Bug#742073: xserver-xorg-video-fbdev: Unable to load XVideo when using fbdev driver
Package: xserver-xorg-video-fbdev
Version: 1:0.4.4-1+b1
Severity: normal
This may be a bug, a configuration problem, or - preferably not - a
works_as_designed case.
* upgraded xserver-xorg packages from abi 12 to avi 14, losing the sis video
driver. The XVideo module worked with the sis driver.
* tried to set up the xserver to use the fbdriver instead.
* inserted the mode-specific info into /etc/fb.modes
----------------------------------
$ fbset -i
mode "1280x800-60"
# D: 108.003 MHz, H: 63.983 kHz, V: 60.021 Hz
geometry 1280 800 1280 12985 32
timings 9259 248 48 131 131 112 4
hsync high
vsync high
accel true
rgba 8/16,8/8,8/0,0/0
endmode
Frame buffer device information:
Name : SiS 760
Address : 0xe8000000
Size : 66486272
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 0
LineLength : 5120
MMIO Address: 0xe2100000
MMIO Size : 131072
Accelerator : SiS 330 (Xabre)
----------------------------------
* used the following in /etc/modules:
sisfb mode=1280x800x24 rate=60 mem=16384
* switched from gdm3 to wdm (another, unreported bug)
=> not using any xorg.conf, the system starts correctly and the openbox desktop
I'm using works properly.
* my only problem is now that I have not found a way to use the XVideo module.
Trying to load it explicitly gives the following messages in Xorg.0.log:
---------------------------------------
....
[ 85076.636] (II) Loader magic: 0x7f0b83347d40
[ 85076.636] (II) Module ABI versions:
[ 85076.636] X.Org ANSI C Emulation: 0.4
[ 85076.636] X.Org Video Driver: 15.0
[ 85076.636] X.Org XInput driver : 20.0
[ 85076.636] X.Org Server Extension : 8.0
[ 85076.636] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 85076.638] (--) PCI:*(0:1:0:0) 1039:6330:1025:0083 rev 0, Mem @
0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x0000a000/128
[ 85076.639] Initializing built-in extension Generic Event Extension
....
[ 85076.644] Initializing built-in extension XVideo
[ 85076.644] Initializing built-in extension XVideo-MotionCompensation
[ 85076.644] Initializing built-in extension SELinux
[ 85076.644] Initializing built-in extension XFree86-VidModeExtension
[ 85076.645] Initializing built-in extension XFree86-DGA
[ 85076.645] Initializing built-in extension XFree86-DRI
[ 85076.645] Initializing built-in extension DRI2
[ 85076.645] (II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
[ 85076.645] (II) LoadModule: "record"
[ 85076.645] (II) Module "record" already built-in
[ 85076.646] (II) LoadModule: "dri2"
[ 85076.646] (II) Module "dri2" already built-in
[ 85076.646] (II) LoadModule: "glx"
[ 85076.646] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 85076.647] (II) Module glx: vendor="X.Org Foundation"
[ 85076.647] compiled for 1.15.0, module version = 1.0.0
[ 85076.647] ABI class: X.Org Server Extension, version 8.0
[ 85076.647] (==) AIGLX enabled
[ 85076.647] Loading extension GLX
[ 85076.647] (II) LoadModule: "dri"
[ 85076.647] (II) Module "dri" already built-in
[ 85076.647] (II) LoadModule: "dbe"
[ 85076.648] (II) Module "dbe" already built-in
[ 85076.648] (II) LoadModule: "extmod"
[ 85076.648] (II) Module "extmod" already built-in
[ 85076.648] (II) LoadModule: "xvideo"
[ 85076.649] (WW) Warning, couldn't open module xvideo
[ 85076.649] (II) UnloadModule: "xvideo"
[ 85076.649] (II) Unloading xvideo
....
---------------------------------------
* I couldn't grab anything useful from the net, glad about any pointers you can
provide.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Oct 30 2012 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2323424 Feb 6 16:23 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330]
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.11-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.6-2 (2013-11-01)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 12085 Mar 17 17:29 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 19779 Mar 18 21:55 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 85690.175]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 85690.175] X Protocol Version 11, Revision 0
[ 85690.176] Build Operating System: Linux 3.12-1-amd64 x86_64 Debian
[ 85690.176] Current Operating System: Linux axrocet 3.11-1-amd64 #1 SMP Debian 3.11.6-2 (2013-11-01) x86_64
[ 85690.176] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11-1-amd64 root=/dev/mapper/vg00-lroot ro lvmwait=/dev/mapper/vg00-lroot rootdelay=10 quiet
[ 85690.177] Build Date: 06 February 2014 03:20:45PM
[ 85690.177] xorg-server 2:1.15.0-2 (http://www.debian.org/support)
[ 85690.177] Current version of pixman: 0.32.4
[ 85690.177] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 85690.177] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 85690.178] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 18 21:55:01 2014
[ 85690.179] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 85690.180] (==) No Layout section. Using the first Screen section.
[ 85690.180] (==) No screen section available. Using defaults.
[ 85690.180] (**) |-->Screen "Default Screen Section" (0)
[ 85690.180] (**) | |-->Monitor "<default monitor>"
[ 85690.181] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 85690.181] (==) Automatically adding devices
[ 85690.181] (==) Automatically enabling devices
[ 85690.181] (==) Automatically adding GPU devices
[ 85690.181] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 85690.181] Entry deleted from font path.
[ 85690.181] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 85690.181] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 85690.181] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 85690.181] (II) Loader magic: 0x7f3978a01d40
[ 85690.181] (II) Module ABI versions:
[ 85690.181] X.Org ANSI C Emulation: 0.4
[ 85690.181] X.Org Video Driver: 15.0
[ 85690.181] X.Org XInput driver : 20.0
[ 85690.181] X.Org Server Extension : 8.0
[ 85690.182] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 85690.187] (--) PCI:*(0:1:0:0) 1039:6330:1025:0083 rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x0000a000/128
[ 85690.188] Initializing built-in extension Generic Event Extension
[ 85690.188] Initializing built-in extension SHAPE
[ 85690.188] Initializing built-in extension MIT-SHM
[ 85690.190] Initializing built-in extension XInputExtension
[ 85690.191] Initializing built-in extension XTEST
[ 85690.191] Initializing built-in extension BIG-REQUESTS
[ 85690.191] Initializing built-in extension SYNC
[ 85690.191] Initializing built-in extension XKEYBOARD
[ 85690.191] Initializing built-in extension XC-MISC
[ 85690.192] Initializing built-in extension SECURITY
[ 85690.192] Initializing built-in extension XINERAMA
[ 85690.192] Initializing built-in extension XFIXES
[ 85690.192] Initializing built-in extension RENDER
[ 85690.192] Initializing built-in extension RANDR
[ 85690.193] Initializing built-in extension COMPOSITE
[ 85690.193] Initializing built-in extension DAMAGE
[ 85690.193] Initializing built-in extension MIT-SCREEN-SAVER
[ 85690.193] Initializing built-in extension DOUBLE-BUFFER
[ 85690.193] Initializing built-in extension RECORD
[ 85690.194] Initializing built-in extension DPMS
[ 85690.194] Initializing built-in extension Present
[ 85690.194] Initializing built-in extension DRI3
[ 85690.194] Initializing built-in extension X-Resource
[ 85690.194] Initializing built-in extension XVideo
[ 85690.195] Initializing built-in extension XVideo-MotionCompensation
[ 85690.195] Initializing built-in extension SELinux
[ 85690.195] Initializing built-in extension XFree86-VidModeExtension
[ 85690.195] Initializing built-in extension XFree86-DGA
[ 85690.195] Initializing built-in extension XFree86-DRI
[ 85690.196] Initializing built-in extension DRI2
[ 85690.196] (II) LoadModule: "glx"
[ 85690.197] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 85690.197] (II) Module glx: vendor="X.Org Foundation"
[ 85690.197] compiled for 1.15.0, module version = 1.0.0
[ 85690.197] ABI class: X.Org Server Extension, version 8.0
[ 85690.197] (==) AIGLX enabled
[ 85690.199] Loading extension GLX
[ 85690.199] (==) Matched sis as autoconfigured driver 0
[ 85690.199] (==) Matched sis as autoconfigured driver 1
[ 85690.199] (==) Matched modesetting as autoconfigured driver 2
[ 85690.199] (==) Matched fbdev as autoconfigured driver 3
[ 85690.199] (==) Matched vesa as autoconfigured driver 4
[ 85690.199] (==) Assigned the driver to the xf86ConfigLayout
[ 85690.199] (II) LoadModule: "sis"
[ 85690.203] (WW) Warning, couldn't open module sis
[ 85690.203] (II) UnloadModule: "sis"
[ 85690.203] (II) Unloading sis
[ 85690.203] (EE) Failed to load module "sis" (module does not exist, 0)
[ 85690.203] (II) LoadModule: "modesetting"
[ 85690.203] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 85690.204] (II) Module modesetting: vendor="X.Org Foundation"
[ 85690.204] compiled for 1.15.0, module version = 0.8.1
[ 85690.204] Module class: X.Org Video Driver
[ 85690.204] ABI class: X.Org Video Driver, version 15.0
[ 85690.204] (II) LoadModule: "fbdev"
[ 85690.204] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 85690.205] (II) Module fbdev: vendor="X.Org Foundation"
[ 85690.205] compiled for 1.15.0, module version = 0.4.4
[ 85690.205] Module class: X.Org Video Driver
[ 85690.205] ABI class: X.Org Video Driver, version 15.0
[ 85690.205] (II) LoadModule: "vesa"
[ 85690.205] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 85690.205] (II) Module vesa: vendor="X.Org Foundation"
[ 85690.205] compiled for 1.15.0, module version = 2.3.3
[ 85690.205] Module class: X.Org Video Driver
[ 85690.205] ABI class: X.Org Video Driver, version 15.0
[ 85690.205] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 85690.205] (II) FBDEV: driver for framebuffer: fbdev
[ 85690.205] (II) VESA: driver for VESA chipsets: vesa
[ 85690.205] (++) using VT number 7
[ 85691.092] (WW) Falling back to old probe method for modesetting
[ 85691.092] (II) Loading sub module "fbdevhw"
[ 85691.092] (II) LoadModule: "fbdevhw"
[ 85691.092] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 85691.092] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 85691.092] compiled for 1.15.0, module version = 0.0.2
[ 85691.092] ABI class: X.Org Video Driver, version 15.0
[ 85691.092] (**) FBDEV(1): claimed PCI slot 1@0:0:0
[ 85691.092] (II) FBDEV(1): using default device
[ 85691.092] (WW) Falling back to old probe method for vesa
[ 85691.092] (EE) Screen 0 deleted because of no matching config section.
[ 85691.092] (II) UnloadModule: "modesetting"
[ 85691.093] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 85691.093] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 85691.093] (==) FBDEV(0): RGB weight 888
[ 85691.093] (==) FBDEV(0): Default visual is TrueColor
[ 85691.093] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 85691.093] (II) FBDEV(0): hardware: SiS 760 (video memory: 64928kB)
[ 85691.093] (II) FBDEV(0): checking modes against framebuffer device...
[ 85691.093] (II) FBDEV(0): checking modes against monitor...
[ 85691.093] (--) FBDEV(0): Virtual size is 1280x800 (pitch 1280)
[ 85691.093] (**) FBDEV(0): Built-in mode "current": 108.0 MHz, 64.0 kHz, 60.0 Hz
[ 85691.093] (II) FBDEV(0): Modeline "current"x0.0 108.00 1280 1328 1440 1688 800 931 935 1066 +hsync +vsync -csync (64.0 kHz b)
[ 85691.093] (==) FBDEV(0): DPI set to (96, 96)
[ 85691.093] (II) Loading sub module "fb"
[ 85691.093] (II) LoadModule: "fb"
[ 85691.093] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 85691.093] (II) Module fb: vendor="X.Org Foundation"
[ 85691.093] compiled for 1.15.0, module version = 1.0.0
[ 85691.093] ABI class: X.Org ANSI C Emulation, version 0.4
[ 85691.093] (**) FBDEV(0): using shadow framebuffer
[ 85691.093] (II) Loading sub module "shadow"
[ 85691.093] (II) LoadModule: "shadow"
[ 85691.093] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 85691.094] (II) Module shadow: vendor="X.Org Foundation"
[ 85691.094] compiled for 1.15.0, module version = 1.1.0
[ 85691.094] ABI class: X.Org ANSI C Emulation, version 0.4
[ 85691.094] (II) UnloadModule: "vesa"
[ 85691.094] (II) Unloading vesa
[ 85691.094] (==) Depth 24 pixmap format is 32 bpp
[ 85691.714] (==) FBDEV(0): Backing store enabled
[ 85691.714] (==) FBDEV(0): DPMS enabled
[ 85691.714] (==) RandR enabled
[ 85691.736] (II) SELinux: Disabled on system
[ 85691.738] (II) AIGLX: Screen 0 is not DRI2 capable
[ 85691.738] (EE) AIGLX: reverting to software rendering
[ 85691.759] (II) AIGLX: Loaded and initialized swrast
[ 85691.760] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 85691.840] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 85691.840] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85691.840] (II) LoadModule: "evdev"
[ 85691.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 85691.841] (II) Module evdev: vendor="X.Org Foundation"
[ 85691.841] compiled for 1.15.0, module version = 2.8.2
[ 85691.841] Module class: X.Org XInput Driver
[ 85691.841] ABI class: X.Org XInput driver, version 20.0
[ 85691.841] (II) Using input driver 'evdev' for 'Power Button'
[ 85691.841] (**) Power Button: always reports core events
[ 85691.841] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 85691.841] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85691.841] (--) evdev: Power Button: Found keys
[ 85691.841] (II) evdev: Power Button: Configuring as keyboard
[ 85691.841] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 85691.841] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 85691.841] (**) Option "xkb_rules" "evdev"
[ 85691.841] (**) Option "xkb_model" "pc105"
[ 85691.841] (**) Option "xkb_layout" "ch"
[ 85691.841] (**) Option "xkb_variant" "de_nodeadkeys"
[ 85691.841] (**) Option "xkb_options" "compose:menu"
[ 85691.883] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 85691.883] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85691.883] (II) Using input driver 'evdev' for 'Power Button'
[ 85691.883] (**) Power Button: always reports core events
[ 85691.883] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 85691.883] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85691.883] (--) evdev: Power Button: Found keys
[ 85691.883] (II) evdev: Power Button: Configuring as keyboard
[ 85691.883] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 85691.883] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 85691.883] (**) Option "xkb_rules" "evdev"
[ 85691.883] (**) Option "xkb_model" "pc105"
[ 85691.883] (**) Option "xkb_layout" "ch"
[ 85691.883] (**) Option "xkb_variant" "de_nodeadkeys"
[ 85691.883] (**) Option "xkb_options" "compose:menu"
[ 85691.884] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 85691.884] (II) No input driver specified, ignoring this device.
[ 85691.884] (II) This device may have been added with another device file.
[ 85691.884] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 85691.884] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 85691.884] (II) Using input driver 'evdev' for 'Sleep Button'
[ 85691.884] (**) Sleep Button: always reports core events
[ 85691.884] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 85691.884] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 85691.885] (--) evdev: Sleep Button: Found keys
[ 85691.885] (II) evdev: Sleep Button: Configuring as keyboard
[ 85691.885] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 85691.885] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 85691.885] (**) Option "xkb_rules" "evdev"
[ 85691.885] (**) Option "xkb_model" "pc105"
[ 85691.885] (**) Option "xkb_layout" "ch"
[ 85691.885] (**) Option "xkb_variant" "de_nodeadkeys"
[ 85691.885] (**) Option "xkb_options" "compose:menu"
[ 85691.885] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 85691.885] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/event7)
[ 85691.886] (**) Logitech USB RECEIVER: Applying InputClass "evdev pointer catchall"
[ 85691.886] (II) Using input driver 'evdev' for 'Logitech USB RECEIVER'
[ 85691.886] (**) Logitech USB RECEIVER: always reports core events
[ 85691.886] (**) evdev: Logitech USB RECEIVER: Device: "/dev/input/event7"
[ 85691.886] (--) evdev: Logitech USB RECEIVER: Vendor 0x46d Product 0xc50e
[ 85691.886] (--) evdev: Logitech USB RECEIVER: Found 20 mouse buttons
[ 85691.886] (--) evdev: Logitech USB RECEIVER: Found scroll wheel(s)
[ 85691.886] (--) evdev: Logitech USB RECEIVER: Found relative axes
[ 85691.886] (--) evdev: Logitech USB RECEIVER: Found x and y relative axes
[ 85691.886] (II) evdev: Logitech USB RECEIVER: Configuring as mouse
[ 85691.886] (II) evdev: Logitech USB RECEIVER: Adding scrollwheel support
[ 85691.886] (**) evdev: Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5
[ 85691.886] (**) evdev: Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 85691.886] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/event7"
[ 85691.886] (II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE, id 9)
[ 85691.886] (II) evdev: Logitech USB RECEIVER: initialized for relative axes.
[ 85691.886] (**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1
[ 85691.886] (**) Logitech USB RECEIVER: (accel) acceleration profile 0
[ 85691.886] (**) Logitech USB RECEIVER: (accel) acceleration factor: 2.000
[ 85691.886] (**) Logitech USB RECEIVER: (accel) acceleration threshold: 4
[ 85691.887] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/mouse1)
[ 85691.887] (II) No input driver specified, ignoring this device.
[ 85691.887] (II) This device may have been added with another device file.
[ 85691.887] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 85691.887] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 85691.887] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 85691.887] (**) AT Translated Set 2 keyboard: always reports core events
[ 85691.887] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 85691.887] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 85691.887] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 85691.887] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 85691.887] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 85691.887] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 85691.887] (**) Option "xkb_rules" "evdev"
[ 85691.887] (**) Option "xkb_model" "pc105"
[ 85691.887] (**) Option "xkb_layout" "ch"
[ 85691.887] (**) Option "xkb_variant" "de_nodeadkeys"
[ 85691.887] (**) Option "xkb_options" "compose:menu"
[ 85691.888] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 85691.888] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 85691.888] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 85691.888] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 85691.888] (II) LoadModule: "synaptics"
[ 85691.888] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 85691.888] (II) Module synaptics: vendor="X.Org Foundation"
[ 85691.888] compiled for 1.15.0, module version = 1.7.3
[ 85691.888] Module class: X.Org XInput Driver
[ 85691.889] ABI class: X.Org XInput driver, version 20.0
[ 85691.889] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 85691.889] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 85691.889] (**) Option "Device" "/dev/input/event6"
[ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 58)
[ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 88)
[ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 85691.889] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 85691.889] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 85691.889] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 85691.889] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 85691.889] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 85691.889] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 85691.889] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 85691.889] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 85691.890] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 85691.890] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 85691.890] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 85691.890] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 85691.890] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 85691.890] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 85691.890] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 85691.890] (II) No input driver specified, ignoring this device.
[ 85691.890] (II) This device may have been added with another device file.
[ 85691.891] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8)
[ 85691.891] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 85691.891] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 85691.891] (**) ACPI Virtual Keyboard Device: always reports core events
[ 85691.891] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event8"
[ 85691.891] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 85691.891] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 85691.891] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 85691.891] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 85691.891] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[ 85691.891] (**) Option "xkb_rules" "evdev"
[ 85691.891] (**) Option "xkb_model" "pc105"
[ 85691.891] (**) Option "xkb_layout" "ch"
[ 85691.891] (**) Option "xkb_variant" "de_nodeadkeys"
[ 85691.891] (**) Option "xkb_options" "compose:menu"
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=987192
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: DMI_VENDOR=Acer, inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=506497
E: XKBLAYOUT=ch
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:menu
E: XKBVARIANT=de_nodeadkeys
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=983559
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2
E: DMI_VENDOR=Acer, inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=503393
E: XKBLAYOUT=ch
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:menu
E: XKBVARIANT=de_nodeadkeys
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=982006
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=502514
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=986342
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3
E: DMI_VENDOR=Acer, inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=504933
E: XKBLAYOUT=ch
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:menu
E: XKBVARIANT=de_nodeadkeys
P: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9
E: EV=20017
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_03_0-usb-0_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_RECEIVER
E: ID_MODEL_ENC=USB\x20RECEIVER
E: ID_MODEL_ID=c50e
E: ID_PATH=pci-0000:00:03.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_03_0-usb-0_2_1_0
E: ID_REVISION=2510
E: ID_SERIAL=Logitech_USB_RECEIVER
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: LED=ff00
E: MODALIAS=input:b0003v046DpC50Ee0111-e0,1,2,4,11,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,l8,9,A,B,C,D,E,sfw
E: MSC=10
E: NAME="Logitech USB RECEIVER"
E: PHYS="usb-0000:00:03.0-2/input0"
E: PRODUCT=3/46d/c50e/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=79423042586
P: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/event7
N: input/event7
S: input/by-id/usb-Logitech_USB_RECEIVER-event-mouse
S: input/by-path/pci-0000:00:03.0-usb-0:2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_RECEIVER-event-mouse /dev/input/by-path/pci-0000:00:03.0-usb-0:2:1.0-event-mouse
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/event7
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_RECEIVER
E: ID_MODEL_ENC=USB\x20RECEIVER
E: ID_MODEL_ID=c50e
E: ID_PATH=pci-0000:00:03.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_03_0-usb-0_2_1_0
E: ID_REVISION=2510
E: ID_SERIAL=Logitech_USB_RECEIVER
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=423043249
P: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/mouse1
N: input/mouse1
S: input/by-id/usb-Logitech_USB_RECEIVER-mouse
S: input/by-path/pci-0000:00:03.0-usb-0:2:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_RECEIVER-mouse /dev/input/by-path/pci-0000:00:03.0-usb-0:2:1.0-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input9/mouse1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_RECEIVER
E: ID_MODEL_ENC=USB\x20RECEIVER
E: ID_MODEL_ID=c50e
E: ID_PATH=pci-0000:00:03.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_03_0-usb-0_2_1_0
E: ID_REVISION=2510
E: ID_SERIAL=Logitech_USB_RECEIVER
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=423042860
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=10000 c020000000000 0 0 700f02000003 3803078f830f401 febfffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8D,8E,8F,94,95,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C0,C1,D9,E0,E1,E2,E3,EC,ED,EE,1A9,1B2,1B3,1D0,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=770239
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=Acer, inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=501645
E: XKBLAYOUT=ch
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:menu
E: XKBVARIANT=de_nodeadkeys
P: /devices/platform/i8042/serio1/input/input6
E: ABS=11000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input6
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=6420 3000f 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e12B1-e0,1,3,k100,101,102,103,110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/12b1
E: PROP=1
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=292465
P: /devices/platform/i8042/serio1/input/input6/event6
N: input/event6
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=292883
P: /devices/platform/i8042/serio1/input/input6/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=292717
P: /devices/platform/pcspkr/input/input5
E: DEVPATH=/devices/platform/pcspkr/input/input5
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=707379
P: /devices/platform/pcspkr/input/input5/event5
N: input/event5
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/pcspkr/input/input5/event5
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=708332
P: /devices/virtual/input/input8
E: DEVPATH=/devices/virtual/input/input8
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=957615
P: /devices/virtual/input/input8/event8
N: input/event8
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/virtual/input/input8/event8
E: DMI_VENDOR=Acer, inc.
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=960145
E: XKBLAYOUT=ch
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:menu
E: XKBVARIANT=de_nodeadkeys
DRM Information from dmesg:
---------------------------
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE f38)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE f38)
[ 0.742871] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[ 0.744644] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 0.763142] Linux agpgart interface v0.103
[ 25.011906] [drm] Initialized drm 1.1.0 20060810
[ 25.057758] [drm] Initialized sis 1.3.0 20070626 for 0000:01:00.0 on minor 0
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (300, 'unstable'), (200, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.11-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-fbdev depends on:
ii libc6 2.18-4
ii xserver-xorg-core [xorg-video-abi-15] 2:1.15.0-2
xserver-xorg-video-fbdev recommends no packages.
xserver-xorg-video-fbdev suggests no packages.
-- no debconf information
Reply to: