Your message dated Sun, 2 Mar 2014 12:45:04 +0100 with message-id <20140302114504.GA17725@betterave.cristau.org> and subject line Re: Bug#740493: xorg: Alps touchpad not recognized has caused the Debian Bug report #740493, regarding xorg: Alps touchpad not recognized to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 740493: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740493 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xorg: Alps touchpad not recognized
- From: Geoffroy Aubry <gaubry85@gmail.com>
- Date: Sun, 02 Mar 2014 12:36:30 +0100
- Message-id: <[🔎] 20140302113630.4298.16882.reportbug@jojo>
Package: xorg Version: 1:7.7+6 Severity: important The touchpad on the Fujitsu Lifebook U554 is not recognized. In /var/log/syslog, I have tons of lines like the following after touching the touchpad : Mar 2 12:09:00 jojo kernel: [ 839.155669] psmouse serio1: bad data from KBC - timeout -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Mar 1 13:26 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2323424 Feb 6 16:23 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09) Xorg X server configuration file status: ---------------------------------------- -rw-r--r-- 1 root root 2398 Mar 2 11:54 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: ------------------------------- Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "built-ins" EndSection Section "Module" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "synaptics" # Driver "mouse" # Option "Protocol" "auto" # Option "Protocol" "ImPS/2" Option "Protocol" "auto-dev" # Option "Device" "/dev/input/mice" # Option "Device" "/dev/psaux" Option "Device" "/dev/input/mouse1" Option "ZAxisMapping" "4 5 6 7" EndSection #Section "InputDevice" # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "ImPS/2" # Option "CorePointer" # Option "SHMConfig" "true" # Option "MaxTapMove" "0" # Option "MaxTapTime" "0" #EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "SWcursor" # [<bool>] #Option "kmsdev" # <str> #Option "ShadowFB" # [<bool>] Identifier "Card0" Driver "modesetting" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection /etc/X11/xorg.conf.d does not exist. /etc/modprobe.d contains no KMS configuration files. Kernel version (/proc/version): ------------------------------- Linux version 3.12-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.12.9-1 (2014-02-01) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 1720 Mar 2 00:32 /var/log/Xorg.1.log -rw-r--r-- 1 root root 1720 Mar 2 00:32 /var/log/Xorg.2.log -rw-r--r-- 1 root root 1720 Mar 2 00:32 /var/log/Xorg.3.log -rw-r--r-- 1 root root 1720 Mar 2 00:32 /var/log/Xorg.4.log -rw-r--r-- 1 root root 1720 Mar 2 00:32 /var/log/Xorg.5.log -rw-r--r-- 1 root root 31266 Mar 2 11:55 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 6.641] X.Org X Server 1.15.0 Release Date: 2013-12-27 [ 6.641] X Protocol Version 11, Revision 0 [ 6.641] Build Operating System: Linux 3.12-1-amd64 x86_64 Debian [ 6.641] Current Operating System: Linux jojo 3.12-1-amd64 #1 SMP Debian 3.12.9-1 (2014-02-01) x86_64 [ 6.641] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=b75b546f-c795-47db-91b2-38ef55091276 ro quiet [ 6.641] Build Date: 06 February 2014 03:20:45PM [ 6.641] xorg-server 2:1.15.0-2 (http://www.debian.org/support) [ 6.641] Current version of pixman: 0.32.4 [ 6.641] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 6.641] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 6.641] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 2 11:55:08 2014 [ 6.654] (==) Using config file: "/etc/X11/xorg.conf" [ 6.654] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 6.666] (==) ServerLayout "X.org Configured" [ 6.666] (**) |-->Screen "Screen0" (0) [ 6.666] (**) | |-->Monitor "Monitor0" [ 6.667] (**) | |-->Device "Card0" [ 6.667] (**) |-->Input Device "Mouse0" [ 6.667] (**) |-->Input Device "Keyboard0" [ 6.667] (==) Automatically adding devices [ 6.667] (==) Automatically enabling devices [ 6.667] (==) Automatically adding GPU devices [ 6.669] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 6.669] Entry deleted from font path. [ 6.674] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 6.674] Entry deleted from font path. [ 6.674] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 6.674] (**) ModulePath set to "/usr/lib/xorg/modules" [ 6.674] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 6.674] (WW) Disabling Keyboard0 [ 6.674] (II) Loader magic: 0x7f1606ab2d40 [ 6.674] (II) Module ABI versions: [ 6.674] X.Org ANSI C Emulation: 0.4 [ 6.674] X.Org Video Driver: 15.0 [ 6.674] X.Org XInput driver : 20.0 [ 6.674] X.Org Server Extension : 8.0 [ 6.674] (II) xfree86: Adding drm device (/dev/dri/card0) [ 6.675] (--) PCI:*(0:0:2:0) 8086:0a16:10cf:1812 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64 [ 6.676] Initializing built-in extension Generic Event Extension [ 6.676] Initializing built-in extension SHAPE [ 6.676] Initializing built-in extension MIT-SHM [ 6.676] Initializing built-in extension XInputExtension [ 6.676] Initializing built-in extension XTEST [ 6.676] Initializing built-in extension BIG-REQUESTS [ 6.676] Initializing built-in extension SYNC [ 6.676] Initializing built-in extension XKEYBOARD [ 6.676] Initializing built-in extension XC-MISC [ 6.676] Initializing built-in extension SECURITY [ 6.676] Initializing built-in extension XINERAMA [ 6.676] Initializing built-in extension XFIXES [ 6.676] Initializing built-in extension RENDER [ 6.676] Initializing built-in extension RANDR [ 6.676] Initializing built-in extension COMPOSITE [ 6.676] Initializing built-in extension DAMAGE [ 6.676] Initializing built-in extension MIT-SCREEN-SAVER [ 6.676] Initializing built-in extension DOUBLE-BUFFER [ 6.676] Initializing built-in extension RECORD [ 6.676] Initializing built-in extension DPMS [ 6.676] Initializing built-in extension Present [ 6.676] Initializing built-in extension DRI3 [ 6.676] Initializing built-in extension X-Resource [ 6.676] Initializing built-in extension XVideo [ 6.676] Initializing built-in extension XVideo-MotionCompensation [ 6.676] Initializing built-in extension SELinux [ 6.676] Initializing built-in extension XFree86-VidModeExtension [ 6.676] Initializing built-in extension XFree86-DGA [ 6.676] Initializing built-in extension XFree86-DRI [ 6.676] Initializing built-in extension DRI2 [ 6.676] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 6.676] (II) LoadModule: "glx" [ 6.679] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 6.682] (II) Module glx: vendor="X.Org Foundation" [ 6.682] compiled for 1.15.0, module version = 1.0.0 [ 6.682] ABI class: X.Org Server Extension, version 8.0 [ 6.682] (==) AIGLX enabled [ 6.682] Loading extension GLX [ 6.682] (II) LoadModule: "modesetting" [ 6.682] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 6.683] (II) Module modesetting: vendor="X.Org Foundation" [ 6.683] compiled for 1.15.0, module version = 0.8.1 [ 6.683] Module class: X.Org Video Driver [ 6.683] ABI class: X.Org Video Driver, version 15.0 [ 6.683] (II) LoadModule: "synaptics" [ 6.684] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 6.685] (II) Module synaptics: vendor="X.Org Foundation" [ 6.685] compiled for 1.15.0, module version = 1.7.3 [ 6.685] Module class: X.Org XInput Driver [ 6.685] ABI class: X.Org XInput driver, version 20.0 [ 6.685] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 6.685] (++) using VT number 7 [ 6.688] (II) modesetting(0): using drv /dev/dri/card0 [ 6.688] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32 [ 6.688] (==) modesetting(0): RGB weight 888 [ 6.688] (==) modesetting(0): Default visual is TrueColor [ 6.688] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 6.689] (II) modesetting(0): Output eDP-0 using monitor section Monitor0 [ 6.689] (II) modesetting(0): Output DisplayPort-0 has no monitor section [ 6.690] (II) modesetting(0): Output HDMI-0 has no monitor section [ 6.691] (II) modesetting(0): EDID for output eDP-0 [ 6.691] (II) modesetting(0): Manufacturer: LGD Model: 354 Serial#: 0 [ 6.691] (II) modesetting(0): Year: 2012 Week: 0 [ 6.691] (II) modesetting(0): EDID Version: 1.3 [ 6.691] (II) modesetting(0): Digital Display Input [ 6.691] (II) modesetting(0): Max Image Size [cm]: horiz.: 29 vert.: 16 [ 6.691] (II) modesetting(0): Gamma: 2.20 [ 6.691] (II) modesetting(0): No DPMS capabilities specified [ 6.691] (II) modesetting(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 6.691] (II) modesetting(0): First detailed timing is preferred mode [ 6.691] (II) modesetting(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555 [ 6.691] (II) modesetting(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329 [ 6.691] (II) modesetting(0): Manufacturer's mask: 0 [ 6.691] (II) modesetting(0): Supported detailed timing: [ 6.691] (II) modesetting(0): clock: 70.0 MHz Image Size: 293 x 165 mm [ 6.691] (II) modesetting(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0 [ 6.691] (II) modesetting(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0 [ 6.691] (II) modesetting(0): LG Display [ 6.691] (II) modesetting(0): LP133WH2-TLF2 [ 6.691] (II) modesetting(0): EDID (in hex): [ 6.691] (II) modesetting(0): 00ffffffffffff0030e4540300000000 [ 6.691] (II) modesetting(0): 00160103801d10780afc359658578e29 [ 6.691] (II) modesetting(0): 1f505400000001010101010101010101 [ 6.691] (II) modesetting(0): 010101010101581b566e500016302424 [ 6.691] (II) modesetting(0): 480025a5100000190000000000000000 [ 6.691] (II) modesetting(0): 00000000000000000000000000fe004c [ 6.691] (II) modesetting(0): 4720446973706c61790a2020000000fe [ 6.691] (II) modesetting(0): 004c503133335748322d544c463200ea [ 6.691] (II) modesetting(0): Printing probed modes for output eDP-0 [ 6.691] (II) modesetting(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP) [ 6.691] (II) modesetting(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 6.691] (II) modesetting(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 6.691] (II) modesetting(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 6.691] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 6.691] (II) modesetting(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 6.691] (II) modesetting(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 6.691] (II) modesetting(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 6.691] (II) modesetting(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 6.691] (II) modesetting(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 6.691] (II) modesetting(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 6.691] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 6.691] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 6.691] (II) modesetting(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 6.691] (II) modesetting(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 6.691] (II) modesetting(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d) [ 6.691] (II) modesetting(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 6.691] (II) modesetting(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 6.691] (II) modesetting(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d) [ 6.691] (II) modesetting(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 6.691] (II) modesetting(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 6.691] (II) modesetting(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d) [ 6.691] (II) modesetting(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d) [ 6.691] (II) modesetting(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d) [ 6.691] (II) modesetting(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 6.691] (II) modesetting(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 6.691] (II) modesetting(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 6.691] (II) modesetting(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 6.691] (II) modesetting(0): EDID for output DisplayPort-0 [ 6.692] (II) modesetting(0): EDID for output HDMI-0 [ 6.692] (II) modesetting(0): Output eDP-0 connected [ 6.692] (II) modesetting(0): Output DisplayPort-0 disconnected [ 6.692] (II) modesetting(0): Output HDMI-0 disconnected [ 6.692] (II) modesetting(0): Using exact sizes for initial modes [ 6.692] (II) modesetting(0): Output eDP-0 using initial mode 1366x768 [ 6.692] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 6.692] (==) modesetting(0): DPI set to (96, 96) [ 6.692] (II) Loading sub module "fb" [ 6.692] (II) LoadModule: "fb" [ 6.692] (II) Loading /usr/lib/xorg/modules/libfb.so [ 6.694] (II) Module fb: vendor="X.Org Foundation" [ 6.694] compiled for 1.15.0, module version = 1.0.0 [ 6.694] ABI class: X.Org ANSI C Emulation, version 0.4 [ 6.694] (II) Loading sub module "shadow" [ 6.694] (II) LoadModule: "shadow" [ 6.694] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 6.695] (II) Module shadow: vendor="X.Org Foundation" [ 6.695] compiled for 1.15.0, module version = 1.1.0 [ 6.695] ABI class: X.Org ANSI C Emulation, version 0.4 [ 6.695] (==) Depth 24 pixmap format is 32 bpp [ 6.734] (==) modesetting(0): Backing store enabled [ 6.734] (==) modesetting(0): Silken mouse enabled [ 6.734] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 6.737] (==) modesetting(0): DPMS enabled [ 6.756] (--) RandR disabled [ 6.761] (II) SELinux: Disabled on system [ 6.762] (II) AIGLX: Screen 0 is not DRI2 capable [ 6.762] (EE) AIGLX: reverting to software rendering [ 6.855] (II) AIGLX: Loaded and initialized swrast [ 6.855] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 6.855] (II) modesetting(0): Damage tracking initialized [ 6.855] (II) modesetting(0): Setting screen physical size to 361 x 203 [ 6.933] (II) Using input driver 'synaptics' for 'Mouse0' [ 6.933] (**) Option "CorePointer" [ 6.933] (**) Mouse0: always reports core events [ 6.933] (**) Option "Protocol" "auto-dev" [ 6.933] (**) Option "Device" "/dev/input/mouse1" [ 6.976] (EE) synaptics: Mouse0: Synaptics driver unable to detect protocol [ 6.976] (EE) PreInit returned 11 for "Mouse0" [ 6.976] (II) UnloadModule: "synaptics" [ 6.977] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 6.977] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.977] (II) LoadModule: "evdev" [ 6.977] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.978] (II) Module evdev: vendor="X.Org Foundation" [ 6.978] compiled for 1.15.0, module version = 2.8.2 [ 6.978] Module class: X.Org XInput Driver [ 6.978] ABI class: X.Org XInput driver, version 20.0 [ 6.978] (II) Using input driver 'evdev' for 'Power Button' [ 6.978] (**) Power Button: always reports core events [ 6.978] (**) evdev: Power Button: Device: "/dev/input/event4" [ 6.978] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.978] (--) evdev: Power Button: Found keys [ 6.978] (II) evdev: Power Button: Configuring as keyboard [ 6.978] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4" [ 6.979] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 6.979] (**) Option "xkb_rules" "evdev" [ 6.979] (**) Option "xkb_model" "pc105" [ 6.979] (**) Option "xkb_layout" "fr" [ 6.979] (**) Option "xkb_variant" "latin9" [ 6.996] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event6) [ 6.996] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall" [ 6.996] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3' [ 6.996] (**) Fujitsu FUJ02E3: always reports core events [ 6.996] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event6" [ 6.996] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6 [ 6.996] (--) evdev: Fujitsu FUJ02E3: Found keys [ 6.996] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard [ 6.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input7/event6" [ 6.996] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7) [ 6.996] (**) Option "xkb_rules" "evdev" [ 6.996] (**) Option "xkb_model" "pc105" [ 6.996] (**) Option "xkb_layout" "fr" [ 6.996] (**) Option "xkb_variant" "latin9" [ 6.996] (II) config/udev: Adding input device Video Bus (/dev/input/event12) [ 6.996] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 6.996] (II) Using input driver 'evdev' for 'Video Bus' [ 6.996] (**) Video Bus: always reports core events [ 6.996] (**) evdev: Video Bus: Device: "/dev/input/event12" [ 6.996] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 6.996] (--) evdev: Video Bus: Found keys [ 6.996] (II) evdev: Video Bus: Configuring as keyboard [ 6.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event12" [ 6.996] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 6.996] (**) Option "xkb_rules" "evdev" [ 6.996] (**) Option "xkb_model" "pc105" [ 6.996] (**) Option "xkb_layout" "fr" [ 6.996] (**) Option "xkb_variant" "latin9" [ 6.997] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event5) [ 6.997] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall" [ 6.997] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1' [ 6.997] (**) Fujitsu FUJ02B1: always reports core events [ 6.997] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event5" [ 6.997] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6 [ 6.997] (--) evdev: Fujitsu FUJ02B1: Found keys [ 6.997] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard [ 6.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input6/event5" [ 6.997] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9) [ 6.997] (**) Option "xkb_rules" "evdev" [ 6.997] (**) Option "xkb_model" "pc105" [ 6.997] (**) Option "xkb_layout" "fr" [ 6.997] (**) Option "xkb_variant" "latin9" [ 6.997] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 6.997] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.997] (II) Using input driver 'evdev' for 'Power Button' [ 6.997] (**) Power Button: always reports core events [ 6.997] (**) evdev: Power Button: Device: "/dev/input/event3" [ 6.997] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 6.997] (--) evdev: Power Button: Found keys [ 6.997] (II) evdev: Power Button: Configuring as keyboard [ 6.997] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event3" [ 6.997] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10) [ 6.997] (**) Option "xkb_rules" "evdev" [ 6.997] (**) Option "xkb_model" "pc105" [ 6.997] (**) Option "xkb_layout" "fr" [ 6.997] (**) Option "xkb_variant" "latin9" [ 6.997] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 6.997] (II) No input driver specified, ignoring this device. [ 6.997] (II) This device may have been added with another device file. [ 6.997] (II) config/udev: Adding drm device (/dev/dri/card0) [ 6.998] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15) [ 6.998] (II) No input driver specified, ignoring this device. [ 6.998] (II) This device may have been added with another device file. [ 6.998] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event14) [ 6.998] (II) No input driver specified, ignoring this device. [ 6.998] (II) This device may have been added with another device file. [ 6.998] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event13) [ 6.998] (II) No input driver specified, ignoring this device. [ 6.998] (II) This device may have been added with another device file. [ 6.998] (II) config/udev: Adding input device Microsoft Compact Optical Mouse 500 (/dev/input/event1) [ 6.998] (**) Microsoft Compact Optical Mouse 500: Applying InputClass "evdev pointer catchall" [ 6.998] (II) Using input driver 'evdev' for 'Microsoft Compact Optical Mouse 500' [ 6.998] (**) Microsoft Compact Optical Mouse 500: always reports core events [ 6.998] (**) evdev: Microsoft Compact Optical Mouse 500: Device: "/dev/input/event1" [ 6.998] (--) evdev: Microsoft Compact Optical Mouse 500: Vendor 0x45e Product 0x737 [ 6.998] (--) evdev: Microsoft Compact Optical Mouse 500: Found 3 mouse buttons [ 6.998] (--) evdev: Microsoft Compact Optical Mouse 500: Found scroll wheel(s) [ 6.998] (--) evdev: Microsoft Compact Optical Mouse 500: Found relative axes [ 6.998] (--) evdev: Microsoft Compact Optical Mouse 500: Found x and y relative axes [ 6.998] (II) evdev: Microsoft Compact Optical Mouse 500: Configuring as mouse [ 6.998] (II) evdev: Microsoft Compact Optical Mouse 500: Adding scrollwheel support [ 6.998] (**) evdev: Microsoft Compact Optical Mouse 500: YAxisMapping: buttons 4 and 5 [ 6.998] (**) evdev: Microsoft Compact Optical Mouse 500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input2/event1" [ 6.998] (II) XINPUT: Adding extended input device "Microsoft Compact Optical Mouse 500" (type: MOUSE, id 11) [ 6.998] (II) evdev: Microsoft Compact Optical Mouse 500: initialized for relative axes. [ 6.998] (**) Microsoft Compact Optical Mouse 500: (accel) keeping acceleration scheme 1 [ 6.998] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration profile 0 [ 6.998] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration factor: 2.000 [ 6.998] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration threshold: 4 [ 6.998] (II) config/udev: Adding input device Microsoft Compact Optical Mouse 500 (/dev/input/mouse0) [ 6.998] (II) No input driver specified, ignoring this device. [ 6.998] (II) This device may have been added with another device file. [ 6.998] (II) config/udev: Adding input device FJ Camera (/dev/input/event10) [ 6.998] (**) FJ Camera: Applying InputClass "evdev keyboard catchall" [ 6.998] (II) Using input driver 'evdev' for 'FJ Camera' [ 6.999] (**) FJ Camera: always reports core events [ 6.999] (**) evdev: FJ Camera: Device: "/dev/input/event10" [ 6.999] (--) evdev: FJ Camera: Vendor 0x4f2 Product 0xb3df [ 6.999] (--) evdev: FJ Camera: Found keys [ 6.999] (II) evdev: FJ Camera: Configuring as keyboard [ 6.999] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12/event10" [ 6.999] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 12) [ 6.999] (**) Option "xkb_rules" "evdev" [ 6.999] (**) Option "xkb_model" "pc105" [ 6.999] (**) Option "xkb_layout" "fr" [ 6.999] (**) Option "xkb_variant" "latin9" [ 6.999] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7) [ 6.999] (II) No input driver specified, ignoring this device. [ 6.999] (II) This device may have been added with another device file. [ 6.999] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8) [ 6.999] (II) No input driver specified, ignoring this device. [ 6.999] (II) This device may have been added with another device file. [ 6.999] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 6.999] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 6.999] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 6.999] (**) AT Translated Set 2 keyboard: always reports core events [ 6.999] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 6.999] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 6.999] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 6.999] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 6.999] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 6.999] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13) [ 6.999] (**) Option "xkb_rules" "evdev" [ 6.999] (**) Option "xkb_model" "pc105" [ 6.999] (**) Option "xkb_layout" "fr" [ 6.999] (**) Option "xkb_variant" "latin9" [ 6.999] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event11) [ 6.999] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall" [ 6.999] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse' [ 6.999] (**) ImPS/2 Generic Wheel Mouse: always reports core events [ 6.999] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event11" [ 7.000] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5 [ 7.000] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons [ 7.000] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s) [ 7.000] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes [ 7.000] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes [ 7.000] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse [ 7.000] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support [ 7.000] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 [ 7.000] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 7.000] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event11" [ 7.000] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 14) [ 7.000] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes. [ 7.000] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 [ 7.000] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0 [ 7.000] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000 [ 7.000] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4 [ 7.000] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1) [ 7.000] (II) No input driver specified, ignoring this device. [ 7.000] (II) This device may have been added with another device file. [ 7.000] (II) config/udev: Adding input device PC Speaker (/dev/input/event9) [ 7.000] (II) No input driver specified, ignoring this device. [ 7.000] (II) This device may have been added with another device file. [ 7.000] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event16) [ 7.000] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 7.000] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 7.000] (**) ACPI Virtual Keyboard Device: always reports core events [ 7.000] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event16" [ 7.000] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 7.000] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 7.000] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 7.000] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event16" [ 7.000] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15) [ 7.000] (**) Option "xkb_rules" "evdev" [ 7.000] (**) Option "xkb_model" "pc105" [ 7.000] (**) Option "xkb_layout" "fr" [ 7.000] (**) Option "xkb_variant" "latin9" [ 7.004] (II) config/udev: removing device ACPI Virtual Keyboard Device [ 7.020] (II) evdev: ACPI Virtual Keyboard Device: Close [ 7.020] (II) UnloadModule: "evdev" [ 7.020] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event16) [ 7.020] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 7.020] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 7.020] (**) ACPI Virtual Keyboard Device: always reports core events [ 7.020] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event16" [ 7.020] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 7.020] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 7.020] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 7.020] (**) Option "config_info" "udev:/sys/devices/virtual/input/input17/event16" [ 7.020] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 15) [ 7.020] (**) Option "xkb_rules" "evdev" [ 7.020] (**) Option "xkb_model" "pc105" [ 7.020] (**) Option "xkb_layout" "fr" [ 7.020] (**) Option "xkb_variant" "latin9" [ 7.670] (II) modesetting(0): EDID vendor "LGD", prod id 852 [ 7.670] (II) modesetting(0): Printing DDC gathered Modelines: [ 7.670] (II) modesetting(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP) [ 8.326] (II) modesetting(0): EDID vendor "LGD", prod id 852 [ 8.326] (II) modesetting(0): Printing DDC gathered Modelines: [ 8.326] (II) modesetting(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP) [ 8.494] (II) modesetting(0): EDID vendor "LGD", prod id 852 [ 8.494] (II) modesetting(0): Printing DDC gathered Modelines: [ 8.494] (II) modesetting(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP) [ 16.644] (II) modesetting(0): EDID vendor "LGD", prod id 852 [ 16.644] (II) modesetting(0): Printing DDC gathered Modelines: [ 16.644] (II) modesetting(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP) [ 17.218] (II) modesetting(0): EDID vendor "LGD", prod id 852 [ 17.218] (II) modesetting(0): Printing DDC gathered Modelines: [ 17.218] (II) modesetting(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP) [ 17.256] (II) modesetting(0): EDID vendor "LGD", prod id 852 [ 17.256] (II) modesetting(0): Printing DDC gathered Modelines: [ 17.256] (II) modesetting(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP) udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=62108 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4 N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4 E: DMI_VENDOR=FUJITSU E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=81849 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input7 E: DEVPATH=/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input7 E: EV=3 E: ID_FOR_SEAT=input-acpi-FUJ02E3_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-FUJ02E3:00 E: ID_PATH_TAG=acpi-FUJ02E3_00 E: KEY=1000000000c00 300000 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,k94,95,CA,CB,F0,ramlsfw E: NAME="Fujitsu FUJ02E3" E: PHYS="FUJ02E3/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=73960 P: /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input7/event6 N: input/event6 E: BACKSPACE=guess E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input7/event6 E: DMI_VENDOR=FUJITSU E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-FUJ02E3:00 E: ID_PATH_TAG=acpi-FUJ02E3_00 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=84163 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13 E: EV=3 E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b00000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=16428 P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event12 N: input/event12 E: BACKSPACE=guess E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13/event12 E: DMI_VENDOR=FUJITSU E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=16504 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input6 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input6 E: EV=3 E: ID_FOR_SEAT=input-acpi-FUJ02B1_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-FUJ02B1:00 E: ID_PATH_TAG=acpi-FUJ02B1_00 E: KEY=1000300000000 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,F0,ramlsfw E: NAME="Fujitsu FUJ02B1" E: PHYS="FUJ02B1/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=71432 P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input6/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input6/event5 E: DMI_VENDOR=FUJITSU E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-FUJ02B1:00 E: ID_PATH_TAG=acpi-FUJ02B1_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=82999 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 E: EV=3 E: ID_FOR_SEAT=input-acpi-PNP0C0C_00 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=10000000000000 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=61306 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event3 E: DMI_VENDOR=FUJITSU E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=80588 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 E: EV=21 E: ID_FOR_SEAT=input-acpi-PNP0C0D_00 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: TAGS=:seat: E: USEC_INITIALIZED=55764 P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event2 N: input/event2 E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event2 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=79512 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input14 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input14 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_03_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel MID HDMI/DP,pcm=3" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=27267 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input14/event15 N: input/event15 E: DEVNAME=/dev/input/event15 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input14/event15 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MAJOR=13 E: MINOR=79 E: SUBSYSTEM=input E: USEC_INITIALIZED=27880 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_03_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel MID HDMI/DP,pcm=7" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=27027 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input15/event14 N: input/event14 E: DEVNAME=/dev/input/event14 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input15/event14 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MAJOR=13 E: MINOR=78 E: SUBSYSTEM=input E: USEC_INITIALIZED=27253 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_03_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel MID HDMI/DP,pcm=8" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: TAGS=:seat: E: USEC_INITIALIZED=26998 P: /devices/pci0000:00/0000:00:03.0/sound/card0/input16/event13 N: input/event13 E: DEVNAME=/dev/input/event13 E: DEVPATH=/devices/pci0000:00/0000:00:03.0/sound/card0/input16/event13 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:03.0 E: ID_PATH_TAG=pci-0000_00_03_0 E: MAJOR=13 E: MINOR=77 E: SUBSYSTEM=input E: USEC_INITIALIZED=27014 P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input2 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input2 E: EV=17 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_2_1_0 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Compact_Optical_Mouse_500 E: ID_MODEL_ENC=Compact\x20Optical\x20Mouse\x20500 E: ID_MODEL_ID=0737 E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0 E: ID_REVISION=0100 E: ID_SERIAL=Microsoft_Compact_Optical_Mouse_500 E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: KEY=70000 0 0 0 0 E: MODALIAS=input:b0003v045Ep0737e0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw E: MSC=10 E: NAME="Microsoft Compact Optical Mouse 500" E: PHYS="usb-0000:00:14.0-2/input0" E: PRODUCT=3/45e/737/111 E: PROP=0 E: REL=103 E: SUBSYSTEM=input E: TAGS=:seat: E: UNIQ="" E: USEC_INITIALIZED=74663 P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input2/event1 N: input/event1 S: input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-event-mouse S: input/by-path/pci-0000:00:14.0-usb-0:2:1.0-event-mouse E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-event-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.0-event-mouse E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input2/event1 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Compact_Optical_Mouse_500 E: ID_MODEL_ENC=Compact\x20Optical\x20Mouse\x20500 E: ID_MODEL_ID=0737 E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0 E: ID_REVISION=0100 E: ID_SERIAL=Microsoft_Compact_Optical_Mouse_500 E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: USEC_INITIALIZED=78456 P: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input2/mouse0 N: input/mouse0 S: input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-mouse S: input/by-path/pci-0000:00:14.0-usb-0:2:1.0-mouse E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Compact_Optical_Mouse_500-mouse /dev/input/by-path/pci-0000:00:14.0-usb-0:2:1.0-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input2/mouse0 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=Compact_Optical_Mouse_500 E: ID_MODEL_ENC=Compact\x20Optical\x20Mouse\x20500 E: ID_MODEL_ID=0737 E: ID_PATH=pci-0000:00:14.0-usb-0:2:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_2_1_0 E: ID_REVISION=0100 E: ID_SERIAL=Microsoft_Compact_Optical_Mouse_500 E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Microsoft E: ID_VENDOR_ENC=Microsoft E: ID_VENDOR_ID=045e E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=74686 P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12 E: EV=3 E: ID_BUS=usb E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_5_1_0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=FJ_Camera E: ID_MODEL_ENC=FJ\x20Camera E: ID_MODEL_ID=b3df E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0 E: ID_REVISION=6910 E: ID_SERIAL=Chicony_Electronics_Co._Ltd._FJ_Camera E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Chicony_Electronics_Co._Ltd. E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd. E: ID_VENDOR_ID=04f2 E: KEY=100000 0 0 0 E: MODALIAS=input:b0003v04F2pB3DFe6910-e0,1,kD4,ramlsfw E: NAME="FJ Camera" E: PHYS="usb-0000:00:14.0-5/button" E: PRODUCT=3/4f2/b3df/6910 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=58728 P: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12/event10 N: input/event10 S: input/by-id/usb-Chicony_Electronics_Co._Ltd._FJ_Camera-event-if00 S: input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-id/usb-Chicony_Electronics_Co._Ltd._FJ_Camera-event-if00 /dev/input/by-path/pci-0000:00:14.0-usb-0:5:1.0-event E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12/event10 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_MODEL=FJ_Camera E: ID_MODEL_ENC=FJ\x20Camera E: ID_MODEL_ID=b3df E: ID_PATH=pci-0000:00:14.0-usb-0:5:1.0 E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_5_1_0 E: ID_REVISION=6910 E: ID_SERIAL=Chicony_Electronics_Co._Ltd._FJ_Camera E: ID_TYPE=video E: ID_USB_DRIVER=uvcvideo E: ID_USB_INTERFACES=:0e0100:0e0200: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Chicony_Electronics_Co._Ltd. E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2cLtd. E: ID_VENDOR_ID=04f2 E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: USEC_INITIALIZED=58779 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/pci0000:00/0000:00:1b.0/input/input9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9 E: EV=40001 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0001v10ECp0283e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card1/codec#0/beep0" E: PRODUCT=1/10ec/283/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=95366 P: /devices/pci0000:00/0000:00:1b.0/input/input9/event7 N: input/event7 E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9/event7 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=85639 P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10 E: EV=21 E: ID_FOR_SEAT=input-pci-0000_00_1b_0 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel PCH Headphone" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: TAGS=:seat: E: USEC_INITIALIZED=96735 P: /devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event8 N: input/event8 E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card1/input10/event8 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: USEC_INITIALIZED=86941 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_FOR_SEAT=input-platform-i8042-serio-0 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab83 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=80120 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: DMI_VENDOR=FUJITSU E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=77400 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 P: /devices/platform/i8042/serio1/input/input8 E: DEVPATH=/devices/platform/i8042/serio1/input/input8 E: EV=7 E: ID_FOR_SEAT=input-platform-i8042-serio-1 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=70000 0 0 0 0 E: MODALIAS=input:b0011v0002p0005e0000-e0,1,2,k110,111,112,r0,1,8,amlsfw E: NAME="ImPS/2 Generic Wheel Mouse" E: PHYS="isa0060/serio1/input0" E: PRODUCT=11/2/5/0 E: PROP=0 E: REL=103 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=9610 P: /devices/platform/i8042/serio1/input/input8/event11 N: input/event11 S: input/by-path/platform-i8042-serio-1-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event11 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: USEC_INITIALIZED=9741 P: /devices/platform/i8042/serio1/input/input8/mouse1 N: input/mouse1 S: input/by-path/platform-i8042-serio-1-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E: DEVNAME=/dev/input/mouse1 E: DEVPATH=/devices/platform/i8042/serio1/input/input8/mouse1 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E: ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=33 E: SUBSYSTEM=input E: USEC_INITIALIZED=9726 P: /devices/platform/pcspkr/input/input11 E: DEVPATH=/devices/platform/pcspkr/input/input11 E: EV=40001 E: ID_FOR_SEAT=input-platform-pcspkr E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=5546 P: /devices/platform/pcspkr/input/input11/event9 N: input/event9 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/platform/pcspkr/input/input11/event9 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=88102 P: /devices/pnp0/00:06 E: DEVPATH=/devices/pnp0/00:06 E: DRIVER=i8042 kbd E: ID_INPUT=1 E: ID_INPUT_TABLET=1 E: NAME=Serial Wacom Tablet E: SUBSYSTEM=pnp E: USEC_INITIALIZED=82814 P: /devices/virtual/input/input17 E: DEVPATH=/devices/virtual/input/input17 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw E: NAME="ACPI Virtual Keyboard Device" E: PRODUCT=3/0/0/4 E: PROP=0 E: SUBSYSTEM=input E: TAGS=:seat: E: USEC_INITIALIZED=31886 P: /devices/virtual/input/input17/event16 N: input/event16 E: BACKSPACE=guess E: DEVNAME=/dev/input/event16 E: DEVPATH=/devices/virtual/input/input17/event16 E: DMI_VENDOR=FUJITSU E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=80 E: SUBSYSTEM=input E: USEC_INITIALIZED=32041 E: XKBLAYOUT=fr E: XKBMODEL=pc105 E: XKBVARIANT=latin9 DRM Information from dmesg: --------------------------- -- System Information: Debian Release: jessie/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xorg depends on: ii gnome-terminal [x-terminal-emulator] 3.10.1-1 ii libgl1-mesa-dri 9.2.2-1 ii libgl1-mesa-glx [libgl1] 9.2.2-1 ii libglu1-mesa 9.0.0-2 ii x11-apps 7.7+2 ii x11-session-utils 7.7+1 ii x11-utils 7.7+1 ii x11-xkb-utils 7.7+1 ii x11-xserver-utils 7.7+2 ii xauth 1:1.0.7-1 ii xfonts-100dpi 1:1.0.3 ii xfonts-75dpi 1:1.0.3 ii xfonts-base 1:1.0.3 ii xfonts-scalable 1:1.0.3-1 ii xfonts-utils 1:7.7+1 ii xinit 1.3.2-1 ii xkb-data 2.10.1-1 ii xorg-docs-core 1:1.7-1 ii xserver-xorg 1:7.7+6 ii xterm [x-terminal-emulator] 301-1 xorg recommends no packages. Versions of packages xorg suggests: pn x11-xfs-utils <none> pn xorg-docs <none> Versions of packages xserver-xorg depends on: ii libc6 2.17-97 ii x11-xkb-utils 7.7+1 ii xkb-data 2.10.1-1 ii xserver-xorg-core 2:1.15.0-2 ii xserver-xorg-input-all 1:7.7+6 ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.8.2-1+b1 ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.0-1+b2 ii xserver-xorg-input-synaptics [xorg-driver-input] 1.7.3-1+b1 ii xserver-xorg-input-vmmouse [xorg-driver-input] 1:13.0.0-1+b2 ii xserver-xorg-input-wacom [xorg-driver-input] 0.23.0+20131011-1+b1 ii xserver-xorg-video-all 1:7.7+6 ii xserver-xorg-video-ati [xorg-driver-video] 1:7.3.0-1+b1 ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.2-1+b2 ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1+b1 ii xserver-xorg-video-intel [xorg-driver-video] 2:2.21.15-2+b1 ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.4-1+b2 ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.3-1+b1 ii xserver-xorg-video-modesetting [xorg-driver-video] 0.8.1-1+b1 ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.8-1+b1 ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.10-1+b1 ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.3.3-1+b1 ii xserver-xorg-video-r128 [xorg-driver-video] 6.9.2-1+b1 ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.3.0-1+b1 ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.7-2+b1 ii xserver-xorg-video-siliconmotion [xorg-driver-video] 1:1.7.7-2+b1 ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.6-2+b1 ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.5-1+b1 ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.6-2+b1 ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.3-1+b2 ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.0.1-3+b1 Versions of packages xserver-xorg recommends: ii libgl1-mesa-dri 9.2.2-1 -- no debconf information
--- End Message ---
--- Begin Message ---
- To: Geoffroy Aubry <gaubry85@gmail.com>, 740493-done@bugs.debian.org
- Subject: Re: Bug#740493: xorg: Alps touchpad not recognized
- From: Julien Cristau <jcristau@debian.org>
- Date: Sun, 2 Mar 2014 12:45:04 +0100
- Message-id: <20140302114504.GA17725@betterave.cristau.org>
- In-reply-to: <[🔎] 20140302113630.4298.16882.reportbug@jojo>
- References: <[🔎] 20140302113630.4298.16882.reportbug@jojo>
On Sun, Mar 2, 2014 at 12:36:30 +0100, Geoffroy Aubry wrote: > Package: xorg > Version: 1:7.7+6 > Severity: important > > The touchpad on the Fujitsu Lifebook U554 is not recognized. > > In /var/log/syslog, I have tons of lines like the following after touching the touchpad : > > Mar 2 12:09:00 jojo kernel: [ 839.155669] psmouse serio1: bad data from KBC - timeout > That is a kernel issue, nothing X can do about it. Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---