Bug#750503: libgl1-mesa-dri: chrash after update to 10.1.4-1
Package: libgl1-mesa-dri
Version: 10.1.4-1
Severity: critical
Justification: breaks the whole system
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
INFO: See at the end of Xorg.1.log for the info to the bug.
-- Package-specific info:
glxinfo:
--------
DISPLAY is not set.
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 May 14 23:49 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2327520 Apr 15 21:01 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 3.14-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 8863 May 21 02:21 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 8863 May 21 02:21 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 8863 May 21 02:21 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 8863 May 21 02:21 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 46326 Jun 3 21:31 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 45523 Jun 4 00:15 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 4.627]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 4.627] X Protocol Version 11, Revision 0
[ 4.627] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[ 4.627] Current Operating System: Linux chewbaccaXpsTux 3.14-1-amd64 #1 SMP Debian 3.14.4-1 (2014-05-13) x86_64
[ 4.627] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=1f853ecb-24ec-400b-a9bf-527f34677523 ro quiet
[ 4.627] Build Date: 15 April 2014 06:58:36PM
[ 4.627] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 4.627] Current version of pixman: 0.32.4
[ 4.627] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.627] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.627] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 4 00:15:20 2014
[ 4.628] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.630] (==) No Layout section. Using the first Screen section.
[ 4.630] (==) No screen section available. Using defaults.
[ 4.630] (**) |-->Screen "Default Screen Section" (0)
[ 4.630] (**) | |-->Monitor "<default monitor>"
[ 4.630] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.630] (==) Automatically adding devices
[ 4.630] (==) Automatically enabling devices
[ 4.630] (==) Automatically adding GPU devices
[ 4.632] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4.632] Entry deleted from font path.
[ 4.632] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4.632] Entry deleted from font path.
[ 4.632] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4.632] Entry deleted from font path.
[ 4.634] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4.634] Entry deleted from font path.
[ 4.634] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4.634] Entry deleted from font path.
[ 4.634] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 4.634] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.634] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.634] (II) Loader magic: 0x7f2b99e5ad40
[ 4.634] (II) Module ABI versions:
[ 4.634] X.Org ANSI C Emulation: 0.4
[ 4.634] X.Org Video Driver: 15.0
[ 4.634] X.Org XInput driver : 20.0
[ 4.634] X.Org Server Extension : 8.0
[ 4.635] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 13.525] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.527] (--) PCI:*(0:0:2:0) 8086:0416:1028:05fe rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 13.527] (--) PCI: (0:2:0:0) 10de:0fe4:1028:05fe rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 13.527] Initializing built-in extension Generic Event Extension
[ 13.527] Initializing built-in extension SHAPE
[ 13.527] Initializing built-in extension MIT-SHM
[ 13.527] Initializing built-in extension XInputExtension
[ 13.527] Initializing built-in extension XTEST
[ 13.527] Initializing built-in extension BIG-REQUESTS
[ 13.527] Initializing built-in extension SYNC
[ 13.527] Initializing built-in extension XKEYBOARD
[ 13.527] Initializing built-in extension XC-MISC
[ 13.527] Initializing built-in extension SECURITY
[ 13.527] Initializing built-in extension XINERAMA
[ 13.527] Initializing built-in extension XFIXES
[ 13.527] Initializing built-in extension RENDER
[ 13.527] Initializing built-in extension RANDR
[ 13.527] Initializing built-in extension COMPOSITE
[ 13.527] Initializing built-in extension DAMAGE
[ 13.527] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.527] Initializing built-in extension DOUBLE-BUFFER
[ 13.527] Initializing built-in extension RECORD
[ 13.527] Initializing built-in extension DPMS
[ 13.527] Initializing built-in extension Present
[ 13.527] Initializing built-in extension DRI3
[ 13.527] Initializing built-in extension X-Resource
[ 13.527] Initializing built-in extension XVideo
[ 13.527] Initializing built-in extension XVideo-MotionCompensation
[ 13.527] Initializing built-in extension SELinux
[ 13.527] Initializing built-in extension XFree86-VidModeExtension
[ 13.527] Initializing built-in extension XFree86-DGA
[ 13.527] Initializing built-in extension XFree86-DRI
[ 13.527] Initializing built-in extension DRI2
[ 13.527] (II) LoadModule: "glx"
[ 13.528] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.529] (II) Module glx: vendor="X.Org Foundation"
[ 13.529] compiled for 1.15.1, module version = 1.0.0
[ 13.529] ABI class: X.Org Server Extension, version 8.0
[ 13.529] (==) AIGLX enabled
[ 13.529] Loading extension GLX
[ 13.529] (==) Matched intel as autoconfigured driver 0
[ 13.529] (==) Matched nouveau as autoconfigured driver 1
[ 13.529] (==) Matched nv as autoconfigured driver 2
[ 13.529] (==) Matched intel as autoconfigured driver 3
[ 13.529] (==) Matched modesetting as autoconfigured driver 4
[ 13.529] (==) Matched fbdev as autoconfigured driver 5
[ 13.529] (==) Matched vesa as autoconfigured driver 6
[ 13.529] (==) Assigned the driver to the xf86ConfigLayout
[ 13.529] (II) LoadModule: "intel"
[ 13.529] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.532] (II) Module intel: vendor="X.Org Foundation"
[ 13.532] compiled for 1.15.0, module version = 2.21.15
[ 13.532] Module class: X.Org Video Driver
[ 13.532] ABI class: X.Org Video Driver, version 15.0
[ 13.532] (II) LoadModule: "nouveau"
[ 13.532] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 13.533] (II) Module nouveau: vendor="X.Org Foundation"
[ 13.533] compiled for 1.15.0, module version = 1.0.10
[ 13.533] Module class: X.Org Video Driver
[ 13.533] ABI class: X.Org Video Driver, version 15.0
[ 13.533] (II) LoadModule: "nv"
[ 13.533] (WW) Warning, couldn't open module nv
[ 13.533] (II) UnloadModule: "nv"
[ 13.533] (II) Unloading nv
[ 13.533] (EE) Failed to load module "nv" (module does not exist, 0)
[ 13.533] (II) LoadModule: "modesetting"
[ 13.533] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 13.534] (II) Module modesetting: vendor="X.Org Foundation"
[ 13.534] compiled for 1.15.1, module version = 0.8.1
[ 13.534] Module class: X.Org Video Driver
[ 13.534] ABI class: X.Org Video Driver, version 15.0
[ 13.534] (II) LoadModule: "fbdev"
[ 13.534] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 13.534] (II) Module fbdev: vendor="X.Org Foundation"
[ 13.534] compiled for 1.15.0, module version = 0.4.4
[ 13.534] Module class: X.Org Video Driver
[ 13.534] ABI class: X.Org Video Driver, version 15.0
[ 13.534] (II) LoadModule: "vesa"
[ 13.534] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 13.535] (II) Module vesa: vendor="X.Org Foundation"
[ 13.535] compiled for 1.15.0, module version = 2.3.3
[ 13.535] Module class: X.Org Video Driver
[ 13.535] ABI class: X.Org Video Driver, version 15.0
[ 13.535] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 13.535] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 13.535] (II) NOUVEAU driver for NVIDIA chipset families :
[ 13.535] RIVA TNT (NV04)
[ 13.535] RIVA TNT2 (NV05)
[ 13.535] GeForce 256 (NV10)
[ 13.535] GeForce 2 (NV11, NV15)
[ 13.536] GeForce 4MX (NV17, NV18)
[ 13.536] GeForce 3 (NV20)
[ 13.536] GeForce 4Ti (NV25, NV28)
[ 13.536] GeForce FX (NV3x)
[ 13.536] GeForce 6 (NV4x)
[ 13.536] GeForce 7 (G7x)
[ 13.536] GeForce 8 (G8x)
[ 13.536] GeForce GTX 200 (NVA0)
[ 13.536] GeForce GTX 400 (NVC0)
[ 13.536] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13.536] (II) FBDEV: driver for framebuffer: fbdev
[ 13.536] (II) VESA: driver for VESA chipsets: vesa
[ 13.536] (++) using VT number 7
[ 13.547] (II) [drm] nouveau interface version: 1.1.1
[ 13.547] (WW) Falling back to old probe method for modesetting
[ 13.547] (WW) Falling back to old probe method for fbdev
[ 13.547] (II) Loading sub module "fbdevhw"
[ 13.547] (II) LoadModule: "fbdevhw"
[ 13.548] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 13.548] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13.548] compiled for 1.15.1, module version = 0.0.2
[ 13.548] ABI class: X.Org Video Driver, version 15.0
[ 13.548] (WW) Falling back to old probe method for vesa
[ 13.548] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.548] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.548] (==) intel(0): RGB weight 888
[ 13.548] (==) intel(0): Default visual is TrueColor
[ 13.548] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 13.548] (**) intel(0): Relaxed fencing enabled
[ 13.548] (**) intel(0): Wait on SwapBuffers? enabled
[ 13.548] (**) intel(0): Triple buffering? enabled
[ 13.548] (**) intel(0): Framebuffer tiled
[ 13.548] (**) intel(0): Pixmaps tiled
[ 13.548] (**) intel(0): 3D buffers tiled
[ 13.548] (**) intel(0): SwapBuffers wait enabled
[ 13.548] (==) intel(0): video overlay key set to 0x101fe
[ 13.548] (II) intel(0): Output eDP1 has no monitor section
[ 13.548] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 13.580] (II) intel(0): Output VGA1 has no monitor section
[ 13.580] (II) intel(0): Output HDMI1 has no monitor section
[ 13.580] (II) intel(0): Output DP1 has no monitor section
[ 13.581] (II) intel(0): Output HDMI2 has no monitor section
[ 13.581] (II) intel(0): EDID for output eDP1
[ 13.581] (II) intel(0): Manufacturer: SHP Model: 13f8 Serial#: 0
[ 13.581] (II) intel(0): Year: 2013 Week: 34
[ 13.581] (II) intel(0): EDID Version: 1.4
[ 13.581] (II) intel(0): Digital Display Input
[ 13.581] (II) intel(0): 8 bits per channel
[ 13.581] (II) intel(0): Digital interface is DisplayPort
[ 13.581] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 13.581] (II) intel(0): Gamma: 2.20
[ 13.581] (II) intel(0): No DPMS capabilities specified
[ 13.581] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.581] (II) intel(0): Default color space is primary color space
[ 13.581] (II) intel(0): First detailed timing is preferred mode
[ 13.581] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 13.581] (II) intel(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 13.581] (II) intel(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 13.581] (II) intel(0): Manufacturer's mask: 0
[ 13.581] (II) intel(0): Supported detailed timing:
[ 13.581] (II) intel(0): clock: 373.2 MHz Image Size: 346 x 194 mm
[ 13.581] (II) intel(0): h_active: 3200 h_sync: 3248 h_sync_end 3280 h_blank_end 3360 h_border: 0
[ 13.581] (II) intel(0): v_active: 1800 v_sync: 1803 v_sync_end 1808 v_blanking: 1852 v_border: 0
[ 13.581] (II) intel(0): 6RGW0�LQ156Z1
[ 13.581] (II) intel(0): Unknown vendor-specific block 0
[ 13.581] (II) intel(0): EDID (in hex):
[ 13.581] (II) intel(0): 00ffffffffffff004d10f81300000000
[ 13.581] (II) intel(0): 22170104a52313780ede50a3544c9926
[ 13.581] (II) intel(0): 0f505400000001010101010101010101
[ 13.581] (II) intel(0): 010101010101cd9180a0c00834703020
[ 13.581] (II) intel(0): 35005ac2100000180000001000000000
[ 13.581] (II) intel(0): 00000000000000000000000000fe0036
[ 13.581] (II) intel(0): 52475730804c513135365a3100000000
[ 13.581] (II) intel(0): 0002010328001200000b010a2020001b
[ 13.581] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 13.581] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 13.581] (II) intel(0): Printing probed modes for output eDP1
[ 13.581] (II) intel(0): Modeline "3200x1800"x60.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 13.581] (II) intel(0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[ 13.581] (II) intel(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 13.581] (II) intel(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 13.581] (II) intel(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 13.581] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[ 13.581] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 13.581] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 13.581] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 13.581] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 13.581] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 13.581] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 13.581] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 13.581] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 13.581] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 13.581] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 13.581] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 13.581] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 13.581] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 13.581] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 13.581] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 13.581] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 13.612] (II) intel(0): EDID for output VGA1
[ 13.612] (II) intel(0): EDID for output HDMI1
[ 13.612] (II) intel(0): EDID for output DP1
[ 13.613] (II) intel(0): EDID for output HDMI2
[ 13.613] (II) intel(0): Output eDP1 connected
[ 13.613] (II) intel(0): Output VGA1 disconnected
[ 13.613] (II) intel(0): Output HDMI1 disconnected
[ 13.613] (II) intel(0): Output DP1 disconnected
[ 13.613] (II) intel(0): Output HDMI2 disconnected
[ 13.613] (II) intel(0): Using exact sizes for initial modes
[ 13.613] (II) intel(0): Output eDP1 using initial mode 3200x1800
[ 13.613] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.613] (II) intel(0): Kernel page flipping support detected, enabling
[ 13.613] (==) intel(0): DPI set to (96, 96)
[ 13.613] (II) Loading sub module "fb"
[ 13.613] (II) LoadModule: "fb"
[ 13.613] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.614] (II) Module fb: vendor="X.Org Foundation"
[ 13.614] compiled for 1.15.1, module version = 1.0.0
[ 13.614] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.614] (II) Loading sub module "dri2"
[ 13.614] (II) LoadModule: "dri2"
[ 13.614] (II) Module "dri2" already built-in
[ 13.614] (II) Loading sub module "dri2"
[ 13.614] (II) LoadModule: "dri2"
[ 13.614] (II) Module "dri2" already built-in
[ 13.614] (--) NOUVEAU(G0): Chipset: "NVIDIA NVE7"
[ 13.614] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 13.614] (==) NOUVEAU(G0): RGB weight 888
[ 13.614] (==) NOUVEAU(G0): Default visual is TrueColor
[ 13.614] (==) NOUVEAU(G0): Using HW cursor
[ 13.614] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 13.614] (==) NOUVEAU(G0): Page flipping enabled
[ 13.614] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 13.614] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.614] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 13.614] (**) NOUVEAU(G0): Mode "3200x1800": 492.0 MHz (scaled from 0.0 MHz), 111.8 kHz, 60.0 Hz
[ 13.614] (II) NOUVEAU(G0): Modeline "3200x1800"x60.0 492.00 3200 3456 3800 4400 1800 1803 1808 1865 -hsync +vsync (111.8 kHz)
[ 13.614] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 13.614] (II) Loading sub module "fb"
[ 13.614] (II) LoadModule: "fb"
[ 13.614] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.614] (II) Module fb: vendor="X.Org Foundation"
[ 13.614] compiled for 1.15.1, module version = 1.0.0
[ 13.614] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.614] (II) Loading sub module "exa"
[ 13.614] (II) LoadModule: "exa"
[ 13.614] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 13.614] (II) Module exa: vendor="X.Org Foundation"
[ 13.615] compiled for 1.15.1, module version = 2.6.0
[ 13.615] ABI class: X.Org Video Driver, version 15.0
[ 13.615] (II) Loading sub module "shadowfb"
[ 13.615] (II) LoadModule: "shadowfb"
[ 13.615] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 13.615] (II) Module shadowfb: vendor="X.Org Foundation"
[ 13.615] compiled for 1.15.1, module version = 1.0.0
[ 13.615] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.615] (II) UnloadModule: "modesetting"
[ 13.615] (II) Unloading modesetting
[ 13.615] (II) UnloadModule: "fbdev"
[ 13.615] (II) Unloading fbdev
[ 13.615] (II) UnloadSubModule: "fbdevhw"
[ 13.615] (II) Unloading fbdevhw
[ 13.615] (II) UnloadModule: "vesa"
[ 13.615] (II) Unloading vesa
[ 13.615] (==) Depth 24 pixmap format is 32 bpp
[ 13.625] (II) NOUVEAU(G0): Opened GPU channel 0
[ 15.626] (EE) NOUVEAU(G0): Failed to initialise context object: 2D_NVC0 (0)
[ 15.626] (EE) NOUVEAU(G0): Error initialising acceleration. Falling back to NoAccel
[ 15.627] (==) NOUVEAU(G0): Backing store enabled
[ 15.627] (==) NOUVEAU(G0): Silken mouse enabled
[ 15.627] (==) NOUVEAU(G0): DPMS enabled
[ 15.627] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.628] (II) intel(0): [DRI2] Setup complete
[ 15.628] (II) intel(0): [DRI2] DRI driver: i965
[ 15.628] (II) intel(0): Allocated new frame buffer 3200x1800 stride 12800, tiled
[ 15.628] (II) UXA(0): Driver registered support for the following operations:
[ 15.628] (II) solid
[ 15.628] (II) copy
[ 15.628] (II) composite (RENDER acceleration)
[ 15.628] (II) put_image
[ 15.628] (II) get_image
[ 15.628] (==) intel(0): Backing store enabled
[ 15.628] (==) intel(0): Silken mouse enabled
[ 15.628] (II) intel(0): Initializing HW Cursor
[ 15.628] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.629] (==) intel(0): DPMS enabled
[ 15.629] (==) intel(0): Intel XvMC decoder enabled
[ 15.629] (II) intel(0): Set up textured video
[ 15.629] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 15.629] (II) intel(0): direct rendering: DRI2 Enabled
[ 15.629] (==) intel(0): hotplug detection: "enabled"
[ 15.660] (--) RandR disabled
[ 15.671] (II) SELinux: Disabled on system
[ 15.705] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.705] (II) AIGLX: enabled GLX_ARB_create_context
[ 15.705] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 15.705] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 15.705] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15.705] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15.705] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 15.705] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 15.705] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15.705] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 15.705] (II) AIGLX: Loaded and initialized i965
[ 15.705] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.708] (II) NOUVEAU(G0): NVEnterVT is called.
[ 15.709] (II) intel(0): Setting screen physical size to 846 x 476
[ 15.782] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 15.782] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.782] (II) LoadModule: "evdev"
[ 15.782] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.783] (II) Module evdev: vendor="X.Org Foundation"
[ 15.783] compiled for 1.15.0, module version = 2.8.2
[ 15.783] Module class: X.Org XInput Driver
[ 15.783] ABI class: X.Org XInput driver, version 20.0
[ 15.783] (II) Using input driver 'evdev' for 'Power Button'
[ 15.783] (**) Power Button: always reports core events
[ 15.783] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 15.783] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.783] (--) evdev: Power Button: Found keys
[ 15.783] (II) evdev: Power Button: Configuring as keyboard
[ 15.783] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 15.783] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.783] (**) Option "xkb_rules" "evdev"
[ 15.783] (**) Option "xkb_model" "pc105"
[ 15.783] (**) Option "xkb_layout" "it"
[ 15.817] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 15.817] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15.817] (II) Using input driver 'evdev' for 'Video Bus'
[ 15.817] (**) Video Bus: always reports core events
[ 15.817] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 15.817] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15.817] (--) evdev: Video Bus: Found keys
[ 15.817] (II) evdev: Video Bus: Configuring as keyboard
[ 15.817] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16/event13"
[ 15.817] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 15.817] (**) Option "xkb_rules" "evdev"
[ 15.817] (**) Option "xkb_model" "pc105"
[ 15.817] (**) Option "xkb_layout" "it"
[ 15.818] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 15.818] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15.818] (II) Using input driver 'evdev' for 'Video Bus'
[ 15.818] (**) Video Bus: always reports core events
[ 15.818] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 15.818] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15.818] (--) evdev: Video Bus: Found keys
[ 15.818] (II) evdev: Video Bus: Configuring as keyboard
[ 15.818] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4e/LNXVIDEO:00/input/input15/event12"
[ 15.818] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 15.818] (**) Option "xkb_rules" "evdev"
[ 15.818] (**) Option "xkb_model" "pc105"
[ 15.818] (**) Option "xkb_layout" "it"
[ 15.819] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 15.819] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.819] (II) Using input driver 'evdev' for 'Power Button'
[ 15.819] (**) Power Button: always reports core events
[ 15.819] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 15.819] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.819] (--) evdev: Power Button: Found keys
[ 15.819] (II) evdev: Power Button: Configuring as keyboard
[ 15.819] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 15.819] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 15.819] (**) Option "xkb_rules" "evdev"
[ 15.819] (**) Option "xkb_model" "pc105"
[ 15.819] (**) Option "xkb_layout" "it"
[ 15.820] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 15.820] (II) No input driver specified, ignoring this device.
[ 15.820] (II) This device may have been added with another device file.
[ 15.820] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 15.820] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 15.821] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[ 15.821] (II) No input driver specified, ignoring this device.
[ 15.821] (II) This device may have been added with another device file.
[ 15.821] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[ 15.821] (II) No input driver specified, ignoring this device.
[ 15.821] (II) This device may have been added with another device file.
[ 15.821] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 15.821] (II) No input driver specified, ignoring this device.
[ 15.821] (II) This device may have been added with another device file.
[ 15.822] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event8)
[ 15.822] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 15.822] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 15.822] (**) Integrated_Webcam_HD: always reports core events
[ 15.822] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event8"
[ 15.822] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x573c
[ 15.822] (--) evdev: Integrated_Webcam_HD: Found keys
[ 15.822] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 15.822] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input10/event8"
[ 15.822] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[ 15.822] (**) Option "xkb_rules" "evdev"
[ 15.822] (**) Option "xkb_model" "pc105"
[ 15.822] (**) Option "xkb_layout" "it"
[ 15.823] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[ 15.823] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 15.823] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 15.823] (**) Logitech USB Receiver: always reports core events
[ 15.823] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event9"
[ 15.823] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc518
[ 15.823] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 15.823] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 15.823] (--) evdev: Logitech USB Receiver: Found relative axes
[ 15.823] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 15.823] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 15.823] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 15.823] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 15.823] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.823] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C518.0001/input/input11/event9"
[ 15.823] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 15.823] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 15.824] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 15.824] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 15.824] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 15.824] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 15.824] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 15.824] (II) No input driver specified, ignoring this device.
[ 15.824] (II) This device may have been added with another device file.
[ 15.825] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 15.825] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 15.825] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 15.825] (**) Logitech USB Receiver: always reports core events
[ 15.825] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event11"
[ 15.825] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc518
[ 15.825] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 15.825] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 15.825] (--) evdev: Logitech USB Receiver: Found relative axes
[ 15.825] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 15.825] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 15.825] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 15.825] (--) evdev: Logitech USB Receiver: Found keys
[ 15.825] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 15.825] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 15.825] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 15.825] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 15.825] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.825] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C518.0002/input/input14/event11"
[ 15.825] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 15.825] (**) Option "xkb_rules" "evdev"
[ 15.825] (**) Option "xkb_model" "pc105"
[ 15.825] (**) Option "xkb_layout" "it"
[ 15.826] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 15.826] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 15.826] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 15.826] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 15.826] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 15.826] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 15.826] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/event10)
[ 15.826] (**) SYNAPTICS Synaptics Large Touch Screen: Applying InputClass "evdev touchscreen catchall"
[ 15.826] (II) Using input driver 'evdev' for 'SYNAPTICS Synaptics Large Touch Screen'
[ 15.826] (**) SYNAPTICS Synaptics Large Touch Screen: always reports core events
[ 15.826] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: Device: "/dev/input/event10"
[ 15.827] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Using mtdev for this device
[ 15.827] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Vendor 0x6cb Product 0xac3
[ 15.827] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute axes
[ 15.827] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute multitouch axes
[ 15.827] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: No buttons found, faking one.
[ 15.827] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found x and y absolute axes
[ 15.827] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute touchscreen
[ 15.827] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Configuring as touchscreen
[ 15.827] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: YAxisMapping: buttons 4 and 5
[ 15.827] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.827] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0003/input/input12/event10"
[ 15.827] (II) XINPUT: Adding extended input device "SYNAPTICS Synaptics Large Touch Screen" (type: TOUCHSCREEN, id 13)
[ 15.827] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: initialized for absolute axes.
[ 15.827] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) keeping acceleration scheme 1
[ 15.827] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration profile 0
[ 15.827] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration factor: 2.000
[ 15.827] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration threshold: 4
[ 15.828] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/mouse1)
[ 15.828] (II) No input driver specified, ignoring this device.
[ 15.828] (II) This device may have been added with another device file.
[ 15.828] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 15.828] (II) No input driver specified, ignoring this device.
[ 15.828] (II) This device may have been added with another device file.
[ 15.828] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 15.828] (II) No input driver specified, ignoring this device.
[ 15.828] (II) This device may have been added with another device file.
[ 15.829] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 15.829] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.829] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 15.829] (**) AT Translated Set 2 keyboard: always reports core events
[ 15.829] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 15.829] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 15.829] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 15.829] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 15.829] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 15.829] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 15.829] (**) Option "xkb_rules" "evdev"
[ 15.829] (**) Option "xkb_model" "pc105"
[ 15.829] (**) Option "xkb_layout" "it"
[ 15.829] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 15.829] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 15.829] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 15.829] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 15.830] (II) LoadModule: "synaptics"
[ 15.830] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 15.830] (II) Module synaptics: vendor="X.Org Foundation"
[ 15.830] compiled for 1.15.0, module version = 1.7.3
[ 15.830] Module class: X.Org XInput Driver
[ 15.830] ABI class: X.Org XInput driver, version 20.0
[ 15.830] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 15.830] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15.830] (**) Option "Device" "/dev/input/event17"
[ 16.044] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 16.044] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5660 (res 42)
[ 16.044] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4646 (res 44)
[ 16.044] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 16.044] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 16.044] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 16.044] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 16.044] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 16.044] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.044] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.104] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event17"
[ 16.104] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 16.104] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 16.104] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 16.104] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 16.104] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 16.104] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 16.104] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 16.104] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 16.105] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.105] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 16.105] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 16.105] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 16.106] (II) No input driver specified, ignoring this device.
[ 16.106] (II) This device may have been added with another device file.
[ 16.106] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event18)
[ 16.106] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 16.106] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 16.106] (**) ACPI Virtual Keyboard Device: always reports core events
[ 16.106] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event18"
[ 16.106] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 16.106] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 16.106] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 16.106] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event18"
[ 16.107] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 16)
[ 16.107] (**) Option "xkb_rules" "evdev"
[ 16.107] (**) Option "xkb_model" "pc105"
[ 16.107] (**) Option "xkb_layout" "it"
[ 16.107] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 16.107] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 16.107] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 16.107] (**) Dell WMI hotkeys: always reports core events
[ 16.107] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
[ 16.108] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 16.108] (--) evdev: Dell WMI hotkeys: Found keys
[ 16.108] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 16.108] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event7"
[ 16.108] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[ 16.108] (**) Option "xkb_rules" "evdev"
[ 16.108] (**) Option "xkb_model" "pc105"
[ 16.108] (**) Option "xkb_layout" "it"
[ 16.113] (II) config/udev: removing device ACPI Virtual Keyboard Device
[ 16.172] (II) evdev: ACPI Virtual Keyboard Device: Close
[ 16.172] (II) UnloadModule: "evdev"
[ 16.172] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event18)
[ 16.172] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 16.172] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 16.172] (**) ACPI Virtual Keyboard Device: always reports core events
[ 16.172] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event18"
[ 16.172] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 16.172] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 16.172] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 16.173] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event18"
[ 16.173] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 16)
[ 16.173] (**) Option "xkb_rules" "evdev"
[ 16.173] (**) Option "xkb_model" "pc105"
[ 16.173] (**) Option "xkb_layout" "it"
[ 16.173] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/drm/card1 /dev/dri/card1
[ 16.173] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/drm/card1
[ 16.174] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 16.177] (II) NOUVEAU(G0): Closed GPU channel 0
[ 16.178] (II) UnloadModule: "nouveau"
[ 16.178] (II) UnloadSubModule: "shadowfb"
[ 16.178] (II) Unloading shadowfb
[ 16.178] (II) UnloadSubModule: "exa"
[ 16.178] (II) Unloading exa
[ 16.178] (II) UnloadSubModule: "fb"
[ 16.178] (II) Unloading fb
[ 16.178] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 16.178] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 16.178] (II) LoadModule: "modesetting"
[ 16.178] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 16.179] (II) Module modesetting: vendor="X.Org Foundation"
[ 16.179] compiled for 1.15.1, module version = 0.8.1
[ 16.179] Module class: X.Org Video Driver
[ 16.179] ABI class: X.Org Video Driver, version 15.0
[ 16.179] xf86: found device 1
[ 16.752] (II) intel(0): EDID vendor "SHP", prod id 5112
[ 16.753] (II) intel(0): Printing DDC gathered Modelines:
[ 16.753] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 17.369] (II) intel(0): EDID vendor "SHP", prod id 5112
[ 17.369] (II) intel(0): Printing DDC gathered Modelines:
[ 17.369] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 17.480] (II) intel(0): EDID vendor "SHP", prod id 5112
[ 17.480] (II) intel(0): Printing DDC gathered Modelines:
[ 17.480] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 22.956] (II) AIGLX: Suspending AIGLX clients for VT switch
*** Xorg.1.log
[ 508.765]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 508.765] X Protocol Version 11, Revision 0
[ 508.765] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[ 508.765] Current Operating System: Linux chewbaccaXpsTux 3.14-1-amd64 #1 SMP Debian 3.14.4-1 (2014-05-13) x86_64
[ 508.765] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=1f853ecb-24ec-400b-a9bf-527f34677523 ro quiet
[ 508.765] Build Date: 15 April 2014 06:58:36PM
[ 508.765] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[ 508.765] Current version of pixman: 0.32.4
[ 508.765] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 508.765] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 508.766] (==) Log file: "/var/log/Xorg.1.log", Time: Tue Jun 3 21:31:07 2014
[ 508.766] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 508.766] (==) No Layout section. Using the first Screen section.
[ 508.766] (==) No screen section available. Using defaults.
[ 508.766] (**) |-->Screen "Default Screen Section" (0)
[ 508.766] (**) | |-->Monitor "<default monitor>"
[ 508.767] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 508.767] (==) Automatically adding devices
[ 508.767] (==) Automatically enabling devices
[ 508.767] (==) Automatically adding GPU devices
[ 508.767] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 508.767] Entry deleted from font path.
[ 508.767] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 508.767] Entry deleted from font path.
[ 508.767] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 508.767] Entry deleted from font path.
[ 508.767] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 508.767] Entry deleted from font path.
[ 508.767] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 508.767] Entry deleted from font path.
[ 508.767] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 508.767] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 508.767] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 508.767] (II) Loader magic: 0x7f22f13edd40
[ 508.767] (II) Module ABI versions:
[ 508.767] X.Org ANSI C Emulation: 0.4
[ 508.767] X.Org Video Driver: 15.0
[ 508.767] X.Org XInput driver : 20.0
[ 508.767] X.Org Server Extension : 8.0
[ 508.767] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 509.577] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 509.578] (--) PCI:*(0:0:2:0) 8086:0416:1028:05fe rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 509.578] (--) PCI: (0:2:0:0) 10de:0fe4:1028:05fe rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 509.578] Initializing built-in extension Generic Event Extension
[ 509.578] Initializing built-in extension SHAPE
[ 509.578] Initializing built-in extension MIT-SHM
[ 509.578] Initializing built-in extension XInputExtension
[ 509.578] Initializing built-in extension XTEST
[ 509.578] Initializing built-in extension BIG-REQUESTS
[ 509.578] Initializing built-in extension SYNC
[ 509.578] Initializing built-in extension XKEYBOARD
[ 509.578] Initializing built-in extension XC-MISC
[ 509.578] Initializing built-in extension SECURITY
[ 509.578] Initializing built-in extension XINERAMA
[ 509.578] Initializing built-in extension XFIXES
[ 509.578] Initializing built-in extension RENDER
[ 509.578] Initializing built-in extension RANDR
[ 509.578] Initializing built-in extension COMPOSITE
[ 509.578] Initializing built-in extension DAMAGE
[ 509.578] Initializing built-in extension MIT-SCREEN-SAVER
[ 509.578] Initializing built-in extension DOUBLE-BUFFER
[ 509.578] Initializing built-in extension RECORD
[ 509.578] Initializing built-in extension DPMS
[ 509.578] Initializing built-in extension Present
[ 509.578] Initializing built-in extension DRI3
[ 509.578] Initializing built-in extension X-Resource
[ 509.578] Initializing built-in extension XVideo
[ 509.578] Initializing built-in extension XVideo-MotionCompensation
[ 509.578] Initializing built-in extension SELinux
[ 509.578] Initializing built-in extension XFree86-VidModeExtension
[ 509.578] Initializing built-in extension XFree86-DGA
[ 509.578] Initializing built-in extension XFree86-DRI
[ 509.578] Initializing built-in extension DRI2
[ 509.578] (II) LoadModule: "glx"
[ 509.578] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 509.579] (II) Module glx: vendor="X.Org Foundation"
[ 509.579] compiled for 1.15.1, module version = 1.0.0
[ 509.579] ABI class: X.Org Server Extension, version 8.0
[ 509.579] (==) AIGLX enabled
[ 509.579] Loading extension GLX
[ 509.579] (==) Matched intel as autoconfigured driver 0
[ 509.579] (==) Matched nouveau as autoconfigured driver 1
[ 509.579] (==) Matched nv as autoconfigured driver 2
[ 509.579] (==) Matched intel as autoconfigured driver 3
[ 509.579] (==) Matched modesetting as autoconfigured driver 4
[ 509.579] (==) Matched fbdev as autoconfigured driver 5
[ 509.579] (==) Matched vesa as autoconfigured driver 6
[ 509.579] (==) Assigned the driver to the xf86ConfigLayout
[ 509.579] (II) LoadModule: "intel"
[ 509.579] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 509.579] (II) Module intel: vendor="X.Org Foundation"
[ 509.579] compiled for 1.15.0, module version = 2.21.15
[ 509.579] Module class: X.Org Video Driver
[ 509.579] ABI class: X.Org Video Driver, version 15.0
[ 509.579] (II) LoadModule: "nouveau"
[ 509.579] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 509.579] (II) Module nouveau: vendor="X.Org Foundation"
[ 509.579] compiled for 1.15.0, module version = 1.0.10
[ 509.579] Module class: X.Org Video Driver
[ 509.579] ABI class: X.Org Video Driver, version 15.0
[ 509.579] (II) LoadModule: "nv"
[ 509.579] (WW) Warning, couldn't open module nv
[ 509.579] (II) UnloadModule: "nv"
[ 509.579] (II) Unloading nv
[ 509.579] (EE) Failed to load module "nv" (module does not exist, 0)
[ 509.579] (II) LoadModule: "modesetting"
[ 509.579] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 509.579] (II) Module modesetting: vendor="X.Org Foundation"
[ 509.579] compiled for 1.15.1, module version = 0.8.1
[ 509.579] Module class: X.Org Video Driver
[ 509.579] ABI class: X.Org Video Driver, version 15.0
[ 509.579] (II) LoadModule: "fbdev"
[ 509.579] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 509.579] (II) Module fbdev: vendor="X.Org Foundation"
[ 509.579] compiled for 1.15.0, module version = 0.4.4
[ 509.579] Module class: X.Org Video Driver
[ 509.579] ABI class: X.Org Video Driver, version 15.0
[ 509.579] (II) LoadModule: "vesa"
[ 509.579] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 509.579] (II) Module vesa: vendor="X.Org Foundation"
[ 509.579] compiled for 1.15.0, module version = 2.3.3
[ 509.579] Module class: X.Org Video Driver
[ 509.580] ABI class: X.Org Video Driver, version 15.0
[ 509.580] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 509.580] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 509.580] (II) NOUVEAU driver for NVIDIA chipset families :
[ 509.580] RIVA TNT (NV04)
[ 509.580] RIVA TNT2 (NV05)
[ 509.580] GeForce 256 (NV10)
[ 509.580] GeForce 2 (NV11, NV15)
[ 509.580] GeForce 4MX (NV17, NV18)
[ 509.580] GeForce 3 (NV20)
[ 509.580] GeForce 4Ti (NV25, NV28)
[ 509.580] GeForce FX (NV3x)
[ 509.580] GeForce 6 (NV4x)
[ 509.580] GeForce 7 (G7x)
[ 509.580] GeForce 8 (G8x)
[ 509.580] GeForce GTX 200 (NVA0)
[ 509.580] GeForce GTX 400 (NVC0)
[ 509.580] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 509.580] (II) FBDEV: driver for framebuffer: fbdev
[ 509.580] (II) VESA: driver for VESA chipsets: vesa
[ 509.580] (++) using VT number 7
[ 509.581] (II) [drm] nouveau interface version: 1.1.1
[ 509.581] (WW) Falling back to old probe method for modesetting
[ 509.581] (WW) Falling back to old probe method for fbdev
[ 509.581] (II) Loading sub module "fbdevhw"
[ 509.581] (II) LoadModule: "fbdevhw"
[ 509.581] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 509.581] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 509.581] compiled for 1.15.1, module version = 0.0.2
[ 509.581] ABI class: X.Org Video Driver, version 15.0
[ 509.581] (WW) Falling back to old probe method for vesa
[ 509.581] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 509.581] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 509.581] (==) intel(0): RGB weight 888
[ 509.581] (==) intel(0): Default visual is TrueColor
[ 509.581] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 509.581] (**) intel(0): Relaxed fencing enabled
[ 509.581] (**) intel(0): Wait on SwapBuffers? enabled
[ 509.581] (**) intel(0): Triple buffering? enabled
[ 509.581] (**) intel(0): Framebuffer tiled
[ 509.581] (**) intel(0): Pixmaps tiled
[ 509.581] (**) intel(0): 3D buffers tiled
[ 509.581] (**) intel(0): SwapBuffers wait enabled
[ 509.581] (==) intel(0): video overlay key set to 0x101fe
[ 509.581] (II) intel(0): Output eDP1 has no monitor section
[ 509.581] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 509.612] (II) intel(0): Output VGA1 has no monitor section
[ 509.612] (II) intel(0): Output HDMI1 has no monitor section
[ 509.612] (II) intel(0): Output DP1 has no monitor section
[ 509.612] (II) intel(0): Output HDMI2 has no monitor section
[ 509.612] (II) intel(0): EDID for output eDP1
[ 509.612] (II) intel(0): Manufacturer: SHP Model: 13f8 Serial#: 0
[ 509.612] (II) intel(0): Year: 2013 Week: 34
[ 509.612] (II) intel(0): EDID Version: 1.4
[ 509.612] (II) intel(0): Digital Display Input
[ 509.612] (II) intel(0): 8 bits per channel
[ 509.612] (II) intel(0): Digital interface is DisplayPort
[ 509.612] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 509.613] (II) intel(0): Gamma: 2.20
[ 509.613] (II) intel(0): No DPMS capabilities specified
[ 509.613] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 509.613] (II) intel(0): Default color space is primary color space
[ 509.613] (II) intel(0): First detailed timing is preferred mode
[ 509.613] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 509.613] (II) intel(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 509.613] (II) intel(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328
[ 509.613] (II) intel(0): Manufacturer's mask: 0
[ 509.613] (II) intel(0): Supported detailed timing:
[ 509.613] (II) intel(0): clock: 373.2 MHz Image Size: 346 x 194 mm
[ 509.613] (II) intel(0): h_active: 3200 h_sync: 3248 h_sync_end 3280 h_blank_end 3360 h_border: 0
[ 509.613] (II) intel(0): v_active: 1800 v_sync: 1803 v_sync_end 1808 v_blanking: 1852 v_border: 0
[ 509.613] (II) intel(0): 6RGW0�LQ156Z1
[ 509.613] (II) intel(0): Unknown vendor-specific block 0
[ 509.613] (II) intel(0): EDID (in hex):
[ 509.613] (II) intel(0): 00ffffffffffff004d10f81300000000
[ 509.613] (II) intel(0): 22170104a52313780ede50a3544c9926
[ 509.613] (II) intel(0): 0f505400000001010101010101010101
[ 509.613] (II) intel(0): 010101010101cd9180a0c00834703020
[ 509.613] (II) intel(0): 35005ac2100000180000001000000000
[ 509.613] (II) intel(0): 00000000000000000000000000fe0036
[ 509.613] (II) intel(0): 52475730804c513135365a3100000000
[ 509.613] (II) intel(0): 0002010328001200000b010a2020001b
[ 509.613] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 509.613] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 509.613] (II) intel(0): Printing probed modes for output eDP1
[ 509.613] (II) intel(0): Modeline "3200x1800"x60.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 509.613] (II) intel(0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[ 509.613] (II) intel(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 509.613] (II) intel(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 509.613] (II) intel(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 509.613] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[ 509.613] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 509.613] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 509.613] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 509.613] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 509.613] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 509.613] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 509.613] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 509.613] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 509.613] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 509.613] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 509.613] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 509.613] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 509.613] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 509.613] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 509.613] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 509.613] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 509.644] (II) intel(0): EDID for output VGA1
[ 509.644] (II) intel(0): EDID for output HDMI1
[ 509.644] (II) intel(0): EDID for output DP1
[ 509.644] (II) intel(0): EDID for output HDMI2
[ 509.644] (II) intel(0): Output eDP1 connected
[ 509.644] (II) intel(0): Output VGA1 disconnected
[ 509.644] (II) intel(0): Output HDMI1 disconnected
[ 509.644] (II) intel(0): Output DP1 disconnected
[ 509.644] (II) intel(0): Output HDMI2 disconnected
[ 509.644] (II) intel(0): Using exact sizes for initial modes
[ 509.644] (II) intel(0): Output eDP1 using initial mode 3200x1800
[ 509.644] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 509.644] (II) intel(0): Kernel page flipping support detected, enabling
[ 509.644] (==) intel(0): DPI set to (96, 96)
[ 509.644] (II) Loading sub module "fb"
[ 509.644] (II) LoadModule: "fb"
[ 509.645] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 509.645] (II) Module fb: vendor="X.Org Foundation"
[ 509.645] compiled for 1.15.1, module version = 1.0.0
[ 509.645] ABI class: X.Org ANSI C Emulation, version 0.4
[ 509.645] (II) Loading sub module "dri2"
[ 509.645] (II) LoadModule: "dri2"
[ 509.645] (II) Module "dri2" already built-in
[ 509.645] (II) Loading sub module "dri2"
[ 509.645] (II) LoadModule: "dri2"
[ 509.645] (II) Module "dri2" already built-in
[ 509.645] (--) NOUVEAU(G0): Chipset: "NVIDIA NVE7"
[ 509.645] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 509.645] (==) NOUVEAU(G0): RGB weight 888
[ 509.645] (==) NOUVEAU(G0): Default visual is TrueColor
[ 509.645] (==) NOUVEAU(G0): Using HW cursor
[ 509.645] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 509.645] (==) NOUVEAU(G0): Page flipping enabled
[ 509.645] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 509.645] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 509.645] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 509.645] (**) NOUVEAU(G0): Mode "3200x1800": 492.0 MHz (scaled from 0.0 MHz), 111.8 kHz, 60.0 Hz
[ 509.645] (II) NOUVEAU(G0): Modeline "3200x1800"x60.0 492.00 3200 3456 3800 4400 1800 1803 1808 1865 -hsync +vsync (111.8 kHz)
[ 509.645] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 509.645] (II) Loading sub module "fb"
[ 509.645] (II) LoadModule: "fb"
[ 509.645] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 509.645] (II) Module fb: vendor="X.Org Foundation"
[ 509.645] compiled for 1.15.1, module version = 1.0.0
[ 509.645] ABI class: X.Org ANSI C Emulation, version 0.4
[ 509.645] (II) Loading sub module "exa"
[ 509.645] (II) LoadModule: "exa"
[ 509.645] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 509.645] (II) Module exa: vendor="X.Org Foundation"
[ 509.645] compiled for 1.15.1, module version = 2.6.0
[ 509.645] ABI class: X.Org Video Driver, version 15.0
[ 509.645] (II) Loading sub module "shadowfb"
[ 509.645] (II) LoadModule: "shadowfb"
[ 509.645] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 509.645] (II) Module shadowfb: vendor="X.Org Foundation"
[ 509.645] compiled for 1.15.1, module version = 1.0.0
[ 509.645] ABI class: X.Org ANSI C Emulation, version 0.4
[ 509.645] (II) UnloadModule: "modesetting"
[ 509.645] (II) Unloading modesetting
[ 509.645] (II) UnloadModule: "fbdev"
[ 509.645] (II) Unloading fbdev
[ 509.645] (II) UnloadSubModule: "fbdevhw"
[ 509.645] (II) Unloading fbdevhw
[ 509.645] (II) UnloadModule: "vesa"
[ 509.645] (II) Unloading vesa
[ 509.645] (==) Depth 24 pixmap format is 32 bpp
[ 509.653] (II) NOUVEAU(G0): Opened GPU channel 0
[ 511.665] (EE) NOUVEAU(G0): Failed to initialise context object: 2D_NVC0 (0)
[ 511.665] (EE) NOUVEAU(G0): Error initialising acceleration. Falling back to NoAccel
[ 511.665] (==) NOUVEAU(G0): Backing store enabled
[ 511.665] (==) NOUVEAU(G0): Silken mouse enabled
[ 511.666] (==) NOUVEAU(G0): DPMS enabled
[ 511.666] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 511.666] (II) intel(0): [DRI2] Setup complete
[ 511.666] (II) intel(0): [DRI2] DRI driver: i965
[ 511.666] (II) intel(0): Allocated new frame buffer 3200x1800 stride 12800, tiled
[ 511.666] (II) UXA(0): Driver registered support for the following operations:
[ 511.666] (II) solid
[ 511.666] (II) copy
[ 511.666] (II) composite (RENDER acceleration)
[ 511.666] (II) put_image
[ 511.666] (II) get_image
[ 511.666] (==) intel(0): Backing store enabled
[ 511.666] (==) intel(0): Silken mouse enabled
[ 511.666] (II) intel(0): Initializing HW Cursor
[ 511.666] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 511.666] (==) intel(0): DPMS enabled
[ 511.666] (==) intel(0): Intel XvMC decoder enabled
[ 511.666] (II) intel(0): Set up textured video
[ 511.666] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 511.666] (II) intel(0): direct rendering: DRI2 Enabled
[ 511.666] (==) intel(0): hotplug detection: "enabled"
[ 511.692] (--) RandR disabled
[ 511.695] (II) SELinux: Disabled on system
[ 511.698] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 511.698] (II) AIGLX: enabled GLX_ARB_create_context
[ 511.698] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 511.698] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 511.698] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 511.698] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 511.698] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 511.698] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 511.698] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 511.698] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 511.698] (II) AIGLX: Loaded and initialized i965
[ 511.698] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 511.699] (II) NOUVEAU(G0): NVEnterVT is called.
[ 511.699] (II) intel(0): Setting screen physical size to 846 x 476
[ 511.715] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 511.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 511.715] (II) LoadModule: "evdev"
[ 511.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 511.716] (II) Module evdev: vendor="X.Org Foundation"
[ 511.716] compiled for 1.15.0, module version = 2.8.2
[ 511.716] Module class: X.Org XInput Driver
[ 511.716] ABI class: X.Org XInput driver, version 20.0
[ 511.716] (II) Using input driver 'evdev' for 'Power Button'
[ 511.716] (**) Power Button: always reports core events
[ 511.716] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 511.716] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 511.716] (--) evdev: Power Button: Found keys
[ 511.716] (II) evdev: Power Button: Configuring as keyboard
[ 511.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 511.716] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 511.716] (**) Option "xkb_rules" "evdev"
[ 511.716] (**) Option "xkb_model" "pc105"
[ 511.716] (**) Option "xkb_layout" "it"
[ 511.726] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 511.726] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 511.726] (II) Using input driver 'evdev' for 'Video Bus'
[ 511.726] (**) Video Bus: always reports core events
[ 511.726] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 511.726] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 511.726] (--) evdev: Video Bus: Found keys
[ 511.726] (II) evdev: Video Bus: Configuring as keyboard
[ 511.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14/event11"
[ 511.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 511.726] (**) Option "xkb_rules" "evdev"
[ 511.726] (**) Option "xkb_model" "pc105"
[ 511.726] (**) Option "xkb_layout" "it"
[ 511.726] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 511.726] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 511.726] (II) Using input driver 'evdev' for 'Video Bus'
[ 511.726] (**) Video Bus: always reports core events
[ 511.726] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 511.726] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 511.726] (--) evdev: Video Bus: Found keys
[ 511.726] (II) evdev: Video Bus: Configuring as keyboard
[ 511.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4e/LNXVIDEO:00/input/input13/event10"
[ 511.726] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 511.726] (**) Option "xkb_rules" "evdev"
[ 511.726] (**) Option "xkb_model" "pc105"
[ 511.726] (**) Option "xkb_layout" "it"
[ 511.726] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 511.726] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 511.726] (II) Using input driver 'evdev' for 'Power Button'
[ 511.726] (**) Power Button: always reports core events
[ 511.726] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 511.726] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 511.726] (--) evdev: Power Button: Found keys
[ 511.726] (II) evdev: Power Button: Configuring as keyboard
[ 511.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 511.726] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 511.726] (**) Option "xkb_rules" "evdev"
[ 511.726] (**) Option "xkb_model" "pc105"
[ 511.727] (**) Option "xkb_layout" "it"
[ 511.727] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 511.727] (II) No input driver specified, ignoring this device.
[ 511.727] (II) This device may have been added with another device file.
[ 511.727] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 511.727] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 511.727] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[ 511.727] (II) No input driver specified, ignoring this device.
[ 511.727] (II) This device may have been added with another device file.
[ 511.727] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 511.727] (II) No input driver specified, ignoring this device.
[ 511.727] (II) This device may have been added with another device file.
[ 511.727] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event13)
[ 511.727] (II) No input driver specified, ignoring this device.
[ 511.727] (II) This device may have been added with another device file.
[ 511.727] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event9)
[ 511.727] (**) Integrated_Webcam_HD: Applying InputClass "evdev keyboard catchall"
[ 511.727] (II) Using input driver 'evdev' for 'Integrated_Webcam_HD'
[ 511.727] (**) Integrated_Webcam_HD: always reports core events
[ 511.727] (**) evdev: Integrated_Webcam_HD: Device: "/dev/input/event9"
[ 511.727] (--) evdev: Integrated_Webcam_HD: Vendor 0xbda Product 0x573c
[ 511.727] (--) evdev: Integrated_Webcam_HD: Found keys
[ 511.727] (II) evdev: Integrated_Webcam_HD: Configuring as keyboard
[ 511.727] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input12/event9"
[ 511.727] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[ 511.727] (**) Option "xkb_rules" "evdev"
[ 511.727] (**) Option "xkb_model" "pc105"
[ 511.727] (**) Option "xkb_layout" "it"
[ 511.728] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 511.728] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 511.728] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 511.728] (**) Logitech USB Receiver: always reports core events
[ 511.728] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 511.728] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc518
[ 511.728] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 511.728] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 511.728] (--) evdev: Logitech USB Receiver: Found relative axes
[ 511.728] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 511.728] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 511.728] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 511.728] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 511.728] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 511.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C518.0001/input/input8/event6"
[ 511.728] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 511.728] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 511.728] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 511.728] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 511.728] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 511.728] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 511.728] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 511.728] (II) No input driver specified, ignoring this device.
[ 511.728] (II) This device may have been added with another device file.
[ 511.728] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 511.728] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 511.728] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 511.728] (**) Logitech USB Receiver: always reports core events
[ 511.728] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 511.728] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc518
[ 511.728] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 511.728] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 511.728] (--) evdev: Logitech USB Receiver: Found relative axes
[ 511.728] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 511.728] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 511.728] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 511.728] (--) evdev: Logitech USB Receiver: Found keys
[ 511.728] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 511.728] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 511.728] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 511.728] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 511.728] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 511.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C518.0002/input/input11/event8"
[ 511.728] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 511.728] (**) Option "xkb_rules" "evdev"
[ 511.728] (**) Option "xkb_model" "pc105"
[ 511.728] (**) Option "xkb_layout" "it"
[ 511.728] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 511.728] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 511.728] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 511.728] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 511.728] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 511.728] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 511.729] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/event7)
[ 511.729] (**) SYNAPTICS Synaptics Large Touch Screen: Applying InputClass "evdev touchscreen catchall"
[ 511.729] (II) Using input driver 'evdev' for 'SYNAPTICS Synaptics Large Touch Screen'
[ 511.729] (**) SYNAPTICS Synaptics Large Touch Screen: always reports core events
[ 511.729] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: Device: "/dev/input/event7"
[ 511.729] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Using mtdev for this device
[ 511.729] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Vendor 0x6cb Product 0xac3
[ 511.729] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute axes
[ 511.729] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute multitouch axes
[ 511.729] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: No buttons found, faking one.
[ 511.729] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found x and y absolute axes
[ 511.729] (--) evdev: SYNAPTICS Synaptics Large Touch Screen: Found absolute touchscreen
[ 511.729] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Configuring as touchscreen
[ 511.729] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: YAxisMapping: buttons 4 and 5
[ 511.729] (**) evdev: SYNAPTICS Synaptics Large Touch Screen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 511.729] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:06CB:0AC3.0003/input/input9/event7"
[ 511.729] (II) XINPUT: Adding extended input device "SYNAPTICS Synaptics Large Touch Screen" (type: TOUCHSCREEN, id 13)
[ 511.729] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: initialized for absolute axes.
[ 511.729] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) keeping acceleration scheme 1
[ 511.729] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration profile 0
[ 511.729] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration factor: 2.000
[ 511.729] (**) SYNAPTICS Synaptics Large Touch Screen: (accel) acceleration threshold: 4
[ 511.729] (II) config/udev: Adding input device SYNAPTICS Synaptics Large Touch Screen (/dev/input/mouse1)
[ 511.729] (II) No input driver specified, ignoring this device.
[ 511.729] (II) This device may have been added with another device file.
[ 511.729] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event16)
[ 511.729] (II) No input driver specified, ignoring this device.
[ 511.729] (II) This device may have been added with another device file.
[ 511.729] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[ 511.729] (II) No input driver specified, ignoring this device.
[ 511.729] (II) This device may have been added with another device file.
[ 511.729] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 511.729] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 511.729] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 511.729] (**) AT Translated Set 2 keyboard: always reports core events
[ 511.729] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 511.729] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 511.729] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 511.729] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 511.729] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 511.729] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 511.729] (**) Option "xkb_rules" "evdev"
[ 511.729] (**) Option "xkb_model" "pc105"
[ 511.729] (**) Option "xkb_layout" "it"
[ 511.730] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 511.730] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 511.730] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 511.730] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 511.730] (II) LoadModule: "synaptics"
[ 511.730] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 511.730] (II) Module synaptics: vendor="X.Org Foundation"
[ 511.730] compiled for 1.15.0, module version = 1.7.3
[ 511.730] Module class: X.Org XInput Driver
[ 511.730] ABI class: X.Org XInput driver, version 20.0
[ 511.730] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 511.730] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 511.730] (**) Option "Device" "/dev/input/event12"
[ 511.900] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 511.900] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5660 (res 42)
[ 511.900] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4646 (res 44)
[ 511.900] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 511.900] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 511.900] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 511.900] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 511.900] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 511.900] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 511.900] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 511.996] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event12"
[ 511.996] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 511.996] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 511.996] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 511.996] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 511.996] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 511.996] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 511.996] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 511.996] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 511.996] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 511.996] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 511.996] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 511.996] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 511.996] (II) No input driver specified, ignoring this device.
[ 511.996] (II) This device may have been added with another device file.
[ 511.997] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event18)
[ 511.997] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 511.997] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 511.997] (**) ACPI Virtual Keyboard Device: always reports core events
[ 511.997] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event18"
[ 511.997] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 511.997] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 511.997] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 511.997] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event18"
[ 511.997] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 16)
[ 511.997] (**) Option "xkb_rules" "evdev"
[ 511.997] (**) Option "xkb_model" "pc105"
[ 511.997] (**) Option "xkb_layout" "it"
[ 511.997] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 511.997] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 511.997] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 511.997] (**) Dell WMI hotkeys: always reports core events
[ 511.997] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 511.997] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 511.997] (--) evdev: Dell WMI hotkeys: Found keys
[ 511.997] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 511.997] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
[ 511.997] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 17)
[ 511.997] (**) Option "xkb_rules" "evdev"
[ 511.997] (**) Option "xkb_model" "pc105"
[ 511.997] (**) Option "xkb_layout" "it"
[ 512.320] (II) intel(0): EDID vendor "SHP", prod id 5112
[ 512.320] (II) intel(0): Printing DDC gathered Modelines:
[ 512.320] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 512.480] (II) intel(0): EDID vendor "SHP", prod id 5112
[ 512.481] (II) intel(0): Printing DDC gathered Modelines:
[ 512.481] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 512.560] (II) intel(0): EDID vendor "SHP", prod id 5112
[ 512.560] (II) intel(0): Printing DDC gathered Modelines:
[ 512.560] (II) intel(0): Modeline "3200x1800"x0.0 373.25 3200 3248 3280 3360 1800 1803 1808 1852 -hsync -vsync (111.1 kHz eP)
[ 524.653] Failed to switch from vt07 to vt01: Input/output error
[ 525.608] Failed to switch from vt07 to vt02: Input/output error
[ 526.182] Failed to switch from vt07 to vt03: Input/output error
[ 526.505] Failed to switch from vt07 to vt04: Input/output error
[ 526.651] Failed to switch from vt07 to vt05: Input/output error
[ 526.750] Failed to switch from vt07 to vt06: Input/output error
[ 526.926] Failed to switch from vt07 to vt08: Input/output error
[ 527.025] Failed to switch from vt07 to vt09: Input/output error
[ 527.149] Failed to switch from vt07 to vt10: Input/output error
[ 527.380] Failed to switch from vt07 to vt11: Input/output error
[ 528.724] Failed to switch from vt07 to vt08: Input/output error
[ 529.563] Failed to switch from vt07 to vt08: Input/output error
[ 544.413] Failed to switch from vt07 to vt01: Input/output error
[ 557.917] (II) evdev: Dell WMI hotkeys: Close
[ 557.917] (II) UnloadModule: "evdev"
[ 557.917] (II) evdev: ACPI Virtual Keyboard Device: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) UnloadModule: "synaptics"
[ 557.918] (II) evdev: AT Translated Set 2 keyboard: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: SYNAPTICS Synaptics Large Touch Screen: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: Logitech USB Receiver: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: Logitech USB Receiver: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: Integrated_Webcam_HD: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: Power Button: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: Video Bus: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: Video Bus: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.918] (II) evdev: Power Button: Close
[ 557.918] (II) UnloadModule: "evdev"
[ 557.919] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 558.661] (II) NOUVEAU(G0): Closed GPU channel 0
[ 559.689] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 559.689] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 559.689] (EE)
Fatal server error:
[ 559.689] (EE) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 559.689] (EE)
[ 559.689] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 559.689] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 559.689] (EE)
[ 559.689] (EE)
[ 559.689] (EE) Backtrace:
[ 559.689] (EE) 0: /usr/bin/Xorg (xorg_backtrace+0x48) [0x7f22f1169e58]
[ 559.689] (EE) 1: /usr/bin/Xorg (0x7f22f0fc2000+0x1abb49) [0x7f22f116db49]
[ 559.689] (EE) 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7f22efe5b000+0xf890) [0x7f22efe6a890]
[ 559.689] (EE) 3: ?? [0x7f22f2961ec0]
[ 559.689] (EE)
[ 559.689] (EE) Segmentation fault at address 0x7f22f2961ec0
[ 559.690] (EE)
FatalError re-entered, aborting
[ 559.690] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 559.690] (EE)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=80599
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3
E: DMI_VENDOR=Dell Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=98776
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_01
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=58855
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16/event13
N: input/event13
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16/event13
E: DMI_VENDOR=Dell Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=59003
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4e/LNXVIDEO:00/input/input15
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4e/LNXVIDEO:00/input/input15
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=57361
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4e/LNXVIDEO:00/input/input15/event12
N: input/event12
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4e/LNXVIDEO:00/input/input15/event12
E: DMI_VENDOR=Dell Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=57510
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=80412
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1
E: DMI_VENDOR=Dell Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=98658
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=80482
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=98718
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=27605
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input17/event16
N: input/event16
E: DEVNAME=/dev/input/event16
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input17/event16
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=80
E: SUBSYSTEM=input
E: USEC_INITIALIZED=27672
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=7"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=27535
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input18/event15
N: input/event15
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input18/event15
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=27587
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input19
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input19
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_03_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI HDMI/DP,pcm=8"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=27196
P: /devices/pci0000:00/0000:00:03.0/sound/card0/input19/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input19/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:03.0
E: ID_PATH_TAG=pci-0000_00_03_0
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=27452
P: /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input10
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input10
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_11_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=573c
E: ID_PATH=pci-0000:00:14.0-usb-0:11:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_11_1_0
E: ID_REVISION=3902
E: ID_SERIAL=CN0Y2TKG72487423A4KJA00_Integrated_Webcam_HD_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN0Y2TKG72487423A4KJA00
E: ID_VENDOR_ENC=CN0Y2TKG72487423A4KJA00
E: ID_VENDOR_ID=0bda
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v0BDAp573Ce3902-e0,1,kD4,ramlsfw
E: NAME="Integrated_Webcam_HD"
E: PHYS="usb-0000:00:14.0-11/button"
E: PRODUCT=3/bda/573c/3902
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=65297
P: /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input10/event8
N: input/event8
S: input/by-id/usb-CN0Y2TKG72487423A4KJA00_Integrated_Webcam_HD_200901010001-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:11:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-CN0Y2TKG72487423A4KJA00_Integrated_Webcam_HD_200901010001-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:11:1.0-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input10/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Integrated_Webcam_HD
E: ID_MODEL_ENC=Integrated_Webcam_HD
E: ID_MODEL_ID=573c
E: ID_PATH=pci-0000:00:14.0-usb-0:11:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_11_1_0
E: ID_REVISION=3902
E: ID_SERIAL=CN0Y2TKG72487423A4KJA00_Integrated_Webcam_HD_200901010001
E: ID_SERIAL_SHORT=200901010001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=CN0Y2TKG72487423A4KJA00
E: ID_VENDOR_ENC=CN0Y2TKG72487423A4KJA00
E: ID_VENDOR_ID=0bda
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=65404
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C518.0001/input/input11
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C518.0001/input/input11
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c518
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=4203
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046DpC518e0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:14.0-3/input0"
E: PRODUCT=3/46d/c518/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=72568
P: /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C518.0001/input/input11/event9
N: input/event9
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-event-mouse
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C518.0001/input/input11/event9
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c518
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=4203
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=72718
P: /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C518.0001/input/input11/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-mouse
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C518.0001/input/input11/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c518
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_0
E: ID_REVISION=4203
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=72633
P: /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C518.0002/input/input14
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C518.0002/input/input14
E: EV=1f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_3_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c518
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_1
E: ID_REVISION=4203
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=4837fff072ff32d bf54444600000000 1 20f948b17c000 6773fad9415fed 9ed68000004400 10000002
E: MODALIAS=input:b0003v046DpC518e0111-e0,1,2,3,4,k71,72,73,74,77,80,82,83,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AC,AD,AE,B0,B1,B2,B5,B6,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E2,E4,E7,E8,E9,EA,EB,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech USB Receiver"
E: PHYS="usb-0000:00:14.0-3/input1"
E: PRODUCT=3/46d/c518/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=78973
P: /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C518.0002/input/input14/event11
N: input/event11
S: input/by-id/usb-Logitech_USB_Receiver-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:3:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-if01 /dev/input/by-path/pci-0000:00:14.0-usb-0:3:1.1-event
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C518.0002/input/input14/event11
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c518
E: ID_PATH=pci-0000:00:14.0-usb-0:3:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_3_1_1
E: ID_REVISION=4203
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=79332
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0003/input/input12
E: ABS=260800000000003
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0003/input/input12
E: EV=b
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_6_1_0
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Synaptics_Large_Touch_Screen
E: ID_MODEL_ENC=Synaptics\x20Large\x20Touch\x20Screen
E: ID_MODEL_ID=0ac3
E: ID_PATH=pci-0000:00:14.0-usb-0:6:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_6_1_0
E: ID_REVISION=0002
E: ID_SERIAL=SYNAPTICS_Synaptics_Large_Touch_Screen
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SYNAPTICS
E: ID_VENDOR_ENC=SYNAPTICS
E: ID_VENDOR_ID=06cb
E: KEY=400 0 0 0 0 0
E: MODALIAS=input:b0003v06CBp0AC3e0111-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
E: NAME="SYNAPTICS Synaptics Large Touch Screen"
E: PHYS="usb-0000:00:14.0-6/input0"
E: PRODUCT=3/6cb/ac3/111
E: PROP=2
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=74596
P: /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0003/input/input12/event10
N: input/event10
S: input/by-id/usb-SYNAPTICS_Synaptics_Large_Touch_Screen-event-if00
S: input/by-path/pci-0000:00:14.0-usb-0:6:1.0-event
E: DEVLINKS=/dev/input/by-id/usb-SYNAPTICS_Synaptics_Large_Touch_Screen-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:6:1.0-event
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0003/input/input12/event10
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Synaptics_Large_Touch_Screen
E: ID_MODEL_ENC=Synaptics\x20Large\x20Touch\x20Screen
E: ID_MODEL_ID=0ac3
E: ID_PATH=pci-0000:00:14.0-usb-0:6:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_6_1_0
E: ID_REVISION=0002
E: ID_SERIAL=SYNAPTICS_Synaptics_Large_Touch_Screen
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SYNAPTICS
E: ID_VENDOR_ENC=SYNAPTICS
E: ID_VENDOR_ID=06cb
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=75021
P: /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0003/input/input12/mouse1
N: input/mouse1
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:06CB:0AC3.0003/input/input12/mouse1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_MODEL=Synaptics_Large_Touch_Screen
E: ID_MODEL_ENC=Synaptics\x20Large\x20Touch\x20Screen
E: ID_MODEL_ID=0ac3
E: ID_PATH=pci-0000:00:14.0-usb-0:6:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_6_1_0
E: ID_REVISION=0002
E: ID_SERIAL=SYNAPTICS_Synaptics_Large_Touch_Screen
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=SYNAPTICS
E: ID_VENDOR_ENC=SYNAPTICS
E: ID_VENDOR_ID=06cb
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=74661
P: /devices/pci0000:00/0000:00:1b.0/input/input5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0668e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card1/codec#0/beep0"
E: PRODUCT=1/10ec/668/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=83358
P: /devices/pci0000:00/0000:00:1b.0/input/input5/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5/event4
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=98964
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input6
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel PCH Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=83760
P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input6/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input6/event5
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=99400
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=1100f02902002 8380307cf910f001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,C1,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=6326
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=Dell Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=97936
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input8
E: ABS=660800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input8
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=e520 10000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,145,148,14A,14D,14E,14F,ra0,1,18,1C,2F,35,36,39,3A,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=5
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=42619
P: /devices/platform/i8042/serio1/input/input8/event17
N: input/event17
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event17
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event17
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=81
E: SUBSYSTEM=input
E: USEC_INITIALIZED=42737
P: /devices/platform/i8042/serio1/input/input8/mouse2
N: input/mouse2
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/mouse2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=42721
P: /devices/virtual/input/input20
E: DEVPATH=/devices/virtual/input/input20
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=14658
P: /devices/virtual/input/input20/event18
N: input/event18
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event18
E: DEVPATH=/devices/virtual/input/input20/event18
E: DMI_VENDOR=Dell Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=82
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14884
E: XKBLAYOUT=it
E: XKBMODEL=pc105
P: /devices/virtual/input/input9
E: DEVPATH=/devices/virtual/input/input9
E: EV=13
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=1500b00000000 200300000 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k94,95,A1,E0,E1,E3,EC,EE,F0,ram4,lsfw
E: MSC=10
E: NAME="Dell WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=1540
P: /devices/virtual/input/input9/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/virtual/input/input9/event7
E: DMI_VENDOR=Dell Inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=1614
E: XKBLAYOUT=it
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.894210] Linux agpgart interface v0.103
[ 2.226184] [drm] Initialized drm 1.1.0 20060810
[ 2.241670] [drm] Memory usable by graphics device = 2048M
[ 2.241673] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
[ 2.294792] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.294793] [drm] Driver supports precise vblank timestamp query.
[ 2.474956] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.502319] fbcon: inteldrmfb (fb0) is primary device
[ 3.744361] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 3.951699] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.971273] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.972420] [drm] hdmi device not found 2 0 1
[ 13.532894] nouveau [ DRM] VRAM: 2048 MiB
[ 13.532895] nouveau [ DRM] GART: 1048576 MiB
[ 13.532898] nouveau E[ DRM] Pointer to TMDS table invalid
[ 13.532922] nouveau [ DRM] DCB version 4.0
[ 13.532924] nouveau E[ DRM] Pointer to flat panel table invalid
[ 13.532960] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 13.547038] nouveau [ DRM] MM: using COPY for buffer copies
[ 13.547047] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 1
[ 15.684280] drm: not enough stolen space for compressed buffer (need 25165824 more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.
*** /var/apt/history.log
Start-Date: 2014-06-03 21:04:22
Commandline: apt-get upgrade
Upgrade: libstdc++-4.8-dev:amd64 (4.8.2-21, 4.8.3-2), libasan0:amd64 (4.8.2-21, 4.8.3-2), libasan1:amd64 (4.9.0-4, 4.9.0-5), libgnutls-openssl27:amd64 (3.2.14-1, 3.2.15-1), libquadmath0:amd64 (4.9.0-4, 4.9.0-5), gcc-4.8-base:amd64 (4.8.2-21, 4.8.3-2), libegl1-mesa:amd64 (10.1.2-1, 10.1.4-1), libopenvg1-mesa:amd64 (10.1.2-1, 10.1.4-1), libwireshark3:amd64 (1.10.7-2, 1.10.7-4), libfile-fcntllock-perl:amd64 (0.14-2+b1, 0.20-1), gcc-4.8-multilib:amd64 (4.8.2-21, 4.8.3-2), procps:amd64 (3.3.9-2, 3.3.9-5), lib32gcc1:amd64 (4.9.0-4, 4.9.0-5), lib32stdc++6:amd64 (4.9.0-4, 4.9.0-5), libubsan0:amd64 (4.9.0-4, 4.9.0-5), libegl1-mesa-drivers:amd64 (10.1.2-1, 10.1.4-1), libx32gcc-4.8-dev:amd64 (4.8.2-21, 4.8.3-2), cpp-4.8:amd64 (4.8.2-21, 4.8.3-2), cpp-4.9:amd64 (4.9.0-4, 4.9.0-5), libwiretap3:amd64 (1.10.7-2, 1.10.7-4), libstdc++-4.9-dev:amd64 (4.9.0-4, 4.9.0-5), libgomp1:amd64 (4.9.0-4, 4.9.0-5), lib32gcc-4.8-dev:amd64 (4.8.2-21, 4.8.3-2), libtsan0:amd64 (4.9.0-4, 4.9.0-5), libquvi7:amd64 (0.4.
1-2, 0.4.1-2.1), libgl1-mesa-dri:amd64 (10.1.2-1, 10.1.4-1), libx32asan0:amd64 (4.8.2-21, 4.8.3-2), libx32asan1:amd64 (4.9.0-4, 4.9.0-5), libcilkrts5:amd64 (4.9.0-4, 4.9.0-5), lib32ubsan0:amd64 (4.9.0-4, 4.9.0-5), libcap-ng0:amd64 (0.7.3-1+b1, 0.7.3-1.1), libwsutil3:amd64 (1.10.7-2, 1.10.7-4), gcc-4.9-locales:amd64 (4.9.0-4, 4.9.0-5), libwireshark-data:amd64 (1.10.7-2, 1.10.7-4), libx32itm1:amd64 (4.9.0-4, 4.9.0-5), libx32gcc-4.9-dev:amd64 (4.9.0-4, 4.9.0-5), libgcc1:amd64 (4.9.0-4, 4.9.0-5), lib32vtv0:amd64 (4.9.0-4, 4.9.0-5), libprocps3:amd64 (3.3.9-2, 3.3.9-5), libglapi-mesa:amd64 (10.1.2-1, 10.1.4-1), lib32gcc-4.9-dev:amd64 (4.9.0-4, 4.9.0-5), wireshark-common:amd64 (1.10.7-2, 1.10.7-4), libx32gomp1:amd64 (4.9.0-4, 4.9.0-5), libx32atomic1:amd64 (4.9.0-4, 4.9.0-5), libobjc4:amd64 (4.9.0-4, 4.9.0-5), libx32cilkrts5:amd64 (4.9.0-4, 4.9.0-5), libatomic1:amd64 (4.9.0-4, 4.9.0-5), libgles2-mesa:amd64 (10.1.2-1, 10.1.4-1), g++-4.8:amd64 (4.8.2-21, 4.8.3-2), lib32asan0:amd64 (4.8.2-21,
4.8.3-2), lib32asan1:amd64 (4.9.0-4, 4.9.0-5), libgl1-mesa-glx:amd64 (10.1.2-1, 10.1.4-1), libxatracker2:amd64 (10.1.2-1, 10.1.4-1), libvtv0:amd64 (4.9.0-4, 4.9.0-5), gcc-4.9-multilib:amd64 (4.9.0-4, 4.9.0-5), wireshark:amd64 (1.10.7-2, 1.10.7-4), libgcc-4.8-dev:amd64 (4.8.2-21, 4.8.3-2), lib32cilkrts5:amd64 (4.9.0-4, 4.9.0-5), gcc-4.8:amd64 (4.8.2-21, 4.8.3-2), gcc-4.9:amd64 (4.9.0-4, 4.9.0-5), libx32quadmath0:amd64 (4.9.0-4, 4.9.0-5), lib32gomp1:amd64 (4.9.0-4, 4.9.0-5), libwayland-egl1-mesa:amd64 (10.1.2-1, 10.1.4-1), libgnutls26:amd64 (2.12.23-15, 2.12.23-16), libgnutls28:amd64 (3.2.14-1, 3.2.15-1), lib32atomic1:amd64 (4.9.0-4, 4.9.0-5), lib32itm1:amd64 (4.9.0-4, 4.9.0-5), libgbm1:amd64 (10.1.2-1, 10.1.4-1), libx32gcc1:amd64 (4.9.0-4, 4.9.0-5), libgfortran3:amd64 (4.9.0-4, 4.9.0-5), libgcc-4.9-dev:amd64 (4.9.0-4, 4.9.0-5), gcc-4.8-locales:amd64 (4.8.2-21, 4.8.3-2), libx32stdc++6:amd64 (4.9.0-4, 4.9.0-5), liblsan0:amd64 (4.9.0-4, 4.9.0-5), libstdc++6:amd64 (4.9.0-4, 4.9.0-5), lib
32quadmath0:amd64 (4.9.0-4, 4.9.0-5), libitm1:amd64 (4.9.0-4, 4.9.0-5), gcc-4.9-base:amd64 (4.9.0-4, 4.9.0-5), libx32vtv0:amd64 (4.9.0-4, 4.9.0-5), libx32ubsan0:amd64 (4.9.0-4, 4.9.0-5)
End-Date: 2014-06-03 21:05:01
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.14-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages libgl1-mesa-dri depends on:
ii libc6 2.18-7
ii libdrm-intel1 2.4.54-1
ii libdrm-nouveau2 2.4.54-1
ii libdrm-radeon1 2.4.54-1
ii libdrm2 2.4.54-1
ii libelf1 0.157-3
ii libexpat1 2.1.0-5
ii libffi6 3.1~rc1+r3.0.13-12
ii libgcc1 1:4.9.0-5
ii libllvm3.4 1:3.4-2
ii libstdc++6 4.9.0-5
ii libtinfo5 5.9+20140118-1
ii multiarch-support 2.18-7
Versions of packages libgl1-mesa-dri recommends:
ii libtxc-dxtn-s2tc0 [libtxc-dxtn0] 0~git20131104-1.1
Versions of packages libgl1-mesa-dri suggests:
pn libglide3 <none>
Versions of packages xserver-xorg depends on:
ii libc6 2.18-7
ii x11-xkb-utils 7.7+1
ii xkb-data 2.11-1
ii xserver-xorg-core 2:1.15.1-1
ii xserver-xorg-input-all 1:7.7+7
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.8.2-1+b1
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.0-1+b2
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.7.3-1+b1
ii xserver-xorg-input-vmmouse [xorg-driver-input] 1:13.0.0-1+b2
ii xserver-xorg-input-wacom [xorg-driver-input] 0.23.0+20131011-1+b1
ii xserver-xorg-video-all 1:7.7+7
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.3.0-1+b1
ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.2-2
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b1
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.21.15-2+b1
ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.4-1+b2
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.3-2
ii xserver-xorg-video-modesetting [xorg-driver-video] 0.8.1-2
ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.8-1+b1
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.10-1+b1
ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.3.3-1+b1
ii xserver-xorg-video-r128 [xorg-driver-video] 6.9.2-1+b1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.3.0-1+b1
ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.7-2+b1
ii xserver-xorg-video-siliconmotion [xorg-driver-video] 1:1.7.7-2+b1
ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.6-2+b1
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.5-1+b1
ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.6-2+b1
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.3-1+b2
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.0.2-2
xserver-xorg recommends no packages.
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.102
ii libaudit1 1:2.3.6-1
ii libc6 2.18-7
ii libdrm2 2.4.54-1
ii libgcrypt11 1.5.3-4
ii libgl1-mesa-glx [libgl1] 10.1.4-1
ii libpciaccess0 0.13.2-1
ii libpixman-1-0 0.32.4-1
ii libselinux1 2.3-1
ii libudev1 204-8
ii libxau6 1:1.0.8-1
ii libxdmcp6 1:1.1.1-1
ii libxfont1 1:1.4.7-2
ii libxshmfence1 1.1-2
ii udev 204-8
ii xserver-common 2:1.15.1-1
xserver-xorg-core recommends no packages.
Versions of packages xserver-xorg-core suggests:
pn xfonts-100dpi | xfonts-75dpi <none>
pn xfonts-scalable <none>
-- no debconf information
Reply to: