Your message dated Tue, 3 Dec 2013 22:52:19 +0100 with message-id <20131203215219.GC4822@betterave.cristau.org> and subject line Re: Bug#729157: Problem gone has caused the Debian Bug report #729157, regarding xserver-xorg-video-intel: After Resume Mouse is not working anymore [GMA X3500/82G35] to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 729157: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=729157 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-video-intel: After Resume Mouse is not working anymore [GMA X3500/82G35]
- From: Rainer Dorsch <rdorsch@web.de>
- Date: Sat, 09 Nov 2013 18:22:09 +0100
- Message-id: <20131109172209.15855.20487.reportbug@localhost.localdomain>
Package: xserver-xorg-video-intel Version: 2:2.21.15-1+b2 Severity: normal Dear Maintainer, after upgrading from wheezy to jessie, I have the problem, that after resume the mouse is not available anymore. As a workaround I can switch to a virtual console and back, then the mouse is back. I send in a follow-up the Xorg.0.log Thanks, Rainer -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Dec 29 2007 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2265256 Oct 8 23:49 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) Xorg X server configuration file status: ---------------------------------------- -rw-r--r-- 1 root root 66 Aug 25 2010 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: ------------------------------- #Section "Device" # Option "DPI" "96 x 96" #EndSection /etc/X11/xorg.conf.d does not exist. KMS configuration files: ------------------------ /etc/modprobe.d/i915-kms.conf: options i915 modeset=1 /etc/modprobe.d/radeon-kms.conf: options radeon modeset=1 Kernel version (/proc/version): ------------------------------- Linux version 3.10-3-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10) Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 23780 Jun 9 23:08 /var/log/Xorg.3.log -rw-r--r-- 1 root root 24229 Nov 6 17:00 /var/log/Xorg.2.log -rw-r--r-- 1 root root 23350 Nov 9 16:30 /var/log/Xorg.1.log -rw-r--r-- 1 root root 54354 Nov 9 17:59 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 18.189] X.Org X Server 1.14.3 Release Date: 2013-09-12 [ 18.189] X Protocol Version 11, Revision 0 [ 18.189] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian [ 18.189] Current Operating System: Linux blackbox 3.10-3-686-pae #1 SMP Debian 3.10.11-1 (2013-09-10) i686 [ 18.189] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-686-pae root=UUID=3bfc8f7b-628c-425d-af32-269e98a8f36e ro quiet elevator=noop rootflags=noatime,discard,data=ordered,errors=remount-ro drm.debug=6 [ 18.189] Build Date: 08 October 2013 09:42:53PM [ 18.189] xorg-server 2:1.14.3-4 (Julien Cristau <jcristau@debian.org>) [ 18.189] Current version of pixman: 0.30.2 [ 18.189] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.189] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.189] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 9 16:33:30 2013 [ 18.190] (==) Using config file: "/etc/X11/xorg.conf" [ 18.190] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.191] (==) No Layout section. Using the first Screen section. [ 18.191] (==) No screen section available. Using defaults. [ 18.191] (**) |-->Screen "Default Screen Section" (0) [ 18.191] (**) | |-->Monitor "<default monitor>" [ 18.191] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 18.192] (==) Automatically adding devices [ 18.192] (==) Automatically enabling devices [ 18.192] (==) Automatically adding GPU devices [ 18.193] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.193] Entry deleted from font path. [ 18.193] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.193] Entry deleted from font path. [ 18.193] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.193] Entry deleted from font path. [ 18.193] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.193] Entry deleted from font path. [ 18.193] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.193] Entry deleted from font path. [ 18.193] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.193] (==) ModulePath set to "/usr/lib/xorg/modules" [ 18.193] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.193] (II) Loader magic: 0xb777a6a0 [ 18.194] (II) Module ABI versions: [ 18.194] X.Org ANSI C Emulation: 0.4 [ 18.194] X.Org Video Driver: 14.1 [ 18.194] X.Org XInput driver : 19.1 [ 18.194] X.Org Server Extension : 7.0 [ 18.194] (II) xfree86: Adding drm device (/dev/dri/card0) [ 18.195] (--) PCI:*(0:0:2:0) 8086:2982:1043:8276 rev 3, Mem @ 0xfe800000/1048576, 0xd0000000/268435456, I/O @ 0x0000cc00/8 [ 18.195] (--) PCI: (0:0:2:1) 8086:2983:1043:8276 rev 3, Mem @ 0xfe900000/1048576 [ 18.195] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.196] Initializing built-in extension Generic Event Extension [ 18.196] Initializing built-in extension SHAPE [ 18.196] Initializing built-in extension MIT-SHM [ 18.196] Initializing built-in extension XInputExtension [ 18.196] Initializing built-in extension XTEST [ 18.196] Initializing built-in extension BIG-REQUESTS [ 18.196] Initializing built-in extension SYNC [ 18.196] Initializing built-in extension XKEYBOARD [ 18.196] Initializing built-in extension XC-MISC [ 18.196] Initializing built-in extension SECURITY [ 18.196] Initializing built-in extension XINERAMA [ 18.196] Initializing built-in extension XFIXES [ 18.196] Initializing built-in extension RENDER [ 18.196] Initializing built-in extension RANDR [ 18.196] Initializing built-in extension COMPOSITE [ 18.196] Initializing built-in extension DAMAGE [ 18.196] Initializing built-in extension MIT-SCREEN-SAVER [ 18.196] Initializing built-in extension DOUBLE-BUFFER [ 18.196] Initializing built-in extension RECORD [ 18.196] Initializing built-in extension DPMS [ 18.196] Initializing built-in extension X-Resource [ 18.196] Initializing built-in extension XVideo [ 18.196] Initializing built-in extension XVideo-MotionCompensation [ 18.196] Initializing built-in extension SELinux [ 18.196] Initializing built-in extension XFree86-VidModeExtension [ 18.196] Initializing built-in extension XFree86-DGA [ 18.196] Initializing built-in extension XFree86-DRI [ 18.196] Initializing built-in extension DRI2 [ 18.196] (II) LoadModule: "glx" [ 18.196] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 18.199] (II) Module glx: vendor="X.Org Foundation" [ 18.199] compiled for 1.14.3, module version = 1.0.0 [ 18.199] ABI class: X.Org Server Extension, version 7.0 [ 18.199] (==) AIGLX enabled [ 18.199] Loading extension GLX [ 18.199] (==) Matched intel as autoconfigured driver 0 [ 18.199] (==) Matched intel as autoconfigured driver 1 [ 18.199] (==) Matched vesa as autoconfigured driver 2 [ 18.199] (==) Matched modesetting as autoconfigured driver 3 [ 18.199] (==) Matched fbdev as autoconfigured driver 4 [ 18.199] (==) Assigned the driver to the xf86ConfigLayout [ 18.199] (II) LoadModule: "intel" [ 18.199] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.203] (II) Module intel: vendor="X.Org Foundation" [ 18.203] compiled for 1.14.3, module version = 2.21.15 [ 18.203] Module class: X.Org Video Driver [ 18.203] ABI class: X.Org Video Driver, version 14.1 [ 18.203] (II) LoadModule: "vesa" [ 18.203] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 18.204] (II) Module vesa: vendor="X.Org Foundation" [ 18.204] compiled for 1.14.3, module version = 2.3.3 [ 18.204] Module class: X.Org Video Driver [ 18.204] ABI class: X.Org Video Driver, version 14.1 [ 18.204] (II) LoadModule: "modesetting" [ 18.204] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 18.204] (II) Module modesetting: vendor="X.Org Foundation" [ 18.204] compiled for 1.14.3, module version = 0.8.0 [ 18.204] Module class: X.Org Video Driver [ 18.204] ABI class: X.Org Video Driver, version 14.1 [ 18.204] (II) LoadModule: "fbdev" [ 18.205] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 18.205] (II) Module fbdev: vendor="X.Org Foundation" [ 18.205] compiled for 1.14.3, module version = 0.4.4 [ 18.205] Module class: X.Org Video Driver [ 18.205] ABI class: X.Org Video Driver, version 14.1 [ 18.205] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 18.205] (II) VESA: driver for VESA chipsets: vesa [ 18.205] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 18.205] (II) FBDEV: driver for framebuffer: fbdev [ 18.205] (++) using VT number 7 [ 18.213] (WW) Falling back to old probe method for vesa [ 18.213] (WW) Falling back to old probe method for modesetting [ 18.213] (WW) Falling back to old probe method for fbdev [ 18.213] (II) Loading sub module "fbdevhw" [ 18.213] (II) LoadModule: "fbdevhw" [ 18.213] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 18.214] (II) Module fbdevhw: vendor="X.Org Foundation" [ 18.214] compiled for 1.14.3, module version = 0.0.2 [ 18.214] ABI class: X.Org Video Driver, version 14.1 [ 18.214] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 18.214] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.214] (==) intel(0): RGB weight 888 [ 18.214] (==) intel(0): Default visual is TrueColor [ 18.214] (--) intel(0): Integrated Graphics Chipset: Intel(R) G35 [ 18.214] (**) intel(0): Relaxed fencing enabled [ 18.214] (**) intel(0): Wait on SwapBuffers? enabled [ 18.214] (**) intel(0): Triple buffering? enabled [ 18.214] (**) intel(0): Framebuffer tiled [ 18.214] (**) intel(0): Pixmaps tiled [ 18.214] (**) intel(0): 3D buffers tiled [ 18.215] (**) intel(0): SwapBuffers wait enabled [ 18.215] (==) intel(0): video overlay key set to 0x101fe [ 18.236] (II) intel(0): Output VGA1 has no monitor section [ 18.302] (II) intel(0): Output HDMI1 has no monitor section [ 18.324] (II) intel(0): EDID for output VGA1 [ 18.399] (II) intel(0): EDID for output HDMI1 [ 18.399] (II) intel(0): Manufacturer: ENC Model: 1687 Serial#: 16843009 [ 18.399] (II) intel(0): Year: 2004 Week: 7 [ 18.399] (II) intel(0): EDID Version: 1.2 [ 18.399] (II) intel(0): Digital Display Input [ 18.399] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30 [ 18.399] (II) intel(0): Gamma: 2.20 [ 18.399] (II) intel(0): DPMS capabilities: StandBy Suspend Off [ 18.399] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 18.399] (II) intel(0): First detailed timing is preferred mode [ 18.399] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 18.399] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 18.399] (II) intel(0): Supported established timings: [ 18.399] (II) intel(0): 720x400@70Hz [ 18.399] (II) intel(0): 640x480@60Hz [ 18.399] (II) intel(0): 800x600@60Hz [ 18.399] (II) intel(0): 1024x768@60Hz [ 18.399] (II) intel(0): Manufacturer's mask: 0 [ 18.399] (II) intel(0): Supported standard timings: [ 18.399] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 18.399] (II) intel(0): Supported detailed timing: [ 18.399] (II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm [ 18.399] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 18.399] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 18.399] (II) intel(0): Serial No: A6273024 [ 18.399] (II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz [ 18.399] (II) intel(0): Monitor name: L767 [ 18.399] (II) intel(0): EDID (in hex): [ 18.399] (II) intel(0): 00ffffffffffff0015c3871601010101 [ 18.399] (II) intel(0): 070e010280261e78eaee95a3544c9926 [ 18.399] (II) intel(0): 0f5054a1080081800101010101010101 [ 18.399] (II) intel(0): 010101010101302a009851002a403070 [ 18.399] (II) intel(0): 1300782d1100001e000000ff00413632 [ 18.399] (II) intel(0): 37333032340a20202020000000fd003b [ 18.399] (II) intel(0): 3d1f400b000a202020202020000000fc [ 18.399] (II) intel(0): 004c3736370a2020202020202020005a [ 18.399] (II) intel(0): Printing probed modes for output HDMI1 [ 18.399] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 18.399] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 18.399] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 18.399] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 18.399] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 18.399] (II) intel(0): Output VGA1 disconnected [ 18.399] (II) intel(0): Output HDMI1 connected [ 18.399] (II) intel(0): Using exact sizes for initial modes [ 18.399] (II) intel(0): Output HDMI1 using initial mode 1280x1024 [ 18.399] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 18.399] (II) intel(0): Kernel page flipping support detected, enabling [ 18.399] (==) intel(0): DPI set to (96, 96) [ 18.399] (II) Loading sub module "fb" [ 18.399] (II) LoadModule: "fb" [ 18.399] (II) Loading /usr/lib/xorg/modules/libfb.so [ 18.400] (II) Module fb: vendor="X.Org Foundation" [ 18.400] compiled for 1.14.3, module version = 1.0.0 [ 18.400] ABI class: X.Org ANSI C Emulation, version 0.4 [ 18.400] (II) Loading sub module "dri2" [ 18.400] (II) LoadModule: "dri2" [ 18.400] (II) Module "dri2" already built-in [ 18.400] (II) UnloadModule: "vesa" [ 18.400] (II) Unloading vesa [ 18.400] (II) UnloadModule: "modesetting" [ 18.400] (II) Unloading modesetting [ 18.400] (II) UnloadModule: "fbdev" [ 18.400] (II) Unloading fbdev [ 18.400] (II) UnloadSubModule: "fbdevhw" [ 18.400] (II) Unloading fbdevhw [ 18.400] (==) Depth 24 pixmap format is 32 bpp [ 18.401] (II) intel(0): [DRI2] Setup complete [ 18.401] (II) intel(0): [DRI2] DRI driver: i965 [ 18.401] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled [ 18.413] (II) UXA(0): Driver registered support for the following operations: [ 18.413] (II) solid [ 18.413] (II) copy [ 18.413] (II) composite (RENDER acceleration) [ 18.413] (II) put_image [ 18.413] (II) get_image [ 18.413] (==) intel(0): Backing store disabled [ 18.413] (==) intel(0): Silken mouse enabled [ 18.413] (II) intel(0): Initializing HW Cursor [ 18.413] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 18.414] (==) intel(0): DPMS enabled [ 18.414] (==) intel(0): Intel XvMC decoder enabled [ 18.414] (II) intel(0): Set up textured video [ 18.414] (II) intel(0): Set up overlay video [ 18.414] (II) intel(0): [XvMC] i965_xvmc driver initialized. [ 18.414] (II) intel(0): direct rendering: DRI2 Enabled [ 18.414] (==) intel(0): hotplug detection: "enabled" [ 18.432] (--) RandR disabled [ 18.440] (II) SELinux: Disabled on system [ 18.458] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 18.458] (II) AIGLX: enabled GLX_INTEL_swap_event [ 18.458] (II) AIGLX: enabled GLX_ARB_create_context [ 18.458] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 18.458] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 18.458] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 18.458] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 18.458] (II) AIGLX: Loaded and initialized i965 [ 18.458] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 18.458] (II) intel(0): Setting screen physical size to 338 x 270 [ 18.512] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 18.512] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 18.512] (II) LoadModule: "evdev" [ 18.513] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 18.514] (II) Module evdev: vendor="X.Org Foundation" [ 18.514] compiled for 1.14.3, module version = 2.8.2 [ 18.514] Module class: X.Org XInput Driver [ 18.514] ABI class: X.Org XInput driver, version 19.1 [ 18.514] (II) Using input driver 'evdev' for 'Power Button' [ 18.514] (**) Power Button: always reports core events [ 18.514] (**) evdev: Power Button: Device: "/dev/input/event3" [ 18.514] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 18.514] (--) evdev: Power Button: Found keys [ 18.514] (II) evdev: Power Button: Configuring as keyboard [ 18.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 18.514] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 18.514] (**) Option "xkb_rules" "evdev" [ 18.514] (**) Option "xkb_model" "pc105" [ 18.514] (**) Option "xkb_layout" "us" [ 18.515] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 18.515] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 18.515] (II) Using input driver 'evdev' for 'Power Button' [ 18.515] (**) Power Button: always reports core events [ 18.515] (**) evdev: Power Button: Device: "/dev/input/event2" [ 18.515] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 18.515] (--) evdev: Power Button: Found keys [ 18.515] (II) evdev: Power Button: Configuring as keyboard [ 18.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 18.515] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 18.515] (**) Option "xkb_rules" "evdev" [ 18.515] (**) Option "xkb_model" "pc105" [ 18.515] (**) Option "xkb_layout" "us" [ 18.515] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.515] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 18.515] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 18.515] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 18.515] (**) Logitech USB Optical Mouse: always reports core events [ 18.515] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 18.515] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b [ 18.515] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons [ 18.515] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 18.515] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 18.515] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 18.515] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 18.515] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 18.515] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 18.515] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 18.516] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1" [ 18.516] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8) [ 18.516] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 18.516] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 18.516] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 18.516] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 18.516] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 18.516] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 18.516] (II) No input driver specified, ignoring this device. [ 18.516] (II) This device may have been added with another device file. [ 18.516] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) [ 18.516] (II) No input driver specified, ignoring this device. [ 18.516] (II) This device may have been added with another device file. [ 18.516] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10) [ 18.516] (II) No input driver specified, ignoring this device. [ 18.516] (II) This device may have been added with another device file. [ 18.517] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11) [ 18.517] (II) No input driver specified, ignoring this device. [ 18.517] (II) This device may have been added with another device file. [ 18.517] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12) [ 18.517] (II) No input driver specified, ignoring this device. [ 18.517] (II) This device may have been added with another device file. [ 18.517] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13) [ 18.517] (II) No input driver specified, ignoring this device. [ 18.517] (II) This device may have been added with another device file. [ 18.517] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14) [ 18.517] (II) No input driver specified, ignoring this device. [ 18.517] (II) This device may have been added with another device file. [ 18.518] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6) [ 18.518] (II) No input driver specified, ignoring this device. [ 18.518] (II) This device may have been added with another device file. [ 18.518] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7) [ 18.518] (II) No input driver specified, ignoring this device. [ 18.518] (II) This device may have been added with another device file. [ 18.518] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8) [ 18.518] (II) No input driver specified, ignoring this device. [ 18.518] (II) This device may have been added with another device file. [ 18.518] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9) [ 18.518] (II) No input driver specified, ignoring this device. [ 18.518] (II) This device may have been added with another device file. [ 18.519] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 18.519] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 18.519] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 18.519] (**) AT Translated Set 2 keyboard: always reports core events [ 18.519] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 18.519] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 18.519] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 18.519] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 18.519] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 18.519] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 18.519] (**) Option "xkb_rules" "evdev" [ 18.519] (**) Option "xkb_model" "pc105" [ 18.519] (**) Option "xkb_layout" "us" [ 18.519] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 18.519] (II) No input driver specified, ignoring this device. [ 18.519] (II) This device may have been added with another device file. [ 166.175] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 166.175] (II) intel(0): Using EDID range info for horizontal sync [ 166.175] (II) intel(0): Using EDID range info for vertical refresh [ 166.175] (II) intel(0): Printing DDC gathered Modelines: [ 166.175] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 166.175] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 166.175] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 166.175] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 166.175] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 3968.948] (II) AIGLX: Suspending AIGLX clients for VT switch [ 3994.353] (II) Open ACPI successful (/var/run/acpid.socket) [ 3994.353] (II) AIGLX: Resuming AIGLX clients after VT switch [ 3994.450] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 3994.450] (II) intel(0): Using hsync ranges from config file [ 3994.450] (II) intel(0): Using vrefresh ranges from config file [ 3994.450] (II) intel(0): Printing DDC gathered Modelines: [ 3994.450] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 3994.450] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 3994.450] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 3994.450] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 3994.450] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 3994.450] setversion 1.4 failed [ 4035.508] (II) AIGLX: Suspending AIGLX clients for VT switch [ 4037.484] (II) Open ACPI successful (/var/run/acpid.socket) [ 4037.484] (II) AIGLX: Resuming AIGLX clients after VT switch [ 4037.582] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 4037.582] (II) intel(0): Using hsync ranges from config file [ 4037.582] (II) intel(0): Using vrefresh ranges from config file [ 4037.582] (II) intel(0): Printing DDC gathered Modelines: [ 4037.582] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 4037.582] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4037.582] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4037.582] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4037.582] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4420.887] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 4420.887] (II) intel(0): Using hsync ranges from config file [ 4420.887] (II) intel(0): Using vrefresh ranges from config file [ 4420.887] (II) intel(0): Printing DDC gathered Modelines: [ 4420.887] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 4420.887] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4420.887] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4420.887] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4420.887] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4448.020] (II) AIGLX: Suspending AIGLX clients for VT switch [ 4448.516] (II) evdev: AT Translated Set 2 keyboard: Close [ 4448.516] (II) UnloadModule: "evdev" [ 4448.516] (II) evdev: Logitech USB Optical Mouse: Close [ 4448.516] (II) UnloadModule: "evdev" [ 4448.516] (II) evdev: Power Button: Close [ 4448.516] (II) UnloadModule: "evdev" [ 4448.516] (II) evdev: Power Button: Close [ 4448.516] (II) UnloadModule: "evdev" [ 4448.539] 12 XSELINUXs still allocated at reset [ 4448.539] SCREEN: 0 objects of 196 bytes = 0 total bytes 0 private allocs [ 4448.539] DEVICE: 0 objects of 64 bytes = 0 total bytes 0 private allocs [ 4448.539] CLIENT: 0 objects of 152 bytes = 0 total bytes 0 private allocs [ 4448.539] WINDOW: 0 objects of 28 bytes = 0 total bytes 0 private allocs [ 4448.539] PIXMAP: 1 objects of 16 bytes = 16 total bytes 0 private allocs [ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs [ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4448.539] TOTAL: 6 objects, 52 bytes, 0 allocs [ 4448.539] 6 SELECTIONs still allocated at reset [ 4448.539] WINDOW: 0 objects of 28 bytes = 0 total bytes 0 private allocs [ 4448.539] PIXMAP: 1 objects of 16 bytes = 16 total bytes 0 private allocs [ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs [ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4448.539] TOTAL: 6 objects, 52 bytes, 0 allocs [ 4448.539] 1 PIXMAPs still allocated at reset [ 4448.539] PIXMAP: 1 objects of 16 bytes = 16 total bytes 0 private allocs [ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs [ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4448.539] TOTAL: 6 objects, 52 bytes, 0 allocs [ 4448.539] 4 GCs still allocated at reset [ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs [ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4448.539] TOTAL: 5 objects, 36 bytes, 0 allocs [ 4448.539] 1 CURSORs still allocated at reset [ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4448.542] TOTAL: 1 objects, 4 bytes, 0 allocs [ 4448.542] 1 CURSOR_BITSs still allocated at reset [ 4448.542] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4448.542] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4448.542] TOTAL: 0 objects, 0 bytes, 0 allocs [ 4448.543] (II) Open ACPI successful (/var/run/acpid.socket) [ 4448.543] (II) APM registered successfully [ 4448.543] (II) intel(0): [DRI2] Setup complete [ 4448.543] (II) intel(0): [DRI2] DRI driver: i965 [ 4448.543] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled [ 4448.551] (II) UXA(0): Driver registered support for the following operations: [ 4448.551] (II) solid [ 4448.551] (II) copy [ 4448.551] (II) composite (RENDER acceleration) [ 4448.551] (II) put_image [ 4448.551] (II) get_image [ 4448.551] (II) intel(0): Initializing HW Cursor [ 4448.551] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 4448.551] (==) intel(0): DPMS enabled [ 4448.551] (==) intel(0): Intel XvMC decoder enabled [ 4448.551] (II) intel(0): Set up textured video [ 4448.551] (II) intel(0): Set up overlay video [ 4448.551] (II) intel(0): [XvMC] i965_xvmc driver initialized. [ 4448.551] (II) intel(0): direct rendering: DRI2 Enabled [ 4448.551] (==) intel(0): hotplug detection: "enabled" [ 4448.572] (--) RandR disabled [ 4448.580] (II) SELinux: Disabled on system [ 4448.584] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 4448.584] (II) AIGLX: enabled GLX_INTEL_swap_event [ 4448.584] (II) AIGLX: enabled GLX_ARB_create_context [ 4448.584] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 4448.584] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 4448.584] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 4448.584] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 4448.584] (II) AIGLX: Loaded and initialized i965 [ 4448.584] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 4448.585] (II) intel(0): Setting screen physical size to 338 x 270 [ 4448.613] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 4448.613] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 4448.613] (II) Using input driver 'evdev' for 'Power Button' [ 4448.613] (**) Power Button: always reports core events [ 4448.613] (**) evdev: Power Button: Device: "/dev/input/event3" [ 4448.613] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 4448.613] (--) evdev: Power Button: Found keys [ 4448.613] (II) evdev: Power Button: Configuring as keyboard [ 4448.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 4448.613] (**) Option "xkb_rules" "evdev" [ 4448.614] (**) Option "xkb_model" "pc105" [ 4448.614] (**) Option "xkb_layout" "us" [ 4448.614] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 4448.614] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 4448.614] (II) Using input driver 'evdev' for 'Power Button' [ 4448.614] (**) Power Button: always reports core events [ 4448.614] (**) evdev: Power Button: Device: "/dev/input/event2" [ 4448.614] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 4448.614] (--) evdev: Power Button: Found keys [ 4448.614] (II) evdev: Power Button: Configuring as keyboard [ 4448.614] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 4448.614] (**) Option "xkb_rules" "evdev" [ 4448.614] (**) Option "xkb_model" "pc105" [ 4448.614] (**) Option "xkb_layout" "us" [ 4448.614] (II) config/udev: Adding drm device (/dev/dri/card0) [ 4448.614] (II) xfree86: Adding drm device (/dev/dri/card0) [ 4448.614] setversion 1.4 failed [ 4448.615] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 4448.615] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 4448.615] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 4448.615] (**) Logitech USB Optical Mouse: always reports core events [ 4448.615] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 4448.615] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b [ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons [ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 4448.615] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 4448.615] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 4448.615] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 4448.615] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4448.615] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1" [ 4448.615] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 4448.615] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 4448.615] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 4448.615] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 4448.615] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 4448.615] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 4448.615] (II) No input driver specified, ignoring this device. [ 4448.615] (II) This device may have been added with another device file. [ 4448.616] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) [ 4448.616] (II) No input driver specified, ignoring this device. [ 4448.616] (II) This device may have been added with another device file. [ 4448.616] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10) [ 4448.616] (II) No input driver specified, ignoring this device. [ 4448.616] (II) This device may have been added with another device file. [ 4448.616] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11) [ 4448.616] (II) No input driver specified, ignoring this device. [ 4448.616] (II) This device may have been added with another device file. [ 4448.616] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12) [ 4448.616] (II) No input driver specified, ignoring this device. [ 4448.616] (II) This device may have been added with another device file. [ 4448.616] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13) [ 4448.616] (II) No input driver specified, ignoring this device. [ 4448.617] (II) This device may have been added with another device file. [ 4448.617] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14) [ 4448.617] (II) No input driver specified, ignoring this device. [ 4448.617] (II) This device may have been added with another device file. [ 4448.617] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6) [ 4448.617] (II) No input driver specified, ignoring this device. [ 4448.617] (II) This device may have been added with another device file. [ 4448.617] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7) [ 4448.617] (II) No input driver specified, ignoring this device. [ 4448.617] (II) This device may have been added with another device file. [ 4448.617] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8) [ 4448.617] (II) No input driver specified, ignoring this device. [ 4448.617] (II) This device may have been added with another device file. [ 4448.618] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9) [ 4448.618] (II) No input driver specified, ignoring this device. [ 4448.618] (II) This device may have been added with another device file. [ 4448.618] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 4448.618] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 4448.618] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 4448.618] (**) AT Translated Set 2 keyboard: always reports core events [ 4448.618] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 4448.618] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 4448.618] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 4448.618] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 4448.618] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 4448.618] (**) Option "xkb_rules" "evdev" [ 4448.618] (**) Option "xkb_model" "pc105" [ 4448.618] (**) Option "xkb_layout" "us" [ 4448.619] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 4448.619] (II) No input driver specified, ignoring this device. [ 4448.619] (II) This device may have been added with another device file. [ 4473.248] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 4473.248] (II) intel(0): Using hsync ranges from config file [ 4473.248] (II) intel(0): Using vrefresh ranges from config file [ 4473.248] (II) intel(0): Printing DDC gathered Modelines: [ 4473.248] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 4473.248] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4473.248] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4473.248] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4473.248] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4505.108] (II) AIGLX: Suspending AIGLX clients for VT switch [ 4539.459] (II) evdev: AT Translated Set 2 keyboard: Close [ 4539.459] (II) UnloadModule: "evdev" [ 4539.459] (II) evdev: Logitech USB Optical Mouse: Close [ 4539.459] (II) UnloadModule: "evdev" [ 4539.459] (II) evdev: Power Button: Close [ 4539.459] (II) UnloadModule: "evdev" [ 4539.459] (II) evdev: Power Button: Close [ 4539.459] (II) UnloadModule: "evdev" [ 4539.481] 7 XSELINUXs still allocated at reset [ 4539.481] SCREEN: 0 objects of 196 bytes = 0 total bytes 0 private allocs [ 4539.481] DEVICE: 0 objects of 64 bytes = 0 total bytes 0 private allocs [ 4539.481] CLIENT: 0 objects of 152 bytes = 0 total bytes 0 private allocs [ 4539.481] WINDOW: 0 objects of 28 bytes = 0 total bytes 0 private allocs [ 4539.481] PIXMAP: 2 objects of 16 bytes = 32 total bytes 0 private allocs [ 4539.481] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs [ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4539.481] TOTAL: 7 objects, 68 bytes, 0 allocs [ 4539.481] 2 PIXMAPs still allocated at reset [ 4539.481] PIXMAP: 2 objects of 16 bytes = 32 total bytes 0 private allocs [ 4539.481] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs [ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4539.481] TOTAL: 7 objects, 68 bytes, 0 allocs [ 4539.481] 4 GCs still allocated at reset [ 4539.481] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs [ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4539.481] TOTAL: 5 objects, 36 bytes, 0 allocs [ 4539.481] 1 CURSORs still allocated at reset [ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs [ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4539.481] TOTAL: 1 objects, 4 bytes, 0 allocs [ 4539.483] 1 CURSOR_BITSs still allocated at reset [ 4539.483] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs [ 4539.483] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs [ 4539.483] TOTAL: 0 objects, 0 bytes, 0 allocs [ 4539.484] (II) Open ACPI successful (/var/run/acpid.socket) [ 4539.484] (II) APM registered successfully [ 4539.484] (II) intel(0): [DRI2] Setup complete [ 4539.484] (II) intel(0): [DRI2] DRI driver: i965 [ 4539.484] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled [ 4539.491] (II) UXA(0): Driver registered support for the following operations: [ 4539.491] (II) solid [ 4539.491] (II) copy [ 4539.491] (II) composite (RENDER acceleration) [ 4539.491] (II) put_image [ 4539.491] (II) get_image [ 4539.491] (II) intel(0): Initializing HW Cursor [ 4539.491] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 4539.492] (==) intel(0): DPMS enabled [ 4539.492] (==) intel(0): Intel XvMC decoder enabled [ 4539.492] (II) intel(0): Set up textured video [ 4539.492] (II) intel(0): Set up overlay video [ 4539.492] (II) intel(0): [XvMC] i965_xvmc driver initialized. [ 4539.492] (II) intel(0): direct rendering: DRI2 Enabled [ 4539.492] (==) intel(0): hotplug detection: "enabled" [ 4539.512] (--) RandR disabled [ 4539.519] (II) SELinux: Disabled on system [ 4539.522] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 4539.527] (II) AIGLX: enabled GLX_INTEL_swap_event [ 4539.527] (II) AIGLX: enabled GLX_ARB_create_context [ 4539.527] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 4539.527] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 4539.527] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 4539.527] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 4539.527] (II) AIGLX: Loaded and initialized i965 [ 4539.527] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 4539.528] (II) intel(0): Setting screen physical size to 338 x 270 [ 4539.557] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 4539.557] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 4539.557] (II) Using input driver 'evdev' for 'Power Button' [ 4539.557] (**) Power Button: always reports core events [ 4539.557] (**) evdev: Power Button: Device: "/dev/input/event3" [ 4539.557] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 4539.557] (--) evdev: Power Button: Found keys [ 4539.557] (II) evdev: Power Button: Configuring as keyboard [ 4539.557] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 4539.557] (**) Option "xkb_rules" "evdev" [ 4539.557] (**) Option "xkb_model" "pc105" [ 4539.557] (**) Option "xkb_layout" "us" [ 4539.558] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 4539.558] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 4539.558] (II) Using input driver 'evdev' for 'Power Button' [ 4539.558] (**) Power Button: always reports core events [ 4539.558] (**) evdev: Power Button: Device: "/dev/input/event2" [ 4539.558] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 4539.558] (--) evdev: Power Button: Found keys [ 4539.558] (II) evdev: Power Button: Configuring as keyboard [ 4539.558] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2" [ 4539.558] (**) Option "xkb_rules" "evdev" [ 4539.558] (**) Option "xkb_model" "pc105" [ 4539.558] (**) Option "xkb_layout" "us" [ 4539.558] (II) config/udev: Adding drm device (/dev/dri/card0) [ 4539.558] (II) xfree86: Adding drm device (/dev/dri/card0) [ 4539.558] setversion 1.4 failed [ 4539.559] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 4539.559] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 4539.559] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 4539.559] (**) Logitech USB Optical Mouse: always reports core events [ 4539.559] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 4539.559] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b [ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons [ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 4539.559] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 4539.559] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 4539.559] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 4539.559] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4539.559] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1" [ 4539.559] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 4539.559] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 4539.559] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 4539.559] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 4539.559] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 4539.559] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 4539.559] (II) No input driver specified, ignoring this device. [ 4539.559] (II) This device may have been added with another device file. [ 4539.559] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) [ 4539.559] (II) No input driver specified, ignoring this device. [ 4539.559] (II) This device may have been added with another device file. [ 4539.560] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10) [ 4539.560] (II) No input driver specified, ignoring this device. [ 4539.560] (II) This device may have been added with another device file. [ 4539.560] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11) [ 4539.560] (II) No input driver specified, ignoring this device. [ 4539.560] (II) This device may have been added with another device file. [ 4539.560] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12) [ 4539.560] (II) No input driver specified, ignoring this device. [ 4539.560] (II) This device may have been added with another device file. [ 4539.561] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13) [ 4539.561] (II) No input driver specified, ignoring this device. [ 4539.561] (II) This device may have been added with another device file. [ 4539.561] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14) [ 4539.561] (II) No input driver specified, ignoring this device. [ 4539.561] (II) This device may have been added with another device file. [ 4539.561] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6) [ 4539.561] (II) No input driver specified, ignoring this device. [ 4539.561] (II) This device may have been added with another device file. [ 4539.561] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7) [ 4539.561] (II) No input driver specified, ignoring this device. [ 4539.561] (II) This device may have been added with another device file. [ 4539.562] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8) [ 4539.562] (II) No input driver specified, ignoring this device. [ 4539.562] (II) This device may have been added with another device file. [ 4539.562] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9) [ 4539.562] (II) No input driver specified, ignoring this device. [ 4539.562] (II) This device may have been added with another device file. [ 4539.562] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 4539.562] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 4539.562] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 4539.562] (**) AT Translated Set 2 keyboard: always reports core events [ 4539.562] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 4539.562] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 4539.562] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 4539.562] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 4539.563] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 4539.563] (**) Option "xkb_rules" "evdev" [ 4539.563] (**) Option "xkb_model" "pc105" [ 4539.563] (**) Option "xkb_layout" "us" [ 4539.563] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 4539.563] (II) No input driver specified, ignoring this device. [ 4539.563] (II) This device may have been added with another device file. [ 4541.972] (II) AIGLX: Suspending AIGLX clients for VT switch [ 4602.248] (II) Open ACPI successful (/var/run/acpid.socket) [ 4602.248] (II) AIGLX: Resuming AIGLX clients after VT switch [ 4602.346] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 4602.346] (II) intel(0): Using hsync ranges from config file [ 4602.346] (II) intel(0): Using vrefresh ranges from config file [ 4602.346] (II) intel(0): Printing DDC gathered Modelines: [ 4602.346] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 4602.346] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4602.346] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4602.346] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4602.346] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4626.228] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 4626.228] (II) intel(0): Using hsync ranges from config file [ 4626.228] (II) intel(0): Using vrefresh ranges from config file [ 4626.228] (II) intel(0): Printing DDC gathered Modelines: [ 4626.228] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 4626.228] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4626.228] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4626.228] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4626.228] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4630.240] (II) AIGLX: Suspending AIGLX clients for VT switch [ 4696.406] (II) Open ACPI successful (/var/run/acpid.socket) [ 4696.406] (II) AIGLX: Resuming AIGLX clients after VT switch [ 4696.510] (II) intel(0): EDID vendor "ENC", prod id 5767 [ 4696.510] (II) intel(0): Using hsync ranges from config file [ 4696.510] (II) intel(0): Using vrefresh ranges from config file [ 4696.510] (II) intel(0): Printing DDC gathered Modelines: [ 4696.510] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 4696.510] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4696.510] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4696.510] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4696.510] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=100000 0 0 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: USEC_INITIALIZED=44505 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3 E: DMI_VENDOR=System manufacturer E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=3873 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=100000 0 0 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: USEC_INITIALIZED=33842 P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2 N: input/event2 E: BACKSPACE=guess E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2 E: DMI_VENDOR=System manufacturer E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: TAGS=:power-switch: E: USEC_INITIALIZED=3350 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1 E: DEVPATH=/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1 E: EV=17 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_Optical_Mouse E: ID_MODEL_ENC=USB\x20Optical\x20Mouse E: ID_MODEL_ID=c05b E: ID_PATH=pci-0000:00:1a.2-usb-0:1:1.0 E: ID_PATH_TAG=pci-0000_00_1a_2-usb-0_1_1_0 E: ID_REVISION=5400 E: ID_SERIAL=Logitech_USB_Optical_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: KEY=ff0000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0003v046DpC05Be0111-e0,1,2,4,k110,111,112,113,114,115,116,117,r0,1,6,8,am4,lsfw E: MSC=10 E: NAME="Logitech USB Optical Mouse" E: PHYS="usb-0000:00:1a.2-1/input0" E: PRODUCT=3/46d/c05b/111 E: PROP=0 E: REL=143 E: SUBSYSTEM=input E: UNIQ="" E: USEC_INITIALIZED=75793 P: /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1 N: input/event1 S: input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse S: input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-event-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse /dev/input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-event-mouse E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_Optical_Mouse E: ID_MODEL_ENC=USB\x20Optical\x20Mouse E: ID_MODEL_ID=c05b E: ID_PATH=pci-0000:00:1a.2-usb-0:1:1.0 E: ID_PATH_TAG=pci-0000_00_1a_2-usb-0_1_1_0 E: ID_REVISION=5400 E: ID_SERIAL=Logitech_USB_Optical_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: USEC_INITIALIZED=2541 P: /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/mouse0 N: input/mouse0 S: input/by-id/usb-Logitech_USB_Optical_Mouse-mouse S: input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-mouse E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse /dev/input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/mouse0 E: ID_BUS=usb E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_MODEL=USB_Optical_Mouse E: ID_MODEL_ENC=USB\x20Optical\x20Mouse E: ID_MODEL_ID=c05b E: ID_PATH=pci-0000:00:1a.2-usb-0:1:1.0 E: ID_PATH_TAG=pci-0000_00_1a_2-usb-0_1_1_0 E: ID_REVISION=5400 E: ID_SERIAL=Logitech_USB_Optical_Mouse E: ID_TYPE=hid E: ID_USB_DRIVER=usbhid E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: USEC_INITIALIZED=75813 P: /devices/pci0000:00/0000:00:1b.0/input/input5 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5 E: EV=40001 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0001v10ECp0883e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PRODUCT=1/10ec/883/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: USEC_INITIALIZED=78676 P: /devices/pci0000:00/0000:00:1b.0/input/input5/event5 N: input/event5 E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5/event5 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: USEC_INITIALIZED=78712 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6, E: NAME="HDA Intel Line Out Surround" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=40 E: USEC_INITIALIZED=91193 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10 N: input/event10 E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: USEC_INITIALIZED=91245 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6, E: NAME="HDA Intel Line Out Front" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=40 E: USEC_INITIALIZED=91292 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11 N: input/event11 E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: USEC_INITIALIZED=91344 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD, E: NAME="HDA Intel Line" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=2000 E: USEC_INITIALIZED=91391 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12 N: input/event12 E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: USEC_INITIALIZED=91444 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: NAME="HDA Intel Rear Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=10 E: USEC_INITIALIZED=91493 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13 N: input/event13 E: DEVNAME=/dev/input/event13 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=77 E: SUBSYSTEM=input E: USEC_INITIALIZED=91546 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4, E: NAME="HDA Intel Front Mic" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=10 E: USEC_INITIALIZED=91593 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14 N: input/event14 E: DEVNAME=/dev/input/event14 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=78 E: SUBSYSTEM=input E: USEC_INITIALIZED=91644 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8, E: NAME="HDA Intel HDMI/DP,pcm=3" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=140 E: USEC_INITIALIZED=90775 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6 N: input/event6 E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: USEC_INITIALIZED=90835 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2, E: NAME="HDA Intel Front Headphone" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=4 E: USEC_INITIALIZED=90885 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7 N: input/event7 E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: USEC_INITIALIZED=90940 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6, E: NAME="HDA Intel Line Out Side" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=40 E: USEC_INITIALIZED=90989 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8 N: input/event8 E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: USEC_INITIALIZED=91044 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9 E: EV=21 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6, E: NAME="HDA Intel Line Out CLFE" E: PHYS="ALSA" E: PRODUCT=0/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=40 E: USEC_INITIALIZED=91092 P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9 N: input/event9 E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: USEC_INITIALIZED=91144 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: USEC_INITIALIZED=9234 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: DMI_VENDOR=System manufacturer E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: USEC_INITIALIZED=99541 E: XKBLAYOUT=us E: XKBMODEL=pc105 P: /devices/platform/pcspkr/input/input4 E: DEVPATH=/devices/platform/pcspkr/input/input4 E: EV=40001 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: USEC_INITIALIZED=52257 P: /devices/platform/pcspkr/input/input4/event4 N: input/event4 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/platform/pcspkr/input/input4/event4 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: USEC_INITIALIZED=53235 DRM Information from dmesg: --------------------------- [ 6.092964] [drm] Initialized drm 1.1.0 20060810 [ 6.106877] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2982 flags=is_broadwater,has_hotplug,has_overlay, [ 6.106927] [drm] Memory usable by graphics device = 512M [ 6.106930] [drm:i915_gem_gtt_init], GMADR size = 256M [ 6.106931] [drm:i915_gem_gtt_init], GTT stolen size = 8M [ 6.107062] [drm:intel_opregion_setup], graphic opregion physical addr: 0xcf78e0f4 [ 6.107069] [drm:intel_opregion_setup], Public ACPI methods supported [ 6.107071] [drm:intel_opregion_setup], SWSCI supported [ 6.107072] [drm:intel_opregion_setup], ASLE supported [ 6.107108] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.107110] [drm] Driver supports precise vblank timestamp query. [ 6.107111] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 6.107114] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT BROADWATER-G d [ 6.107116] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 6.107119] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 6.107122] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 6.107123] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 6.107126] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 6.107128] [drm:parse_device_mapping], no child dev is parsed from VBT [ 6.107133] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 6.107138] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at cf800000 [ 6.107163] [drm:intel_modeset_init], 2 display pipes available. [ 6.107168] [drm:intel_modeset_init], pipe 0 plane 0 init failed: -19 [ 6.107174] [drm:intel_modeset_init], pipe 1 plane 0 init failed: -19 [ 6.107176] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation [ 6.107510] [drm:intel_setup_outputs], probing SDVOB [ 6.107513] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 6.222196] [drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) [ 6.223710] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 04 AE 00 02 01 01 01 00 [ 6.237064] [drm:intel_sdvo_get_capabilities], SDVO capabilities: [ 6.237070] [drm:intel_sdvo_debug_write], SDVOB: W: 0C (SDVO_CMD_GET_HOT_PLUG_SUPPORT) [ 6.238585] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.243936] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG) [ 6.246796] [drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE) [ 6.248318] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 12 [ 6.251752] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) [ 6.255747] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.257067] [drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE) [ 6.258590] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 74 40 [ 6.263420] [drm:intel_sdvo_init], SDVOB device VID/DID: 04:AE.00, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N [ 6.263425] [drm:intel_setup_outputs], probing SDVOC [ 6.263427] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2 [ 6.263709] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 6.263711] [drm:intel_sdvo_init], No SDVO device found on SDVOC [ 6.263733] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1 [ 6.263738] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 1ffff000] [ 6.266941] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 6.267066] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 6.267119] [drm:i915_gem_object_create_stolen], creating stolen object: size=1000 [ 6.267122] [drm:i915_pages_create_for_stolen], offset=0x20000, size=4096 [ 6.267276] [drm] initialized overlay support [ 6.267279] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: enabled [ 6.267282] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: enabled [ 6.267284] [drm:intel_modeset_setup_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe=0 [ 6.267287] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.268987] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.272197] [drm:intel_modeset_setup_hw_state], [ENCODER:7:TMDS-7] hw state readout: enabled, pipe=0 [ 6.272200] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled [ 6.272292] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.274018] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.277192] [drm:intel_modeset_setup_hw_state], [CONNECTOR:8:HDMI-A-1] hw state readout: enabled [ 6.284021] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 6.284026] [drm:intel_sanitize_crtc], [CRTC:4] hw state adjusted, was enabled, now disabled [ 6.284031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.285628] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.288271] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1] [ 6.288360] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.289891] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.292746] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 6.292749] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 6.292789] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.294314] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.297657] [drm:intel_modeset_check_state], [CRTC:3] [ 6.297660] [drm:intel_modeset_check_state], [CRTC:4] [ 6.297668] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 6.320295] [drm:intel_crt_detect], CRT not detected via hotplug [ 6.344103] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 6.344107] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 6.344109] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 6.344111] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 6.344367] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 6.344369] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 6.344371] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 6.344374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 6.344377] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 6.344380] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 6.345891] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.348518] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 6.349009] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 6.352459] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 6.381966] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 6.386957] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 6.415584] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 6.417151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 6.417154] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 6.417158] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 6.417161] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 6.417164] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 6.417166] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 6.417170] [drm:drm_setup_crtcs], [ 6.417172] [drm:drm_enable_connectors], connector 5 enabled? no [ 6.417174] [drm:drm_enable_connectors], connector 8 enabled? yes [ 6.417176] [drm:drm_target_preferred], looking for cmdline mode on connector 8 [ 6.417177] [drm:drm_target_preferred], looking for preferred mode on connector 8 [ 6.417179] [drm:drm_target_preferred], found mode 1280x1024 [ 6.417181] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 6.417184] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3 [ 6.417187] [drm:i915_gem_object_create_stolen], creating stolen object: size=500000 [ 6.417192] [drm:i915_pages_create_for_stolen], offset=0x21000, size=5242880 [ 6.418576] [drm:intelfb_create], allocated 1280x1024 fb: 0x00040000, bo f74a5ec0 [ 6.418646] fbcon: inteldrmfb (fb0) is primary device [ 6.419692] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 6.419694] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 6.419695] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 6.419697] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 6.419700] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 6.419702] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 6.419703] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 6.419705] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 6.419708] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO [ 6.419710] [drm:intel_modeset_pipe_config], [CRTC:3] [ 6.419711] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 6.419713] [drm:__intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 6.419717] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 6.423358] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.428020] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000 [ 6.428024] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 6.428427] [drm:i9xx_crtc_mode_set], Mode for pipe A: [ 6.428430] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 6.452016] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120 [ 6.452019] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 6.452022] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024] [ 6.452026] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP) [ 6.456856] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed [ 6.456859] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT) [ 6.460466] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.460799] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) [ 6.468195] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed [ 6.468196] [drm] Setting output timings on SDVOB failed [ 6.468200] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) [ 6.471176] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.471179] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE) [ 6.475251] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.475532] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) [ 6.483137] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.483214] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) [ 6.490534] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.490537] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT) [ 6.493544] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.493549] [drm:i965_update_wm], self-refresh entries: 80, wm: 432 [ 6.493551] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32 [ 6.493552] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432 [ 6.532030] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) [ 6.535494] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 [ 6.535498] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 6.539560] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 6.539565] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.544213] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.544215] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1] [ 6.544222] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.548625] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.548627] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 6.548629] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 6.548632] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 6.552717] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 6.552719] [drm:intel_modeset_check_state], [CRTC:3] [ 6.552720] [drm:intel_modeset_check_state], [CRTC:4] [ 6.552723] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 6.552726] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 6.552757] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 6.552760] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 6.558870] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 6.558872] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 6.565037] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.565092] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 9.521671] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 9.521676] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.194274] [drm:i915_driver_open], [ 18.194302] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 18.194307] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.194310] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 18.194312] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.206273] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 18.206277] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.212691] [drm:i915_driver_open], [ 18.212701] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 18.213531] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 18.213536] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.213538] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 18.213541] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.213603] [drm:i915_driver_open], [ 18.213610] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 18.213613] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 18.213622] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 18.213625] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.213627] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 18.213629] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.214389] [drm:i915_driver_open], [ 18.214401] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 18.214405] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.214407] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 18.214409] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.214418] [drm:i915_driver_open], [ 18.214534] [drm:i915_getparam], Unknown parameter 22 [ 18.215102] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 18.215107] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2] [ 18.215146] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.215149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 18.220064] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.225164] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 18.225168] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.225170] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 18.225172] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 18.225428] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.225429] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 18.225431] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 18.225434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 18.225442] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.225444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 18.232022] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.236050] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 18.236054] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.236056] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 18.236058] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 18.236311] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.236313] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 18.236315] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 18.236317] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 18.236362] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 18.236365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 18.236368] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 18.237863] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 18.240480] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 18.240764] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.243735] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.272013] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.274984] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.302819] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 18.302899] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 18.302902] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 18.302905] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 18.302908] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 18.302911] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 18.302914] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 18.302921] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 18.302969] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.302972] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 18.308019] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.312077] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 18.312082] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.312085] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 18.312088] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 18.312342] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.312344] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 18.312347] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 18.312351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 18.312360] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 18.312363] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 18.320013] [drm:intel_crt_detect], CRT not detected via hotplug [ 18.324070] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 18.324074] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.324077] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 18.324079] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 18.324333] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 18.324335] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 18.324338] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 18.324341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 18.324397] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 18.324402] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 18.324405] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 18.325899] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 18.328521] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 18.328897] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.331878] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.366757] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.370174] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 18.398070] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 18.398950] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 18.398953] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 18.398956] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 18.398959] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 18.398962] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 18.398965] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 18.398974] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 18.414616] [drm:drm_mode_addfb], [FB:18] [ 18.414687] [drm:drm_mode_setcrtc], [CRTC:3] [ 18.414691] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1] [ 18.414693] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 18.414697] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.418985] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 18.432036] [drm:drm_mode_setcrtc], [CRTC:4] [ 18.432039] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 18.432042] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 18.456283] [drm:i915_getparam], Unknown parameter 22 [ 146.788152] [drm:intel_crtc_cursor_set], cursor off [ 151.559681] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 151.561202] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 151.563806] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 151.563809] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 151.566868] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 151.600029] [drm:intel_crt_detect], CRT not detected via hotplug [ 151.606811] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 151.606816] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 151.606819] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 151.606821] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 151.607077] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 151.607080] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 151.607083] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 166.014694] [drm:i915_driver_open], [ 166.015951] [drm:i915_getparam], Unknown parameter 22 [ 166.080967] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 166.080973] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 166.088022] [drm:intel_crt_detect], CRT not detected via hotplug [ 166.092082] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 166.092087] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 166.092089] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 166.092091] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 166.092344] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 166.092346] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 166.092348] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 166.092351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 166.092360] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 166.092362] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 166.100021] [drm:intel_crt_detect], CRT not detected via hotplug [ 166.104085] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 166.104089] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 166.104092] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 166.104094] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 166.104350] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 166.104352] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 166.104354] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 166.104357] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 166.104389] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 166.104392] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 166.104396] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 166.105913] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 166.108566] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 166.108843] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 166.111866] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 166.140649] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 166.143647] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 166.172552] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 166.175323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 166.175327] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 166.175331] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 166.175334] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 166.175337] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 166.175339] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 166.175358] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 217.298283] [drm:intel_crtc_cursor_set], cursor off [ 641.523213] [drm:intel_crtc_cursor_set], cursor off [ 704.156134] [drm:intel_crtc_cursor_set], cursor off [ 748.524594] [drm:intel_crtc_cursor_set], cursor off [ 842.203972] [drm:intel_crtc_cursor_set], cursor off [ 926.288085] [drm:intel_crtc_cursor_set], cursor off [ 1057.296889] [drm:intel_crtc_cursor_set], cursor off [ 1100.260212] [drm:intel_crtc_cursor_set], cursor off [ 1190.968882] [drm:intel_crtc_cursor_set], cursor off [ 1216.583292] [drm:intel_crtc_cursor_set], cursor off [ 1236.263589] [drm:intel_crtc_cursor_set], cursor off [ 1245.510984] [drm:intel_crtc_cursor_set], cursor off [ 1304.759922] [drm:intel_crtc_cursor_set], cursor off [ 1362.010930] [drm:intel_crtc_cursor_set], cursor off [ 1407.088235] [drm:intel_crtc_cursor_set], cursor off [ 1573.340801] [drm:intel_crtc_cursor_set], cursor off [ 1640.283790] [drm:intel_crtc_cursor_set], cursor off [ 1719.557802] [drm:intel_crtc_cursor_set], cursor off [ 1743.512386] [drm:intel_crtc_cursor_set], cursor off [ 1802.522774] [drm:intel_crtc_cursor_set], cursor off [ 2068.515973] [drm:intel_crtc_cursor_set], cursor off [ 2181.610195] [drm:intel_crtc_cursor_set], cursor off [ 2323.592746] [drm:intel_crtc_cursor_set], cursor off [ 2520.551158] [drm:intel_crtc_cursor_set], cursor off [ 2568.178965] [drm:intel_crtc_cursor_set], cursor off [ 2583.903953] [drm:intel_crtc_cursor_set], cursor off [ 2770.621058] [drm:intel_crtc_cursor_set], cursor off [ 2792.216573] [drm:intel_crtc_cursor_set], cursor off [ 2806.102207] [drm:intel_crtc_cursor_set], cursor off [ 2818.782233] [drm:intel_crtc_cursor_set], cursor off [ 2832.775200] [drm:intel_crtc_cursor_set], cursor off [ 2840.452288] [drm:intel_crtc_cursor_set], cursor off [ 2860.167627] [drm:intel_crtc_cursor_set], cursor off [ 2866.887706] [drm:intel_crtc_cursor_set], cursor off [ 2904.120326] [drm:intel_crtc_cursor_set], cursor off [ 2939.937225] [drm:intel_crtc_cursor_set], cursor off [ 2948.778201] [drm:intel_crtc_cursor_set], cursor off [ 2971.468831] [drm:intel_crtc_cursor_set], cursor off [ 2979.226592] [drm:intel_crtc_cursor_set], cursor off [ 3030.443549] [drm:intel_crtc_cursor_set], cursor off [ 3040.299733] [drm:intel_crtc_cursor_set], cursor off [ 3077.576574] [drm:intel_crtc_cursor_set], cursor off [ 3160.131167] [drm:intel_crtc_cursor_set], cursor off [ 3175.224725] [drm:intel_crtc_cursor_set], cursor off [ 3254.763648] [drm:intel_crtc_cursor_set], cursor off [ 3358.266357] [drm:intel_crtc_cursor_set], cursor off [ 3576.370899] [drm:intel_crtc_cursor_set], cursor off [ 3590.168806] [drm:intel_crtc_cursor_set], cursor off [ 3614.408492] [drm:intel_crtc_cursor_set], cursor off [ 3621.573140] [drm:intel_crtc_cursor_set], cursor off [ 3639.913068] [drm:intel_crtc_cursor_set], cursor off [ 3692.209019] [drm:intel_crtc_cursor_set], cursor off [ 3933.663671] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 3933.666411] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 3933.667285] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 3933.670023] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 3933.700011] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000 [ 3933.700017] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 3933.700022] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 3933.701517] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 3933.704131] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 3933.704134] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 3933.704143] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 3933.705636] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 3933.708253] [drm:intel_modeset_check_state], [CRTC:3] [ 3933.708256] [drm:intel_modeset_check_state], [CRTC:4] [ 3954.716625] [drm:i965_update_wm], self-refresh entries: 80, wm: 432 [ 3954.716630] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32 [ 3954.716633] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432 [ 3954.772023] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) [ 3954.773523] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 [ 3954.775264] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 3954.778005] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 3954.778883] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 3954.781622] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 3954.782495] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 3954.783989] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 3954.786604] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1] [ 3954.786607] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 3954.788105] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 3954.790717] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 3954.790719] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 3954.790721] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 3954.792215] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 3954.794816] [drm:intel_modeset_check_state], [CRTC:3] [ 3954.794818] [drm:intel_modeset_check_state], [CRTC:4] [ 3968.710486] [drm:intel_crtc_cursor_set], cursor off [ 3968.956122] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 3968.956127] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 3968.956133] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120 [ 3968.964023] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 3968.964026] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 3968.964029] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 3968.964032] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 3968.964039] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 3968.964042] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 3994.353752] [drm:drm_mode_setcrtc], [CRTC:3] [ 3994.353761] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1] [ 3994.353764] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 3994.353769] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 3994.353776] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 3994.360057] [drm:drm_mode_setcrtc], [CRTC:4] [ 3994.360062] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 3994.360066] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 3994.360130] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3994.360133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 3994.368019] [drm:intel_crt_detect], CRT not detected via hotplug [ 3994.372016] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3994.372021] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3994.372027] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3994.372029] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3994.372284] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3994.372286] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3994.372289] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3994.372292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 3994.372300] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3994.372303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 3994.380011] [drm:intel_crt_detect], CRT not detected via hotplug [ 3994.384012] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3994.384016] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3994.384019] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3994.384021] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3994.384274] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3994.384277] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3994.384280] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3994.384282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 3994.384296] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 3994.384299] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 3994.384303] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 3994.385797] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 3994.388414] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 3994.388423] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 3994.391403] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 3994.419299] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 3994.422288] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 3994.450050] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 3994.450065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 3994.450067] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 3994.450071] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3994.450074] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 3994.450076] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 3994.450079] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 3994.450085] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 3994.450786] [drm:i915_driver_open], [ 4035.287984] [drm:intel_crtc_cursor_set], cursor off [ 4035.508185] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4035.508190] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4035.508196] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120 [ 4035.532014] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4035.532017] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4035.532021] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4035.532023] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4035.532032] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4035.532035] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4037.484374] [drm:drm_mode_setcrtc], [CRTC:3] [ 4037.484381] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1] [ 4037.484384] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 4037.484389] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4037.484396] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 4037.492047] [drm:drm_mode_setcrtc], [CRTC:4] [ 4037.492052] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4037.492056] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4037.492119] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4037.492123] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4037.500011] [drm:intel_crt_detect], CRT not detected via hotplug [ 4037.504014] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4037.504022] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4037.504025] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4037.504027] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4037.504283] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4037.504285] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4037.504288] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4037.504291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4037.504298] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4037.504301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4037.512008] [drm:intel_crt_detect], CRT not detected via hotplug [ 4037.516013] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4037.516019] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4037.516021] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4037.516024] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4037.516277] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4037.516279] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4037.516282] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4037.516285] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4037.516299] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4037.516303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 4037.516306] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4037.517800] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4037.520414] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4037.520423] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4037.523404] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4037.551292] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4037.554273] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4037.582028] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 4037.582047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 4037.582050] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4037.582053] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4037.582056] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4037.582059] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4037.582062] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4037.582067] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4285.813669] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 4285.816418] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4285.817291] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 4285.820029] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4285.844013] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000 [ 4285.844017] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 4285.844022] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4285.845516] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 4285.848130] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 4285.848133] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 4285.848142] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4285.849635] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 4285.852256] [drm:intel_modeset_check_state], [CRTC:3] [ 4285.852259] [drm:intel_modeset_check_state], [CRTC:4] [ 4375.838548] [drm:i965_update_wm], self-refresh entries: 80, wm: 432 [ 4375.838553] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32 [ 4375.838556] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432 [ 4375.892011] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) [ 4375.893509] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 [ 4375.895249] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 4375.897985] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4375.898863] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 4375.901601] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4375.902474] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4375.903967] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4375.906588] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1] [ 4375.906591] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4375.908086] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4375.910687] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 4375.910689] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 4375.910691] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4375.912182] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4375.914782] [drm:intel_modeset_check_state], [CRTC:3] [ 4375.914785] [drm:intel_modeset_check_state], [CRTC:4] [ 4375.914810] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 4375.917536] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4375.918409] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 4375.921135] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4375.944010] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000 [ 4375.944014] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 4375.944018] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4375.945513] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 4375.948130] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 4375.948133] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 4375.948141] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4375.949634] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 4375.952254] [drm:intel_modeset_check_state], [CRTC:3] [ 4375.952257] [drm:intel_modeset_check_state], [CRTC:4] [ 4408.275342] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A [ 4408.275344] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B [ 4409.010254] [drm:i915_redisable_vga], Something enabled VGA plane, disabling it [ 4409.010564] [drm:intel_opregion_setup], graphic opregion physical addr: 0xcf78e0f4 [ 4409.010574] [drm:intel_opregion_setup], Public ACPI methods supported [ 4409.010576] [drm:intel_opregion_setup], SWSCI supported [ 4409.010577] [drm:intel_opregion_setup], ASLE supported [ 4409.010581] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 4409.010584] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 4409.010614] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: disabled [ 4409.010616] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: disabled [ 4409.010619] [drm:intel_modeset_setup_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe=0 [ 4409.010623] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4409.014749] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 4409.014751] [drm:intel_modeset_setup_hw_state], [ENCODER:7:TMDS-7] hw state readout: disabled, pipe=0 [ 4409.014754] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled [ 4409.014757] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4409.018845] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00 [ 4409.018848] [drm:intel_modeset_setup_hw_state], [CONNECTOR:8:HDMI-A-1] hw state readout: disabled [ 4409.018852] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO [ 4409.018853] [drm:intel_modeset_pipe_config], [CRTC:3] [ 4409.018855] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0 [ 4409.018856] [drm:__intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 4409.019257] [drm:i9xx_crtc_mode_set], Mode for pipe A: [ 4409.019260] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4409.036030] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 4409.060018] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1 [ 4409.060022] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024] [ 4409.060028] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP) [ 4409.065184] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed [ 4409.065188] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT) [ 4409.068784] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4409.068789] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) [ 4409.076089] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed [ 4409.076090] [drm] Setting output timings on SDVOB failed [ 4409.076093] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) [ 4409.079061] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4409.079069] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE) [ 4409.082043] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4409.082050] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) [ 4409.089340] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4409.089344] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) [ 4409.096633] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4409.096637] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT) [ 4409.099603] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4409.099607] [drm:i965_update_wm], self-refresh entries: 80, wm: 432 [ 4409.099608] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32 [ 4409.099609] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432 [ 4409.140022] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) [ 4409.143238] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 [ 4409.143242] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) [ 4409.146827] [drm:intel_sdvo_read_response], SDVOB: R: (Success) [ 4409.146830] [drm:__intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 4409.146835] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4409.150918] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4409.150920] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1] [ 4409.150924] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4409.155007] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4409.155009] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6] [ 4409.155011] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7] [ 4409.155014] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) [ 4409.159098] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4409.159100] [drm:intel_modeset_check_state], [CRTC:3] [ 4409.159101] [drm:intel_modeset_check_state], [CRTC:4] [ 4409.159104] [drm:intel_resume_hotplug], running encoder hotplug functions [ 4409.159108] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG) [ 4409.168013] [drm:intel_crt_detect], CRT not detected via hotplug [ 4409.172014] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4409.172015] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4409.172017] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4409.172019] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4409.172270] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4409.172272] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4409.172273] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4409.172275] [drm:drm_helper_hpd_irq_event], [CONNECTOR:5:VGA-1] status updated from unknown to disconnected [ 4409.172279] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4409.176365] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4409.176367] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4409.176371] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4409.179339] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4409.207084] [drm:drm_helper_hpd_irq_event], [CONNECTOR:8:HDMI-A-1] status updated from unknown to connected [ 4420.798419] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4420.798425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4420.804021] [drm:intel_crt_detect], CRT not detected via hotplug [ 4420.808023] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4420.808029] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4420.808031] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4420.808033] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4420.808290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4420.808292] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4420.808294] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4420.808297] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4420.808345] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4420.808348] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4420.816017] [drm:intel_crt_detect], CRT not detected via hotplug [ 4420.820019] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4420.820024] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4420.820026] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4420.820028] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4420.820280] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4420.820282] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4420.820284] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4420.820287] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4420.820347] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4420.820350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 4420.820353] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4420.822101] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4420.824716] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4420.824719] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4420.827722] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4420.856215] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4420.859186] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4420.887140] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 4420.887414] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 4420.887417] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4420.887420] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4420.887423] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4420.887426] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4420.887429] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4420.887519] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4421.375099] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4421.376637] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4421.382953] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4421.382958] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4421.387720] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4421.424041] [drm:intel_crt_detect], CRT not detected via hotplug [ 4421.428030] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4421.428037] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4421.428041] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4421.428043] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4421.428298] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4421.428301] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4421.428303] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4421.428919] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4421.430438] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4421.433112] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4421.433116] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4421.436106] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4421.472022] [drm:intel_crt_detect], CRT not detected via hotplug [ 4421.476024] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4421.476031] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4421.476034] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4421.476036] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4421.476290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4421.476293] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4421.476296] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4447.800207] [drm:intel_crtc_cursor_set], cursor off [ 4448.020184] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4448.020188] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.020195] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120 [ 4448.028020] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4448.028023] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.028025] [drm:drm_fb_helper_hotplug_event], [ 4448.028027] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4448.036021] [drm:intel_crt_detect], CRT not detected via hotplug [ 4448.040029] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4448.040031] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4448.040033] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4448.040035] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4448.040288] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4448.040289] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4448.040291] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4448.040292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4448.040294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 4448.040299] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4448.044397] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4448.044398] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4448.044402] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4448.047370] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4448.075148] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4448.078124] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4448.105922] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 4448.105942] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 4448.105945] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4448.105947] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4448.105949] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4448.105952] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4448.105954] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4448.105955] [drm:drm_setup_crtcs], [ 4448.105957] [drm:drm_enable_connectors], connector 5 enabled? no [ 4448.105958] [drm:drm_enable_connectors], connector 8 enabled? yes [ 4448.105960] [drm:drm_target_preferred], looking for cmdline mode on connector 8 [ 4448.105961] [drm:drm_target_preferred], looking for preferred mode on connector 8 [ 4448.105962] [drm:drm_target_preferred], found mode 1280x1024 [ 4448.105963] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 4448.105965] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3 [ 4448.105968] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4448.105970] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.105972] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4448.105974] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.105976] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4448.105978] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.105987] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4448.105989] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.551646] [drm:drm_mode_addfb], [FB:18] [ 4448.551706] [drm:drm_mode_setcrtc], [CRTC:3] [ 4448.551710] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1] [ 4448.551712] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 4448.551716] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.556656] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 4448.572059] [drm:drm_mode_setcrtc], [CRTC:4] [ 4448.572065] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4448.572070] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4448.584341] [drm:i915_getparam], Unknown parameter 22 [ 4448.614853] [drm:i915_driver_open], [ 4473.120850] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4473.120856] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4473.128027] [drm:intel_crt_detect], CRT not detected via hotplug [ 4473.132081] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4473.132086] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4473.132088] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4473.132090] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4473.132344] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4473.132346] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4473.132348] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4473.132351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4473.132405] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4473.132408] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4473.140217] [drm:intel_crt_detect], CRT not detected via hotplug [ 4473.144076] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4473.144080] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4473.144082] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4473.144084] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4473.144341] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4473.144343] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4473.144345] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4473.144348] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4473.144423] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4473.144426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 4473.144430] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4473.145938] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4473.148595] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4473.150697] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4473.154344] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4473.192087] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4473.204662] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4473.233067] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 4473.248065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 4473.248069] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4473.248072] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4473.248076] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4473.248078] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4473.248081] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4473.248214] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4505.027707] [drm:intel_crtc_cursor_set], cursor off [ 4505.108263] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4505.108268] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4505.108277] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120 [ 4505.124024] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4505.124028] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4505.124030] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4505.124033] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4505.124043] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4505.124045] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4539.492224] [drm:drm_mode_addfb], [FB:18] [ 4539.492293] [drm:drm_mode_setcrtc], [CRTC:3] [ 4539.492297] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1] [ 4539.492299] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 4539.492303] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4539.496665] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 4539.512054] [drm:drm_mode_setcrtc], [CRTC:4] [ 4539.512059] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4539.512062] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4539.522547] [drm:i915_getparam], Unknown parameter 22 [ 4539.558690] [drm:i915_driver_open], [ 4541.746456] [drm:intel_crtc_cursor_set], cursor off [ 4541.972160] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4541.972166] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4541.972172] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120 [ 4541.980015] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4541.980018] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4541.980021] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4541.980024] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4541.980033] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4541.980036] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4602.248540] [drm:drm_mode_setcrtc], [CRTC:3] [ 4602.248549] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1] [ 4602.248552] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 4602.248558] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4602.248565] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 4602.256043] [drm:drm_mode_setcrtc], [CRTC:4] [ 4602.256048] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4602.256052] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4602.256113] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4602.256116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4602.264009] [drm:intel_crt_detect], CRT not detected via hotplug [ 4602.268013] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4602.268018] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4602.268021] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4602.268023] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4602.268278] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4602.268280] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4602.268283] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4602.268286] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4602.268291] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4602.268294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4602.276012] [drm:intel_crt_detect], CRT not detected via hotplug [ 4602.280012] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4602.280016] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4602.280019] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4602.280021] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4602.280274] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4602.280277] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4602.280280] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4602.280282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4602.280298] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4602.280301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 4602.280305] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4602.281799] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4602.284414] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4602.284423] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4602.287403] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4602.315294] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4602.318272] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4602.346028] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 4602.346048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 4602.346050] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4602.346054] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4602.346057] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4602.346060] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4602.346062] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4602.346068] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4625.848087] [drm:intel_crtc_cursor_set], cursor off [ 4626.086400] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4626.086406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4626.092027] [drm:intel_crt_detect], CRT not detected via hotplug [ 4626.096084] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4626.096088] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4626.096090] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4626.096092] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4626.096351] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4626.096353] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4626.096355] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4626.096358] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4626.096366] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4626.096369] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4626.104076] [drm:intel_crt_detect], CRT not detected via hotplug [ 4626.108130] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4626.108135] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4626.108137] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4626.108139] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4626.108398] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4626.108400] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4626.108402] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4626.108405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4626.108434] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4626.108437] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 4626.108440] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4626.109940] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4626.112584] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4626.114085] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4626.117159] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4626.160709] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4626.163722] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4626.197952] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 4626.228398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 4626.228403] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4626.228406] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4626.228409] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4626.228412] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4626.228415] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4626.228455] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4629.819133] [drm:intel_crtc_cursor_set], cursor off [ 4630.240224] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4630.240228] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4630.240236] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120 [ 4630.248018] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4630.248022] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4630.248025] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4630.248027] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4630.248038] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0) [ 4630.248040] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4696.406149] [drm:drm_mode_setcrtc], [CRTC:3] [ 4696.406157] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1] [ 4696.406159] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 4696.406164] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4696.406171] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120 [ 4696.420060] [drm:drm_mode_setcrtc], [CRTC:4] [ 4696.420065] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 4696.420069] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3] [ 4696.420137] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4696.420140] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4696.428024] [drm:intel_crt_detect], CRT not detected via hotplug [ 4696.432085] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4696.432089] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4696.432092] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4696.432095] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4696.432350] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4696.432352] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4696.432355] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4696.432359] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4696.432368] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 4696.432372] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] [ 4696.440014] [drm:intel_crt_detect], CRT not detected via hotplug [ 4696.444019] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 4696.444026] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4696.444029] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 4696.444031] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 4696.444286] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 4696.444289] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 4696.444291] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 4696.444295] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected [ 4696.444320] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4696.444324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] [ 4696.444328] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) [ 4696.445822] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00 [ 4696.448448] [drm:intel_sdvo_detect], SDVO response 1 0 [1] [ 4696.448461] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4696.451442] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4696.479330] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4696.482318] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) [ 4696.510088] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1 [ 4696.510106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes : [ 4696.510108] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5 [ 4696.510111] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 4696.510114] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 4696.510117] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 4696.510120] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 4696.510126] [drm:drm_mode_getconnector], [CONNECTOR:8:?] [ 4723.675773] [drm:i915_driver_open], [ 4723.676204] [drm:i915_getparam], Unknown parameter 22 [ 5244.260870] [drm:intel_crtc_cursor_set], cursor off [ 5315.821281] [drm:intel_crtc_cursor_set], cursor off [ 5320.770240] [drm:intel_crtc_cursor_set], cursor off [ 5325.880584] [drm:intel_crtc_cursor_set], cursor off [ 5451.210146] [drm:intel_crtc_cursor_set], cursor off [ 5516.163486] [drm:intel_crtc_cursor_set], cursor off [ 5552.092073] [drm:intel_crtc_cursor_set], cursor off [ 5636.406447] [drm:intel_crtc_cursor_set], cursor off [ 5646.396339] [drm:intel_crtc_cursor_set], cursor off [ 5653.928227] [drm:intel_crtc_cursor_set], cursor off [ 5668.944010] [drm:intel_crtc_cursor_set], cursor off [ 5677.323217] [drm:intel_crtc_cursor_set], cursor off [ 5695.543803] [drm:intel_crtc_cursor_set], cursor off [ 5707.965719] [drm:intel_crtc_cursor_set], cursor off [ 5709.719930] [drm:intel_crtc_cursor_set], cursor off [ 5728.769802] [drm:intel_crtc_cursor_set], cursor off [ 5733.775275] [drm:intel_crtc_cursor_set], cursor off [ 5838.001522] [drm:intel_crtc_cursor_set], cursor off [ 5850.610621] [drm:intel_crtc_cursor_set], cursor off [ 5850.977019] [drm:intel_crtc_cursor_set], cursor off [ 5851.697818] [drm:intel_crtc_cursor_set], cursor off [ 5853.157021] [drm:intel_crtc_cursor_set], cursor off [ 5876.501989] [drm:intel_crtc_cursor_set], cursor off [ 5920.638497] [drm:intel_crtc_cursor_set], cursor off [ 5922.508929] [drm:intel_crtc_cursor_set], cursor off -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (600, 'testing'), (500, 'stable'), (300, 'unstable'), (250, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.10-3-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.17-93 ii libdrm-intel1 2.4.46-3 ii libdrm2 2.4.46-3 ii libpciaccess0 0.13.2-1 ii libpixman-1-0 0.30.2-1 ii libudev1 204-5 ii libx11-6 2:1.6.2-1 ii libx11-xcb1 2:1.6.2-1 ii libxcb-dri2-0 1.9.1-3 ii libxcb-util0 0.3.8-2 ii libxcb1 1.9.1-3 ii libxv1 2:1.0.9-1 ii libxvmc1 2:1.0.8-1 ii xserver-xorg-core [xorg-video-abi-14] 2:1.14.3-4 xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information
--- End Message ---
--- Begin Message ---
- To: Rainer Dorsch <ml@bokomoko.de>, 729157-done@bugs.debian.org
- Subject: Re: Bug#729157: Problem gone
- From: Julien Cristau <jcristau@debian.org>
- Date: Tue, 3 Dec 2013 22:52:19 +0100
- Message-id: <20131203215219.GC4822@betterave.cristau.org>
- In-reply-to: <[🔎] 6780465.MuSoKMAzvg@blackbox>
- References: <[🔎] 6780465.MuSoKMAzvg@blackbox>
On Tue, Dec 3, 2013 at 20:22:44 +0100, Rainer Dorsch wrote: > Hello, > > the problem which I reported a few days back disappeared again and I cannot > reproduce anymoe. > > I suggest to close the bug report since I did not upgrade xserver-xorg-video- > intel and the bug went away. > Okay then. Thanks for the followup, closing. Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---