evdev: Video Bus: Device: "/dev/input/event6"
[   982.961] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   982.961] (--) evdev: Video Bus: Found keys
[   982.961] (II) evdev: Video Bus: Configuring as keyboard
[   982.961] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14/event6"
[   982.961] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   982.961] (**) Option "xkb_rules" "evdev"
[   982.961] (**) Option "xkb_model" "pc105"
[   982.961] (**) Option "xkb_layout" "us"
[   982.961] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   982.961] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   982.961] (II) Using input driver 'evdev' for 'Power Button'
[   982.961] (**) Power Button: always reports core events
[   982.961] (**) evdev: Power Button: Device: "/dev/input/event2"
[   982.961] (--) evdev: Power Button: Vendor 0 Product 0x1
[   982.961] (--) evdev: Power Button: Found keys
[   982.961] (II) evdev: Power Button: Configuring as keyboard
[   982.961] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8/event2"
[   982.961] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   982.961] (**) Option "xkb_rules" "evdev"
[   982.961] (**) Option "xkb_model" "pc105"
[   982.961] (**) Option "xkb_layout" "us"
[   982.962] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[   982.962] (II) No input driver specified, ignoring this device.
[   982.962] (II) This device may have been added with another device file.
[   982.962] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   982.962] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   982.962] (II) Using input driver 'evdev' for 'Sleep Button'
[   982.962] (**) Sleep Button: always reports core events
[   982.962] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[   982.962] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   982.962] (--) evdev: Sleep Button: Found keys
[   982.962] (II) evdev: Sleep Button: Configuring as keyboard
[   982.962] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9/event3"
[   982.962] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   982.962] (**) Option "xkb_rules" "evdev"
[   982.962] (**) Option "xkb_model" "pc105"
[   982.962] (**) Option "xkb_layout" "us"
[   982.962] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[   982.962] (II) No input driver specified, ignoring this device.
[   982.962] (II) This device may have been added with another device file.
[   982.963] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[   982.963] (II) No input driver specified, ignoring this device.
[   982.963] (II) This device may have been added with another device file.
[   982.963] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[   982.963] (II) No input driver specified, ignoring this device.
[   982.963] (II) This device may have been added with another device file.
[   982.963] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   982.963] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   982.963] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   982.963] (**) AT Translated Set 2 keyboard: always reports core events
[   982.963] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   982.963] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   982.963] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   982.963] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   982.963] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   982.963] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   982.963] (**) Option "xkb_rules" "evdev"
[   982.963] (**) Option "xkb_model" "pc105"
[   982.963] (**) Option "xkb_layout" "us"
[   982.964] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[   982.964] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[   982.964] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[   982.964] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[   982.964] (II) LoadModule: "synaptics"
[   982.964] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   982.964] (II) Module synaptics: vendor="X.Org Foundation"
[   982.964] 	compiled for 1.15.99.904, module version = 1.8.0
[   982.964] 	Module class: X.Org XInput Driver
[   982.964] 	ABI class: X.Org XInput driver, version 21.0
[   982.964] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[   982.964] (**) ETPS/2 Elantech Touchpad: always reports core events
[   982.964] (**) Option "Device" "/dev/input/event10"
[   983.108] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436 (res 0)
[   983.108] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044 (res 0)
[   983.108] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[   983.108] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[   983.108] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[   983.108] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[   983.108] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   983.108] (**) ETPS/2 Elantech Touchpad: always reports core events
[   983.196] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input13/event10"
[   983.196] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
[   983.196] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[   983.196] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[   983.196] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.075
[   983.196] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[   983.196] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[   983.196] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[   983.196] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[   983.196] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   983.197] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[   983.197] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   983.197] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[   983.197] (II) No input driver specified, ignoring this device.
[   983.197] (II) This device may have been added with another device file.
[   983.474] (II) intel(0): EDID vendor "LGD", prod id 489
[   983.474] (II) intel(0): Printing DDC gathered Modelines:
[   983.474] (II) intel(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[   983.554] (II) intel(0): EDID vendor "LGD", prod id 489
[   983.554] (II) intel(0): Printing DDC gathered Modelines:
[   983.554] (II) intel(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[   991.853] (II) intel(0): EDID vendor "LGD", prod id 489
[   991.853] (II) intel(0): Printing DDC gathered Modelines:
[   991.853] (II) intel(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[   992.182] (II) intel(0): EDID vendor "LGD", prod id 489
[   992.185] (II) intel(0): Printing DDC gathered Modelines:
[   992.185] (II) intel(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[   992.188] (II) intel(0): EDID vendor "LGD", prod id 489
[   992.188] (II) intel(0): Printing DDC gathered Modelines:
[   992.188] (II) intel(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=942060

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event5
E: DMI_VENDOR=System76, Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=197263
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=819115

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14/event6
E: DMI_VENDOR=System76, Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=819215
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=937894

P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8/event2
E: DMI_VENDOR=System76, Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=196726
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=940680

P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10/event4
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=197087

P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=939290

P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9/event3
E: DMI_VENDOR=System76, Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=196910
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel PCH Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=272587

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=272716

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=272479

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input16/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input16/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=272569

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel PCH HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=272392

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input17/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input17/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=272415

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab83
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=81020

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=System76, Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=196343
E: XKBLAYOUT=us
E: XKBMODEL=pc105

P: /devices/platform/i8042/serio2/input/input13
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio2/input/input13
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ee0000-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="ETPS/2 Elantech Touchpad"
E: PHYS="isa0060/serio2/input0"
E: PRODUCT=11/2/e/0
E: PROP=1
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=382605

P: /devices/platform/i8042/serio2/input/input13/event10
N: input/event10
S: input/by-path/platform-i8042-serio-2-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/platform/i8042/serio2/input/input13/event10
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=382844

P: /devices/platform/i8042/serio2/input/input13/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-2-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio2/input/input13/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=382816

P: /devices/platform/pcspkr/input/input7
E: DEVPATH=/devices/platform/pcspkr/input/input7
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=887384

P: /devices/platform/pcspkr/input/input7/event1
N: input/event1
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/pcspkr/input/input7/event1
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=196523


DRM Information from dmesg:
---------------------------
[    0.000000] No AGP bridge found
[    0.000000] No AGP bridge found
[    2.033724] Linux agpgart interface v0.103
[   17.987603] [drm] Initialized drm 1.1.0 20060810
[   18.020307] [drm] Memory usable by graphics device = 2048M
[   18.072419] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   18.072420] [drm] Driver supports precise vblank timestamp query.
[   18.119008] fbcon: inteldrmfb (fb0) is primary device
[   18.841643] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   18.852236] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.826336] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 3.14-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg-input-synaptics depends on:
ii  libc6                                  2.19-7
ii  libevdev2                              1.2.2+dfsg-1
ii  libx11-6                               2:1.6.2-2
ii  libxi6                                 2:1.7.2-1
ii  xserver-xorg-core [xorg-input-abi-21]  2:1.15.99.904-1

xserver-xorg-input-synaptics recommends no packages.

Versions of packages xserver-xorg-input-synaptics suggests:
pn  gpointing-device-settings  <none>
pn  touchfreeze                <none>

-- no debconf information


Reply to: