Bug#730351: xorg: Logs when using nouveau
Package: xorg
Version: 1:7.7+4
Followup-For: Bug #730351
Here are the logs from trying out nouveau. The problem is the same but it
freezes the whole system except the cursor. Can't ctrl+alt+Fx into a shell or
anything. I had to restart my laptop 5 times until I was able to send this bug
report. Meanwhile I also tried different Nvidia drivers, nouveau, kernels, xorg
from the wheezy repos. Nothing helped.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jun 11 18:05 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2285840 Oct 5 16:07 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [Quadro NVS 140M] [10de:0429] (rev a1)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 0
KMS configuration files:
------------------------
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.11-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 SMP Debian 3.11.8-1 (2013-11-13)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 9384 Nov 24 02:12 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 9384 Nov 24 02:12 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 9384 Nov 24 02:12 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 9384 Nov 24 02:12 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 9384 Nov 24 02:12 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 43944 Nov 25 15:40 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 9.324]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 9.324] X Protocol Version 11, Revision 0
[ 9.324] Build Operating System: Linux 3.10-2-amd64 x86_64 Debian
[ 9.324] Current Operating System: Linux wheezynut 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64
[ 9.324] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-amd64 root=UUID=47612482-ca33-4fc3-9cd1-c678dabe8641 ro quiet libata.force=X:80c
[ 9.324] Build Date: 05 October 2013 02:04:26PM
[ 9.324] xorg-server 2:1.14.3-4 (Julien Cristau <jcristau@debian.org>)
[ 9.324] Current version of pixman: 0.30.2
[ 9.324] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.324] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.324] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 25 12:37:20 2013
[ 9.328] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.329] (==) No Layout section. Using the first Screen section.
[ 9.329] (==) No screen section available. Using defaults.
[ 9.329] (**) |-->Screen "Default Screen Section" (0)
[ 9.329] (**) | |-->Monitor "<default monitor>"
[ 9.330] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.330] (==) Automatically adding devices
[ 9.330] (==) Automatically enabling devices
[ 9.330] (==) Automatically adding GPU devices
[ 9.336] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.336] Entry deleted from font path.
[ 9.345] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 9.345] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.345] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.347] (II) Loader magic: 0x7faacc0d6d00
[ 9.347] (II) Module ABI versions:
[ 9.347] X.Org ANSI C Emulation: 0.4
[ 9.347] X.Org Video Driver: 14.1
[ 9.347] X.Org XInput driver : 19.1
[ 9.347] X.Org Server Extension : 7.0
[ 9.347] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.350] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
[ 9.350] (II) Open ACPI successful (/var/run/acpid.socket)
[ 9.351] Initializing built-in extension Generic Event Extension
[ 9.351] Initializing built-in extension SHAPE
[ 9.351] Initializing built-in extension MIT-SHM
[ 9.351] Initializing built-in extension XInputExtension
[ 9.351] Initializing built-in extension XTEST
[ 9.351] Initializing built-in extension BIG-REQUESTS
[ 9.351] Initializing built-in extension SYNC
[ 9.351] Initializing built-in extension XKEYBOARD
[ 9.351] Initializing built-in extension XC-MISC
[ 9.351] Initializing built-in extension SECURITY
[ 9.351] Initializing built-in extension XINERAMA
[ 9.351] Initializing built-in extension XFIXES
[ 9.352] Initializing built-in extension RENDER
[ 9.352] Initializing built-in extension RANDR
[ 9.352] Initializing built-in extension COMPOSITE
[ 9.352] Initializing built-in extension DAMAGE
[ 9.352] Initializing built-in extension MIT-SCREEN-SAVER
[ 9.352] Initializing built-in extension DOUBLE-BUFFER
[ 9.352] Initializing built-in extension RECORD
[ 9.352] Initializing built-in extension DPMS
[ 9.352] Initializing built-in extension X-Resource
[ 9.352] Initializing built-in extension XVideo
[ 9.352] Initializing built-in extension XVideo-MotionCompensation
[ 9.352] Initializing built-in extension SELinux
[ 9.352] Initializing built-in extension XFree86-VidModeExtension
[ 9.352] Initializing built-in extension XFree86-DGA
[ 9.352] Initializing built-in extension XFree86-DRI
[ 9.352] Initializing built-in extension DRI2
[ 9.352] (II) LoadModule: "glx"
[ 9.353] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.358] (II) Module glx: vendor="X.Org Foundation"
[ 9.358] compiled for 1.14.3, module version = 1.0.0
[ 9.358] ABI class: X.Org Server Extension, version 7.0
[ 9.358] (==) AIGLX enabled
[ 9.359] Loading extension GLX
[ 9.359] (==) Matched nouveau as autoconfigured driver 0
[ 9.359] (==) Matched nv as autoconfigured driver 1
[ 9.359] (==) Matched nouveau as autoconfigured driver 2
[ 9.359] (==) Matched nv as autoconfigured driver 3
[ 9.359] (==) Matched vesa as autoconfigured driver 4
[ 9.359] (==) Matched modesetting as autoconfigured driver 5
[ 9.359] (==) Matched fbdev as autoconfigured driver 6
[ 9.359] (==) Assigned the driver to the xf86ConfigLayout
[ 9.359] (II) LoadModule: "nouveau"
[ 9.364] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 9.366] (II) Module nouveau: vendor="X.Org Foundation"
[ 9.366] compiled for 1.14.3, module version = 1.0.10
[ 9.366] Module class: X.Org Video Driver
[ 9.366] ABI class: X.Org Video Driver, version 14.1
[ 9.366] (II) LoadModule: "nv"
[ 9.367] (WW) Warning, couldn't open module nv
[ 9.367] (II) UnloadModule: "nv"
[ 9.367] (II) Unloading nv
[ 9.367] (EE) Failed to load module "nv" (module does not exist, 0)
[ 9.367] (II) LoadModule: "vesa"
[ 9.367] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9.367] (II) Module vesa: vendor="X.Org Foundation"
[ 9.367] compiled for 1.14.3, module version = 2.3.3
[ 9.368] Module class: X.Org Video Driver
[ 9.368] ABI class: X.Org Video Driver, version 14.1
[ 9.368] (II) LoadModule: "modesetting"
[ 9.368] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.369] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.369] compiled for 1.14.3, module version = 0.8.0
[ 9.369] Module class: X.Org Video Driver
[ 9.369] ABI class: X.Org Video Driver, version 14.1
[ 9.369] (II) LoadModule: "fbdev"
[ 9.369] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 9.369] (II) Module fbdev: vendor="X.Org Foundation"
[ 9.369] compiled for 1.14.3, module version = 0.4.4
[ 9.369] Module class: X.Org Video Driver
[ 9.369] ABI class: X.Org Video Driver, version 14.1
[ 9.369] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 9.369] (II) NOUVEAU driver for NVIDIA chipset families :
[ 9.369] RIVA TNT (NV04)
[ 9.370] RIVA TNT2 (NV05)
[ 9.370] GeForce 256 (NV10)
[ 9.370] GeForce 2 (NV11, NV15)
[ 9.370] GeForce 4MX (NV17, NV18)
[ 9.370] GeForce 3 (NV20)
[ 9.370] GeForce 4Ti (NV25, NV28)
[ 9.370] GeForce FX (NV3x)
[ 9.370] GeForce 6 (NV4x)
[ 9.370] GeForce 7 (G7x)
[ 9.370] GeForce 8 (G8x)
[ 9.370] GeForce GTX 200 (NVA0)
[ 9.370] GeForce GTX 400 (NVC0)
[ 9.370] (II) VESA: driver for VESA chipsets: vesa
[ 9.370] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.370] (II) FBDEV: driver for framebuffer: fbdev
[ 9.370] (++) using VT number 7
[ 9.372] (II) [drm] nouveau interface version: 1.1.1
[ 9.373] (WW) Falling back to old probe method for vesa
[ 9.373] (WW) Falling back to old probe method for modesetting
[ 9.373] (WW) Falling back to old probe method for fbdev
[ 9.373] (II) Loading sub module "fbdevhw"
[ 9.373] (II) LoadModule: "fbdevhw"
[ 9.373] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 9.373] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 9.373] compiled for 1.14.3, module version = 0.0.2
[ 9.373] ABI class: X.Org Video Driver, version 14.1
[ 9.373] (II) Loading sub module "dri2"
[ 9.373] (II) LoadModule: "dri2"
[ 9.373] (II) Module "dri2" already built-in
[ 9.373] (--) NOUVEAU(0): Chipset: "NVIDIA NV86"
[ 9.374] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.374] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 9.374] (==) NOUVEAU(0): RGB weight 888
[ 9.374] (==) NOUVEAU(0): Default visual is TrueColor
[ 9.374] (==) NOUVEAU(0): Using HW cursor
[ 9.374] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 9.374] (==) NOUVEAU(0): Page flipping enabled
[ 9.374] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 9.420] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 9.431] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 9.459] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 9.489] (II) NOUVEAU(0): EDID for output LVDS-1
[ 9.489] (II) NOUVEAU(0): Manufacturer: IBM Model: 2887 Serial#: 0
[ 9.489] (II) NOUVEAU(0): Year: 2005 Week: 0
[ 9.489] (II) NOUVEAU(0): EDID Version: 1.3
[ 9.489] (II) NOUVEAU(0): Digital Display Input
[ 9.489] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 9.489] (II) NOUVEAU(0): Gamma: 2.20
[ 9.489] (II) NOUVEAU(0): No DPMS capabilities specified
[ 9.489] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.489] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 9.489] (II) NOUVEAU(0): redX: 0.596 redY: 0.347 greenX: 0.335 greenY: 0.543
[ 9.489] (II) NOUVEAU(0): blueX: 0.158 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
[ 9.489] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 9.490] (II) NOUVEAU(0): Supported detailed timing:
[ 9.490] (II) NOUVEAU(0): clock: 120.6 MHz Image Size: 331 x 207 mm
[ 9.490] (II) NOUVEAU(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
[ 9.490] (II) NOUVEAU(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
[ 9.490] (II) NOUVEAU(0): Supported detailed timing:
[ 9.490] (II) NOUVEAU(0): clock: 100.5 MHz Image Size: 331 x 207 mm
[ 9.490] (II) NOUVEAU(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
[ 9.490] (II) NOUVEAU(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
[ 9.490] (II) NOUVEAU(0): Unknown vendor-specific block f
[ 9.490] (II) NOUVEAU(0): LP154W02-TL06
[ 9.490] (II) NOUVEAU(0): EDID (in hex):
[ 9.490] (II) NOUVEAU(0): 00ffffffffffff00244d872800000000
[ 9.490] (II) NOUVEAU(0): 000f0103802115780abca59858558b28
[ 9.490] (II) NOUVEAU(0): 24505400000001010101010101010101
[ 9.490] (II) NOUVEAU(0): 0101010101011c2f90d0601a0f402030
[ 9.490] (II) NOUVEAU(0): 13004bcf10000019452790d0601a0f40
[ 9.490] (II) NOUVEAU(0): 203013004bcf100000190000000f00b3
[ 9.490] (II) NOUVEAU(0): 0a32b30a28140100320c0000000000fe
[ 9.490] (II) NOUVEAU(0): 004c503135345730322d544c303600bf
[ 9.490] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 9.490] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 9.490] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "1680x1050"x50.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 9.490] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 9.501] (II) NOUVEAU(0): EDID for output VGA-1
[ 9.501] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 9.501] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.501] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.501] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.501] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 9.501] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 9.529] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 9.529] (II) NOUVEAU(0): Manufacturer: ENC Model: 1733 Serial#: 16843009
[ 9.529] (II) NOUVEAU(0): Year: 2005 Week: 5
[ 9.529] (II) NOUVEAU(0): EDID Version: 1.2
[ 9.529] (II) NOUVEAU(0): Digital Display Input
[ 9.529] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 9.529] (II) NOUVEAU(0): Gamma: 2.20
[ 9.529] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 9.529] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.529] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 9.529] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 9.529] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 9.529] (II) NOUVEAU(0): Supported established timings:
[ 9.529] (II) NOUVEAU(0): 720x400@70Hz
[ 9.529] (II) NOUVEAU(0): 640x480@60Hz
[ 9.529] (II) NOUVEAU(0): 800x600@60Hz
[ 9.529] (II) NOUVEAU(0): 1024x768@60Hz
[ 9.529] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 9.529] (II) NOUVEAU(0): Supported standard timings:
[ 9.529] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 9.529] (II) NOUVEAU(0): Supported detailed timing:
[ 9.529] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 9.529] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 9.529] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 9.529] (II) NOUVEAU(0): Serial No: 85569015
[ 9.529] (II) NOUVEAU(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[ 9.529] (II) NOUVEAU(0): Monitor name: L568
[ 9.529] (II) NOUVEAU(0): EDID (in hex):
[ 9.529] (II) NOUVEAU(0): 00ffffffffffff0015c3331701010101
[ 9.529] (II) NOUVEAU(0): 050f010280221b78eaee95a3544c9926
[ 9.529] (II) NOUVEAU(0): 0f5054a1080081800101010101010101
[ 9.529] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 9.529] (II) NOUVEAU(0): 1300520e1100001e000000ff00383535
[ 9.529] (II) NOUVEAU(0): 36393031350a20202020000000fd003b
[ 9.529] (II) NOUVEAU(0): 3d1f400b000a202020202020000000fc
[ 9.529] (II) NOUVEAU(0): 004c3536380a202020202020202000fd
[ 9.529] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 9.529] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.529] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.529] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.529] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.529] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.529] (II) NOUVEAU(0): Output LVDS-1 connected
[ 9.529] (II) NOUVEAU(0): Output VGA-1 connected
[ 9.529] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 9.529] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 9.529] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1024x768
[ 9.529] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 9.529] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1024x768
[ 9.529] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.529] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 9.529] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 9.529] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.529] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 9.529] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.529] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 9.529] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.529] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 9.529] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.529] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 9.529] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.529] (==) NOUVEAU(0): DPI set to (96, 96)
[ 9.529] (II) Loading sub module "fb"
[ 9.529] (II) LoadModule: "fb"
[ 9.530] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.531] (II) Module fb: vendor="X.Org Foundation"
[ 9.531] compiled for 1.14.3, module version = 1.0.0
[ 9.531] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.531] (II) Loading sub module "exa"
[ 9.531] (II) LoadModule: "exa"
[ 9.531] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.532] (II) Module exa: vendor="X.Org Foundation"
[ 9.532] compiled for 1.14.3, module version = 2.6.0
[ 9.532] ABI class: X.Org Video Driver, version 14.1
[ 9.532] (II) Loading sub module "shadowfb"
[ 9.532] (II) LoadModule: "shadowfb"
[ 9.532] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 9.533] (II) Module shadowfb: vendor="X.Org Foundation"
[ 9.533] compiled for 1.14.3, module version = 1.0.0
[ 9.533] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.533] (II) UnloadModule: "vesa"
[ 9.533] (II) Unloading vesa
[ 9.533] (II) UnloadModule: "modesetting"
[ 9.533] (II) Unloading modesetting
[ 9.533] (II) UnloadModule: "fbdev"
[ 9.533] (II) Unloading fbdev
[ 9.533] (II) UnloadSubModule: "fbdevhw"
[ 9.533] (II) Unloading fbdevhw
[ 9.533] (--) Depth 24 pixmap format is 32 bpp
[ 9.534] (II) NOUVEAU(0): Opened GPU channel 0
[ 9.541] (II) NOUVEAU(0): [DRI2] Setup complete
[ 9.541] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 9.542] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 9.544] (II) EXA(0): Driver allocated offscreen pixmaps
[ 9.544] (II) EXA(0): Driver registered support for the following operations:
[ 9.544] (II) Solid
[ 9.544] (II) Copy
[ 9.544] (II) Composite (RENDER acceleration)
[ 9.544] (II) UploadToScreen
[ 9.544] (II) DownloadFromScreen
[ 9.544] (==) NOUVEAU(0): Backing store disabled
[ 9.544] (==) NOUVEAU(0): Silken mouse enabled
[ 9.544] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 9.544] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 9.544] (==) NOUVEAU(0): DPMS enabled
[ 9.544] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.545] (--) RandR disabled
[ 9.550] (II) SELinux: Disabled on system
[ 9.648] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 9.649] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 9.649] (II) AIGLX: enabled GLX_ARB_create_context
[ 9.649] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 9.649] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 9.649] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 9.649] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 9.650] (II) AIGLX: Loaded and initialized nouveau
[ 9.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 9.653] (II) NOUVEAU(0): NVEnterVT is called.
[ 9.775] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 9.775] resize called 1024 768
[ 9.865] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 9.865] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 9.865] (II) LoadModule: "evdev"
[ 9.865] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 9.867] (II) Module evdev: vendor="X.Org Foundation"
[ 9.867] compiled for 1.14.3, module version = 2.8.2
[ 9.867] Module class: X.Org XInput Driver
[ 9.867] ABI class: X.Org XInput driver, version 19.1
[ 9.867] (II) Using input driver 'evdev' for 'Power Button'
[ 9.867] (**) Power Button: always reports core events
[ 9.867] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 9.867] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 9.867] (--) evdev: Power Button: Found keys
[ 9.867] (II) evdev: Power Button: Configuring as keyboard
[ 9.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 9.867] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 9.867] (**) Option "xkb_rules" "evdev"
[ 9.867] (**) Option "xkb_model" "pc105"
[ 9.867] (**) Option "xkb_layout" "us"
[ 9.867] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 9.867] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 9.867] (II) Using input driver 'evdev' for 'Video Bus'
[ 9.867] (**) Video Bus: always reports core events
[ 9.867] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 9.867] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 9.868] (--) evdev: Video Bus: Found keys
[ 9.868] (II) evdev: Video Bus: Configuring as keyboard
[ 9.868] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4/event4"
[ 9.868] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 9.868] (**) Option "xkb_rules" "evdev"
[ 9.868] (**) Option "xkb_model" "pc105"
[ 9.868] (**) Option "xkb_layout" "us"
[ 9.868] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 9.868] (II) No input driver specified, ignoring this device.
[ 9.868] (II) This device may have been added with another device file.
[ 9.868] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 9.868] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 9.868] (II) Using input driver 'evdev' for 'Sleep Button'
[ 9.868] (**) Sleep Button: always reports core events
[ 9.868] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 9.868] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 9.868] (--) evdev: Sleep Button: Found keys
[ 9.868] (II) evdev: Sleep Button: Configuring as keyboard
[ 9.868] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 9.868] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 9.868] (**) Option "xkb_rules" "evdev"
[ 9.868] (**) Option "xkb_model" "pc105"
[ 9.868] (**) Option "xkb_layout" "us"
[ 9.869] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 9.869] (II) config/udev: Adding input device STV06xx (/dev/input/event9)
[ 9.869] (**) STV06xx: Applying InputClass "evdev keyboard catchall"
[ 9.869] (II) Using input driver 'evdev' for 'STV06xx'
[ 9.869] (**) STV06xx: always reports core events
[ 9.869] (**) evdev: STV06xx: Device: "/dev/input/event9"
[ 9.869] (--) evdev: STV06xx: Vendor 0x46d Product 0x8f0
[ 9.869] (--) evdev: STV06xx: Found keys
[ 9.869] (II) evdev: STV06xx: Configuring as keyboard
[ 9.869] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb6/6-4/6-4.1/input/input9/event9"
[ 9.869] (II) XINPUT: Adding extended input device "STV06xx" (type: KEYBOARD, id 9)
[ 9.869] (**) Option "xkb_rules" "evdev"
[ 9.869] (**) Option "xkb_model" "pc105"
[ 9.869] (**) Option "xkb_layout" "us"
[ 9.869] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 9.869] (II) No input driver specified, ignoring this device.
[ 9.869] (II) This device may have been added with another device file.
[ 9.870] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 9.870] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 9.870] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 9.870] (**) AT Translated Set 2 keyboard: always reports core events
[ 9.870] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 9.870] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 9.870] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 9.870] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 9.870] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 9.870] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 9.870] (**) Option "xkb_rules" "evdev"
[ 9.870] (**) Option "xkb_model" "pc105"
[ 9.870] (**) Option "xkb_layout" "us"
[ 9.870] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 9.870] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 9.870] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 9.870] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 9.870] (II) LoadModule: "synaptics"
[ 9.870] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 9.871] (II) Module synaptics: vendor="X.Org Foundation"
[ 9.871] compiled for 1.14.3, module version = 1.7.1
[ 9.871] Module class: X.Org XInput Driver
[ 9.871] ABI class: X.Org XInput driver, version 19.1
[ 9.871] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 9.871] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 9.871] (**) Option "Device" "/dev/input/event8"
[ 10.142] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 93)
[ 10.142] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 125)
[ 10.142] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10.142] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 10.142] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 10.143] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 10.143] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.143] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.276] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 10.276] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 10.276] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10.276] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 10.276] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 10.277] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10.277] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10.277] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10.277] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10.277] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.277] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10.277] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 10.278] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 10.278] (II) No input driver specified, ignoring this device.
[ 10.278] (II) This device may have been added with another device file.
[ 10.279] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 10.279] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 10.279] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 10.279] (**) ThinkPad Extra Buttons: always reports core events
[ 10.279] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 10.279] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 10.279] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 10.279] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 10.280] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 10.280] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[ 10.280] (**) Option "xkb_rules" "evdev"
[ 10.280] (**) Option "xkb_model" "pc105"
[ 10.280] (**) Option "xkb_layout" "us"
[ 10.281] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/event10)
[ 10.281] (II) No input driver specified, ignoring this device.
[ 10.281] (II) This device may have been added with another device file.
[ 10.281] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/js0)
[ 10.281] (II) No input driver specified, ignoring this device.
[ 10.281] (II) This device may have been added with another device file.
[ 10.282] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/event11)
[ 10.282] (II) No input driver specified, ignoring this device.
[ 10.282] (II) This device may have been added with another device file.
[ 10.282] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/js1)
[ 10.283] (II) No input driver specified, ignoring this device.
[ 10.283] (II) This device may have been added with another device file.
[ 10.283] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[ 10.283] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 10.283] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 10.283] (**) ACPI Virtual Keyboard Device: always reports core events
[ 10.283] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[ 10.283] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 10.283] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 10.283] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 10.284] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[ 10.284] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[ 10.284] (**) Option "xkb_rules" "evdev"
[ 10.284] (**) Option "xkb_model" "pc105"
[ 10.284] (**) Option "xkb_layout" "us"
[ 10.292] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 10.292] (II) No input driver specified, ignoring this device.
[ 10.292] (II) This device may have been added with another device file.
[ 10.293] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event13)
[ 10.293] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 10.293] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 10.293] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 10.293] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event13"
[ 10.293] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 10.293] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 10.293] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 10.293] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 10.293] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 10.293] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 10.293] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.293] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input13/event13"
[ 10.293] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 10.293] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 10.293] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 10.293] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 10.293] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 10.293] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 10.372] (II) NOUVEAU(0): EDID vendor "ENC", prod id 5939
[ 10.372] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 10.372] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 10.372] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 10.372] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.373] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.373] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.373] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.373] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.045] (II) NOUVEAU(0): EDID vendor "ENC", prod id 5939
[ 11.045] (II) NOUVEAU(0): Using hsync ranges from config file
[ 11.045] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 11.045] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 11.045] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 11.045] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.045] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.045] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.045] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.689] (II) NOUVEAU(0): EDID vendor "ENC", prod id 5939
[ 11.689] (II) NOUVEAU(0): Using hsync ranges from config file
[ 11.689] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 11.689] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 11.689] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 11.689] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.689] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.689] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.689] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.766] (II) NOUVEAU(0): EDID vendor "ENC", prod id 5939
[ 11.766] (II) NOUVEAU(0): Using hsync ranges from config file
[ 11.766] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 11.766] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 11.766] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 11.766] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.766] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.766] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.766] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.156] (II) NOUVEAU(0): EDID vendor "ENC", prod id 5939
[ 18.156] (II) NOUVEAU(0): Using hsync ranges from config file
[ 18.156] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 18.156] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 18.156] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 18.156] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.156] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.156] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.156] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.260] resize called 1680 1050
[ 18.917] (II) NOUVEAU(0): EDID vendor "ENC", prod id 5939
[ 18.917] (II) NOUVEAU(0): Using hsync ranges from config file
[ 18.917] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 18.917] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 18.917] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 18.917] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.917] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.917] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.917] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.111] (II) NOUVEAU(0): EDID vendor "IBM", prod id 10375
[ 19.111] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 19.111] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz eP)
[ 19.111] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz e)
[ 179.002] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse2)
[ 179.002] (II) No input driver specified, ignoring this device.
[ 179.002] (II) This device may have been added with another device file.
[ 179.002] (II) config/udev: Adding input device Logitech G500 (/dev/input/event14)
[ 179.002] (**) Logitech G500: Applying InputClass "evdev pointer catchall"
[ 179.002] (II) Using input driver 'evdev' for 'Logitech G500'
[ 179.002] (**) Logitech G500: always reports core events
[ 179.002] (**) evdev: Logitech G500: Device: "/dev/input/event14"
[ 179.002] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[ 179.002] (--) evdev: Logitech G500: Found 20 mouse buttons
[ 179.002] (--) evdev: Logitech G500: Found scroll wheel(s)
[ 179.002] (--) evdev: Logitech G500: Found relative axes
[ 179.002] (--) evdev: Logitech G500: Found x and y relative axes
[ 179.002] (II) evdev: Logitech G500: Configuring as mouse
[ 179.002] (II) evdev: Logitech G500: Adding scrollwheel support
[ 179.002] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[ 179.002] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 179.002] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input14/event14"
[ 179.003] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE, id 15)
[ 179.003] (II) evdev: Logitech G500: initialized for relative axes.
[ 179.003] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 179.003] (**) Logitech G500: (accel) acceleration profile 0
[ 179.003] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 179.003] (**) Logitech G500: (accel) acceleration threshold: 4
[ 179.013] (II) config/udev: Adding input device Logitech G500 (/dev/input/event15)
[ 179.013] (**) Logitech G500: Applying InputClass "evdev keyboard catchall"
[ 179.013] (II) Using input driver 'evdev' for 'Logitech G500'
[ 179.013] (**) Logitech G500: always reports core events
[ 179.013] (**) evdev: Logitech G500: Device: "/dev/input/event15"
[ 179.013] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[ 179.013] (--) evdev: Logitech G500: Found 1 mouse buttons
[ 179.013] (--) evdev: Logitech G500: Found scroll wheel(s)
[ 179.013] (--) evdev: Logitech G500: Found relative axes
[ 179.013] (II) evdev: Logitech G500: Forcing relative x/y axes to exist.
[ 179.013] (--) evdev: Logitech G500: Found absolute axes
[ 179.013] (II) evdev: Logitech G500: Forcing absolute x/y axes to exist.
[ 179.014] (--) evdev: Logitech G500: Found keys
[ 179.014] (II) evdev: Logitech G500: Configuring as mouse
[ 179.014] (II) evdev: Logitech G500: Configuring as keyboard
[ 179.014] (II) evdev: Logitech G500: Adding scrollwheel support
[ 179.014] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[ 179.014] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 179.014] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input15/event15"
[ 179.014] (II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD, id 16)
[ 179.014] (**) Option "xkb_rules" "evdev"
[ 179.014] (**) Option "xkb_model" "pc105"
[ 179.014] (**) Option "xkb_layout" "us"
[ 179.014] (II) evdev: Logitech G500: initialized for relative axes.
[ 179.014] (WW) evdev: Logitech G500: ignoring absolute axes.
[ 179.014] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 179.014] (**) Logitech G500: (accel) acceleration profile 0
[ 179.014] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 179.014] (**) Logitech G500: (accel) acceleration threshold: 4
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=85652
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: DMI_VENDOR=LENOVO
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14677
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_01
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=99016
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4/event4
E: DMI_VENDOR=LENOVO
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:01
E: ID_PATH_TAG=acpi-LNXVIDEO_01
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14794
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
E: EV=21
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: TAGS=:seat:
E: USEC_INITIALIZED=82566
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1
N: input/event1
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14453
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0E_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: KEY=4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: PRODUCT=19/0/3/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=84934
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2
E: DMI_VENDOR=LENOVO
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14563
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.7/usb6/6-4/6-4.1/input/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb6/6-4/6-4.1/input/input9
E: EV=3
E: ID_FOR_SEAT=input-pci-0000_00_1a_7-usb-0_4_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1a.7-usb-0:4.1
E: ID_PATH_TAG=pci-0000_00_1a_7-usb-0_4_1
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v046Dp08F0e0100-e0,1,kD4,ramlsfw
E: NAME="STV06xx"
E: PHYS="usb-0000:00:1a.7-4.1/input0"
E: PRODUCT=3/46d/8f0/100
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=62500
P: /devices/pci0000:00/0000:00:1a.7/usb6/6-4/6-4.1/input/input9/event9
N: input/event9
S: input/by-path/pci-0000:00:1a.7-usb-0:4.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1a.7-usb-0:4.1-event
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb6/6-4/6-4.1/input/input9/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1a.7-usb-0:4.1
E: ID_PATH_TAG=pci-0000_00_1a_7-usb-0_4_1
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=64037
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/input/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input7
E: EV=40001
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v11D4p1984e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/11d4/1984/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=15667
P: /devices/pci0000:00/0000:00:1b.0/input/input7/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input7/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=15874
P: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input14
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=G500
E: ID_MODEL_ENC=G500
E: ID_MODEL_ID=c068
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0
E: ID_REVISION=5802
E: ID_SERIAL=Logitech_G500_3568FBA87D0018
E: ID_SERIAL_SHORT=3568FBA87D0018
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046DpC068e0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech G500"
E: PHYS="usb-0000:00:1d.0-2/input0"
E: PRODUCT=3/46d/c068/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ="3568FBA87D0018"
E: USEC_INITIALIZED=8997730
P: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input14/event14
N: input/event14
S: input/by-id/usb-Logitech_G500_3568FBA87D0018-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_G500_3568FBA87D0018-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-event-mouse
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input14/event14
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=G500
E: ID_MODEL_ENC=G500
E: ID_MODEL_ID=c068
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0
E: ID_REVISION=5802
E: ID_SERIAL=Logitech_G500_3568FBA87D0018
E: ID_SERIAL_SHORT=3568FBA87D0018
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8999730
P: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input14/mouse2
N: input/mouse2
S: input/by-id/usb-Logitech_G500_3568FBA87D0018-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_G500_3568FBA87D0018-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.0-mouse
E: DEVNAME=/dev/input/mouse2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input14/mouse2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=G500
E: ID_MODEL_ENC=G500
E: ID_MODEL_ID=c068
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_0
E: ID_REVISION=5802
E: ID_SERIAL=Logitech_G500_3568FBA87D0018
E: ID_SERIAL_SHORT=3568FBA87D0018
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=34
E: SUBSYSTEM=input
E: USEC_INITIALIZED=8999659
P: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input15
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input15
E: EV=10001f
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_0-usb-0_2_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=G500
E: ID_MODEL_ENC=G500
E: ID_MODEL_ID=c068
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_1
E: ID_REVISION=5802
E: ID_SERIAL=Logitech_G500_3568FBA87D0018
E: ID_SERIAL_SHORT=3568FBA87D0018
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=4837fff072ff32d bf54444600000000 1 30f908b17c007 ffe77bfad9415fff febeffdfffefffff fffffffffffffffe
E: MODALIAS=input:b0003v046DpC068e0111-e0,1,2,3,4,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E4,E7,E8,E9,EA,EB,F0,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,lsfw
E: MSC=10
E: NAME="Logitech G500"
E: PHYS="usb-0000:00:1d.0-2/input1"
E: PRODUCT=3/46d/c068/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ="3568FBA87D0018"
E: USEC_INITIALIZED=9007804
P: /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input15/event15
N: input/event15
S: input/by-id/usb-Logitech_G500_3568FBA87D0018-if01-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:2:1.1-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_G500_3568FBA87D0018-if01-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:2:1.1-event-kbd
E: DEVNAME=/dev/input/event15
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input15/event15
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=G500
E: ID_MODEL_ENC=G500
E: ID_MODEL_ID=c068
E: ID_PATH=pci-0000:00:1d.0-usb-0:2:1.1
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_2_1_1
E: ID_REVISION=5802
E: ID_SERIAL=Logitech_G500_3568FBA87D0018
E: ID_SERIAL_SHORT=3568FBA87D0018
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=79
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9009673
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB54-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab54
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=80810
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=LENOVO
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=14344
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input8
E: ABS=11000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input8
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e81B1-e0,1,3,k110,111,145,14A,ra0,1,18,1C,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/81b1
E: PROP=1
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=84214
P: /devices/platform/i8042/serio1/input/input8/event8
N: input/event8
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event8
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=85101
P: /devices/platform/i8042/serio1/input/input8/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=85078
P: /devices/platform/i8042/serio1/serio2/input/input13
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input13
E: EV=7
E: ID_FOR_SEAT=input-platform-i8042-serio-2
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: KEY=70000 0 0 0 0
E: MODALIAS=input:b0011v0002p000Ae0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: NAME="TPPS/2 IBM TrackPoint"
E: PHYS="synaptics-pt/serio0/input0"
E: PRODUCT=11/2/a/0
E: PROP=0
E: REL=3
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=120215
P: /devices/platform/i8042/serio1/serio2/input/input13/event13
N: input/event13
S: input/by-path/platform-i8042-serio-2-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-event-mouse
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input13/event13
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=120480
P: /devices/platform/i8042/serio1/serio2/input/input13/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-2-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-2-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input13/mouse1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-2
E: ID_PATH_TAG=platform-i8042-serio-2
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=120440
P: /devices/platform/pcspkr/input/input6
E: DEVPATH=/devices/platform/pcspkr/input/input6
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=12846
P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=15119
P: /devices/platform/thinkpad_acpi/input/input5
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input5
E: EV=33
E: ID_FOR_SEAT=input-platform-thinkpad_acpi
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: KEY=18040000 0 10000000000000 0 1501b00102004 c000000001104000 e000000000000 0
E: MODALIAS=input:b0019v17AAp5054e4101-e0,1,4,5,k71,72,73,8E,94,98,BE,BF,C2,CD,D4,E0,E1,E3,E4,EC,EE,F0,174,1D2,1DB,1DC,ram4,lsfw3,
E: MSC=10
E: NAME="ThinkPad Extra Buttons"
E: PHYS="thinkpad_acpi/input0"
E: PRODUCT=19/17aa/5054/4101
E: PROP=0
E: SUBSYSTEM=input
E: SW=8
E: TAGS=:seat:
E: USEC_INITIALIZED=71557
P: /devices/platform/thinkpad_acpi/input/input5/event5
N: input/event5
S: input/by-path/platform-thinkpad_acpi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-thinkpad_acpi-event
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input5/event5
E: DMI_VENDOR=LENOVO
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: ID_PATH_TAG=platform-thinkpad_acpi
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=14915
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/virtual/input/input10
E: ABS=3
E: DEVPATH=/devices/virtual/input/input10
E: EV=9
E: ID_INPUT=1
E: MODALIAS=input:b0019v1014p5054e6801-e0,3,kra0,1,mlsfw
E: NAME="ThinkPad HDAPS joystick emulation"
E: PHYS="hdaps/input0"
E: PRODUCT=19/1014/5054/6801
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=55822
P: /devices/virtual/input/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/virtual/input/input10/event10
E: ID_INPUT=1
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=55882
P: /devices/virtual/input/input10/js0
N: input/js0
E: DEVNAME=/dev/input/js0
E: DEVPATH=/devices/virtual/input/input10/js0
E: ID_INPUT=1
E: MAJOR=13
E: MINOR=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=55899
P: /devices/virtual/input/input11
E: ABS=3
E: DEVPATH=/devices/virtual/input/input11
E: EV=9
E: ID_INPUT=1
E: MODALIAS=input:b0019v1014p5054e4801-e0,3,kra0,1,mlsfw
E: NAME="ThinkPad HDAPS accelerometer data"
E: PHYS="hdaps/input1"
E: PRODUCT=19/1014/5054/4801
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=55915
P: /devices/virtual/input/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/virtual/input/input11/event11
E: ID_INPUT=1
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=55968
P: /devices/virtual/input/input11/js1
N: input/js1
E: DEVNAME=/dev/input/js1
E: DEVPATH=/devices/virtual/input/input11/js1
E: ID_INPUT=1
E: MAJOR=13
E: MINOR=1
E: SUBSYSTEM=input
E: USEC_INITIALIZED=56972
P: /devices/virtual/input/input12
E: DEVPATH=/devices/virtual/input/input12
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=49369
P: /devices/virtual/input/input12/event12
N: input/event12
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/virtual/input/input12/event12
E: DMI_VENDOR=LENOVO
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=49832
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.443348] Linux agpgart interface v0.103
[ 3.135621] [drm] Initialized drm 1.1.0 20060810
[ 4.368062] nouveau [ DRM] VRAM: 128 MiB
[ 4.368064] nouveau [ DRM] GART: 1048576 MiB
[ 4.368069] nouveau [ DRM] TMDS table version 2.0
[ 4.368071] nouveau [ DRM] DCB version 4.0
[ 4.368073] nouveau [ DRM] DCB outp 00: 01000323 00010034
[ 4.368075] nouveau [ DRM] DCB outp 01: 02811300 00000028
[ 4.368077] nouveau [ DRM] DCB outp 02: 02822312 00010030
[ 4.368079] nouveau [ DRM] DCB outp 03: 014333f1 0080c080
[ 4.368081] nouveau [ DRM] DCB conn 00: 0040
[ 4.368083] nouveau [ DRM] DCB conn 01: 0100
[ 4.368085] nouveau [ DRM] DCB conn 02: 1231
[ 4.368086] nouveau [ DRM] DCB conn 03: 0311
[ 4.386687] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 4.386690] nouveau W[ DRM] TV-1 has no encoders, removing
[ 4.386712] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.386713] [drm] No driver support for vblank timestamp query.
[ 4.386716] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 4.386796] nouveau [ DRM] 3 available performance level(s)
[ 4.386800] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100%
[ 4.386803] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100%
[ 4.386806] nouveau [ DRM] 2: core 400MHz shader 800MHz memory 600MHz voltage 1200mV fanspeed 100%
[ 4.386808] nouveau [ DRM] c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV
[ 4.404731] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 4.479780] nouveau [ DRM] allocated 1680x1050 fb: 0x60000, bo ffff880135ee8000
[ 5.848375] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (900, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.11-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xorg depends on:
ii gnome-terminal [x-terminal-emulator] 3.10.1-1
ii libgl1-mesa-dri 9.2.2-1
ii libgl1-mesa-glx [libgl1] 9.2.2-1
ii libglu1-mesa 9.0.0-2
ii x11-apps 7.7+1
ii x11-session-utils 7.6+2
ii x11-utils 7.7+1
ii x11-xfs-utils 7.7~1
ii x11-xkb-utils 7.7~1
ii x11-xserver-utils 7.7+1
ii xauth 1:1.0.7-1
ii xfonts-100dpi 1:1.0.3
ii xfonts-75dpi 1:1.0.3
ii xfonts-base 1:1.0.3
ii xfonts-scalable 1:1.0.3-1
ii xfonts-utils 1:7.7~1
ii xinit 1.3.2-1
ii xkb-data 2.5.1-3
ii xorg-docs-core 1:1.7-1
ii xserver-xorg 1:7.7+4
ii xterm [x-terminal-emulator] 297-1
xorg recommends no packages.
Versions of packages xorg suggests:
pn xorg-docs <none>
Versions of packages xserver-xorg depends on:
ii libc6 2.17-93
ii x11-xkb-utils 7.7~1
ii xkb-data 2.5.1-3
ii xserver-xorg-core 2:1.14.3-4
ii xserver-xorg-input-all 1:7.7+4
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.8.2-1
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.9.0-1+b1
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.7.1-2+b1
ii xserver-xorg-input-vmmouse [xorg-driver-input] 1:13.0.0-1+b1
ii xserver-xorg-input-wacom [xorg-driver-input] 0.23.0+20131011-1
ii xserver-xorg-video-all 1:7.7+4
ii xserver-xorg-video-ati [xorg-driver-video] 1:7.2.0-1+b2
ii xserver-xorg-video-cirrus [xorg-driver-video] 1:1.5.2-1+b1
ii xserver-xorg-video-fbdev [xorg-driver-video] 1:0.4.4-1
ii xserver-xorg-video-intel [xorg-driver-video] 2:2.21.15-1+b2
ii xserver-xorg-video-mach64 [xorg-driver-video] 6.9.4-1+b1
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.6.2-1+b1
ii xserver-xorg-video-modesetting [xorg-driver-video] 0.8.0-1+b2
ii xserver-xorg-video-neomagic [xorg-driver-video] 1:1.2.8-1
ii xserver-xorg-video-nouveau [xorg-driver-video] 1:1.0.10-1
ii xserver-xorg-video-openchrome [xorg-driver-video] 1:0.3.3-1
ii xserver-xorg-video-qxl [xorg-driver-video] 0.1.0-2.1
ii xserver-xorg-video-r128 [xorg-driver-video] 6.9.1-1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:7.2.0-1+b2
ii xserver-xorg-video-savage [xorg-driver-video] 1:2.3.7-2
ii xserver-xorg-video-siliconmotion [xorg-driver-video] 1:1.7.7-2
ii xserver-xorg-video-sisusb [xorg-driver-video] 1:0.9.6-2
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.5-1
ii xserver-xorg-video-trident [xorg-driver-video] 1:1.3.6-2
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.3-1+b1
ii xserver-xorg-video-vmware [xorg-driver-video] 1:13.0.1-2
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 9.2.2-1
-- no debconf information
Reply to: